In commit 560d958c6c ("xsk: add generic XSk &xdp_buff -> skb
conversion"), we introduce a helper to convert zerocopy xdp_buff to skb.
However, in the frag copy, we mistakenly ignore the frag's offset. This
commit adds the missing offset when copying frags in
xdp_copy_frags_from_zc(). This function is not used anywhere so no
backport is needed.
Signed-off-by: Bui Quang Minh <minhquangbui99@gmail.com>
Link: https://patch.msgid.link/20250426081220.40689-2-minhquangbui99@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use bpf_try_module_get()/bpf_module_put() instead of try_module_get()/
module_put() when handling default qdisc since users can assign a bpf
qdisc to it.
To trigger the bug:
$ bpftool struct_ops register bpf_qdisc_fq.bpf.o /sys/fs/bpf
$ echo bpf_fq > /proc/sys/net/core/default_qdisc
Fixes: c824034495 ("bpf: net_sched: Support implementation of Qdisc_ops in bpf")
Signed-off-by: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250429192128.3860571-1-ameryhung@gmail.com
The Rockchip RK3576 features two SATA nodes. The first, sata0, is behind
combphy0, which muxes between pcie0 and sata0.
The second, sata1, is behind combphy1, which muxes between pcie1, sata1
and usb_drd1_dwc3.
I've only been able to test sata0 on my board, but it appears to work
just fine.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250424-rk3576-sata-v1-2-23ee89c939fe@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Someone made a typo when they added the RTC to the Sige5 DTS, which
resulted in it using interrupts from GPIO0 B0 instead of GPIO0 A0. The
pinctrl entry for it wasn't typoed though, curiously enough.
The Sige5 v1.1 schematic was used to verify that GPIO0 A0 is the correct
pin for the RTC wakeup interrupt, so let's change it to that.
Fixes: 40f742b07a ("arm64: dts: rockchip: Add rk3576-armsom-sige5 board")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250429-sige5-rtc-oopsie-v1-1-8686767d0f1f@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Convert vf610-clock.txt to yaml format.
Additional changes:
- swap audio_ext and enet_ext to match existed dts order
- remove clock consumer in example
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250411212339.3273202-1-Frank.Li@nxp.com
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Sometimes engine reset fails because the engine resumes from an
incorrect RING_HEAD. Engine head failed to set to zero even after
writing into it. This is a timing issue and we experimented
different values and found out that 20ms delay works best based
on testing.
So, add a 20ms delay to let engine resumes from correct RING_HEAD.
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13968
Signed-off-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Karas <krzysztof.karas@intel.com>
Link: https://lore.kernel.org/r/20250416103640.212269-1-nitin.r.gote@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
If the CONFIG_NET_SCH_BPF configuration is not enabled,
the BPF test compilation will report the following error:
In file included from progs/bpf_qdisc_fq.c:39:
progs/bpf_qdisc_common.h:17:51: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
17 | void bpf_qdisc_skb_drop(struct sk_buff *p, struct bpf_sk_buff_ptr *to_free) __ksym;
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
309 | struct bpf_sk_buff_ptr *to_free)
| ^
progs/bpf_qdisc_fq.c:309:14: error: declaration of 'struct bpf_sk_buff_ptr' will not be visible outside of this function [-Werror,-Wvisibility]
progs/bpf_qdisc_fq.c:308:5: error: conflicting types for '____bpf_fq_enqueue'
Fixes: 11c701639b ("selftests/bpf: Add a basic fifo qdisc test")
Signed-off-by: Feng Yang <yangfeng@kylinos.cn>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://patch.msgid.link/20250428033445.58113-1-yangfeng59949@163.com
Merge drm-misc-next to get commit Fixes: fec450ca15 ("drm/display:
hdmi: provide central data authority for ACR params").
Signed-off-by: Rob Clark <robdclark@chromium.org>
The closing parentheses around the read syscall is misplaced, causing
single byte reads from the iterator instead of buf sized reads. While
the end result is the same, many more read calls than necessary are
performed.
$ tools/testing/selftests/bpf/vmtest.sh "./test_progs -t kmem_cache_iter"
145/1 kmem_cache_iter/check_task_struct:OK
145/2 kmem_cache_iter/check_slabinfo:OK
145/3 kmem_cache_iter/open_coded_iter:OK
145 kmem_cache_iter:OK
Summary: 1/3 PASSED, 0 SKIPPED, 0 FAILED
Fixes: a496d0cdc8 ("selftests/bpf: Add a test for kmem_cache_iter")
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: https://patch.msgid.link/20250428180256.1482899-1-tjmercier@google.com
Add a helper for replacing the contents of bitfield in memory
with the specified value.
Even though a helper xxx_replace_bits() is available, it is not
well documented, and only reports errors at the run time, which
will not be helpful to catch possible overflow errors due to
incorrect parameter types used.
FIELD_MODIFY(REG_FIELD_C, ®, c) is the wrapper to the code below.
reg &= ~REG_FIELD_C;
reg |= FIELD_PREP(REG_FIELD_C, c);
Yury: trim commit message, align backslashes.
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
bitmap-str.h is not self-contained, it uses bool type that is provided
in types.h and it uses __user annotation that is guaranteed to be included
with types.h. Add missing header(s) to follow IWYU (Include What You Use)
principle.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
The bitmap-str.h uses mixed style for function prototypes. Drop
the 'extern' as it easier to read and makes style aligned with
a new code in the kernel.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
__BUILD_BUG_ON_ZERO_MSG(), as introduced in [1], makes it possible to
do a static assertions in expressions. The direct benefit is to
provide a meaningful error message instead of the cryptic negative
bitfield size error message currently returned by BUILD_BUG_ON_ZERO():
./include/linux/build_bug.h:16:51: error: negative width in bit-field '<anonymous>'
16 | #define BUILD_BUG_ON_ZERO(e) ((int)(sizeof(struct { int:(-!!(e)); })))
| ^
Get rid of BUILD_BUG_ON_ZERO()'s bitfield size hack. Instead rely on
__BUILD_BUG_ON_ZERO_MSG() which in turn relies on C11's
_Static_assert().
Use some macro magic, similarly to static_assert(), to either use an
optional error message provided by the user or, when omitted, to
produce a default error message by stringifying the tested
expression. With this, for example:
BUILD_BUG_ON_ZERO(1 > 0)
would now throw:
./include/linux/compiler.h:197:62: error: static assertion failed: "1 > 0 is true"
197 | define __BUILD_BUG_ON_ZERO_MSG(e, msg) ((int)sizeof(struct {_Static_assert(!(e), msg);}))
| ^~~~~~~~~~~~~~
Finally, __BUILD_BUG_ON_ZERO_MSG() is already guarded by an:
#ifdef __CHECKER__
So no need any more for that guard clause for BUILD_BUG_ON_ZERO().
Remove it.
[1] commit d7a516c6ee ("compiler.h: Fix undefined BUILD_BUG_ON_ZERO()")
Link: https://git.kernel.org/torvalds/c/d7a516c6eeae
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://git.kernel.org/next/linux-next/c/b88937277df
Reviewed-by: Kees Cook <kees@kernel.org>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add some additional tests in lib/tests/test_bits.c to cover the
expected results of the fixed type BIT_U*() macros.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add some additional tests in lib/tests/test_bits.c to cover the
expected/non-expected values of the fixed-type GENMASK_U*() macros.
Also check that the result value matches the expected type. Since
those are known at build time, use static_assert() instead of normal
kunit tests.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Now that include/linux/bits.h implements fixed-width GENMASK_U*(), use
them to implement the i915/xe specific macros. Converting each driver
to use the generic macros are left for later, when/if other
driver-specific macros are also generalized.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Implement fixed-type BIT_U*() to help drivers add stricter checks,
like it was done for GENMASK_U*().
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Co-developed-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Add GENMASK_TYPE() which generalizes __GENMASK() to support different
types, and implement fixed-types versions of GENMASK() based on it.
The fixed-type version allows more strict checks to the min/max values
accepted, which is useful for defining registers like implemented by
i915 and xe drivers with their REG_GENMASK*() macros.
The strict checks rely on shift-count-overflow compiler check to fail
the build if a number outside of the range allowed is passed.
Example:
#define FOO_MASK GENMASK_U32(33, 4)
will generate a warning like:
include/linux/bits.h:51:27: error: right shift count >= width of type [-Werror=shift-count-overflow]
51 | type_max(t) >> (BITS_PER_TYPE(t) - 1 - (h)))))
| ^~
The result is casted to the corresponding fixed width type. For
example, GENMASK_U8() returns an u8. Note that because of the C
promotion rules, GENMASK_U8() and GENMASK_U16() will immediately be
promoted to int if used in an expression. Regardless, the main goal is
not to get the correct type, but rather to enforce more checks at
compile time.
While GENMASK_TYPE() is crafted to cover all variants, including the
already existing GENMASK(), GENMASK_ULL() and GENMASK_U128(), for the
moment, only use it for the newly introduced GENMASK_U*(). The
consolidation will be done in a separate change.
Co-developed-by: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
This is a preparation for the upcoming GENMASK_U*() and BIT_U*()
changes. After introducing those new macros, there will be a lot of
scrolling between the #if, #else and #endif.
Add a comment to the #else and #endif preprocessor macros to help keep
track of which context we are in. Also, add new lines to better
visually separate the non-asm and asm sections.
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Commit decde1fa20 ("cpumask: Add assign cpu") was merged bypassing
cpumasks reviewers. It adds atomic and non-atomic cpumask_assign_cpu()
helpers.
In the same merge window, commit 5c563ee90a ("cpumask: introduce
assign_cpu() macro") added the same functionality. So now we have it
duplicated.
__cpumask_assign_cpu() has never been used since introducing, and because
this series reworks the only user of cpumask_assign_cpu(), both functions
become a dead code.
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
The atomic cpumask_assign_cpu() follows non-atomic cpumask_setall(),
which makes the whole operation non-atomic. Fix this by relaxing to
non-atomic __assign_cpu().
Fixes: 7c1e5b9690 ("riscv: Disable preemption while handling PR_RISCV_CTX_SW_FENCEI_OFF")
Signed-off-by: Yury Norov [NVIDIA] <yury.norov@gmail.com>
The amount of memory allocated at kexec load, even with the extra memory
allocated, might not be large enough for the entire measurement list. The
indeterminate interval between kexec 'load' and 'execute' could exacerbate
this problem.
Define two new IMA events, 'kexec_load' and 'kexec_execute', to be
measured as critical data at kexec 'load' and 'execute' respectively.
Report the allocated kexec segment size, IMA binary log size and the
runtime measurements count as part of those events.
These events, and the values reported through them, serve as markers in
the IMA log to verify the IMA events are captured during kexec soft
reboot. The presence of a 'kexec_load' event in between the last two
'boot_aggregate' events in the IMA log implies this is a kexec soft
reboot, and not a cold-boot. And the absence of 'kexec_execute' event
after kexec soft reboot implies missing events in that window which
results in inconsistency with TPM PCR quotes, necessitating a cold boot
for a successful remote attestation.
These critical data events are displayed as hex encoded ascii in the
ascii_runtime_measurement_list. Verifying the critical data hash requires
calculating the hash of the decoded ascii string.
For example, to verify the 'kexec_load' data hash:
sudo cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements
| grep kexec_load | cut -d' ' -f 6 | xxd -r -p | sha256sum
To verify the 'kexec_execute' data hash:
sudo cat /sys/kernel/security/integrity/ima/ascii_runtime_measurements
| grep kexec_execute | cut -d' ' -f 6 | xxd -r -p | sha256sum
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The extra memory allocated for carrying the IMA measurement list across
kexec is hard-coded as half a PAGE. Make it configurable.
Define a Kconfig option, IMA_KEXEC_EXTRA_MEMORY_KB, to configure the
extra memory (in kb) to be allocated for IMA measurements added during
kexec soft reboot. Ensure the default value of the option is set such
that extra half a page of memory for additional measurements is allocated
for the additional measurements.
Update ima_add_kexec_buffer() function to allocate memory based on the
Kconfig option value, rather than the currently hard-coded one.
Suggested-by: Stefan Berger <stefanb@linux.ibm.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
kexec 'load' may be called multiple times. Free and realloc the buffer
only if the segment_size is changed from the previous kexec 'load' call.
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The IMA log is currently copied to the new kernel during kexec 'load' using
ima_dump_measurement_list(). However, the IMA measurement list copied at
kexec 'load' may result in loss of IMA measurements records that only
occurred after the kexec 'load'. Move the IMA measurement list log copy
from kexec 'load' to 'execute'
Make the kexec_segment_size variable a local static variable within the
file, so it can be accessed during both kexec 'load' and 'execute'.
Define kexec_post_load() as a wrapper for calling ima_kexec_post_load() and
machine_kexec_post_load(). Replace the existing direct call to
machine_kexec_post_load() with kexec_post_load().
When there is insufficient memory to copy all the measurement logs, copy as
much of the measurement list as possible.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
The IMA log is currently copied to the new kernel during kexec 'load'
using ima_dump_measurement_list(). However, the log copied at kexec
'load' may result in loss of IMA measurements that only occurred after
kexec "load'. Setup the needed infrastructure to move the IMA log copy
from kexec 'load' to 'execute'.
Define a new IMA hook ima_update_kexec_buffer() as a stub function.
It will be used to call ima_dump_measurement_list() during kexec 'execute'.
Implement ima_kexec_post_load() function to be invoked after the new
Kernel image has been loaded for kexec. ima_kexec_post_load() maps the
IMA buffer to a segment in the newly loaded Kernel. It also registers
the reboot notifier_block to trigger ima_update_kexec_buffer() at
kexec 'execute'.
Set the priority of register_reboot_notifier to INT_MIN to ensure that the
IMA log copy operation will happen at the end of the operation chain, so
that all the IMA measurement records extended into the TPM are copied
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently, the function kexec_calculate_store_digests() calculates and
stores the digest of the segment during the kexec_file_load syscall,
where the IMA segment is also allocated.
Later, the IMA segment will be updated with the measurement log at the
kexec execute stage when a kexec reboot is initiated. Therefore, the
digests should be updated for the IMA segment in the normal case. The
problem is that the content of memory segments carried over to the new
kernel during the kexec systemcall can be changed at kexec 'execute'
stage, but the size and the location of the memory segments cannot be
changed at kexec 'execute' stage.
To address this, skip the calculation and storage of the digest for the
IMA segment in kexec_calculate_store_digests() so that it is not added
to the purgatory_sha_regions.
With this change, the IMA segment is not included in the digest
calculation, storage, and verification.
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
[zohar@linux.ibm.com: Fixed Signed-off-by tag to match author's email ]
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Implement kimage_map_segment() to enable IMA to map the measurement log
list to the kimage structure during the kexec 'load' stage. This function
gathers the source pages within the specified address range, and maps them
to a contiguous virtual address range.
This is a preparation for later usage.
Implement kimage_unmap_segment() for unmapping segments using vunmap().
Cc: Eric Biederman <ebiederm@xmission.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
In the current implementation, the ima_dump_measurement_list() API is
called during the kexec "load" phase, where a buffer is allocated and
the measurement records are copied. Due to this, new events added after
kexec load but before kexec execute are not carried over to the new kernel
during kexec operation
Carrying the IMA measurement list across kexec requires allocating a
buffer and copying the measurement records. Separate allocating the
buffer and copying the measurement records into separate functions in
order to allocate the buffer at kexec 'load' and copy the measurements
at kexec 'execute'.
After moving the vfree() here at this stage in the patch set, the IMA
measurement list fails to verify when doing two consecutive "kexec -s -l"
with/without a "kexec -s -u" in between. Only after "ima: kexec: move
IMA log copy from kexec load to execute" the IMA measurement list verifies
properly with the vfree() here.
Co-developed-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Tushar Sugandhi <tusharsu@linux.microsoft.com>
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Before making the function local seq_file "file" variable file static
global, rename it to "ima_kexec_file".
Signed-off-by: Steven Chen <chenste@linux.microsoft.com>
Acked-by: Baoquan He <bhe@redhat.com>
Tested-by: Stefan Berger <stefanb@linux.ibm.com> # ppc64/kvm
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
When libperf is built alone in-source, $(OUTPUT) isn't set. This causes
the generated uapi path to resolve to '/../arch' which results in a
permissions error:
mkdir: cannot create directory '/../arch': Permission denied
Fix it by removing the preceding '/..' which means that it gets
generated either in the tools/lib/perf part of the tree or the OUTPUT
folder. Some other rules that rely on OUTPUT further refine this
conditionally depending on whether it's an in-source or out-of-source
build, but I don't think we need the extra complexity here. And this
rule is slightly different to others because the header is needed by
both libperf and Perf. This is further complicated by the fact that Perf
always passes O=... to libperf even for in source builds, meaning that
OUTPUT isn't set consistently between projects.
Because we're no longer going one level up to try to generate the file
in the tools/ folder, Perf's include rule needs to descend into libperf.
Also fix the clean rule while we're here.
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Closes: https://lore.kernel.org/linux-perf-users/7703f88e-ccb7-4c98-9da4-8aad224e780f@leemhuis.info/
Fixes: bfb713ea53 ("perf tools: Fix arm64 build by generating unistd_64.h")
Signed-off-by: James Clark <james.clark@linaro.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Link: https://lore.kernel.org/r/20250429-james-perf-fix-libperf-in-source-build-v1-1-a1a827ac15e5@linaro.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
This bit is necessary to receive packets from the internal PHY.
Without this bit set, no activity occurs on the interface.
Normally u-boot sets this bit, but if u-boot is compiled without
net support, the interface will be up but without any activity.
If bit is set once, it will work until the IP is powered down or reset.
The vendor SDK sets this bit along with the PHY_ID bits.
Signed-off-by: Da Xue <da@libre.computer>
Fixes: 9a24e1ff43 ("net: mdio: add amlogic gxl mdio mux support")
Link: https://patch.msgid.link/20250425192009.1439508-1-da@libre.computer
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As it's name suggests, parse_eeprom() parses EEPROM data.
This is done by reading data, 16 bits at a time as follows:
for (i = 0; i < 128; i++)
((__le16 *) sromdata)[i] = cpu_to_le16(read_eeprom(np, i));
sromdata is at the same memory location as psrom.
And the type of psrom is a pointer to struct t_SROM.
As can be seen in the loop above, data is stored in sromdata, and thus psrom,
as 16-bit little-endian values.
However, the integer fields of t_SROM are host byte order integers.
And in the case of led_mode this leads to a little endian value
being incorrectly treated as host byte order.
Looking at rio_set_led_mode, this does appear to be a bug as that code
masks led_mode with 0x1, 0x2 and 0x8. Logic that would be effected by a
reversed byte order.
This problem would only manifest on big endian hosts.
Found by inspection while investigating a sparse warning
regarding the crc field of t_SROM.
I believe that warning is a false positive. And although I plan
to send a follow-up to use little-endian types for other the integer
fields of PSROM_t I do not believe that will involve any bug fixes.
Compile tested only.
Fixes: c3f45d322c ("dl2k: Add support for IP1000A-based cards")
Signed-off-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250425-dlink-led-mode-v1-1-6bae3c36e736@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In preparation for making the kmalloc family of allocators type aware,
we need to make sure that the returned type from the allocation matches
the type of the variable being assigned. (Before, the allocator would
always return "void *", which can be implicitly cast to any pointer type.)
The assigned type is "struct kunit_suite **" but the returned type will
be "struct kunit_suite * const *". Since it isn't generally possible
to remove the const qualifier, adjust the allocation type to match
the assignment.
Link: https://lore.kernel.org/r/20250426062433.work.124-kees@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
With the global states and disable machinery moved into scx_sched,
scx_disable_workfn() can only be scheduled and run for the specific
scheduler instance. This makes it impossible for scx_disable_workfn() to see
SCX_EXIT_NONE. Turn that condition into WARN_ON_ONCE().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Because disable can be triggered from any place and the scheduler cannot be
trusted, disable path uses an irq_work to bounce and a kthread_work which is
executed on an RT helper kthread to perform disable. These must be per
scheduler instance to guarantee forward progress. Move them into scx_sched.
- If an scx_sched is accessible, its helper kthread is always valid making
the `helper` check in schedule_scx_disable_work() unnecessary. As the
function becomes trivial after the removal of the test, inline it.
- scx_create_rt_helper() has only one user - creation of the disable helper
kthread. Inline it into scx_alloc_and_add_sched().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
The event counters are going to become per scheduler instance. Move
event_stats_cpu into scx_sched.
- [__]scx_add_event() are updated to take @sch. While at it, add missing
parentheses around @cnt expansions.
- scx_read_events() is updated to take @sch.
- scx_bpf_events() accesses scx_root under RCU read lock.
v2: - Replace stale scx_bpf_get_event_stat() reference in a comment with
scx_bpf_events().
- Trivial goto label rename.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
In prepration of moving event_stats_cpu into scx_sched, factor out
scx_read_events() out of scx_bpf_events() and update the in-kernel users -
scx_attr_events_show() and scx_dump_state() - to use scx_read_events()
instead of scx_bpf_events(). No observable behavior changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
In prepration of moving event_stats_cpu into scx_sched, move scx_event_stats
definitions above scx_sched definition. No functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
Global DSQs are going to become per scheduler instance. Move global_dsqs
into scx_sched. find_global_dsq() already takes a task_struct pointer as an
argument and should later be able to determine the scx_sched to use from
that. For now, assume scx_root.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
User DSQs are going to become per scheduler instance. Move dsq_hash into
scx_sched. This shifts the code that assumes scx_root to be the only
scx_sched instance up the call stack but doesn't remove them yet.
v2: Add missing rcu_read_lock() in scx_bpf_destroy_dsq() as per Andrea.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
More will be moved into scx_sched. Factor out the allocation and kobject
addition path into scx_alloc_and_add_sched().
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
create_dsq() is only used by scx_bpf_create_dsq() and the separation gets in
the way of making dsq_hash per scx_sched. Inline it into
scx_bpf_create_dsq(). While at it, add unlikely() around
SCX_DSQ_FLAG_BUILTIN test.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
To prepare for supporting multiple schedulers, make scx_sched allocated
dynamically. scx_sched->kobj is now an embedded field and the kobj's
lifetime determines the lifetime of the containing scx_sched.
- Enable path is updated so that kobj init and addition are performed later.
- scx_sched freeing is initiated in scx_kobj_release() and also goes through
an rcu_work so that scx_root can be accessed from an unsynchronized path -
scx_disable().
- sched_ext_ops->priv is added and used to point to scx_sched instance
created for the ops instance. This is used by bpf_scx_unreg() to determine
the scx_sched instance to disable and put.
No behavior changes intended.
v2: Andrea reported kernel oops due to scx_bpf_unreg() trying to deref NULL
scx_root after scheduler init failure. sched_ext_ops->priv added so that
scx_bpf_unreg() can always find the scx_sched instance to unregister
even if it failed early during init.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Andrea Righi <arighi@nvidia.com>
Acked-by: Changwoo Min <changwoo@igalia.com>
