Here are 2 serial driver fixes for reported issues for 6.18-rc8.
These are:
- fix for a much reported symbol build loop that broke the build for
some kernel configurations.
- amba-pl011 driver bugfix for a reported issue
Both have been in linux next (the last for weeks, the first for a
shorter amount of time), with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaSnMaw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymg5QCfeiPTQKjBjgltevx4QCaxVMyoo54AmwTVgjub
iXAdo7xLL3tvpG1ubqgt
=y3e3
-----END PGP SIGNATURE-----
Merge tag 'tty-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull serial driver fixes from Greg KH:
"Here are two serial driver fixes for reported issues for 6.18-rc8.
These are:
- fix for a much reported symbol build loop that broke the build for
some kernel configurations
- amba-pl011 driver bugfix for a reported issue
Both have been in linux next (the last for weeks, the first for a
shorter amount of time), with no reported issues"
* tag 'tty-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: 8250: Fix 8250_rsa symbol loop
serial: amba-pl011: prefer dma_mapping_error() over explicit address checking
Here are some last-minutes USB and Thunderbolt driver fixes and new
device ids for 6.18-rc8. Included in here are:
- usb storage quirk fixup
- xhci driver fixes for reported issues
- usb gadget driver fixes
- dwc3 driver fixes
- UAS driver fixup
- thunderbolt new device ids
- usb-serial driver new ids
All of these have been in linux-next with no reported issues, many for
many weeks.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCaSnO0w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymqyACgvNvTnpfj8lx0L9aESj6Hra0UZ20AoKlYRFW1
gAVcF4Wafnu7ehjAITXL
=cH0/
-----END PGP SIGNATURE-----
Merge tag 'usb-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt fixes from Greg KH:
"Here are some last-minutes USB and Thunderbolt driver fixes and new
device ids for 6.18-rc8. Included in here are:
- usb storage quirk fixup
- xhci driver fixes for reported issues
- usb gadget driver fixes
- dwc3 driver fixes
- UAS driver fixup
- thunderbolt new device ids
- usb-serial driver new ids
All of these have been in linux-next with no reported issues, many for
many weeks"
* tag 'usb-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (21 commits)
usb: gadget: renesas_usbf: Handle devm_pm_runtime_enable() errors
USB: storage: Remove subclass and protocol overrides from Novatek quirk
usb: uas: fix urb unmapping issue when the uas device is remove during ongoing data transfer
usb: dwc3: Fix race condition between concurrent dwc3_remove_requests() call paths
xhci: dbgtty: fix device unregister
usb: storage: sddr55: Reject out-of-bound new_pba
USB: serial: option: add support for Rolling RW101R-GL
usb: typec: ucsi: psy: Set max current to zero when disconnected
usb: gadget: f_eem: Fix memory leak in eem_unwrap
usb: dwc3: pci: Sort out the Intel device IDs
usb: dwc3: pci: add support for the Intel Nova Lake -S
drivers/usb/dwc3: fix PCI parent check
usb: storage: Fix memory leak in USB bulk transport
xhci: sideband: Fix race condition in sideband unregister
xhci: dbgtty: Fix data corruption when transmitting data form DbC to host
xhci: fix stale flag preventig URBs after link state error is cleared
USB: serial: ftdi_sio: add support for u-blox EVK-M101
usb: cdns3: Fix double resource release in cdns3_pci_probe
usb: gadget: udc: fix use-after-free in usb_gadget_state_work
usb: renesas_usbhs: Fix synchronous external abort on unbind
...
Just one fix to correct the "thead,vlenb" property for the RISC-V based
D1 SoC family.
-----BEGIN PGP SIGNATURE-----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=OqKr
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 6.18
Just one fix to correct the "thead,vlenb" property for the RISC-V based
D1 SoC family.
* tag 'sunxi-fixes-for-6.18' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
riscv: dts: allwinner: d1: fix vlenb property
The purpose of the devm_add_action_or_reset() helper is to call the
action function in case adding an action ever fails so drop the clock
disable from the error path to avoid disabling the clocks twice.
Fixes: 5d4d263e1c ("mailbox: Introduce support for T-head TH1520 Mailbox driver")
Cc: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Michal Wilczynski <m.wilczynski@samsung.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The error status mask for a type 3/4 subspace is used for reading the
error status, and the bitwise inverse is used for clearing the error
with the intent being to preserve any of the non-error bits. However,
we were previously applying the mask to extract the status and then
applying the inverse to the result which ended up clearing all bits.
Instead, store the inverse mask in the preserve mask and then use that
on the original value read from the error status so that only the error
is cleared.
Fixes: c45ded7e11 ("mailbox: pcc: Add support for PCCT extended PCC subspaces(type 3/4)")
Signed-off-by: Jamie Iles <jamie.iles@oss.qualcomm.com>
Signed-off-by: Punit Agrawal <punit.agrawal@oss.qualcomm.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
mtk_gpueb_mbox_ops should be declared static. However, due to its const
nature, this specifier was missed, as it compiled fine without it and
with no warning by the compiler.
arc-linux-gcc (GCC) 12.5.0 doesn't seem to like it however, so add the
static to fix that.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202510100629.3nGvrhEU-lkp@intel.com/
Fixes: dbca0eabb8 ("mailbox: add MediaTek GPUEB IPI mailbox")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
GCE can only fetch the command buffer address from a 32-bit register.
Some SoCs support a 35-bit command buffer address for GCE, which
requires a right shift of 3 bits before setting the address into
the 32-bit register. A comment has been added to the header of
cmdq_get_shift_pa() to explain this requirement.
To prevent the GCE command buffer address from being DMA mapped beyond
its supported bit range, the DMA bit mask for the device is set during
initialization.
Additionally, to ensure the correct shift is applied when setting or
reading the register that stores the GCE command buffer address,
new APIs, cmdq_convert_gce_addr() and cmdq_revert_gce_addr(), have
been introduced for consistent operations on this register.
The variable type for the command buffer address has been standardized
to dma_addr_t to prevent handling issues caused by type mismatches.
Fixes: 0858fde496 ("mailbox: cmdq: variablize address shift in platform")
Signed-off-by: Jason-JH Lin <jason-jh.lin@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The debugfs_create_dir() function returns ERR_PTR() on error, not NULL.
The current null-check fails to catch errors.
Use IS_ERR() to correctly check for errors.
Fixes: 8ea4484d0c ("mailbox: Add generic mechanism for testing Mailbox Controllers")
Signed-off-by: Haotian Zhang <vulab@iscas.ac.cn>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
On TI K3 devices, the mailbox resides in the Always-On power domain
(LPSC_main_alwayson) and is shared among multiple processors. The
mailbox is not solely exclusive to Linux.
Currently, the suspend path checks all FIFO queues for pending messages
and blocks suspend if any are present. This behavior is unnecessary for
K3 devices, since some of the FIFOs are used for RTOS<->RTOS
communication and are independent of Linux.
For FIFOs used in Linux<->RTOS communication, any pending message would
trigger an interrupt, which naturally prevents suspend from completing.
Hence, there is no need for the mailbox driver to explicitly check for
pending messages on K3 platforms.
Introduce a device match flag to indicate whether the mailbox instance
is exclusive to Linux, and skip the pending message check for
non-exclusive instances (such as in K3).
Fixes: a49f991e74 ("arm64: dts: ti: k3-am62-verdin: Add missing cfg for TI IPC Firmware")
Closes: https://lore.kernel.org/all/sid7gtg5vay5qgicsl6smnzwg5mnneoa35cempt5ddwjvedaio@hzsgcx6oo74l/
Signed-off-by: Beleswar Padhi <b-padhi@ti.com>
Tested-by: Hiago De Franco <hiago.franco@toradex.com>
Reviewed-by: Andrew Davis <afd@ti.com>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
The allocation of a cell's anonymous key is done in a background thread
along with other cell setup such as doing a DNS upcall. In the reported
bug, this is triggered by afs_parse_source() parsing the device name given
to mount() and calling afs_lookup_cell() with the name of the cell.
The normal key lookup then tries to use the key description on the
anonymous authentication key as the reference for request_key() - but it
may not yet be set and so an oops can happen.
This has been made more likely to happen by the fix for dynamic lookup
failure.
Fix this by firstly allocating a reference name and attaching it to the
afs_cell record when the record is created. It can share the memory
allocation with the cell name (unfortunately it can't just overlap the cell
name by prepending it with "afs@" as the cell name already has a '.'
prepended for other purposes). This reference name is then passed to
request_key().
Secondly, the anon key is now allocated on demand at the point a key is
requested in afs_request_key() if it is not already allocated. A mutex is
used to prevent multiple allocation for a cell.
Thirdly, make afs_request_key_rcu() return NULL if the anonymous key isn't
yet allocated (if we need it) and then the caller can return -ECHILD to
drop out of RCU-mode and afs_request_key() can be called.
Note that the anonymous key is kind of necessary to make the key lookup
cache work as that doesn't currently cache a negative lookup, but it's
probably worth some investigation to see if NULL can be used instead.
Fixes: 330e2c5148 ("afs: Fix dynamic lookup to fail on cell lookup failure")
Reported-by: syzbot+41c68824eefb67cdf00c@syzkaller.appspotmail.com
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://patch.msgid.link/800328.1764325145@warthog.procyon.org.uk
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
- two last minute fixes for the recently modified DMA API infrastructure:
a proper handling of DMA_ATTR_MMIO in dma_iova_unlink() function (me) and
a regression fix for the code refactoring related to P2PDMA (Pranjal
Shrivastava)
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSrngzkoBtlA8uaaJ+Jp1EFxbsSRAUCaSh6UAAKCRCJp1EFxbsS
RCYGAP94GdoTEBmQL1dXLooASbHHAyB5xrd8Di1H/Aqd7maCvAEAgT2+BRPyEtf+
wiz4mwKMG1RrF9Cj4XqPqJ2NDU1zdQ8=
=ngH/
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.18-2025-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux
Pull dma-mapping fixes from Marek Szyprowski:
"Two last minute fixes for the recently modified DMA API infrastructure:
- proper handling of DMA_ATTR_MMIO in dma_iova_unlink() function (me)
- regression fix for the code refactoring related to P2PDMA (Pranjal
Shrivastava)"
* tag 'dma-mapping-6.18-2025-11-27' of git://git.kernel.org/pub/scm/linux/kernel/git/mszyprowski/linux:
dma-direct: Fix missing sg_dma_len assignment in P2PDMA bus mappings
iommu/dma: add missing support for DMA_ATTR_MMIO for dma_iova_unlink()
There is one more commit that needs to be reverted after reverting
problematic commit 7a8c994cbb ("ACPI: processor: idle: Optimize
ACPI idle driver registration"), so revert it.
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEcM8Aw/RY0dgsiRUR7l+9nS/U47UFAmkorhYSHHJqd0Byand5
c29ja2kubmV0AAoJEO5fvZ0v1OO1HmQH/1mAIwpYlmtXtW8LmGuZsrvZx4PTl8OQ
QyATMm/0+/gSWXYs79vLikwoRfT0rSEOdZcNk6AwdqeP2ciHLwCAzNnOE7vw80/s
xo7yj1SswzEZDydEhbxqRFNsJ8hl5VCU7DdsScVtuDFb/vJ0GHkQEu1DsSFJQoSL
CidC/2RCn0n5egOMdxL/GHemEbdUDGDXr2JilrcNLmcnnArN43+JqdiV8p102oSz
i8ssS/LIMUMrIMZCuJA1298pZ6Ir1WWgaodyTOYDcmq3u25SSabF5WlS2u0KGgm/
Ldgl6/lCuMxt+BBJ1r3uq9uHRAWeqY+DpHcZ7q1yFB+rOyRA9za5ERc=
=X5FV
-----END PGP SIGNATURE-----
Merge tag 'acpi-6.18-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI fix from Rafael Wysocki:
"One more urgent ACPI support fix for 6.18
There is one more commit that needs to be reverted after reverting
problematic commit 7a8c994cbb ("ACPI: processor: idle: Optimize ACPI
idle driver registration"), so revert it"
* tag 'acpi-6.18-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Revert "ACPI: processor: Update cpuidle driver check in __acpi_processor_start()"
Slava and a couple of fixes from Ziming and myself to avoid operating
on potentially invalid memory, all marked for stable.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmkomw8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi7inB/4kGwlnraCx43Lw4UG4K/Z6RKypQ8zD
WxwFvszq9jHJL7uUvXLx97sZApeK+AG6Kql/jnpEUUkFlG1h3013OwKJgRINrOdn
5wJaWwi73akCWt3FDgcpc+gnxQ3s7gbD3cPbNeEhoHTjUrHk59ZgT37zbnUIrFK3
NqnSBO7+7EPZtWwmC7mtki+lRLr3z47TqeqLqLQhw6GoenRo/9ZrUynvneCWKXfT
bZRZ5MDJGg/ZMR1agPmUojgHkkZAD5xc21fK5mmYeMr9JbNB4Vw9BO48XW+WCA3o
TH5en6HZhJuoxkp21mG7BZjnkAVTPCpo3pMt2IqlAIWCkODtXlThWGQN
=cZYx
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-6.18-rc8' of https://github.com/ceph/ceph-client
Pull ceph fixes from Ilya Dryomov:
"A patch to make sparse read handling work in msgr2 secure mode from
Slava and a couple of fixes from Ziming and myself to avoid operating
on potentially invalid memory, all marked for stable"
* tag 'ceph-for-6.18-rc8' of https://github.com/ceph/ceph-client:
libceph: prevent potential out-of-bounds writes in handle_auth_session_key()
libceph: replace BUG_ON with bounds check for map->max_osd
ceph: fix crash in process_v2_sparse_read() for encrypted directories
libceph: drop started parameter of __ceph_open_session()
libceph: fix potential use-after-free in have_mon_and_osd_map()
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth: veth: reduce XDP no_direct return section to fix race
- eth: virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth: r8169: fix RTL8127 hang on suspend/shutdown
- eth: aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCgAwFiEEg1AjqC77wbdLX2LbKSR5jcyPE6QFAmkoYU0SHHBhYmVuaUBy
ZWRoYXQuY29tAAoJECkkeY3MjxOkKXoQALd11FrsOuRQ9VH7pv5gtOkvPvdAq/q0
ZSrqaK+/sIEAm8X4OtmuzZCMM0cjsbptZ7Lcs84SlqarHj86I7O0NgRzHrE5oy5u
kK/aWcK8FNMt0h/EMPpm9sZbEjbCjT1T6k5+lpvJja5LD+aJXG2BnYxEPBFxyx/z
Au1fq8PxJTmQIAEVVlgRbCW56zaoYsic45YdQJstIfVDLi34tjm76hz97m2bUEj5
wnCrEN5Ghmn8tcuTsTv5OHEkIKXSBUpuctsviOqIgMTDquOrMa/4niSVp7N116tJ
3oOTRer38MEoI7uMAuQFP4NmaMWQcAs/ky3gFdepX81iiIXEIP/PEHucXVWCTU6N
m13TmCN7gFRNPOvFgVlWIPEMJDOkblnEvL8Mw7ux0sd235Cf8BzLiPU+XaeGo4JN
wfRit/7tzTAtP5Ft9nqT/7Cl9gshD+9/jG6binKoY1JG2aMHovYC1LmdVPYvkp25
hMGFaryZuCcGmVnWbHzwn00JWArdy5TZTEfGZvqUQsoHyPHkPrt5STpNpl3WWrzV
yjp0RxVeVF7VThm/4m2Jq17Fo7RUimo/EIosbbaqWFYZTJBM7gU6VvYca9Q0kKdW
SjzZ8Eq3G0eqWYhk1ZFvlEcZkkZNpCpb8YzWibscDCEj1Ugv6fiNXswlz5IZb+jF
UuXeTpCOEgQY
=0MuR
-----END PGP SIGNATURE-----
Merge tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and CAN. No known outstanding
regressions.
Current release - regressions:
- mptcp: initialize rcv_mss before calling tcp_send_active_reset()
- eth: mlx5e: fix validation logic in rate limiting
Previous releases - regressions:
- xsk: avoid data corruption on cq descriptor number
- bluetooth:
- prevent race in socket write iter and sock bind
- fix not generating mackey and ltk when repairing
- can:
- kvaser_usb: fix potential infinite loop in command parsers
- rcar_canfd: fix CAN-FD mode as default
- eth:
- veth: reduce XDP no_direct return section to fix race
- virtio-net: avoid unnecessary checksum calculation on guest RX
Previous releases - always broken:
- sched: fix TCF_LAYER_TRANSPORT handling in tcf_get_base_ptr()
- bluetooth: mediatek: fix kernel crash when releasing iso interface
- vhost: rewind next_avail_head while discarding descriptors
- eth:
- r8169: fix RTL8127 hang on suspend/shutdown
- aquantia: add missing descriptor cache invalidation on ATL2
- dsa: microchip: fix resource releases in error path"
* tag 'net-6.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (47 commits)
mptcp: Initialise rcv_mss before calling tcp_send_active_reset() in mptcp_do_fastclose().
net: fec: do not register PPS event for PEROUT
net: fec: do not allow enabling PPS and PEROUT simultaneously
net: fec: do not update PEROUT if it is enabled
net: fec: cancel perout_timer when PEROUT is disabled
net: mctp: unconditionally set skb->dev on dst output
net: atlantic: fix fragment overflow handling in RX path
MAINTAINERS: separate VIRTIO NET DRIVER and add netdev
virtio-net: avoid unnecessary checksum calculation on guest RX
eth: fbnic: Fix counter roll-over issue
mptcp: clear scheduled subflows on retransmit
net: dsa: sja1105: fix SGMII linking at 10M or 100M but not passing traffic
s390/net: list Aswin Karuvally as maintainer
net: wwan: mhi: Keep modem name match with Foxconn T99W640
vhost: rewind next_avail_head while discarding descriptors
net/sched: em_canid: fix uninit-value in em_canid_match
can: rcar_canfd: Fix CAN-FD mode as default
xsk: avoid data corruption on cq descriptor number
r8169: fix RTL8127 hang on suspend/shutdown
net: sxgbe: fix potential NULL dereference in sxgbe_rx()
...
Propagate fwnode of the ACPI device to the SPI controller Linux device.
Currently only OF case propagates fwnode to the controller.
While at it, replace several calls to dev_fwnode() with a single one
cached in a local variable, and unify checks for fwnode type by using
is_*_node() APIs.
Fixes: 55ab8487e0 ("spi: spi-nxp-fspi: Add ACPI support")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://patch.msgid.link/20251126202501.2319679-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Wei Fang says:
====================
net: fec: fix some PTP related issues
There are some issues which were introduced by the commit 350749b909
("net: fec: Add support for periodic output signal of PPS"). See each
patch for more details.
====================
Link: https://patch.msgid.link/20251125085210.1094306-1-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There are currently two situations that can trigger the PTP interrupt,
one is the PPS event, the other is the PEROUT event. However, the irq
handler fec_pps_interrupt() does not check the irq event type and
directly registers a PPS event into the system, but the event may be
a PEROUT event. This is incorrect because PEROUT is an output signal,
while PPS is the input of the kernel PPS system. Therefore, add a check
for the event type, if pps_enable is true, it means that the current
event is a PPS event, and then the PPS event is registered.
Fixes: 350749b909 ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-5-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the current driver, PPS and PEROUT use the same channel to generate
the events, so they cannot be enabled at the same time. Otherwise, the
later configuration will overwrite the earlier configuration. Therefore,
when configuring PPS, the driver will check whether PEROUT is enabled.
Similarly, when configuring PEROUT, the driver will check whether PPS
is enabled.
Fixes: 350749b909 ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-4-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
If the previously set PEROUT is already active, updating it will cause
the new PEROUT to start immediately instead of at the specified time.
This is because fep->reload_period is updated whithout check whether
the PEROUT is enabled, and the old PEROUT is not disabled. Therefore,
the pulse period will be updated immediately in the pulse interrupt
handler fec_pps_interrupt().
Currently, the driver does not support directly updating PEROUT and it
will make the logic be more complicated. To fix the current issue, add
a check before enabling the PEROUT, the driver will return an error if
PEROUT is enabled. If users wants to update a new PEROUT, they should
disable the old PEROUT first.
Fixes: 350749b909 ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-3-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The PEROUT allows the user to set a specified future time to output the
periodic signal. If the future time is far from the current time, the FEC
driver will use hrtimer to configure PEROUT one second before the future
time. However, the hrtimer will not be canceled if the PEROUT is disabled
before the hrtimer expires. So the PEROUT will be configured when the
hrtimer expires, which is not as expected. Therefore, cancel the hrtimer
in fec_ptp_pps_disable() to fix this issue.
Fixes: 350749b909 ("net: fec: Add support for periodic output signal of PPS")
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20251125085210.1094306-2-wei.fang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On transmit, we are currently relying on skb->dev being set by
mctp_local_output() when we first set up the skb destination fields.
However, forwarded skbs do not use the local_output path, so will retain
their incoming netdev as their ->dev on tx. This does not work when
we're forwarding between interfaces.
Set skb->dev unconditionally in the transmit path, to allow for proper
forwarding.
We keep the skb->dev initialisation in mctp_local_output(), as we use it
for fragmentation.
Fixes: 269936db5e ("net: mctp: separate routing database from routing operations")
Suggested-by: Vince Chang <vince_chang@aspeedtech.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20251125-dev-forward-v1-1-54ecffcd0616@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The len field originates from untrusted network packets. Boundary
checks have been added to prevent potential out-of-bounds writes when
decrypting the connection secret or processing service tickets.
[ idryomov: changelog ]
Cc: stable@vger.kernel.org
Signed-off-by: ziming zhang <ezrakiez@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
OSD indexes come from untrusted network packets. Boundary checks are
added to validate these against map->max_osd.
[ idryomov: drop BUG_ON in ceph_get_primary_affinity(), minor cosmetic
edits ]
Cc: stable@vger.kernel.org
Signed-off-by: ziming zhang <ezrakiez@gmail.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEn/sM2K9nqF/8FWzzDHRl3/mQkZwFAmknHroTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAMdGXf+ZCRnENfCACmEL7NELoRi3RvXzlYOjDi0aEW2C79
k9hPBkzBor/W9JhBOf7+3nbDiL8nJdMQIs3FY6X/OSgyxEvGwgXb+PiFVBaHtDmx
PvJb7PjwNjpm4GnoPlQVUGBZxH4fDWz7JS34M1+BbY8k1ajN6ndHURHE6rtGMFIM
obClghS9i4K/Uww/bpSzj5cU4AmIuLIU8X6Oqq2X1PacgtGYP8WNh/eQ1xk03Nt8
RxrU0XTkPTsbS74Y4h+1bwNhxMwjLA97f2GgZ6GUa22lrzDnBpfqpBWSy0xIDJTe
GZgKpBOhbFSRjPH8f89cRXz47jvMfReC05ccuKC82+RK94Yge8F1YIxP
=HPfp
-----END PGP SIGNATURE-----
Merge tag 'linux-can-fixes-for-6.18-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can
Marc Kleine-Budde says:
====================
pull-request: can 2025-11-26
this is a pull request of 8 patches for net/main.
Seungjin Bae provides a patch for the kvaser_usb driver to fix a
potential infinite loop in the USB data stream command parser.
Thomas Mühlbacher's patch for the sja1000 driver IRQ handler's max
loop handling, that might lead to unhandled interrupts.
3 patches by me for the gs_usb driver fix handling of failed transmit
URBs and add checking of the actual length of received URBs before
accessing the data.
The next patch is by me and is a port of Thomas Mühlbacher's patch
(fix IRQ handler's max loop handling, that might lead to unhandled
interrupts.) to the sun4i_can driver.
Biju Das provides a patch for the rcar_canfd driver to fix the CAN-FD
mode setting.
The last patch is by Shaurya Rane for the em_canid filter to ensure
that the complete CAN frame is present in the linear data buffer
before accessing it.
* tag 'linux-can-fixes-for-6.18-20251126' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
net/sched: em_canid: fix uninit-value in em_canid_match
can: rcar_canfd: Fix CAN-FD mode as default
can: sun4i_can: sun4i_can_interrupt(): fix max irq loop handling
can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing data
can: gs_usb: gs_usb_receive_bulk_callback(): check actual_length before accessing header
can: gs_usb: gs_usb_xmit_callback(): fix handling of failed transmitted URBs
can: sja1000: fix max irq loop handling
can: kvaser_usb: leaf: Fix potential infinite loop in command parsers
====================
Link: https://patch.msgid.link/20251126155713.217105-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The atlantic driver can receive packets with more than MAX_SKB_FRAGS (17)
fragments when handling large multi-descriptor packets. This causes an
out-of-bounds write in skb_add_rx_frag_netmem() leading to kernel panic.
The issue occurs because the driver doesn't check the total number of
fragments before calling skb_add_rx_frag(). When a packet requires more
than MAX_SKB_FRAGS fragments, the fragment index exceeds the array bounds.
Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE,
then all fragments are accounted for. And reusing the existing check to
prevent the overflow earlier in the code path.
This crash occurred in production with an Aquantia AQC113 10G NIC.
Stack trace from production environment:
```
RIP: 0010:skb_add_rx_frag_netmem+0x29/0xd0
Code: 90 f3 0f 1e fa 0f 1f 44 00 00 48 89 f8 41 89
ca 48 89 d7 48 63 ce 8b 90 c0 00 00 00 48 c1 e1 04 48 01 ca 48 03 90
c8 00 00 00 <48> 89 7a 30 44 89 52 3c 44 89 42 38 40 f6 c7 01 75 74 48
89 fa 83
RSP: 0018:ffffa9bec02a8d50 EFLAGS: 00010287
RAX: ffff925b22e80a00 RBX: ffff925ad38d2700 RCX:
fffffffe0a0c8000
RDX: ffff9258ea95bac0 RSI: ffff925ae0a0c800 RDI:
0000000000037a40
RBP: 0000000000000024 R08: 0000000000000000 R09:
0000000000000021
R10: 0000000000000848 R11: 0000000000000000 R12:
ffffa9bec02a8e24
R13: ffff925ad8615570 R14: 0000000000000000 R15:
ffff925b22e80a00
FS: 0000000000000000(0000)
GS:ffff925e47880000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff9258ea95baf0 CR3: 0000000166022004 CR4:
0000000000f72ef0
PKRU: 55555554
Call Trace:
<IRQ>
aq_ring_rx_clean+0x175/0xe60 [atlantic]
? aq_ring_rx_clean+0x14d/0xe60 [atlantic]
? aq_ring_tx_clean+0xdf/0x190 [atlantic]
? kmem_cache_free+0x348/0x450
? aq_vec_poll+0x81/0x1d0 [atlantic]
? __napi_poll+0x28/0x1c0
? net_rx_action+0x337/0x420
```
Fixes: 6aecbba12b ("net: atlantic: add check for MAX_SKB_FRAGS")
Changes in v4:
- Add Fixes: tag to satisfy patch validation requirements.
Changes in v3:
- Fix by assuming there will be an extra frag if buff->len > AQ_CFG_RX_HDR_SIZE,
then all fragments are accounted for.
Signed-off-by: Jiefeng Zhang <jiefeng.z.zhang@gmail.com>
Link: https://patch.msgid.link/20251126032249.69358-1-jiefeng.z.zhang@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Changes to virtio network stack should be cc'd to netdev DL, separate
it into its own group to add netdev in addition to virtualization DL.
Signed-off-by: Jon Kohler <jon@nutanix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20251126015750.2200267-1-jon@nutanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit a2fb4bc4e2 ("net: implement virtio helpers to handle UDP
GSO tunneling.") inadvertently altered checksum offload behavior
for guests not using UDP GSO tunneling.
Before, tun_put_user called tun_vnet_hdr_from_skb, which passed
has_data_valid = true to virtio_net_hdr_from_skb.
After, tun_put_user began calling tun_vnet_hdr_tnl_from_skb instead,
which passes has_data_valid = false into both call sites.
This caused virtio hdr flags to not include VIRTIO_NET_HDR_F_DATA_VALID
for SKBs where skb->ip_summed == CHECKSUM_UNNECESSARY. As a result,
guests are forced to recalculate checksums unnecessarily.
Restore the previous behavior by ensuring has_data_valid = true is
passed in the !tnl_gso_type case, but only from tun side, as
virtio_net_hdr_tnl_from_skb() is used also by the virtio_net driver,
which in turn must not use VIRTIO_NET_HDR_F_DATA_VALID on tx.
cc: stable@vger.kernel.org
Fixes: a2fb4bc4e2 ("net: implement virtio helpers to handle UDP GSO tunneling.")
Signed-off-by: Jon Kohler <jon@nutanix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Link: https://patch.msgid.link/20251125222754.1737443-1-jon@nutanix.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix a potential counter roll-over issue in fbnic_mbx_alloc_rx_msgs()
when calculating descriptor slots. The issue occurs when head - tail
results in a large positive value (unsigned) and the compiler interprets
head - tail - 1 as a signed value.
Since FBNIC_IPC_MBX_DESC_LEN is a power of two, use a masking operation,
which is a common way of avoiding this problem when dealing with these
sort of ring space calculations.
Fixes: da3cde0820 ("eth: fbnic: Add FW communication mechanism")
Signed-off-by: Mohsin Bashir <mohsin.bashr@gmail.com>
Link: https://patch.msgid.link/20251125211704.3222413-1-mohsin.bashr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When __mptcp_retrans() kicks-in, it schedules one or more subflows for
retransmission, but such subflows could be actually left alone if there
is no more data to retransmit and/or in case of concurrent fallback.
Scheduled subflows could be processed much later in time, i.e. when new
data will be transmitted, leading to bad subflow selection.
Explicitly clear all scheduled subflows before leaving the
retransmission function.
Fixes: ee2708aeda ("mptcp: use get_retrans wrapper")
Cc: stable@vger.kernel.org
Reported-by: Filip Pokryvka <fpokryvk@redhat.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20251125-net-mptcp-clear-sched-rtx-v1-1-1cea4ad2165f@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When using the SGMII PCS as a fixed-link chip-to-chip connection, it is
easy to miss the fact that traffic passes only at 1G, since that's what
any normal such connection would use.
When using the SGMII PCS connected towards an on-board PHY or an SFP
module, it is immediately noticeable that when the link resolves to a
speed other than 1G, traffic from the MAC fails to pass: TX counters
increase, but nothing gets decoded by the other end, and no local RX
counters increase either.
Artificially lowering a fixed-link rate to speed = <100> makes us able
to see the same issue as in the case of having an SGMII PHY.
Some debugging shows that the XPCS configuration is A-OK, but that the
MAC Configuration Table entry for the port has the SPEED bits still set
to 1000Mbps, due to a special condition in the driver. Deleting that
condition, and letting the resolved link speed be programmed directly
into the MAC speed field, results in a functional link at all 3 speeds.
This piece of evidence, based on testing on both generations with SGMII
support (SJA1105S and SJA1110A) directly contradicts the statement from
the blamed commit that "the MAC is fixed at 1 Gbps and we need to
configure the PCS only (if even that)". Worse, that statement is not
backed by any documentation, and no one from NXP knows what it might
refer to.
I am unable to recall sufficient context regarding my testing from March
2020 to understand what led me to draw such a braindead and factually
incorrect conclusion. Yet, there is nothing of value regarding forcing
the MAC speed, either for SGMII or 2500Base-X (introduced at a later
stage), so remove all such logic.
Fixes: ffe10e679c ("net: dsa: sja1105: Add support for the SGMII port")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20251122111324.136761-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Correct it since M.2 device T99W640 has updated from T99W515.
We need to align it with MHI side otherwise this modem can't
get the network.
Fixes: ae5a342643 ("bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
Reviewed-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
Link: https://patch.msgid.link/20251125070900.33324-1-slark_xiao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When discarding descriptors with IN_ORDER, we should rewind
next_avail_head otherwise it would run out of sync with
last_avail_idx. This would cause driver to report
"id X is not a head".
Fixing this by returning the number of descriptors that is used for
each buffer via vhost_get_vq_desc_n() so caller can use the value
while discarding descriptors.
Fixes: 67a873df0c ("vhost: basic in order support")
Cc: stable@vger.kernel.org
Signed-off-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://patch.msgid.link/20251120022950.10117-1-jasowang@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
