doctype annotations of static functions have little if any value.
Drop them to silence 0-day complaints.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504161919.duDL1s2X-lkp@intel.com/
Cc: Johannes Cornelis Draaijer <jcdra1@gmail.com>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The PCC driver now handles mapping and unmapping of shared memory
areas as part of pcc_mbox_{request,free}_channel(). Without these before,
this xgene hwmon driver did handling of those mappings like several
other PCC mailbox client drivers.
There were redundant operations, leading to unnecessary code. Maintaining
the consistency across these driver was harder due to scattered handling
of shmem.
Just use the mapped shmem and remove all redundant operations from this
driver.
Cc: Jean Delvare <jdelvare@suse.com>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-hwmon@vger.kernel.org
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20250411112053.1148624-1-sudeep.holla@arm.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The interrupt handler here just increments an atomic counter, jumping to
a threaded handler risks missing tachometer pulses and is likely to be
more expensive than the simple atomic increment.
Signed-off-by: John Keeping <jkeeping@inmusicbrands.com>
Link: https://lore.kernel.org/r/20250410180357.2258822-1-jkeeping@inmusicbrands.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The KEBA battery monitoring controller is found in the system FPGA of
KEBA PLC devices. It puts a load on the coin cell battery to check the
state of the battery. If the coin cell battery is nearly empty, then
the user space is signaled with a hwmon alarm.
The auxiliary device for this driver is instantiated by the cp500 misc
driver.
Signed-off-by: Gerhard Engleder <eg@keba.com>
Link: https://lore.kernel.org/r/20250409190830.60489-1-gerhard@engleder-embedded.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
FANs might be supplied by a regulator which needs to be enabled as well.
This is implemented using runtime PM. Every time speed_index changes from
0 to non-zero and vise versa RPM is resumed or suspended.
Intitial RPM state is determined by initial value of speed_index.
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250409065430.1413439-1-alexander.stein@ew.tq-group.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
According to the 'ti,ina2xx' binding, the 'vs-supply' property is
optional. Use devm_regulator_get_enable_optional() to avoid a kernel
warning message if the property is not provided.
Co-developed-by: Florin Buica <florin.buica@nxp.com>
Tested-by: Enric Balletbo i Serra <eballetbo@kernel.org>
Signed-off-by: Florin Buica <florin.buica@nxp.com>
Signed-off-by: Ciprian Marian Costea <ciprianmarian.costea@oss.nxp.com>
Link: https://lore.kernel.org/r/20250409074529.2233733-1-ciprianmarian.costea@oss.nxp.com
[groeck: Use standard multi-line comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The arrays have to be sorted by the sensor register bank and index
because this is what the sensor reading function expects. So sort them
and leave a comment for future contributors.
Signed-off-by: Eugene Shalygin <eugene.shalygin@gmail.com>
Link: https://lore.kernel.org/r/20250408204505.11412-1-eugene.shalygin@gmail.com
[groeck: Fixed alignment of new multi-line comment]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
When requesting new pages from the max34451 we sometimes see that the
firmware responds with stale or bad data to reads that happen
immediately after a page change. This is due to a lack of clock
stretching after page changing on the device side when it needs more
time to complete the operation.
To remedy this, the manufacturer recommends we wait 50us until
the firmware should be ready with the new page.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Link: https://lore.kernel.org/r/20250408011006.1314622-1-william@wkennington.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Currently, during startup, the fan is set to its maximum RPM by default,
which may not be suitable for all use cases.
This patch introduces support for specifying a target RPM via the Device
Tree property "target-rpm".
Changes:
- Added `target_rpm` field to `max6639_data` structure to store the
target RPM for each fan channel.
- Modified `max6639_probe_child_from_dt()` to read the `"target-rpm"`
property from the Device Tree and set `target_rpm` accordingly.
- Updated `max6639_init_client()` to use `target_rpm` to compute the
initial PWM duty cycle instead of defaulting to full speed (120/120).
Behavior:
- If `"target-rpm"` is specified, the fan speed is set accordingly.
- If `"target-rpm"` is not specified, the previous behavior (full speed
at startup) is retained.
This allows better control over fan speed during system initialization.
Signed-off-by: Naresh Solanki <naresh.solanki@9elements.com>
Link: https://lore.kernel.org/r/20250404115646.2000563-1-you@example.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Single-channel regulators do not need and should not have a "regulators"
node. We can not entirely remove it due to existing bindings. To solve the
problem for new drivers, provide additional macros PMBUS_REGULATOR_ONE_NODE
and PMBUS_REGULATOR_STEP_ONE_NODE and convert existing drivers to use those
macros. The exception is the ir38064 driver because its devicetree files
and its description do not require or use the nested regulators node.
Modify PMBUS_REGULATOR_STEP_ONE and PMBUS_REGULATOR_ONE to set the
regulators_node pointer to NULL.
Cc: Cedricjustine.Encarnacion@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250322142602.560042-1-linux@roeck-us.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
ADPM12160 is a quarter brick DC/DC Power Module. It is a high power
non-isolated converter capable of delivering a fully regulated 12V,
with continuous power level of 1600W with peak power at 2400W for
a limited time. Uses PMBus Configuration.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20250407-dev_adpm12160-v3-2-9cd3095445c8@analog.com
[groeck: The chip is "ADPM12160"]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The max344** family has an issue with some PMBUS address being switched.
This includes max34451 however version MAX34451-NA6 and later has this
issue fixed and this commit supports that update.
Signed-off-by: Alexis Czezar Torreno <alexisczezar.torreno@analog.com>
Link: https://lore.kernel.org/r/20250407-dev_adpm12160-v3-1-9cd3095445c8@analog.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-hwmon-v1-2-1fa38f34dc07@linaro.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20250407-gpiochip-set-rv-hwmon-v1-1-1fa38f34dc07@linaro.org
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
[groeck: Fixed multi-line alignment issue]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
We have some buggy pmbus devices that require a delay after performing a
page change operation before trying to issue more commands to the
device.
This allows for a configurable delay after page changes, but not
affecting other read or write operations.
This makes a slight behavioral tweak to the existing delay logic, where
it considers the longest of delays between operations, instead of always
chosing the write delay over the access delay.
Signed-off-by: William A. Kennington III <william@wkennington.com>
Link: https://lore.kernel.org/r/20250407201002.1198092-1-william@wkennington.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Add support to configure the PWM-Out pin polarity based on the device
tree. The binding would allow also to configure the PWM period, this is
currently not implemented by the driver.
The driver has a module option to set the PWM polarity (normal=0,
inverted=1), when specified it always takes the precedence over the DT.
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://lore.kernel.org/r/20250402102146.65406-3-francesco@dolcini.it
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The fwnode.h is not supposed to be used by the drivers as it
has the definitions for the core parts for different device
property provider implementations. Drop it.
Note, that fwnode API for drivers is provided in property.h
which is included here.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250331070600.3985850-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
There is a spelling mistake in a DRM_DEV_DEBUG_KMS message. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
static 'struct decon_data' is only read, so it can be const for code
safety.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
Corrected a spelling mistake in the exynos_drm_fimd driver to improve code
readability. No functional changes were made.
Signed-off-by: Anindya Sundar Gayen <anindya.sg@samsung.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
In the vidi_get_modes() function, if either drm_edid_dup() or
drm_edid_alloc() fails, the function will immediately return 0,
indicating that no display modes can be retrieved. However, in
the event of failure in these two functions, it is still necessary
to call the subsequent drm_edid_connector_update() function with
a NULL drm_edid as an argument. This ensures that operations such
as connector settings are performed in its callee function,
_drm_edid_connector_property_update. To maintain the integrity of
the operation, redundant error handling needs to be removed.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
It is not needed since drm_atomic_helper_shutdown checks it.
Signed-off-by: Guoqing Jiang <guoqing.jiang@canonical.com>
Signed-off-by: Inki Dae <inki.dae@samsung.com>
The init argument from mwifiex_sta_init_cmd() is no longer used. Drop
it.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20250423-mwifiex-drop-asynchronous-init-v2-4-1bb951073a06@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Historically all commands sent to the mwifiex driver have been
asynchronous. The different commands sent during driver initialization
have been queued at once and only the final command has been waited
for being ready before finally starting the driver.
This has been changed in Commit 7bff9c974e ("mwifiex: send firmware
initialization commands synchronously"). With this the initialization
is finished once the last mwifiex_send_cmd_sync() (now
mwifiex_send_cmd()) has returned. This makes all the code used to
wait for the last initialization command to be finished unnecessary,
so it's removed in this patch.
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20250423-mwifiex-drop-asynchronous-init-v2-3-1bb951073a06@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex_sta_init_cmd() returns -EINPROGRESS as success indication when
the init param is true. Likewise mwifiex_init_fw() returns -EINPROGRESS
as success indication: It will either return -EINPROGRESS directly when
in mfg_mode or the return value of mwifiex_sta_init_cmd() when in normal
mode.
-EINPROGRESS is a leftover from times when the initialization commands
were sent asynchronously. Since Commit 7bff9c974e ("mwifiex: send
firmware initialization commands synchronously") the return value has
become meaningless, so change mwifiex_sta_init_cmd() and
mwifiex_init_fw() to return 0 for success.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20250423-mwifiex-drop-asynchronous-init-v2-2-1bb951073a06@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since Commit 7bff9c974e ("mwifiex: send firmware initialization commands
synchronously") all initialization commands are sent synchronously which
means the command queue is empty when mwifiex_sta_init_cmd() returns. No
need to check for entries in the command code then, so remove the check.
Add a WARN_ON() just in case there is something wrong with the
reasoning.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Link: https://patch.msgid.link/20250423-mwifiex-drop-asynchronous-init-v2-1-1bb951073a06@pengutronix.de
[remove now unused is_cmd_pend_q_empty variable and comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This has nothing to do with the opmode. Set it in the transport layer
instead.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Tested-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://patch.msgid.link/20250423091408.4e288f7897be.I0c8f792ea2ed6967f8c6d8181f9c5f74bbec7d18@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If starting the op mode failed, the opmode memory is being freed,
so trans->op_mode needs to be NULLified. Otherwise, trans will access
already freed memory.
Call iwl_trans_op_mode_leave in that case.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.c7e178748ef7.Ifaf15bdd8ef8c59e04effbd2e7aa0034b30eeacb@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
From the moment that we have ALIVE, we can receive notification that
are handled asynchronously.
Some notifications (for example iwl_rfi_support_notif) requires an
operational FW. So we need to make sure that they were handled in
iwl_op_mode_mld_start before we stop the FW. Flush the async_handlers_wk
there to achieve that.
Also, if loading the FW in op mode start failed, we need to cancel
these notifications, as they are from a dead FW.
More than that, not doing so can cause us to access freed memory
if async_handlers_wk is executed after ieee80211_free_hw is called.
Fix this by canceling all async notifications if a failure occurred in
init (after ALIVE).
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.a8f63d983466.Ifd77d9c1a29fdd278b0a7bfc2709dd5d5e5efdb1@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
To cancel all async notifications, we need to:
- cancel async_handlers_wk
- empty async_handlers_list
Instead of having the callers to do both, do it in
iwl_mld_purge_async_handlers_list and rename it accordingly.
Note that the caller iwl_cleanup_mld didn't cancel the work, but it is
harmless.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.e98aed77e836.Id9f858d9d553d406a24165b09db830df111befce@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If iwl_mld_load_fw failed, we call iwl_mld_stop_fw which does, among the
others, iwl_trans_stop_device. But this is already called from
iwl_mld_load_fw's error path.
Since we do need the other stuff of iwl_mld_stop_fw to be done also in
the error path of iwl_mld_load_fw, just call it there.
This also makes the call to iwl_fw_flush_dumps in
iwl_mld_op_mope_start redundant, since it is the same as iwl_fw_dbg_stop_sync.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Daniel Gabay <daniel.gabay@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.f7d86be570d3.Ied68f0c4d126b3b0f1ffd9990bbc43d97f098e24@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
iwl_mld_run_fw_init_sequence used to be the last thing done in
iwl_mld_load_fw, and if it failed, it called iwl_trans_stop_hw.
Now we also have there iwl_mld_init_mcc, and it can fail.
In that case, we need to undo what we did so far, which is basically only
iwl_trans_stop_device. Do that.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.ba06d972a57b.I317fb7b10ed8a688a0d92c5d99de8765d8044b10@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
allocating mld->nvm_data used to be the last thing done in
iwl_mld_load_fw, so there was no need to free on any error path of
iwl_mld_load_fw.
But now iwl_mld_load_fw also calls iwl_mld_init_mcc, that can fail,
after allocating nvm->data. In that case, it is not freed.
As allocating the NVM data should only be done at op mode start anyway,
simply move it to there, where it is already freed in the right error
paths.
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Reviewed-by: Johannes Berg <johannes.berg@intel.com>
Link: https://patch.msgid.link/20250423091408.d07469f866ac.I84ad2e624ce7cd4a661c73b4942186e50cdf82b2@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
We never ask the firmware to store the beacon, so it won't ever send the
notification.
Remove the handling of that notification.
Remove that notification from the arrays of the notifications' names and
add the ones that we forgot to add.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.2bb3ea3ff79b.Ie8f1d89f59d45a960a5fe63e7b717527251350ad@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Since the FW is tracking the CT window by itself, we don't need
to update the MAC context or even fill in the value. We just had
added that because a firmware bug had broken it for a while.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.ee164b464c21.I29de491b4d74b2b8084e54bfbd28646b15dee196@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Configure 20 MHz AP mode based on NVM settings, set the
NL80211_RRF_ALLOW_20MHZ_ACTIVITY flag, when the NVM indicates
that an access point can operate in 20 MHz only.
Signed-off-by: Somashekhar Puttagangaiah <somashekhar.puttagangaiah@intel.com>
Signed-off-by: Pagadala Yesu Anjaneyulu <pagadala.yesu.anjaneyulu@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.897d826a8612.I1f7f84f4485ed3928070c97a031110ccb608bda8@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Earlier, the firmware could only request the reset handshake is
done during the dump, if the dump was split. However, it's also
needed when the dump isn't split, in which case it must be done
before the dump. The firmware now advertises this requirement,
so do the handshake in the non-split case when asked for.
Rename apply policy ..._RESET_HANDSHAKE to ..._SPLIT_DUMP_RESET
to more clearly indicate that this specific dump needs to be
split, while the handshake requirement overall is now indicated
by the new capability flag.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.10adafedb74b.Ie3911db1ebbd196ae4b0de1c53012aa1de193c0d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This state can never be entered, since the last place using it was
removed with non-DQA mode in commit c8f54701bd ("iwlwifi: mvm:
remove non-DQA mode"). Clean up this code too.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Miri Korenblit <miriam.rachel.korenblit@intel.com>
Link: https://patch.msgid.link/20250423091408.e8a20fb41dc5.I9cd41a15148c90e953335e7020405103ba3fc7f0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In brcmf_usb_dl_cmd(), the error logging is not enough to describe
the error state. And some caller of the brcmf_usb_dl_cmd() does not
handle its error. An error log in brcmf_usb_dl_cmd() is needed to
prevent silent failure.
Add error handling in brcmf_usb_dl_cmd() to log the command id and
error code in the brcmf_usb_dl_cmd() fails. In this way, every
invocation of the function logs a message upon failure.
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Link: https://patch.msgid.link/20250422065938.2345-1-vulab@iscas.ac.cn
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
An AP supporting Beacon Protection should set bit 84 in
the extended capabilities IE (9.4.2.25 in the 802.11be D7 spec).
So the *4th* bit of the 10th byte should be checked to figure out
whether beacon protection is enabled or disabled.
Signed-off-by: Karthikeyan Kathirvel <karthikeyan.kathirvel@oss.qualcomm.com>
Reviewed-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Link: https://patch.msgid.link/20250421111505.3633992-1-karthikeyan.kathirvel@oss.qualcomm.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d24 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping looks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
There are still a few users of %pK left, but these use it through seq_file,
for which its usage is safe.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250417-restricted-pointers-wifi-v1-1-b79cdaae5579@linutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In mwifiex_add_virtual_intf() several settings done in a switch/case
are the same in all cases. Move them out of the switch/case to
deduplicate the code.
bss_started is not initialized in all switch/case branches, but it is
only used in AP mode in the driver, so it doesn't hurt to move its
initialization out of the switch/case as well.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Reviewed-by: Francesco Dolcini <francesco@dolcini.it>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-9-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
mwifiex_is_tdls_off_chan() is only used locally. Make it static.
Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Acked-by: Brian Norris <briannorris@chromium.org>
Link: https://patch.msgid.link/20250410-mwifiex-cleanup-1-v6-8-a6bbd4ac4d37@pengutronix.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
