Prepare for an upcoming patch that modifies the RX buffer size in TSN mode.
Refactor IGC_RXPBSIZE_EXP_BMC_DEFAULT and IGC_RXPBS_CFG_TS_EN using
FIELD_PREP and GENMASK to improve clarity and maintainability. Refactor
both macros for consistency, even though the upcoming patch only use
IGC_RXPBSIZE_EXP_BMC_DEFAULT.
The newly introduced macros follow the naming from the i226 SW User Manual
for easy reference.
I've tested IGC_RXPBSIZE_EXP_BMC_DEFAULT and IGC_RXPBS_CFG_TS_EN before
and after the refactoring, and their values remain unchanged.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation for upcoming frame preemption patches, optimize the TX
packet buffer size. The total packet buffer size (RX + TX) is 64KB, with
a maximum of 34KB for either RX or TX. Split the buffer evenly,
allocating 32KB to each.
For TX, assign 7KB to each of the four TX packet buffers (total 28KB)
and reserve 4KB for BMC.
References:
I225/I226 SW User Manual Section 4.7.9, Section 8.3.2
Co-developed-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In preparation for an upcoming patch that will modify the TX buffer size
in TSN mode, replace IGC_TXPBSIZE_TSN and IGC_TXPBSIZE_DEFAULT
implementation with new macros that utilizes FIELD_PREP and GENMASK for
clarity.
The newly introduced macros follow the naming from the i226 SW User Manual
for easy reference.
I've tested IGC_TXPBSIZE_TSN and IGC_TXPBSIZE_DEFAULT before and after the
refactoring, and their values remain unchanged.
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Rename RX and TX packet buffer size macros in preparation for an
upcoming patch that will refactor buffer size handling using FIELD_PREP
and GENMASK.
Changes:
- Rename I225_RXPBSIZE_DEFAULT to IGC_RXPBSIZE_EXP_BMC_DEFAULT.
The EXP_BMC suffix explicitly indicates Express and BMC buffer
default values, improving readability and reusability for the
upcoming changes, while also better reflecting the current buffer
allocations.
- Rename I225_TXPBSIZE_DEFAULT to IGC_TXPBSIZE_DEFAULT.
These registers apply to both i225 and i226, so using the IGC prefix
aligns with existing macro naming conventions.
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Renamed xdp_get_tx_ring() function to a more generic name for use in
upcoming frame preemption patches.
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
When the link partner goes down, "ethtool --show-mm" still displays
"Verification status: SUCCEEDED," reflecting a previous state that is
no longer valid.
Reset the verification status to ensure it reflects the current state.
Reviewed-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
It appears that stmmac is not the only hardware which requires a
software-driven verification state machine for the MAC Merge layer.
While on the one hand it's good to encourage hardware implementations,
on the other hand it's quite difficult to tolerate multiple drivers
implementing independently fairly non-trivial logic.
Extract the hardware-independent logic from stmmac into library code and
put it in ethtool. Name the state structure "mmsv" for MAC Merge
Software Verification. Let this expose an operations structure for
executing the hardware stuff: sync hardware with the tx_active boolean
(result of verification process), enable/disable the pMAC, send mPackets,
notify library of external events (reception of mPackets), as well as
link state changes.
Note that it is assumed that the external events are received in hardirq
context. If they are not, it is probably a good idea to disable hardirqs
when calling ethtool_mmsv_event_handle(), because the library does not
do so.
Also, the MM software verification process has no business with the
tx_min_frag_size, that is all the driver's to handle.
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Co-developed-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Signed-off-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Tested-by: Choong Yong Liang <yong.liang.choong@linux.intel.com>
Tested-by: Furong Xu <0x1207@gmail.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The upcoming patch will extract verification logic into a new module,
MMSV (MAC Merge Software Verification). MMSV will handle most FPE fields,
except frag_size. It introduces its own lock (mmsv->lock), replacing
fpe_cfg->lock.
Since frag_size handling remains in the driver, the existing rtnl_lock()
is sufficient. Move frag_size handling out of spin_lock_irq_save() to keep
the upcoming patch a pure refactoring without behavior changes.
Signed-off-by: Faizal Rahim <faizal.abdul.rahim@linux.intel.com>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Furong Xu <0x1207@gmail.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Running the following commands was broken:
# cd /sys/kernel/tracing
# echo "filename.ustring ~ \"/proc*\"" > events/syscalls/sys_enter_openat/filter
# echo 1 > events/syscalls/sys_enter_openat/enable
# ls /proc/$$/maps
# cat trace
And would produce nothing when it should have produced something like:
ls-1192 [007] ..... 8169.828333: sys_openat(dfd: ffffffffffffff9c, filename: 7efc18359904, flags: 80000, mode: 0)
Add a test to check this case so that it will be caught if it breaks
again.
Link: https://lore.kernel.org/linux-trace-kernel/20250417183003.505835fb@gandalf.local.home/
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/20250418101208.38dc81f5@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The mode setting logic in ad7816_store_mode was reversed due to
incorrect handling of the strcmp return value. strcmp returns 0 on
match, so the `if (strcmp(buf, "full"))` block executed when the
input was not "full".
This resulted in "full" setting the mode to AD7816_PD (power-down) and
other inputs setting it to AD7816_FULL.
Fix this by checking it against 0 to correctly check for "full" and
"power-down", mapping them to AD7816_FULL and AD7816_PD respectively.
Fixes: 7924425db0 ("staging: iio: adc: new driver for AD7816 devices")
Cc: stable@vger.kernel.org
Signed-off-by: Gabriel Shahrouzi <gshahrouzi@gmail.com>
Acked-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/stable/20250414152920.467505-1-gshahrouzi%40gmail.com
Link: https://patch.msgid.link/20250414154050.469482-1-gshahrouzi@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On architectures where an s64 is only 32-bit aligned insufficient padding
would be left between the earlier elements and the timestamp. Use
aligned_s64 to enforce the correct placement and ensure the storage is
large enough.
Fixes: 54e018da31 ("iio:ad7266: Mark transfer buffer as __be16") # aligned_s64 is much newer.
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-2-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
On architectures where an s64 is not 64-bit aligned, this may result
insufficient alignment of the timestamp and the structure being too small.
Use aligned_s64 to force the alignment.
Fixes: a1caeebab0 ("iio: adc: ad7768-1: Fix too small buffer passed to iio_push_to_buffers_with_timestamp()") # aligned_s64 newer
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-3-jic23@kernel.org
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Here the lack of marking allows the overall structure to not be
sufficiently aligned resulting in misplacement of the timestamp
in iio_push_to_buffers_with_timestamp(). Use aligned_s64 to
force the alignment on all architectures.
Fixes: 7c0299e879 ("iio: adc: Add support for DLN2 ADC")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-4-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The IIO ABI requires 64-bit aligned timestamps. In this case insufficient
padding would have been added on architectures where an s64 is only 32-bit
aligned. Use aligned_s64 to enforce the correct alignment.
Fixes: 327a0eaf19 ("iio: accel: adxl355: Add triggered buffer support")
Reported-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-5-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The trick of using __aligned(IIO_DMA_MINALIGN) ensures that there is
no overlap between buffers used for DMA and those used for driver
state storage that are before the marking. It doesn't ensure
anything above state variables found after the marking. Hence
move this particular bit of state earlier in the structure.
Fixes: 10897f3430 ("iio: temp: maxim_thermocouple: Fix alignment for DMA safety")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250413103443.2420727-14-jic23@kernel.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Also move the unaligned.h header while touching this since it was the
only one not in alphabetical order.
Fixes: 13e945631c ("iio:chemical:pms7003: Fix timestamp alignment and prevent data leak.")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-4-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Follow the pattern of other drivers and use aligned_s64 for the
timestamp. This will ensure that the timestamp is correctly aligned on
all architectures.
Fixes: a5bf6fdd19 ("iio:chemical:sps30: Fix timestamp alignment")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sá <nuno.sa@analog.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-5-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Align the buffer used with iio_push_to_buffers_with_timestamp() to
ensure the s64 timestamp is aligned to 8 bytes.
Fixes: 0829edc43e ("iio: imu: inv_mpu6050: read the full fifo when processing data")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250417-iio-more-timestamp-alignment-v1-7-eafac1e22318@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A number of drivers are unable to release control due to hardware or
software limitations. As request_system_control was defined as void,
no error could be signalled.
This patch changes the prototype of request_system_control to int and
adds the appropriate checking and returns. In the case that a board
cannot release control EINVAL is returned. If a driver does not
implement request_system_control EPERM is returned.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250418133537.22491-1-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although the support of VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 was
signaled by the commit 664ed90e62 ("vhost/scsi: Set
VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits"),
vhost_scsi_send_bad_target() still assumes the response in a single
descriptor.
Similar issue in vhost_scsi_send_bad_target() has been fixed in previous
commit. In addition, similar issue for vhost_scsi_complete_cmd_work() has
been fixed by the commit 6dd88fd59d ("vhost-scsi: unbreak any layout for
response").
Fixes: 3ca51662f8 ("vhost-scsi: Add better resource allocation failure handling")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20250403063028.16045-4-dongli.zhang@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Although the support of VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 was
signaled by the commit 664ed90e62 ("vhost/scsi: Set
VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits"),
vhost_scsi_send_bad_target() still assumes the response in a single
descriptor.
In addition, although vhost_scsi_send_bad_target() is used by both I/O
queue and control queue, the response header is always
virtio_scsi_cmd_resp. It is required to use virtio_scsi_ctrl_tmf_resp or
virtio_scsi_ctrl_an_resp for control queue.
Fixes: 664ed90e62 ("vhost/scsi: Set VIRTIO_F_ANY_LAYOUT + VIRTIO_F_VERSION_1 feature bits")
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20250403063028.16045-3-dongli.zhang@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The vhost-scsi completion path may access vq->log_base when vq->log_used is
already set to false.
vhost-thread QEMU-thread
vhost_scsi_complete_cmd_work()
-> vhost_add_used()
-> vhost_add_used_n()
if (unlikely(vq->log_used))
QEMU disables vq->log_used
via VHOST_SET_VRING_ADDR.
mutex_lock(&vq->mutex);
vq->log_used = false now!
mutex_unlock(&vq->mutex);
QEMU gfree(vq->log_base)
log_used()
-> log_write(vq->log_base)
Assuming the VMM is QEMU. The vq->log_base is from QEMU userpace and can be
reclaimed via gfree(). As a result, this causes invalid memory writes to
QEMU userspace.
The control queue path has the same issue.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20250403063028.16045-2-dongli.zhang@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit cb380909ae ("vhost: return task creation error instead of NULL")
changed the return value of vhost_task_create(), but did not update the
documentation.
Reflect the change in the documentation: on an error, vhost_task_create()
returns an ERR_PTR() and no longer NULL.
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-Id: <20250327124435.142831-1-sgarzare@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
According to section 5.3.6.2 (Multiport Device Operation) of the virtio
spec(version 1.2) a control buffer with the event VIRTIO_CONSOLE_RESIZE
is followed by a virtio_console_resize struct containing cols then rows.
The kernel implements this the wrong way around (rows then cols) resulting
in the two values being swapped.
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Message-Id: <20250324144300.905535-1-maxbr@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As per virtio spec the fields cols and rows are specified as little
endian. Although there is no legacy interface requirement that would
state that cols and rows need to be handled as native endian when legacy
interface is used, unlike for the fields of the adjacent struct
virtio_console_control, I decided to err on the side of caution based
on some non-conclusive virtio spec repo archaeology and opt for using
virtio16_to_cpu() much like for virtio_console_control.event. Strictly
by the letter of the spec virtio_le_to_cpu() would have been sufficient.
But when the legacy interface is not used, it boils down to the same.
And when using the legacy interface, the device formatting these as
little endian when the guest is big endian would surprise me more than
it using guest native byte order (which would make it compatible with
the current implementation). Nevertheless somebody trying to implement
the spec following it to the letter could end up forcing little endian
byte order when the legacy interface is in use. So IMHO this ultimately
needs a judgement call by the maintainers.
Fixes: 8345adbf96 ("virtio: console: Accept console size along with resize control message")
Signed-off-by: Halil Pasic <pasic@linux.ibm.com>
Cc: stable@vger.kernel.org # v2.6.35+
Message-Id: <20250322002954.3129282-1-pasic@linux.ibm.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit df6f8c4d72 ("selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to
TEST_PROGS") added set_pcie_speed.sh into TEST_PROGS but that script is a
helper that is only being called by set_pcie_cooling_state.sh, not a test
case itself. When set_pcie_speed.sh is in TEST_PROGS, selftest harness will
execute also it leading to bwctrl selftest errors:
# selftests: pcie_bwctrl: set_pcie_speed.sh
# cat: /cur_state: No such file or directory
not ok 2 selftests: pcie_bwctrl: set_pcie_speed.sh # exit=1
Place set_pcie_speed.sh into TEST_FILES instead to have it included into
installed test files but not execute it from the test harness.
Fixes: df6f8c4d72 ("selftests/pcie_bwctrl: Add 'set_pcie_speed.sh' to TEST_PROGS")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250417124529.11391-1-ilpo.jarvinen@linux.intel.com
PCI resource fitting code in __assign_resources_sorted() runs in multiple
steps. A resource that was successfully assigned may have to be released
before the next step attempts assignment again. The assign+release cycle is
destructive to a start-aligned struct resource (bridge window or IOV
resource) because the start field is overwritten with the real address when
the resource got assigned.
One symptom:
pci 0002:00:00.0: bridge window [mem size 0x00100000]: can't assign; bogus alignment
Properly restore the resource after releasing it. The start, end, and flags
fields must be stored into the related struct pci_dev_resource in order to
be able to restore the resource to its original state.
Fixes: 96336ec702 ("PCI: Perform reset_resource() and build fail list in sync")
Reported-by: Guenter Roeck <linux@roeck-us.net>
Closes: https://lore.kernel.org/r/01eb7d40-f5b5-4ec5-b390-a5c042c30aff@roeck-us.net/
Reported-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Closes: https://lore.kernel.org/r/3578030.5fSG56mABF@workhorse
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Ondrej Jirman <megi@xff.cz>
Link: https://patch.msgid.link/20250403093137.1481-1-ilpo.jarvinen@linux.intel.com
As the function switch_mm_irqs_off() implies, it ought to be called with
IRQs *off*. Commit 58f8ffa917 ("x86/mm: Allow temporary MMs when IRQs
are on") caused this to not be the case for EFI.
Ensure IRQs are off where it matters.
Fixes: 58f8ffa917 ("x86/mm: Allow temporary MMs when IRQs are on")
Reported-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Rik van Riel <riel@surriel.com>
Link: https://lore.kernel.org/r/20250418095034.GR38216@noisy.programming.kicks-ass.net
Communicating with the hypervisor using the shared GHCB page requires
clearing the C bit in the mapping of that page. When executing in the
context of the EFI boot services, the page tables are owned by the
firmware, and this manipulation is not possible.
So switch to a different API for accepting memory in SEV-SNP guests, one
which is actually supported at the point during boot where the EFI stub
may need to accept memory, but the SEV-SNP init code has not executed
yet.
For simplicity, also switch the memory acceptance carried out by the
decompressor when not booting via EFI - this only involves the
allocation for the decompressed kernel, and is generally only called
after kexec, as normal boot will jump straight into the kernel from the
EFI stub.
Fixes: 6c32117963 ("x86/sev: Add SNP-specific unaccepted memory support")
Tested-by: Tom Lendacky <thomas.lendacky@amd.com>
Co-developed-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: <stable@vger.kernel.org>
Cc: Dionna Amalie Glaze <dionnaglaze@google.com>
Cc: Kevin Loughlin <kevinloughlin@google.com>
Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: linux-efi@vger.kernel.org
Link: https://lore.kernel.org/r/20250404082921.2767593-8-ardb+git@google.com # discussion thread #1
Link: https://lore.kernel.org/r/20250410132850.3708703-2-ardb+git@google.com # discussion thread #2
Link: https://lore.kernel.org/r/20250417202120.1002102-2-ardb+git@google.com # final submission
Erratum 1054 affects AMD Zen processors that are a part of Family 17h
Models 00-2Fh and the workaround is to not set HWCR[IRPerfEn]. However,
when X86_FEATURE_ZEN1 was introduced, the condition to detect unaffected
processors was incorrectly changed in a way that the IRPerfEn bit gets
set only for unaffected Zen 1 processors.
Ensure that HWCR[IRPerfEn] is set for all unaffected processors. This
includes a subset of Zen 1 (Family 17h Models 30h and above) and all
later processors. Also clear X86_FEATURE_IRPERF on affected processors
so that the IRPerfCount register is not used by other entities like the
MSR PMU driver.
Fixes: 232afb5578 ("x86/CPU/AMD: Add X86_FEATURE_ZEN1")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Borislav Petkov <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/caa057a9d6f8ad579e2f1abaa71efbd5bd4eaf6d.1744956467.git.sandipan.das@amd.com
There is a problem with page pools not dma-unmapping immediately when
the device is going down, and delaying it until the page pool is
destroyed, which is not allowed (see links). That just got fixed for
normal page pools, and we need to address memory providers as well.
Unmap pages in the memory provider uninstall callback, and protect it
with a new lock. There is also a gap between when a dma mapping is
created and the mp is installed, so if the device is killed in between,
io_uring would be holding on to dma mappings to a dead device with no
one to call ->uninstall. Move it to page pool init and rely on
->is_mapped to make sure it's only done once.
Link: https://lore.kernel.org/lkml/8067f204-1380-4d37-8ffd-007fc6f26738@kernel.org/T/
Link: https://lore.kernel.org/all/20250409-page-pool-track-dma-v9-0-6a9ef2e0cba8@redhat.com/
Fixes: 34a3e60821 ("io_uring/zcrx: implement zerocopy receive pp memory provider")
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/ef9b7db249b14f6e0b570a1bb77ff177389f881c.1744965853.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The sequence number is constrained to a range of [0, 4095], which
is a total of 4096 values. The bitmask operation using `& 0xfff` is
used to perform this wrap-around. While this is functionally correct,
it obscures the intended semantic of a 4096-based wrap.
Using a modulo operation `% 4096u` makes the wrap-around logic
explicit and easier to understand. It clearly signals that the
sequence number cycles through a range of 4096 values.
It also makes the code robust against potential changes of the 4096
upper limit, especially when it becomes a non power-of-2 value while
the AND(&) works solely for power-of-2 values.
The use of `% 4096u` also guarantees that the modulo operation is
performed with unsigned arithmetic, preventing potential issues with
the signed types.
Found by Coccinelle.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Abraham Samuel Adekunle <abrahamadekunle50@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/e8d515539ba560961003eae15d301d03e6cdd17d.1744966511.git.abrahamadekunle50@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The code contains no spaces around binary operators with long lines
which reduces readability thereby not adhering to Linux kernel coding
style.
Add white spaces around the binary operators and use line breaks to
increase readability and ensure adherence to Linux kernel coding
styles.
Suggested-by: Andy Shevchenko <andy@kernel.org>
Signed-off-by: Abraham Samuel Adekunle <abrahamadekunle50@gmail.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/r/3b9a0572ad56699b095642fc169c9603e08616e9.1744966511.git.abrahamadekunle50@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
User code includes gpib_user.h. Since this include has diverged
from the original by
- removing unused functions and defines
- changing camel-case identifiers
- removing typedefs
we need to change the name of the kernel include. This include
will be included in the userland gpib_user.h ensuring backward
compatibility for application programmes.
Rename the file and change the references to it.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250418093111.8820-3-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The error code and timeout code enums are not used by any
of the gpib kernel code. This patch removes them.
Signed-off-by: Dave Penkler <dpenkler@gmail.com>
Link: https://lore.kernel.org/r/20250418093111.8820-2-dpenkler@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Clean-up `else`-blocks in `hw_sm750_map` that occur after `if`-blocks that
terminate function execution.
Signed-off-by: Eric Florin <ericflorin.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250418035023.27067-1-ericflorin.kernel@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Chiachang Wang says:
====================
The current Security Association (SA) offload setting
cannot be modified without removing and re-adding the
SA with the new configuration. Although existing netlink
messages allow SA migration, the offload setting will
be removed after migration.
This patchset enhances SA migration to include updating
the offload setting. This is beneficial for devices that
support IPsec session management.
====================
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Unlike L3 and DF counters, UMC counters (PERF_CTRs) set the Overflow bit
(bit 48) and saturate on overflow. A subsequent pmu->read() of the event
reports an incorrect accumulated count as there is no difference between
the previous and the current values of the counter.
To avoid this, inspect the current counter value and proactively reset
the corresponding PERF_CTR register on every pmu->read(). Combined with
the periodic reads initiated by the hrtimer, the counters never get a
chance saturate but the resolution reduces to 47 bits.
Fixes: 25e5684782 ("perf/x86/amd/uncore: Add memory controller support")
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Song Liu <song@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/dee9c8af2c6d66814cf4c6224529c144c620cf2c.1744906694.git.sandipan.das@amd.com
Introduce a module parameter for configuring the hrtimer duration in
milliseconds. The default duration is 60000 milliseconds and the intent
is to allow users to customize it to suit jitter tolerances. It should
be noted that a longer duration will reduce jitter but affect accuracy
if the programmed events cause the counters to overflow multiple times
in a single interval.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/6cb0101da74955fa9c8361f168ffdf481ae8a200.1744906694.git.sandipan.das@amd.com
Uncore counters do not provide mechanisms like interrupts to report
overflows and the accumulated user-visible count is incorrect if there
is more than one overflow between two successive read requests for the
same event because the value of prev_count goes out-of-date for
calculating the correct delta.
To avoid this, start a hrtimer to periodically initiate a pmu->read() of
the active counters for keeping prev_count up-to-date. It should be
noted that the hrtimer duration should be lesser than the shortest time
it takes for a counter to overflow for this approach to be effective.
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/8ecf5fe20452da1cd19cf3ff4954d3e7c5137468.1744906694.git.sandipan.das@amd.com
hrtimer handlers can be deferred to softirq context and affect timely
detection of counter overflows. Hence switch to HRTIMER_MODE_HARD.
Disabling and re-enabling IRQs in the hrtimer handler is not required
as pmu->start() and pmu->stop() can no longer intervene while updating
event->hw.prev_count.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/0ad4698465077225769e8edd5b2c7e8f48f636d5.1744906694.git.sandipan.das@amd.com
Rename rep_nop() function to what it really does.
No functional change intended.
Suggested-by: David Laight <david.laight.linux@gmail.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250418080805.83679-1-ubizjak@gmail.com
Current minimum required version of binutils is 2.25,
which supports PAUSE instruction mnemonic.
Replace "REP; NOP" with this proper mnemonic.
No functional change intended.
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Link: https://lore.kernel.org/r/20250418080805.83679-2-ubizjak@gmail.com
Minimum version of binutils required to compile the kernel is 2.25.
This version correctly handles the "rep" prefixes, so it is possible
to remove the semicolon, which was used to support ancient versions
of GNU as.
Due to the semicolon, the compiler considers "rep; insn" (or its
alternate "rep\n\tinsn" form) as two separate instructions. Removing
the semicolon makes asm length calculations more accurate, consequently
making scheduling and inlining decisions of the compiler more accurate.
Removing the semicolon also enables assembler checks involving "rep"
prefixes. Trying to assemble e.g. "rep addl %eax, %ebx" results in:
Error: invalid instruction `add' after `rep'
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pavel Machek <pavel@kernel.org>
Cc: Rafael J. Wysocki <rafael@kernel.org>
Link: https://lore.kernel.org/r/20250418071437.4144391-2-ubizjak@gmail.com
Minimum version of binutils required to compile the kernel is 2.25.
This version correctly handles the "rep" prefixes, so it is possible
to remove the semicolon, which was used to support ancient versions
of GNU as.
Due to the semicolon, the compiler considers "rep; insn" (or its
alternate "rep\n\tinsn" form) as two separate instructions. Removing
the semicolon makes asm length calculations more accurate, consequently
making scheduling and inlining decisions of the compiler more accurate.
Removing the semicolon also enables assembler checks involving "rep"
prefixes. Trying to assemble e.g. "rep addl %eax, %ebx" results in:
Error: invalid instruction `add' after `rep'
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Juergen Gross <jgross@suse.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Martin Mares <mj@ucw.cz>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250418071437.4144391-1-ubizjak@gmail.com
Add a 5-byte NOP uprobe trigger benchmark (x86_64 specific) to measure
uprobes/uretprobes on top of NOP5 instructions.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Hao Luo <haoluo@google.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alan Maguire <alan.maguire@oracle.com>
Link: https://lore.kernel.org/r/20250414083647.1234007-2-jolsa@kernel.org
