Meghana Malladi says:
====================
Bug fixes from XDP and perout series
This patch series consists of bug fixes from the XDP series:
1. Fixes a kernel warning that occurs when bringing down the
network interface.
2. Resolves a potential NULL pointer dereference in the
emac_xmit_xdp_frame() function.
3. Resolves a potential NULL pointer dereference in the
icss_iep_perout_enable() function
v3: https://lore.kernel.org/all/20250328102403.2626974-1-m-malladi@ti.com/
====================
Link: https://patch.msgid.link/20250415090543.717991-1-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ICSS IEP driver tracks perout and pps enable state with flags.
Currently when disabling pps and perout signals during icss_iep_exit(),
results in NULL pointer dereference for perout.
To fix the null pointer dereference issue, the icss_iep_perout_enable_hw
function can be modified to directly clear the IEP CMP registers when
disabling PPS or PEROUT, without referencing the ptp_perout_request
structure, as its contents are irrelevant in this case.
Fixes: 9b11536124 ("net: ti: icssg-prueth: Fix clearing of IEP_CMP_CFG registers during iep_init")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/7b1c7c36-363a-4085-b26c-4f210bee1df6@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-4-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is an error check inside emac_xmit_xdp_frame() function which
is called when the driver wants to transmit XDP frame, to check if
the allocated tx descriptor is NULL, if true to exit and return
ICSSG_XDP_CONSUMED implying failure in transmission.
In this case trying to free a descriptor which is NULL will result
in kernel crash due to NULL pointer dereference. Fix this error handling
and increase netdev tx_dropped stats in the caller of this function
if the function returns ICSSG_XDP_CONSUMED.
Fixes: 62aa3246f4 ("net: ti: icssg-prueth: Add XDP support")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/all/70d8dd76-0c76-42fc-8611-9884937c82f5@stanley.mountain/
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-3-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
During network interface initialization, the NIC driver needs to register
its Rx queue with the XDP, to ensure the incoming XDP buffer carries a
pointer reference to this info and is stored inside xdp_rxq_info.
While this struct isn't tied to XDP prog, if there are any changes in
Rx queue, the NIC driver needs to stop the Rx queue by unregistering
with XDP before purging and reallocating memory. Drop page_pool destroy
during Rx channel reset as this is already handled by XDP during
xdp_rxq_info_unreg (Rx queue unregister), failing to do will cause the
following warning:
warning logs: https://gist.github.com/MeghanaMalladiTI/eb627e5dc8de24e42d7d46572c13e576
Fixes: 46eeb90f03 ("net: ti: icssg-prueth: Use page_pool API for RX buffer allocation")
Signed-off-by: Meghana Malladi <m-malladi@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250415090543.717991-2-m-malladi@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When building with CONFIG_LTO_CLANG, there is an error in the x86 boot
startup code because it builds with a different code model than the rest
of the kernel:
ld.lld: error: Function Import: link error: linking module flags 'Code Model': IDs have conflicting values: 'i32 2' from vmlinux.a(head64.o at 1302448), and 'i32 1' from vmlinux.a(map_kernel.o at 1314208)
ld.lld: error: Function Import: link error: linking module flags 'Code Model': IDs have conflicting values: 'i32 2' from vmlinux.a(common.o at 1306108), and 'i32 1' from vmlinux.a(gdt_idt.o at 1314148)
As this directory is for code that only runs during early system
initialization, LTO is not very important, so filter out the LTO flags
from KBUILD_CFLAGS for arch/x86/boot/startup to resolve the build error.
Fixes: 4cecebf200 ("x86/boot: Move the early GDT/IDT setup code into startup/")
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: llvm@lists.linux.dev
Link: https://lore.kernel.org/r/20250414-x86-boot-startup-lto-error-v1-1-7c8bed7c131c@kernel.org
Closes: https://lore.kernel.org/CA+G9fYvnun+bhYgtt425LWxzOmj+8Jf3ruKeYxQSx-F6U7aisg@mail.gmail.com/
{bdev,disk}_zone_capacity() takes block_device or gendisk and sector position
and returns the zone capacity of the corresponding zone.
With that, move disk_nr_zones() and blk_zone_plug_bio() to consolidate them in
the same #ifdef block.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The whole tree checker returns EUCLEAN, except the one check in
btrfs_verify_level_key(). This was inherited from the function that was
moved from disk-io.c in 2cac5af165 ("btrfs: move
btrfs_verify_level_key into tree-checker.c") but this should be unified
with the rest.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There was a bug report about a NULL pointer dereference in
__btrfs_add_free_space_zoned() that ultimately happens because a
conversion from the default metadata profile DUP to a RAID1 profile on two
disks.
The stack trace has the following signature:
BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile
BUG: kernel NULL pointer dereference, address: 0000000000000058
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:__btrfs_add_free_space_zoned.isra.0+0x61/0x1a0
RSP: 0018:ffffa236b6f3f6d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff96c8132f3400 RCX: 0000000000000001
RDX: 0000000010000000 RSI: 0000000000000000 RDI: ffff96c8132f3410
RBP: 0000000010000000 R08: 0000000000000003 R09: 0000000000000000
R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000
R13: ffff96c758f65a40 R14: 0000000000000001 R15: 000011aac0000000
FS: 00007fdab1cb2900(0000) GS:ffff96e60ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000058 CR3: 00000001a05ae000 CR4: 0000000000350ef0
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15c/0x2f0
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? __btrfs_add_free_space_zoned.isra.0+0x61/0x1a0
btrfs_add_free_space_async_trimmed+0x34/0x40
btrfs_add_new_free_space+0x107/0x120
btrfs_make_block_group+0x104/0x2b0
btrfs_create_chunk+0x977/0xf20
btrfs_chunk_alloc+0x174/0x510
? srso_return_thunk+0x5/0x5f
btrfs_inc_block_group_ro+0x1b1/0x230
btrfs_relocate_block_group+0x9e/0x410
btrfs_relocate_chunk+0x3f/0x130
btrfs_balance+0x8ac/0x12b0
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? __kmalloc_cache_noprof+0x14c/0x3e0
btrfs_ioctl+0x2686/0x2a80
? srso_return_thunk+0x5/0x5f
? ioctl_has_perm.constprop.0.isra.0+0xd2/0x120
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x82/0x160
? srso_return_thunk+0x5/0x5f
? __memcg_slab_free_hook+0x11a/0x170
? srso_return_thunk+0x5/0x5f
? kmem_cache_free+0x3f0/0x450
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? syscall_exit_to_user_mode+0x10/0x210
? srso_return_thunk+0x5/0x5f
? do_syscall_64+0x8e/0x160
? sysfs_emit+0xaf/0xc0
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? seq_read_iter+0x207/0x460
? srso_return_thunk+0x5/0x5f
? vfs_read+0x29c/0x370
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? syscall_exit_to_user_mode+0x10/0x210
? srso_return_thunk+0x5/0x5f
? do_syscall_64+0x8e/0x160
? srso_return_thunk+0x5/0x5f
? exc_page_fault+0x7e/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fdab1e0ca6d
RSP: 002b:00007ffeb2b60c80 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdab1e0ca6d
RDX: 00007ffeb2b60d80 RSI: 00000000c4009420 RDI: 0000000000000003
RBP: 00007ffeb2b60cd0 R08: 0000000000000000 R09: 0000000000000013
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffeb2b6343b R14: 00007ffeb2b60d80 R15: 0000000000000001
</TASK>
CR2: 0000000000000058
---[ end trace 0000000000000000 ]---
The 1st line is the most interesting here:
BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile
When a RAID1 block-group is created and a write pointer mismatch between
the disks in the RAID set is detected, btrfs sets the alloc_offset to the
length of the block group marking it as full. Afterwards the code expects
that a balance operation will evacuate the data in this block-group and
repair the problems.
But before this is possible, the new space of this block-group will be
accounted in the free space cache. But in __btrfs_add_free_space_zoned()
it is being checked if it is a initial creation of a block group and if
not a reclaim decision will be made. But the decision if a block-group's
free space accounting is done for an initial creation depends on if the
size of the added free space is the whole length of the block-group and
the allocation offset is 0.
But as btrfs_load_block_group_zone_info() sets the allocation offset to
the zone capacity (i.e. marking the block-group as full) this initial
decision is not met, and the space_info pointer in the 'struct
btrfs_block_group' has not yet been assigned.
Fail creation of the block group and rely on manual user intervention to
re-balance the filesystem.
Afterwards the filesystem can be unmounted, mounted in degraded mode and
the missing device can be removed after a full balance of the filesystem.
Reported-by: 西木野羰基 <yanqiyu01@gmail.com>
Link: https://lore.kernel.org/linux-btrfs/CAB_b4sBhDe3tscz=duVyhc9hNE+gu=B8CrgLO152uMyanR8BEA@mail.gmail.com/
Fixes: b1934cd606 ("btrfs: zoned: handle broken write pointer on zones")
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After enabling large data folios for tests, I hit the ASSERT() inside
GET_SUBPAGE_BITMAP() where blocks_per_folio matches BITS_PER_LONG.
The ASSERT() itself is only based on the original subpage fs block size,
where we have at most 16 blocks per page, thus
"ASSERT(blocks_per_folio < BITS_PER_LONG)".
However the experimental large data folio support will set the max folio
order according to the BITS_PER_LONG, so we can have a case where a large
folio contains exactly BITS_PER_LONG blocks.
So the ASSERT() is too strict, change it to
"ASSERT(blocks_per_folio <= BITS_PER_LONG)" to avoid the false alert.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running btrfs/004 with 4K fs block size and 64K page size,
sometimes fsstress workload can take 100% CPU for a while, but not long
enough to trigger a 120s hang warning.
[CAUSE]
When such 100% CPU usage happens, btrfs_punch_hole_lock_range() is
always in the call trace.
One example when this problem happens, the function
btrfs_punch_hole_lock_range() got the following parameters:
lock_start = 4096, lockend = 20469
Then we calculate @page_lockstart by rounding up lock_start to page
boundary, which is 64K (page size is 64K).
For @page_lockend, we round down the value towards page boundary, which
result 0. Then since we need to pass an inclusive end to
filemap_range_has_page(), we subtract 1 from the rounded down value,
resulting in (u64)-1.
In the above case, the range is inside the same page, and we do not even
need to call filemap_range_has_page(), not to mention to call it with
(u64)-1 at the end.
This behavior will cause btrfs_punch_hole_lock_range() to busy loop
waiting for irrelevant range to have its pages dropped.
[FIX]
Calculate @page_lockend by just rounding down @lockend, without
decreasing the value by one. So @page_lockend will no longer overflow.
Then exit early if @page_lockend is no larger than @page_lockstart.
As it means either the range is inside the same page, or the two pages
are adjacent already.
Finally only decrease @page_lockend when calling filemap_range_has_page().
Fixes: 0528476b6a ("btrfs: fix the filemap_range_has_page() call in btrfs_punch_hole_lock_range()")
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Inside the macro, subpage_calc_start_bit(), we need to calculate the
offset to the beginning of the folio.
But we're using offset_in_page(), on systems with 4K page size and 4K fs
block size, this means we will always return offset 0 for a large folio,
causing all kinds of errors.
Fix it by using offset_in_folio() instead.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
RZ/G2L General PWM Timer (GPT) composed of 8 channels with 32-bit timer
(GPT32E). It supports the following functions
* 32 bits x 8 channels
* Up-counting or down-counting (saw waves) or up/down-counting
(triangle waves) for each counter.
* Clock sources independently selectable for each channel
* Two I/O pins per channel
* Two output compare/input capture registers per channel
* For the two output compare/input capture registers of each channel,
four registers are provided as buffer registers and are capable of
operating as comparison registers when buffering is not in use.
* In output compare operation, buffer switching can be at crests or
troughs, enabling the generation of laterally asymmetric PWM waveforms.
* Registers for setting up frame cycles in each channel (with capability
for generating interrupts at overflow or underflow)
* Generation of dead times in PWM operation
* Synchronous starting, stopping and clearing counters for arbitrary
channels
* Starting, stopping, clearing and up/down counters in response to input
level comparison
* Starting, clearing, stopping and up/down counters in response to a
maximum of four external triggers
* Output pin disable function by dead time error and detected
short-circuits between output pins
* A/D converter start triggers can be generated (GPT32E0 to GPT32E3)
* Enables the noise filter for input capture and external trigger
operation
Add basic pwm support for RZ/G2L GPT driver by creating separate
logical channels for each IOs.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250226144531.176819-4-biju.das.jz@bp.renesas.com
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Better explain how pwm_round_waveform_might_sleep() (and so the
respective lowlevel driver callback) is supposed to round and the
meaning of the return value.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/db84abf1e82e4498fc0e7c318d2673771d0039fe.1744120697.git.ukleinek@kernel.org
[ukleinek: Fix a rst formatting issue reported by Stephen Rothwell]
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
There is a copy and paste bug so we accidentally returned
PTR_ERR(ddata->clk) instead of "ret".
Fixes: 2b62c89448 ("pwm: Add Loongson PWM controller support")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Binbin Zhou <zhoubinbin@loongson.cn>
Link: https://lore.kernel.org/r/6965a480-745c-426f-b17b-e96af532578f@stanley.mountain
Signed-off-by: Uwe Kleine-König <ukleinek@kernel.org>
Several issues with this change:
* The analysis is flawed and it's unclear what problem is being
fixed. There is no difference between wait_event_freezable_timeout()
and wait_event_timeout() with respect to device interrupts. And of
course "the interrupt notifying the finish of an operation happens
during wait_event_freezable_timeout()" -- that's how it's supposed
to work.
* The link at the "Closes:" tag appears to be an unrelated
use-after-free in idxd.
* It introduces a regression: dmatest threads are meant to be
freezable and this change breaks that.
See discussion here:
https://lore.kernel.org/dmaengine/878qpa13fe.fsf@AUSNATLYNCH.amd.com/
Fixes: e87ca16e99 ("dmaengine: dmatest: Fix dmatest waiting less when interrupted")
Signed-off-by: Nathan Lynch <nathan.lynch@amd.com>
Link: https://lore.kernel.org/r/20250403-dmaengine-dmatest-revert-waiting-less-v1-1-8227c5a3d7c8@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
If USB3.x device references USB4 host interface, USB4 port can be
connected with appropriate Type-C port. By using component framework,
and in turn by creating symlinks, userspace can benefit from having
Thunderbolt/USB4 connection to Type-C ports.
Note: This change introduces dependency on Thunderbolt driver as it's
required to properly map USB4 port to Type-C port.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
This function checks whether given USB4 port device matches with USB3.x
port device, using ACPI _DSD property.
It is designed to be used by component framework to match
USB4 ports with Type-C ports they are connected to.
Also, added USB4 config stub in case mapping function is not reachable.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Make usb4_port_index() available to other files in the driver, rename
and add function documentation.
Signed-off-by: Alan Borzeszkowski <alan.borzeszkowski@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cleans up the comments in both the c and the h file.
Standardises the comment type (/* */) and the indentation.
Signed-off-by: Ruben Wauters <rubenru09@aol.com>
Link: https://lore.kernel.org/r/20250415151246.30337-1-rubenru09@aol.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The blamed commit exposes a possible issue with flow_offload_teardown():
We might remove the offload bit of a conntrack entry that has been
offloaded again.
1. conntrack entry c1 is offloaded via flow f1 (f1->ct == c1).
2. f1 times out and is pushed back to slowpath, c1 offload bit is
removed. Due to bug, f1 is not unlinked from rhashtable right away.
3. a new packet arrives for the flow and re-offload is triggered, i.e.
f2->ct == c1. This is because lookup in flowtable skip entries with
teardown bit set.
4. Next flowtable gc cycle finds f1 again
5. flow_offload_teardown() is called again for f1 and c1 offload bit is
removed again, even though we have f2 referencing the same entry.
This is harmless, but clearly not correct.
Fix the bug that exposes this: set 'teardown = true' to have the gc
callback unlink the flowtable entry from the table right away instead of
the unintentional defer to the next round.
Also prevent flow_offload_teardown() from fixing up the ct state more than
once: We could also be called from the data path or a notifier, not only
from the flowtable gc callback.
NF_FLOW_TEARDOWN can never be unset, so we can use it as synchronization
point: if we observe did not see a 0 -> 1 transition, then another CPU
is already doing the ct state fixups for us.
Fixes: 03428ca5ce ("netfilter: conntrack: rework offload nf_conn timeout extension logic")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Resolved duplicate entry for IbaSPollBit vs IbaSpollBit.
Correct CamelCase for IBA enums
Adhere to Linux kernel coding style.
Reported by checkpatch
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250416203259.7862-2-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Removing gpib_interface_t to adhere to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-19-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-18-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-17-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-16-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-15-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-14-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-13-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-12-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-11-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-10-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-9-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-8-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-7-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-6-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-5-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-4-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Using Linux code style for struct gpib_interface.
Adhering to Linux code style.
Reported by checkpatch.pl
In general, a pointer, or a struct that has elements that can reasonably be
directly accessed should never be a typedef.
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-3-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
"Having the word "_struct" in the name of the struct doesn't add any
information so rename "struct gpib_interface_struct" to
"struct gpib_interface".
Signed-off-by: Michael Rubin <matchstick@neverthere.org>
Link: https://lore.kernel.org/r/20250417003246.84445-2-matchstick@neverthere.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
