This reverts commit 479380efe1.
The reset_method attribute on a PCI device is only intended to manage the
availability of function scoped resets for a device. It was never intended
to restrict resets targeting the bus or slot.
In introducing a restriction that each device must support function level
reset by testing pci_reset_supported(), we essentially create a catch-22,
that a device must have a function scope reset in order to support bus/slot
reset, when we use bus/slot reset to effect a reset of a device that does
not support a function scoped reset, especially multi-function devices.
This breaks the majority of uses cases where vfio-pci uses bus/slot resets
to manage multifunction devices that do not support function scoped resets.
Fixes: 479380efe1 ("PCI: Avoid reset when disabled via sysfs")
Reported-by: Cal Peake <cp@absolutedigital.net>
Closes: https://lore.kernel.org/all/808e1111-27b7-f35b-6d5c-5b275e73677b@absolutedigital.net
Reported-by: Athul Krishna <athul.krishna.kr@protonmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=220010
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250414211828.3530741-1-alex.williamson@redhat.com
As shown in [1], it is possible to corrupt a BPF ELF file such that
arbitrary BPF instructions are loaded by libbpf. This can be done by
setting a symbol (BPF program) section offset to a large (unsigned)
number such that <section start + symbol offset> overflows and points
before the section data in the memory.
Consider the situation below where:
- prog_start = sec_start + symbol_offset <-- size_t overflow here
- prog_end = prog_start + prog_size
prog_start sec_start prog_end sec_end
| | | |
v v v v
.....................|################################|............
The report in [1] also provides a corrupted BPF ELF which can be used as
a reproducer:
$ readelf -S crash
Section Headers:
[Nr] Name Type Address Offset
Size EntSize Flags Link Info Align
...
[ 2] uretprobe.mu[...] PROGBITS 0000000000000000 00000040
0000000000000068 0000000000000000 AX 0 0 8
$ readelf -s crash
Symbol table '.symtab' contains 8 entries:
Num: Value Size Type Bind Vis Ndx Name
...
6: ffffffffffffffb8 104 FUNC GLOBAL DEFAULT 2 handle_tp
Here, the handle_tp prog has section offset ffffffffffffffb8, i.e. will
point before the actual memory where section 2 is allocated.
This is also reported by AddressSanitizer:
=================================================================
==1232==ERROR: AddressSanitizer: heap-buffer-overflow on address 0x7c7302fe0000 at pc 0x7fc3046e4b77 bp 0x7ffe64677cd0 sp 0x7ffe64677490
READ of size 104 at 0x7c7302fe0000 thread T0
#0 0x7fc3046e4b76 in memcpy (/lib64/libasan.so.8+0xe4b76)
#1 0x00000040df3e in bpf_object__init_prog /src/libbpf/src/libbpf.c:856
#2 0x00000040df3e in bpf_object__add_programs /src/libbpf/src/libbpf.c:928
#3 0x00000040df3e in bpf_object__elf_collect /src/libbpf/src/libbpf.c:3930
#4 0x00000040df3e in bpf_object_open /src/libbpf/src/libbpf.c:8067
#5 0x00000040f176 in bpf_object__open_file /src/libbpf/src/libbpf.c:8090
#6 0x000000400c16 in main /poc/poc.c:8
#7 0x7fc3043d25b4 in __libc_start_call_main (/lib64/libc.so.6+0x35b4)
#8 0x7fc3043d2667 in __libc_start_main@@GLIBC_2.34 (/lib64/libc.so.6+0x3667)
#9 0x000000400b34 in _start (/poc/poc+0x400b34)
0x7c7302fe0000 is located 64 bytes before 104-byte region [0x7c7302fe0040,0x7c7302fe00a8)
allocated by thread T0 here:
#0 0x7fc3046e716b in malloc (/lib64/libasan.so.8+0xe716b)
#1 0x7fc3045ee600 in __libelf_set_rawdata_wrlock (/lib64/libelf.so.1+0xb600)
#2 0x7fc3045ef018 in __elf_getdata_rdlock (/lib64/libelf.so.1+0xc018)
#3 0x00000040642f in elf_sec_data /src/libbpf/src/libbpf.c:3740
The problem here is that currently, libbpf only checks that the program
end is within the section bounds. There used to be a check
`while (sec_off < sec_sz)` in bpf_object__add_programs, however, it was
removed by commit 6245947c1b ("libbpf: Allow gaps in BPF program
sections to support overriden weak functions").
Add a check for detecting the overflow of `sec_off + prog_sz` to
bpf_object__init_prog to fix this issue.
[1] https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Fixes: 6245947c1b ("libbpf: Allow gaps in BPF program sections to support overriden weak functions")
Reported-by: lmarch2 <2524158037@qq.com>
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Shung-Hsi Yu <shung-hsi.yu@suse.com>
Link: https://github.com/lmarch2/poc/blob/main/libbpf/libbpf.md
Link: https://lore.kernel.org/bpf/20250415155014.397603-1-vmalik@redhat.com
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-6-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-5-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-4-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-2-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
struct gpio_chip now has callbacks for setting line values that return
an integer, allowing to indicate failures. Convert the driver to using
them.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@tuxon.dev>
Link: https://lore.kernel.org/20250408-gpiochip-set-rv-pinctrl-part1-v1-1-c9d521d7c8c7@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Add dma_alloc_attrs() and dma_free_attrs() helpers to fix a build
error when CONFIG_HAS_DMA is not enabled.
Note that when CONFIG_HAS_DMA is enabled, dma_alloc_attrs() and
dma_free_attrs() are included in both bindings_generated.rs and
bindings_helpers_generated.rs. The former takes precedence so behavior
remains unchanged in that case.
This fixes the following build error on UML:
error[E0425]: cannot find function `dma_alloc_attrs` in crate `bindings`
--> rust/kernel/dma.rs:171:23
|
171 | bindings::dma_alloc_attrs(
| ^^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_alloc_pages`
|
::: rust/bindings/bindings_generated.rs:44568:5
|
44568 | / pub fn dma_alloc_pages(
44569 | | dev: *mut device,
44570 | | size: usize,
44571 | | dma_handle: *mut dma_addr_t,
44572 | | dir: dma_data_direction,
44573 | | gfp: gfp_t,
44574 | | ) -> *mut page;
| |___________________- similarly named function `dma_alloc_pages` defined here
error[E0425]: cannot find function `dma_free_attrs` in crate `bindings`
--> rust/kernel/dma.rs:293:23
|
293 | bindings::dma_free_attrs(
| ^^^^^^^^^^^^^^ help: a function with a similar name exists: `dma_free_pages`
|
::: rust/bindings/bindings_generated.rs:44577:5
|
44577 | / pub fn dma_free_pages(
44578 | | dev: *mut device,
44579 | | size: usize,
44580 | | page: *mut page,
44581 | | dma_handle: dma_addr_t,
44582 | | dir: dma_data_direction,
44583 | | );
| |______- similarly named function `dma_free_pages` defined here
Fixes: ad2907b4e3 ("rust: add dma coherent allocator abstraction")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Acked-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/r/20250412000507.157000-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When a Secondary Bus Reset is issued at a hotplug port, it causes a Data
Link Layer State Changed event as a side effect. On hotplug ports using
in-band presence detect, it additionally causes a Presence Detect Changed
event.
These spurious events should not result in teardown and re-enumeration of
the device in the slot. Hence commit 2e35afaefe ("PCI: pciehp: Add
reset_slot() method") masked the Presence Detect Changed Enable bit in the
Slot Control register during a Secondary Bus Reset. Commit 06a8d89af5
("PCI: pciehp: Disable link notification across slot reset") additionally
masked the Data Link Layer State Changed Enable bit.
However masking those bits only disables interrupt generation (PCIe r6.2
sec 6.7.3.1). The events are still visible in the Slot Status register
and picked up by the IRQ handler if it runs during a Secondary Bus Reset.
This can happen if the interrupt is shared or if an unmasked hotplug event
occurs, e.g. Attention Button Pressed or Power Fault Detected.
The likelihood of this happening used to be small, so it wasn't much of a
problem in practice. That has changed with the recent introduction of
bandwidth control in v6.13-rc1 with commit 665745f274 ("PCI/bwctrl:
Re-add BW notification portdrv as PCIe BW controller"):
Bandwidth control shares the interrupt with PCIe hotplug. A Secondary Bus
Reset causes a Link Bandwidth Notification, so the hotplug IRQ handler
runs, picks up the masked events and tears down the device in the slot.
As a result, Joel reports VFIO passthrough failure of a GPU, which Ilpo
root-caused to the incorrect handling of masked hotplug events.
Clearly, a more reliable way is needed to ignore spurious hotplug events.
For Downstream Port Containment, a new ignore mechanism was introduced by
commit a97396c6eb ("PCI: pciehp: Ignore Link Down/Up caused by DPC").
It has been working reliably for the past four years.
Adapt it for Secondary Bus Resets.
Introduce two helpers to annotate code sections which cause spurious link
changes: pci_hp_ignore_link_change() and pci_hp_unignore_link_change()
Use those helpers in lieu of masking interrupts in the Slot Control
register.
Introduce a helper to check whether such a code section is executing
concurrently and if so, await it: pci_hp_spurious_link_change()
Invoke the helper in the hotplug IRQ thread pciehp_ist(). Re-use the
IRQ thread's existing code which ignores DPC-induced link changes unless
the link is unexpectedly down after reset recovery or the device was
replaced during the bus reset.
That code block in pciehp_ist() was previously only executed if a Data
Link Layer State Changed event has occurred. Additionally execute it for
Presence Detect Changed events. That's necessary for compatibility with
PCIe r1.0 hotplug ports because Data Link Layer State Changed didn't exist
before PCIe r1.1. DPC was added with PCIe r3.1 and thus DPC-capable
hotplug ports always support Data Link Layer State Changed events.
But the same cannot be assumed for Secondary Bus Reset, which already
existed in PCIe r1.0.
Secondary Bus Reset is only one of many causes of spurious link changes.
Others include runtime suspend to D3cold, firmware updates or FPGA
reconfiguration. The new pci_hp_{,un}ignore_link_change() helpers may be
used by all kinds of drivers to annotate such code sections, hence their
declarations are publicly visible in <linux/pci.h>. A case in point is
the Mellanox Ethernet driver which disables a firmware reset feature if
the Ethernet card is attached to a hotplug port, see commit 3d7a3f2612
("net/mlx5: Nack sync reset request when HotPlug is enabled"). Going
forward, PCIe hotplug will be able to cope gracefully with all such use
cases once the code sections are properly annotated.
The new helpers internally use two bits in struct pci_dev's priv_flags as
well as a wait_queue. This mirrors what was done for DPC by commit
a97396c6eb ("PCI: pciehp: Ignore Link Down/Up caused by DPC"). That may
be insufficient if spurious link changes are caused by multiple sources
simultaneously. An example might be a Secondary Bus Reset issued by AER
during FPGA reconfiguration. If this turns out to happen in real life,
support for it can easily be added by replacing the PCI_LINK_CHANGING flag
with an atomic_t counter incremented by pci_hp_ignore_link_change() and
decremented by pci_hp_unignore_link_change(). Instead of awaiting a zero
PCI_LINK_CHANGING flag, the pci_hp_spurious_link_change() helper would
then simply await a zero counter.
Fixes: 665745f274 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller")
Reported-by: Joel Mathew Thomas <proxy0@tutamail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219765
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Tested-by: Joel Mathew Thomas <proxy0@tutamail.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/d04deaf49d634a2edf42bf3c06ed81b4ca54d17b.1744298239.git.lukas@wunner.de
Remove the `volatile` qualifier used with __iomem in helper functions
in io.c. These helper functions are just wrappers around the
corresponding accessors so they are unnecessary.
This fixes the following UML build error with CONFIG_RUST enabled:
In file included from rust/helpers/helpers.c:19:
rust/helpers/io.c:12:10: error: passing 'volatile void *' to parameter of type 'void *' discards qualifiers [-Werror,-Wincompatible-pointer-types-discards-qualifiers]
12 | iounmap(addr);
| ^~~~
arch/um/include/asm/io.h:19:42: note: passing argument to parameter 'addr' here
19 | static inline void iounmap(void __iomem *addr)
| ^
1 error generated.
[ Arnd explains [1] that removing the qualifier is the way forward
(thanks!):
Rihgt, I tried this last week when it came up first, removing the
'volatile' annotations in the asm-generic/io.h header and then
all the ones that caused build regressions on arm/arm64/x86
randconfig and allmodconfig builds. This patch is a little
longer than my original version as I did run into a few
regressions later.
As far as I can tell, none of these volatile annotations have
any actual effect, and most of them date back to ancient kernels
where this may have been required.
Leaving it out of the rust interface is clearly the right way,
and it shouldn't be too hard to upstream the changes below
when we need to, but I also don't see any priority to send these.
If anyone wants to help out, I can send them the whole patch.
I created an issue [2] in case someone wants to help. - Miguel ]
Fixes: ce30d94e68 ("rust: add `io::{Io, IoRaw}` base types")
Signed-off-by: FUJITA Tomonori <fujita.tomonori@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Danilo Krummrich <dakr@kernel.org>
Link: https://lore.kernel.org/rust-for-linux/0c844b70-19c7-4b14-ba29-fc99ae0d69f0@app.fastmail.com/ [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1156 [2]
Link: https://lore.kernel.org/r/20250412005341.157150-1-fujita.tomonori@gmail.com
[ Reworded for relative paths. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Commit a97396c6eb ("PCI: pciehp: Ignore Link Down/Up caused by DPC")
amended PCIe hotplug to not bring down the slot upon Data Link Layer State
Changed events caused by Downstream Port Containment.
However Keith reports off-list that if the slot uses in-band presence
detect (i.e. Presence Detect State is derived from Data Link Layer Link
Active), DPC also causes a spurious Presence Detect Changed event.
This needs to be ignored as well.
Unfortunately there's no register indicating that in-band presence detect
is used. PCIe r5.0 sec 7.5.3.10 introduced the In-Band PD Disable bit in
the Slot Control Register. The PCIe hotplug driver sets this bit on
ports supporting it. But older ports may still use in-band presence
detect.
If in-band presence detect can be disabled, Presence Detect Changed events
occurring during DPC must not be ignored because they signal device
replacement. On all other ports, device replacement cannot be detected
reliably because the Presence Detect Changed event could be a side effect
of DPC. On those (older) ports, perform a best-effort device replacement
check by comparing the Vendor ID, Device ID and other data in Config Space
with the values cached in struct pci_dev. Use the existing helper
pciehp_device_replaced() to accomplish this. It is currently #ifdef'ed to
CONFIG_PM_SLEEP in pciehp_core.c, so move it to pciehp_hpc.c where most
other functions accessing config space reside.
Reported-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://patch.msgid.link/fa264ff71952915c4e35a53c89eb0cde8455a5c5.1744298239.git.lukas@wunner.de
Enabling a (modular) test should not silently enable additional kernel
functionality, as that may increase the attack vector of a product.
Fix this by making PRIME_NUMBERS_KUNIT_TEST depend on PRIME_NUMBERS
instead of selecting it.
After this, one can safely enable CONFIG_KUNIT_ALL_TESTS=m to build
modules for all appropriate tests for ones system, without pulling in
extra unwanted functionality, while still allowing a tester to manually
enable PRIME_NUMBERS and this test suite on a system where PRIME_NUMBERS
is not enabled by default. Resurrect CONFIG_PRIME_NUMBERS=m in
tools/testing/selftests/lib/config for the latter use case.
Fixes: 313b38a6ec ("lib/prime_numbers: convert self-test to KUnit")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Tamir Duberstein <tamird@gmail.com>
Link: https://lore.kernel.org/r/40f8a40eef4930d3ac9febd205bc171eb04e171c.1744641237.git.geert@linux-m68k.org
Signed-off-by: Kees Cook <kees@kernel.org>
Running lib_ubsan.ko on arm64 (without CONFIG_UBSAN_TRAP) panics the
kernel:
[ 31.616546] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: test_ubsan_out_of_bounds+0x158/0x158 [test_ubsan]
[ 31.646817] CPU: 3 UID: 0 PID: 179 Comm: insmod Not tainted 6.15.0-rc2 #1 PREEMPT
[ 31.648153] Hardware name: linux,dummy-virt (DT)
[ 31.648970] Call trace:
[ 31.649345] show_stack+0x18/0x24 (C)
[ 31.650960] dump_stack_lvl+0x40/0x84
[ 31.651559] dump_stack+0x18/0x24
[ 31.652264] panic+0x138/0x3b4
[ 31.652812] __ktime_get_real_seconds+0x0/0x10
[ 31.653540] test_ubsan_load_invalid_value+0x0/0xa8 [test_ubsan]
[ 31.654388] init_module+0x24/0xff4 [test_ubsan]
[ 31.655077] do_one_initcall+0xd4/0x280
[ 31.655680] do_init_module+0x58/0x2b4
That happens because the test corrupts other data in the stack:
400: d5384108 mrs x8, sp_el0
404: f9426d08 ldr x8, [x8, #1240]
408: f85f83a9 ldur x9, [x29, #-8]
40c: eb09011f cmp x8, x9
410: 54000301 b.ne 470 <test_ubsan_out_of_bounds+0x154> // b.any
As there is no guarantee the compiler will order the local variables
as declared in the module:
volatile char above[4] = { }; /* Protect surrounding memory. */
volatile int arr[4];
volatile char below[4] = { }; /* Protect surrounding memory. */
There is another problem where the out-of-bound index is 5 which is larger
than the extra surrounding memory for protection.
So, use a struct to enforce the ordering, and fix the index to be 4.
Also, remove some of the volatiles and rely on OPTIMIZER_HIDE_VAR()
Signed-off-by: Mostafa Saleh <smostafa@google.com>
Link: https://lore.kernel.org/r/20250415203354.4109415-1-smostafa@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
CONFIG_UBSAN_INTEGER_WRAP is 'default UBSAN', which is problematic for a
couple of reasons.
The first is that this sanitizer is under active development on the
compiler side to come up with a solution that is maintainable on the
compiler side and usable on the kernel side. As a result of this, there
are many warnings when the sanitizer is enabled that have no clear path
to resolution yet but users may see them and report them in the meantime.
The second is that this option was renamed from
CONFIG_UBSAN_SIGNED_WRAP, meaning that if a configuration has
CONFIG_UBSAN=y but CONFIG_UBSAN_SIGNED_WRAP=n and it is upgraded via
olddefconfig (common in non-interactive scenarios such as CI),
CONFIG_UBSAN_INTEGER_WRAP will be silently enabled again.
Remove 'default UBSAN' from CONFIG_UBSAN_INTEGER_WRAP until it is ready
for regular usage and testing from a broader community than the folks
actively working on the feature.
Cc: stable@vger.kernel.org
Fixes: 557f8c582a ("ubsan: Reintroduce signed overflow sanitizer")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20250414-drop-default-ubsan-integer-wrap-v1-1-392522551d6b@kernel.org
Signed-off-by: Kees Cook <kees@kernel.org>
When we invoke strscpy() with a maximum size of N bytes, it assumes
that:
- It can always read N bytes from the source.
- It always write N bytes (zero-padded) to the destination.
On aarch64 with Memory Tagging Extension enabled if we pass an N that is
bigger then the source buffer, it would previously trigger an MTE fault.
Implement a KASAN KUnit test that triggers the issue with the previous
implementation of read_word_at_a_time() on aarch64 with MTE enabled.
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Co-developed-by: Peter Collingbourne <pcc@google.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Link: https://linux-review.googlesource.com/id/If88e396b9e7c058c1a4b5a252274120e77b1898a
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250403000703.2584581-3-pcc@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
The call to read_word_at_a_time() in sized_strscpy() is problematic
with MTE because it may trigger a tag check fault when reading
across a tag granule (16 bytes) boundary. To make this code
MTE compatible, let's start using load_unaligned_zeropad()
on architectures where it is available (i.e. architectures that
define CONFIG_DCACHE_WORD_ACCESS). Because load_unaligned_zeropad()
takes care of page boundaries as well as tag granule boundaries,
also disable the code preventing crossing page boundaries when using
load_unaligned_zeropad().
Signed-off-by: Peter Collingbourne <pcc@google.com>
Link: https://linux-review.googlesource.com/id/If4b22e43b5a4ca49726b4bf98ada827fdf755548
Fixes: 94ab5b61ee ("kasan, arm64: enable CONFIG_KASAN_HW_TAGS")
Cc: stable@vger.kernel.org
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20250403000703.2584581-2-pcc@google.com
Signed-off-by: Kees Cook <kees@kernel.org>
Merge series from Richard Fitzgerald <rf@opensource.cirrus.com>:
formance low-power audio DSP with analog and
PDM digital inputs and support for low-power always-on voice-trigger
functionality.
This series adds the devicetree bindings and the ASoC codec driver.
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
A codec endpoint may not be used. We could check the present SDCA
functions to know if the endpoint is used or not. Skip the endpoint
which is not used. And load the topology dynamically for each endpoint.
With this feature, we don't need to use the quirk to determine the
existence of the optional codec DAIs.
Shorten X86_FEATURE_AMD_HETEROGENEOUS_CORES to X86_FEATURE_AMD_HTR_CORES
to make the last column aligned consistently in the whole file.
No functional changes.
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250415175410.2944032-4-xin@zytor.com
Shorten X86_FEATURE_CLEAR_BHB_LOOP_ON_VMEXIT to
X86_FEATURE_CLEAR_BHB_VMEXIT to make the last column aligned
consistently in the whole file.
There's no need to explain in the name what the mitigation does.
No functional changes.
Suggested-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250415175410.2944032-3-xin@zytor.com
It is a special file with special formatting so remove one whitespace
damage and format newer defines like the rest.
No functional changes.
[ Xin: Do the same to tools/arch/x86/include/asm/cpufeatures.h. ]
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/20250415175410.2944032-2-xin@zytor.com
Remove the suppression of the uevents before scanning for partitions.
The partitions inherit their suppression settings from their parent device,
which lead to the uevents being dropped.
This is similar to the same changes for LOOP_CONFIGURE done in
commit bb430b6942 ("loop: LOOP_CONFIGURE: send uevents for partitions").
Fixes: 498ef5c777 ("loop: suppress uevents while reconfiguring the device")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20250415-loop-uevent-changed-v3-1-60ff69ac6088@linutronix.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
On malfunctioning hardware, timeout error messages can appear thousands
of times, creating unnecessary system pressure and log bloat. This patch
makes two improvements:
1. Replace dev_err() with dev_err_ratelimited() to prevent log flooding
when hardware errors persist
2. Remove the redundant timeout value parameter from the error message,
as 'ret' is always zero in this error path
These changes reduce logging overhead while maintaining necessary error
reporting for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-2-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Some machines with tegra_qspi_combined_seq_xfer hardware issues generate
excessive kernel warnings, severely polluting the logs:
dmesg | grep -i "WARNING:.*tegra_qspi_transfer_one_message" | wc -l
94451
This patch replaces WARN_ON with WARN_ON_ONCE for timeout conditions to
reduce log spam. The subsequent error message still prints on each
occurrence, providing sufficient information about the failure, while
the stack trace is only needed once for debugging purposes.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20250401-tegra-v2-1-126c293ec047@debian.org
Signed-off-by: Mark Brown <broonie@kernel.org>
GNU Make 4.3 changed the behavior of `#` inside commands in commit
c6966b323811 ("[SV 20513] Un-escaped # are not comments in function
invocations"):
* WARNING: Backward-incompatibility!
Number signs (#) appearing inside a macro reference or function invocation
no longer introduce comments and should not be escaped with backslashes:
thus a call such as:
foo := $(shell echo '#')
is legal. Previously the number sign needed to be escaped, for example:
foo := $(shell echo '\#')
Now this latter will resolve to "\#". If you want to write makefiles
portable to both versions, assign the number sign to a variable:
H := \#
foo := $(shell echo '$H')
This was claimed to be fixed in 3.81, but wasn't, for some reason.
To detect this change search for 'nocomment' in the .FEATURES variable.
Unlike other commits in the kernel about this issue, such as commit
633174a704 ("lib/raid6/test/Makefile: Use $(pound) instead of \#
for Make 4.3"), that fixed the issue for newer GNU Makes, in our case
it was the opposite, i.e. we need to fix it for the older ones: someone
building with e.g. 4.2.1 gets the following error:
scripts/Makefile.compiler:81: *** unterminated call to function 'call': missing ')'. Stop.
Thus use the existing variable to fix it.
Reported-by: moyi geek <1441339168@qq.com>
Closes: https://rust-for-linux.zulipchat.com/#narrow/channel/291565/topic/x/near/512001985
Cc: stable@vger.kernel.org
Fixes: e72a076c62 ("kbuild: fix issues with rustc-option")
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20250414171241.2126137-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Mention the new 'intel_c1_demotion' sysfs file in the "cpuidle" section
and refer to "Documentation/admin-guide/pm/intel_idle.rst" for more
information.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20250317135541.1471754-4-dedekind1@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add a sysfs knob to enable/disable C1 demotion for the following Intel
platforms: Sapphire Rapids Xeon, Emerald Rapids Xeon, Granite Rapids Xeon,
Sierra Forest Xeon, and Grand Ridge SoC.
This sysfs file shows up as
"/sys/devices/system/cpu/cpuidle/intel_c1_demotion".
The C1 demotion feature involves the platform firmware demoting deep
C-state requests from the OS (e.g., C6 requests) to C1. The idea is
that firmware monitors CPU wake-up rate, and if it is higher than a
platform-specific threshold, the firmware demotes deep C-state
requests to C1. For example, Linux requests C6, but firmware noticed
too many wake-ups per second, and it keeps the CPU in C1. When the
CPU stays in C1 long enough, the platform promotes it back to C6.
The default value for C1 demotion is whatever is configured by BIOS.
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
Link: https://patch.msgid.link/20250317135541.1471754-2-dedekind1@gmail.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
devm_kasprintf() returns NULL when memory allocation fails. Currently,
wled_configure() does not check for this case, which results in a NULL
pointer dereference.
Add NULL check after devm_kasprintf() to prevent this issue.
Fixes: f86b77583d ("backlight: pm8941: Convert to using %pOFn instead of device_node.name")
Signed-off-by: Henry Martin <bsdhenrymartin@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: "Daniel Thompson (RISCstar)" <danielt@kernel.org>
Link: https://lore.kernel.org/r/20250401091647.22784-1-bsdhenrymartin@gmail.com
Signed-off-by: Lee Jones <lee@kernel.org>
pm_runtime_autosuspend() got accidentally renamed as
__pm_runtime_autosuspend() whereas the intention in the
patch was to rename pm_runtime_put_autosuspend() only.
Fix it.
Fixes: b7d46644e5 ("PM: runtime: Add pm_runtime_put_autosuspend() replacement")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patch.msgid.link/20250410153106.4146265-2-sakari.ailus@linux.intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
-Wflex-array-member-not-at-end was introduced in GCC-14, and we are
getting ready to enable it, globally.
Replace an on-stack definition of a flexible structure with a call
to utility function cros_ec_cmd().
So, with these changes, fix the following warning:
drivers/leds/leds-cros_ec.c:70:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Acked-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/Z-rKcgFjsyKvd58q@kspp
Signed-off-by: Lee Jones <lee@kernel.org>
GCC compiler complains about snprintf() calls that may potentially cut
the output:
drivers/leds/led-core.c:551:78: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
drivers/leds/led-core.c:554:78: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
...
Fix these by checking for the potential overflow. This requires
to align all the branches to use the same callee, i.e. snprintf(),
otherwise the code will be blown up and return different error codes
for the different branches.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20250318160524.2979982-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Lee Jones <lee@kernel.org>
Accept "default" written to sysfs trigger attr.
If the text "default" is written to the LED's sysfs 'trigger' attr, then
call led_trigger_set_default() to set the LED to its default trigger.
If the default trigger is set to "none", then led_trigger_set_default()
will remove a trigger. This is in contrast to the default trigger being
unset, in which case led_trigger_set_default() does nothing.
Signed-off-by: Craig McQueen <craig@mcqueen.au>
Reviewed-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Link: https://lore.kernel.org/r/20250317022630.424015-1-craig@mcqueen.au
Signed-off-by: Lee Jones <lee@kernel.org>
Panther Lake uses the same DLVR register offsets as Lunar Lake, but the
driver uses the default register offsets table for it by mistake.
Move the selection of register offsets table from the actual attribute
read/write callbacks to proc_thermal_rfim_add() and make it handle
Panther Lake the same way as Lunar Lake. This way it is clean and in
the future such issues can be avoided.
Fixes: e50eeababa ("thermal: intel: int340x: Panther Lake DLVR support")
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250411115438.594114-1-srinivas.pandruvada@linux.intel.com
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add basic configs to run kunit tests on some more PowerPC variants.
Link: https://lore.kernel.org/r/20250415-kunit-ppc-v1-2-f5a170264147@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
The configuration generated by kunit ends up with big endian.
A new kunit configuration for little endian is to be added.
To make the difference clearer spell out the endianness in the kunit
reference config.
Link: https://lore.kernel.org/r/20250415-kunit-ppc-v1-1-f5a170264147@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
To implement custom scripting around kunit.py it is useful to get a list of
available architectures. While it is possible to manually inspect
tools/testing/kunit/qemu_configs/, this is annoying to implement and
introduces a dependency on a kunit.py implementation detail.
Introduce 'kunit.py run --arch help' which lists all known architectures
in an easy to parse list. This is equivalent on how QEMU implements
listing of possible argument values.
Link: https://lore.kernel.org/r/20250415-kunit-list-v2-1-aa452cd317ae@linutronix.de
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Rae Moar <rmoar@google.com>
Reviewed-by: David Gow <davidgow@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
DVFS (Dynamic Voltage Frequency Scaling) is still supported for DDR
memory on Lunar Lake and Panther Lake.
Add the missing flag PROC_THERMAL_FEATURE_DVFS.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Link: https://patch.msgid.link/20250410172943.577913-1-srinivas.pandruvada@linux.intel.com
[ rjw: Subject edit ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
All callback implementers have been moved to the const variant of the
callbacks. The signature of the original callbacks can now be changed.
Also remove the now unnecessary transition machinery inside __BIN_ATTR().
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Link: https://lore.kernel.org/r/20250313-sysfs-const-bin_attr-final-v2-1-96284e1e88ce@weissschuh.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
software_node_get_reference_args() wants to get @index-th element, so
the property value requires at least '(index + 1) * sizeof(*ref)' bytes
but that can not be guaranteed by current OOB check, and may cause OOB
for malformed property.
Fix by using as OOB check '((index + 1) * sizeof(*ref) > prop->length)'.
Reviewed-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
Link: https://lore.kernel.org/r/20250414-fix_swnode-v2-1-9c9e6ae11eab@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wentong is no longer with Intel, I will take over as the maintainer of the
Intel LJCA driver.
Signed-off-by: Zhang Lixu <lixu.zhang@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Acked-by: Wentong Wu <wentongw@amazon.com>
Link: https://lore.kernel.org/r/20250221083713.25947-1-lixu.zhang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
