All models with the "AWCC" WMAX device support a way of manually
controlling fans.
The PWM duty cycle of a fan can't be controlled directly. Instead the
AWCC interface let's us tune a fan `boost` value, which has the
following empirically discovered, approximate behavior over the PWM
value:
pwm = pwm_base + (fan_boost / 255) * (pwm_max - pwm_base)
Where the pwm_base is the locked PWM value controlled by the FW and
fan_boost is a value between 0 and 255.
Expose this fan_boost knob as a custom HWMON attribute.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-8-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add tracking of command queue ID in JOB debug message to improve
debugging capabilities.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155939.4049467-1-maciej.falkowski@linux.intel.com
All models with the "AWCC" WMAX device support monitoring fan speed and
temperature sensors. Expose this feature through the HWMON interface.
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Jean Delvare <jdelvare@suse.com>
Cc: linux-hwmon@vger.kernel.org
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-7-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
All models with the "AWCC" WMAX device support a "custom" thermal
profile. In some models this profile signals user-space that the user
wants to manually control the fans, which are always unlocked. In other
models it actually unlocks manual fan control.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-6-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Get and store the AWCC system description in alienware_awcc_setup()
instead of awcc_platform_profile_probe() and get the correct offset by
iterating through each member of the system_description.
Then add a debug message for unmatched profiles and replace set_bit()
with it's non-atomic version __set_bit() because the choices bitmap only
belongs to this thread.
In the process also check for a malformed system description by defining
an arbitrary limit of resource count.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-5-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename supported_thermal_profiles[] -> supported_profiles[] and change
it's type to u8 because it stores AWCC thermal IDs.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-4-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Inline all AWCC WMI helper methods and directly return the newly
introduced awcc_wmi_command() helper to simplify implementation.
Drop awcc_thermal_control() in favor of awcc_op_activate_profile().
Add awcc_op_get_resource_id(), awcc_op_get_current_profile() and a new
failure code.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-3-a14ea39d8a94@gmail.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Rename AWCC_SENSOR_ID_MASK to AWCC_SENSOR_ID_FLAG and reorder the ID
processing defines in a more logical manner. Then replace their use in
bitwise operations with FIELD_GET().
The latter also involves dropping the AWCC_SENSOR_ID_FLAG check inside
is_awcc_thermal_mode() in favor of extracting the first byte out of IDs
obtained with AWCC_OP_GET_RESOURCE_ID. This is also a requirement to add
support for Alienware Aurora desktops.
While at it, also rename is_awcc_thermal_mode() to
is_awcc_thermal_profile_id().
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-2-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The "thermal" features of the WMAX WMI device are only present on the
host device if the ACPI _UID is "AWCC". Replace WMAX prefixes with
"AWCC" to reflect this relationship.
Thermal profiles with WMAX_PROFILE_BASIC prefix are also renamed to
WMAX_PROFILE_LEGACY because they are only supported in older versions
of this WMI device.
Finally, shorten enum defines for AWCC operations from WMAX_OPERATION_*
to AWCC_OP_*.
Reviewed-by: Armin Wolf <W_Armin@gmx.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Kurt Borja <kuurtb@gmail.com>
Link: https://lore.kernel.org/r/20250329-hwm-v7-1-a14ea39d8a94@gmail.com
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Add sysfs files that show maximum and current
frequency of the NPU's data processing unit.
New sysfs entries:
- npu_max_frequency_mhz
- npu_current_frequency_mhz
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155912.4049340-3-maciej.falkowski@linux.intel.com
Fix the frequency returned to the user space by
the DRM_IVPU_PARAM_CORE_CLOCK_RATE GET_PARAM IOCTL.
The kernel driver returned CPU frequency for MTL and bare
PLL frequency for LNL - this was inconsistent and incorrect
for both platforms. With this fix the driver returns maximum
frequency of the NPU data processing unit (DPU) for all HW
generations. This is what user space always expected.
Also do not set CPU frequency in boot params - the firmware
does not use frequency passed from the driver, it was only
used by the early pre-production firmware.
With that we can remove CPU frequency calculation code.
Show NPU frequency in FREQ_CHANGE interrupt when frequency
tracking is enabled.
Fixes: 8a27ad81f7 ("accel/ivpu: Split IP and buttress code")
Cc: stable@vger.kernel.org # v6.11+
Signed-off-by: Andrzej Kacprowski <Andrzej.Kacprowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155912.4049340-2-maciej.falkowski@linux.intel.com
On some platforms it has been observed that STT limits are not being
applied properly causing poor performance as power limits are set too low.
STT limits that are sent to the platform are supposed to be in Q8.8
format. Convert them before sending.
Reported-by: Yijun Shen <Yijun.Shen@dell.com>
Fixes: 7c45534afa ("platform/x86/amd/pmf: Add support for PMF Policy Binary")
Cc: stable@vger.kernel.org
Tested-by: Yijun Shen <Yijun_Shen@Dell.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250407181915.1482450-1-superm1@kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A warning is seen when running the latest kernel on a BlueField SOC:
[251.512704] ------------[ cut here ]------------
[251.512711] invalid sysfs_emit: buf:0000000003aa32ae
[251.512720] WARNING: CPU: 1 PID: 705264 at fs/sysfs/file.c:767 sysfs_emit+0xac/0xc8
The warning is triggered because the mlxbf-bootctl driver invokes
"sysfs_emit()" with a buffer pointer that is not aligned to the
start of the page. The driver should instead use "sysfs_emit_at()"
to support non-zero offsets into the destination buffer.
Fixes: 9886f575de ("platform/mellanox: mlxbf-bootctl: use sysfs_emit() instead of sprintf()")
Signed-off-by: David Thompson <davthompson@nvidia.com>
Link: https://lore.kernel.org/r/20250407132558.2418719-1-davthompson@nvidia.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
Both are x86 ACPI tablets which ships with Android x86 as factory OS.
with a DSDT which contains a bunch of I2C devices which are not actually
there, causing various resource conflicts. Enumeration of these is skipped
through the acpi_quirk_skip_i2c_client_enumeration().
Extend the existing support for the 9V version by adding support for
manually instantiating the I2C devices which are actually present on
the 5V version by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250407092017.273124-2-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The Vexia EDU ATLA 10 tablet comes in 2 different versions with
significantly different mainboards. The only outward difference is that
the charging barrel on one is marked 5V and the other is marked 9V.
Both need to be handled by the x86-android-tablets code. Add 9v to
the symbols for the existing support for the 9V Vexia EDU ATLA 10 tablet
symbols to prepare for adding support for the 5V version.
All this patch does is s/vexia_edu_atla10_info/vexia_edu_atla10_9v_info/.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20250407092017.273124-1-hdegoede@redhat.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
The value returned by acpi_evaluate_integer() is not checked,
but the result is not always successful, so it is necessary to
add a check of the returned value.
If the result remains negative during three iterations of the loop,
then the uninitialized variable 'val' will be used in the clamp_val()
macro, so it must be initialized with the current value of the 'curr'
variable.
In this case, the algorithm should be less noisy.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: b23910c219 ("asus-laptop: Pegatron Lucid accelerometer")
Cc: stable@vger.kernel.org
Signed-off-by: Denis Arefev <arefev@swemel.ru>
Link: https://lore.kernel.org/r/20250403122603.18172-1-arefev@swemel.ru
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Update firmware Boot API to 3.28.3 version and
adjust driver to API changes for preemption buffers.
Use new preemption buffer size fields from FW header added to
firmware boot API for preemption buffers allocations,
if those new fields are zeroed, use old values instead.
Signed-off-by: Karol Wachowski <karol.wachowski@intel.com>
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155817.4049220-1-maciej.falkowski@linux.intel.com
Use flush_work() instead of cancel_work_sync() for driver IRQ
workqueues to guarantee that remaining pending work
will be handled.
This resolves two issues that were encountered where a driver was left
in an incorrect state as the bottom-half was canceled:
1. Cancelling context-abort of a job that is still executing and
is causing translation faults which is going to cause additional TDRs
2. Cancelling bottom-half of a DCT (duty-cycle throttling) request
which will cause a device to not be adjusted to an external frequency
request.
Fixes: bc3e5f48b7 ("accel/ivpu: Use workqueue for IRQ handling")
Signed-off-by: Maciej Falkowski <maciej.falkowski@linux.intel.com>
Reviewed-by: Lizhi Hou <lizhi.hou@amd.com>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Signed-off-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com>
Link: https://lore.kernel.org/r/20250401155755.4049156-1-maciej.falkowski@linux.intel.com
Hypercall detection is failing with xen_hypercall_intel() chosen even on
an AMD processor. Looking at the disassembly, the call to
xen_get_vendor() was removed.
The check for boot_cpu_has(X86_FEATURE_CPUID) was used as a proxy for
the x86_vendor having been set.
When CONFIG_X86_REQUIRED_FEATURE_CPUID=y (the default value), DCE eliminates
the call to xen_get_vendor(). An uninitialized value 0 means
X86_VENDOR_INTEL, so the Intel function is always returned.
Remove the if and always call xen_get_vendor() to avoid this issue.
Fixes: 3d37d9396e ("x86/cpufeatures: Add {REQUIRED,DISABLED} feature configs")
Suggested-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Jason Andryuk <jason.andryuk@amd.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: "Xin Li (Intel)" <xin@zytor.com>
Link: https://lore.kernel.org/r/20250410193106.16353-1-jason.andryuk@amd.com
Reference header files using their canonical form <linux/cacheinfo.h>.
Standardize on CPUID(0xN), instead of CPUID(N), for all standard leaves.
This removes ambiguity and aligns them with their extended counterparts
like CPUID(0x8000001d).
References: 0dd09e215a ("x86/cacheinfo: Apply maintainer-tip coding style fixes")
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: John Ogness <john.ogness@linutronix.de>
Link: https://lore.kernel.org/r/20250411070401.1358760-3-darwi@linutronix.de
The CPUID(0x2) cache descriptors iterator at <cpuid/leaf_0x2_api.h>:
for_each_leaf_0x2_desc()
has no more call sites. Remove it.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20250411070401.1358760-2-darwi@linutronix.de
Simplify the alternatives interface some more by moving the
poke_batch_finish check into poke_batch_process and renaming the latter.
The net effect is one less function name to consider when reading the
code.
Signed-off-by: Nikolay Borisov <nik.borisov@suse.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-54-mingo@kernel.org
- Capitalize 'INT3' consistently,
- make it clear that 'sync cores' means an SMP sync to all CPUs,
- fix typos and spelling.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-51-mingo@kernel.org
It only has a single user left, merge it into smp_text_poke_batch_add()
and remove the helper function.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-50-mingo@kernel.org
Move it from the middle of a .c file next to the similar declarations
of __alt_instructions[] et al.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-49-mingo@kernel.org
We accumulated lots of unnecessary header inclusions over the years,
trim them.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-48-mingo@kernel.org
- No need to cast over to 'struct smp_text_poke_loc *', void * is just fine
for a binary search,
- Use the canonical (a, b) input parameter nomenclature of cmp_func_t
functions and rename the input parameters from (tp, elt) to
(tpl_a, tpl_b).
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-44-mingo@kernel.org
This will also allow the simplification of patch_cmp().
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-43-mingo@kernel.org
- Use direct 'void *' pointer comparison, there's no
need to force the type to 'unsigned long'.
- Remove the 'tp' local variable indirection
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-42-mingo@kernel.org
Unlike sync_core(), text_poke_sync() is a very heavy operation, as
it sends an IPI to every online CPU in the system and waits for
completion.
Reflect this in the name.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-41-mingo@kernel.org
At this point smp_text_poke_single(addr, opcode, len, emulate) is equivalent to:
smp_text_poke_batch_add(addr, opcode, len, emulate);
smp_text_poke_batch_finish();
So remove the restriction on mixing single-instruction patching
with multi-instruction patching.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-37-mingo@kernel.org
This function is now using the text_poke_array state exclusively,
make that explicit by removing the redundant input parameters.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-34-mingo@kernel.org
There's no need to return a pointer on success - it's always
the same pointer.
Return a bool instead.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-32-mingo@kernel.org
Just like with try_get_text_poke_array(), this name better reflects
what the underlying code is doing, there's no 'descriptor'
indirection anymore.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-31-mingo@kernel.org
At this point we are always working out of an uptodate
text_poke_array, there's no need for smp_text_poke_int3_handler()
to read via the int3_vec indirection - remove it.
This simplifies the code:
1 file changed, 5 insertions(+), 15 deletions(-)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-29-mingo@kernel.org
struct text_poke_array is an equivalent structure to these global variables:
static struct smp_text_poke_loc tp_vec[TP_VEC_MAX];
static int tp_vec_nr;
Note that we intentionally mirror much of the naming of
'struct text_poke_int3_vec', which will further highlight
the unecessary layering going on in this code, and will
ease its removal.
No change in functionality.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-28-mingo@kernel.org
At this point the 'tp' input parameter must always be the
global 'tp_vec' array, and 'nr_entries' must always be equal
to 'tp_vec_nr'.
Assert these conditions - which will allow the removal of
a layer of indirection between these values.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Juergen Gross <jgross@suse.com>
Cc: "H . Peter Anvin" <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20250411054105.2341982-27-mingo@kernel.org