The s390 common I/O layer (CIO) returns an unexpected -EBUSY return code
when drivers try to start I/O while a path-verification (PV) process is
pending. This can lead to failed device initialization attempts with
symptoms like broken network connectivity after boot.
Fix this by replacing the -EBUSY return code with a deferred condition
code 1 reply to make path-verification handling consistent from a
driver's point of view.
The problem can be reproduced semi-regularly using the following process,
while repeating steps 2-3 as necessary (example assumes an OSA device
with bus-IDs 0.0.a000-0.0.a002 on CHPID 0.02):
1. echo 0.0.a000,0.0.a001,0.0.a002 >/sys/bus/ccwgroup/drivers/qeth/group
2. echo 0 > /sys/bus/ccwgroup/devices/0.0.a000/online
3. echo 1 > /sys/bus/ccwgroup/devices/0.0.a000/online ; \
echo on > /sys/devices/css0/chp0.02/status
Background information:
The common I/O layer starts path-verification I/Os when it receives
indications about changes in a device path's availability. This occurs
for example when hardware events indicate a change in channel-path
status, or when a manual operation such as a CHPID vary or configure
operation is performed.
If a driver attempts to start I/O while a PV is running, CIO reports a
successful I/O start (ccw_device_start() return code 0). Then, after
completion of PV, CIO synthesizes an interrupt response that indicates
an asynchronous status condition that prevented the start of the I/O
(deferred condition code 1).
If a PV indication arrives while a device is busy with driver-owned I/O,
PV is delayed until after I/O completion was reported to the driver's
interrupt handler. To ensure that PV can be started eventually, CIO
reports a device busy condition (ccw_device_start() return code -EBUSY)
if a driver tries to start another I/O while PV is pending.
In some cases this -EBUSY return code causes device drivers to consider
a device not operational, resulting in failed device initialization.
Note: The code that introduced the problem was added in 2003. Symptoms
started appearing with the following CIO commit that causes a PV
indication when a device is removed from the cio_ignore list after the
associated parent subchannel device was probed, but before online
processing of the CCW device has started:
2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
During boot, the cio_ignore list is modified by the cio_ignore dracut
module [1] as well as Linux vendor-specific systemd service scripts[2].
When combined, this commit and boot scripts cause a frequent occurrence
of the problem during boot.
[1] https://github.com/dracutdevs/dracut/tree/master/modules.d/81cio_ignore
[2] https://github.com/SUSE/s390-tools/blob/master/cio_ignore.service
Cc: stable@vger.kernel.org # v5.15+
Fixes: 2297791c92 ("s390/cio: dont unregister subchannel from child-drivers")
Tested-By: Thorsten Winkler <twinkler@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Signed-off-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Michael Chan says:
====================
bnxt_en: Ntuple filter improvements
The current Ntuple filter implementation has a limitation on 5750X (P5)
and newer chips. The destination ring of the ntuple filter must be
a valid ring in the RSS indirection table. Ntuple filters may not work
if the RSS indirection table is modified by the user to only contain a
subset of the rings. If an ntuple filter is set to a ring destination
that is not in the RSS indirection table, the packet matching that
filter will be placed in a random ring instead of the specified
destination ring.
This series of patches will fix the problem by using a separate VNIC
for ntuple filters. The default VNIC will be dedicated for RSS and
so the indirection table can be setup in any way and will not affect
ntuple filters using the separate VNIC.
Quite a bit of refactoring is needed to do the the VNIC and RSS
context accounting in the first few patches. This is technically a
bug fix, but I think the changes are too big for -net.
====================
Link: https://lore.kernel.org/r/20240220230317.96341-1-michael.chan@broadcom.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The newly created vnic (BNXT_VNIC_NTUPLE) is ready to be used to create
ntuple filters when supported by firmware. All RX rings can be used
regardless of the RSS indirection setting on the default VNIC.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Allocate and setup the additional VNIC for ntuple filters if this
new method is supported by the firmware. Even though this VNIC is
only used for ntuple filters with direct ring destinations, we still
setup the RSS hash to be identical to the default VNIC so that each
RX packet will have the correct hash in the RX completion. This
VNIC is always at VNIC index BNXT_VNIC_NTUPLE.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On newer chips that support the ring table index method for
ntuple filters, the current scheme of using the same VNIC for
both RSS and ntuple filters will not work in all cases. An
ntuple filter can only be directed to a destination ring if
that destination ring is also in the RSS indirection table.
To support ntuple filters with any arbitratry RSS indirection
table that may only include a subset of the rings, we need to
use a separate VNIC for ntuple filters.
This patch provisions the additional VNIC. The next patch will
allocate additional VNIC from firmware and set it up.
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Replace hard coded 0 index with more meaningful BNXT_VNIC_DEFAULT.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor bnxt_set_features() function to have a common
function to re-init. We'll need this to reinitialize when
ntuple configuration changes.
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com>
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Refactor the code by adding a new function to calculate the number of
required VNICs. This is used in multiple places when reserving or
checking resources.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Venkat Duvvuru <venkatkumar.duvvuru@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
bnxt_check_rings() is called to check if we have enough resource
assets to satisfy the new number of ethtool channels. If the asset
test fails, the ethtool operation will fail gracefully. Otherwise
we will proceed and commit to use the new number of channels. If it
fails to allocate any resources, the chip will fail to come up.
For completeness, check all possible resources before committing to
the new settings. Add the missing ring group and RSS context asset
tests in bnxt_check_rings().
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add RSS context fields to struct bnxt_hw_rings and struct bnxt_hw_resc.
With these, we can now specific the exact number of RSS contexts to
reserve and store the reserved value. The original code relies on
other resources to infer the number of RSS contexts to reserve and the
reserved value is not stored. This improved infrastructure will make
the RSS context accounting more complete and is needed by later
patches.
Signed-off-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current code assumes that every RX ring group and every TX ring
requires a completion ring on P5_PLUS chips. Now that we have the
bnxt_hw_rings structure, add the cp_p5 field so that it can
be explicitly specified. This makes the logic more clear.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The current functions to reserve hardware rings pass in 6 different ring
or resource types as parameters. Add a structure bnxt_hw_rings to
consolidate all these parameters and pass the structure pointer instead
to these functions. Add 2 related helper functions also. This makes
the code cleaner and makes it easier to add new resources to be
reserved.
Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com>
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Since commit aed65af1cc ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
dsa_device_type, iax_device_type, idxd_wq_device_type, idxd_cdev_file_type,
idxd_cdev_device_type and idxd_group_device_type variables to be constant
structures as well, placing it into read-only memory which can not be
modified at runtime.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: "Ricardo B. Marliere" <ricardo@marliere.net>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240219-device_cleanup-dmaengine-v1-1-9f72f3cf3587@marliere.net
Signed-off-by: Vinod Koul <vkoul@kernel.org>
With a later patch it becomes necessary to already now the number of PWM
lines when pwmc is allocated. So make the function not use pwmc but a
plain connection and return the number of lines instead of storing it in
pwmc. This allows to get rid of the pwm_max member.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/3efd84ac03e7dc288f20b0de20b142b6404cb1fa.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The driver never calls gb_connection_get_data(). If there was another
caller (say the greybus core) it cannot use the value because the type
of pwmc (= struct gb_pwm_chip) is only defined in the pwm driver.
So drop the call to gb_connection_set_data().
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/bd2759c325c295f3d9f990609d97eb83a8ca88b8.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This prepares the driver for further changes that will make it harder to
determine the pwm_chip from a given gb_pwm_chip. To just not have
to do that, rework gb_pwm_activate_operation(),
gb_pwm_deactivate_operation(), gb_pwm_config_operation(),
gb_pwm_set_polarity_operation(), gb_pwm_enable_operation() and
gb_pwm_disable_operation() to take a pwm_chip. Also use the pwm_chip as
driver data instead of the gb_pwm_chip.
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://lore.kernel.org/r/ef9b346d5bab508d4ded81cf115bf244938d04f1.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This prepares the pwm driver of the ti-sn65dsi86 to further changes of
the pwm core outlined in the commit introducing devm_pwmchip_alloc().
There is no intended semantical change and the driver should behave as
before.
Acked-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/a56cbaf049f5f23c0e0fe36b0799dd20189675e0.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This prepares the pwm-vt8500 driver to further changes of the pwm core
outlined in the commit introducing devm_pwmchip_alloc(). There is no
intended semantical change and the driver should behave as before.
Also convert the to_vt8500_chip() helper macro to a static inline to
get some type safety.
Link: https://lore.kernel.org/r/b203c4448db23ebad1165b7bce43ac41468c4e89.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This prepares the driver for further changes that will make it harder to
determine the pwm_chip from a given ehrpwm_pwm_chip. To just not have to
do that, rework ehrpwm_pwm_save_context() and
ehrpwm_pwm_restore_context() take a pwm_chip. Also use the pwm_chip as
driver data instead of the ehrpwm_pwm_chip.
Link: https://lore.kernel.org/r/79052207cdf71f0882ae13fe1a192ef6f6dba35b.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
This prepares the driver for further changes that will make it harder to
determine the pwm_chip from a given ecap_pwm_chip. To just not have to
do that, rework ecap_pwm_save_context() and ecap_pwm_restore_context
take a pwm_chip. Also use the pwm_chip as driver data instead of the
ecap_pwm_chip.
Link: https://lore.kernel.org/r/ed031f201ff52c6b298de2dc81b06aad3a0207f8.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
The driver uses three different names for variables of type
sun4i_pwm_chip:
$ git grep 'struct sun4i_pwm_chip \*' v6.8-rc1 -- drivers/pwm/pwm-sun4i.c
v6.8-rc1:drivers/pwm/pwm-sun4i.c:static inline struct sun4i_pwm_chip *to_sun4i_pwm_chip(struct pwm_chip *chip)
v6.8-rc1:drivers/pwm/pwm-sun4i.c:static inline u32 sun4i_pwm_readl(struct sun4i_pwm_chip *chip,
v6.8-rc1:drivers/pwm/pwm-sun4i.c:static inline void sun4i_pwm_writel(struct sun4i_pwm_chip *chip,
v6.8-rc1:drivers/pwm/pwm-sun4i.c: struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
v6.8-rc1:drivers/pwm/pwm-sun4i.c:static int sun4i_pwm_calculate(struct sun4i_pwm_chip *sun4i_pwm,
v6.8-rc1:drivers/pwm/pwm-sun4i.c: struct sun4i_pwm_chip *sun4i_pwm = to_sun4i_pwm_chip(chip);
v6.8-rc1:drivers/pwm/pwm-sun4i.c: struct sun4i_pwm_chip *sun4ichip;
v6.8-rc1:drivers/pwm/pwm-sun4i.c: struct sun4i_pwm_chip *sun4ichip = platform_get_drvdata(pdev);
"chip" is usually reserved for variables of type struct pwm_chip. So
pick sun4ichip as common name which better matches the type name than
sun4i_pwm.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/705f54a13b59fff50eaa345d8b1e0c691345b996.1707900770.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>