Commit graph

1,308,922 commits

Author SHA1 Message Date
Nitin Yadav
d3ae4e8d8b arm64: dts: ti: k3-am62a-main: Add sdhci0 instance
Add sdhci0 DT node in k3-am62a-main for eMMC support. Add otap/itap
values according to the datasheet[0], refer to Table 7-79.

[0] https://www.ti.com/lit/ds/symlink/am62a3.pdf

Signed-off-by: Nitin Yadav <n-yadav@ti.com>
Signed-off-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240213235701.2438513-2-jm@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 12:02:47 +05:30
Masahiro Yamada
97a5253d7c powerpc: remove unused KCSAN_SANITIZE_early_64.o in Makefile
Commit 2fb857bc9f ("powerpc/kcsan: Add exclusions from instrumentation")
added KCSAN_SANITIZE_early_64.o to arch/powerpc/kernel/Makefile, while
it does not compile early_64.o.

Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240216135817.2003106-1-masahiroy@kernel.org
2024-02-19 16:16:58 +11:00
Gaurav Batra
a5c57fd2e9 powerpc/pseries/iommu: DLPAR add doesn't completely initialize pci_controller
When a PCI device is dynamically added, the kernel oopses with a NULL
pointer dereference:

  BUG: Kernel NULL pointer dereference on read at 0x00000030
  Faulting instruction address: 0xc0000000006bbe5c
  Oops: Kernel access of bad area, sig: 11 [#1]
  LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
  Modules linked in: rpadlpar_io rpaphp rpcsec_gss_krb5 auth_rpcgss nfsv4 dns_resolver nfs lockd grace fscache netfs xsk_diag bonding nft_compat nf_tables nfnetlink rfkill binfmt_misc dm_multipath rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_umad ib_iser libiscsi scsi_transport_iscsi ib_ipoib rdma_cm iw_cm ib_cm mlx5_ib ib_uverbs ib_core pseries_rng drm drm_panel_orientation_quirks xfs libcrc32c mlx5_core mlxfw sd_mod t10_pi sg tls ibmvscsi ibmveth scsi_transport_srp vmx_crypto pseries_wdt psample dm_mirror dm_region_hash dm_log dm_mod fuse
  CPU: 17 PID: 2685 Comm: drmgr Not tainted 6.7.0-203405+ #66
  Hardware name: IBM,9080-HEX POWER10 (raw) 0x800200 0xf000006 of:IBM,FW1060.00 (NH1060_008) hv:phyp pSeries
  NIP:  c0000000006bbe5c LR: c000000000a13e68 CTR: c0000000000579f8
  REGS: c00000009924f240 TRAP: 0300   Not tainted  (6.7.0-203405+)
  MSR:  8000000000009033 <SF,EE,ME,IR,DR,RI,LE>  CR: 24002220  XER: 20040006
  CFAR: c000000000a13e64 DAR: 0000000000000030 DSISR: 40000000 IRQMASK: 0
  ...
  NIP sysfs_add_link_to_group+0x34/0x94
  LR  iommu_device_link+0x5c/0x118
  Call Trace:
   iommu_init_device+0x26c/0x318 (unreliable)
   iommu_device_link+0x5c/0x118
   iommu_init_device+0xa8/0x318
   iommu_probe_device+0xc0/0x134
   iommu_bus_notifier+0x44/0x104
   notifier_call_chain+0xb8/0x19c
   blocking_notifier_call_chain+0x64/0x98
   bus_notify+0x50/0x7c
   device_add+0x640/0x918
   pci_device_add+0x23c/0x298
   of_create_pci_dev+0x400/0x884
   of_scan_pci_dev+0x124/0x1b0
   __of_scan_bus+0x78/0x18c
   pcibios_scan_phb+0x2a4/0x3b0
   init_phb_dynamic+0xb8/0x110
   dlpar_add_slot+0x170/0x3b8 [rpadlpar_io]
   add_slot_store.part.0+0xb4/0x130 [rpadlpar_io]
   kobj_attr_store+0x2c/0x48
   sysfs_kf_write+0x64/0x78
   kernfs_fop_write_iter+0x1b0/0x290
   vfs_write+0x350/0x4a0
   ksys_write+0x84/0x140
   system_call_exception+0x124/0x330
   system_call_vectored_common+0x15c/0x2ec

Commit a940904443 ("powerpc/iommu: Add iommu_ops to report capabilities
and allow blocking domains") broke DLPAR add of PCI devices.

The above added iommu_device structure to pci_controller. During
system boot, PCI devices are discovered and this newly added iommu_device
structure is initialized by a call to iommu_device_register().

During DLPAR add of a PCI device, a new pci_controller structure is
allocated but there are no calls made to iommu_device_register()
interface.

Fix is to register the iommu device during DLPAR add as well.

Fixes: a940904443 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains")
Signed-off-by: Gaurav Batra <gbatra@linux.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240215221833.4817-1-gbatra@linux.ibm.com
2024-02-19 16:16:34 +11:00
Manivannan Sadhasivam
dfc554d521 arm64: dts: sm8650: Add msi-map-mask for PCIe nodes
"msi-map-mask" is a required property for all Qcom PCIe controllers as it
would allow all PCIe devices under a bus to share the same MSI identifier.

Without this property, each device has to use a separate MSI identifier
which is not possible due to platform limitations.

Currently, this is not an issue since only one device is connected to the
bus on boards making use of this SoC.

Fixes: a33a532b3b ("arm64: dts: qcom: sm8650: Use GIC-ITS for PCIe0 and PCIe1")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240216-sm8550-msi-map-fix-v1-1-b66d83ce48b7@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-18 23:06:56 -06:00
Krzysztof Kozlowski
408e177651 arm64: dts: qcom: replace underscores in node names
Underscores should not be used in node names (dtc with W=2 warns about
them), so replace them with hyphens.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20240213145124.342514-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-18 23:02:55 -06:00
Stefan Hansson
450e178fac ARM: dts: qcom: samsung-matisse-common: Add UART
This was not enabled in the matisse-wifi tree. Without this, it is not
possible to use the USB port for serial debugging via a "Carkit debug
cable".

Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20240215180322.99089-5-newbyte@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-18 23:00:31 -06:00
Stefan Hansson
d305361f36 ARM: dts: qcom: Add support for Samsung Galaxy Tab 4 10.1 LTE (SM-T535)
Add a device tree for the Samsung Galaxy Tab 4 10.1 (SM-T535) LTE tablet
based on the MSM8926 platform.

The common dtsi is also modified to describe the widest constraints,
which required modifications to the matisse-wifi dts.

Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215180322.99089-4-newbyte@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-18 23:00:31 -06:00
Stefan Hansson
f91dc3e6f3 ARM: dts: qcom: samsung-matisse-common: Add initial common device tree
According to the dts from the kernel source code released by Samsung,
matissewifi and matisselte only have minor differences in hardware, so
use a shared dtsi to reduce duplicated code. Additionally, this should
make adding support for matisse3g easier should someone want to do that
at a later point.

As such, add a common device tree for all matisse devices by Samsung
based on the matissewifi dts. Support for matisselte will be introduced
in a later patch in this series and will use the common dtsi as well.

Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215180322.99089-2-newbyte@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-18 23:00:31 -06:00
Stefan Hansson
2a478a5218 dt-bindings: arm: qcom: Add Samsung Galaxy Tab 4 10.1 LTE
This documents Samsung Galaxy Tab 4 10.1 LTE (samsung,matisselte)
which is a tablet by Samsung based on the MSM8926 SoC.

Signed-off-by: Stefan Hansson <newbyte@postmarketos.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240215180322.99089-3-newbyte@postmarketos.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-18 23:00:21 -06:00
Luca Weiss
aa05f47474 dt-bindings: soc: qcom: qcom,saw2: add msm8226 l2 compatible
Add the compatible for the SAW2 for L2 cache found on MSM8226.

Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240210-msm8226-cpu-v2-1-5d9cb4c35204@z3ntu.xyz
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
2024-02-18 22:52:55 -06:00
Bhavya Kapoor
d29a6cf980 arm64: dts: ti: k3-j784s4-evm: Remove Pinmux for CTS and RTS in wkup_uart0
Only Tx and Rx Signal lines for wkup_uart0 are brought out on
the J784S4 EVM from SoC, but CTS and RTS signal lines are not
brought on the EVM. Thus, remove pinmux for CTS and RTS signal
lines for wkup_uart0 in J784S4.

Fixes: 6fa5d37a2f ("arm64: dts: ti: k3-j784s4-evm: Add mcu and wakeup uarts")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-5-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:59:27 +05:30
Bhavya Kapoor
28e5b74d52 arm64: dts: ti: k3-j721s2-common-proc-board: Remove Pinmux for CTS and RTS in wkup_uart0
Only Tx and Rx Signal lines for wkup_uart0 are brought out on
the Common Proc Board through SoM, but CTS and RTS signal lines
are not brought on the board. Thus, remove pinmux for CTS and RTS
signal lines for wkup_uart0 in J721S2.

Fixes: f5e9ee0b35 ("arm64: dts: ti: k3-j721s2-common-proc-board: Add uart pinmux")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-4-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:59:27 +05:30
Bhavya Kapoor
0fa8b0e208 arm64: dts: ti: k3-j7200-common-proc-board: Remove clock-frequency from mcu_uart0
Clock-frequency property is already present in mcu_uart0 node of the
k3-j7200-mcu-wakeup.dtsi file. Thus, remove redundant clock-frequency
property from mcu_uart0 node.

Fixes: 3709ea7f96 ("arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-3-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:59:27 +05:30
Bhavya Kapoor
566feddd2b arm64: dts: ti: k3-j7200-common-proc-board: Modify Pinmux for wkup_uart0 and mcu_uart0
WKUP_PADCONFIG registers for wkup_uart0 and mcu_uart0 lies
under wkup_pmx2 for J7200. Thus, modify pinmux for both
of them.

Fixes: 3709ea7f96 ("arm64: dts: ti: k3-j7200-common-proc-board: Add uart pinmux")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240214105846.1096733-2-b-kapoor@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:59:27 +05:30
Vaishnav Achath
f767eb9180 arm64: dts: ti: k3-j721e-sk: Add overlay for IMX219
RPi v2 Camera (IMX219) is an 8MP camera that can be used with SK-AM69,
J721E SK, and AM68 SK through the 22-pin CSI-RX connector.

Add a reference overlay for dual IMX219 RPI camera v2 modules
which can be used across AM68 SK, AM69 SK, TDA4VM SK boards
that have a 15/22-pin FFC connector. Also enable build testing
and symbols for all the three platforms.

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-10-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:56:40 +05:30
Vaishnav Achath
2ba8f21a74 arm64: dts: ti: k3-j784s4-main: Add CSI2RX capture nodes
J784S4 has three CSI2RX capture subsystem featuring Cadence CSI2RX,
DPHY and TI's pixel grabbing wrapper. Add nodes for the same and
keep them disabled by default. J784S4 uses a dedicated BCDMA instance
for CSI-RX traffic, so enable that as well.

J784S4 TRM (Section 12.7 Camera Subsystem):
	https://www.ti.com/lit/zip/spruj52

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-9-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:56:40 +05:30
Vaishnav Achath
6aac91999e arm64: dts: ti: k3-j721s2-main: Add CSI2RX capture nodes
J721S2 has two CSI2RX capture subsystem featuring Cadence CSI2RX,
DPHY and TI's pixel grabbing wrapper. Add nodes for the same and
keep them disabled by default. J721S2 uses a dedicated BCDMA instance
for CSI-RX traffic, so enable that as well.

J721S2 TRM (Section 12.7 Camera Subsystem):
	https://www.ti.com/lit/zip/spruj28

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-8-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:56:39 +05:30
Vaishnav Achath
491821cebc arm64: dts: ti: k3-j721e-main: Add CSI2RX capture nodes
J721E has two CSI2RX capture subsystem featuring Cadence CSI2RX,
DPHY and TI's pixel grabbing wrapper. Add nodes for the same and
keep them disabled by default.

J721E TRM (Section 12.7 Camera Subsystem):
	https://www.ti.com/lit/zip/spruil1

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-7-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:56:39 +05:30
Vaishnav Achath
f87c889473 arm64: dts: ti: k3-j721e-sk: Model CSI2RX connector mux
J721E SK has the CSI2RX routed to a MIPI CSI connector and to 15-pin
RPi camera connector through an analog mux with GPIO control, model that
so that an overlay can control the mux state according to connected
cameras. Also provide labels to the I2C mux bus instances so that a
generic overlay can be used across multiple platforms.

J721E SK schematics: https://www.ti.com/lit/zip/sprr438

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-6-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:56:39 +05:30
Vaishnav Achath
12d82b15b9 arm64: dts: ti: k3-am69-sk: Enable camera peripherals
CSI cameras are controlled using I2C. On AM69 Starter Kit, this is routed
to I2C-1, so enable the instance, TCA9543 I2C switch and the TCA6408
GPIO expander on the bus. AM69 SK has the CSI2RX routed to a MIPI CSI
connector and to 22-pin RPi camera connector through an analog mux with
GPIO control, model that so that an overlay can control the mux state
according to connected cameras.

AM69 SK schematics: https://www.ti.com/lit/zip/sprr466

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-5-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:56:39 +05:30
Vaishnav Achath
5dcc1aaf0b arm64: dts: ti: k3-am68-sk-base-board: Enable camera peripherals
CSI cameras are controlled using I2C. On AM68 Starter Kit, this is routed
to I2C-1, so enable the instance and the TCA9543 I2C switch on the bus.

AM68 SK schematics: https://www.ti.com/lit/zip/sprr463

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-4-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:56:39 +05:30
Vaishnav Achath
fa646b7096 arm64: dts: ti: k3-j784s4-evm: Enable camera peripherals
CSI cameras are controlled using I2C. On J784S4 EVM, this is routed
to I2C-5, so enable the instance and the TCA6408 GPIO expander
on the bus.

J784S4 EVM schematics: https://www.ti.com/lit/zip/sprr458

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-3-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:56:39 +05:30
Vaishnav Achath
f00c6ead15 arm64: dts: ti: k3-j721s2-common-proc-board: Enable camera peripherals
CSI cameras are controlled using I2C. On J721S2 Common Processor Board,
this is routed to I2C-5, so enable the instance and the TCA6408
GPIO expander on the bus.

Common Processor Board schematics: https://www.ti.com/lit/zip/sprr411
J721S2 SoM schematics: https://www.ti.com/lit/zip/sprr439

Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com>
Reviewed-by: Jai Luthra <j-luthra@ti.com>
Link: https://lore.kernel.org/r/20240215085518.552692-2-vaishnav.a@ti.com
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
2024-02-19 09:56:39 +05:30
Christoph Hellwig
49c379d3a7 xfs: use kvfree for buf in xfs_ioc_getbmap
Without this the kernel crashes in kfree for files with a sufficiently
large number of extents.

Fixes: d4c75a1b40 ("xfs: convert remaining kmem_free() to kfree()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
2024-02-19 09:47:31 +05:30
Martin Blumenstingl
9256cec7b4 clocksource/drivers/arm_global_timer: Remove stray tab
Remove a stray tab in global_timer_of_register() which is different from
the coding style in the rest of the driver.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240218174138.1942418-3-martin.blumenstingl@googlemail.com
2024-02-19 00:48:54 +01:00
Martin Blumenstingl
b34b9547ce clocksource/drivers/arm_global_timer: Fix maximum prescaler value
The prescaler in the "Global Timer Control Register bit assignments" is
documented to use bits [15:8], which means that the maximum prescaler
register value is 0xff.

Fixes: 171b45a4a7 ("clocksource/drivers/arm_global_timer: Implement rate compensation whenever source clock changes")
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240218174138.1942418-2-martin.blumenstingl@googlemail.com
2024-02-19 00:48:54 +01:00
Dylan Hung
10201396ef i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling
Disable IBI IRQ signal and status only when hot-join and SIR enabling of
all target devices attached to the bus are disabled.

Fixes: e389b1d72a ("i3c: dw: Add support for in-band interrupts")

Signed-off-by: Dylan Hung <dylan_hung@aspeedtech.com>
Link: https://lore.kernel.org/r/20240119054547.983693-1-dylan_hung@aspeedtech.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-02-19 00:32:34 +01:00
Krzysztof Kozlowski
cb0a395578 dt-bindings: i3c: drop "master" node name suffix
Drop the requirement of "-master" suffix in node names because:
1. "Master" word is discouraged and MIPI Alliance renamed it to
   "Controller".
2. Some devices can operate in Controller (Master) or Target mode, thus
   the name is not accurate in such cases.
3. Other buses, like I2C controllers, use simple "i2c".

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Jeremy Kerr <jk@codeconstruct.com.au>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240117075618.81932-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
2024-02-18 23:58:08 +01:00
Linus Torvalds
b401b62175 Linux 6.8-rc5 v6.8-rc5 2024-02-18 12:56:25 -08:00
Dirk Behme
e3c3d34507 docs: rust: Add description of Rust documentation test as KUnit ones
Rust documentation tests are automatically converted into KUnit
tests. The commit adding this feature

commit a66d733da8 ("rust: support running Rust documentation tests as KUnit ones")

from Miguel has a very nice commit message with a lot details
for this. To not 'hide' that just in a commit message, pick the main
parts of it and add it to the documentation. And add a short info
how to enable this. While adding this, improve the structure of
the sections.

Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Co-developed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20240130075117.4137360-2-dirk.behme@de.bosch.com
[ Fixed unordered list rendering, rewrapped text and made headers
  consistent with the other documents in `rust/`. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Dirk Behme
ba4abeb13d docs: rust: Move testing to a separate page
To be able to add more testing documentation move the testing
section to it's own page.

No change on the documentation itself.

Suggested-by: Trevor Gross <tmgross@umich.edu>
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: David Gow <davidgow@google.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Link: https://lore.kernel.org/r/20240130075117.4137360-1-dirk.behme@de.bosch.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Alice Ryhl
44f2e626cb rust: kernel: stop using ptr_metadata feature
The `byte_sub` method was stabilized in Rust 1.75.0. By using that
method, we no longer need the unstable `ptr_metadata` feature for
implementing `Arc::from_raw`.

This brings us one step closer towards not using unstable compiler
features.

Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240215104601.1267763-1-aliceryhl@google.com
[ Reworded title. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Alice Ryhl
e283ee2392 rust: kernel: add reexports for macros
Currently, all macros are reexported with #[macro_export] only, which
means that to access `new_work!` from the workqueue, you need to import
it from the path `kernel::new_work` instead of importing it from the
workqueue module like all other items in the workqueue. By adding
reexports of the macros, it becomes possible to import the macros from
the correct modules.

It's still possible to import the macros from the root, but I don't
think we can do anything about that.

There is no functional change. This is merely a code cleanliness
improvement.

Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Tested-by: Boqun Feng <boqun.feng@gmail.com>
Link: https://lore.kernel.org/r/20240129145837.1419880-1-aliceryhl@google.com
[ Removed new `use kernel::prelude::*`s, reworded title. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
ed6d0bed34 rust: locked_by: shorten doclink preview
Increases readability by removing `super::` from the link preview
text.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-12-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
cd16c41fde rust: kernel: remove unneeded doclink targets
Remove explicit targets for doclinks in cases where rustdoc can
determine the correct target by itself. The goal is to reduce unneeded
verbosity in the source code.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-11-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
4c799d1dc8 rust: kernel: add doclinks
Add doclinks to existing documentation.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-10-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
6269fadf35 rust: kernel: add blank lines in front of code blocks
Throughout the code base, blank lines are used before starting a code
block. Adapt outliers to improve consistency within the kernel crate.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-9-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
af8b18d740 rust: kernel: mark code fragments in docs with backticks
Fix places where comments include code fragments that are not enclosed
in backticks.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-8-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
ebf2b8a75a rust: kernel: unify spelling of refcount in docs
Replace instances of 'ref-count[ed]' with 'refcount[ed]' to increase
consistency within the Rust documentation. The latter form is used more
widely in the rest of the kernel:

```console
$ rg '(\*|//).*?\srefcount(|ed)[\s,.]' | wc -l
1605
$ rg '(\*|//).*?\sref-count(|ed)[\s,.]' | wc -l
43
```

(numbers are for commit 052d534373 ("Merge tag 'exfat-for-6.8-rc1'
of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat"))

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-7-0c8af94ed7de@valentinobst.de
[ Reworded to use the kernel's commit description style. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
4c62348d5b rust: str: move SAFETY comment in front of unsafe block
SAFETY comments should immediately precede the unsafe block they
justify. Move assignment to `bar` past comment as it is safe.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-6-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
8cfce47d75 rust: str: use NUL instead of 0 in doc comments
Throughout the module, bytes with the value zero are referred to as
`NUL` bytes. Adapt the only two outliers.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-5-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
ed8596532a rust: kernel: add srctree-relative doclinks
Convert existing references to C header files to make use of
Commit bc2e7d5c29 ("rust: support `srctree`-relative links").

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-4-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
16dca5d12e rust: ioctl: end top-level module docs with full stop
Every other module ends its first line of documentation with a full
stop. Adapt the only outlier.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-3-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
69d5fbb015 rust: error: improve unsafe code in example
The `from_err_ptr` function is safe. There is no need for the call to it
to be inside the unsafe block.

Reword the SAFETY comment to provide a better justification of why the
FFI call is safe.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-2-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Valentin Obst
b6cda913bb rust: kernel: fix multiple typos in documentation
Fixes multiple trivial typos in documentation and comments of the
kernel crate.

allocator:
- Fix a trivial list item alignment issue in the last SAFETY comment of
  `krealloc_aligned`.

init:
- Replace 'type' with 'trait' in the doc comments of the `PinInit` and
  `Init` traits.
- Add colons before starting lists.
- Add spaces between the type and equal sign to respect the code
  formatting rules in example code.
- End a sentence with a full stop instead of a colon.

ioctl:
- Replace 'an' with 'a' where appropriate.

str:
- Replace 'Return' with 'Returns' in the doc comment of `bytes_written`
  as the text describes what the function does.

sync/lock:
- Fix a trivial list item alignment issue in the Safety section of the
  `Backend` trait's description.

sync/lock/spinlock:
- The code in this module operates on spinlocks, not mutexes. Thus,
  replace 'mutex' with 'spinlock' in the SAFETY comment of `unlock`.

workqueue:
- Replace "wont" with "won't" in the doc comment of `__enqueue`.

Signed-off-by: Valentin Obst <kernel@valentinobst.de>
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240131-doc-fixes-v3-v3-1-0c8af94ed7de@valentinobst.de
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:22:27 +01:00
Mika Westerberg
789809a3d5 rust: bindings: Order headers alphabetically
As the comment on top of the file suggests, sort the headers
alphabetically.

No functional changes.

Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://github.com/Rust-for-Linux/linux/issues/1002
Link: https://lore.kernel.org/r/20240216152723.993445-1-mika.westerberg@linux.intel.com
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-02-18 21:21:48 +01:00
Kamal Heib
78e886ba2b net: ena: Remove ena_select_queue
Avoid the following warnings by removing the ena_select_queue() function
and rely on the net core to do the queue selection, The issue happen
when an skb received from an interface with more queues than ena is
forwarded to the ena interface.

[ 1176.159959] eth0 selects TX queue 11, but real number of TX queues is 8
[ 1176.863976] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1180.767877] eth0 selects TX queue 14, but real number of TX queues is 8
[ 1188.703742] eth0 selects TX queue 14, but real number of TX queues is 8

Fixes: 1738cd3ed3 ("net: ena: Add a driver for Amazon Elastic Network Adapters (ENA)")
Signed-off-by: Kamal Heib <kheib@redhat.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-02-18 19:47:45 +00:00
Dawei Li
d0fc93f462 misc: eeprom/idt_89hpesx: Convert data structures to LE explicitly
Kernel test robot reports following sparse warnings:
>> drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse: sparse:
   incorrect type in assignment (different base types) @@
   expected unsigned short [addressable] [assigned] [usertype]
   memaddr @@     got restricted __le16 [usertype] @@

   drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse:
   expected unsigned short [addressable] [assigned] [usertype]
   memaddr

   drivers/misc/eeprom/idt_89hpesx.c:599:31: sparse:
   restricted __le16 [usertype]

   .....

For data structures needs cpu_to_le* conversion, their prototype need
to be declared with __le* explicitly.

Declare data structures to __le* explicitly to address the issue:
- struct idt_eeprom_seq::memaddr
- struct idt_csr_seq::csraddr
- struct idt_csr_seq::data

Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401261250.b07Yt30Z-lkp@intel.com/
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240131033028.3099156-1-dawei.li@shingroup.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-18 19:17:21 +01:00
Colin Ian King
57a9e5053c comedi: remove redundant assignment to variable range
The variable range is being initialized with a value that is never
read, it is being re-assigned later on. The initialization is
redundant and can be removed.

Cleans up clang scan build warning:
drivers/comedi/drivers/das08.c:180:2: warning: Value stored
to 'range' is never read [deadcode.DeadStores]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Link: https://lore.kernel.org/r/20240205180436.1841706-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-02-18 19:17:11 +01:00
Linus Torvalds
6c160f16be Kbuild fixes for v6.8 (2nd)
- Reformat nested if-conditionals in Makefiles with 4 spaces
 
  - Fix CONFIG_DEBUG_INFO_BTF builds for big endian
 
  - Fix modpost for module srcversion
 
  - Fix an escape sequence warning in gen_compile_commands.py
 
  - Fix kallsyms to ignore ARMv4 thunk symbols
 -----BEGIN PGP SIGNATURE-----
 
 iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmXSPDIVHG1hc2FoaXJv
 eUBrZXJuZWwub3JnAAoJED2LAQed4NsGRbEP/3oiRjevkrWG32cVy8ozNLZFZ87u
 tGDs3NNnV0XyQ5ymkRPVmSoahndatcg4/zI1PQ5/l0ryhqvF4egSHMZZ1zwGwtOz
 pj+VhT4525U+jjlYTX760VLBeOkzGB7Rmpr3zihy5Amg0TTiqDU0OKWDrKZrMLEw
 O9HGDJ0GlmEtVCcQ0yZg4bzfsRmgykZzGbc0p2OijUE321q5Svzezr0RpW3nXQwL
 MlsHLtFEas35wzK4JN2s8MDQ4x4bqG8wI4fikXA/gioMA+PMFKZNqcw/BuUey+Qz
 r8HwSFkftqbOtjWzn6FtisLzUfdcT/ycDZnWTGb4qbHt19YETXVpg0fKVZktnSzv
 h/0vvgwBP1r5h4J9N0GGURRV0Cx+LM94uNVgdy9neRtk3f4E0MbGtSe7xZ+7iRUj
 UZ676ul6QYfpaxAS8+/6pilQ7AKQ1Z2qoNPZG5aN44x0YR2qQk7aFc+RH5d1FnMU
 ZYh+0Se9JGlvobWBQiQw9NZ/3GUCBgC/HhHGqrrRnzU9lJCfRsG4kGhrKmgiUgJb
 z2EMZPDKDW58zQ+A9khBZSvqFwVL43oQTyXiFdaWMCFAVAY7pOC2h0e1kBn2Mth4
 qVIO9w5muet7u9ouoEfz7ZfXpDYCBOYwhGvkVG//0Ac71bKq1ZBYvl04P7QuMjxf
 YGihyF43epnMyECK
 =hE/P
 -----END PGP SIGNATURE-----

Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Reformat nested if-conditionals in Makefiles with 4 spaces

 - Fix CONFIG_DEBUG_INFO_BTF builds for big endian

 - Fix modpost for module srcversion

 - Fix an escape sequence warning in gen_compile_commands.py

 - Fix kallsyms to ignore ARMv4 thunk symbols

* tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kallsyms: ignore ARMv4 thunks along with others
  modpost: trim leading spaces when processing source files list
  gen_compile_commands: fix invalid escape sequence warning
  kbuild: Fix changing ELF file type for output of gen_btf for big endian
  docs: kconfig: Fix grammar and formatting
  kbuild: use 4-space indentation when followed by conditionals
2024-02-18 10:09:25 -08:00