Get rid of gfp parameter from ieee80211_obss_color_collision_notify
since it is no longer used.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Link: https://msgid.link/f91e1c78896408ac556586ba8c99e4e389aeba02.1707389901.git.lorenzo@kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Convert path separator to CIFS_DIR_SEP(cifs_sb) from symlink target
before sending it over the wire otherwise the created SMB symlink may
become innaccesible from server side.
Fixes: 514d793e27 ("smb: client: allow creating symlinks via reparse points")
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When uid, gid and cruid are not specified, we need to dynamically
set them into the filesystem context used for automounting otherwise
they'll end up reusing the values from the parent mount.
Fixes: 9fd29a5bae ("cifs: use fs_context for automounts")
Reported-by: Shane Nehring <snehring@iastate.edu>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2259257
Cc: stable@vger.kernel.org # 6.2+
Signed-off-by: Paulo Alcantara (Red Hat) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
I started getting warnings for this one file, though I can't see what changed
since it was originally introduced in commit fec7b66905 ("samples: add an
example of seccomp user trap").
samples/seccomp/user-trap.c: In function 'send_fd':
samples/seccomp/user-trap.c:50:11: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
50 | *((int *)CMSG_DATA(cmsg)) = fd;
| ~^~~~~~~~~~~~~~~~~~~~~~~
samples/seccomp/user-trap.c: In function 'recv_fd':
samples/seccomp/user-trap.c:83:18: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
83 | return *((int *)CMSG_DATA(cmsg));
| ~^~~~~~~~~~~~~~~~~~~~~~~
Using a temporary pointer variable avoids the warning.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240212111737.917428-1-arnd@kernel.org
Acked-by: Tycho Andersen <tandersen@netflix.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
During devlink reload it is needed to remove debugfs entries
correlated with only one PF. ice_debugfs_exit() removes all
entries created by ice driver so we can't use it.
Introduce ice_debugfs_pf_deinit() in order to release PF's
debugfs entries. Move ice_debugfs_exit() call to ice_module_exit(),
it makes more sense since ice_debugfs_init() is called in
ice_module_init() and not in ice_probe().
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Recent changes to the devlink reload (commit 9b2348e2d6
("devlink: warn about existing entities during reload-reinit"))
force the drivers to destroy devlink ports during reinit.
Adjust ice driver to this requirement, unregister netdvice, destroy
devlink port. ice_init_eth() was removed and all the common code
between probe and reload was moved to ice_load().
During devlink reload we can't take devl_lock (it's already taken)
and in ice_probe() we have to lock it. Use devl_* variant of the API
which does not acquire and release devl_lock. Guard ice_load()
with devl_lock only in case of probe.
Suggested-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Signed-off-by: Wojciech Drewek <wojciech.drewek@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
E825C devices shall support the new signing type of RSA 3K for new DDP
section (SEGMENT_SIGN_TYPE_RSA3K_E825 (5) - already in the code).
The driver is responsible to verify the presence of correct signing type.
Add 3k signinig support for E825C devices based on mac_type:
ICE_MAC_GENERIC_3K_E825;
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
E800 series devices have a couple of quirks:
1. Sideband control queues are not supported
2. The registers that the driver needs to program for the "Precision
Time Protocol (PTP)" feature are different for E800 series devices
compared to other devices supported by this driver.
Both these require conditional logic based on the underlying device we
are dealing with.
The function ice_is_sbq_supported added by commit 8f5ee3c477
("ice: add support for sideband messages") addresses (1).
The same function can be used to address (2) as well
but this just looks weird readability wise in cases that have nothing
to do with sideband control queues:
if (ice_is_sbq_supported(hw))
/* program register A */
else
/* program register B */
For these cases, the function ice_is_generic_mac introduced by this
patch communicates the idea/intention better. Also rework
ice_is_sbq_supported to use this new function.
As side-band queue is supported for E825C devices, it's mac_type is
considered as generic mac_type.
Co-developed-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Introduce new Intel Ethernet E825C family devices.
Add new PCI device IDs which are going to be supported by the
driver:
- 579C: Intel(R) Ethernet Connection E825-C for backplane
- 579D: Intel(R) Ethernet Connection E825-C for QSFP
- 579E: Intel(R) Ethernet Connection E825-C for SFP
- 579F: Intel(R) Ethernet Connection E825-C for SGMII
Add helper function ice_is_e825c() to verify if the running device
belongs to E825C family.
Co-developed-by: Jan Glaza <jan.glaza@intel.com>
Signed-off-by: Jan Glaza <jan.glaza@intel.com>
Co-developed-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Michal Michalik <michal.michalik@intel.com>
Signed-off-by: Grzegorz Nitka <grzegorz.nitka@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Inside IVSC, switching ownership requires an interface with two
different hardware modules, ACE and CSI. The software interface
to these modules is based on Intel MEI framework. Usually mei
client devices are dynamically created, so the info of consumers
depending on mei client devices is not present in the firmware
tables.
This causes problems with the probe ordering with respect to
drivers for consumers of these MEI client devices. But on these
camera sensor devices, the ACPI nodes describing the sensors all
have a _DEP dependency on the matching MEI bus ACPI device, so
adding IVSC MEI bus ACPI device to acpi_honor_dep_ids allows
solving the probe-ordering problem by deferring the enumeration of
ACPI-devices which have a _DEP dependency on an IVSC mei bus ACPI
device.
Add INTC10CF, the HID of IVSC MEI bus ACPI device on MTL platform,
to acpi_honor_dep_ids.
Signed-off-by: Wentong Wu <wentong.wu@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the context, 'pci_pm_suspend_noirq' is the right
word for the changed sentence.
Signed-off-by: Yiwei Lin <s921975628@gmail.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
We handle ID_AA64MMFR4_EL1.E2H0 being 0 as NV1 being present.
However, this is only true if FEAT_NV is implemented.
Add the required check to has_nv1(), avoiding spuriously advertising
NV1 on HW that doesn't have NV at all.
Fixes: da9af5071b ("arm64: cpufeature: Detect HCR_EL2.NV1 being RES0")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240212144736.1933112-3-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
When triggering a CPU hotplug scenario, we reparse the CPU feature
with SCOPE_LOCAL_CPU, for which we use __read_sysreg_by_encoding()
to get the HW value for this CPU.
As it turns out, we're missing the handling for ID_AA64MMFR4_EL1,
and trigger a BUG(). Funnily enough, Marek isn't completely happy
about that.
Add the damn register to the list.
Fixes: 805bb61f82 ("arm64: cpufeature: Add ID_AA64MMFR4_EL1 handling")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20240212144736.1933112-2-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
CPU temperature can be negative in some cases. Thus the negative CPU
temperature should not be considered as a failure.
Fix intel_tcc_get_temp() and its users to support negative CPU
temperature.
Fixes: a3c1f066e1 ("thermal/intel: Introduce Intel TCC library")
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Reviewed-by: Stanislaw Gruszka <stanislaw.gruszka@linux.intel.com>
Cc: 6.3+ <stable@vger.kernel.org> # 6.3+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2e85d32b1c ("xen/xenbus: Add 'will_handle' callback support in
xenbus_watch_path()") added will_handle argument to xenbus_watch_path()
and its wrapper, xenbus_watch_pathfmt(), but didn't document it on the
kerneldoc comments of the function. This is causing warnings that
reported by kernel test robot. Add the documentation to fix it.
Fixes: 2e85d32b1c ("xen/xenbus: Add 'will_handle' callback support in xenbus_watch_path()")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202401121154.FI8jDGun-lkp@intel.com/
Signed-off-by: SeongJae Park <sj@kernel.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240112185903.83737-1-sj@kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
The file pci.c is very large and contains a number of devres functions.
These functions should now reside in devres.c.
Move as much devres-specific code from pci.c to devres.c as possible.
There are a few callers left in pci.c that do devres operations. These
should be ported in the future. Add corresponding TODOs.
The reason they are not moved right now in this commit is that PCI's devres
currently implements a sort of "hybrid-mode": pci_request_region(), for
instance, does not have a corresponding pcim_ equivalent, yet. Instead, the
function can be made managed by previously calling pcim_enable_device()
(instead of pci_enable_device()). This makes it unreasonable to move
pci_request_region() to devres.c. Moving the functions would require
changes to PCI's API and is, therefore, left for future work.
In summary, this commit serves as a preparation step for a following
patch series that will cleanly separate the PCI's managed and unmanaged
API.
Link: https://lore.kernel.org/r/20240131090023.12331-5-pstanner@redhat.com
Suggested-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The pcim_*() functions in lib/devres.c are guarded by an #ifdef CONFIG_PCI
and, thus, don't belong to this file. They are only ever used for PCI and
are not generic infrastructure.
Move all pcim_*() functions in lib/devres.c to drivers/pci/devres.c.
Adjust the Makefile.
Add drivers/pci/devres.c to Documentation.
Link: https://lore.kernel.org/r/20240131090023.12331-4-pstanner@redhat.com
Suggested-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The entirety of pci_iomap.c is guarded by an #ifdef CONFIG_PCI. It,
consequently, does not belong to lib/ because it is not generic
infrastructure.
Move pci_iomap.c to drivers/pci/ and implement the necessary changes to
Makefiles and Kconfigs.
Update MAINTAINERS file.
Update Documentation.
Link: https://lore.kernel.org/r/20240131090023.12331-3-pstanner@redhat.com
[bhelgaas: squash in https://lore.kernel.org/r/20240212150934.24559-1-pstanner@redhat.com]
Suggested-by: Danilo Krummrich <dakr@redhat.com>
Signed-off-by: Philipp Stanner <pstanner@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
This patch corrects a common misspelling of "request" as "reguest" found
in error log across multiple files within sound/soc/codecs.
Signed-off-by: Yinchuan Guo <guoych37@mail2.sysu.edu.cn>
Link: https://msgid.link/r/20240212144247.43744-1-guoych37@mail2.sysu.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
In this case dev cannot be NULL, so remove redundant check.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 03fd3cf5a1 ("can: add driver for Softing card")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://lore.kernel.org/all/20240211150535.3529-1-d.dulov@aladdin.ru
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Vincent Mailhol <mailhol.vincent@wanadoo.fr> says:
This series is a single patch to replace Wolfgang by myself as the
second maintainer of the CAN drivers subtree.
Link: https://lore.kernel.org/all/20240205111743.920528-1-mailhol.vincent@wanadoo.fr
[mkl: fix typo]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Wolfgang has not been active on the linux-can mailing list other the
last two years, his last activity being on November 2021 [1].
In replacement, I would like to nominate myself (Vincent Mailhol) as
the second maintainer of the CAN drivers subtree.
Wolfgang is already listed in the CREDITS since [2], so despite this
removal, his legacy remains credited.
Thank you for all your contributions!
[1] https://lore.kernel.org/linux-can/?q=f%3AWolfgang+Grandegger
[2] commit 4261a2043f ("can: Update MAINTAINERS and CREDITS file")
Link: https://git.kernel.org/torvalds/c/4261a2043f1b
CC: Marc Kleine-Budde <mkl@pengutronix.de>
CC: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Vincent Mailhol <mailhol.vincent@wanadoo.fr>
Link: https://lore.kernel.org/all/20240205111743.920528-2-mailhol.vincent@wanadoo.fr
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Markus Schneider-Pargmann <msp@baylibre.com> says:
The series implements many small and bigger throughput improvements and
adds rx/tx coalescing at the end.
Changes in v7:
- Rebased to v6.8-rc1
- Fixed NULL pointer dereference in m_can_clean() on am62 that happened
when doing ip link up, ip link down, ip link up
- Fixed a racecondition on am62 observed with high throughput tests.
netdev_completed_queue() was called before netdev_sent_queue() as the
interrupt was processed so fast. netdev_sent_queue() is now reported
before the actual sent is done.
- Fixed an initializing issue on am62 where active interrupts are
getting lost between runs. Fixed by resetting cdev->active_interrupts
in m_can_disable_all_interrupts()
- Removed m_can_start_fast_xmit() because of a reordering of operations
due to above mentioned race condition
Changes in v6:
- Rebased to v6.6-rc2
- Added two small changes for the newly integrated polling feature
- Reuse the polling hrtimer for coalescing as the timer used for
coalescing has a similar purpose as the one for polling. Also polling
and coalescing will never be active at the same time.
Changes in v5:
- Add back parenthesis in m_can_set_coalesce(). This will make
checkpatch unhappy but gcc happy.
- Remove unused fifo_header variable in m_can_tx_handler().
- Rebased to v6.5-rc1
Changes in v4:
- Create and use struct m_can_fifo_element in m_can_tx_handler
- Fix memcpy_and_pad to copy the full buffer
- Fixed a few checkpatch warnings
- Change putidx to be unsigned
- Print hard_xmit error only once when TX FIFO is full
Changes in v3:
- Remove parenthesis in error messages
- Use memcpy_and_pad for buffer copy in 'can: m_can: Write transmit
header and data in one transaction'.
- Replace spin_lock with spin_lock_irqsave. I got a report of a
interrupt that was calling start_xmit just after the netqueue was
woken up before the locked region was exited. spin_lock_irqsave should
fix this. I attached the full stack at the end of the mail if someone
wants to know.
- Rebased to v6.3-rc1.
- Removed tcan4x5x patches from this series.
Changes in v2:
- Rebased on v6.2-rc5
- Fixed missing/broken accounting for non peripheral m_can devices.
previous versions:
v1 - https://lore.kernel.org/lkml/20221221152537.751564-1-msp@baylibre.com
v2 - https://lore.kernel.org/lkml/20230125195059.630377-1-msp@baylibre.com
v3 - https://lore.kernel.org/lkml/20230315110546.2518305-1-msp@baylibre.com
v4 - https://lore.kernel.org/lkml/20230621092350.3130866-1-msp@baylibre.com
v5 - https://lore.kernel.org/lkml/20230718075708.958094-1-msp@baylibre.com
v6 - https://lore.kernel.org/lkml/20230929141304.3934380-1-msp@baylibre.com
Link: https://lore.kernel.org/all/20240207093220.2681425-1-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In detail:
In C language, when you perform a multiplication operation, if
both operands are of int type, the multiplication operation is
performed on the int type, and then the result is converted to
the target type. This means that if the product of int type
multiplication exceeds the range that int type can represent,
an overflow will occur even if you store the result in a
variable of int64_t type.
For a multiplication of two int values, it is better to use
mul_u32_u32() rather than s->exit_latency_ns = s->exit_latency *
NSEC_PER_USEC to avoid potential overflow happenning.
Signed-off-by: C Cheng <C.Cheng@mediatek.com>
Signed-off-by: Bo Ye <bo.ye@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For i2c read operation in GSI mode, we are getting timeout
due to malformed TRE basically incorrect TRE sequence
in gpi(drivers/dma/qcom/gpi.c) driver.
I2C driver has geni_i2c_gpi(I2C_WRITE) function which generates GO TRE and
geni_i2c_gpi(I2C_READ)generates DMA TRE. Hence to generate GO TRE before
DMA TRE, we should move geni_i2c_gpi(I2C_WRITE) before
geni_i2c_gpi(I2C_READ) inside the I2C GSI mode transfer function
i.e. geni_i2c_gpi_xfer().
TRE stands for Transfer Ring Element - which is basically an element with
size of 4 words. It contains all information like slave address,
clk divider, dma address value data size etc).
Mainly we have 3 TREs(Config, GO and DMA tre).
- CONFIG TRE : consists of internal register configuration which is
required before start of the transfer.
- DMA TRE : contains DDR/Memory address, called as DMA descriptor.
- GO TRE : contains Transfer directions, slave ID, Delay flags, Length
of the transfer.
I2c driver calls GPI driver API to config each TRE depending on the
protocol.
For read operation tre sequence will be as below which is not aligned
to hardware programming guide.
- CONFIG tre
- DMA tre
- GO tre
As per Qualcomm's internal Hardware Programming Guide, we should configure
TREs in below sequence for any RX only transfer.
- CONFIG tre
- GO tre
- DMA tre
Fixes: d8703554f4 ("i2c: qcom-geni: Add support for GPI DMA")
Reviewed-by: Andi Shyti <andi.shyti@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org> # qrb5165-rb5
Co-developed-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Mukesh Kumar Savaliya <quic_msavaliy@quicinc.com>
Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Andi Shyti <andi.shyti@kernel.org>
Like many other models, the Lenovo 82UU (Yoga Slim 7 Pro 14ARH7)
needs a quirk entry for the internal microphone to function.
Signed-off-by: Attila Tőkés <attitokes@gmail.com>
Link: https://msgid.link/r/20240210193638.144028-1-attitokes@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
m_can supports submitting multiple transmits with one register write.
This is an interesting option to reduce the number of SPI transfers for
peripheral chips.
The m_can_tx_op is extended with a bool that signals if it is the last
transmission and the submit should be executed immediately.
The worker then writes the skb to the FIFO and submits it only if the
submit bool is set. If it isn't set, the worker will write the next skb
which is waiting in the workqueue to the FIFO, etc.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-15-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The network queue is currently always stopped in start_xmit and
continued in the interrupt handler. This is not possible anymore if we
want to keep multiple transmits in flight in parallel.
Use the previously introduced tx_fifo_in_flight counter to control the
network queue instead. This has the benefit of not needing to ask the
hardware about fifo status.
This patch stops the network queue in start_xmit if the number of
transmits in flight reaches the size of the fifo and wakes up the queue
from the interrupt handler once the transmits in flight drops below the
fifo size. This means any skbs over the limit will be rejected
immediately in start_xmit (it shouldn't be possible at all to reach that
state anyways).
The maximum number of transmits in flight is the size of the fifo.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-13-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Keep track of the number of transmits in flight.
This patch prepares the driver to control the network interface queue
based on this counter. By itself this counter be
implemented with an atomic, but as we need to do other things in the
critical sections later I am using a spinlock instead.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-12-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The current implementation uses the workqueue for peripheral chips to
submit work. Only a single work item is queued and used at any time.
To be able to keep more than one transmit in flight at a time, prepare
the workqueue to support multiple transmits at the same time.
Each work item now has a separate storage for a skb and a pointer to
cdev. This assures that each workitem can be processed individually.
The workqueue is replaced by an ordered workqueue which makes sure that
only a single worker processes the items queued on the workqueue. Also
items are ordered by the order they were enqueued. This removes most of
the concurrency the workqueue normally offers. It is not necessary for
this driver.
The cleanup functions have to be adopted a bit to handle this new
mechanism.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-11-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
m_can_tx_handler is the only place where data is written to the tx fifo.
We can calculate the putidx in the driver code here to avoid the
dependency on the txfqs register.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-10-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
putidx is not an integer normally, it is an unsigned field used in
hardware registers. Use a u32 for it.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-9-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add TX support to get/set functions for ethtool coalescing.
tx-frames-irq and tx-usecs-irq can only be set/unset together.
tx-frames-irq needs to be less than TXE and TXB.
As rx and tx share the same timer, rx-usecs-irq and tx-usecs-irq can be
enabled/disabled individually but they need to have the same value if
enabled.
Polling is excluded from TX irq coalescing.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-8-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add the possibility to set coalescing parameters with ethtool.
rx-frames-irq and rx-usecs-irq can only be set and unset together as the
implemented mechanism would not work otherwise. rx-frames-irq can't be
greater than the RX FIFO size.
Also all values can only be changed if the chip is not active.
Polling is excluded from irq coalescing support.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-7-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Extend the coalescing implementation for transmits.
In normal mode the chip raises an interrupt for every finished transmit.
This implementation switches to coalescing mode as soon as an interrupt
handled a transmit. For coalescing the watermark level interrupt is used
to interrupt exactly after x frames were sent. It switches back into
normal mode once there was an interrupt with no finished transmit and
the timer being inactive.
The timer is shared with receive coalescing. The time for receive and
transmit coalescing timers have to be the same for that to work. The
benefit is to have only a single running timer.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-6-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
m_can offers the possibility to set an interrupt on reaching a watermark
level in the receive FIFO. This can be used to implement coalescing.
Unfortunately there is no hardware timeout available to trigger an
interrupt if only a few messages were received within a given time. To
solve this I am using a hrtimer to wake up the irq thread after x
microseconds.
The timer is always started if receive coalescing is enabled and new
received frames were available during an interrupt. The timer is stopped
if during a interrupt handling no new data was available.
If the timer is started the new item interrupt is disabled and the
watermark interrupt takes over. If the timer is not started again, the
new item interrupt is enabled again, notifying the handler about every
new item received.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-5-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Combine header and data before writing to the transmit fifo to reduce
the overhead for peripheral chips.
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/all/20240207093220.2681425-4-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
The hrtimer_init() is called in m_can_plat_probe() and the hrtimer
function is set in m_can_class_register(). For readability it is better
to keep these two together in m_can_class_register().
Cc: Judith Mendez <jm@ti.com>
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-3-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Interrupts are enabled/disabled in more places than just m_can_start()
and m_can_stop(). Couple the polling timer with enabling/disabling of
all interrupts to achieve equivalent behavior.
Cc: Judith Mendez <jm@ti.com>
Fixes: b382380c0d ("can: m_can: Add hrtimer to generate software interrupt")
Signed-off-by: Markus Schneider-Pargmann <msp@baylibre.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/all/20240207093220.2681425-2-msp@baylibre.com
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Stefan Mätje <stefan.maetje@esd.eu> says:
The purpose of this patch is to introduce a new CAN driver to support
the esd GmbH 402 family of CAN interface boards. The hardware design
is based on a CAN controller implemented in a FPGA attached to a
PCIe link.
More information on these boards can be found following the links
included in the commit message.
This patch supports all boards but will operate the CAN-FD capable
boards only in Classic-CAN mode. The CAN-FD support will be added
when the initial patch has stabilized.
The patch is reuses the previous work of my former colleague:
Link: https://lore.kernel.org/linux-can/1426592308-23817-1-git-send-email-thomas.koerper@esd.eu
The patch is based on the linux-can-next main branch.
Changed in v11:
No functional, only editorial changes due to feedback on v10.
- Make lifetime of macros used for hardware timestamp calculation
very short by #undef-ing them after use.
- Fixed insertion order of new entry in MAINTAINERS file.
Changed in v10:
Most changes due to feedback by Vincent Mailhol
https://lore.kernel.org/linux-can/CAMZ6RqLOAC930GNOU+pWuoi6FgYwFOuFrSyAzVjvE2fuVgy8oA@mail.gmail.com
- Add support for ethtool operations by using default operations
provided by the can_dev module for drivers with hardware time
stamp support.
- Factor out core unregistration into pci402_unregister_core().
- Factor out getting next TX fifo index into acc_tx_fifo_next().
- Stop counting alloc_can_err_skb() failures in rx_dropped statistic.
- Add CAN_ERR_CNT flag in CAN error frames as needed.
- Rework function acc_reset_fpga(). To clear I^2C bus enable bit
is not necessary after FPGA reset.
- Simplify struct acc_bmmsg_rxtxdone layout.
- Additional non functional changes due to feedback by Vincent
- Some spelling corrections: ESDACC -> esdACC
Changes in v9:
- Fix returning success error code in case of allocation failure in
pci402_probe().
Changes in v8:
- Rebased to 6.6-rc2 on linux-can-next branch main
Changes in v7:
- Numerous changes. Find the quoted with inline comments about changes
below after the changes list. Stuff that I don't understand and
where I have questions is marked with ????.
Unfortunately I will be AFK till 28th of November.
Changes in v6:
- Fixed the statistic handling of RX overrun errors and increase
net_device_stats::rx_errors instead of net_device_stats::rx_dropped.
- Added a patch to not increase rx statistics when generating a CAN
rx error message frame as suggested on the linux-can list.
- Added a patch to not not increase rx_bytes statistics for RTR frames
as suggested on the linux-can list.
The last two patches change the statistics handling from the previous
style used in other drivers to the newly suggested one.
Changes in v5:
- Added the initialization for netdev::dev_port as it is implemented
for another CAN driver. See
https://lore.kernel.org/linux-can/20211026180553.1953189-1-mailhol.vincent@wanadoo.fr
Changes in v4:
- Fixed the build failure on ARCH=arm64 that was found by the Intel
kernel test robot. See
https://lore.kernel.org/linux-can/202109120608.7ZbQXkRh-lkp@intel.com
Removed error monitoring code that used GCC's built-in compiler
functions for atomic access (__sync_* functions). GCC versions
after 9 (tested with "gcc-10 (Ubuntu 10.3.0-1ubuntu1~20.04)")
don't implement the intrinsic atomic as in-line code but call
"__aarch64_ldadd4_acq_rel" on arm64. This GCC support function
is not exported by the kernel and therefore the module build
post-processing fails.
Removed that code because the error monitoring never showed a
problem during the development this year.
Changes in v3:
- Rework the bus-off restart logic in acc_set_mode() and
handle_core_msg_errstatechange() to call netif_wake_queue() from the
error active event.
- Changed pci402_init_card() to allocate a variable sized array of
struct acc_core using devm_kcalloc() instead of using a fixed size
array in struct pci402_card.
- Changed handle_core_msg_txabort() to release aborted TX frames in
TX FIFO order.
- Fixed the acc_close() function to abort all pending TX request in
esdACC controller.
- Fixed counting of transmit aborts in handle_core_msg_txabort().
It is now done like in can_flush_echo_skb().
- Fixed handle_core_msg_buserr() to create error frames including the
CAN RX and TX error counters that were missing.
- Fixed acc_set_bittiming() neither to touch LOM mode setting of
esdACC controller nor to enter or leave RESET mode.
The esdACC controller is going active on the CAN bus in acc_open()
and is going inactive (RESET mode) again in acc_close().
- Rely on the automatic release of memory fetched by devm_kzalloc().
But still use devm_irq_free() explicitely to make sure that the
interrupt handler is disconnected at that point.
This avoids a possible crash in non-MSI mode due to the IRQ
triggered by another device on the same PCI IRQ line.
- Changed to use DMA map API instead of pci_*_consistent compatibility
wrappers.
- Fixed stale email references and updated copyright information.
- Removed any traces of future CAN-FD support.
Changes in v2:
- Avoid warning triggered by -Wshift-count-overflow on architectures
with 32-bit dma_addr_t.
- Fixed Makefile not to build the kernel module always. Doing this
renamed esd402_pci.c to esd_402_pci-core.c as recommended by Marc.
previous versions:
v1 - https://lore.kernel.org/linux-can/20210728203647.15240-1-Stefan.Maetje@esd.eu
v2 - https://lore.kernel.org/linux-can/20210730173805.3926-1-Stefan.Maetje@esd.eu
v3 - https://lore.kernel.org/linux-can/20210908164640.23243-1-stefan.maetje@esd.eu
v4 - https://lore.kernel.org/linux-can/20210916172152.5127-1-stefan.maetje@esd.eu
v5 - https://lore.kernel.org/linux-can/20211109155326.2608822-1-stefan.maetje@esd.eu
v6 - https://lore.kernel.org/linux-can/20211201220328.3079270-1-stefan.maetje@esd.eu
v7 - https://lore.kernel.org/linux-can/20221106224156.3619334-1-stefan.maetje@esd.eu
v8 - https://lore.kernel.org/linux-can/20231025141635.1459606-1-stefan.maetje@esd.eu
v9 - https://lore.kernel.org/linux-can/20231107184103.2802678-1-stefan.maetje@esd.eu
v10 - https://lore.kernel.org/linux-can/20231120175657.4070921-1-stefan.maetje@esd.eu
Link: https://lore.kernel.org/all/20231122160211.2110448-1-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds support for the PCI based PCIe/402 CAN interface family
from esd GmbH that is available with various form factors
(https://esd.eu/en/products/402-series-can-interfaces).
All boards utilize a FPGA based CAN controller solution developed
by esd (esdACC). For more information on the esdACC see
https://esd.eu/en/products/esdacc.
This driver detects all available CAN interface board variants of
the family but atm. operates the CAN-FD capable devices in
Classic-CAN mode only! A later patch will introduce the CAN-FD
functionality in this driver.
Co-developed-by: Thomas Körper <thomas.koerper@esd.eu>
Signed-off-by: Thomas Körper <thomas.koerper@esd.eu>
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://lore.kernel.org/all/20231122160211.2110448-3-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Adding myself (Stefan Mätje) as a maintainer for the upcoming driver of
the PCIe/402 interface card family.
Signed-off-by: Stefan Mätje <stefan.maetje@esd.eu>
Link: https://lore.kernel.org/all/20231122160211.2110448-2-stefan.maetje@esd.eu
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Add __pm_runtime_put_autosuspend() that replaces
pm_runtime_put_autosuspend() for new users. The intent is to later
re-purpose pm_runtime_put_autosuspend() to also mark the device's last
busy stamp---which is what the vast majority of users actually need.
This is also described in pm_runtime_put_autosuspend() documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
There are two ways to opportunistically increment a device's runtime PM
usage count, calling either pm_runtime_get_if_active() or
pm_runtime_get_if_in_use(). The former has an argument to tell whether to
ignore the usage count or not, and the latter simply calls the former with
ign_usage_count set to false. The other users that want to ignore the
usage_count will have to explicitly set that argument to true which is a
bit cumbersome.
To make this function more practical to use, remove the ign_usage_count
argument from the function. The main implementation is in a static
function called pm_runtime_get_conditional() and implementations of
pm_runtime_get_if_active() and pm_runtime_get_if_in_use() are moved to
runtime.c.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Alex Elder <elder@linaro.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Takashi Iwai <tiwai@suse.de> # sound/
Reviewed-by: Jacek Lawrynowicz <jacek.lawrynowicz@linux.intel.com> # drivers/accel/ivpu/
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> # drivers/gpu/drm/i915/
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Bjorn Helgaas <bhelgaas@google.com> # drivers/pci/
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>