When MES is enabled KIQ is not available. Return an error
when someone uses the debugfs preempt test interface in
that case.
Acked-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
DCN IPS interoperates with other system idle power features, such as
Zstates.
On DCN35, there is a known issue where system Z8 + DCN IPS2 causes a
hard hang. We observe this on systems where the SBIOS allows Z8.
Though there is a SBIOS fix, there's no guarantee that users will get it
any time soon, or even install it. A workaround is needed to prevent
this from rearing its head in the wild.
[How]
For DCN35, check the pmfw version to determine whether the SBIOS has the
fix. If not, set IPS1+RCG as the deepest possible state in all cases
except for s0ix and display off (DPMS). Otherwise, enable all IPS
Signed-off-by: Leo Li <sunpeng.li@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
log message "Dumping IP State Completed" needs to
be logged only once when state dumping is complete.
Hence moving it out of the for loop.
Signed-off-by: Sunil Khatri <sunil.khatri@amd.com>
Acked-by: Trigger Huang <Trigger.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[background] when unloading amdgpu driver right after running a
workload, drain_workqueue is causing "Fence fallback timer
expired on ring sdma0.0". Under sriov, this issue will cause sriov
full access timeout and a reset happening.
move drain_workqueue before shutdown is set to allow ih process and
before enter full access under sriov to avoid full access time cost.
Signed-off-by: Victor Zhao <Victor.Zhao@amd.com>
Reviewed-by: Feifei Xu <Feifei.Xu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Do the coredump immediately after a job timeout to get a closer
representation of GPU's error status.
V2: This will skip printing vram_lost as the GPU reset is not
happened yet (Alex)
V3: Unconditionally call the core dump as we care about all the reset
functions(soft-recovery and queue reset and full adapter reset, Alex)
V4: Do the dump after adev->job_hang = true (Sunil)
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Acked-by: Sunil Khatri <sunil.khatri@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The vm lost status can only be obtained after a GPU reset occurs, but
sometimes a dev core dump can be happened before GPU reset. So a new
argument is added to tell the dev core dump implementation whether to
skip printing the vram_lost status in the dump.
And this patch is also trying to decouple the core dump function from
the GPU reset function, by replacing the argument amdgpu_reset_context
with amdgpu_job to specify the context for core dump.
V2: Inform user if VRAM lost check is skipped so users don't assume
VRAM wasn't lost (Alex)
Signed-off-by: Trigger Huang <Trigger.Huang@amd.com>
Suggested-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add this flag to enable experimental resets for testing before they
are fully validated.
Reviewed-and-tested-by: Jiadong Zhu <Jiadong.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
It is to fix in try_disable_dsc() due to misrevert of
commit 338567d176 ("drm/amd/display: Fix MST BW calculation Regression")
[How]
Fix restoring minimum compression bw by 'max_kbps', instead of native bw 'stream_kbps'
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This is useful for debug, in case something goes wrong with the GSC. The
info includes the version information and the current value of the HECI1
status registers.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-5-daniele.ceraolospurio@intel.com
The GSC compatibility version number is reset for each new platform. To
indicate this, the version includes a number that identifies the
platform (102 = MTL, 104 = LNL); this matches what happens for the
release version, where the major number also identifies a platform.
To make it clearer in our logs that the compatibility version is
specific to the platform, it is useful to include this platform number.
However, given that our binary names already include the platform, it is
not necessary to add this extra number there.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-4-daniele.ceraolospurio@intel.com
We set the FW status to "TRANSFERRED" after the load completes and to
"RUNNING"once we're done with proxy init, so do the same if we're trying
to re-load the FW and it is already loaded.
Note that there is no difference in driver behavior between the 2
states, but it's useful to be accurate when we dump the status for
debug.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-3-daniele.ceraolospurio@intel.com
The GSC HW is only reset by driver FLR or D3cold entry. We don't support
the former at runtime, while the latter is only supported on DGFX, for
which we don't support GSC. Therefore, if GSC failed to load previously
there is no need to try again because the HW is stuck in the error state.
An assert has been added so that if we ever add DGFX support we'll know
we need to handle the D3 case.
v2: use "< 0" instead of "!= 0" in the FW state error check (Julia).
Fixes: dd0e89e5ed ("drm/xe/gsc: GSC FW load")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240828215158.2743994-2-daniele.ceraolospurio@intel.com
LPC32XX connects few of its peripherals to pl08x DMA thru a multiplexer,
this driver allows to route a signal request line thru the multiplexer for
given peripheral.
Signed-off-by: Piotr Wojtaszczyk <piotr.wojtaszczyk@timesys.com>
Link: https://lore.kernel.org/r/20240628152022.274405-1-piotr.wojtaszczyk@timesys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Check src ID to detect misuse of same src ID for multiple DMA channels.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240701070232.2519179-3-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Introduce a scope guard to automatically unlock the mutex within
fsl_edma3_xlate() to simplify the code.
Prepare to add source ID checks in the future.
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240701070232.2519179-2-joy.zou@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Using an arbitrary string as a printf-style format can be a security
problem if that string contains % characters, as the optionalal
-Wformat-security flag points out:
drivers/dma/dmaengine.c: In function '__dma_async_device_channel_register':
drivers/dma/dmaengine.c:1073:17: error: format not a string literal and no format arguments [-Werror=format-security]
1073 | dev_set_name(&chan->dev->device, name);
| ^~~~~~~~~~~~
Change this newly added instance to use "%s" as the format instead to
pass the actual name.
Fixes: 10b8e0fd3f ("dmaengine: add channel device name to channel registration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240719102319.546622-1-arnd@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
i.MX21 support has been removed since commit 4b563a0666 ("ARM: imx:
Remove imx21 support").
Remove the i.MX21 support inside the imx-dma driver.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240806021744.2524233-1-festevam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Document the IPG and AHB clocks that are needed by the DMA hardware
as required properties.
It is not possible to have DMA functional without the DMA clocks
being turned on.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240807170517.64290-1-festevam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ZynqMP DMA IP and AMD Versal Gen 2 DMA IP are similar but have different
interrupt register offset. Create a dedicated compatible string to
support Versal Gen 2 DMA IP with Irq register offset for interrupt
Enable/Disable/Status/Mask functionality.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Reviewed-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Link: https://lore.kernel.org/r/20240808100024.317497-3-abin.joseph@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add compatible string "amd,versal2-dma-1.0" to support AMD Versal Gen 2
platform.
AMD Versal Gen 2 has 8 LPD DMA IPs in PS that can be used as general
purpose DMAs which is designed to support memory to memory and memory to
IO buffer transfer. Versal Gen 2 DMA IP has different interrupt register
offset.
Signed-off-by: Abin Joseph <abin.joseph@amd.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240808100024.317497-2-abin.joseph@amd.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ACPICA commit 6c551e2c9487067d4b085333e7fe97e965a11625
Link: 6c551e2c
Signed-off-by: Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit aaa08569b81aa4d9ff59f91f00e589e98d499e6c
Redefine the 2 reserved bytes at offset 28 of Memory Side Cache Information
Structure as "Address Mode" and add defines of the new value.
* 0 - Reserved (Unkown Address Mode)
* 1 - Extended-linear (N direct-map aliases linearly mapped)
* 2..65535 - Reserved (Unknown Address Mode)
Link: aaa08569
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 6031b34b5dbabfaaebe80e57e8e415790b51d285
Only include the functions acpi_rs_dump_resource_list
and acpi_rs_dump_irq_list() if ACPI_DEBUGGER is defined, as
specified in the header.
This avoids the compiler warning by adding the ifdef for ACPI_DEBUGGER.
Link: 6031b34b
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f2cb44f6deb6325a6b348b225fc82f565a870899
Add "0x" prefix for explicitly converted integers
and suppress leading zeros in such a case.
Provides compatibility with other ACPI implementations.
Link: f2cb44f6
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 86289439d9f8b9eda28c249da66ae230d6439491
Currently the leading_zeros argument has no effect when
converting hex integers. Fix that.
Link: 86289439
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 792a337104ce2c1729d33d76241b42b3214aa60f
Allow to specifiy wether leading zeros should be supressed
ot not when using acpi_ex_convert_to_ascii().
Link: 792a3371
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A new DSA device ID, 0x1212, and a new IAA device ID, 0x1216, are
introduced for Diamond Rapids platform. Add the device IDs to the IDXD
driver.
The name "IAA" is used in new code instead of the old name "IAX".
However, the "IAX" naming (e.g., IDXD_TYPE_IAX) is retained for legacy
code compatibility.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240828233401.186007-3-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
A new DSA device ID, 0x11fb, is introduced for the Granite Rapids-D
platform. Add the device ID to the IDXD driver.
Since a potential security issue has been fixed on the new device, it's
secure to assign the device to virtual machines, and therefore, the new
device ID will not be added to the VFIO denylist. Additionally, the new
device ID may be useful in identifying and addressing any other potential
issues with this specific device in the future. The same is also applied
to any other new DSA/IAA devices with new device IDs.
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/20240828233401.186007-2-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
ACPICA commit 1280045754264841b119a5ede96cd005bc09b5a7
If acpi_ps_get_next_field() fails, the previously created field list
needs to be properly disposed before returning the status code.
Link: 12800457
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
[ rjw: Rename local variable to avoid compiler confusion ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that actual overlaps are not handled on the wait_for_overlap wq
anymore, the remaining cases when we wait on this wq are limited to
reshape. If reshape is not in progress, don't add to the wq in
raid5_make_request() because add_wait_queue() / remove_wait_queue()
operations take a spinlock and cause noticeable contention when multiple
threads are submitting requests to the mddev.
Signed-off-by: Artur Paszkiewicz <artur.paszkiewicz@intel.com>
Link: https://lore.kernel.org/r/20240827153536.6743-3-artur.paszkiewicz@intel.com
Signed-off-by: Song Liu <song@kernel.org>
We do not need model specific HDA quirks to construct the component
binding details of Cirrus Logic companion amplifiers as this information
is already present in the ACPI.
Quirks are then only required for special workarounds not described in
the ACPI such as internal configuration of the Realtek codecs.
The codec pointer is now initialized in hda_component_manager_init() so
that we can detect when companion amplifiers are found in the ACPI but
the SSID invokes a quirk that also attempts to create the component
binding.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240829161114.140938-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Read temperature of the speaker and expose it via hwmon interface, which
will be later used during calibration of speaker protection algorithms.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240809110122.137761-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
ACPICA commit 2802af722bbde7bf1a7ac68df68e179e2555d361
If acpi_ps_get_next_namepath() fails, the previously allocated
union acpi_parse_object needs to be freed before returning the
status code.
The issue was first being reported on the Linux ACPI mailing list:
Link: https://lore.kernel.org/linux-acpi/56f94776-484f-48c0-8855-dba8e6a7793b@yandex.ru/T/
Link: 2802af72
Signed-off-by: Armin Wolf <W_Armin@gmx.de>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit f0776a465cc2c20393bec534c16bdee4a78f7bb7
explicitly allow QWord address space description type
to be 0xA to indicate it refers to a Platform
Communication channel
IAW ACPI_ECR_PCC_DESCRIPTORS_CF_V2
https://bugzilla.tianocore.org/show_bug.cgi?id=4594
An entity in a DSDT or in SSDTs that requires
a platform communication channel table (PCCT) entry
to communicate with a remote service will have a single
value that is the index of the entry in the PCCT.
This data type with have a resource_type value of 0xA.
This value indicates that the type shares the same
footprint as a Dword_space section.
Link: f0776a46
Signed-off-by: Adam Young <ayoung@amperecomputing.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 129b75516fc49fe1fd6b8c5798f86c13854630b3
Stop nagging user about every Stall() that violates the spec
On my Dell XPS 15 7590 I get hundreds of these warnings after few hours of
uptime:
$ dmesg | grep "fix the firmware" | wc -l
261
I cannot fix the firmware and I doubt that Dell cares about 4 year old
laptop either
Fixes: ace8f1c54a ("ACPICA: executer/exsystem: Inform users about ACPI spec violation")
Link: 129b7551
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 2ad4e6e7c4118f4cdfcad321c930b836cec77406
In some cases it is not practical nor useful to nag user about some
firmware errors that they cannot fix. Add a macro that will print a
warning or error only once to be used in these cases.
Link: 2ad4e6e7
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 3da3f7d776d17e9bfbb15de88317de8d7397ce38
A member of the struct acpi_mpam_msc_node that represents a Memory System
Controller node structure - num_resource_nodes has a typo. Fix the typo
No functional change.
Link: 3da3f7d7
Signed-off-by: Punit Agrawal <punit.agrawal@bytedance.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
