Instead of just smashing jiffies into a GUID, use guid_gen() to generate
RFC 4122 compliant GUIDs.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-2-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
The kernel has a guid_t type for GUIDs. Switch to using it, but avoid
any functional changes here.
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812122312.1567046-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
assigned-clocks property is redundant, because core dtschema allows them
if clocks are provided.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240818173014.122073-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
The 32kHz input clock is named "xin32k" in the driver,
so the name "32k" appears to be a typo in this case. Lets fix this.
Signed-off-by: Alexander Shiyan <eagle.alexander923@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Fixes: f1c506d152 ("clk: rockchip: add clock controller for the RK3588")
Link: https://lore.kernel.org/r/20240829052820.3604-1-eagle.alexander923@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Broonie reports that the set_id_regs test is failing as of commit
5cb57a1aff ("KVM: arm64: Zero ID_AA64PFR0_EL1.GIC when no GICv3 is
presented to the guest"). The test does not anticipate the 'late' ID
register fixup where KVM clobbers the GIC field in absence of GICv3.
While the field technically has FTR_LOWER_SAFE behavior, fix the issue
by setting it to an exact value of 0, matching the effect of the 'late'
fixup.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Link: https://lore.kernel.org/r/20240829004622.3058639-1-oliver.upton@linux.dev
Signed-off-by: Marc Zyngier <maz@kernel.org>
The NETCMIX block control consists of registers for configuration of
peripherals in the NETC domain, so enable the clock of NETCMIX to
support the configuration.
Signed-off-by: Wei Fang <wei.fang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240829011849.364987-4-wei.fang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
"acm_aud_clk0_sel" and "acm_aud_clk1_sel" are registered by this ACM
driver, but they are the parent clocks for other clocks, in order to
use assigned-clock-parents in device tree, the ".fw_name" can't be used,
need to assign the clk_hw pointer for the imx8qm_mclk_sels[],
imx8qxp_mclk_sels[], imx8dxl_mclk_sels[].
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1720600860-18866-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Abel Vesa <abel.vesa@linaro.org>
If an interrupt occurs in queued_spin_lock_slowpath() after we increment
qnodesp->count and before node->lock is initialized, another CPU might
see stale lock values in get_tail_qnode(). If the stale lock value happens
to match the lock on that CPU, then we write to the "next" pointer of
the wrong qnode. This causes a deadlock as the former CPU, once it becomes
the head of the MCS queue, will spin indefinitely until it's "next" pointer
is set by its successor in the queue.
Running stress-ng on a 16 core (16EC/16VP) shared LPAR, results in
occasional lockups similar to the following:
$ stress-ng --all 128 --vm-bytes 80% --aggressive \
--maximize --oomable --verify --syslog \
--metrics --times --timeout 5m
watchdog: CPU 15 Hard LOCKUP
......
NIP [c0000000000b78f4] queued_spin_lock_slowpath+0x1184/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
Call Trace:
0xc000002cfffa3bf0 (unreliable)
_raw_spin_lock+0x6c/0x90
raw_spin_rq_lock_nested.part.135+0x4c/0xd0
sched_ttwu_pending+0x60/0x1f0
__flush_smp_call_function_queue+0x1dc/0x670
smp_ipi_demux_relaxed+0xa4/0x100
xive_muxed_ipi_action+0x20/0x40
__handle_irq_event_percpu+0x80/0x240
handle_irq_event_percpu+0x2c/0x80
handle_percpu_irq+0x84/0xd0
generic_handle_irq+0x54/0x80
__do_irq+0xac/0x210
__do_IRQ+0x74/0xd0
0x0
do_IRQ+0x8c/0x170
hardware_interrupt_common_virt+0x29c/0x2a0
--- interrupt: 500 at queued_spin_lock_slowpath+0x4b8/0x1490
......
NIP [c0000000000b6c28] queued_spin_lock_slowpath+0x4b8/0x1490
LR [c000000001037c5c] _raw_spin_lock+0x6c/0x90
--- interrupt: 500
0xc0000029c1a41d00 (unreliable)
_raw_spin_lock+0x6c/0x90
futex_wake+0x100/0x260
do_futex+0x21c/0x2a0
sys_futex+0x98/0x270
system_call_exception+0x14c/0x2f0
system_call_vectored_common+0x15c/0x2ec
The following code flow illustrates how the deadlock occurs.
For the sake of brevity, assume that both locks (A and B) are
contended and we call the queued_spin_lock_slowpath() function.
CPU0 CPU1
---- ----
spin_lock_irqsave(A) |
spin_unlock_irqrestore(A) |
spin_lock(B) |
| |
▼ |
id = qnodesp->count++; |
(Note that nodes[0].lock == A) |
| |
▼ |
Interrupt |
(happens before "nodes[0].lock = B") |
| |
▼ |
spin_lock_irqsave(A) |
| |
▼ |
id = qnodesp->count++ |
nodes[1].lock = A |
| |
▼ |
Tail of MCS queue |
| spin_lock_irqsave(A)
▼ |
Head of MCS queue ▼
| CPU0 is previous tail
▼ |
Spin indefinitely ▼
(until "nodes[1].next != NULL") prev = get_tail_qnode(A, CPU0)
|
▼
prev == &qnodes[CPU0].nodes[0]
(as qnodes[CPU0].nodes[0].lock == A)
|
▼
WRITE_ONCE(prev->next, node)
|
▼
Spin indefinitely
(until nodes[0].locked == 1)
Thanks to Saket Kumar Bhaskar for help with recreating the issue
Fixes: 84990b1695 ("powerpc/qspinlock: add mcs queueing for contended waiters")
Cc: stable@vger.kernel.org # v6.2+
Reported-by: Geetika Moolchandani <geetika@linux.ibm.com>
Reported-by: Vaishnavi Bhat <vaish123@in.ibm.com>
Reported-by: Jijo Varghese <vargjijo@in.ibm.com>
Signed-off-by: Nysal Jan K.A. <nysal@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240829022830.1164355-1-nysal@linux.ibm.com
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
A NULL dev->dma_parms indicates either a bus that is not DMA capable or
grave bug in the implementation of the bus code.
There isn't much the driver can do in terms of error handling for either
case, so just warn and continue as DMA operations will fail anyway.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
We'll start throwing warnings soon when dma_set_seg_boundary and
dma_set_max_seg_size are called on devices for buses that don't fully
support the DMA API. Prepare for that by making the calls in the SCSI
midlayer conditional.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Some platforms, like Rockchip RK3568 based Odroid M1, do not provide DMA
limits information in device-tree dma-ranges property. Still some device
drivers set DMA limit that relies on DMA zone at low 4GB memory area.
Until commit ba0fb44aed ("dma-mapping: replace zone_dma_bits by
zone_dma_limit"), zone_sizes_init() restricted DMA zone to low 32-bit.
Restore DMA zone 32-bit limit when the platform provides no DMA bus
limit information.
Fixes: ba0fb44aed ("dma-mapping: replace zone_dma_bits by zone_dma_limit")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Link: https://lore.kernel.org/r/53d988b1-bdce-422a-ae4e-158f305ad703@samsung.com
Suggested-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Don Brace <don.brace@microchip.com> says:
These patches are based on Martin Petersen's 6.12/scsi-queue tree
https://git.kernel.org/pub/scm/linux/kernel/git/mkp/scsi.git
6.12/scsi-queue
There are two functional changes:
smartpqi-add-fw-log-to-kdump
smartpqi-add-counter-for-parity-write-stream-requests
There are three minor bug fixes:
smartpqi-fix-stream-detection
smartpqi-fix-rare-system-hang-during-LUN-reset
smartpqi-fix-volume-size-updates
The other two patches add PCI-IDs for new controllers and change the
driver version.
This set of changes consists of:
* smartpqi-add-fw-log-to-kdump
During a kdump, the driver tells the controller to copy its logging
information to some pre-allocated buffers that can be analyzed
later.
This is a "feature" driven capability and is backward compatible
with existing controller FW.
This patch renames some prefixes for OFA (Online-Firmware Activation
ofa_*) buffers to host_memory_*. So, not a lot of actual functional
changes to smartpqi_init.c, mainly determining the memory size
allocation.
We added a function to notify the controller to copy debug data into
host memory before continuing kdump.
Most of the functional changes are in smartpqi_sis.c where the
actual handshaking is done.
* smartpqi-fix-stream-detection
Correct some false write-stream detections. The data structure used
to check for write-streams was not initialized to all 0's causing
some false write stream detections. The driver sends down streamed
requests to the raid engine instead of using AIO bypass for some
extra performance. (Potential full-stripe write verses Read Modify
Write).
False detections have not caused any data corruption. Found by
internal testing. No known externally reported bugs.
* smartpqi-add-counter-for-parity-write-stream-requests
Adding some counters for raid_bypass and write streams. These two
counters are related because write stream detection is only checked
if an I/O request is eligible for bypass (AIO).
The bypass counter (raid_bypass_cnt) was moved into a common
structure (pqi_raid_io_stats) and changed to type __percpu. The
write stream counter is (write_stream_cnt) has been added to this
same structure.
These counters are __percpu counters for performance. We added a
sysfs entry to show the write stream count. The raid bypass counter
sysfs entry already exists.
Useful for checking streaming writes. The change in the sysfs entry
write_stream_cnt can be checked during AIO eligible write
operations.
* smartpqi-add-new-controller-PCI-IDs
Adding support for new controller HW. No functional changes.
* smartpqi-fix-rare-system-hang-during-LUN-reset
We found a rare race condition that can occur during a LUN reset. We
were not emptying our internal queue completely.
There have been some rare conditions where our internal request
queue has requests for multiple LUNs and a reset comes in for one of
the LUNs. The driver waits for this internal queue to empty. We were
only clearing out the requests for the LUN being reset so the
request queue was never empty causing a hang.
The Fix:
For all requests in our internal request queue:
Complete requests with DID_RESET for queued requests for the
device undergoing a reset.
Complete requests with DID_REQUEUE for all other queued requests.
Found by internal testing. No known externally reported bugs.
* smartpqi-fix-volume-size-updates
The current code only checks for a size change if there is also a
queue depth change. We are separating the check for queue depth and
the size changes.
Found by internal testing. No known bugs were filed.
* smartpqi-update-version-to-2.1.30-031
No functional changes.
Link: https://lore.kernel.org/r/20240827185501.692804-1-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Update driver version to 2.1.30-031.
Reviewed-by: David Strahan <david.strahan@microchip.com>
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Reviewed-by: Gerry Morong <gerry.morong@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-8-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct logical volume size changes by moving the check for a volume rescan
outside of the check for a queue depth change.
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-7-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct a rare case where in a LUN reset occurs on a device and I/O
requests for other devices persist in the driver's internal request queue.
Part of a LUN reset involves waiting for our internal request queue to
empty before proceeding. The internal request queue contains requests not
yet sent down to the controller.
We were clearing the requests queued for the LUN undergoing a reset, but
not all of the queued requests. Causing a hang.
For all requests in our internal request queue:
Complete requests with DID_RESET for queued requests for the device
undergoing a reset.
Complete requests with DID_REQUEUE for all other queued requests.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-6-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add sysfs entry to check for write stream requests.
Move existing raid_bypass_cnt into a structure named pqi_raid_io_stats and
add member write_stream_cnt. These two counters are related because write
stream detection is only checked if an I/O request is eligible for bypass
(AIO).
Example usage:
lsscsi
[15:1:0:0] disk Adaptec LOGICAL VOLUME 0129 /dev/sdae
cat /sys/block/sdae/device/ssd_smart_path_enabled
1
^
|
+---- NOTE: here bypass has been enabled on device sdae
To read the counter for parity write stream requests:
cat /sys/block/sdae/device/write_stream_cnt
0x60cd507
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Co-developed-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Kevin Barnett <kevin.barnett@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-4-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Correct stream detection by initializing the structure
pqi_scsi_dev_raid_map_data to 0s.
When the OS issues SCSI READ commands, the driver erroneously considers
them as SCSI WRITES. If they are identified as sequential IOs, the driver
then submits those requests via the RAID path instead of the AIO path.
The 'is_write' flag might be set for SCSI READ commands also. The driver
may interpret SCSI READ commands as SCSI WRITE commands, resulting in IOs
being submitted through the RAID path.
Note: This does not cause data corruption.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Scott Teel <scott.teel@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Mahesh Rajashekhara <mahesh.rajashekhara@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-3-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Add controller logs to kdump.
Driver allocates DMA memory and communicates this address to FW. In the
event of system crash, host driver notifies the firmware about the crash
and firmware posts all the necessary logs in the pre-allocated host buffer
for firmware debugging.
Once firmware notifies the completion of the log uploading to the host
memory and host continues with the OS crash dump saving.
This is a "feature" driven capability and is backward compatible with
existing controller FW.
Rename some prefixes for OFA (Online-Firmware Activation ofa_*) buffers to
host_memory_*. So, not a lot of actual functional changes to
smartpqi_init.c, mainly determining the memory size allocation.
Added a function to notify the controller to copy debug data into host
memory before continuing kdump.
Most of the functional changes are in smartpqi_sis.c where the actual
handshaking is done.
Reviewed-by: Scott Benesh <scott.benesh@microchip.com>
Reviewed-by: Mike McGowen <mike.mcgowen@microchip.com>
Signed-off-by: Murthy Bhat <Murthy.Bhat@microchip.com>
Signed-off-by: Don Brace <don.brace@microchip.com>
Link: https://lore.kernel.org/r/20240827185501.692804-2-don.brace@microchip.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
-----BEGIN PGP SIGNATURE-----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=a3c1
-----END PGP SIGNATURE-----
Merge tag 'random-6.11-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull random number generator fix from Jason Donenfeld:
"Reject invalid flags passed to vgetrandom() in the same way that
getrandom() does, so that the behavior is the same, from Yann.
The flags argument to getrandom() only has a behavioral effect on the
function if the RNG isn't initialized yet, so vgetrandom() falls back
to the syscall in that case. But if the RNG is initialized, all of the
flags behave the same way, so vgetrandom() didn't bother checking
them, and just ignored them entirely.
But that doesn't account for invalid flags passed in, which need to be
rejected so we can use them later"
* tag 'random-6.11-rc6-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
random: vDSO: reject unknown getrandom() flags
Adding software support for enabling the pure gpio capability of the
device - which allows all I/O to be used as GPIO. Previously, I/O
configuration was limited by software to partial GPIO support only.
When working in a pure gpio mode, the device does not require the
certain properties and hence, the following are now made optional:
- interrupts
- keypad,num-rows
- keypad,num-columns
- linux,keymap
However, note that the above are required to be specified when
configuring the device as a keypad, for which dependencies have been added
such that specifying either one requires the remaining as well.
Also, note that interrupts are made optional, but required when the device
has either been configured in keypad mode or as an interrupt controller.
This has been done since they may not necessarily be used when leveraging
the device purely for GPIO.
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Link: https://lore.kernel.org/r/20240826-adp5588_gpio_support-v11-3-3e5ac2bd31b7@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Keypad specific setup is relaxed if no keypad rows/columns are specified,
enabling a purely gpio operation.
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Link: https://lore.kernel.org/r/20240826-adp5588_gpio_support-v11-2-3e5ac2bd31b7@analog.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The 'del_list_entry' field in "struct fc_port" is unused.
The field was introduced in commit 2d70c103fd ("[SCSI] qla2xxx: Add LLD
target-mode infrastructure for >= 24xx series") in 2012-05 and the last
user was removed in commit 726b854870 ("qla2xxx: Add framework for async
fabric discovery") in 2017-02.
Remove this unused field.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/69155321ab26c1f4d473d5bb6cd44b59b9b6a020.1724094686.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MT8183 implements the UFSHCI 2.1 spec but reports a bogus value of 1 in
the reserved part for the Legacy Single Doorbell Support (LSDBS)
capability.
Set UFSHCD_QUIRK_BROKEN_LSDBS_CAP when MCQ support is explicitly
disabled, allowing the device to be properly registered.
Signed-off-by: Mary Guillemard <mary@mary.zone>
Link: https://lore.kernel.org/r/20240818222442.44990-3-mary@mary.zone
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Krzysztof Kozlowski says:
====================
net: hisilicon: minor fixes
Minor fixes for hisilicon ethernet driver which look too trivial to be
considered for current RC.
====================
Link: https://patch.msgid.link/20240827144421.52852-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ufshcd_urgent_bkops() is a wrapper function. It only calls
ufshcd_bkops_ctrl(). Remove it to simplify the ufs core driver. Replace any
references to ufshcd_urgent_bkops() with ufshcd_bkops_ctrl().
In addition, remove the second parameter in the ufshcd_bkops_ctrl() because
the information can be retrieved from the first parameter.
Signed-off-by: Bao D. Nguyen <quic_nguyenb@quicinc.com>
Link: https://lore.kernel.org/r/0c7f2c8d68408e39c28e3e81addce09cc0ee3969.1724800328.git.quic_nguyenb@quicinc.com
Acked-by: Avri Altman <avri.altman@wdc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Every time I see libata code calling scsi_check_sense(), I get confused
why the code path that is working fine for SCSI code, is not sufficient
for libata code.
The reason is that SCSI usually gets the sense data as part of the
completion, and will thus automatically call scsi_check_sense(), which
will set the SCSI ML byte (if any).
However, for libata queued commands, we always need to fetch the sense
data via SCSI EH, and thus do not get the luxury of having
scsi_check_sense() called automatically.
Add a new helper, ata_eh_decide_disposition(), that has a ata_eh_ prefix
to more clearly highlight that this is only needed for code called by EH,
while also having a similar name to scsi_decide_disposition(), such that
it is easier to compare the libata code with the equivalent SCSI code.
Also add a big kdoc comment explaining why this helper is called/needed in
the first place.
Signed-off-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
scsi_driverbyte_string() has been unused since commit 54c2908619 ("scsi:
core: Drop the now obsolete driver_byte definitions"). Remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20240826032005.4007834-1-cuigaosheng1@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in hns_mac_get_info().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Driver is leaking OF node reference from
of_parse_phandle_with_fixed_args() in probe().
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240827144421.52852-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GPIOF_DIR_* definitions are legacy and subject to remove.
Taking this into account, remove stale comment.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20240827171005.2301845-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Typically, busy-polling durations are below 100 usec.
When/if the busy-poller thread migrates to another cpu,
local_clock() can be off by +/-2msec or more for small
values of HZ, depending on the platform.
Use ktimer_get_ns() to ensure deterministic behavior,
which is the whole point of busy-polling.
Fixes: 0602129286 ("net: add low latency socket poll")
Fixes: 9a3c71aa80 ("net: convert low latency sockets to sched_clock()")
Fixes: 3708983452 ("sched, net: Fixup busy_loop_us_clock()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Mina Almasry <almasrymina@google.com>
Cc: Willem de Bruijn <willemb@google.com>
Reviewed-by: Joe Damato <jdamato@fastly.com>
Link: https://patch.msgid.link/20240827114916.223377-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Change VMBus channels macro (VRSS_CHANNEL_DEFAULT) in
Linux netvsc from 8 to 16 to align with Azure Windows VM
and improve networking throughput.
For VMs having less than 16 vCPUS, the channels depend
on number of vCPUs. For greater than 16 vCPUs,
set the channels to maximum of VRSS_CHANNEL_DEFAULT and
number of physical cores / 2 which is returned by
netif_get_num_default_rss_queues() as a way to optimize CPU
resource utilization and scale for high-end processors with
many cores.
Maximum number of channels are by default set to 64.
Based on this change the channel creation would change as follows:
-----------------------------------------------------------------
| No. of vCPU | dev_info->num_chn | channels created |
-----------------------------------------------------------------
| 1-16 | 16 | vCPU |
| >16 | max(16,#cores/2) | min(64 , max(16,#cores/2)) |
-----------------------------------------------------------------
Performance tests showed significant improvement in throughput:
- 0.54% for 16 vCPUs
- 0.83% for 32 vCPUs
- 0.86% for 48 vCPUs
- 9.72% for 64 vCPUs
- 13.57% for 96 vCPUs
Signed-off-by: Erni Sri Satya Vennela <ernis@linux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@linux.microsoft.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Link: https://patch.msgid.link/1724735791-22815-1-git-send-email-ernis@linux.microsoft.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ethtool of this driver uses the phy API of ethtool
to get the link information from PHY driver.
Because the NC-SI is forced on 100Mbps and full duplex,
the driver connect a fixed-link phy driver for NC-SI.
The ethtool will get the link information from the
fixed-link phy driver.
Signed-off-by: Jacky Chou <jacky_chou@aspeedtech.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240827030513.481469-1-jacky_chou@aspeedtech.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds test cases for zero offset (implicit cast) or non-zero
offset pointer as KF_ACQUIRE kfuncs argument. Currently KF_ACQUIRE
kfuncs should support passing in pointers like &sk->sk_write_queue
(non-zero offset) or &sk->__sk_common (zero offset) and not be rejected
by the verifier.
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848CB6F0D4D9068669A905B99952@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently we cannot pass zero offset (implicit cast) or non-zero offset
pointers to KF_ACQUIRE kfuncs. This is because KF_ACQUIRE kfuncs
requires strict type matching, but zero offset or non-zero offset does
not change the type of pointer, which causes the ebpf program to be
rejected by the verifier.
This can cause some problems, one example is that bpf_skb_peek_tail
kfunc [0] cannot be implemented by just passing in non-zero offset
pointers. We cannot pass pointers like &sk->sk_write_queue (non-zero
offset) or &sk->__sk_common (zero offset) to KF_ACQUIRE kfuncs.
This patch makes KF_ACQUIRE kfuncs not require strict type matching.
[0]: https://lore.kernel.org/bpf/AM6PR03MB5848CA39CB4B7A4397D380B099B12@AM6PR03MB5848.eurprd03.prod.outlook.com/
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Link: https://lore.kernel.org/r/AM6PR03MB5848FD2BD89BF0B6B5AA3B4C99952@AM6PR03MB5848.eurprd03.prod.outlook.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Eric Dumazet says:
====================
tcp: take better care of tw_substate and tw_rcv_nxt
While reviewing Jason Xing recent commit (0d9e5df4a2 "tcp: avoid reusing
FIN_WAIT2 when trying to find port in connect() process") I saw
we could remove the volatile qualifier for tw_substate field,
and I also added missing data-race annotations around tcptw->tw_rcv_nxt.
====================
Link: https://patch.msgid.link/20240827015250.3509197-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
No lock protects tcp tw fields.
tcptw->tw_rcv_nxt can be changed from twsk_rcv_nxt_update()
while other threads might read this field.
Add READ_ONCE()/WRITE_ONCE() annotations, and make sure
tcp_timewait_state_process() reads tcptw->tw_rcv_nxt only once.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20240827015250.3509197-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using a volatile qualifier for a specific struct field is unusual.
Use instead READ_ONCE()/WRITE_ONCE() where necessary.
tcp_timewait_state_process() can change tw_substate while other
threads are reading this field.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jason Xing <kerneljasonxing@gmail.com>
Link: https://patch.msgid.link/20240827015250.3509197-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
During the list_for_each_entry_rcu iteration call of xenvif_flush_hash,
kfree_rcu does not exist inside the rcu read critical section, so if
kfree_rcu is called when the rcu grace period ends during the iteration,
UAF occurs when accessing head->next after the entry becomes free.
Therefore, to solve this, you need to change it to list_for_each_entry_safe.
Signed-off-by: Jeongjun Park <aha310510@gmail.com>
Link: https://patch.msgid.link/20240822181109.2577354-1-aha310510@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
