In addition to current relative timeouts for the waiting loop, where the
timespec argument specifies the maximum time it can wait for, add
support for the absolute mode, with the value carrying a CLOCK_MONOTONIC
absolute time until which we should return control back to the user.
Suggested-by: Lewis Baker <lewissbaker@gmail.com>
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/4d5b74d67ada882590b2e42aa3aa7117bbf6b55f.1723039801.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Remove io_napi_adjust_timeout() and move the adjustments out of the
common path into __io_napi_busy_loop(). Now the limit it's calculated
based on struct io_wait_queue::timeout, for which we query current time
another time. The overhead shouldn't be a problem, it's a polling path,
however that can be optimised later by additionally saving the delta
time value in io_cqring_wait().
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/88e14686e245b3b42ff90a3c4d70895d48676206.1723039801.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We could just move these two and save some space, but in preparation
for adding another flag, turn them into flags first.
This saves 8 bytes in struct io_buffer_list, making it exactly half
a cacheline on 64-bit archs now rather than 40 bytes.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Just like what is being done on the recv side, if we only map a single
segment, then use ITER_UBUF for mapping it. That's more efficient than
using an ITER_IOVEC.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
req->buf_list is assigned higher up and is safe to use as we remain
within a locked region, as is the 'bl' variable itself from which it
was assigned. To improve readability, use 'bl' directly rather than
get it from the io_kiocb, if we need to increment the head directly
in the buffer selection path. This makes it readily apparent that
it's the same io_buffer_list being used.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
reverse the order of the element evaluation in an if statement.
for many users that are not using iopoll, the iopoll_list will always
evaluate to false after having made a memory access whereas to_submit is
very likely already loaded in a register.
Signed-off-by: Olivier Langlois <olivier@trillion01.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/052ca60b5c49e7439e4b8bd33bfab4a09d36d3d6.1722374371.git.olivier@trillion01.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add support for checking and coalescing multi-hugepage-backed fixed
buffers. The coalescing optimizes both time and space consumption caused
by mapping and storing multi-hugepage fixed buffers.
A coalescable multi-hugepage buffer should fully cover its folios
(except potentially the first and last one), and these folios should
have the same size. These requirements are for easier processing later,
also we need same size'd chunks in io_import_fixed for fast iov_iter
adjust.
Signed-off-by: Chenliang Li <cliang01.li@samsung.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20240731090133.4106-3-cliang01.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Store the folio shift and folio mask into imu struct and use it in
iov_iter adjust, as we will have non PAGE_SIZE'd chunks if a
multi-hugepage buffer get coalesced.
Signed-off-by: Chenliang Li <cliang01.li@samsung.com>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/20240731090133.4106-2-cliang01.li@samsung.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
SS is initialized to NULL during boot time and not explicitly set to
__KERNEL_DS.
With FRED enabled, if a kernel event is delivered before a CPU goes to
user level for the first time, its SS is NULL thus NULL is pushed into
the SS field of the FRED stack frame. But before ERETS is executed,
the CPU may context switch to another task and go to user level. Then
when the CPU comes back to kernel mode, SS is changed to __KERNEL_DS.
Later when ERETS is executed to return from the kernel event handler,
a #GP fault is generated because SS doesn't match the SS saved in the
FRED stack frame.
Initialize SS to __KERNEL_DS when enabling FRED to prevent that.
Note, IRET doesn't check if SS matches the SS saved in its stack frame,
thus IDT doesn't have this problem. For IDT it doesn't matter whether
SS is set to __KERNEL_DS or not, because it's set to NULL upon interrupt
or exception delivery and __KERNEL_DS upon SYSCALL. Thus it's pointless
to initialize SS for IDT.
Signed-off-by: Xin Li (Intel) <xin@zytor.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240816104316.2276968-1-xin@zytor.com
144d:c1cc requires the same workaround to enable the speaker amp
as other Samsung models with the ALC298 codec.
Signed-off-by: YOUNGJIN JOO <neoelec@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://patch.msgid.link/20240825092515.28728-1-neoelec@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
dma-direct.h is introduced in commit d4b6f1562a ("LoongArch: Add
Non-Uniform Memory Access (NUMA) support"). In commit c78c43fe7d
("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA"),
ARCH_HAS_PHYS_TO_DMA was deselected and the coresponding phys_to_dma()/
dma_to_phys() functions were removed. However, the unused dma-direct.h
was left behind, which is removed by this patch.
Cc: <stable@vger.kernel.org>
Fixes: c78c43fe7d ("LoongArch: Use acpi_arch_dma_setup() and remove ARCH_HAS_PHYS_TO_DMA")
Signed-off-by: Miao Wang <shankerwangmiao@gmail.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Add new PCI IDs for Device 18h and Function 4 to enable the amd_atl driver
on those systems.
Signed-off-by: Richard Gong <richard.gong@amd.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/all/20240819123041.915734-1-richard.gong@amd.com
init_per_cpu_var() returns a pointer in the percpu address space while
rip_rel_ptr() expects a pointer in the generic address space.
When strict address space checks are enabled, GCC's named address space
checks fail:
asm.h:124:63: error: passing argument 1 of 'rip_rel_ptr' from
pointer to non-enclosed address space
Add a explicit cast to remove address space of the returned pointer.
Fixes: 11e36b0f7c ("x86/boot/64: Load the final kernel GDT during early boot directly, remove startup_gdt[]")
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240819083334.148536-1-ubizjak@gmail.com
The cifs filesystem doesn't quite emulate FALLOC_FL_PUNCH_HOLE correctly
(note that due to lack of protocol support, it can't actually implement it
directly). Whilst it will (partially) invalidate dirty folios in the
pagecache, it doesn't write them back first, and so the EOF marker on the
server may be lower than inode->i_size.
This presents a problem, however, as if the punched hole invalidates the
tail of the locally cached dirty data, writeback won't know it needs to
move the EOF over to account for the hole punch (which isn't supposed to
move the EOF). We could just write zeroes over the punched out region of
the pagecache and write that back - but this is supposed to be a
deallocatory operation.
Fix this by manually moving the EOF over on the server after the operation
if the hole punched would corrupt it.
Note that the FSCTL_SET_ZERO_DATA RPC and the setting of the EOF should
probably be compounded to stop a third party interfering (or, at least,
massively reduce the chance).
This was reproducible occasionally by using fsx with the following script:
truncate 0x0 0x375e2 0x0
punch_hole 0x2f6d3 0x6ab5 0x375e2
truncate 0x0 0x3a71f 0x375e2
mapread 0xee05 0xcf12 0x3a71f
write 0x2078e 0x5604 0x3a71f
write 0x3ebdf 0x1421 0x3a71f *
punch_hole 0x379d0 0x8630 0x40000 *
mapread 0x2aaa2 0x85b 0x40000
fallocate 0x1b401 0x9ada 0x40000
read 0x15f2 0x7d32 0x40000
read 0x32f37 0x7a3b 0x40000 *
The second "write" should extend the EOF to 0x40000, and the "punch_hole"
should operate inside of that - but that depends on whether the VM gets in
and writes back the data first. If it doesn't, the file ends up 0x3a71f in
size, not 0x40000.
Fixes: 31742c5a33 ("enable fallocate punch hole ("fallocate -p") for SMB3")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Steve French <sfrench@samba.org>
cc: Paulo Alcantara <pc@manguebit.com>
cc: Shyam Prasad N <nspmangalore@gmail.com>
cc: Jeff Layton <jlayton@kernel.org>
cc: linux-cifs@vger.kernel.org
cc: netfs@lists.linux.dev
Signed-off-by: Steve French <stfrench@microsoft.com>
rqst.rq_iter needs to be truncated otherwise we'll
also send the bytes into the stream socket...
This is the logic behind rqst.rq_npages = 0, which was removed in
"cifs: Change the I/O paths to use an iterator rather than a page list"
(d08089f649).
Cc: stable@vger.kernel.org
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Reviewed-by: David Howells <dhowells@redhat.com>
Fixes: d08089f649 ("cifs: Change the I/O paths to use an iterator rather than a page list")
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
This happens when called from SMB2_read() while using rdma
and reaching the rdma_readwrite_threshold.
Cc: stable@vger.kernel.org
Fixes: a6559cc1d3 ("cifs: split out smb3_use_rdma_offload() helper")
Reviewed-by: David Howells <dhowells@redhat.com>
Signed-off-by: Stefan Metzmacher <metze@samba.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add a method for `ARef` that is analogous to `Arc::into_raw`. It is the
inverse operation of `ARef::from_raw`, and allows you to convert the
`ARef` back into a raw pointer while retaining ownership of the
refcount.
This new function will be used by [1] for converting the type in an
`ARef` using `ARef::from_raw(ARef::into_raw(me).cast())`. Alice has
also needed the same function for other use-cases in the past, but [1]
is the first to go upstream.
This was implemented independently by Kartik and Alice. The two versions
were merged by Alice, so all mistakes are Alice's.
Link: https://lore.kernel.org/r/20240801-vma-v3-1-db6c1c0afda9@google.com [1]
Link: https://github.com/Rust-for-Linux/linux/issues/1044
Signed-off-by: Kartik Prajapati <kartikprajapati987@gmail.com>
Co-developed-by: Alice Ryhl <aliceryhl@google.com>
Signed-off-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
[ Reworded to correct the author reference and changed tag to Link
since it is not a bug. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use links to docs.kernel.org instead of www.kernel.org/doc/html/latest
in the code documentation. The links are shorter and cleaner.
Link: https://github.com/Rust-for-Linux/linux/issues/1101
Signed-off-by: Michael Vetter <jubalh@iodoru.org>
[ Reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
When SGX is not supported by the BIOS, the kernel log contains the error
'SGX disabled by BIOS', which can be confusing since there might not be an
SGX-related option in the BIOS settings.
For the kernel it's difficult to distinguish between the BIOS not
supporting SGX and the BIOS supporting SGX but having it disabled.
Therefore, update the error message to 'SGX disabled or unsupported by
BIOS' to make it easier for those reading kernel logs to understand what's
happening.
Reported-by: Bo Wu <wubo@uniontech.com>
Co-developed-by: Zelong Xiang <xiangzelong@uniontech.com>
Signed-off-by: Zelong Xiang <xiangzelong@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/F8D977CB368423F3+20240825104653.1294624-1-wangyuli@uniontech.com
Closes: https://github.com/linuxdeepin/developer-center/issues/10032
The current assembly around swap_pages() in the relocate_kernel() takes
some time to follow because the use of registers can be easily lost when
the line of assembly goes long. Add a couple of comments to clarify the
code around swap_pages() to improve readability.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/8b52b0b8513a34b2a02fb4abb05c6700c2821475.1724573384.git.kai.huang@intel.com
When relocate_kernel() gets called, %rdi holds 'indirection_page' and
%rsi holds 'page_list'. And %rdi always holds 'indirection_page' when
swap_pages() is called.
Therefore the comment of the first line code of swap_pages()
movq %rdi, %rcx /* Put the page_list in %rcx */
.. isn't correct because it actually moves the 'indirection_page' to
the %rcx. Fix it.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/all/adafdfb1421c88efce04420fc9a996c0e2ca1b34.1724573384.git.kai.huang@intel.com
Building the SGX code with W=1 generates below warning:
arch/x86/kernel/cpu/sgx/main.c:741: warning: Function parameter or
struct member 'low' not described in 'sgx_calc_section_metric'
arch/x86/kernel/cpu/sgx/main.c:741: warning: Function parameter or
struct member 'high' not described in 'sgx_calc_section_metric'
...
The function sgx_calc_section_metric() is a simple helper which is only
used in sgx/main.c. There's no need to use kernel-doc style comment for
it.
Downgrade to a normal comment.
Signed-off-by: Kai Huang <kai.huang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240825080649.145250-1-kai.huang@intel.com
The area at the 0x0FFFD9 physical location in the PC memory space is
regular memory, traditionally ROM BIOS and more recently a copy of BIOS
code and data in RAM, write-protected.
Therefore use memremap() to get access to it rather than ioremap(),
avoiding issues in virtualization scenarios and complementing changes such
as commit f7750a7956 ("x86, mpparse, x86/acpi, x86/PCI, x86/dmi, SFI: Use
memremap() for RAM mappings") or commit 5997efb967 ("x86/boot: Use
memremap() to map the MPF and MPC data").
Reported-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/alpine.DEB.2.21.2408242025210.30766@angie.orcam.me.uk
Closes: https://lore.kernel.org/r/20240822095122.736522-1-kirill.shutemov@linux.intel.com
mtrr_bp_restore() has been removed in commit 0b9a6a8bed ("x86/mtrr: Add a
stop_machine() handler calling only cache_cpu_init()"), but the declaration
was left behind. Remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240824120234.2516830-1-cuigaosheng1@huawei.com
After a recent LLVM change that deduces __cold on functions that only call
cold code (such as __init functions), there is a section mismatch warning
from percpu_setup_exception_stacks(), which got moved to .text.unlikely. as
a result of that optimization:
WARNING: modpost: vmlinux: section mismatch in reference:
percpu_setup_exception_stacks+0x3a (section: .text.unlikely.) ->
cea_map_percpu_pages (section: .init.text)
Drop the inline keyword, which does not guarantee inlining, and replace it
with __init, as percpu_setup_exception_stacks() is only called from __init
code, which clears up the warning.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240822-x86-percpu_setup_exception_stacks-init-v1-1-57c5921b8209@kernel.org
There can be multiple role switch devices running on a platform. Given
that lockdep is not capable of differentiating between locks of
different instances, false positive warnings for circular locking are
reported. To prevent this, register unique lockdep key for each of the
individual instances.
Signed-off-by: Amit Sunil Dhamne <amitsd@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Link: https://lore.kernel.org/r/20240822223717.253433-1-amitsd@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240822130113.164644-5-liaochen4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240822130113.164644-4-liaochen4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Acked-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/20240822130113.164644-3-liaochen4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from of_device_id table.
Signed-off-by: Liao Chen <liaochen4@huawei.com>
Link: https://lore.kernel.org/r/20240822130113.164644-2-liaochen4@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace devm_clk_get() and clk_prepare_enable() with
devm_clk_get_enabled() in .probe().
Fix the bug of missing clk_disable_unprepare() in .remove() by
using devm_clk_get_enabled() that can disables and unprepares
it automatically on driver detach.
Fixes: 3c8f4ad85c ("memory/mediatek: add support for mt2701")
Cc: honghui.zhang@mediatek.com
Signed-off-by: Rong Qianfeng <rongqianfeng@vivo.com>
Reviewed-by: Yong Wu <yong.wu@mediatek.com>
Link: https://lore.kernel.org/r/20240821032558.43052-1-rongqianfeng@vivo.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
make code simpler.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-7-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use dev_err_probe() to avoid dmesg flood on actual defer. This makes
the code also simpler.
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-6-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use devm_clk_get_enabled() to drop clock prepare/unprepare parts and
make code simpler. Change to dev_err_probe() in handling clk_get_rate()
error to make it even simpler.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-5-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Use dev_err_probe() to avoid dmesg flood on actual defer. This makes
the code also simpler.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Reviewed-by: Vladimir Zapolskiy <vz@mleia.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-4-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Simplify error handling (less gotos) over locks with guard().
The driver used file-scope variable 'irq_state' for storing IRQ state
with spin_lock_irqsave, so move it into respective local scopes. This
should be equivalent, but more readable (less global variables).
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huwei.com>
Link: https://lore.kernel.org/r/20240823-b4-cleanup-h-guard-v1-2-01668915bd55@linaro.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This reverts commit 23a641d5c2.
The first-level children of the aemif node are not the device nodes (ones
containing the 'compatible' property) but the chip-select nodes which
instead have their own children.
of_platform_populate() will skip such nodes so we must indeed iterate
over the direct children of the aemif node. The problem here is that we
never call of_platform_depopulate() as it takes the root device as
argument. We only have an unpopulated chip-select nodes so we will leak
these devices if any of the calls to of_platform_populate() fails.
I don't have a batter idea right now but my patch was not correct so we
need to revert it. While at it: at least use the scoped variant of the
OF node iterator. Down the line, we should find a better solution to fix
this potential resource leak in error path.
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20240824080235.56472-1-brgl@bgdev.pl
Fixes: 23a641d5c2 ("memory: ti-aemif: don't needlessly iterate over child nodes")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Some SC7280-based boards crash when providing the "secure_non_pixel"
context bank, so allow only one iommu in the bindings also.
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
An iommu domain is allocated in venus_firmware_init() and is attached to
core->fw.dev in the same function. Use iommu_paging_domain_alloc() to
make it explicit.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/20240610085555.88197-10-baolu.lu@linux.intel.com
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace the old style single element array at the end of the struct with
a flex array.
The code does not allocate this structure, so the size change should not
be a problem.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_helper.h:1233:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The single data array data[1] is only used to save the extradata_size.
Replace it with a single element field.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_cmds.h:175:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Replace a single length element array with an element.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_cmds.h:77:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The single element array data[1] is never used. Replace it with a
padding field of the same size.
This fixes the following cocci warning:
drivers/media/platform/qcom/venus/hfi_cmds.h:146:5-9: WARNING use flexible-array member instead (https://www.kernel.org/doc/html/latest/process/deprecated.html#zero-length-and-one-element-arrays)
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Signed-off-by: Stanimir Varbanov <stanimir.k.varbanov@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
