The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, reflect that change in the related helpers.
Note that "watching" is the opposite of "in EQS", so the negation is lifted
out of the helper and into the callsites.
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
The context_tracking.state RCU_DYNTICKS subvariable has been renamed to
RCU_WATCHING, and the 'dynticks' prefix can be dropped without losing any
meaning.
While at it, flip the suffixes of these helpers. We are not telling
that we are entering dynticks mode from an RCU-task perspective anymore; we
are telling that we are exiting RCU-tasks because we are in eqs mode.
[ neeraj.upadhyay: Incorporate Frederic Weisbecker feedback. ]
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Neeraj Upadhyay <neeraj.upadhyay@kernel.org>
Convert binding doc newwork.txt to yaml format.
HDLC part:
- Convert to "fsl,ucc-hdlc.yaml".
- Add missed reg and interrupt property.
- Update example to pass build.
ethernet part:
- Convert to net/fsl,cpm-enet.yaml
- Add 0x in example, which should be hex value
- Add ref to ethernet-controller.yaml
mdio part:
- Convert to net/fsl,cpm-mdio.yaml
- Add 0x in example, which should be hex value
- Add ref to mdio.yaml
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/r/20240812165041.3815525-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
This is a supplement to commit 6d1451bf7f ("f2fs: fix to use per-inode maxbytes")
for some missed cases, also cleanup redundant code in f2fs_llseek.
Cc: Chengguang Xu <cgxu519@mykernel.net>
Signed-off-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We just need inode page when write inline data, use
f2fs_get_node_page() to get it instead of using dnode_of_data,
which can eliminate unnecessary struct use.
Signed-off-by: Zijie Wang <wangzijie1@honor.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
When we add "atgc" to the fstab table, ATGC is not immediately enabled.
There is a 7-day time threshold, and we can use "atgc_enabled" to
show whether ATGC is enabled.
Signed-off-by: liujinbao1 <liujinbao1@xiaomi.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This reverts commit c550e25bca.
Commit c550e25bca ("f2fs: use flush
command instead of FUA for zoned device") used additional flush
command to keep write order.
Since Commit dd291d77cc ("block:
Introduce zone write plugging") has enabled the block layer to
handle this order issue, there is no need to use flush command.
Signed-off-by: Wenjie Cheng <cwjhust@gmail.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Convert to use folio and related functionality.
Cc: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If lfs mode is on, buffered read may race w/ OPU dio write as below,
it may cause buffered read hits unwritten data unexpectly, and for
dio read, the race condition exists as well.
Thread A Thread B
- f2fs_file_write_iter
- f2fs_dio_write_iter
- __iomap_dio_rw
- f2fs_iomap_begin
- f2fs_map_blocks
- __allocate_data_block
- allocated blkaddr #x
- iomap_dio_submit_bio
- f2fs_file_read_iter
- filemap_read
- f2fs_read_data_folio
- f2fs_mpage_readpages
- f2fs_map_blocks
: get blkaddr #x
- f2fs_submit_read_bio
IRQ
- f2fs_read_end_io
: read IO on blkaddr #x complete
IRQ
- iomap_dio_bio_end_io
: direct write IO on blkaddr #x complete
In LFS mode, if there is inflight dio, let's wait for its completion,
this policy won't cover all race cases, however it is a tradeoff which
avoids abusing lock around IO paths.
Fixes: f847c699cf ("f2fs: allow out-place-update for direct IO in LFS mode")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
It should wait all existing dio write IOs before block removal,
otherwise, previous direct write IO may overwrite data in the
block which may be reused by other inode.
Cc: stable@vger.kernel.org
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
We may trigger high frequent checkpoint for below case:
1. mkdir /mnt/dir1; set dir1 encrypted
2. touch /mnt/file1; fsync /mnt/file1
3. mkdir /mnt/dir2; set dir2 encrypted
4. touch /mnt/file2; fsync /mnt/file2
...
Although, newly created dir and file are not related, due to
commit bbf156f7af ("f2fs: fix lost xattrs of directories"), we will
trigger checkpoint whenever fsync() comes after a new encrypted dir
created.
In order to avoid such performance regression issue, let's record an
entry including directory's ino in global cache whenever we update
directory's xattr data, and then triggerring checkpoint() only if
xattr metadata of target file's parent was updated.
This patch updates to cover below no encryption case as well:
1) parent is checkpointed
2) set_xattr(dir) w/ new xnid
3) create(file)
4) fsync(file)
Fixes: bbf156f7af ("f2fs: fix lost xattrs of directories")
Reported-by: wangzijie <wangzijie1@honor.com>
Reported-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Tested-by: Zhiguo Niu <zhiguo.niu@unisoc.com>
Reported-by: Yunlei He <heyunlei@hihonor.com>
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
The previous maintainers are no longer working on the Corstone-1000.
- Add new maintainers: Abdellatif El Khlifi, Hugues Kamba Mpiana
- Remove maintainers: Vishnu Banavath, Rui Miguel Silva
- Update contact information for existing maintainers
Signed-off-by: Hugues KAMBA MPIANA <hugues.kambampiana@arm.com>
Link: https://lore.kernel.org/r/20240815145622.377614-1-hugues.kambampiana@arm.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
The R2S Plus is basically an R2S with additional eMMC.
The eMMC configuration for the DTS has been extracted and copied from
rk3328-nanopi-r2.dts, v2017.09 branch from the friendlyarm/uboot-rockchip
repository.
Signed-off-by: Sergey Bostandzhyan <jin@mediatomb.cc>
Link: https://lore.kernel.org/r/20240814170048.23816-2-jin@mediatomb.cc
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the NanoPi R2S Plus variant, which is an R2S with eMMC.
Signed-off-by: Sergey Bostandzhyan <jin@mediatomb.cc>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240814170048.23816-3-jin@mediatomb.cc
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
AddressSanitizer found a use-after-free bug in the symbol code which
manifested as 'perf top' segfaulting.
==1238389==ERROR: AddressSanitizer: heap-use-after-free on address 0x60b00c48844b at pc 0x5650d8035961 bp 0x7f751aaecc90 sp 0x7f751aaecc80
READ of size 1 at 0x60b00c48844b thread T193
#0 0x5650d8035960 in _sort__sym_cmp util/sort.c:310
#1 0x5650d8043744 in hist_entry__cmp util/hist.c:1286
#2 0x5650d8043951 in hists__findnew_entry util/hist.c:614
#3 0x5650d804568f in __hists__add_entry util/hist.c:754
#4 0x5650d8045bf9 in hists__add_entry util/hist.c:772
#5 0x5650d8045df1 in iter_add_single_normal_entry util/hist.c:997
#6 0x5650d8043326 in hist_entry_iter__add util/hist.c:1242
#7 0x5650d7ceeefe in perf_event__process_sample /home/matt/src/linux/tools/perf/builtin-top.c:845
#8 0x5650d7ceeefe in deliver_event /home/matt/src/linux/tools/perf/builtin-top.c:1208
#9 0x5650d7fdb51b in do_flush util/ordered-events.c:245
#10 0x5650d7fdb51b in __ordered_events__flush util/ordered-events.c:324
#11 0x5650d7ced743 in process_thread /home/matt/src/linux/tools/perf/builtin-top.c:1120
#12 0x7f757ef1f133 in start_thread nptl/pthread_create.c:442
#13 0x7f757ef9f7db in clone3 ../sysdeps/unix/sysv/linux/x86_64/clone3.S:81
When updating hist maps it's also necessary to update the hist symbol
reference because the old one gets freed in map__put().
While this bug was probably introduced with 5c24b67aae ("perf
tools: Replace map->referenced & maps->removed_maps with map->refcnt"),
the symbol objects were leaked until c087e9480c ("perf machine:
Fix refcount usage when processing PERF_RECORD_KSYMBOL") was merged so
the bug was masked.
Fixes: c087e9480c ("perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL")
Reported-by: Yunzhao Li <yunzhao@cloudflare.com>
Signed-off-by: Matt Fleming (Cloudflare) <matt@readmodwrite.com>
Cc: Ian Rogers <irogers@google.com>
Cc: kernel-team@cloudflare.com
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: stable@vger.kernel.org # v5.13+
Link: https://lore.kernel.org/r/20240815142212.3834625-1-matt@readmodwrite.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Disable bit 29 of SCLKGATE_DIS register around pps sequence
when we turn panel power on.
--v2
-Squash two commit together [Jani]
-Use IS_DISPLAY_VER [Jani]
-Fix multiline comment [Jani]
--v3
-Define register in a more appropriate place [Mitul]
--v4
-Register is already defined no need to define it again [Ville]
-Use correct WA number (lineage no.) [Dnyaneshwar]
-Fix the range on which this WA is applied [Dnyaneshwar]
Bspec: 49304
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813042807.4015214-1-suraj.kandpal@intel.com
Remove unnecessary line feed for tasdevice_dsp_create_ctrls,
and remove two unnecessary spaces in tas2563_digital_gain_get
and tas2563_digital_gain_put.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240815042138.1997-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add MODULE_DEVICE_TABLE(), so modules could be properly autoloaded
based on the alias from platform_device_id table.
Fixes: 9d8a7be88b ("ASoC: amd: acp: Add legacy sound card support for Chrome audio")
Signed-off-by: Yuntao Liu <liuyuntao12@huawei.com>
Link: https://patch.msgid.link/20240815084923.756476-1-liuyuntao12@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We are checking cp_irq_count from the wrong hdcp structure which
ends up giving timed out errors. We only increment the cp_irq_count
of the primary connector's hdcp structure but here in case of
multidisplay setup we end up checking the secondary connector's hdcp
structure, which will not have its cp_irq_count incremented. This leads
to a timed out at CP_IRQ error even though a CP_IRQ was raised. Extract
it from the correct intel_hdcp structure.
--v2
-Explain why it was the wrong hdcp structure [Jani]
Fixes: 8c9e4f68b8 ("drm/i915/hdcp: Use per-device debugs")
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809114127.3940699-2-suraj.kandpal@intel.com
re-enumerating full-speed devices after a failed address device command
can trigger a NULL pointer dereference.
Full-speed devices may need to reconfigure the endpoint 0 Max Packet Size
value during enumeration. Usb core calls usb_ep0_reinit() in this case,
which ends up calling xhci_configure_endpoint().
On Panther point xHC the xhci_configure_endpoint() function will
additionally check and reserve bandwidth in software. Other hosts do
this in hardware
If xHC address device command fails then a new xhci_virt_device structure
is allocated as part of re-enabling the slot, but the bandwidth table
pointers are not set up properly here.
This triggers the NULL pointer dereference the next time usb_ep0_reinit()
is called and xhci_configure_endpoint() tries to check and reserve
bandwidth
[46710.713538] usb 3-1: new full-speed USB device number 5 using xhci_hcd
[46710.713699] usb 3-1: Device not responding to setup address.
[46710.917684] usb 3-1: Device not responding to setup address.
[46711.125536] usb 3-1: device not accepting address 5, error -71
[46711.125594] BUG: kernel NULL pointer dereference, address: 0000000000000008
[46711.125600] #PF: supervisor read access in kernel mode
[46711.125603] #PF: error_code(0x0000) - not-present page
[46711.125606] PGD 0 P4D 0
[46711.125610] Oops: Oops: 0000 [#1] PREEMPT SMP PTI
[46711.125615] CPU: 1 PID: 25760 Comm: kworker/1:2 Not tainted 6.10.3_2 #1
[46711.125620] Hardware name: Gigabyte Technology Co., Ltd.
[46711.125623] Workqueue: usb_hub_wq hub_event [usbcore]
[46711.125668] RIP: 0010:xhci_reserve_bandwidth (drivers/usb/host/xhci.c
Fix this by making sure bandwidth table pointers are set up correctly
after a failed address device command, and additionally by avoiding
checking for bandwidth in cases like this where no actual endpoints are
added or removed, i.e. only context for default control endpoint 0 is
evaluated.
Reported-by: Karel Balej <balejk@matfyz.cz>
Closes: https://lore.kernel.org/linux-usb/D3CKQQAETH47.1MUO22RTCH2O3@matfyz.cz/
Cc: stable@vger.kernel.org
Fixes: 651aaf36a7 ("usb: xhci: Handle USB transaction error on address command")
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240815141117.2702314-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In order to avoid potential memory leaks if new error paths are added
without a call to of_node_put(), use for_each_child_of_node_scoped()
instead of for_each_child_of_node(). The former automatically decrements
the refcount when the child goes out of scope, which removes the need
for explicit calls to of_node_put().
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.kernel.org/project/dri-devel/patch/20240624-mtk_disp_ovl_adaptor_scoped-v1-3-9fa1e074d881@gmail.com/
Signed-off-by: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Having two methods to wait on GT TLB invalidations is not ideal. Remove
xe_gt_tlb_invalidation_wait and only use GT TLB invalidation fences.
In addition to two methods being less than ideal, once GT TLB
invalidations are coalesced the seqno cannot be assigned during
xe_gt_tlb_invalidation_ggtt/range. Thus xe_gt_tlb_invalidation_wait
would not have a seqno to wait one. A fence however can be armed and
later signaled.
v3:
- Add explaination about coalescing to commit message
v4:
- Don't put dma fence if defined on stack (CI)
v5:
- Initialize ret to zero (CI)
v6:
- Use invalidation_fence_signal helper in tlb timeout (Matthew Auld)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719172905.1527927-3-matthew.brost@intel.com
(cherry picked from commit 61ac035361)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Other layers should not be touching struct xe_gt_tlb_invalidation_fence
directly, add helper for initialization.
v2:
- Add dma_fence_get and list init to xe_gt_tlb_invalidation_fence_init
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719172905.1527927-2-matthew.brost@intel.com
(cherry picked from commit a522b285c6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When validating VF config on the media GT, we may wrongly report
that VF is already partially configured on it, as we consider GGTT
and LMEM provisioning done on the primary GT (since both GGTT and
LMEM are tile-level resources, not a GT-level).
This will cause skipping a VF auto-provisioning on the media-GT and
in result will block a VF from successfully initialize that GT.
Fix that by considering GGTT and LMEM configurations only when
checking if a VF provisioning is complete, and omit GGTT and LMEM
when reporting empty/partial provisioning.
Fixes: 234670cea9 ("drm/xe/pf: Skip fair VFs provisioning if already provisioned")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806180516.618-1-michal.wajdeczko@intel.com
(cherry picked from commit 5bdacb0907)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Take PM ref when any G2H are outstanding, drop when none are
outstanding.
To safely ensure we have PM ref when in the GuC CT layer, a PM ref needs
to be held when scheduler messages are pending too.
v2:
- Add outer PM protections to xe_file_close (CI)
v3:
- Only take PM ref 0->1 and drop on 1->0 (Matthew Auld)
v4:
- Add assert to G2H increment function
v5:
- Rebase
v6:
- Declare xe as local variable in xe_file_close (CI)
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240719172905.1527927-5-matthew.brost@intel.com
(cherry picked from commit d930c19fdf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We should use the number of actual entries stored in the runtime
register buffer, not the maximum number of entries that this buffer
can hold, otherwise bsearch() may fail and we may miss the data and
wrongly report unexpected access to some registers.
Fixes: 4edadc41a3 ("drm/xe/vf: Use register values obtained from the PF")
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718203155.486-1-michal.wajdeczko@intel.com
(cherry picked from commit ad16682db1)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
xe_file_close triggers an asynchronous queue cleanup and then frees up
the xef object. Since queue cleanup flushes all pending jobs and the KMD
stores client usage stats into the xef object after jobs are flushed, we
see a use-after-free for the xef object. Resolve this by taking a
reference to xef from xe_exec_queue.
While at it, revert an earlier change that contained a partial work
around for this issue.
v2:
- Take a ref to xef even for the VM bind queue (Matt)
- Squash patches relevant to that fix and work around (Lucas)
v3: Fix typo (Lucas)
Fixes: ce62827bc2 ("drm/xe: Do not access xe file when updating exec queue run_ticks")
Fixes: 6109f24f87 ("drm/xe: Add helper to accumulate exec queue runtime")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/issues/1908
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-5-umesh.nerlige.ramappa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 2149ded630)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Take a reference to xef when user creates the VM and put the reference
when user destroys the VM.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-4-umesh.nerlige.ramappa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit a2387e6949)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
In order to make xe_file ref counted, move destruction of xe_file
members to a helper.
v2: Move xe_vm_close_and_put back into xe_file_close (Matt)
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240718210548.3580382-2-umesh.nerlige.ramappa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 3d0c4a62cc)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fail invalid addresses during user fence creation.
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240717140429.1396820-1-matthew.brost@intel.com
(cherry picked from commit 0fde907da2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
rt_mutex_handle_deadlock() is called with rt_mutex::wait_lock held. In the
good case it returns with the lock held and in the deadlock case it emits a
warning and goes into an endless scheduling loop with the lock held, which
triggers the 'scheduling in atomic' warning.
Unlock rt_mutex::wait_lock in the dead lock case before issuing the warning
and dropping into the schedule for ever loop.
[ tglx: Moved unlock before the WARN(), removed the pointless comment,
massaged changelog, added Fixes tag ]
Fixes: 3d5c9340d1 ("rtmutex: Handle deadlock detection smarter")
Signed-off-by: Roland Xu <mu001999@outlook.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/ME0P300MB063599BEF0743B8FA339C2CECC802@ME0P300MB0635.AUSP300.PROD.OUTLOOK.COM
When the target context passed to enter_vmid_context() matches the
current running context, the function returns early without manipulating
the registers of the stage-2 MMU. This can result in a stale VMID due to
the lack of an ISB instruction in exit_vmid_context() after writing the
VTTBR when ARM64_WORKAROUND_SPECULATIVE_AT is not enabled.
For example, with pKVM enabled:
// Initially running in host context
enter_vmid_context(guest);
-> __load_stage2(guest); isb // Writes VTCR & VTTBR
exit_vmid_context(guest);
-> __load_stage2(host); // Restores VTCR & VTTBR
enter_vmid_context(host);
-> Returns early as we're already in host context
tlbi vmalls12e1is // !!! Can use the stale VMID as we
// haven't performed context
// synchronisation since restoring
// VTTBR.VMID
Add an unconditional ISB instruction to exit_vmid_context() after
restoring the VTTBR. This already existed for the
ARM64_WORKAROUND_SPECULATIVE_AT path, so we can simply hoist that onto
the common path.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Cc: Fuad Tabba <tabba@google.com>
Fixes: 58f3b0fc3b ("KVM: arm64: Support TLB invalidation in guest context")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240814123429.20457-3-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
When initialising the nVHE hypervisor, we invalidate potentially stale
TLB entries for the EL1&0 regime using a 'vmalls12e1' invalidation.
However, this invalidation operation applies only to the active VMID
and therefore we could proceed with stale TLB entries for other VMIDs.
Replace the operation with an 'alle1' which applies to all entries for
the EL1&0 regime, regardless of the VMID.
Cc: Marc Zyngier <maz@kernel.org>
Cc: Oliver Upton <oliver.upton@linux.dev>
Fixes: 1025c8c0c6 ("KVM: arm64: Wrap the host with a stage 2")
Signed-off-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20240814123429.20457-2-will@kernel.org
Signed-off-by: Marc Zyngier <maz@kernel.org>
Allow boot instances to use memory reserved by the reserve_mem boot
option.
reserve_mem=12M:4096:trace trace_instance=boot_mapped@trace
The above will allocate 12 megs with 4096 alignment and label it "trace".
The second parameter will create a "boot_mapped" instance and use the
memory reserved and labeled as "trace" as the memory for the ring buffer.
That will create an instance called "boot_mapped":
/sys/kernel/tracing/instances/boot_mapped
Note, because the ring buffer is using a defined memory ranged, it will
act just like a memory mapped ring buffer. It will not have a snapshot
buffer, as it can't swap out the buffer. The snapshot files as well as any
tracers that uses a snapshot will not be present in the boot_mapped
instance.
Also note that reserve_mem is not reliable in acquiring the same physical
memory at each soft reboot. It is possible that KALSR could map the kernel
at the previous boot memory location forcing the reserve_mem to return a
different memory location. In this case, the previous ring buffer will be
lost.
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ross Zwisler <zwisler@google.com>
Cc: Vincent Donnefort <vdonnefort@google.com>
Link: https://lore.kernel.org/20240815082811.669f7d8c@gandalf.local.home
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
for_each_child_of_node_scoped() can put the device_node automatically.
So let's use it to make the code simpler by avoiding the need to
explicitly call of_node_put().
Signed-off-by: Zhang Zekun <zhangzekun11@huawei.com>
Link: https://lore.kernel.org/r/20240810023426.110624-1-zhangzekun11@huawei.com
Signed-off-by: Niklas Cassel <cassel@kernel.org>
-----BEGIN PGP SIGNATURE-----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=H17I
-----END PGP SIGNATURE-----
Merge tag 'nf-24-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Ignores ifindex for types other than mcast/linklocal in ipv6 frag
reasm, from Tom Hughes.
2) Initialize extack for begin/end netlink message marker in batch,
from Donald Hunter.
3) Initialize extack for flowtable offload support, also from Donald.
4) Dropped packets with cloned unconfirmed conntracks in nfqueue,
later it should be possible to explore lookup after reinject but
Florian prefers this approach at this stage. From Florian Westphal.
5) Add selftest for cloned unconfirmed conntracks in nfqueue for
previous update.
6) Audit after filling netlink header successfully in object dump,
from Phil Sutter.
7-8) Fix concurrent dump and reset which could result in underflow
counter / quota objects.
netfilter pull request 24-08-15
* tag 'nf-24-08-15' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: Add locking for NFT_MSG_GETOBJ_RESET requests
netfilter: nf_tables: Introduce nf_tables_getobj_single
netfilter: nf_tables: Audit log dump reset after the fact
selftests: netfilter: add test for br_netfilter+conntrack+queue combination
netfilter: nf_queue: drop packets with cloned unconfirmed conntracks
netfilter: flowtable: initialise extack before use
netfilter: nfnetlink: Initialise extack before use in ACKs
netfilter: allow ipv6 fragments to arrive on different devices
====================
Link: https://patch.msgid.link/20240814222042.150590-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
pci_request_regions is called to apply for PCI I/O and memory resources
when the driver is initialized, Therefore, when the driver is uninstalled,
pci_release_regions should be used to release PCI I/O and memory resources
instead of pci_release_mem_regions is used to release memory reasouces
only.
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When query reg inf of SSU, it loops tnl_num times. However, tnl_num comes
from hardware and the length of array is a fixed value. To void array out
of bound, make sure the loop time is not greater than the length of array
Signed-off-by: Peiyang Wang <wangpeiyang1@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When config TC during the reset process, may cause a deadlock, the flow is
as below:
pf reset start
│
▼
......
setup tc │
│ ▼
▼ DOWN: napi_disable()
napi_disable()(skip) │
│ │
▼ ▼
...... ......
│ │
▼ │
napi_enable() │
▼
UINIT: netif_napi_del()
│
▼
......
│
▼
INIT: netif_napi_add()
│
▼
...... global reset start
│ │
▼ ▼
UP: napi_enable()(skip) ......
│ │
▼ ▼
...... napi_disable()
In reset process, the driver will DOWN the port and then UINIT, in this
case, the setup tc process will UP the port before UINIT, so cause the
problem. Adds a DOWN process in UINIT to fix it.
Fixes: bb6b94a896 ("net: hns3: Add reset interface implementation in client")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
