This error handling has a typo. It should i++ instead of i--. In the
original code the error handling will loop until it crashes.
Fixes: da70d184a8 ("net: ethernet: ti: am65-cpsw: Introduce multi queue Rx")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Link: https://patch.msgid.link/8e7960cc-415d-48d7-99ce-f623022ec7b5@stanley.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Just like rtl8211f_led_hw_is_supported() and
rtl8211f_led_hw_control_set(), the rtl8211f_led_hw_control_get() also
needs to check the index value, otherwise the caller is likely to get
an incorrect rules.
Fixes: 17784801d8 ("net: phy: realtek: Add support for PHY LEDs on RTL8211F")
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Link: https://patch.msgid.link/20240927114610.1278935-1-hui.wang@canonical.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The include.sh file is generated for inclusion and should not be executable.
Otherwise, it will be added to kselftest-list.txt. Additionally, add the
executable bit for test.py at the same time to ensure proper functionality.
Fixes: 3ade6ce125 ("selftests: rds: add testing infrastructure")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20240927041349.81216-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Detect tcp gso fraglist skbs with corrupted geometry (see below) and
pass these to skb_segment instead of skb_segment_list, as the first
can segment them correctly.
Valid SKB_GSO_FRAGLIST skbs
- consist of two or more segments
- the head_skb holds the protocol headers plus first gso_size
- one or more frag_list skbs hold exactly one segment
- all but the last must be gso_size
Optional datapath hooks such as NAT and BPF (bpf_skb_pull_data) can
modify these skbs, breaking these invariants.
In extreme cases they pull all data into skb linear. For TCP, this
causes a NULL ptr deref in __tcpv4_gso_segment_list_csum at
tcp_hdr(seg->next).
Detect invalid geometry due to pull, by checking head_skb size.
Don't just drop, as this may blackhole a destination. Convert to be
able to pass to regular skb_segment.
Approach and description based on a patch by Willem de Bruijn.
Link: https://lore.kernel.org/netdev/20240428142913.18666-1-shiming.cheng@mediatek.com/
Link: https://lore.kernel.org/netdev/20240922150450.3873767-1-willemdebruijn.kernel@gmail.com/
Fixes: bee88cd5bd ("net: add support for segmenting TCP fraglist GSO packets")
Cc: stable@vger.kernel.org
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20240926085315.51524-1-nbd@nbd.name
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()
- MGMT: Fix possible crash on mgmt_index_removed
- L2CAP: Fix uaf in l2cap_connect
- Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE
-----BEGIN PGP SIGNATURE-----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=/6ai
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()
- MGMT: Fix possible crash on mgmt_index_removed
- L2CAP: Fix uaf in l2cap_connect
- Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE
* tag 'for-net-2024-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: hci_event: Align BR/EDR JUST_WORKS paring with LE
Bluetooth: btmrvl: Use IRQF_NO_AUTOEN flag in request_irq()
Bluetooth: L2CAP: Fix uaf in l2cap_connect
Bluetooth: MGMT: Fix possible crash on mgmt_index_removed
====================
Link: https://patch.msgid.link/20240927145730.2452175-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stefan Schmidt says:
====================
pull-request: ieee802154 for net 2024-09-27
Jinjie Ruan added the use of IRQF_NO_AUTOEN in the mcr20a driver and fixed
and addiotinal build dependency problem while doing so.
Jiawei Ye, ensured a correct RCU handling in mac802154_scan_worker.
* tag 'ieee802154-for-net-2024-09-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wpan/wpan:
net: ieee802154: mcr20a: Use IRQF_NO_AUTOEN flag in request_irq()
mac802154: Fix potential RCU dereference issue in mac802154_scan_worker
ieee802154: Fix build error
====================
Link: https://patch.msgid.link/20240927094351.3865511-1-stefan@datenfreihafen.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQqUNBr3gm4hGXdBJlZ7Krx/gZQ6wUCZv3NAgAKCRBZ7Krx/gZQ
68kbAP0YzQxUgl0/o7Soda8XwKSPZTM9ls6kRk1UHTTG/i4ZigEA/G+i/mBQctL0
AB911kK8mxfXppfOXzstFBjoJSqiigQ=
=IE7D
-----END PGP SIGNATURE-----
Merge tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull generic unaligned.h cleanups from Al Viro:
"Get rid of architecture-specific <asm/unaligned.h> includes, replacing
them with a single generic <linux/unaligned.h> header file.
It's the second largest (after asm/io.h) class of asm/* includes, and
all but two architectures actually end up using exact same file.
Massage the remaining two (arc and parisc) to do the same and just
move the thing to from asm-generic/unaligned.h to linux/unaligned.h"
[ This is one of those things that we're better off doing outside the
merge window, and would only cause extra conflict noise if it was in
linux-next for the next release due to all the trivial #include line
updates. Rip off the band-aid. - Linus ]
* tag 'pull-work.unaligned' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
move asm/unaligned.h to linux/unaligned.h
arc: get rid of private asm/unaligned.h
parisc: get rid of private asm/unaligned.h
asm/unaligned.h is always an include of asm-generic/unaligned.h;
might as well move that thing to linux/unaligned.h and include
that - there's nothing arch-specific in that header.
auto-generated by the following:
for i in `git grep -l -w asm/unaligned.h`; do
sed -i -e "s/asm\/unaligned.h/linux\/unaligned.h/" $i
done
for i in `git grep -l -w asm-generic/unaligned.h`; do
sed -i -e "s/asm-generic\/unaligned.h/linux\/unaligned.h/" $i
done
git mv include/asm-generic/unaligned.h include/linux/unaligned.h
git mv tools/include/asm-generic/unaligned.h tools/include/linux/unaligned.h
sed -i -e "/unaligned.h/d" include/asm-generic/Kbuild
sed -i -e "s/__ASM_GENERIC/__LINUX/" include/linux/unaligned.h tools/include/linux/unaligned.h
Declarations local to arch/*/kernel/*.c are better off *not* in a public
header - arch/arc/kernel/unaligned.h is just fine for those
bits.
Unlike the parisc case, here we have an extra twist - asm/mmu.h
has an implicit dependency on struct pt_regs, and in some users
that used to be satisfied by include of asm/ptrace.h from
asm/unaligned.h (note that asm/mmu.h itself did _not_ pull asm/unaligned.h
- it relied upon the users having pulled asm/unaligned.h before asm/mmu.h
got there).
Seeing that asm/mmu.h only wants struct pt_regs * arguments in
an extern, just pre-declare it there - less brittle that way.
With that done _all_ asm/unaligned.h instances are reduced to include
of asm-generic/unaligned.h and can be removed - unaligned.h is in
mandatory-y in include/asm-generic/Kbuild.
What's more, we can move asm-generic/unaligned.h to linux/unaligned.h
and switch includes of <asm/unaligned.h> to <linux/unaligned.h>; that's
better off as an auto-generated commit, though, to be done by Linus
at -rc1 time next cycle.
Acked-by: Vineet Gupta <vgupta@kernel.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
-----BEGIN PGP SIGNATURE-----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=8cfY
-----END PGP SIGNATURE-----
Merge tag 'hid-for-linus-2024090201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fix from Benjamin Tissoires:
- A small fix from the new HID-BPF code.
The HID-BPF CI started failing completely because the BPF tree is now
stricter, exposing a problem in the hid_bpf_ops.
* tag 'hid-for-linus-2024090201' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: bpf: fix cfi stubs for hid_bpf_ops
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped temporarily
because its detection routine is too greedy and mis-identifies devices
from other vendors as PixArt devices.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCZv0LRAAKCRBAj56VGEWX
nM7OAP495t23Ay4H7qBnVEv4KHrOkNLwebKudwcokjWQAdnOPgEAu0GfslScWdrO
yYofhsjrph1V2dQOWqoLnd1C4iiHVgA=
=HQCS
-----END PGP SIGNATURE-----
Merge tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
- a couple fixups for adp5589-keys driver
- recently added driver for PixArt PS/2 touchpads is dropped
temporarily because its detection routine is too greedy and
mis-identifies devices from other vendors as PixArt devices
* tag 'input-for-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: adp5589-keys - fix adp5589_gpio_get_value()
Input: adp5589-keys - fix NULL pointer dereference
Revert "Input: Add driver for PixArt PS/2 touchpad"
- add new options that enable restart or panic on I/O errors
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRnH8MwLyZDhyYfesYTAyx9YGnhbQUCZv1YFxQcbXBhdG9ja2FA
cmVkaGF0LmNvbQAKCRATAyx9YGnhbTXKAQD29bvBnFN69zYYvrX3X7fHy6o/eOxU
oZJbFpvA2G+NigD+McEsLzOvOE1ZC/okkB/UUfju/ChEvACIgsNXGkPK2Ag=
=ygvr
-----END PGP SIGNATURE-----
Merge tag 'for-6.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mikulas Patocka:
"Revert the patch that made dm-verity restart or panic on I/O errors,
and instead add new explicit options for people who want that
behavior"
* tag 'for-6.12/dm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm-verity: introduce the options restart_on_error and panic_on_error
Revert: "dm-verity: restart or panic on an I/O error"
- Add support for the FS_IOC_GETFSSYSFSPATH ioctl.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCZvu6SQAKCRDdoc3SxdoY
dk/OAQD0wLQqxdrRFe3sbcgVnqKrGxBa59Pj2jQwy70bM9kN4QEAowFKia7PxiFH
JZ20Z1a6om/ksjYouKuYc3QR+yRFkgE=
=vZIR
-----END PGP SIGNATURE-----
Merge tag 'zonefs-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs update from Damien Le Moal:
- Add support for the FS_IOC_GETFSSYSFSPATH ioctl
* tag 'zonefs-6.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
zonefs: add support for FS_IOC_GETFSSYSFSPATH
After dividing up a proposed write into subrequests, netfslib sets
NETFS_RREQ_ALL_QUEUED to indicate to the collector that it can move on to
the final cleanup once it has emptied the subrequest queues.
Now, whilst the collector will normally end up running at least once after
this bit is set just because it takes a while to process all the write
subrequests before the collector runs out of subrequests, there exists the
possibility that the issuing thread will be forced to sleep and the
collector thread will clean up all the subrequests before ALL_QUEUED gets
set.
In such a case, the collector thread will not get triggered again and will
never clear NETFS_RREQ_IN_PROGRESS thus leaving a request uncompleted and
causing a potential futute hang.
Fix this by scheduling the write collector if all the subrequest queues are
empty (and thus no writes pending issuance).
Note that we'd do this ideally before queuing the subrequest, but in the
case of buffered writeback, at least, we can't find out that we've run out
of folios until after we've called writeback_iter() and it has returned
NULL - at which point we might not actually have any subrequests still
under construction.
Fixes: 288ace2f57 ("netfs: New writeback implementation")
Signed-off-by: David Howells <dhowells@redhat.com>
Link: https://lore.kernel.org/r/3317784.1727880350@warthog.procyon.org.uk
cc: Jeff Layton <jlayton@kernel.org>
cc: netfs@lists.linux.dev
cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
This patch introduces the options restart_on_error and panic_on_error on
dm-verity.
Previously, restarting on error was handled by the patch
e6a3531dd5, but Google engineers wanted to
have a special option for it.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Will Drewry <wad@chromium.org>
This reverts commit e6a3531dd5.
The problem that the commit e6a3531dd5
fixes was reported as a security bug, but Google engineers working on
Android and ChromeOS didn't want to change the default behavior, they
want to get -EIO rather than restarting the system, so I am reverting
that commit.
Note also that calling machine_restart from the I/O handling code is
potentially unsafe (the reboot notifiers may wait for the bio that
triggered the restart), but Android uses the reboot notifiers to store
the reboot reason into the PMU microcontroller, so machine_restart must
be used.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Fixes: e6a3531dd5 ("dm-verity: restart or panic on an I/O error")
Suggested-by: Sami Tolvanen <samitolvanen@google.com>
Suggested-by: Will Drewry <wad@chromium.org>
new_dir does *NOT* point into dir_folio - it's an inode, not a pointer
to ufs directory entry.
Fixes: 516b97cf03 "ufs: Convert directory handling to kmap_local"
Acked-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Declarations local to arch/*/kernel/*.c are better off *not* in a public
header - arch/parisc/kernel/unaligned.h is just fine for those
bits.
With that done parisc asm/unaligned.h is reduced to include
of asm-generic/unaligned.h and can be removed - unaligned.h is in
mandatory-y in include/asm-generic/Kbuild.
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Starting with upstream Rust commit a5e3a3f9b6bd ("move
`manual_c_str_literals` to complexity"), to be released in Rust 1.83.0
[1], Clippy now warns on `manual_c_str_literals` by default, e.g.:
error: manually constructing a nul-terminated string
--> rust/kernel/kunit.rs:21:13
|
21 | b"\x013%pA\0".as_ptr() as _,
| ^^^^^^^^^^^^^ help: use a `c""` literal: `c"\x013%pA"`
|
= help: for further information visit https://rust-lang.github.io/rust-clippy/master/index.html#manual_c_str_literals
= note: `-D clippy::manual-c-str-literals` implied by `-D warnings`
= help: to override `-D warnings` add `#[allow(clippy::manual_c_str_literals)]`
Apply the suggestion to clean up the warnings.
Link: https://github.com/rust-lang/rust-clippy/pull/13263 [1]
Reviewed-by: Trevor Gross <tmgross@umich.edu>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/20240927164414.560906-1-ojeda@kernel.org
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use struct_size() to calculate the number of bytes to allocate for a
new message.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add the __counted_by_le compiler attribute to the flexible array member
Chunks to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Change the data type of the flexible array member Chunks from __u8[] to
struct srv_copychunk[] for ChunkCount to match the number of elements in
the Chunks array. (With __u8[], each srv_copychunk would occupy 24 array
entries and the __counted_by compiler attribute wouldn't be applicable.)
Use struct_size() to calculate the size of the copychunk_ioctl_req.
Read Chunks[0] after checking that ChunkCount is not 0.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Use struct_size() to calculate the output buffer length.
Signed-off-by: Thorsten Blum <thorsten.blum@linux.dev>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The adp5589 seems to have the same behavior as similar devices as
explained in commit 910a9f5636 ("Input: adp5588-keys - get value from
data out when dir is out").
Basically, when the gpio is set as output we need to get the value from
ADP5589_GPO_DATA_OUT_A register instead of ADP5589_GPI_STATUS_A.
Fixes: 9d2e173644 ("Input: ADP5589 - new driver for I2C Keypad Decoder and I/O Expander")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-2-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
We register a devm action to call adp5589_clear_config() and then pass
the i2c client as argument so that we can call i2c_get_clientdata() in
order to get our device object. However, i2c_set_clientdata() is only
being set at the end of the probe function which means that we'll get a
NULL pointer dereference in case the probe function fails early.
Fixes: 30df385e35 ("Input: adp5589-keys - use devm_add_action_or_reset() for register clear")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20241001-b4-dev-adp5589-fw-conversion-v1-1-fca0149dfc47@analog.com
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Regression Description:
Depending on the options specified for the GRE tunnel device, small
packets may be dropped. This occurs because the pskb_network_may_pull
function fails due to the packet's insufficient length.
For example, if only the okey option is specified for the tunnel device,
original (before encapsulation) packets smaller than 28 bytes (including
the IPv4 header) will be dropped. This happens because the required
length is calculated relative to the network header, not the skb->head.
Here is how the required length is computed and checked:
* The pull_len variable is set to 28 bytes, consisting of:
* IPv4 header: 20 bytes
* GRE header with Key field: 8 bytes
* The pskb_network_may_pull function adds the network offset, shifting
the checkable space further to the beginning of the network header and
extending it to the beginning of the packet. As a result, the end of
the checkable space occurs beyond the actual end of the packet.
Instead of ensuring that 28 bytes are present in skb->head, the function
is requesting these 28 bytes starting from the network header. For small
packets, this requested length exceeds the actual packet size, causing
the check to fail and the packets to be dropped.
This issue affects both locally originated and forwarded packets in
DMVPN-like setups.
How to reproduce (for local originated packets):
ip link add dev gre1 type gre ikey 1.9.8.4 okey 1.9.8.4 \
local <your-ip> remote 0.0.0.0
ip link set mtu 1400 dev gre1
ip link set up dev gre1
ip address add 192.168.13.1/24 dev gre1
ip neighbor add 192.168.13.2 lladdr <remote-ip> dev gre1
ping -s 1374 -c 10 192.168.13.2
tcpdump -vni gre1
tcpdump -vni <your-ext-iface> 'ip proto 47'
ip -s -s -d link show dev gre1
Solution:
Use the pskb_may_pull function instead the pskb_network_may_pull.
Fixes: 80d875cfc9 ("ipv4: ip_gre: Avoid skb_pull() failure in ipgre_xmit()")
Signed-off-by: Anton Danilov <littlesmilingcloud@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240924235158.106062-1-littlesmilingcloud@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This reverts commit 740ff03d72 because
current PixArt detection is too greedy and claims devices that are
not PixArt.
Reported-by: Benjamin Tissoires <bentiss@kernel.org>
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2314756
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Increase the timeout for checking the busy bit of the VLAN Tag register
from 10µs to 500ms. This change is necessary to accommodate scenarios
where Energy Efficient Ethernet (EEE) is enabled.
Overnight testing revealed that when EEE is active, the busy bit can
remain set for up to approximately 300ms. The new 500ms timeout provides
a safety margin.
Fixes: ed64639bc1 ("net: stmmac: Add support for VLAN Rx filtering")
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shenwei Wang <shenwei.wang@nxp.com>
Link: https://patch.msgid.link/20240924205424.573913-1-shenwei.wang@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
iter_folioq_get_pages() decides to advance to the next folioq slot when
it has reached the end of the current folio. However, it is checking
offset, which is the beginning of the current part, instead of
iov_offset, which is adjusted to the end of the current part, so it
doesn't advance the slot when it's supposed to. As a result, on the next
iteration, we'll use the same folio with an out-of-bounds offset and
return an unrelated page.
This manifested as various crashes and other failures in 9pfs in drgn's
VM testing setup and BPF CI.
Fixes: db0aa2e956 ("mm: Define struct folio_queue and ITER_FOLIOQ to handle a sequence of folios")
Link: https://lore.kernel.org/linux-fsdevel/20240923183432.1876750-1-chantr4@gmail.com/
Tested-by: Manu Bretelle <chantr4@gmail.com>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/cbaf141ba6c0e2e209717d02746584072844841a.1727722269.git.osandov@fb.com
Tested-by: Eduard Zingerman <eddyz87@gmail.com>
Tested-by: Leon Romanovsky <leon@kernel.org>
Tested-by: Joey Gouly <joey.gouly@arm.com>
Acked-by: David Howells <dhowells@redhat.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Eric Dumazet says:
====================
net: two fixes for qdisc_pkt_len_init()
Inspired by one syzbot report.
At least one qdisc (fq_codel) depends on qdisc_skb_cb(skb)->pkt_len
having a sane value (not zero)
With the help of af_packet, syzbot was able to fool qdisc_pkt_len_init()
to precisely set qdisc_skb_cb(skb)->pkt_len to zero.
First patch fixes this issue.
Second one (a separate one to help future bisections) adds
more sanity check to SKB_GSO_DODGY users.
====================
Link: https://patch.msgid.link/20240924150257.1059524-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
One path takes care of SKB_GSO_DODGY, assuming
skb->len is bigger than hdr_len.
virtio_net_hdr_to_skb() does not fully dissect TCP headers,
it only make sure it is at least 20 bytes.
It is possible for an user to provide a malicious 'GSO' packet,
total length of 80 bytes.
- 20 bytes of IPv4 header
- 60 bytes TCP header
- a small gso_size like 8
virtio_net_hdr_to_skb() would declare this packet as a normal
GSO packet, because it would see 40 bytes of payload,
bigger than gso_size.
We need to make detect this case to not underflow
qdisc_skb_cb(skb)->pkt_len.
Fixes: 1def9238d4 ("net_sched: more precise pkt_len computation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The number of register fields cannot be assumed to be ALE_FIELDS_MAX
as some platforms can have lesser fields.
Solve this by embedding the actual number of fields available
in platform data and use that instead of ALE_FIELDS_MAX.
Gets rid of the below warning on BeagleBone Black
[ 1.007735] WARNING: CPU: 0 PID: 33 at drivers/base/regmap/regmap.c:1208 regmap_field_init+0x88/0x9c
[ 1.007802] invalid empty mask defined
[ 1.007812] Modules linked in:
[ 1.007842] CPU: 0 UID: 0 PID: 33 Comm: kworker/u4:3 Not tainted 6.11.0-01459-g508403ab7b74-dirty #840
[ 1.007867] Hardware name: Generic AM33XX (Flattened Device Tree)
[ 1.007890] Workqueue: events_unbound deferred_probe_work_func
[ 1.007935] Call trace:
[ 1.007957] unwind_backtrace from show_stack+0x10/0x14
[ 1.007999] show_stack from dump_stack_lvl+0x50/0x64
[ 1.008033] dump_stack_lvl from __warn+0x70/0x124
[ 1.008077] __warn from warn_slowpath_fmt+0x194/0x1a8
[ 1.008113] warn_slowpath_fmt from regmap_field_init+0x88/0x9c
[ 1.008154] regmap_field_init from devm_regmap_field_alloc+0x48/0x64
[ 1.008193] devm_regmap_field_alloc from cpsw_ale_create+0xfc/0x320
[ 1.008251] cpsw_ale_create from cpsw_init_common+0x214/0x354
[ 1.008286] cpsw_init_common from cpsw_probe+0x4ac/0xb88
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/netdev/CAMuHMdUf-tKRDzkz2_m8qdFTFutefddU0NTratVrEjRTzA3yQQ@mail.gmail.com/
Fixes: 11cbcfeaa7 ("net: ethernet: ti: cpsw_ale: use regfields for number of Entries and Policers")
Signed-off-by: Roger Quadros <rogerq@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240924-am65-cpsw-multi-rx-fix-v1-1-0ca3fa9a1398@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
There is no need to ask the user about enabling Microchip FDMA
functionality, as all drivers that use it select the FDMA symbol.
Hence make the symbol invisible, unless when compile-testing.
Fixes: 30e48a75df ("net: microchip: add FDMA library")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Link: https://patch.msgid.link/8e2bcd8899c417a962b7ee3f75b29f35b25d7933.1727171879.git.geert+renesas@glider.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On link-state change, the controller gets reset,
which clears all PTP registers, including PHC time,
calibrated clock correction values etc. For correct
IEEE 1588 operation we need to restore these after
the reset.
Fixes: 6605b730c0 ("FEC: Add time stamping code and a PTP hardware clock")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Reviewed-by: Wei Fang <wei.fang@nxp.com>
Link: https://patch.msgid.link/20240924093705.2897329-2-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
On link state change, the controller gets reset,
causing PPS to drop out. Re-enable PPS if it was
enabled before the controller reset.
Fixes: 6605b730c0 ("FEC: Add time stamping code and a PTP hardware clock")
Signed-off-by: Csókás, Bence <csokas.bence@prolan.hu>
Link: https://patch.msgid.link/20240924093705.2897329-1-csokas.bence@prolan.hu
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The value is read from the register TXGBE_RX_GEN_CTL3, and it should be
written back to TXGBE_RX_GEN_CTL3 when it changes some fields.
Cc: stable@vger.kernel.org
Fixes: f629acc6f2 ("net: pcs: xpcs: support to switch mode for Wangxun NICs")
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reported-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/20240924022857.865422-1-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When applying padding, the buffer is not zeroed, which results in memory
disclosure. The mentioned data is observed on the wire. This patch uses
skb_put_padto() to pad Ethernet frames properly. The mentioned function
zeroes the expanded buffer.
In case the packet cannot be padded it is silently dropped. Statistics
are also not incremented. This driver does not support statistics in the
old 32-bit format or the new 64-bit format. These will be added in the
future. In its current form, the patch should be easily backported to
stable versions.
Ethernet MACs on Amazon-SE and Danube cannot do padding of the packets
in hardware, so software padding must be applied.
Fixes: 504d4721ee ("MIPS: Lantiq: Add ethernet driver")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240923214949.231511-2-olek2@wp.pl
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit 24ab059d2e ("net: check dev->gso_max_size in gso_features_check()")
added a dev->gso_max_size test to gso_features_check() in order to fall
back to GSO when needed.
This was added as it was noticed that some drivers could misbehave if TSO
packets get too big. However, the check doesn't respect dev->gso_ipv4_max_size
limit. For instance, a device could be configured with BIG TCP for IPv4,
but not IPv6.
Therefore, add a netif_get_gso_max_size() equivalent to netif_get_gro_max_size()
and use the helper to respect both limits before falling back to GSO engine.
Fixes: 24ab059d2e ("net: check dev->gso_max_size in gso_features_check()")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240923212242.15669-2-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add a small netif_get_gro_max_size() helper which returns the maximum IPv4
or IPv6 GRO size of the netdevice.
We later add a netif_get_gso_max_size() equivalent as well for GSO, so that
these helpers can be used consistently instead of open-coded checks.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20240923212242.15669-1-daniel@iogearbox.net
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Alexander Sverdlin presents 2 problems during shutdown with the
lan9303 driver. One is specific to lan9303 and the other just happens
to reproduce there.
The first problem is that lan9303 is unique among DSA drivers in that it
calls dev_get_drvdata() at "arbitrary runtime" (not probe, not shutdown,
not remove):
phy_state_machine()
-> ...
-> dsa_user_phy_read()
-> ds->ops->phy_read()
-> lan9303_phy_read()
-> chip->ops->phy_read()
-> lan9303_mdio_phy_read()
-> dev_get_drvdata()
But we never stop the phy_state_machine(), so it may continue to run
after dsa_switch_shutdown(). Our common pattern in all DSA drivers is
to set drvdata to NULL to suppress the remove() method that may come
afterwards. But in this case it will result in an NPD.
The second problem is that the way in which we set
dp->conduit->dsa_ptr = NULL; is concurrent with receive packet
processing. dsa_switch_rcv() checks once whether dev->dsa_ptr is NULL,
but afterwards, rather than continuing to use that non-NULL value,
dev->dsa_ptr is dereferenced again and again without NULL checks:
dsa_conduit_find_user() and many other places. In between dereferences,
there is no locking to ensure that what was valid once continues to be
valid.
Both problems have the common aspect that closing the conduit interface
solves them.
In the first case, dev_close(conduit) triggers the NETDEV_GOING_DOWN
event in dsa_user_netdevice_event() which closes user ports as well.
dsa_port_disable_rt() calls phylink_stop(), which synchronously stops
the phylink state machine, and ds->ops->phy_read() will thus no longer
call into the driver after this point.
In the second case, dev_close(conduit) should do this, as per
Documentation/networking/driver.rst:
| Quiescence
| ----------
|
| After the ndo_stop routine has been called, the hardware must
| not receive or transmit any data. All in flight packets must
| be aborted. If necessary, poll or wait for completion of
| any reset commands.
So it should be sufficient to ensure that later, when we zeroize
conduit->dsa_ptr, there will be no concurrent dsa_switch_rcv() call
on this conduit.
The addition of the netif_device_detach() function is to ensure that
ioctls, rtnetlinks and ethtool requests on the user ports no longer
propagate down to the driver - we're no longer prepared to handle them.
The race condition actually did not exist when commit 0650bf52b3
("net: dsa: be compatible with masters which unregister on shutdown")
first introduced dsa_switch_shutdown(). It was created later, when we
stopped unregistering the user interfaces from a bad spot, and we just
replaced that sequence with a racy zeroization of conduit->dsa_ptr
(one which doesn't ensure that the interfaces aren't up).
Reported-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Closes: https://lore.kernel.org/netdev/2d2e3bba17203c14a5ffdabc174e3b6bbb9ad438.camel@siemens.com/
Closes: https://lore.kernel.org/netdev/c1bf4de54e829111e0e4a70e7bd1cf523c9550ff.camel@siemens.com/
Fixes: ee534378f0 ("net: dsa: fix panic when DSA master device unbinds on shutdown")
Reviewed-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20240913203549.3081071-1-vladimir.oltean@nxp.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
- When sched_ext is in bypass mode (e.g. while disabling the BPF scheduler),
it was using one DSQ to implement global FIFO scheduling as all it has to
do is guaranteeing reasonable forward progress. On multi-socket machines,
this can lead to live-lock conditions under certain workloads. Fixed by
splitting the queue used for FIFO scheduling per NUMA node. This required
several preparation patches.
- Hotplug tests on powerpc could reliably trigger deadlock while enabling a
BPF scheduler. This was caused by cpu_hotplug_lock nesting inside
scx_fork_rwsem and then CPU hotplug path trying to fork a new thread while
holding cpu_hotplug_lock. Fixed by restructuring locking in enable and
disable paths so that the two locks are not coupled. This required several
preparation patches which also fixed a couple other issues in the enable
path.
- A build fix for !CONFIG_SMP.
- Userspace tooling sync and updates.
-----BEGIN PGP SIGNATURE-----
iIQEABYKACwWIQTfIjM1kS57o3GsC/uxYfJx3gVYGQUCZvsB8A4cdGpAa2VybmVs
Lm9yZwAKCRCxYfJx3gVYGW0cAP9LWESwNvszp0jDglg8kvS6tyHDLNQYLT99Dy4Q
NPE1OgD+KUKXuRBOhT3dc9dbwodmPtX2rq36QIgHhoGiPB9hew8=
=NH+o
-----END PGP SIGNATURE-----
Merge tag 'sched_ext-for-6.12-rc1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext
Pull sched_ext fixes from Tejun Heo:
- When sched_ext is in bypass mode (e.g. while disabling the BPF
scheduler), it was using one DSQ to implement global FIFO scheduling
as all it has to do is guaranteeing reasonable forward progress.
On multi-socket machines, this can lead to live-lock conditions under
certain workloads. Fixed by splitting the queue used for FIFO
scheduling per NUMA node. This required several preparation patches.
- Hotplug tests on powerpc could reliably trigger deadlock while
enabling a BPF scheduler.
This was caused by cpu_hotplug_lock nesting inside scx_fork_rwsem and
then CPU hotplug path trying to fork a new thread while holding
cpu_hotplug_lock.
Fixed by restructuring locking in enable and disable paths so that
the two locks are not coupled. This required several preparation
patches which also fixed a couple other issues in the enable path.
- A build fix for !CONFIG_SMP
- Userspace tooling sync and updates
* tag 'sched_ext-for-6.12-rc1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
sched_ext: Remove redundant p->nr_cpus_allowed checker
sched_ext: Decouple locks in scx_ops_enable()
sched_ext: Decouple locks in scx_ops_disable_workfn()
sched_ext: Add scx_cgroup_enabled to gate cgroup operations and fix scx_tg_online()
sched_ext: Enable scx_ops_init_task() separately
sched_ext: Fix SCX_TASK_INIT -> SCX_TASK_READY transitions in scx_ops_enable()
sched_ext: Initialize in bypass mode
sched_ext: Remove SCX_OPS_PREPPING
sched_ext: Relocate check_hotplug_seq() call in scx_ops_enable()
sched_ext: Use shorter slice while bypassing
sched_ext: Split the global DSQ per NUMA node
sched_ext: Relocate find_user_dsq()
sched_ext: Allow only user DSQs for scx_bpf_consume(), scx_bpf_dsq_nr_queued() and bpf_iter_scx_dsq_new()
scx_flatcg: Use a user DSQ for fallback instead of SCX_DSQ_GLOBAL
tools/sched_ext: Receive misc updates from SCX repo
sched_ext: Add __COMPAT helpers for features added during v6.12 devel cycle
sched_ext: Build fix for !CONFIG_SMP
- uprobes: fix kernel info leak via "[uprobes]" vma
Fix uprobes not to expose the uninitialized page for trampoline
buffer to user space, which can leak kernel info.
-----BEGIN PGP SIGNATURE-----
iQFOBAABCgA5FiEEh7BulGwFlgAOi5DV2/sHvwUrPxsFAmb6yK4bHG1hc2FtaS5o
aXJhbWF0c3VAZ21haWwuY29tAAoJENv7B78FKz8bME4H9ivH3PKLYd4tlz5WYBD6
EhcMhvlOVv6rD/l3LVZuh81o+TkObypWOaIVMeMJOTxWv0wEIYsNuQy/jzYWMB6L
gQpdrQtVb79kk0flf8feeZYebwNgCM7tOkq/dFaZJSDYd7Cb6QW4jroeSLs1oYFK
fulA4Tq2wrQwPpxF8docYZiBPpkz62uICP9eS0X2BUlWjzzHeDRny6uO0DW7SfJc
knNRmFZYPyW5Fovd4MF0iyaUMRduTt6B9bvtasu52F4WzwCyG2r7scm6UDAEJiV7
O77+Xq55KkkoZy3+xlZPQgyE1i/Uer5hX735dppu2CPQvhgZGfflNYNQUUUcGegu
/w==
=kLlc
-----END PGP SIGNATURE-----
Merge tag 'probes-fixes-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probes fix from Masami Hiramatsu:
- uprobes: fix kernel info leak via "[uprobes]" vma
Fix uprobes not to expose the uninitialized page for trampoline
buffer to user space, which can leak kernel info.
* tag 'probes-fixes-v6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
uprobes: fix kernel info leak via "[uprobes]" vma
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCZvqoUgAKCRCRxhvAZXjc
oveLAQC952BB+giATJvX5lPz400g+MoDVlWiPdqAVbF0PCGRRwEA+/7TedOfOkQx
Df3iAzDXVbX/WvWYdZ/DyLp/r44WHAw=
=tGkE
-----END PGP SIGNATURE-----
Merge tag 'vfs-6.12-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs fixes from Christian Brauner:
"afs:
- Fix setting of the server responding flag
- Remove unused struct afs_address_list and afs_put_address_list()
function
- Fix infinite loop because of unresponsive servers
- Ensure that afs_retry_request() function is correctly added to the
afs_req_ops netfs operations table
netfs:
- Fix netfs_folio tracepoint handling to handle NULL mappings
- Add a missing folio_queue API documentation
- Ensure that netfs_write_folio() correctly advances the iterator via
iov_iter_advance()
- Fix a dentry leak during concurrent cull and cookie lookup
operations in cachefiles
pidfs:
- Correctly handle accessing another task's pid namespace"
* tag 'vfs-6.12-rc2.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
netfs: Fix the netfs_folio tracepoint to handle NULL mapping
netfs: Add folio_queue API documentation
netfs: Advance iterator correctly rather than jumping it
afs: Fix the setting of the server responding flag
afs: Remove unused struct and function prototype
afs: Fix possible infinite loop with unresponsive servers
pidfs: check for valid pid namespace
afs: Fix missing wire-up of afs_retry_request()
cachefiles: fix dentry leak in cachefiles_open_file()
