Update l2tp to remove the inline keyword from several functions in C
sources, since this is now discouraged.
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
l2tp no longer uses sk_user_data in tunnel sockets and now manages
tunnel/session lifetimes slightly differently. Update docs to cover
this.
CC: linux-doc@vger.kernel.org
CC: corbet@lwn.net
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
since dr_mode = "otg" can be used for USB gadget functions for U-Boot
and Linux, there is no reason to set it to "peripheral". drop it.
Fixes: 1a5c8d307c ("arm64: dts: rockchip: Add Radxa ZERO 3W/3E")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
Link: https://lore.kernel.org/r/20240802051508.498-1-naoki@radxa.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Increase the frequency of the PWM signal that drives the LED backlight of
the Pinebook Pro's panel, from about 1.35 KHz (which equals to the PWM
period of 740,740 ns), to exactly 8 kHz (which equals to the PWM period of
125,000 ns). Using a higher PWM frequency for the panel backlight, which
reduces the flicker, can only be beneficial to the end users' eyes.
On top of that, increasing the backlight PWM signal frequency reportedly
eliminates the buzzing emitted from the Pinebook Pro's built-in speakers
when certain backlight levels are set, which cause some weird interference
with some of the components of the Pinebook Pro's audio chain.
The old value for the backlight PWM period, i.e. 740,740 ns, is pretty much
an arbitrary value that was selected during the very early bring-up of the
Pinebook Pro, only because that value seemed to minimize horizontal line
distortion on the display, which resulted from the old X.org drivers causing
screen tearing when dragging windows around. That's no longer an issue, so
there are no reasons to stick with the old PWM period value.
The lower and the upper backlight PWM frequency limits for the Pinebook Pro's
panel, according to its datasheet, are 200 Hz and 10 kHz, respectively. [1]
These changes still leave some headroom, which may have some positive effects
on the lifetime expectancy of the panel's backlight LEDs.
[1] https://files.pine64.org/doc/datasheet/PinebookPro/NV140FHM-N49_Rev.P0_20160804_201710235838.pdf
Fixes: 5a65505a69 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Cc: stable@vger.kernel.org
Reported-by: Nikola Radojevic <nikola@radojevic.rs>
Signed-off-by: Dragan Simic <dsimic@manjaro.org>
Tested-by: Nikola Radojević <nikola@radojevic.rs>
Link: https://lore.kernel.org/r/2a23b6cfd8c0513e5b233b4006ee3d3ed09b824f.1722805655.git.dsimic@manjaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
During Linux graceful reboot, the GPIO interrupts are not disabled.
Since the drivers are not removed during graceful reboot,
the logic to call mlxbf3_gpio_irq_disable() is not triggered.
Interrupts that remain enabled can cause issues on subsequent boots.
For example, the mlxbf-gige driver contains PHY logic to bring up the link.
If the gpio-mlxbf3 driver loads first, the mlxbf-gige driver
will use a GPIO interrupt to bring up the link.
Otherwise, it will use polling.
The next time Linux boots and loads the drivers in this order, we encounter the issue:
- mlxbf-gige loads first and uses polling while the GPIO10
interrupt is still enabled from the previous boot. So if
the interrupt triggers, there is nothing to clear it.
- gpio-mlxbf3 loads.
- i2c-mlxbf loads. The interrupt doesn't trigger for I2C
because it is shared with the GPIO interrupt line which
was not cleared.
The solution is to add a shutdown function to the GPIO driver to clear and disable
all interrupts. Also clear the interrupt after disabling it in mlxbf3_gpio_irq_disable().
Fixes: 38a700efc5 ("gpio: mlxbf3: Add gpio driver support")
Signed-off-by: Asmaa Mnebhi <asmaa@nvidia.com>
Reviewed-by: David Thompson <davthompson@nvidia.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240611171509.22151-1-asmaa@nvidia.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Current definition of the davinci gpio controller doesn't include the
gpio-reserved-ranges property. Add the gpio-reserved-ranges property
so it can be used within device tree files.
Will prevent users from trying to access gpios that don't exist.
Signed-off-by: Jared McArthur <j-mcarthur@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240809154638.394091-2-j-mcarthur@ti.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Cool Pi CM5 GenBook works as a carrier board connect with CM5 [0].
Specification:
- Rockchip RK3588
- LPDDR5X 8/32 GB
- eMMC 64 GB
- HDMI Type A out x 1
- USB 3.0 Host x 1
- USB-C 3.0 with DisplayPort AltMode
- PCIE M.2 E Key for RTL8852BE Wireless connection
- PCIE M.2 M Key for NVME connection
- eDP panel with 1920x1080
This patch add basic support to bringup eMMC/USB HOST/WiFi/TouchPad/
Battery/PCIE NVME, and can also drive a HDMI output with out of tree
hdmi patches.
[0] https://www.crowdsupply.com/shenzhen-tianmao-technology-co-ltd/genbook-rk3588
Signed-off-by: Andy Yan <andyshrk@163.com>
Link: https://lore.kernel.org/r/20240730102433.540260-3-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add Cool Pi CM5 GenBook, a laptop powered by RK3588.
Cool Pi GenBook works with a carrier board connect with CM5.
Signed-off-by: Andy Yan <andyshrk@163.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20240730102433.540260-2-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This follows the same logic as 82d40b141a ("arm64: dts: rockchip: add
rfkill node for M.2 Key E WiFi on rock-5b").
On the orangepi-5-plus, there's also a GPIO pin connecting the WiFi
enable signal inside the M.2 Key E slot.
The exact GPIO PIN can be validated in the Armbian rk-5.10-rkr4 kernel
rk3588-orangepi-5-plus.dtsi file [1], which contains a `wifi_disable`
node referencing RK_PC4 on &gpio0.
With this change, I was able to get a "Intel Corporation Wi-Fi
6E(802.11ax) AX210/AX1675* 2x2 [Typhoon Peak] (rev 1a)" up, while
`rfkill` previously only mentioned to be hardware blocked.
[1] 9fbe23c9da/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
Signed-off-by: Florian Klink <flokli@flokli.de>
Link: https://lore.kernel.org/r/20240808103052.1894764-1-flokli@flokli.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
- Two minor fixes for recent changes
-----BEGIN PGP SIGNATURE-----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=YX9E
-----END PGP SIGNATURE-----
Merge tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux
Pull nfsd fixes from Chuck Lever:
- Two minor fixes for recent changes
* tag 'nfsd-6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux:
nfsd: don't set SVC_SOCK_ANONYMOUS when creating nfsd sockets
sunrpc: avoid -Wformat-security warning
SMBusAlert handling in the I2C core gets two fixes. One to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour. The I2C header gets a
compilation fix is ACPI is enabled but I2C isn't. The testunit gets a
rename in the code to match the documentation.
Two fixes on the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out.
-----BEGIN PGP SIGNATURE-----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=M+Mo
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
- Two fixes for SMBusAlert handling in the I2C core: one to avoid an
endless loop when scanning for handlers and one to make sure handlers
are always called even if HW has broken behaviour
- I2C header build fix for when ACPI is enabled but I2C isn't
- The testunit gets a rename in the code to match the documentation
- Two fixes for the Qualcomm GENI I2C controller are cleaning up the
error exit patch in the runtime_resume() function. The first is
disabling the clock, the second disables the icc on the way out
* tag 'i2c-for-6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: testunit: match HostNotify test name with docs
i2c: qcom-geni: Add missing geni_icc_disable in geni_i2c_runtime_resume
i2c: qcom-geni: Add missing clk_disable_unprepare in geni_i2c_runtime_resume
i2c: Fix conditional for substituting empty ACPI functions
i2c: smbus: Send alert notifications to all devices if source not found
i2c: smbus: Improve handling of stuck alerts
- avoid a deadlock with dma-debug and netconsole (Rik van Riel)
-----BEGIN PGP SIGNATURE-----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=tNDn
-----END PGP SIGNATURE-----
Merge tag 'dma-mapping-6.11-2024-08-10' of git://git.infradead.org/users/hch/dma-mapping
Pull dma-mapping fix from Christoph Hellwig:
- avoid a deadlock with dma-debug and netconsole (Rik van Riel)
* tag 'dma-mapping-6.11-2024-08-10' of git://git.infradead.org/users/hch/dma-mapping:
dma-debug: avoid deadlock between dma debug vs printk and netconsole
- fix a bug that was causing ACLs to seemingly "disappear"
- new on disk format version, bcachefs_metadata_version_disk_accounting_v3
bcachefs_metadata_version_disk_accounting_v2 accidentally included
padding in disk_accounting_key; fortunately, 6.11 isn't out yet so we
can fix this with another version bump.
-----BEGIN PGP SIGNATURE-----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=f3fR
-----END PGP SIGNATURE-----
Merge tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefs
Pull more bcachefs fixes from Kent Overstreet:
"A couple last minute fixes for the new disk accounting
- fix a bug that was causing ACLs to seemingly "disappear"
- new on disk format version, bcachefs_metadata_version_disk_accounting_v3
bcachefs_metadata_version_disk_accounting_v2 accidentally included
padding in disk_accounting_key; fortunately, 6.11 isn't out yet so
we can fix this with another version bump"
* tag 'bcachefs-2024-08-10' of git://evilpiepirate.org/bcachefs:
bcachefs: bcachefs_metadata_version_disk_accounting_v3
bcachefs: improve bch2_dev_usage_to_text()
bcachefs: bch2_accounting_invalid()
bcachefs: Switch to .get_inode_acl()
Recent compilers support __has_attribute() to check if a certain
compiler attribute is supported.
Unfortunately we have to first check if __has_attribute is supported in
the first place and then if a specific attribute is present.
These two checks can't be folded into a single condition as that would
lead to errors.
Nesting the two conditions like below works, but becomes ugly as soon
as #else blocks are used as those need to be duplicated for both levels
of #if.
#if defined __has_attribute
# if __has_attribute (nonnull)
# define ATTR_NONNULL __attribute__ ((nonnull))
# endif
#endif
Introduce a new helper which makes the usage of __has_attribute() nicer
and migrate the current user to it.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-4-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
As mentioned in the comment, the workaround for
__attribute__((no_stack_protector)) is only necessary on GCC.
Avoid applying the workaround on clang, as clang does not recognize
__attribute__((__optimize__)) and would fail.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-3-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
The MIPS calling convention requires the address of the current function
to be available in $t9.
This was not done so far.
For GCC this seems to have worked, but when compiled with clang the
executable segfault instantly.
Properly load the address of _start_c() into $t9 before calling it.
Acked-by: Willy Tarreau <w@1wt.eu>
Link: https://lore.kernel.org/r/20240807-nolibc-llvm-v2-2-c20f2f5fc7c2@weissschuh.net
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.
While at it make adis16460_debugfs_init() void as the return code is
ignored.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-4-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.
While at it make adis16400_debugfs_init() void as the return code is
ignored.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-3-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IS_ENABLED(CONFIG_DEBUG_FS) to return in case debugfs is not present.
Since this is known at compile time, it allows the compiler to drop any
unused code. Therefore no need to wrap the code with #ifdef.
While at it make adis16480_debugfs_init() void as the return code is
ignored.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-2-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Use IS_ENABLED(CONFIG_DEBUG_FS) to return early in case debugfs is not
present. Since this is known at compile time, it allows the compiler to
drop any unused code. Therefore no need to wrap the code with #ifdef.
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240809-dev-adis-debugfs-improv-v1-1-d3adb6996518@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This error path was intended to return, and not just print an error. The
current code will lead to an error pointer dereference.
Fixes: 371f778b83 ("iio: adc: add support for pac1921")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Acked-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/1fa4ab12-0939-477d-bc92-306fd32e4fd9@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
This comparison should be >= ARRAY_SIZE() instead of >. The "mspan"
variable is later used as an array index into ltc2664_mspan_lut[] so
this is an off by one bug.
Fixes: 4cc2fc445d ("iio: dac: ltc2664: Add driver for LTC2664 and LTC2672")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/5727ab54-6280-466e-b107-1b6006e5ab29@stanley.mountain
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Prevent triggers from stop working after the device has entered sleep:
use iio_device_suspend_triggering and iio_device_resume_triggering helpers.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20240807185619.7261-3-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
When a machine enters a sleep state while a trigger is associated to
an iio device that trigger is not resumed after exiting the sleep state:
provide iio device drivers a way to suspend and resume
the associated trigger to solve the aforementioned bug.
Each iio driver supporting external triggers is expected to call
iio_device_suspend_triggering before suspending,
and iio_device_resume_triggering upon resuming.
Signed-off-by: Denis Benato <benato.denis96@gmail.com>
Link: https://patch.msgid.link/20240807185619.7261-2-benato.denis96@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add rockchip,rk3576-saradc compatible string.
The saradc on RK3576 is compatible with the one on RK3588, so they are
used together in an arm of the oneOf.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20240802214612.434179-5-detlev.casanova@collabora.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Proximity and gesture offset registers perform offset correction to
improve cross-talk performance. Added `calibbias` to the proximity
and gesture channels.
Provided facility to set calibbias based on the channel number.
Signed-off-by: Abhash Jha <abhashkumarjha123@gmail.com>
Link: https://patch.msgid.link/20240804134212.51682-2-abhashkumarjha123@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add scaling support to STM32 DFSDM.
When used in an analog context, a DFSDM filter typically converts the data
from a sigma delta modulator. The IIO device associated to the DFSDM
filter provides these data as raw data.
The IIO device can provide scaling information (voltage and offset) to
allow conversion of raw data into physical values.
With the new binding based on IIO backend framework, the sigma delta
modulators are defined as backends providing scaling information.
The scaling is not supported with legacy binding.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Acked-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-10-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The legacy sd modulator driver registers the sigma delta modulator as
an IIO channel provider. This implementation is not convenient when the
SD modulator has to be cascaded with another IIO device. The scaling
information is distributed across devices, which makes it difficult to
report consistent scaling data on IIO devices.
The solution is to expose these cascaded IIO devices as an aggregate
device, which report global scaling information.
Add IIO backend support to SD modulator to allow scaling information
management.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20240730084640.1307938-9-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Move to generic channels binding to ease new backend framework adoption
and prepare the convergence with MDF IP support on STM32MP2 SoC family.
Legacy binding:
DFSDM is an IIO channel consumer.
SD modulator is an IIO channels provider.
The channel phandles are provided in DT through io-channels property
and channel indexes through st,adc-channels property.
New binding:
DFSDM is an IIO channel provider.
The channel indexes are given by reg property in channel child node.
This new binding is intended to be used with SD modulator IIO backends.
It does not support SD modulator legacy IIO devices.
The st,adc-channels property presence is used to discriminate
between legacy and backend bindings.
The support of the DFSDM legacy channels and SD modulator IIO devices
is kept for backward compatibility.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Link: https://patch.msgid.link/20240730084640.1307938-8-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Allow to specify the reference voltage used by the SD modulator.
When the SD modulator is defined as an IIO backend, the reference
voltage can be used to evaluate scaling information of the IIO device.
The reference voltage is not used otherwise.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240730084640.1307938-7-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The legacy sd modulator driver registers the sigma delta modulator as
an IIO channel provider. This implementation is not convenient when the
SD modulator has to be cascaded with another IIO device. The scaling
information is distributed across devices, which makes it difficult to
report consistent scaling data on IIO devices.
The solution is to expose these cascaded IIO devices as an aggregate
device, which report global scaling information.
Add IIO backend support to SD modulator to allow scaling information
management.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240730084640.1307938-6-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Change the DFSDM binding to use the new IIO backend framework,
along with the adoption of IIO generic channels.
This binding change allows to add scaling support to the DFSDM.
Keep the legacy binding as deprecated for backward compatibility.
The io-backends property is supported only in generic IIO channel
binding.
- Channel description with the generic binding (Audio and Analog):
Properties superseded by generic properties:
st,adc-channels: becomes "reg" property in channel node
st,adc-channel-names: becomes "label" property in channel node
Properties moved to channel child node:
st,adc-channel-types: becomes st,adc-channel-type
st,adc-channel-clk-src, st,adc-alt-channel
- Analog binding:
DFSDM filter channel is configured as an IIO backend consumer.
Add io-backends property in channel child nodes.
DFSDM is no more configured as a channel consumer from SD modulator.
Use of io-channels in DFSDM node is deprecated.
- Audio binding:
DFSDM audio DAI is configured as a channel consumer from DFSDM filter.
No change compare to legacy.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240730084640.1307938-5-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add an API to support IIO generic channels binding:
http://devicetree.org/schemas/iio/adc/adc.yaml#
This new API is needed, as generic channel DT node isn't populated as a
device.
Add devm_iio_backend_fwnode_get() to allow an IIO device backend
consumer to reference backend phandles in its child nodes.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-4-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add iio_backend_disable() and iio_backend_enable() APIs to allow
IIO backend consumer to request backend disabling and enabling.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-3-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add iio_backend_read_scale() and iio_backend_read_offset() services
to read channel scale and offset from an IIO backbend device.
Also add a read_raw callback which replicates the read_raw callback of
the IIO framework, and is intended to request miscellaneous channel
attributes from the backend device.
Both scale and offset helpers use this callback.
Signed-off-by: Olivier Moysan <olivier.moysan@foss.st.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240730084640.1307938-2-olivier.moysan@foss.st.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.
Drop the AK09916 vendorless compatible.
Fixes: 76e28aa97f ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20240806053016.6401-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
All compatibles in this binding without prefixes were deprecated, so
adding a new deprecated one after some time is not allowed, because it
defies the core logic of deprecating things.
Drop the AK09916 vendorless compatible.
Fixes: 76e28aa97f ("iio: magnetometer: ak8975: add AK09116 support")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20240806053016.6401-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Trivial cleanup in __iio_format_value() for the IIO_VAL_FRACTIONAL case
where tmp1 = vals[1] assignment is unneeded and irrelevant since tmp1 is
immediately overwritten by the subsequent div_s64_rem() call.
Signed-off-by: Matteo Martelli <matteomartelli3@gmail.com>
Link: https://patch.msgid.link/20240730-iio-clean-fmt-value-v1-1-3e1c3deafc33@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
wpa_supplicant 2.11 sends since 1efdba5fdc2c ("Handle PMKSA flush in the
driver for SAE/OWE offload cases") SSID based PMKSA del commands.
brcmfmac is not prepared and tries to dereference the NULL bssid and
pmkid pointers in cfg80211_pmksa. PMKID_V3 operations support SSID based
updates so copy the SSID.
Fixes: a96202acae ("wifi: brcmfmac: cfg80211: Add support for PMKID_V3 operations")
Cc: stable@vger.kernel.org # 6.4.x
Signed-off-by: Janne Grunau <j@jannau.net>
Reviewed-by: Neal Gompa <neal@gompa.dev>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240803-brcmfmac_pmksa_del_ssid-v1-1-4e85f19135e1@jannau.net
The recent addition of a sanity check for a too low start tick time
seems breaking some applications that uses aloop with a certain slave
timer setup. They may have the initial resolution 0, hence it's
treated as if it were a too low value.
Relax and skip the check for the slave timer instance for addressing
the regression.
Fixes: 4a63bd179f ("ALSA: timer: Set lower bound of start tick time")
Cc: <stable@vger.kernel.org>
Link: https://github.com/raspberrypi/linux/issues/6294
Link: https://patch.msgid.link/20240810084833.10939-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit 6fd166aae7 ("x86/mm: Use/Fix PCID to optimize user/kernel
switches") removed the last usage of CR3_HW_ASID_BITS and opted to use
X86_CR3_PCID_BITS instead. Remove CR3_HW_ASID_BITS.
Signed-off-by: Yosry Ahmed <yosryahmed@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240425215951.2310105-1-yosryahmed@google.com
The section 4.5.2 of the RISC-V AIA specification says that "any write
to a sourcecfg register of an APLIC might (or might not) cause the
corresponding interrupt-pending bit to be set to one if the rectified
input value is high (= 1) under the new source mode."
When the interrupt type is changed in the sourcecfg register, the APLIC
device might not set the corresponding pending bit, so the interrupt might
never become pending.
To handle sourcecfg register changes for level-triggered interrupts in MSI
mode, manually set the pending bit for retriggering interrupt so it gets
retriggered if it was already asserted.
Fixes: ca8df97fe6 ("irqchip/riscv-aplic: Add support for MSI-mode")
Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/all/20240809071049.2454-1-yongxuan.wang@sifive.com
