Currently ampdu_factor is wrongly calculated in ath12k_peer_assoc_h_he(), fix it.
This is found during code review.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240710021819.87216-1-quic_bqiang@quicinc.com
struct wmi_pdev_bss_chan_info_event is not similar to the firmware
struct definition, this will cause some random failures.
Fix by matching the struct wmi_pdev_bss_chan_info_event with the
firmware structure definition.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240331183232.2158756-3-quic_kathirve@quicinc.com
Currently, the firmware returns incorrect pdev_id information in
WMI_PDEV_BSS_CHAN_INFO_EVENTID, leading to incorrect filling of
the pdev's survey information.
To prevent this issue, when requesting BSS channel information
through WMI_PDEV_BSS_CHAN_INFO_REQUEST_CMDID, firmware expects
pdev_id as one of the arguments in this WMI command.
Add pdev_id to the struct wmi_pdev_bss_chan_info_req_cmd and fill it
during ath12k_wmi_pdev_bss_chan_info_request(). This resolves the
issue of sending the correct pdev_id in WMI_PDEV_BSS_CHAN_INFO_EVENTID.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Fixes: d889913205 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices")
Signed-off-by: P Praneesh <quic_ppranees@quicinc.com>
Signed-off-by: Karthikeyan Kathirvel <quic_kathirve@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240331183232.2158756-2-quic_kathirve@quicinc.com
During PCI based hardware device start up, ASPM is disabled for all. And
once firmware is ready, it is restored back. However, not all hardwares
(for example QCN9274) supports ASPM. Hence there is a need to conditionally
restore ASPM back. Or else, for such hardwares, issue can be seen during
sending and receiving packets.
Introduce a new hardware param supports_aspm which identifies whether a
given hardware supports ASPM or not and then accordingly restore it.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Aditya Kumar Singh <quic_adisi@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240709055817.3371406-1-quic_adisi@quicinc.com
We should not be checking the return values from debugfs creation at all: the
debugfs functions are designed to handle errors of previously called functions
and just transparently abort the creation of debugfs entries when debugfs is
disabled. If we check the return value and abort driver initialisation, we break
the driver if debugfs is disabled (such as when booting with debugfs=off).
Earlier versions of ath9k accidentally did the right thing by checking the
return value, but only for NULL, not for IS_ERR(). This was "fixed" by the two
commits referenced below, breaking ath9k with debugfs=off starting from the 6.6
kernel (as reported in the Bugzilla linked below).
Restore functionality by just getting rid of the return value check entirely.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219122
Fixes: 1e4134610d ("wifi: ath9k: use IS_ERR() with debugfs_create_dir()")
Fixes: 6edb4ba6fb ("wifi: ath9k: fix parameter check in ath9k_init_debug()")
Reported-by: Daniel Tobias <dan.g.tob@gmail.com>
Tested-by: Daniel Tobias <dan.g.tob@gmail.com>
Signed-off-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240805110225.19690-1-toke@toke.dk
Using devm_gpio_request_one() is simpler as then we don't need to call
gpio_free().
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240731210312.7622-1-rosenp@gmail.com
In commit a78a8da51b ("drm/ttm: replace busy placement with flags v6"),
__i915_ttm_get_pages was updated to use flags instead of the separate
'busy' placement list. However, the behaviour was subtly changed.
Originally, the function would attempt to use the preferred placement
without eviction, and give an opportunity to restart the operation
before falling back to allowing eviction.
This was unintentionally changed, as the preferred placement was not
given the TTM_PL_FLAG_DESIRED flag, and so eviction could be triggered
in that first pass. This caused thrashing, and a significant performance
regression on DG2 systems with small BAR. For example, Minecraft and
Team Fortress 2 would drop to single-digit framerates.
Restore the original behaviour by marking the initial placement as
desired on that first attempt. Also, rework this to use a separate
struct ttm_palcement, as the individual placements are marked 'const',
so hot-patching the flags is even more dodgy than before.
Thanks to Justin Brewer for bisecting this.
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-3-david@davidgow.net
(cherry picked from commit 92653f2a57)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In commit a78a8da51b ("drm/ttm: replace busy placement with flags v6"),
the old system of having a separate placement list (for placements
which should be used without eviction) and a 'busy' placement list (for
placements which should be attempted if eviction is required) was
replaced with a new one where placements could be marked 'FALLBACK' (to
be attempted if eviction is required) or 'DESIRED' (to be attempted
first, but not if eviction is required).
i915 had always included the requested placement in the list of
'busy' placements: i.e., the placement could be used either if eviction
is required or not. But when the new system was put in place, the
requested (first) placement was marked 'DESIRED', so would never be used
if eviction became necessary. While a bug in the original commit
prevented this flag from working, when this was fixed in
4a0e7b3c ("drm/i915: fix applying placement flag"), it caused long hangs
on DG2 systems with small BAR.
Don't mark the requested placement DESIRED (or FALLBACK), allowing it to
be used in both situations. This matches the old behaviour, and resolves
the hangs.
Thanks to Justin Brewer for bisecting the issue.
Fixes: a78a8da51b ("drm/ttm: replace busy placement with flags v6")
Fixes: 4a0e7b3c37 ("drm/i915: fix applying placement flag")
Link: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11255
Signed-off-by: David Gow <david@davidgow.net>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240804091851.122186-2-david@davidgow.net
(cherry picked from commit 54bf0af908)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In some build configurations (e.g. x86 allmodconfig), 2 cpu_mask
variables exceeds the max stack frame size:
drivers/cpufreq/armada-8k-cpufreq.c:203:1: error: the frame size of 2128 bytes is larger than 2048 bytes
Fix it by making "cpus" static which is fine given that module init is
only called once.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The omap driver doesn't actually need asm/smp_plat.h, so drop it.
asm/cpu.h is not needed either as linux/cpu.h is already included.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The qcom-cpufreq-hw driver is relying on an implicit include of io.h
which doesn't get included on some architectures.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use of_property_count_u32_elems() and of_property_for_each_u32() instead
of of_find_property() and open coding the property parsing.
This is part of a larger effort to remove callers of of_find_property()
and similar functions. of_find_property() leaks the DT struct property
and data pointers which is a problem for dynamically allocated nodes
which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
[Viresh: Fixed build failure and initialize / increment 'i']
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Use of_property_present() to test for property presence rather than
of_(find|get)_property(). This is part of a larger effort to remove
callers of of_find_property() and similar functions. of_find_property()
leaks the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
kerneldoc was missing from earlier commit where
we exported xe_hw_engine_lookup. Add it.
Cc: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: "Thomas Hellström" <thomas.hellstrom@linux.intel.com>
Cc: intel-xe@lists.freedesktop.org
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806153009.1081382-2-mika.kuoppala@linux.intel.com
Export hw engine's mmio accessors. This is in preparation
to use these from eudebug code.
v2: s/hw_engine_mmio/xe_hw_engine_mmio (Matthew)
v3: kernel doc (Matthew)
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Dominik Grzegorzek <dominik.grzegorzek@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240806153009.1081382-1-mika.kuoppala@linux.intel.com
It may get wrong bitrate when connecting to AP set VHT 20MHz,
and thus we fix it to follow Wi-Fi spec.
Signed-off-by: Dian-Syuan Yang <dian_syuan0116@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240731070506.46100-6-pkshih@realtek.com
Add hardware encryption support for unicast management frames for
8922AE and 8852CE. Other chips will continue to use software
encryption for unicast management frames.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240731070506.46100-5-pkshih@realtek.com
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEUEC6huC2BN0pvD5fKDiiPnotvG8FAmax0xsTHG1rbEBwZW5n
dXRyb25peC5kZQAKCRAoOKI+ei28b+zSB/47ry4oIKT32byHfVBH3We7ZUU9AwA3
EiOfrVlfzomqNvrCUsMpmVrjI3nSExX0eJuuhaNzYyH0lnzNEekIO1ZVL+CdDDLQ
/OWiRpOarilz8vZp6VXAz+zGhh7i20dsTiKZxjS2bziMJMkk63KaoSXVC4YAcJVr
/UUsbtuMiVzJx8UYGa2X9x+5TRz+Efi5PIfY5xPcq4WkmakmSaqsVCi6LuBe0NE4
XPViHP6gNrQQa18q5yM7OVdHPC7n+uf8+AaFdOB9Yiv6QhAyD+ztwqupNlfsy9SC
gB4eyJpI/hYYpReh95lQSNqRM2toqt+iqO6R7I0AKVM9xDEidEMjAUlG
=Ek0x
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-6.12-20240806' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2024-08-06
The first patch is by Frank Li and adds the can-transceiver property
to the flexcan device-tree bindings.
Haibo Chen contributes 2 patches for the flexcan driver to add wakeup
support for the imx95.
The 2 patches by Stefan Mätje for the esd_402_pci driver clean up the
driver and add support for the one-shot mode.
The last 15 patches are by Jimmy Assarsson and add hardware timestamp
support for all devices covered by the kvaser_usb driver.
* tag 'linux-can-next-for-6.12-20240806' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next:
can: kvaser_usb: Rename kvaser_usb_{ethtool,netdev}_ops_hwts to kvaser_usb_{ethtool,netdev}_ops
can: kvaser_usb: Remove struct variables kvaser_usb_{ethtool,netdev}_ops
can: kvaser_usb: Remove KVASER_USB_QUIRK_HAS_HARDWARE_TIMESTAMP
can: kvaser_usb: leaf: Add hardware timestamp support to usbcan devices
can: kvaser_usb: leaf: Store MSB of timestamp
can: kvaser_usb: leaf: Add structs for Tx ACK and clock overflow commands
can: kvaser_usb: leaf: Add hardware timestamp support to leaf based devices
can: kvaser_usb: leaf: kvaser_usb_leaf_tx_acknowledge: Rename local variable
can: kvaser_usb: leaf: Replace kvaser_usb_leaf_m32c_dev_cfg with kvaser_usb_leaf_m32c_dev_cfg_{16,24,32}mhz
can: kvaser_usb: leaf: Assign correct timestamp_freq for kvaser_usb_leaf_imx_dev_cfg_{16,24,32}mhz
can: kvaser_usb: leaf: Add struct for Tx ACK commands
can: kvaser_usb: hydra: Set hardware timestamp on transmitted packets
can: kvaser_usb: hydra: Add struct for Tx ACK commands
can: kvaser_usb: hydra: kvaser_usb_hydra_ktime_from_rx_cmd: Drop {rx_} in function name
can: kvaser_usb: Add helper functions to convert device timestamp into ktime
can: esd_402_pci: Add support for one-shot mode
can: esd_402_pci: Rename esdACC CTRL register macros
can: flexcan: add wakeup support for imx95
dt-bindings: can: fsl,flexcan: move fsl,imx95-flexcan standalone
dt-bindings: can: fsl,flexcan: add common 'can-transceiver' for fsl,flexcan
====================
Link: https://patch.msgid.link/20240806074731.1905378-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Update scan offload H2C format to fit firmware version 35.21.
The new fields indicate lengths of variable length members, so
when driver and firmware are using mismatch version, FW could
handle the parsing better.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240731070506.46100-3-pkshih@realtek.com
For firmware version 0.35.31 and above, update H2C RFK
pre-notify to new implementation. Rename existing H2C
to v0 for backward compatibility.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240731070506.46100-2-pkshih@realtek.com
Compiling libcxgb_ppm.c results in several sparse warnings:
libcxgb_ppm.c:368:15: warning: incorrect type in assignment (different address spaces)
libcxgb_ppm.c:368:15: expected struct cxgbi_ppm_pool *pools
libcxgb_ppm.c:368:15: got void [noderef] __percpu *_res
libcxgb_ppm.c:374:48: warning: incorrect type in initializer (different address spaces)
libcxgb_ppm.c:374:48: expected void const [noderef] __percpu *__vpp_verify
libcxgb_ppm.c:374:48: got struct cxgbi_ppm_pool *
libcxgb_ppm.c:484:19: warning: incorrect type in assignment (different address spaces)
libcxgb_ppm.c:484:19: expected struct cxgbi_ppm_pool [noderef] __percpu *pool
libcxgb_ppm.c:484:19: got struct cxgbi_ppm_pool *[assigned] pool
libcxgb_ppm.c:511:21: warning: incorrect type in argument 1 (different address spaces)
libcxgb_ppm.c:511:21: expected void [noderef] __percpu *__pdata
libcxgb_ppm.c:511:21: got struct cxgbi_ppm_pool *[assigned] pool
Add __percpu annotation to *pools and *pool percpu pointers and to
ppm_alloc_cpu_pool() function that returns percpu pointer to fix
these warnings.
Compile tested only, but there is no difference in the resulting object file.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240804154635.4249-1-ubizjak@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The wol variable in ksz_port_set_mac_address() is declared with random
data, but the code in ksz_get_wol call may not be executed so the
WAKE_MAGIC check may be invalid resulting in an error message when
setting a MAC address after starting the DSA driver.
Fixes: 3b454b6390 ("net: dsa: microchip: ksz9477: Add Wake on Magic Packet support")
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://patch.msgid.link/20240805235200.24982-1-Tristram.Ha@microchip.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the PHY of the mido bus is enabled with Wake-on-LAN (WOL),
we cannot suspend the PHY. Although the WOL status has been
checked in phy_suspend(), returning -EBUSY(-16) would cause
the Power Management (PM) to fail to suspend. Since
phy_suspend() is an exported symbol (EXPORT_SYMBOL),
timely error reporting is needed. Therefore, an additional
check is performed here. If the PHY of the mido bus is enabled
with WOL, we skip calling phy_suspend() to avoid PM failure.
From the following logs, it has been observed that the phydev->attached_dev
is NULL, phydev is "stmmac-0:01", it not attached, but it will affect suspend
and resume.The actually attached "stmmac-0:00" will not dpm_run_callback():
mdio_bus_phy_suspend().
init log:
[ 5.932502] YT8521 Gigabit Ethernet stmmac-0:00: attached PHY driver
(mii_bus:phy_addr=stmmac-0:00, irq=POLL)
[ 5.932512] YT8521 Gigabit Ethernet stmmac-0:01: attached PHY driver
(mii_bus:phy_addr=stmmac-0:01, irq=POLL)
[ 24.566289] YT8521 Gigabit Ethernet stmmac-0:00: yt8521_read_status,
link down, media: UTP
suspend log:
[ 322.631362] OOM killer disabled.
[ 322.631364] Freezing remaining freezable tasks
[ 322.632536] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 322.632540] printk: Suspending console(s) (use no_console_suspend to debug)
[ 322.633052] YT8521 Gigabit Ethernet stmmac-0:01:
PM: dpm_run_callback(): mdio_bus_phy_suspend+0x0/0x110 [libphy] returns -16
[ 322.633071] YT8521 Gigabit Ethernet stmmac-0:01:
PM: failed to suspend: error -16
[ 322.669699] PM: Some devices failed to suspend, or early wake event detected
[ 322.669949] OOM killer enabled.
[ 322.669951] Restarting tasks ... done.
[ 322.671008] random: crng reseeded on system resumption
[ 322.671014] PM: suspend exit
Add a function that phylib can inquire of the driver whether WoL
has been enabled at the PHY.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Youwan Wang <youwan@nfschina.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Link: https://patch.msgid.link/20240731091537.771391-1-youwan@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Sets the `sysroot` field in rust-project.json which is now needed in
newer versions of rust-analyzer instead of the `sysroot_src` field.
Till [1] `rust-analyzer` used to guess the `sysroot` based on the
`sysroot_src` at [2]. Now `sysroot` is a required parameter for a
`rust-project.json` file. It is required because `rust-analyzer`
need it to find the proc-macro server [3].
In the current version of `rust-analyzer` the `sysroot_src` is only used
to include the inbuilt library crates (std, core, alloc, etc) [4]. Since
we already specify the core library to be included in the
`rust-project.json` we don't need to define the `sysroot_src`.
Code editors like VS Code try to use the latest version of rust-analyzer
(which is updated every week) instead of the version of rust-analyzer
that comes with the rustup toolchain (which is updated every six weeks
along with the rust version).
Without this change `rust-analyzer` is breaking for anyone using VS Code.
As they are getting the latest version of `rust-analyzer` with the
changes made in [1].
`rust-analyzer` will also start breaking for other developers as they
update their rust version (assuming that also updates the rust-analyzer
version on their system).
This patch should work with every setup as there is no more guess work
being done by `rust-analyzer`.
[ Lukas, who leads the rust-analyzer team, says:
`sysroot_src` is required now if you want to have the sysroot
source libraries be loaded. I think we used to infer it as
`{sysroot}/lib/rustlib/src/rust/library` before when only the
`sysroot` field was given but that was since changed to make it
possible in having a sysroot without the standard library sources
(that is only have the binaries available). So if you want the
library sources to be loaded by rust-analyzer you will have to set
that field as well now.
- Miguel ]
Link: https://github.com/rust-lang/rust-analyzer/pull/17287 [1]
Link: f372a8a117/crates/project-model/src/workspace.rs (L367-L374) [2]
Link: eeb192b79a/crates/project-model/src/sysroot.rs (L180-L192) [3]
Link: https://github.com/search?q=repo%3AVeykril%2Frust-analyzer%20src_root()&type=code [4]
Tested-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Sarthak Singh <sarthak.singh99@gmail.com>
Link: https://rust-for-linux.zulipchat.com/#narrow/stream/291565-Help/topic/How.20to.20rust-analyzer.20correctly.20working
Link: https://lore.kernel.org/r/20240724172713.899399-1-sarthak.singh99@gmail.com
[ Formatted comment, fixed typo and removed spurious empty line. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The count increases only when a node is successfully added to
the linked list.
Cc: stable@vger.kernel.org
Fixes: fa1aa143ac ("selinux: extended permissions for ioctls")
Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Stephen Smalley <stephen.smalley.work@gmail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
The VF API version for this release is 1.13.4.
Bumping the minimum required GuC version just before force-probe
removal allows us to set a baseline for what API features are expected
to be available. I.e., at this point there is no need for any version
checking in the code before using a feature. Of course, if/when the
API is extended in future GuC releases, those new features will need
API version checks in the code.
Bump the recommended GuC versions to match.
Also add numerical comparison helpers to simplify the version number
checks.
v2: Reword commit message and make comparison helpers GuC specific -
review feedback from Daniele, done by JohnH
Signed-off-by: Julia Filipchuk <julia.filipchuk@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802222129.3976212-3-John.C.Harrison@Intel.com
To pick up changes from:
f05c1ffc27 ALSA: pcm: reinvent the stream synchronization ID API
This should be used to beautify sound syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/sound/asound.h include/uapi/sound/asound.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: linux-sound@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
To pick up changes from:
608f6976c3 perf/x86/intel: Support new data source for Lunar Lake
This should be used to beautify perf syscall arguments and it addresses
these tools/perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Please see tools/include/uapi/README for details (it's in the first patch
of this series).
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: "Liang, Kan" <kan.liang@linux.intel.com>
Cc: linux-perf-users@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
There's no need to get the length of an DT array property before
parsing the array. of_property_read_variable_u32_array() takes a minimum
and maximum length and returns the actual length (or error code).
This is part of a larger effort to remove callers of of_find_property()
and similar functions. of_find_property() leaks the DT struct property
and data pointers which is a problem for dynamically allocated nodes
which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731201407.1838385-3-robh@kernel.org
Signed-off-by: Nishanth Menon <nm@ti.com>
of_property_read_u32() returns -EINVAL if a property is not present, so
the preceding check for presence with of_get_property() can be
dropped.
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT struct property
and data pointers which is a problem for dynamically allocated nodes
which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731201407.1838385-2-robh@kernel.org
Signed-off-by: Nishanth Menon <nm@ti.com>
There are 2 mux-controller nodes in J7200 which are responsible for
transferring can signals to the can phy but same node names for both
the mux-controllers led to errors while setting up both mux-controllers
for can phys simultaneously.
Thus, update node names for these mux-controller.
Fixes: da23e8d112 ("arm64: dts: ti: k3-j7200-som-p0: Add support for CAN instance 0 in main domain")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Reviewed-by: Judith Mendez <jm@ti.com>
Link: https://lore.kernel.org/r/20240729063411.1570930-3-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
There are 2 mux-controller nodes in J721S2 which are responsible for
transferring can signals to the can phy but same node names for both
the mux-controllers led to errors while setting up both mux-controllers
for can phys simultaneously.
Thus, update node names for these mux-controller.
Fixes: 98f3b667e1 ("arm64: dts: ti: k3-j721s2: Add support for CAN instances 3 and 5 in main domain")
Signed-off-by: Bhavya Kapoor <b-kapoor@ti.com>
Link: https://lore.kernel.org/r/20240729063411.1570930-2-b-kapoor@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
'struct k3_ring_ops' is not modified in this driver.
Constifying this structure moves some data to a read-only section, so
increase overall security.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
17090 3304 32 20426 4fca drivers/soc/ti/k3-ringacc.o
After:
=====
text data bss dec hex filename
17266 3144 32 20442 4fda drivers/soc/ti/k3-ringacc.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/cb9dfc18cdf890afa2c53cd74b0b330d6f1c30ab.1720546863.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Nishanth Menon <nm@ti.com>
When we want to debug the workqueue stall, we can immediately make
a panic to get the information we want.
In some systems, it may be necessary to quickly reboot the system to
escape from a workqueue lockup situation. In this case, we can control
the number of stall detections to generate panic.
workqueue.panic_on_stall sets the number times of the stall to trigger
panic. 0 disables the panic on stall.
Signed-off-by: Sangmoon Kim <sangmoon.kim@samsung.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Now, __constructor_order is boolean; 1 for forward-order systems,
0 for backward-order systems while parsing __LIST_APPEND().
Change it into a bool variable, and rename it for clarification.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
__constructor_order_last() is unneeded.
If __constructor_order_last() is not called on backward-order systems,
__constructor_order will remain 0 instead of being set to
_CONSTRUCTOR_ORDER_BACKWARD (= -1).
__LIST_APPEND() will still take the 'else' branch, so there is no
difference in the behavior.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
task_can_run_on_remote_rq() is similar to is_cpu_allowed() but there are
subtle differences. It currently open codes all the tests. This is
cumbersome to understand and error-prone in case the intersecting tests need
to be updated.
Factor out the common part - testing whether the task is allowed on the CPU
at all regardless of the CPU state - into task_allowed_on_cpu() and make
both is_cpu_allowed() and SCX's task_can_run_on_remote_rq() use it. As the
code is now linked between the two and each contains only the extra tests
that differ between them, it's less error-prone when the conditions need to
be updated. Also, improve the comment to explain why they are different.
v2: Replace accidental "extern inline" with "static inline" (Peter).
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
scx_task_iter_next_locked() skips tasks whose sched_class is
idle_sched_class. While it has a short comment explaining why it's testing
the sched_class directly isntead of using is_idle_task(), the comment
doesn't sufficiently explain what's going on and why. Improve the comment.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
On SMP, SCX performs dispatch from sched_class->balance(). As balance() was
not available in UP, it instead called the internal balance function from
put_prev_task_scx() and pick_next_task_scx() to emulate the effect, which is
rather nasty.
Enabling sched_class->balance() on UP shouldn't cause any meaningful
overhead. Enable balance() on UP and drop the ugly workaround.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
update_curr_scx() is open coding runtime updates. Use update_curr_common()
instead and avoid unnecessary deviations.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
SCX needs its balance() invoked even when waking up from a lower priority
sched class (idle) and put_prev_task_balance() thus has the logic to promote
@start_class if it's lower than ext_sched_class. This is only needed when
SCX is enabled. Add scx_enabled() test to avoid unnecessary overhead when
SCX is disabled.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Acked-by: David Vernet <void@manifault.com>
