Virtio spec says:
The driver MUST have negotiated the VIRTIO_NET_F_VQ_NOTF_COAL
feature when issuing commands VIRTIO_NET_CTRL_NOTF_COAL_VQ_SET
and VIRTIO_NET_CTRL_NOTF_COAL_VQ_GET.
So we add the feature negotiation check to
virtnet_send_{r,t}x_ctrl_coal_vq_cmd as a basis for the next bugfix patch.
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Heng Qi <hengqi@linux.alibaba.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
For IP which do not contain PDDR, currently use the pinmux API
pinctrl_gpio_direction_input() to config the output/input, pinmux
currently do not support get_direction(). So here add the GPIO
get_direction() support only for the IP which has Port Data
Direction Register (PDDR).
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Link: https://lore.kernel.org/r/20240801093028.732338-3-haibo.chen@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
This gpio controller support up to 32 pins per port. And all the
register width is 32 bit. So here use u32 to replace the original
unsigned long.
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://lore.kernel.org/r/20240801093028.732338-2-haibo.chen@nxp.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
On the PCH side the second PPS was introduced in ICP+.Add condition
On MTL_PCH and greater platform also having the second PPS.
Note that DG1/2 south block only has the single PPS, so need
to exclude the fake DG1/2 PCHs
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/11488
Fixes: 93cbc1accb ("drm/i915/mtl: Add fake PCH for Meteor Lake")
Cc: <stable@vger.kernel.org> # v6.9+
Signed-off-by: Dnyaneshwar Bhadane <dnyaneshwar.bhadane@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801111141.574854-1-dnyaneshwar.bhadane@intel.com
(cherry picked from commit da1878b61c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
In transmit path, it is likely that the iova is not aligned to PCIe TLP
max payload size, which is 128 for WCN7850. Normally in such cases hardware
is expected to split the packet into several parts in a manner such that
they, other than the first one, have aligned iova. However due to hardware
limitations, WCN7850 does not behave like that properly with some specific
unaligned iova in transmit path. This easily results in target hang in a
KPI transmit test: packet send/receive failure, WMI command send timeout
etc. Also fatal error seen in PCIe level:
...
Capabilities: ...
...
DevSta: ... FatalErr+ ...
...
...
Work around this by manually moving/reallocating payload buffer such that
we can map it to a 128 bytes aligned iova. The moving requires sufficient
head room or tail room in skb: for the former we can do ourselves a favor
by asking some extra bytes when registering with mac80211, while for the
latter we can do nothing.
Moving/reallocating buffer consumes additional CPU cycles, but the good news
is that an aligned iova increases PCIe efficiency. In my tests on some X86
platforms the KPI results are almost consistent.
Since this is seen only with WCN7850, add a new hardware parameter to
differentiate from others.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Cc: <stable@vger.kernel.org>
Tested-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://patch.msgid.link/20240715023814.20242-1-quic_bqiang@quicinc.com
The 1394 OHCI driver maintains bus time to respond to querying request.
The concurrent access to the bus time is protected by spinlock.
This commit uses guard macro to maintain the spinlock.
Link: https://lore.kernel.org/r/20240805085408.251763-16-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core functions uses spinlock in instance of fw_card structure to
protect concurrent access to properties in the instance.
This commit uses guard macro to maintain the spinlock.
Link: https://lore.kernel.org/r/20240805085408.251763-15-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function maintains pending asynchronous transactions by list in
the instance of fw_card. The concurrent access to the list is protected
by spinlock in the instance.
This commit uses guard macro to maintain the spinlock.
Link: https://lore.kernel.org/r/20240805085408.251763-14-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function maintains clients to receive phy configuration packets
by list in the instance of fw_card. The concurrent access to the list is
protected by spinlock in the instance.
This commit uses guard macro to maintain the list.
Link: https://lore.kernel.org/r/20240805085408.251763-13-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function allows one isochronous contexts per userspace client.
The concurrent access to the context is protected by spinlock in the
instance of client.
This commit uses guard macro to maintain the spinlock.
Link: https://lore.kernel.org/r/20240805085408.251763-12-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function provides UAPI to maintain isochronous resources allocated
by userspace clients across bus resets automatically. The resources are
maintained by IDR and the concurrent access to it is protected by spinlock
in the instance of client.
This commit uses guard macro to maintain the spinlock.
Link: https://lore.kernel.org/r/20240805085408.251763-11-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function maintains events to userspace by list in the instance of
client. The concurrent access to the list is protected by spinlock in
the instance.
This commit uses guard macro to maintain the spinlock.
Link: https://lore.kernel.org/r/20240805085408.251763-10-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function provides an operation for userspace application to
retrieve current value of CYCLE_TIMER register with several types of
system time. In the operation, local interrupt is disables so that the
access of the register and ktime are done atomically.
This commit uses guard macro to disable/enable local interrupts.
Link: https://lore.kernel.org/r/20240805085408.251763-9-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function maintains address handlers by list. It is protected by
spinlock to insert and remove entry to the list.
This commit uses guard macro to maintain the spinlock.
Link: https://lore.kernel.org/r/20240805085408.251763-8-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function maintains the instance of fw_device structure by IDR.
The concurrent access to IDR is protected by static read/write semaphore.
The semaphore is also utilized to protect concurrent access to the
content of configuration ROM cached to the instance so that the cache is
swapped to the latest one.
This commit uses guard macro to maintain the mutex.
Link: https://lore.kernel.org/r/20240805085408.251763-7-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function maintains address handlers by list. RCU is utilized
for efficient read access to any entries in the list.
This commit uses guard macro to maintain RCU locking and releasing.
Link: https://lore.kernel.org/r/20240805085408.251763-6-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The 1394 OHCI driver protects concurrent accesses to phy registers by
mutex object in fw_ohci structure.
This commit uses guard macro to maintain the mutex.
Link: https://lore.kernel.org/r/20240805085408.251763-5-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function maintains userspace clients by the list in fw_device
object associated to the operated character device. The concurrent
access to the list is protected by mutex in the object.
This commit uses guard macro to maintain the mutex.
Link: https://lore.kernel.org/r/20240805085408.251763-4-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function maintains registered cards by list. The concurrent
access to the list is protected by static mutex.
This commit uses guard macro to maintain the mutex.
Link: https://lore.kernel.org/r/20240805085408.251763-3-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
The core function provide a kernel API to send phy configuration packet.
Current implementation of the feature uses packet object allocated
statically. The concurrent access to the object is protected by static
mutex.
This commit uses guard macro to maintain the mutex.
Link: https://lore.kernel.org/r/20240805085408.251763-2-o-takashi@sakamocchi.jp
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
UAPI Changes:
- Rename xe perf layer as xe observation layer, but was
also made available via fixes to previous verison (Ashutosh)
- Use write-back caching mode for system memory on DGFX,
but was also mad available via fixes to previous version (Thomas)
- Expose SIMD16 EU mask in topology query for userspace to know
the type of EU, as available in PVC, Lunar Lake and Battlemage
(Lucas)
- Return ENOBUFS instead of ENOMEM in vm_bind if failure is tied
to an array of binds (Matthew Brost)
Driver Changes:
- Log cleanup moving messages to debug priority (Michal Wajdeczko)
- Add timeout to fences to adhere to dma_buf rules (Matthew Brost)
- Rename old engine nomenclature to exec_queue (Matthew Brost)
- Convert multiple bind ops to 1 job (Matthew Brost)
- Add error injection for vm bind to help testing error path
(Matthew Brost)
- Fix error handling in page table to propagate correctly
to userspace (Matthew Brost)
- Re-organize and cleanup SR-IOV related registers (Michal Wajdeczko)
- Make the device write barrier compatible with VF (Michal Wajdeczko)
- New display workarounds for Battlemage (Matthew Auld)
- New media workarounds for Lunar Lake and Battlemage (Ngai-Mint Kwan)
- New graphics workarounds for Lunar Lake (Bommu Krishnaiah)
- Tracepoint updates (Matthew Brost, Nirmoy Das)
- Cleanup the header generation for OOB workarounds (Lucas De Marchi)
- Fix leaking HDCP-related object (Nirmoy Das)
- Serialize L2 flushes to avoid races (Tejas Upadhyay)
- Log pid and comm on job timeout (José Roberto de Souza)
- Simplify boilerplate code for live kunit (Michal Wajdeczko)
- Improve kunit skips for live kunit (Michal Wajdeczko)
- Fix xe_sync cleanup when handling xe_exec ioctl (Ashutosh Dixit)
- Limit fair VF LMEM provisioning (Michal Wajdeczko)
- New workaround to fence mmio writes in Lunar Lake (Tejas Upadhyay)
- Warn on writes inaccessible register in VF (Michal Wajdeczko)
- Fix register lookup in VF (Michal Wajdeczko)
- Add GSC support for Battlemage (Alexander Usyskin)
- Fix wedging only the GT in which timeout occurred (Matthew Brost)
- Block device suspend when wedging (Matthew Brost)
- Handle compression and migration changes for Battlemage
(Akshata Jahagirdar)
- Limit access of stolen memory for Lunar Lake (Uma Shankar)
- Fail invalid addresses during user fence creation (Matthew Brost)
- Refcount xe_file to safely and accurately store fdinfo stats
(Umesh Nerlige Ramappa)
- Cleanup and fix PM reference for TLB invalidation code
(Matthew Brost)
- Fix PM reference handling when communicating with GuC (Matthew Brost)
- Add new BO flag for 2 MiB alignement and use in VF (Michal Wajdeczko)
- Simplify MMIO setup for multi-tile platforms (Lucas De Marchi)
- Add check for uninitialized access to OOB workarounds
(Lucas De Marchi)
- New GSC and HuC firmware blobs for Lunar Lake and Battlemage
(Daniele Ceraolo Spurio)
- Unify mmio wait logic (Gustavo Sousa)
- Fix off-by-one when processing RTP rules (Lucas De Marchi)
- Future-proof migrate logic with compressed PAT flag (Matt Roper)
- Add WA kunit tests for Battlemage (Lucas De Marchi)
- Test active tracking for workaorunds with kunit (Lucas De Marchi)
- Add kunit tests for RTP with no actions (Lucas De Marchi)
- Unify parse of OR rules in RTP (Lucas De Marchi)
- Add performance tuning for Battlemage (Sai Teja Pottumuttu)
- Make bit masks unsigned (Geert Uytterhoeven)
-----BEGIN PGP SIGNATURE-----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=xmxR
-----END PGP SIGNATURE-----
Merge tag 'drm-xe-next-2024-07-30' of https://gitlab.freedesktop.org/drm/xe/kernel into drm-next
drm-xe-next for 6.12
UAPI Changes:
- Rename xe perf layer as xe observation layer, but was
also made available via fixes to previous verison (Ashutosh)
- Use write-back caching mode for system memory on DGFX,
but was also mad available via fixes to previous version (Thomas)
- Expose SIMD16 EU mask in topology query for userspace to know
the type of EU, as available in PVC, Lunar Lake and Battlemage
(Lucas)
- Return ENOBUFS instead of ENOMEM in vm_bind if failure is tied
to an array of binds (Matthew Brost)
Driver Changes:
- Log cleanup moving messages to debug priority (Michal Wajdeczko)
- Add timeout to fences to adhere to dma_buf rules (Matthew Brost)
- Rename old engine nomenclature to exec_queue (Matthew Brost)
- Convert multiple bind ops to 1 job (Matthew Brost)
- Add error injection for vm bind to help testing error path
(Matthew Brost)
- Fix error handling in page table to propagate correctly
to userspace (Matthew Brost)
- Re-organize and cleanup SR-IOV related registers (Michal Wajdeczko)
- Make the device write barrier compatible with VF (Michal Wajdeczko)
- New display workarounds for Battlemage (Matthew Auld)
- New media workarounds for Lunar Lake and Battlemage (Ngai-Mint Kwan)
- New graphics workarounds for Lunar Lake (Bommu Krishnaiah)
- Tracepoint updates (Matthew Brost, Nirmoy Das)
- Cleanup the header generation for OOB workarounds (Lucas De Marchi)
- Fix leaking HDCP-related object (Nirmoy Das)
- Serialize L2 flushes to avoid races (Tejas Upadhyay)
- Log pid and comm on job timeout (José Roberto de Souza)
- Simplify boilerplate code for live kunit (Michal Wajdeczko)
- Improve kunit skips for live kunit (Michal Wajdeczko)
- Fix xe_sync cleanup when handling xe_exec ioctl (Ashutosh Dixit)
- Limit fair VF LMEM provisioning (Michal Wajdeczko)
- New workaround to fence mmio writes in Lunar Lake (Tejas Upadhyay)
- Warn on writes inaccessible register in VF (Michal Wajdeczko)
- Fix register lookup in VF (Michal Wajdeczko)
- Add GSC support for Battlemage (Alexander Usyskin)
- Fix wedging only the GT in which timeout occurred (Matthew Brost)
- Block device suspend when wedging (Matthew Brost)
- Handle compression and migration changes for Battlemage
(Akshata Jahagirdar)
- Limit access of stolen memory for Lunar Lake (Uma Shankar)
- Fail invalid addresses during user fence creation (Matthew Brost)
- Refcount xe_file to safely and accurately store fdinfo stats
(Umesh Nerlige Ramappa)
- Cleanup and fix PM reference for TLB invalidation code
(Matthew Brost)
- Fix PM reference handling when communicating with GuC (Matthew Brost)
- Add new BO flag for 2 MiB alignement and use in VF (Michal Wajdeczko)
- Simplify MMIO setup for multi-tile platforms (Lucas De Marchi)
- Add check for uninitialized access to OOB workarounds
(Lucas De Marchi)
- New GSC and HuC firmware blobs for Lunar Lake and Battlemage
(Daniele Ceraolo Spurio)
- Unify mmio wait logic (Gustavo Sousa)
- Fix off-by-one when processing RTP rules (Lucas De Marchi)
- Future-proof migrate logic with compressed PAT flag (Matt Roper)
- Add WA kunit tests for Battlemage (Lucas De Marchi)
- Test active tracking for workaorunds with kunit (Lucas De Marchi)
- Add kunit tests for RTP with no actions (Lucas De Marchi)
- Unify parse of OR rules in RTP (Lucas De Marchi)
- Add performance tuning for Battlemage (Sai Teja Pottumuttu)
- Make bit masks unsigned (Geert Uytterhoeven)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/k7xuktfav4zmtxxjr77glu2hszypvzgmzghoumh757nqfnk7kn@ccfi4ts3ytbk
Linux kernel expects thermal zone node names to be maximum of 19
characters (see THERMAL_NAME_LENGTH, including terminating NUL byte) and
bindings/dtbs_check points that:
fsl-ls2088a-rdb.dtb: thermal-zones: 'core-cluster1-thermal', 'core-cluster2-thermal', 'core-cluster3-thermal', 'core-cluster4-thermal'
do not match any of the regexes: '^[a-zA-Z][a-zA-Z0-9\\-]{1,10}-thermal$', 'pinctrl-[0-9]+'
Name longer than 19 characters leads to driver probe errors when
registering such thermal zone.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The previous pinconf settings(made by the bootloader) need to be
overwritten when configuring the pinctrl of a driver during the boot
process.
Configuring the bias of a GPIO at runtime (e.g. pull-up) needs to
preserve the other settings unaltered.
This patch introduces changes to differentiate between the two cases.
Signed-off-by: Radu Pirea <radu-nicolae.pirea@nxp.com>
Signed-off-by: Florin Buica <florin.buica@nxp.com>
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
Link: https://lore.kernel.org/20240723131832.1171036-4-andrei.stefanescu@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Previously, it was possible to only configure the open-drain for a pin.
However, after a pin got configured with open-drain, there wasn't any
way to disable it. Add the push-pull configuration in order to reverse
the open-drain configuration.
Signed-off-by: Florin Buica <florin.buica@nxp.com>
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
Link: https://lore.kernel.org/20240723131832.1171036-3-andrei.stefanescu@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The IBE (input buffer enable) should be enabled for a GPIO. Reading the
value will return the one from the input register, writing the value
will return the one from the output register.
This offers the flexibility to check if the value intended to be set
matches the actual physical one.
Signed-off-by: Florin Buica <florin.buica@nxp.com>
Signed-off-by: Andrei Stefanescu <andrei.stefanescu@oss.nxp.com>
Link: https://lore.kernel.org/20240723131832.1171036-2-andrei.stefanescu@oss.nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
There is no need to describe the compatible string inside
a dtso file.
dt-schema produces super verbose warnings about that.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Parthiban Nallathambi <parthiban@linumiz.com>
Acked-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
There is no need to describe the compatible string inside
a dtso file.
dt-schema produces super verbose warnings about that.
Signed-off-by: Fabio Estevam <festevam@denx.de>
Acked-by: Parthiban Nallathambi <parthiban@linumiz.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add thermal_zone label because it may be overwrite by board level dts file.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add flexspi support.
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add sai1, sai2. Add i2c4 and wm8962 and other dependent nodes.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add sai[1..6], NXP Audio Transceiver (XCVR) Controller and MICFIL Digital
Audio Interface (MICFIL).
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add eDMA1, eDMA2 and eDMA3 support for iMX95.
Add dmas and dma-names for each peripheral, which use eDMA.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When the CS35L41 loads its firmware, it has a number of controls to
affect its behaviour. Currently, these controls are exposed as ALSA
Controls.
These controls were never intended to be exposed to users but the
firmware doesn't mark them hidden, so make the driver ignore them.
Any changes in the coefficients handled by these controls needs to
be matched to the individual system by SSID, which is already handled
using the tuning file, when firmware is loaded, so UCM should not be
setting these controls anyway.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Link: https://patch.msgid.link/20240801155047.456540-1-sbinding@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A number of laptops have gone to market with old firmware versions that
export controls that have since been hidden, but we can't just install a
newer firmware because the firmware for each product is customized and
qualified by the OEM. The issue is that alsactl save and restore has no
idea what controls are good to persist which can lead to
misconfiguration.
There is no reason that the UCM or user should need to interact with any
of the ALSA controls for the firmware coefficients so they can be
removed entirely, this also simplifies the driver.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://patch.msgid.link/20240801143139.34549-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This makes it possible to test the new CEC_MSG_FL_REPLY_VENDOR_ID flag.
The vivid driver will Feature Abort any messages that do not have
exactly 1 payload byte. It ignores messages where the payload byte is
even, and where it is odd it will reply with the payload byte incremented
by 1. Basically a simple ping-pong command.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
If this flag is set, then the reply is expected to consist of
the CEC_MSG_VENDOR_COMMAND_WITH_ID opcode followed by the Vendor ID (as
used in bytes 1-4 of the message), followed by the struct cec_msg reply
field.
Note that this assumes that the byte after the Vendor ID is a
vendor-specific opcode.
This flag makes it easier to wait for replies to vendor commands,
using the same CEC framework support for waiting for regular replies.
Support for this flag is indicated by setting the new
CEC_CAP_REPLY_VENDOR_ID capability.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This patch adds support for GPIO pins GPI35 and GPI36 on the Nuvoton
NPCM8xx BMC SoC.
The pins are configured for only for input.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/20240716194008.3502068-5-tmaimon77@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Clear polarity before setting both edges to ensure that the polarity is
in the same state before configuring events for both edges
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/20240716194008.3502068-4-tmaimon77@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Remove non-existent smb4den abd lpcclk pins, groups and functions on
the Nuvoton NPCM8XX BMC SoC.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Link: https://lore.kernel.org/20240716194008.3502068-3-tmaimon77@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The current map seems to be out of sync (and includes a duplicate entry
for GPIO193..).
Replace it with the map present in shipping devices' ACPI tables.
This new one seems more complete, as it e.g. contains GPIO145 (PCIE6a
WAKE#)
Fixes: 05e4941d97 ("pinctrl: qcom: Add X1E80100 pinctrl driver")
Signed-off-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Rajendra Nayak <quic_rjendra@quicinc.com>
Link: https://lore.kernel.org/20240711-topic-x1e_pdc_tlmm-v1-1-e278b249d793@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
