Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/G2UL and
RZ/Five SMARC SoMs, as per RGMII specification.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-7-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/G2LC SMARC
SoM, as per RGMII specification.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-6-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Configure ET0_TXC and ET1_TXC as outputs on the Renesas RZ/[GV]2L SMARC
SoMs, as per RGMII specification.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/20240625200316.4282-5-paul.barker.ct@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Luigi Leonardi says:
====================
vsock: avoid queuing on intermediate queue if possible
This series introduces an optimization for vsock/virtio to reduce latency
and increase the throughput: When the guest sends a packet to the host,
and the intermediate queue (send_pkt_queue) is empty, if there is enough
space, the packet is put directly in the virtqueue.
v3->v4
While running experiments on fio with 64B payload, I realized that there
was a mistake in my fio configuration, so I re-ran all the experiments
and now the latency numbers are indeed lower with the patch applied.
I also noticed that I was kicking the host without the lock.
- Fixed a configuration mistake on fio and re-ran all experiments.
- Fio latency measurement using 64B payload.
- virtio_transport_send_skb_fast_path sends kick with the tx_lock acquired
- Addressed all minor style changes requested by maintainer.
- Rebased on latest net-next
- Link to v3: https://lore.kernel.org/r/20240711-pinna-v3-0-697d4164fe80@outlook.com
v2->v3
- Performed more experiments using iperf3 using multiple streams
- Handling of reply packets removed from virtio_transport_send_skb,
as is needed just by the worker.
- Removed atomic_inc/atomic_sub when queuing directly to the vq.
- Introduced virtio_transport_send_skb_fast_path that handles the
steps for sending on the vq.
- Fixed a missing mutex_unlock in error path.
- Changed authorship of the second commit
- Rebased on latest net-next
v1->v2
In this v2 I replaced a mutex_lock with a mutex_trylock because it was
insidea RCU critical section. I also added a check on tx_run, so if the
module is being removed the packet is not queued. I'd like to thank Stefano
for reporting the tx_run issue.
Applied all Stefano's suggestions:
- Minor code style changes
- Minor commit text rewrite
Performed more experiments:
- Check if all the packets go directly to the vq (Matias' suggestion)
- Used iperf3 to see if there is any improvement in overall throughput
from guest to host
- Pinned the vhost process to a pCPU.
- Run fio using 512B payload
Rebased on latest net-next
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce two tests, one for SOCK_STREAM and one for SOCK_SEQPACKET,
which use SIOCOUTQ ioctl to check that the number of unsent bytes is
zero after delivering a packet.
vsock_connect and vsock_accept are no longer static: this is to
create more generic tests, allowing code to be reused for SEQPACKET
and STREAM.
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Introduce support for virtio_transport_unsent_bytes
ioctl for virtio_transport, vhost_vsock and vsock_loopback.
For all transports the unsent bytes counter is incremented
in virtio_transport_get_credit.
In virtio_transport (G2H) and in vhost-vsock (H2G) the counter
is decremented when the skbuff is consumed. In vsock_loopback the
same skbuff is passed from the transmitter to the receiver, so
the counter is decremented before queuing the skbuff to the
receiver.
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for ioctl(s) in AF_VSOCK.
The only ioctl available is SIOCOUTQ/TIOCOUTQ, which returns the number
of unsent bytes in the socket. This information is transport-specific
and is delegated to them using a callback.
Suggested-by: Daan De Meyer <daan.j.demeyer@gmail.com>
Signed-off-by: Luigi Leonardi <luigi.leonardi@outlook.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The test here creates an sg table, but never maps it, when
we get to drm_gem_shmem_free, the helper tries to unmap and this
causes warnings on some platforms and debug kernels.
This also sets a 64-bit dma mask, as I see an swiotlb warning if I
stick with the default 32-bit one.
Fixes: 93032ae634 ("drm/test: add a test suite for GEM objects backed by shmem")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Marco Pagani <marpagan@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240715083551.777807-1-airlied@gmail.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
In drm_client_modeset_probe(), the return value of drm_mode_duplicate() is
assigned to modeset->mode, which will lead to a possible NULL pointer
dereference on failure of drm_mode_duplicate(). Add a check to avoid npd.
Cc: stable@vger.kernel.org
Fixes: cf13909aee ("drm/fb-helper: Move out modeset config code")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240802044736.1570345-1-make24@iscas.ac.cn
Add a specific entry for the x86 architecture cpuid database.
Reference the x86-cpuid.org development mailing list to facilitate easy
tracking by external stakeholders such as the Xen developers.
Include myself as a reviewer.
Note, this MAINTAINERS entry will also cover the auto-generated C cpuid
bitfields header files to be submitted in a future series.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-10-darwi@linutronix.de
For parsing the cpuid bitfields, kcpuid uses an incomplete CSV file with
300+ bitfields.
Use an auto-generated CSV file from the x86-cpuid.org project instead.
It provides complete bitfields coverage: 830+ bitfields, all with proper
descriptions.
The auto-generated file has the following blurb automatically added:
# SPDX-License-Identifier: CC0-1.0
# Generator: x86-cpuid-db v1.0
The generator tag includes the project's workspace "git describe"
version string. It is intended for projects like KernelCI, to aid in
verifying that the auto-generated files have not been tampered with.
The file also has the blurb:
# Auto-generated file.
# Please submit all updates and bugfixes to https://x86-cpuid.org
It's thus kindly requested that the Linux kernel's x86 tree maintainers
enforce sending all updates to x86-cpuid.org's upstream database first,
thus benefiting the whole ecosystem.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://gitlab.com/x86-cpuid.org/x86-cpuid-db/-/blob/v1.0/LICENSE.rst
Link: https://gitlab.com/x86-cpuid.org/x86-cpuid-db
Link: https://lore.kernel.org/all/20240718134755.378115-9-darwi@linutronix.de
It's a common pattern in cpuid leaves to have the same bitfields format
repeated across a number of subleaves. Typically, this is used for
enumerating hierarchial structures like cache and TLB levels, CPU
topology levels, etc.
Modify kcpuid.c to handle subleaf ranges in the CSV file subleaves
column. For example, make it able to parse lines in the form:
# LEAF, SUBLEAVES, reg, bits, short_name , ...
0xb, 1:0, eax, 4:0, x2apic_id_shift , ...
0xb, 1:0, ebx, 15:0, domain_lcpus_count , ...
0xb, 1:0, ecx, 7:0, domain_nr , ...
This way, full output can be printed to the user.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-8-darwi@linutronix.de
cpuid.csv will be extended in further commits with all-publicly-known
CPUID leaves and bitfields. Thus, modify has_subleafs() to identify all
known leaves with subleaves.
Remove the redundant "is_amd" check since all x86 vendors already report
the maxium supported extended leaf at leaf 0x80000000 EAX register.
The extra mentioned leaves are:
- Leaf 0x12, Intel Software Guard Extensions (SGX) enumeration
- Leaf 0x14, Intel process trace (PT) enumeration
- Leaf 0x17, Intel SoC vendor attributes enumeration
- Leaf 0x1b, Intel PCONFIG (Platform configuration) enumeration
- Leaf 0x1d, Intel AMX (Advanced Matrix Extensions) tile information
- Leaf 0x1f, Intel v2 extended topology enumeration
- Leaf 0x23, Intel ArchPerfmonExt (Architectural PMU ext) enumeration
- Leaf 0x80000020, AMD Platform QoS extended features enumeration
- Leaf 0x80000026, AMD v2 extended topology enumeration
Set the 'max_subleaf' variable for all the newly marked leaves with extra
subleaves. Ideally, this should be fetched from the CSV file instead,
but the current kcpuid code architecture has two runs: one run to
serially invoke the cpuid instructions and save all the output in-memory,
and one run to parse this in-memory output through the CSV specification.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-7-darwi@linutronix.de
While parsing and saving bitfield names from the CSV file, an extra
leading space is copied verbatim. That extra space is not a big issue
now, but further commits will add a new CSV file with much more padding
for the bitfield's name column.
Strip leading/trailing whitespaces while saving bitfield names.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-6-darwi@linutronix.de
Protect against the kcpuid code parsing faulty max subleaf numbers
through a min() expression. Thus, ensuring that max_subleaf will always
be ≤ MAX_SUBLEAF_NUM.
Use "u32" for the subleaf numbers since kcpuid is compiled with -Wextra,
which includes signed/unsigned comparisons warnings.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-5-darwi@linutronix.de
cpuid.csv will be extended in further commits with all-publicly-known
CPUID leaves and bitfields. One of the new leaves is 0xd for extended
CPU state enumeration. Depending on XCR0 dword bits, it can export up to
64 subleaves.
Set kcpuid.c MAX_SUBLEAF_NUM to 64.
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-4-darwi@linutronix.de
When kcpuid is invoked with "--all --details", the detailed description
column is not properly aligned for all bitfield rows:
CPUID_0x4_ECX[0x0]:
cache_level : 0x1 - Cache Level ...
cache_self_init - Cache Self Initialization
This is due to differences in output handling between boolean single-bit
"bitflags" and multi-bit bitfields. For the former, the bitfield's value
is not outputted as it is implied to be true by just outputting the
bitflag's name in its respective line.
If long descriptions were requested through the --all parameter, properly
align the bitflag's description columns through extra tabs. With that,
the sample output above becomes:
CPUID_0x4_ECX[0x0]:
cache_level : 0x1 - Cache Level ...
cache_self_init - Cache Self Initialization
Signed-off-by: Ahmed S. Darwish <darwi@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/20240718134755.378115-3-darwi@linutronix.de
Use of_property_read_bool() to read boolean properties rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240731191312.1710417-21-robh@kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
This reverts commit d45bb9c5f7.
Just got a report that this causes some suspend/resume issues,
so back it out and I'll investigate it later.
Reported-by: Mike Galbraith <efault@gmx.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
safety, several fixes for vmwgfx for various modesetting issues, PM fixes
for ast, async flips improvements and two fixes for nouveau to fix
resource refcounting and buffer placement.
-----BEGIN PGP SIGNATURE-----
iJUEABMJAB0WIQTkHFbLp4ejekA/qfgnX84Zoj2+dgUCZqtOrwAKCRAnX84Zoj2+
dmBbAYCrGTJBkyRbRCjAOXuNAG0HvIPrsCzqZdDHFwHNU/EDQOlVgESSdD/wUuKA
zB8QY5cBf1jWB9t1eMuesBgEdt0HMKlpF10GHawn9VD6z40dSuckjck5FfpT1MbC
OprSyrufWA==
=AGSk
-----END PGP SIGNATURE-----
Merge tag 'drm-misc-fixes-2024-08-01' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
A couple drm_panic fixes, several v3d fixes to increase the new timestamp API
safety, several fixes for vmwgfx for various modesetting issues, PM fixes
for ast, async flips improvements and two fixes for nouveau to fix
resource refcounting and buffer placement.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240801-interesting-antique-bat-2fe4c0@houat
Commit 804e498e04 ("sd: convert to the atomic queue limits API")
introduced pairs of function calls to queue_limits_start_update() and
queue_limits_commit_update(). These two functions lock and unlock
q->limits_lock. In sd_revalidate_disk(), sd_read_cpr() is called after
queue_limits_start_update() call and before queue_limits_commit_update()
call. sd_read_cpr() locks q->sysfs_dir_lock and &q->sysfs_lock. Then new
lock dependencies were created between q->limits_lock, q->sysfs_dir_lock
and q->sysfs_lock, as follows:
sd_revalidate_disk
queue_limits_start_update
mutex_lock(&q->limits_lock)
sd_read_cpr
disk_set_independent_access_ranges
mutex_lock(&q->sysfs_dir_lock)
mutex_lock(&q->sysfs_lock)
mutex_unlock(&q->sysfs_lock)
mutex_unlock(&q->sysfs_dir_lock)
queue_limits_commit_update
mutex_unlock(&q->limits_lock)
However, the three locks already had reversed dependencies in other
places. Then the new dependencies triggered the lockdep WARN "possible
circular locking dependency detected" [1]. This WARN was observed by
running the blktests test case srp/002.
To avoid the WARN, move the sd_read_cpr() call in sd_revalidate_disk()
after the queue_limits_commit_update() call. In other words, move the
sd_read_cpr() call out of the q->limits_lock region.
[1] https://lore.kernel.org/linux-scsi/vlmv53ni3ltwxplig5qnw4xsl2h6ccxijfbqzekx76vxoim5a5@dekv7q3es3tx/
Fixes: 804e498e04 ("sd: convert to the atomic queue limits API")
Signed-off-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20240801054234.540532-1-shinichiro.kawasaki@wdc.com
Tested-by: Luca Coelho <luciano.coelho@intel.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The ufshcd_add_delay_before_dme_cmd() always introduces a delay of
MIN_DELAY_BEFORE_DME_CMDS_US between DME commands even when it's not
required. The delay is added when the UFS host controller supplies the
quirk UFSHCD_QUIRK_DELAY_BEFORE_DME_CMDS.
Fix the logic to update hba->last_dme_cmd_tstamp to ensure subsequent DME
commands have the correct delay in the range of 0 to
MIN_DELAY_BEFORE_DME_CMDS_US.
Update the timestamp at the end of the function to ensure it captures the
latest time after any necessary delay has been applied.
Signed-off-by: Vamshi Gajjela <vamshigajjela@google.com>
Link: https://lore.kernel.org/r/20240724135126.1786126-1-vamshigajjela@google.com
Fixes: cad2e03d86 ("ufs: add support to allow non standard behaviours (quirks)")
Cc: stable@vger.kernel.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Originally, rtw89_btc_phymap() and rtw89_btc_path_phymap() access chan
with hard-code RTW89_CHANCTX_0. But, they are problematic when the chip
supports multiple channels.
So, change their prototype and pass chanctx_idx ahead. Let callers still
pass RTW89_CHANCTX_0 for now, but we will refine callers in the following.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240727080650.12195-8-pkshih@realtek.com
Originally, these H2C commands access chan with hard-code RTW89_CHANCTX_0.
They are problematic when the chip supports multiple channels. So, correct
them by accessing right chan under rtwvif.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240727080650.12195-7-pkshih@realtek.com
For chips supporting multiple channels, they need to get target info
from rtwvif, e.g. PHY index and Chanctx index.
So, change rfk_scan prototype and pass rtwvif ahead.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240727080650.12195-6-pkshih@realtek.com
For chips supporting multiple channels, they need to get target info
from rtwvif, e.g. PHY index and Chanctx index.
So, change rfk_channel prototype and pass rtwvif ahead.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240727080650.12195-5-pkshih@realtek.com
Originally, we planed to fill MAC_0/1 indicators with chanctx and
use sub_entity_xxx for these things. However, there are some reasons
listed below which make us give up this plan after we know our Wi-Fi 7
HW design.
1. one link is bound to one HW band during its life time
but, one link might change chanctx dynamically
2. in concurrent mode, assume 1st vif is MLD
1st vif's 2nd link might use the same chanctx as 2nd vif
but, they are not on the same HW band
So, we let sub_entity_xxx stuffs deal with only chanctx now. And, to be
more readable, we rename sub_entity related words to chanctx.
No logic is changed.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240727080650.12195-4-pkshih@realtek.com
In general, MCC (multi-channel concurrency) stops when some chanctx is
unassigned. Originally, we let FW to stop at a fixed role. However, it
might be the one to be unassigned.
So, iterate MCC roles and select one which is still holding chanctx.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240727080650.12195-3-pkshih@realtek.com
Originally during unassign-chanctx, MCC (multi-channel concurrency) is
re-planed before set-channel if need. But, we might calculate MCC stuffs
based on old channel info. And, the following set-channel might be racing
with FW MCC state mechanism. So, we refine this flow. Now, if MCC re-plan
is needed here, it will be done after set-channel.
Besides, to be more rigorous, we now ensure entity isn't paused before we
deal with MCC things here.
Signed-off-by: Zong-Zhe Yang <kevin_yang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240727080650.12195-2-pkshih@realtek.com
Matthieu Baerts says:
====================
mptcp: fix endpoints with 'signal' and 'subflow' flags
When looking at improving the user experience around the MPTCP endpoints
setup, I noticed that setting an endpoint with both the 'signal' and the
'subflow' flags -- as it has been done in the past by users according to
bug reports we got -- was resulting on only announcing the endpoint, but
not using it to create subflows: the 'subflow' flag was then ignored.
My initial thought was to modify IPRoute2 to warn the user when the two
flags were set, but it doesn't sound normal to ignore one of them. I
then looked at modifying the kernel not to allow having the two flags
set, but when discussing about that with Mat, we thought it was maybe
not ideal to do that, as there might be use-cases, we might break some
configs. Then I saw it was working before v5.17. So instead, I fixed the
support on the kernel side (patch 5) using Paolo's suggestion. This also
includes a fix on the options side (patch 1: for v5.11+), an explicit
deny of some options combinations (patch 2: for v5.18+), and some
refactoring (patches 3 and 4) to ease the inclusion of the patch 5.
While at it, I added a new selftest (patch 7) to validate this case --
including a modification of the chk_add_nr helper to inverse the sides
were the counters are checked (patch 6) -- and allowed ADD_ADDR echo
just after the MP_JOIN 3WHS.
The selftests modification have the same Fixes tag as the previous
commit, but no 'Cc: Stable': if the backport can work, that's good --
but it still need to be verified by running the selftests -- if not, no
need to worry, many CIs will use the selftests from the last stable
version to validate previous stable releases.
====================
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-0-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It should be quite uncommon to set both the subflow and the signal
flags: the initiator of the connection is typically the one creating new
subflows, not the other peer, then no need to announce additional local
addresses, and use it to create subflows.
But some people might be confused about the flags, and set both "just to
be sure at least the right one is set". To verify the previous fix, and
avoid future regressions, this specific case is now validated: the
client announces a new address, and initiates a new subflow from the
same address.
While working on this, another bug has been noticed, where the client
reset the new subflow because an ADD_ADDR echo got received as the 3rd
ACK: this new test also explicitly checks that no RST have been sent by
the client and server.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-7-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the following commit, the client will initiate the ADD_ADDR, instead
of the server. We need to way to verify the ADD_ADDR have been correctly
sent.
Note: the default expected counters for when the port number is given
are never changed by the caller, no need to accept them as parameter
then.
The 'Fixes' tag here below is the same as the one from the previous
commit: this patch here is not fixing anything wrong in the selftests,
but it validates the previous fix for an issue introduced by this commit
ID.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-6-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Up to the 'Fixes' commit, having an endpoint with both the 'signal' and
'subflow' flags, resulted in the creation of a subflow and an address
announcement using the address linked to this endpoint. After this
commit, only the address announcement was done, ignoring the 'subflow'
flag.
That's because the same bitmap is used for the two flags. It is OK to
keep this single bitmap, the already selected local endpoint simply have
to be re-used, but not via select_local_address() not to look at the
just modified bitmap.
Note that it is unusual to set the two flags together: creating a new
subflow using a new local address will implicitly advertise it to the
other peer. So in theory, no need to advertise it explicitly as well.
Maybe there are use-cases -- the subflow might not reach the other peer
that way, we can ask the other peer to try initiating the new subflow
without delay -- or very likely the user is confused, and put both flags
"just to be sure at least the right one is set". Still, if it is
allowed, the kernel should do what has been asked: using this endpoint
to announce the address and to create a new subflow from it.
An alternative is to forbid the use of the two flags together, but
that's probably too late, there are maybe use-cases, and it was working
before. This patch will avoid people complaining subflows are not
created using the endpoint they added with the 'subflow' and 'signal'
flag.
Note that with the current patch, the subflow might not be created in
some corner cases, e.g. if the 'subflows' limit was reached when sending
the ADD_ADDR, but changed later on. It is probably not worth splitting
id_avail_bitmap per target ('signal', 'subflow'), which will add another
large field to the msk "just" to track (again) endpoints. Anyway,
currently when the limits are changed, the kernel doesn't check if new
subflows can be created or removed, because we would need to keep track
of the received ADD_ADDR, and more. It sounds OK to assume that the
limits should be properly configured before establishing new
connections.
Fixes: 86e39e0448 ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-5-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
It sounds better to avoid wasting cycles and / or put extreme memory
pressure on the system by trying to create new subflows if it was not
possible to add a new item in the announce list.
While at it, a warning is now printed if the entry was already in the
list as it should not happen with the in-kernel path-manager. With this
PM, mptcp_pm_alloc_anno_list() should only fail in case of memory
pressure.
Fixes: b6c0838086 ("mptcp: remove addr and subflow in PM netlink")
Cc: stable@vger.kernel.org
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-4-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As mentioned in the 'Fixes' commit, the port flag is only supported by
the 'signal' flag, and not by the 'subflow' one. Then if both the
'signal' and 'subflow' flags are set, the problem is the same: the
feature cannot work with the 'subflow' flag.
Technically, if both the 'signal' and 'subflow' flags are set, it will
be possible to create the listening socket, but not to establish a
subflow using this source port. So better to explicitly deny it, not to
create some confusions because the expected behaviour is not possible.
Fixes: 09f12c3ab7 ("mptcp: allow to use port and non-signal in set_flags")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-2-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before this patch, receiving an ADD_ADDR echo on the just connected
MP_JOIN subflow -- initiator side, after the MP_JOIN 3WHS -- was
resulting in an MP_RESET. That's because only ACKs with a DSS or
ADD_ADDRs without the echo bit were allowed.
Not allowing the ADD_ADDR echo after an MP_CAPABLE 3WHS makes sense, as
we are not supposed to send an ADD_ADDR before because it requires to be
in full established mode first. For the MP_JOIN 3WHS, that's different:
the ADD_ADDR can be sent on a previous subflow, and the ADD_ADDR echo
can be received on the recently created one. The other peer will already
be in fully established, so it is allowed to send that.
We can then relax the conditions here to accept the ADD_ADDR echo for
MPJ subflows.
Fixes: 67b12f792d ("mptcp: full fully established support after ADD_ADDR")
Cc: stable@vger.kernel.org
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20240731-upstream-net-20240731-mptcp-endp-subflow-signal-v1-1-c8a9b036493b@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For different firmware type, it could change IDMEM mode, so reset it to
default to avoid encountering error for RTL8851B/RTL8852B/RTL8852BT
if that kind of firmware was downloaded before.
rtw89_8851be 0000:02:00.0: Firmware version 0.29.41.3, cmd version 0, type 5
rtw89_8851be 0000:02:00.0: Firmware version 0.29.41.3, cmd version 0, type 3
rtw89_8851be 0000:02:00.0: MAC has already powered on
rtw89_8851be 0000:02:00.0: fw security fail
rtw89_8851be 0000:02:00.0: download firmware fail
rtw89_8851be 0000:02:00.0: [ERR]fwdl 0x1E0 = 0x62
rtw89_8851be 0000:02:00.0: [ERR]fwdl 0x83F2 = 0x8
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f51c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f524
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f51c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f500
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f51c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f53c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f520
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f520
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f508
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f534
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f520
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f534
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f508
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f53c
rtw89_8851be 0000:02:00.0: [ERR]fw PC = 0xb892f524
rtw89_8851be 0000:02:00.0: failed to setup chip information
rtw89_8851be: probe of 0000:02:00.0 failed with error -16
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240724052626.12774-4-pkshih@realtek.com
Add support for ieee80211::rfkill_poll ops. This enables periodic
monitoring of the hardware rfkill state, triggering updates when the
status changes.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240724052626.12774-3-pkshih@realtek.com
To more accurately debug performance issues, EVM statistics will
differentiate between different space streams, and only beacon
and data frames will be included.
Signed-off-by: Kuan-Chung Chen <damon.chen@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240724052626.12774-2-pkshih@realtek.com
Use of_property_read_bool() to read boolean properties rather than
of_find_property(). This is part of a larger effort to remove callers
of of_find_property() and similar functions. of_find_property() leaks
the DT struct property and data pointers which is a problem for
dynamically allocated nodes which may be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://patch.msgid.link/20240731191601.1714639-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Replace of_get_property() with the type specific
of_property_count_u32_elems() to get the property length.
This is part of a larger effort to remove callers of of_get_property()
and similar functions. of_get_property() leaks the DT property data
pointer which is a problem for dynamically allocated nodes which may
be freed.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240731201514.1839974-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The check for "leds" and "gpio-controller" both being present is never
true because "leds" is a node, not a property. This could be fixed
with a check for child node, but there's really no need for the kernel
to validate a DT. Just continue ignoring the LEDs if GPIOs are present.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20240731201703.1842022-2-robh@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For CCK packets we could get incorrect reports from hardware.
And this causes wrong frequencies being reported. Parse the channel
information from IE if provided by AP to fix this.
Signed-off-by: Po-Hao Huang <phhuang@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://patch.msgid.link/20240724050501.7550-1-pkshih@realtek.com
When executing ioctl to allocate tags, if the peer address is 0,
mctp_alloc_local_tag now replaces it with 0xff. However, during tag
dropping, this replacement is not performed, potentially causing the key
not to be dropped as expected.
Signed-off-by: John Wang <wangzhiqiang02@ieisystem.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20240730084636.184140-1-wangzhiqiang02@ieisystem.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
