No point in doing this all over the place.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Avoid the late sighand lock/unlock dance when a timer is not armed to
enforce reevaluation of the timer base so that the process wide CPU timer
sampling can be disabled.
Do it right at the point where the arming decision is made which already
has sighand locked.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
A leftover from historical code which describes fiction.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
posix_cpu_timer_set() uses @val as variable for the current time. That's
confusing at best.
Use @now as anywhere else and rewrite the confusing comment about clock
sampling.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
There is no point in arming SIGEV_NONE timers as they never deliver a
signal. timer_gettime() is handling the expiry time correctly and that's
all SIGEV_NONE timers care about.
Prevent arming them and remove the expiry handler code which just disarms
them.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reuse the split out __posix_cpu_timer_get() function which does already the
right thing.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Expired SIGEV_NONE oneshot timers must return 0 nsec for the expiry time in
timer_get(), but the posix CPU timer implementation returns 1 nsec.
Add the missing conditional.
This will be cleaned up in a follow up patch.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Expired SIGEV_NONE oneshot timers must return 0 nsec for the expiry time in
timer_get(), but the posix CPU timer implementation returns 1 nsec.
Add the missing conditional.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
timer_gettime() must return the remaining time to the next expiry of a
timer or 0 if the timer is not armed and no signal pending, but posix CPU
timers fail to forward a timer which is already expired.
Add the required logic to address that.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
There is no point to return the interval for timers which have been
disarmed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
In preparation for addressing issues in the timer_get() and timer_set()
functions of posix CPU timers.
No functional change.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
When a timer signal is blocked and later unblocked then one signal should
be delivered with the correct number of overruns since the timer was queued.
Validate that behaviour.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
timer_gettime() must return the correct expiry time for interval timers
even when the timer is not armed, which is the case when a signal is
pending but blocked.
Works correctly for regular posix timers, but not for posix CPU timers.
Add a selftest to validate the fixes.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Posix timers with a delivery mode of SIGEV_NONE deliver no signals but the
remaining expiry time must be readable via timer_gettime() for both one
shot and interval timers.
That's implemented correctly for regular posix timers but broken for posix
CPU timers.
Add a self test so the fixes can be verified.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Add a test case to validate correct behaviour vs. timer reprogramming and
deletion.
The handling of queued signals in case of timer reprogramming or deletion
is inconsistent at best.
POSIX does not really specify the behaviour for that:
- "The effect of disarming or resetting a timer with pending expiration
notifications is unspecified."
- "The disposition of pending signals for the deleted timer is
unspecified."
In both cases it is reasonable to expect that pending signals are
discarded. Especially in the reprogramming case it does not make sense to
account for previous overruns or to deliver a signal for a timer which
has been disarmed.
Add tests to validate that no unexpected signals are delivered. They fail
for now until the signal and posix timer code is updated.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Add a test case to validate correct behaviour vs. SIG_IGN.
The posix specification states:
"Setting a signal action to SIG_IGN for a signal that is pending shall
cause the pending signal to be discarded, whether or not it is blocked."
The kernel implements this in the signal handling code, but due to the way
how posix timers are handling SIG_IGN for periodic timers, the behaviour
after installing a real handler again is inconsistent and suprising.
The following sequence is expected to deliver a signal:
install_handler(SIG);
block_signal(SIG);
timer_create(...); <- Should send SIG
timer_settime(value=100ms, interval=100ms);
sleep(1); <- Timer expires and queues signal, timer is not rearmed
as that should happen in the signal delivery path
ignore_signal(SIG); <- Discards queued signal
install_handler(SIG); <- Restore handler, should rearm but does not
sleep(1);
unblock_signal(SIG); <- Should deliver one signal with overrun count
set in siginfo
This fails because nothing rearms the timer when the signal handler is
restored. Add a test for this case which fails until the signal and posix
timer code is fixed.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
No point in returning to main() on fatal errors. Just exit right away.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Reviewed-by: Anna-Maria Behnsen <anna-maria@linutronix.de>
The bpf_tcp_ca struct_ops currently uses a "u32 unsupported_ops[]"
array to track which ops is not supported.
After cfi_stubs had been added, the function pointer in cfi_stubs is
also NULL for the unsupported ops. Thus, the "u32 unsupported_ops[]"
becomes redundant. This observation was originally brought up in the
bpf/cfi discussion:
https://lore.kernel.org/bpf/CAADnVQJoEkdjyCEJRPASjBw1QGsKYrF33QdMGc1RZa9b88bAEA@mail.gmail.com/
The recent bpf qdisc patch (https://lore.kernel.org/bpf/20240714175130.4051012-6-amery.hung@bytedance.com/)
also needs to specify quite many unsupported ops. It is a good time
to clean it up.
This patch removes the need of "u32 unsupported_ops[]" and tests for null-ness
in the cfi_stubs instead.
Testing the cfi_stubs is done in a new function bpf_struct_ops_supported().
The verifier will call bpf_struct_ops_supported() when loading the
struct_ops program. The ".check_member" is removed from the bpf_tcp_ca
in this patch. ".check_member" could still be useful for other subsytems
to enforce other restrictions (e.g. sched_ext checks for prog->sleepable).
To keep the same error return, ENOTSUPP is used.
Cc: Amery Hung <ameryhung@gmail.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240722183049.2254692-2-martin.lau@linux.dev
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This commit adds sample output for net attach/detach on
tcx subcommand.
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240721144252.96264-1-chen.dylane@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This commit adds bash-completion for attaching tcx program on interface.
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240721144238.96246-1-chen.dylane@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Now, attach/detach tcx prog supported in libbpf, so we can add new
command 'bpftool attach/detach tcx' to attach tcx prog with bpftool
for user.
# bpftool prog load tc_prog.bpf.o /sys/fs/bpf/tc_prog
# bpftool prog show
...
192: sched_cls name tc_prog tag 187aeb611ad00cfc gpl
loaded_at 2024-07-11T15:58:16+0800 uid 0
xlated 152B jited 97B memlock 4096B map_ids 100,99,97
btf_id 260
# bpftool net attach tcx_ingress name tc_prog dev lo
# bpftool net
...
tc:
lo(1) tcx/ingress tc_prog prog_id 29
# bpftool net detach tcx_ingress dev lo
# bpftool net
...
tc:
# bpftool net attach tcx_ingress name tc_prog dev lo
# bpftool net
tc:
lo(1) tcx/ingress tc_prog prog_id 29
Test environment: ubuntu_22_04, 6.7.0-060700-generic
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240721144221.96228-1-chen.dylane@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This commit no logical changed, just increases code readability and
facilitates TCX prog expansion, which will be implemented in the next
patch.
Signed-off-by: Tao Chen <chen.dylane@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20240721143353.95980-2-chen.dylane@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Leon Hwang says:
====================
bpf: Fix tailcall hierarchy
This patchset fixes a tailcall hierarchy issue.
The issue is confirmed in the discussions of
"bpf, x64: Fix tailcall infinite loop" [0].
The issue has been resolved on both x86_64 and arm64 [1].
I provide a long commit message in the "bpf, x64: Fix tailcall hierarchy"
patch to describe how the issue happens and how this patchset resolves the
issue in details.
How does this patchset resolve the issue?
In short, it stores tail_call_cnt on the stack of main prog, and propagates
tail_call_cnt_ptr to its subprogs.
First, at the prologue of main prog, it initializes tail_call_cnt and
prepares tail_call_cnt_ptr. And at the prologue of subprog, it reuses
the tail_call_cnt_ptr from caller.
Then, when a tailcall happens, it increments tail_call_cnt by its pointer.
v5 -> v6:
* Address comments from Eduard:
* Add JITed dumping along annotating comments
* Rewrite two selftests with RUN_TESTS macro.
v4 -> v5:
* Solution changes from tailcall run ctx to tail_call_cnt and its pointer.
It's because v4 solution is unable to handle the case that there is no
tailcall in subprog but there is tailcall in EXT prog which attaches to
the subprog.
v3 -> v4:
* Solution changes from per-task tail_call_cnt to tailcall run ctx.
As for per-cpu/per-task solution, there is a case it is unable to handle [2].
v2 -> v3:
* Solution changes from percpu tail_call_cnt to tail_call_cnt at task_struct.
v1 -> v2:
* Solution changes from extra run-time call insn to percpu tail_call_cnt.
* Address comments from Alexei:
* Use percpu tail_call_cnt.
* Use asm to make sure no callee saved registers are touched.
RFC v2 -> v1:
* Solution changes from propagating tail_call_cnt with its pointer to extra
run-time call insn.
* Address comments from Maciej:
* Replace all memcpy(prog, x86_nops[5], X86_PATCH_SIZE) with
emit_nops(&prog, X86_PATCH_SIZE)
RFC v1 -> RFC v2:
* Address comments from Stanislav:
* Separate moving emit_nops() as first patch.
Links:
[0] https://lore.kernel.org/bpf/6203dd01-789d-f02c-5293-def4c1b18aef@gmail.com/
[1] https://github.com/kernel-patches/bpf/pull/7350/checks
[2] https://lore.kernel.org/bpf/CAADnVQK1qF+uBjwom2s2W-yEmgd_3rGi5Nr+KiV3cW0T+UPPfA@mail.gmail.com/
====================
Link: https://lore.kernel.org/r/20240714123902.32305-1-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This patch fixes a tailcall issue caused by abusing the tailcall in
bpf2bpf feature on arm64 like the way of "bpf, x64: Fix tailcall
hierarchy".
On arm64, when a tail call happens, it uses tail_call_cnt_ptr to
increment tail_call_cnt, too.
At the prologue of main prog, it has to initialize tail_call_cnt and
prepare tail_call_cnt_ptr.
At the prologue of subprog, it pushes x26 register twice, and does not
initialize tail_call_cnt.
At the epilogue, it pops x26 twice, no matter whether it is main prog or
subprog.
Fixes: d4609a5d8c ("bpf, arm64: Keep tail call count across bpf2bpf calls")
Acked-by: Puranjay Mohan <puranjay@kernel.org>
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20240714123902.32305-3-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
This fixes 3 issues:
- prevent admin commands on one VF blocking another:
prevents a bad VF from blocking a good one, as well
as fixing a scalability issue with large # of VFs
- correctly return error on command failure on octeon:
currently if any commands fail we treat it as success
- fix modpost warning when building virtio_dma_buf:
harmless, but the fix is trivial
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFCBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmajTPEPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRposcH90Gjchks1cqznVEGiH/FRzclYeK2VZKZDR/A
EVfoe+vnSgCO1vAx0fla6Db2IR/FM81jBFolfwpCKhA4W/vbczeUTop2/kAM+JQD
uP+yjQ0xpEIqVBp+tpUVuekiGGxfJd1Ky3jCp6kYf7TPbQ50+BczCUd3YBnZ7YtY
WHNod1wpxTDj66bvHPBxb3dnAcHsVUHWmB8kpgFQMsd6CNVk9mvA9WIj9UgIfbj1
/PNyETZRyqEjwl8/A11LdTqcUeZKm5PJjB7FfWc/ZfJOqtRpP/9848ESVvlgPjMd
I4YSN5E5rLjv1R1ErTKfgiq5R82JJv6WhzqxdbhhlKb+TJaTDQ==
=wH2A
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio fixes from Michael Tsirkin:
"The biggest thing here is the adminq change - but it looks like the
only way to avoid headq blocking causing indefinite stalls.
This fixes three issues:
- Prevent admin commands on one VF blocking another.
This prevents a bad VF from blocking a good one, as well as fixing
a scalability issue with large # of VFs
- Correctly return error on command failure on octeon. We used to
treat failed commands as a success.
- Fix modpost warning when building virtio_dma_buf. Harmless, but the
fix is trivial"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio_pci_modern: remove admin queue serialization lock
virtio_pci_modern: use completion instead of busy loop to wait on admin cmd result
virtio_pci_modern: pass cmd as an identification token
virtio_pci_modern: create admin queue of queried size
virtio: create admin queues alongside other virtqueues
virtio_pci: pass vq info as an argument to vp_setup_vq()
virtio: push out code to vp_avq_index()
virtio_pci_modern: treat vp_dev->admin_vq.info.vq pointer as static
virtio_pci: introduce vector allocation fallback for slow path virtqueues
virtio_pci: pass vector policy enum to vp_find_one_vq_msix()
virtio_pci: pass vector policy enum to vp_find_vqs_msix()
virtio_pci: simplify vp_request_msix_vectors() call a bit
virtio_pci: push out single vq find code to vp_find_one_vq_msix()
vdpa/octeon_ep: Fix error code in octep_process_mbox()
virtio: add missing MODULE_DESCRIPTION() macro
This patch fixes a tailcall issue caused by abusing the tailcall in
bpf2bpf feature.
As we know, tail_call_cnt propagates by rax from caller to callee when
to call subprog in tailcall context. But, like the following example,
MAX_TAIL_CALL_CNT won't work because of missing tail_call_cnt
back-propagation from callee to caller.
\#include <linux/bpf.h>
\#include <bpf/bpf_helpers.h>
\#include "bpf_legacy.h"
struct {
__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
__uint(max_entries, 1);
__uint(key_size, sizeof(__u32));
__uint(value_size, sizeof(__u32));
} jmp_table SEC(".maps");
int count = 0;
static __noinline
int subprog_tail1(struct __sk_buff *skb)
{
bpf_tail_call_static(skb, &jmp_table, 0);
return 0;
}
static __noinline
int subprog_tail2(struct __sk_buff *skb)
{
bpf_tail_call_static(skb, &jmp_table, 0);
return 0;
}
SEC("tc")
int entry(struct __sk_buff *skb)
{
volatile int ret = 1;
count++;
subprog_tail1(skb);
subprog_tail2(skb);
return ret;
}
char __license[] SEC("license") = "GPL";
At run time, the tail_call_cnt in entry() will be propagated to
subprog_tail1() and subprog_tail2(). But, when the tail_call_cnt in
subprog_tail1() updates when bpf_tail_call_static(), the tail_call_cnt
in entry() won't be updated at the same time. As a result, in entry(),
when tail_call_cnt in entry() is less than MAX_TAIL_CALL_CNT and
subprog_tail1() returns because of MAX_TAIL_CALL_CNT limit,
bpf_tail_call_static() in suprog_tail2() is able to run because the
tail_call_cnt in subprog_tail2() propagated from entry() is less than
MAX_TAIL_CALL_CNT.
So, how many tailcalls are there for this case if no error happens?
From top-down view, does it look like hierarchy layer and layer?
With this view, there will be 2+4+8+...+2^33 = 2^34 - 2 = 17,179,869,182
tailcalls for this case.
How about there are N subprog_tail() in entry()? There will be almost
N^34 tailcalls.
Then, in this patch, it resolves this case on x86_64.
In stead of propagating tail_call_cnt from caller to callee, it
propagates its pointer, tail_call_cnt_ptr, tcc_ptr for short.
However, where does it store tail_call_cnt?
It stores tail_call_cnt on the stack of main prog. When tail call
happens in subprog, it increments tail_call_cnt by tcc_ptr.
Meanwhile, it stores tail_call_cnt_ptr on the stack of main prog, too.
And, before jump to tail callee, it has to pop tail_call_cnt and
tail_call_cnt_ptr.
Then, at the prologue of subprog, it must not make rax as
tail_call_cnt_ptr again. It has to reuse tail_call_cnt_ptr from caller.
As a result, at run time, it has to recognize rax is tail_call_cnt or
tail_call_cnt_ptr at prologue by:
1. rax is tail_call_cnt if rax is <= MAX_TAIL_CALL_CNT.
2. rax is tail_call_cnt_ptr if rax is > MAX_TAIL_CALL_CNT, because a
pointer won't be <= MAX_TAIL_CALL_CNT.
Here's an example to dump JITed.
struct {
__uint(type, BPF_MAP_TYPE_PROG_ARRAY);
__uint(max_entries, 1);
__uint(key_size, sizeof(__u32));
__uint(value_size, sizeof(__u32));
} jmp_table SEC(".maps");
int count = 0;
static __noinline
int subprog_tail(struct __sk_buff *skb)
{
bpf_tail_call_static(skb, &jmp_table, 0);
return 0;
}
SEC("tc")
int entry(struct __sk_buff *skb)
{
int ret = 1;
count++;
subprog_tail(skb);
subprog_tail(skb);
return ret;
}
When bpftool p d j id 42:
int entry(struct __sk_buff * skb):
bpf_prog_0c0f4c2413ef19b1_entry:
; int entry(struct __sk_buff *skb)
0: endbr64
4: nopl (%rax,%rax)
9: xorq %rax, %rax ;; rax = 0 (tail_call_cnt)
c: pushq %rbp
d: movq %rsp, %rbp
10: endbr64
14: cmpq $33, %rax ;; if rax > 33, rax = tcc_ptr
18: ja 0x20 ;; if rax > 33 goto 0x20 ---+
1a: pushq %rax ;; [rbp - 8] = rax = 0 |
1b: movq %rsp, %rax ;; rax = rbp - 8 |
1e: jmp 0x21 ;; ---------+ |
20: pushq %rax ;; <--------|---------------+
21: pushq %rax ;; <--------+ [rbp - 16] = rax
22: pushq %rbx ;; callee saved
23: movq %rdi, %rbx ;; rbx = skb (callee saved)
; count++;
26: movabsq $-82417199407104, %rdi
30: movl (%rdi), %esi
33: addl $1, %esi
36: movl %esi, (%rdi)
; subprog_tail(skb);
39: movq %rbx, %rdi ;; rdi = skb
3c: movq -16(%rbp), %rax ;; rax = tcc_ptr
43: callq 0x80 ;; call subprog_tail()
; subprog_tail(skb);
48: movq %rbx, %rdi ;; rdi = skb
4b: movq -16(%rbp), %rax ;; rax = tcc_ptr
52: callq 0x80 ;; call subprog_tail()
; return ret;
57: movl $1, %eax
5c: popq %rbx
5d: leave
5e: retq
int subprog_tail(struct __sk_buff * skb):
bpf_prog_3a140cef239a4b4f_subprog_tail:
; int subprog_tail(struct __sk_buff *skb)
0: endbr64
4: nopl (%rax,%rax)
9: nopl (%rax) ;; do not touch tail_call_cnt
c: pushq %rbp
d: movq %rsp, %rbp
10: endbr64
14: pushq %rax ;; [rbp - 8] = rax (tcc_ptr)
15: pushq %rax ;; [rbp - 16] = rax (tcc_ptr)
16: pushq %rbx ;; callee saved
17: pushq %r13 ;; callee saved
19: movq %rdi, %rbx ;; rbx = skb
; asm volatile("r1 = %[ctx]\n\t"
1c: movabsq $-105487587488768, %r13 ;; r13 = jmp_table
26: movq %rbx, %rdi ;; 1st arg, skb
29: movq %r13, %rsi ;; 2nd arg, jmp_table
2c: xorl %edx, %edx ;; 3rd arg, index = 0
2e: movq -16(%rbp), %rax ;; rax = [rbp - 16] (tcc_ptr)
35: cmpq $33, (%rax)
39: jae 0x4e ;; if *tcc_ptr >= 33 goto 0x4e --------+
3b: jmp 0x4e ;; jmp bypass, toggled by poking |
40: addq $1, (%rax) ;; (*tcc_ptr)++ |
44: popq %r13 ;; callee saved |
46: popq %rbx ;; callee saved |
47: popq %rax ;; undo rbp-16 push |
48: popq %rax ;; undo rbp-8 push |
49: nopl (%rax,%rax) ;; tail call target, toggled by poking |
; return 0; ;; |
4e: popq %r13 ;; restore callee saved <--------------+
50: popq %rbx ;; restore callee saved
51: leave
52: retq
Furthermore, when trampoline is the caller of bpf prog, which is
tail_call_reachable, it is required to propagate rax through trampoline.
Fixes: ebf7d1f508 ("bpf, x64: rework pro/epilogue and tailcall handling in JIT")
Fixes: e411901c0b ("bpf: allow for tailcalls in BPF subprograms for x64 JIT")
Reviewed-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Leon Hwang <hffilwlqm@gmail.com>
Link: https://lore.kernel.org/r/20240714123902.32305-2-hffilwlqm@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Eduard Zingerman says:
====================
bpf: track find_equal_scalars history on per-instruction level
This is a fix for precision tracking bug reported in [0].
It supersedes my previous attempt to fix similar issue in commit [1].
Here is a minimized test case from [0]:
0: call bpf_get_prandom_u32;
1: r7 = r0;
2: r8 = r0;
3: call bpf_get_prandom_u32;
4: if r0 > 1 goto +0;
/* --- checkpoint #1: r7.id=1, r8.id=1 --- */
5: if r8 >= r0 goto 9f;
6: r8 += r8;
/* --- checkpoint #2: r7.id=1, r8.id=0 --- */
7: if r7 == 0 goto 9f;
8: r0 /= 0;
/* --- checkpoint #3 --- */
9: r0 = 42;
10: exit;
W/o this fix verifier incorrectly assumes that instruction at label
(8) is unreachable. The issue is caused by failure to infer
precision mark for r0 at checkpoint #1:
- first verification path is:
- (0-4): r0 range [0,1];
- (5): r8 range [0,0], propagated to r7;
- (6): r8.id is reset;
- (7): jump is predicted to happen;
- (9-10): safe exit.
- when jump at (7) is predicted mark_chain_precision() for r7 is
called and backtrack_insn() proceeds as follows:
- at (7) r7 is marked as precise;
- at (5) r8 is not currently tracked and thus r0 is not marked;
- at (4-5) boundary logic from [1] is triggered and r7,r8 are marked
as precise;
- => r0 precision mark is missed.
- when second branch of (4) is considered, verifier prunes the state
because r0 is not marked as precise in the visited state.
Basically, backtracking logic fails to notice that at (5)
range information is gained for both r7 and r8, and thus both
r8 and r0 have to be marked as precise.
This happens because [1] can only account for such range
transfers at parent/child state boundaries.
The solution suggested by Andrii Nakryiko in [0] is to use jump
history to remember which registers gained range as a result of
find_equal_scalars() [renamed to sync_linked_regs()] and use
this information in backtrack_insn().
Which is what this patch-set does.
The patch-set uses u64 value as a vector of 10-bit values that
identify registers gaining range in find_equal_scalars().
This amounts to maximum of 6 possible values.
To check if such capacity is sufficient I've instrumented kernel
to track a histogram for maximal amount of registers that gain range
in find_equal_scalars per program verification [2].
Measurements done for verifier selftests and Cilium bpf object files
from [3] show that number of such registers is *always* <= 4 and
in 98% of cases it is <= 2.
When tested on a subset of selftests identified by
selftests/bpf/veristat.cfg and Cilium bpf object files from [3]
this patch-set has minimal verification performance impact:
File Program Insns (DIFF) States (DIFF)
------------------------ ------------------------ -------------- -------------
bpf_host.o tail_handle_nat_fwd_ipv4 -75 (-0.61%) -3 (-0.39%)
pyperf600_nounroll.bpf.o on_event +1673 (+0.33%) +3 (+0.01%)
[0] https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
[1] commit 904e6ddf41 ("bpf: Use scalar ids in mark_chain_precision()")
[2] https://github.com/eddyz87/bpf/tree/find-equal-scalars-in-jump-history-with-stats
[3] https://github.com/anakryiko/cilium
Changes:
- v2 -> v3:
A number of stylistic changes suggested by Andrii:
- renamings:
- struct reg_or_spill -> linked_reg;
- find_equal_scalars() -> collect_linked_regs;
- copy_known_reg() -> sync_linked_regs;
- collect_linked_regs() now returns linked regs set of
size 2 or larger;
- dropped usage of bit fields in struct linked_reg;
- added a patch changing references to find_equal_scalars() in
selftests comments.
- v1 -> v2:
- patch "bpf: replace env->cur_hist_ent with a getter function" is
dropped (Andrii);
- added structure linked_regs and helper functions to [de]serialize
u64 value as such structure (Andrii);
- bt_set_equal_scalars() renamed to bt_sync_linked_regs(), moved to
start and end of backtrack_insn() in order to untie linked
register logic from conditional jumps backtracking.
Andrii requested a more radical change of moving linked registers
processing to bt_set_xxx() functions, I did an experiment in this
direction:
https://github.com/eddyz87/bpf/tree/find-equal-scalars-in-jump-history--linked-regs-in-bt-set-reg
the end result of the experiment seems much uglier than version
presented in v2.
Revisions:
- v1: https://lore.kernel.org/bpf/20240222005005.31784-1-eddyz87@gmail.com/
- v2: https://lore.kernel.org/bpf/20240705205851.2635794-1-eddyz87@gmail.com/
====================
Link: https://lore.kernel.org/r/20240718202357.1746514-1-eddyz87@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
find_equal_scalars() is renamed to sync_linked_regs(),
this commit updates existing references in the selftests comments.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-5-eddyz87@gmail.com
Add a few test cases to verify precision tracking for scalars gaining
range because of sync_linked_regs():
- check what happens when more than 6 registers might gain range in
sync_linked_regs();
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and one of
linked registers is marked precise;
- check if precision is propagated correctly when operand of
conditional jump gained range in sync_linked_regs() and a
other-linked operand of the conditional jump is marked precise;
- add a minimized reproducer for precision tracking bug reported in [0];
- Check that mark_chain_precision() for one of the conditional jump
operands does not trigger equal scalars precision propagation.
[0] https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-4-eddyz87@gmail.com
Function mark_precise_scalar_ids() is superseded by
bt_sync_linked_regs() and equal scalars tracking in jump history.
mark_precise_scalar_ids() propagates precision over registers sharing
same ID on parent/child state boundaries, while jump history records
allow bt_sync_linked_regs() to propagate same information with
instruction level granularity, which is strictly more precise.
This commit removes mark_precise_scalar_ids() and updates test cases
in progs/verifier_scalar_ids to reflect new verifier behavior.
The tests are updated in the following manner:
- mark_precise_scalar_ids() propagated precision regardless of
presence of conditional jumps, while new jump history based logic
only kicks in when conditional jumps are present.
Hence test cases are augmented with conditional jumps to still
trigger precision propagation.
- As equal scalars tracking no longer relies on parent/child state
boundaries some test cases are no longer interesting,
such test cases are removed, namely:
- precision_same_state and precision_cross_state are superseded by
linked_regs_bpf_k;
- precision_same_state_broken_link and equal_scalars_broken_link
are superseded by linked_regs_broken_link.
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-3-eddyz87@gmail.com
Use bpf_verifier_state->jmp_history to track which registers were
updated by find_equal_scalars() (renamed to collect_linked_regs())
when conditional jump was verified. Use recorded information in
backtrack_insn() to propagate precision.
E.g. for the following program:
while verifying instructions
1: r1 = r0 |
2: if r1 < 8 goto ... | push r0,r1 as linked registers in jmp_history
3: if r0 > 16 goto ... | push r0,r1 as linked registers in jmp_history
4: r2 = r10 |
5: r2 += r0 v mark_chain_precision(r0)
while doing mark_chain_precision(r0)
5: r2 += r0 | mark r0 precise
4: r2 = r10 |
3: if r0 > 16 goto ... | mark r0,r1 as precise
2: if r1 < 8 goto ... | mark r0,r1 as precise
1: r1 = r0 v
Technically, do this as follows:
- Use 10 bits to identify each register that gains range because of
sync_linked_regs():
- 3 bits for frame number;
- 6 bits for register or stack slot number;
- 1 bit to indicate if register is spilled.
- Use u64 as a vector of 6 such records + 4 bits for vector length.
- Augment struct bpf_jmp_history_entry with a field 'linked_regs'
representing such vector.
- When doing check_cond_jmp_op() remember up to 6 registers that
gain range because of sync_linked_regs() in such a vector.
- Don't propagate range information and reset IDs for registers that
don't fit in 6-value vector.
- Push a pair {instruction index, linked registers vector}
to bpf_verifier_state->jmp_history.
- When doing backtrack_insn() check if any of recorded linked
registers is currently marked precise, if so mark all linked
registers as precise.
This also requires fixes for two test_verifier tests:
- precise: test 1
- precise: test 2
Both tests contain the following instruction sequence:
19: (bf) r2 = r9 ; R2=scalar(id=3) R9=scalar(id=3)
20: (a5) if r2 < 0x8 goto pc+1 ; R2=scalar(id=3,umin=8)
21: (95) exit
22: (07) r2 += 1 ; R2_w=scalar(id=3+1,...)
23: (bf) r1 = r10 ; R1_w=fp0 R10=fp0
24: (07) r1 += -8 ; R1_w=fp-8
25: (b7) r3 = 0 ; R3_w=0
26: (85) call bpf_probe_read_kernel#113
The call to bpf_probe_read_kernel() at (26) forces r2 to be precise.
Previously, this forced all registers with same id to become precise
immediately when mark_chain_precision() is called.
After this change, the precision is propagated to registers sharing
same id only when 'if' instruction is backtracked.
Hence verification log for both tests is changed:
regs=r2,r9 -> regs=r2 for instructions 25..20.
Fixes: 904e6ddf41 ("bpf: Use scalar ids in mark_chain_precision()")
Reported-by: Hao Sun <sunhao.th@gmail.com>
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240718202357.1746514-2-eddyz87@gmail.com
Closes: https://lore.kernel.org/bpf/CAEf4BzZ0xidVCqB47XnkXcNhkPWF6_nTV7yt+_Lf0kcFEut2Mg@mail.gmail.com/
Make use of -M compiler options when building .test.o objects to
generate .d files and avoid re-building all tests every time.
Previously, if a single test bpf program under selftests/bpf/progs/*.c
has changed, make would rebuild all the *.bpf.o, *.skel.h and *.test.o
objects, which is a lot of unnecessary work.
A typical dependency chain is:
progs/x.c -> x.bpf.o -> x.skel.h -> x.test.o -> trunner_binary
However for many tests it's not a 1:1 mapping by name, and so far
%.test.o have been simply dependent on all %.skel.h files, and
%.skel.h files on all %.bpf.o objects.
Avoid full rebuilds by instructing the compiler (via -MMD) to
produce *.d files with real dependencies, and appropriately including
them. Exploit make feature that rebuilds included makefiles if they
were changed by setting %.test.d as prerequisite for %.test.o files.
A couple of examples of compilation time speedup (after the first
clean build):
$ touch progs/verifier_and.c && time make -j8
Before: real 0m16.651s
After: real 0m2.245s
$ touch progs/read_vsyscall.c && time make -j8
Before: real 0m15.743s
After: real 0m1.575s
A drawback of this change is that now there is an overhead due to make
processing lots of .d files, which potentially may slow down unrelated
targets. However a time to make all from scratch hasn't changed
significantly:
$ make clean && time make -j8
Before: real 1m31.148s
After: real 1m30.309s
Suggested-by: Eduard Zingerman <eddyz87@gmail.com>
Signed-off-by: Ihor Solodrai <ihor.solodrai@pm.me>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/VJihUTnvtwEgv_mOnpfy7EgD9D2MPNoHO-MlANeLIzLJPGhDeyOuGKIYyKgk0O6KPjfM-MuhtvPwZcngN8WFqbTnTRyCSMc2aMZ1ODm1T_g=@pm.me
Single characters should be put into a sequence.
Thus use the corresponding function “seq_putc” for two selected calls.
This issue was transformed by using the Coccinelle software.
Suggested-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/abde0992-3d71-44d2-ab27-75b382933a22@web.de
Single line breaks should occasionally be put into a sequence.
Thus use the corresponding function “seq_putc”.
This issue was transformed by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/e26b7df9-cd63-491f-85e8-8cabe60a85e5@web.de
Geliang Tang says:
====================
v3:
- patch 2:
- clear errno before connect_to_fd_opts.
- print err logs in run_test.
- set err to -1 when fd >= 0.
- patch 3:
- drop "int err".
v2:
- update patch 2 as Martin suggested.
This is the 9th part of series "use network helpers" all BPF selftests
wide.
Patches 1-2 update network helpers interfaces suggested by Martin.
Patch 3 adds a new helper connect_to_addr_str() as Martin suggested
instead of adding connect_fd_to_addr_str().
Patch 4 uses this newly added helper in make_client().
Patch 5 uses make_client() in sk_lookup and drop make_socket().
====================
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Similar to connect_to_addr() helper for connecting to a server with the
given sockaddr_storage type address, this patch adds a new helper named
connect_to_addr_str() for connecting to a server with the given string
type address "addr_str", together with its "family" and "port" as other
parameters of connect_to_addr_str().
In connect_to_addr_str(), the parameters "family", "addr_str" and "port"
are used to create a sockaddr_storage type address "addr" by invoking
make_sockaddr(). Then pass this "addr" together with "addrlen", "type"
and "opts" to connect_to_addr().
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/647e82170831558dbde132a7a3d86df660dba2c4.1721282219.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The struct member "must_fail" of network_helper_opts() is only used in
cgroup_v1v2 tests, it makes sense to drop it from network_helper_opts.
Return value (fd) of connect_to_fd_opts() and the expect errno (EPERM)
can be checked in cgroup_v1v2.c directly, no need to check them in
connect_fd_to_addr() in network_helpers.c.
This also makes connect_fd_to_addr() function useless. It can be replaced
by connect().
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/3faf336019a9a48e2e8951f4cdebf19e3ac6e441.1721282219.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
The "type" parameter of connect_to_fd_opts() is redundant of "server_fd".
Since the "type" can be obtained inside by invoking getsockopt(SO_TYPE),
without passing it in as a parameter.
This patch drops the "type" parameter of connect_to_fd_opts() and updates
its callers.
Suggested-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Link: https://lore.kernel.org/r/50d8ce7ab7ab0c0f4d211fc7cc4ebe3d3f63424c.1721282219.git.tanggeliang@kylinos.cn
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Document TI TPS546D24 TPS546D24A 2.95-V to 16-V, 40-A, Up to 4x Stackable,
PMBus Buck Converter as trivial device. Linux kernel does have an existing
driver using the compatible documented here.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240725180337.64396-1-marex@denx.de
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Convert the bindings for the External Bus Interface on apq8060 and
msm8660 from the old text format to yaml.
Signed-off-by: Rayyan Ansari <rayyan.ansari@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240717131030.51419-1-rayyan.ansari@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Wrong compatible strings are used for AD411x devices.
Fix by adding the missing "adi," prefix.
Fixes: 13d12e3ad1 ("iio: adc: ad7173: Add support for AD411x devices")
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240723111322.324947-1-dumitru.ceclan@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
If dma_get_slave_caps() fails, we need to release the dma channel before
returning an error to avoid leaking the channel.
Fixes: 2d6ca60f32 ("iio: Add a DMAengine framework based buffer")
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240723-iio-fix-dmaengine-free-on-error-v1-1-2c7cbc9b92ff@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current implementation attempts to recover from an eventual glitch
in the clock by checking frstdata state after reading the first
channel's sample: If frstdata is low, it will reset the chip and
return -EIO.
This will only work in parallel mode, where frstdata pin is set low
after the 2nd sample read starts.
For the serial mode, according to the datasheet, "The FRSTDATA output
returns to a logic low following the 16th SCLK falling edge.", thus
after the Xth pulse, X being the number of bits in a sample, the check
will always be true, and the driver will not work at all in serial
mode if frstdata(optional) is defined in the devicetree as it will
reset the chip, and return -EIO every time read_sample is called.
Hence, this check must be removed for serial mode.
Fixes: b9618c0cac ("staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4")
Signed-off-by: Guillaume Stols <gstols@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240702-cleanup-ad7606-v3-1-18d5ea18770e@baylibre.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
In ad9834_write_frequency() clk_get_rate() can return 0. In such case
ad9834_calc_freqreg() call will lead to division by zero. Checking
'if (fout > (clk_freq / 2))' doesn't protect in case of 'fout' is 0.
ad9834_write_frequency() is called from ad9834_write(), where fout is
taken from text buffer, which can contain any value.
Modify parameters checking.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 12b9d5bf76 ("Staging: IIO: DDS: AD9833 / AD9834 driver")
Suggested-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/20240703154506.25584-1-amishin@t-argos.ru
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
A SAR sensor from NanjingTianyihexin Electronics Ltd.
The device has the following entry points:
Usual frequency:
- sampling_frequency
Instant reading of current values for different sensors:
- in_proximity0_raw
- in_proximity1_raw
- in_proximity2_raw
- in_proximity3_raw
- in_proximity4_raw
and associated events in events/
Signed-off-by: Yasin Lee <yasin.lee.x@gmail.com>
Link: https://patch.msgid.link/20240702-add-tyhx-hx9023s-sensor-driver-v9-3-c030f1801d9b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Add check for the return value of spi_setup() and return the error
if it fails in order to catch the error.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://patch.msgid.link/20240705084250.3006527-1-nichen@iscas.ac.cn
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
