Move SoundWire endpoint parsing helper functions to common place holder.
These functions will be used by other platform machine driver code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-5-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move Soundwire endpoint and dai link structures from Intel generic machine
driver code to common place holder(soc_sdw_utils.h). These structures will
be used in other platform SoundWire machine driver code.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-4-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename SoundWire parsing helper functions with 'asoc_sdw' tag
to make it generic.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Rename SoundWire endpoint and dai link structures with asoc tag to make it
generic.
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20240913090631.1834543-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on xtensa.
[ paulmck: Apply kernel test robot feedback. ]
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
[ Apply Geert Uytterhoeven feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Tested-by: Yujie Liu <yujie.liu@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org>
Use the new cmpxchg_emu_u8() to emulate one-byte cmpxchg() on sh.
[ paulmck: Drop two-byte support per Arnd Bergmann feedback. ]
[ paulmck: Apply feedback from Naresh Kamboju. ]
[ Apply Geert Uytterhoeven feedback. ]
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: <linux-sh@vger.kernel.org>
Acked-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Avoid removing these controls, as doing so can cause issues if the stream
is initiated from another control. Ensure these controls remain intact when
the stream is started or finished. Instead of removing them, return an
-EBUSY error code to indicate that the controller is busy, especially when
the audio filter and the SINC filter are in use.
[andrei.simion@microchip.com: Reword the commit title and the commit
message. Replace spinlock and busy variable with atomic_t busy_stream.]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240913120621.79088-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some comments here are referring to a non-existent
regulator_ops::get_voltage_vsel() where ::get_voltage_sel() is meant,
and similar for ::set_voltage_vsel() / ::set_voltage_sel().
Update the comments.
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Link: https://patch.msgid.link/20240913-regulator-typos-v1-1-92781c93f638@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Use irq_get_trigger_type() to replace irq_get_irq_data() and then
irqd_get_trigger_type(), if the irq data is NULL it will return 0.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240913013503.3754712-1-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
I can't find any use of 'attribute_container_add_class_device_adapter'
or 'attribute_container_trigger' in git history.
Their export decls went in 2006:
commit 1740757e8f ("[PATCH] Driver Core: remove unused exports")
and their docs disappeared in 2016:
commit 47cb398dd7 ("Docs: sphinxify device-drivers.tmpl")
Remove them.
Signed-off-by: Dr. David Alan Gilbert <linux@treblig.org>
Link: https://lore.kernel.org/r/20240913010955.1393995-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use irq_get_trigger_type() to replace irq_get_irq_data() and then
irqd_get_trigger_type(), if the irq data is NULL it will return 0.
No functional changed.
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Link: https://patch.msgid.link/20240913074632.3779321-1-ruanjinjie@huawei.com
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
The PCI vendor ID for Cadence is defined in pci_ids.h. Use it.
While at it, move to PCI_DEVICE() macro and usual pattern for
PCI class and device IDs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240913131710.3630560-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The PCI vendor ID for Cadence is defined in pci_ids.h. Use it.
While at it, move to PCI_DEVICE() macro and usual pattern for
PCI class and device IDs.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240913132125.3630860-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
- Add support for a new Goodix HID over SPI driver (Charles Wang)
Note: this driver doesn't rely on the spefication of HID over SPI
provided by Microsoft, thus needs a separate driver, not a generic bus
transport low level driver.
Various Wacom fixes (Jason Gerecke):
- Support for high-resolution wheel scrolling
- Support touchrings with relative motion
- Support devices with two touchrings
- Support sequence numbers smaller than 16-bit
Add reg-name: "dbi2", "atu" for i.MX8M PCIe Endpoint.
For i.MX8M PCIe EP, the dbi2 and atu addresses are pre-defined in the
driver. This method is not good.
In commit b7d67c6130 ("PCI: imx6: Add iMX95 Endpoint (EP) support"),
Frank suggests to fetch the dbi2 and atu from DT directly. This commit is
preparation to do that for i.MX8M PCIe EP.
These changes wouldn't break driver function. When "dbi2" and "atu"
properties are present, i.MX PCIe driver would fetch the according base
addresses from DT directly. If only two reg properties are provided, i.MX
PCIe driver would fall back to the old method.
Link: https://lore.kernel.org/linux-pci/1723534943-28499-2-git-send-email-hongxing.zhu@nxp.com
Signed-off-by: Richard Zhu <hongxing.zhu@nxp.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Convert the devicetree bindings for the Altera PCIe MSI controller
from text to YAML.
Link: https://lore.kernel.org/linux-pci/20240717181756.2177553-1-matthew.gerlach@linux.intel.com
Signed-off-by: Matthew Gerlach <matthew.gerlach@linux.intel.com>
[kwilczynski: remove unused msi0 label]
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
In case vmmc or vqmmc regulator is not available yet, use dev_err_probe
in order to set a deferred probe reason. This is a helpful hint in
/sys/kernel/debug/devices_deferred
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20240911090910.3060749-1-alexander.stein@ew.tq-group.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Commit 9094e53ff5 ("pmdomain: core: Use dev_name() instead of
kobject_get_path() in debugfs") severely shortened the names of devices
in a PM Domain. Now the most common format[1] consists of a 32-bit
unit-address (8 characters), followed by a dot and a node name (20
characters for "air-pollution-sensor" and "interrupt-controller", which
are the longest generic node names documented in the Devicetree
Specification), for a typical maximum of 29 characters.
This offers a good opportunity to reduce the table width of the debug
summary:
- Reduce the device name field width from 50 to 30 characters, which
matches the PM Domain name width,
- Reduce the large inter-column space between the "performance" and
"managed by" columns.
Visual impact:
- The "performance" column now starts at a position that is a
multiple of 16, just like the "status" and "children" columns,
- All of the "/device", "runtime status", and "managed by" columns are
now indented 4 characters more than the columns right above them,
- Everything fits in (one less than) 80 characters again ;-)
[1] Note that some device names (e.g. TI AM335x interconnect target
modules) do not follow this convention, and may be much longer, but
these didn't fit in the old 50-character column width either.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/f8e1821364b6d5d11350447c128f6d2b470f33fe.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Move mode_status_str() below perf_status_str(), to make declaration
order match calling order of the various *_status_str() helpers.
While at it, add a blank line for consistency among the three helpers.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/18ed6fb2bb92860f3af1bc7e5e4a01e9dacf2126.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The "performance" column contains variable-width values. Hence when
their printed values contain more than one digit, all values in
successive columns become misaligned.
Fix this by formatting it as a fixed-width field. Adjust successive
spaces and field widths to retain the exiting layout.
Fixes: 0155aaf95a ("PM: domains: Add the domain HW-managed mode to the summary")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/e004f9d2a75e9a49c269507bb8a4514001751e85.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The inter-column space in the debug summary is two spaces. However, in
one case, the extra space is handled implicitly in a field width
specifier. Make inter-column space explicit to ease future maintenance.
Fixes: 45fbc464b0 ("PM: domains: Add "performance" column to debug summary")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/ae61eb363621b981edde878e1e74d701702a579f.1725459707.git.geert+renesas@glider.be
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The size of the mux stride was off by one, which could result in
invalid pin configuration on the device side or invalid state
readings on the software side.
While on it also update the code and:
- Increase the mux stride size to 16
- Align the virtual muxed regmap range to 16
- Start the regmap window at the selector
- Mark reserved registers as not-readable
Fixes: 8670de9fae ("pinctrl: cy8c95x0: Use regmap ranges")
Signed-off-by: Patrick Rudolph <patrick.rudolph@9elements.com>
Reported-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Link: https://lore.kernel.org/20240902072859.583490-1-patrick.rudolph@9elements.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This includes a new ACPI ID that is added to the Intel Meteor Lake
driver to support recent Intel Arrow Lake hardware.
-----BEGIN PGP SIGNATURE-----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=Mbpf
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v6.11-1
This includes a new ACPI ID that is added to the Intel Meteor Lake
driver to support recent Intel Arrow Lake hardware.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The RK3576 SoC needs to ungate the power domains before their status can
be modified.
The values have been taken from the rockchip downstream driver.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20240829202732.75961-3-detlev.casanova@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Some rockchip SoC need to ungate power domains before their power status
can be changed.
Each power domain has a gate mask that is set to 1 to ungate it when
manipulating power status, then set back to 0 to gate it again.
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Link: https://lore.kernel.org/r/20240829202732.75961-2-detlev.casanova@collabora.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Drop OF node reference immediately after using it in
syscon_node_to_regmap(), which is both simpler and typical/expected
code pattern.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20240825183116.102953-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This variable is only used within the probe() function, so let's remove
it from the context and define it locally within the same function.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240825143428.556439-3-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The removed code was added to handle the case where the power domain is
already on during the driver's probing. In this use case, the "is_off"
parameter is passed as false to pm_genpd_init() to inform it not to call
the power_on() callback, as it's unnecessary to perform the hardware
power-on procedure since the power domain is already on. Therefore, with
the call to clk_bulk_prepare_enable() by probe(), the system is in the
same operational state as when "is_off" is passed as true after the
power_on() callback execution:
probe() -> is_off == true -> clk_bulk_prepare_enable() called by power_on()
probe() -> is_off == false -> clk_bulk_prepare_enable() called by probe()
Reaching the same logical and operational state, it follows that upon
driver removal, there is no need to perform different actions depending
on the power domain's on/off state during probing.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Link: https://lore.kernel.org/r/20240825143428.556439-2-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This way, the code becomes more compact, and dev_err_probe() is used in
every error path of the probe() function.
Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20240825143428.556439-1-dario.binacchi@amarulasolutions.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Instead of directly casting and returning (void *) pointer, use ERR_CAST
to explicitly return an error-valued pointer. This makes the error handling
more explicit and improves code clarity.
Signed-off-by: Chen Yufan <chenyufan@vivo.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When entering the "len & sizeof(u32)" branch, len must be less than 8.
So after one operation, len must be less than 4.
At this time, "len -= sizeof(u32)" is not necessary for 64-bit CPUs.
After that, replace `while' loops with equivalent `for' to make the
code structure a little bit better by the way.
Suggested-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/all/alpine.DEB.2.21.2406281713040.43454@angie.orcam.me.uk/
Suggested-by: Herbert Xu <herbert@gondor.apana.org.au>
Link: https://lore.kernel.org/all/ZtqZpzMH_qMQqzyc@gondor.apana.org.au/
Signed-off-by: Guan Wentao <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
