It is reported that commit 9502108876 ("thermal: core: Drop
trips_disabled bitmask") causes the maximum frequency of CPUs to drop
further down with every system sleep-wake cycle on Intel Core i7-4710HQ.
This turns out to be due to a trip point whose temperature is equal to 0
degrees Celsius which is acted on every time the system wakes from sleep.
Before commit 9502108876 this trip point would be disabled wia the
trips_disabled bitmask, but now it is treated as a valid one.
Since ACPI thermal control is generally about protection against
overheating, trip points with temperature of 0 centigrade or below are
not particularly useful there, so initialize them all as invalid which
fixes the problem at hand.
Fixes: 9502108876 ("thermal: core: Drop trips_disabled bitmask")
Closes: https://lore.kernel.org/linux-pm/3f71747b-f852-4ee0-b384-cf46b2aefa3f@gmx.com
Reported-by: Tibor Billes <tbilles@gmx.com>
Tested-by: Tibor Billes <tbilles@gmx.com>
Cc: 6.7+ <stable@vger.kernel.org> # 6.7+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
It is reported that commit 31a0fa0019 ("thermal/debugfs: Pass cooling
device state to thermal_debug_cdev_add()") causes the ACPI fan driver
to fail probing on some systems which turns out to be due to the _FST
control method returning an invalid value until _FSL is first evaluated
for the given fan. If this happens, the .get_cur_state() cooling device
callback returns an error and __thermal_cooling_device_register() fails
as uses that callback after commit 31a0fa0019.
Arguably, _FST should not return an invalid value even if it is
evaluated before _FSL, so this may be regarded as a platform firmware
issue, but at the same time it is not a good enough reason for failing
the cooling device registration where the initial cooling device state
is only needed to initialize a thermal debug facility.
Accordingly, modify __thermal_cooling_device_register() to avoid
calling thermal_debug_cdev_add() instead of returning an error if the
initial .get_cur_state() callback invocation fails.
Fixes: 31a0fa0019 ("thermal/debugfs: Pass cooling device state to thermal_debug_cdev_add()")
Closes: https://lore.kernel.org/linux-acpi/20240530153727.843378-1-laura.nao@collabora.com
Reported-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Tested-by: Laura Nao <laura.nao@collabora.com>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/omap-rng.o
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/char/hw_random/omap3-rom-rng.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/crypto/xilinx/zynqmp-aes-gcm.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Reviewed-by: Michal Simek <michal.simek@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/crypto/sa2ul.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/crypto/intel/keembay/keembay-ocs-hcu.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
make allmodconfig && make W=1 C=1 reports:
WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/crypto/atmel-sha204a.o
Add the missing invocation of the MODULE_DESCRIPTION() macro.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Rewrite the AES-NI implementations of AES-GCM, taking advantage of
things I learned while writing the VAES-AVX10 implementations. This is
a complete rewrite that reduces the AES-NI GCM source code size by about
70% and the binary code size by about 95%, while not regressing
performance and in fact improving it significantly in many cases.
The following summarizes the state before this patch:
- The aesni-intel module registered algorithms "generic-gcm-aesni" and
"rfc4106-gcm-aesni" with the crypto API that actually delegated to one
of three underlying implementations according to the CPU capabilities
detected at runtime: AES-NI, AES-NI + AVX, or AES-NI + AVX2.
- The AES-NI + AVX and AES-NI + AVX2 assembly code was in
aesni-intel_avx-x86_64.S and consisted of 2804 lines of source and
257 KB of binary. This massive binary size was not really
appropriate, and depending on the kconfig it could take up over 1% the
size of the entire vmlinux. The main loops did 8 blocks per
iteration. The AVX code minimized the use of carryless multiplication
whereas the AVX2 code did not. The "AVX2" code did not actually use
AVX2; the check for AVX2 was really a check for Intel Haswell or later
to detect support for fast carryless multiplication. The long source
length was caused by factors such as significant code duplication.
- The AES-NI only assembly code was in aesni-intel_asm.S and consisted
of 1501 lines of source and 15 KB of binary. The main loops did 4
blocks per iteration and minimized the use of carryless multiplication
by using Karatsuba multiplication and a multiplication-less reduction.
- The assembly code was contributed in 2010-2013. Maintenance has been
sporadic and most design choices haven't been revisited.
- The assembly function prototypes and the corresponding glue code were
separate from and were not consistent with the new VAES-AVX10 code I
recently added. The older code had several issues such as not
precomputing the GHASH key powers, which hurt performance.
This rewrite achieves the following goals:
- Much shorter source and binary sizes. The assembly source shrinks
from 4300 lines to 1130 lines, and it produces about 9 KB of binary
instead of 272 KB. This is achieved via a better designed AES-GCM
implementation that doesn't excessively unroll the code and instead
prioritizes the parts that really matter. Sharing the C glue code
with the VAES-AVX10 implementations also saves 250 lines of C source.
- Improve performance on most (possibly all) CPUs on which this code
runs, for most (possibly all) message lengths. Benchmark results are
given in Tables 1 and 2 below.
- Use the same function prototypes and glue code as the new VAES-AVX10
algorithms. This fixes some issues with the integration of the
assembly and results in some significant performance improvements,
primarily on short messages. Also, the AVX and non-AVX
implementations are now registered as separate algorithms with the
crypto API, which makes them both testable by the self-tests.
- Keep support for AES-NI without AVX (for Westmere, Silvermont,
Goldmont, and Tremont), but unify the source code with AES-NI + AVX.
Since 256-bit vectors cannot be used without VAES anyway, this is made
feasible by just using the non-VEX coded form of most instructions.
- Use a unified approach where the main loop does 8 blocks per iteration
and uses Karatsuba multiplication to save one pclmulqdq per block but
does not use the multiplication-less reduction. This strikes a good
balance across the range of CPUs on which this code runs.
- Don't spam the kernel log with an informational message on every boot.
The following tables summarize the improvement in AES-GCM throughput on
various CPU microarchitectures as a result of this patch:
Table 1: AES-256-GCM encryption throughput improvement,
CPU microarchitecture vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
-------------------+-------+-------+-------+-------+-------+-------+
Intel Broadwell | 2% | 8% | 11% | 18% | 31% | 26% |
Intel Skylake | 1% | 4% | 7% | 12% | 26% | 19% |
Intel Cascade Lake | 3% | 8% | 10% | 18% | 33% | 24% |
AMD Zen 1 | 6% | 12% | 6% | 15% | 27% | 24% |
AMD Zen 2 | 8% | 13% | 13% | 19% | 26% | 28% |
AMD Zen 3 | 8% | 14% | 13% | 19% | 26% | 25% |
| 300 | 200 | 64 | 63 | 16 |
-------------------+-------+-------+-------+-------+-------+
Intel Broadwell | 35% | 29% | 45% | 55% | 54% |
Intel Skylake | 25% | 19% | 28% | 33% | 27% |
Intel Cascade Lake | 36% | 28% | 39% | 49% | 54% |
AMD Zen 1 | 27% | 22% | 23% | 29% | 26% |
AMD Zen 2 | 32% | 24% | 22% | 25% | 31% |
AMD Zen 3 | 30% | 24% | 22% | 23% | 26% |
Table 2: AES-256-GCM decryption throughput improvement,
CPU microarchitecture vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
-------------------+-------+-------+-------+-------+-------+-------+
Intel Broadwell | 3% | 8% | 11% | 19% | 32% | 28% |
Intel Skylake | 3% | 4% | 7% | 13% | 28% | 27% |
Intel Cascade Lake | 3% | 9% | 11% | 19% | 33% | 28% |
AMD Zen 1 | 15% | 18% | 14% | 20% | 36% | 33% |
AMD Zen 2 | 9% | 16% | 13% | 21% | 26% | 27% |
AMD Zen 3 | 8% | 15% | 12% | 18% | 23% | 23% |
| 300 | 200 | 64 | 63 | 16 |
-------------------+-------+-------+-------+-------+-------+
Intel Broadwell | 36% | 31% | 40% | 51% | 53% |
Intel Skylake | 28% | 21% | 23% | 30% | 30% |
Intel Cascade Lake | 36% | 29% | 36% | 47% | 53% |
AMD Zen 1 | 35% | 31% | 32% | 35% | 36% |
AMD Zen 2 | 31% | 30% | 27% | 38% | 30% |
AMD Zen 3 | 27% | 23% | 24% | 32% | 26% |
The above numbers are percentage improvements in single-thread
throughput, so e.g. an increase from 3000 MB/s to 3300 MB/s would be
listed as 10%. They were collected by directly measuring the Linux
crypto API performance using a custom kernel module. Note that indirect
benchmarks (e.g. 'cryptsetup benchmark' or benchmarking dm-crypt I/O)
include more overhead and won't see quite as much of a difference. All
these benchmarks used an associated data length of 16 bytes. Note that
AES-GCM is almost always used with short associated data lengths.
I didn't test Intel CPUs before Broadwell, AMD CPUs before Zen 1, or
Intel low-power CPUs, as these weren't readily available to me.
However, based on the design of the new code and the available
information about these other CPU microarchitectures, I wouldn't expect
any significant regressions, and there's a good chance performance is
improved just as it is above.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add implementations of AES-GCM for x86_64 CPUs that support VAES (vector
AES), VPCLMULQDQ (vector carryless multiplication), and either AVX512 or
AVX10. There are two implementations, sharing most source code: one
using 256-bit vectors and one using 512-bit vectors. This patch
improves AES-GCM performance by up to 162%; see Tables 1 and 2 below.
I wrote the new AES-GCM assembly code from scratch, focusing on
correctness, performance, code size (both source and binary), and
documenting the source. The new assembly file aes-gcm-avx10-x86_64.S is
about 1200 lines including extensive comments, and it generates less
than 8 KB of binary code. The main loop does 4 vectors at a time, with
the AES and GHASH instructions interleaved. Any remainder is handled
using a simple 1 vector at a time loop, with masking.
Several VAES + AVX512 implementations of AES-GCM exist from Intel,
including one in OpenSSL and one proposed for inclusion in Linux in 2021
(https://lore.kernel.org/linux-crypto/1611386920-28579-6-git-send-email-megha.dey@intel.com/).
These aren't really suitable to be used, though, due to the massive
amount of binary code generated (696 KB for OpenSSL, 200 KB for Linux)
and well as the significantly larger amount of assembly source (4978
lines for OpenSSL, 1788 lines for Linux). Also, Intel's code does not
support 256-bit vectors, which makes it not usable on future
AVX10/256-only CPUs, and also not ideal for certain Intel CPUs that have
downclocking issues. So I ended up starting from scratch. Usually my
much shorter code is actually slightly faster than Intel's AVX512 code,
though it depends on message length and on which of Intel's
implementations is used; for details, see Tables 3 and 4 below.
To facilitate potential integration into other projects, I've
dual-licensed aes-gcm-avx10-x86_64.S under Apache-2.0 OR BSD-2-Clause,
the same as the recently added RISC-V crypto code.
The following two tables summarize the performance improvement over the
existing AES-GCM code in Linux that uses AES-NI and AVX2:
Table 1: AES-256-GCM encryption throughput improvement,
CPU microarchitecture vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
----------------------+-------+-------+-------+-------+-------+-------+
Intel Ice Lake | 42% | 48% | 60% | 62% | 70% | 69% |
Intel Sapphire Rapids | 157% | 145% | 162% | 119% | 96% | 96% |
Intel Emerald Rapids | 156% | 144% | 161% | 115% | 95% | 100% |
AMD Zen 4 | 103% | 89% | 78% | 56% | 54% | 54% |
| 300 | 200 | 64 | 63 | 16 |
----------------------+-------+-------+-------+-------+-------+
Intel Ice Lake | 66% | 48% | 49% | 70% | 53% |
Intel Sapphire Rapids | 80% | 60% | 41% | 62% | 38% |
Intel Emerald Rapids | 79% | 60% | 41% | 62% | 38% |
AMD Zen 4 | 51% | 35% | 27% | 32% | 25% |
Table 2: AES-256-GCM decryption throughput improvement,
CPU microarchitecture vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
----------------------+-------+-------+-------+-------+-------+-------+
Intel Ice Lake | 42% | 48% | 59% | 63% | 67% | 71% |
Intel Sapphire Rapids | 159% | 145% | 161% | 125% | 102% | 100% |
Intel Emerald Rapids | 158% | 144% | 161% | 124% | 100% | 103% |
AMD Zen 4 | 110% | 95% | 80% | 59% | 56% | 54% |
| 300 | 200 | 64 | 63 | 16 |
----------------------+-------+-------+-------+-------+-------+
Intel Ice Lake | 67% | 56% | 46% | 70% | 56% |
Intel Sapphire Rapids | 79% | 62% | 39% | 61% | 39% |
Intel Emerald Rapids | 80% | 62% | 40% | 58% | 40% |
AMD Zen 4 | 49% | 36% | 30% | 35% | 28% |
The above numbers are percentage improvements in single-thread
throughput, so e.g. an increase from 4000 MB/s to 6000 MB/s would be
listed as 50%. They were collected by directly measuring the Linux
crypto API performance using a custom kernel module. Note that indirect
benchmarks (e.g. 'cryptsetup benchmark' or benchmarking dm-crypt I/O)
include more overhead and won't see quite as much of a difference. All
these benchmarks used an associated data length of 16 bytes. Note that
AES-GCM is almost always used with short associated data lengths.
The following two tables summarize how the performance of my code
compares with Intel's AVX512 AES-GCM code, both the version that is in
OpenSSL and the version that was proposed for inclusion in Linux.
Neither version exists in Linux currently, but these are alternative
AES-GCM implementations that could be chosen instead of mine. I
collected the following numbers on Emerald Rapids using a userspace
benchmark program that calls the assembly functions directly.
I've also included a comparison with Cloudflare's AES-GCM implementation
from https://boringssl-review.googlesource.com/c/boringssl/+/65987/3.
Table 3: VAES-based AES-256-GCM encryption throughput in MB/s,
implementation name vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
---------------------+-------+-------+-------+-------+-------+-------+
This implementation | 14171 | 12956 | 12318 | 9588 | 7293 | 6449 |
AVX512_Intel_OpenSSL | 14022 | 12467 | 11863 | 9107 | 5891 | 6472 |
AVX512_Intel_Linux | 13954 | 12277 | 11530 | 8712 | 6627 | 5898 |
AVX512_Cloudflare | 12564 | 11050 | 10905 | 8152 | 5345 | 5202 |
| 300 | 200 | 64 | 63 | 16 |
---------------------+-------+-------+-------+-------+-------+
This implementation | 4939 | 3688 | 1846 | 1821 | 738 |
AVX512_Intel_OpenSSL | 4629 | 4532 | 2734 | 2332 | 1131 |
AVX512_Intel_Linux | 4035 | 2966 | 1567 | 1330 | 639 |
AVX512_Cloudflare | 3344 | 2485 | 1141 | 1127 | 456 |
Table 4: VAES-based AES-256-GCM decryption throughput in MB/s,
implementation name vs. message length in bytes:
| 16384 | 4096 | 4095 | 1420 | 512 | 500 |
---------------------+-------+-------+-------+-------+-------+-------+
This implementation | 14276 | 13311 | 13007 | 11086 | 8268 | 8086 |
AVX512_Intel_OpenSSL | 14067 | 12620 | 12421 | 9587 | 5954 | 7060 |
AVX512_Intel_Linux | 14116 | 12795 | 11778 | 9269 | 7735 | 6455 |
AVX512_Cloudflare | 13301 | 12018 | 11919 | 9182 | 7189 | 6726 |
| 300 | 200 | 64 | 63 | 16 |
---------------------+-------+-------+-------+-------+-------+
This implementation | 6454 | 5020 | 2635 | 2602 | 1079 |
AVX512_Intel_OpenSSL | 5184 | 5799 | 2957 | 2545 | 1228 |
AVX512_Intel_Linux | 4394 | 4247 | 2235 | 1635 | 922 |
AVX512_Cloudflare | 4289 | 3851 | 1435 | 1417 | 574 |
So, usually my code is actually slightly faster than Intel's code,
though the OpenSSL implementation has a slight edge on messages shorter
than 256 bytes in this microbenchmark. (This also holds true when doing
the same tests on AMD Zen 4.) It can be seen that the large code size
(up to 94x larger!) of the Intel implementations doesn't seem to bring
much benefit, so starting from scratch with much smaller code, as I've
done, seems appropriate. The performance of my code on messages shorter
than 256 bytes could be improved through a limited amount of unrolling,
but it's unclear it would be worth it, given code size considerations
(e.g. caches) that don't get measured in microbenchmarks.
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Currently, the reg is queried based on the fixed address offset
array. When the number of accelerator cores changes, the system
can not flexibly respond to the change.
Therefore, the reg to be queried is calculated based on the
comp or decomp core base address.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When the vf is enabled, the value of vfs_num must be assigned
after the VF configuration is complete. Otherwise, the device
may be accessed before the virtual configuration is complete,
causing an error.
When the vf is disabled, clear vfs_num and execute
qm_pm_put_sync before hisi_qm_sriov_disable is return.
Otherwise, if qm_clear_vft_config fails, users may access the
device when the PCI virtualization is disabled, resulting in an
error.
Signed-off-by: Chenghai Huang <huangchenghai2@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The SM2 algorithm has a single user in the kernel. However, it's
never been integrated properly with that user: asymmetric_keys.
The crux of the issue is that the way it computes its digest with
sm3 does not fit into the architecture of asymmetric_keys. As no
solution has been proposed, remove this algorithm.
It can be resubmitted when it is integrated properly into the
asymmetric_keys subsystem.
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use sizeof(*priv) instead of sizeof(struct stm32_rng_private), the
former makes renaming of struct stm32_rng_private easier if necessary,
as it removes one site where such rename has to happen. No functional
change.
Signed-off-by: Marek Vasut <marex@denx.de>
Acked-by: Uwe Kleine-König <ukleinek@kernel.org>
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Place device pointer in struct stm32_rng_private and use it all over the
place to get rid of the horrible type casts throughout the driver.
No functional change.
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
include/linux/pm_runtime.h pm_runtime_get_sync() description suggests to
... consider using pm_runtime_resume_and_get() instead of it, especially
if its return value is checked by the caller, as this is likely to result
in cleaner code.
This is indeed better, switch to pm_runtime_resume_and_get() which
correctly suspends the device again in case of failure. Also add error
checking into the RNG driver in case pm_runtime_resume_and_get() does
fail, which is currently not done, and it does detect sporadic -EACCES
error return after resume, which would otherwise lead to a hang due to
register access on un-resumed hardware. Now the read simply errors out
and the system does not hang.
Acked-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
On x86, make allmodconfig && make W=1 C=1 warns:
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/crypto/crc32-pclmul.o
WARNING: modpost: missing MODULE_DESCRIPTION() in arch/x86/crypto/curve25519-x86_64.o
Add the missing MODULE_DESCRIPTION() macro invocations.
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since ecc_digits_from_bytes will provide zeros when an insufficient number
of bytes are passed in the input byte array, use it to convert the r and s
components of the signature to digits directly from the input byte
array. This avoids going through an intermediate byte array that has the
first few bytes filled with zeros.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since ecc_digits_from_bytes will provide zeros when an insufficient number
of bytes are passed in the input byte array, use it to create the hash
digits directly from the input byte array. This avoids going through an
intermediate byte array (rawhash) that has the first few bytes filled with
zeros.
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Fix the allmodconfig 'make W=1' warnings:
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/crypto/libchacha.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/crypto/libarc4.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/crypto/libdes.o
WARNING: modpost: missing MODULE_DESCRIPTION() in lib/crypto/libpoly1305.o
Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Some of the security attributes data is now populated from an HSTI
command on some processors, so show the message after it has been
populated.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Align the whitespace so that future messages will also be better
aligned.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
To prepare for other code that will manipulate security attributes
move the handling code out of sp-pci.c. No intended functional changes.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Making the capabilities register a union makes it easier to refer
to the members instead of always doing bit shifts.
No intended functional changes.
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Suggested-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The finalize operation in interrupt mode produce a produces a spinlock
recursion warning. The reason is the fact that BH must be disabled
during this process.
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This flag is needed to make the driver visible from openssl and cryptodev.
Signed-off-by: Maxime Méré <maxime.mere@st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increase STM32 CRYP priority, to be greater than the ARM-NEON
accelerated version.
Signed-of-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use DMA when buffer are aligned and with expected size.
If buffer are correctly aligned and bigger than 1KB we have some
performance gain:
With DMA enable:
$ openssl speed -evp aes-256-cbc -engine afalg -elapsed
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
aes-256-cbc 120.02k 406.78k 1588.82k 5873.32k 26020.52k 34258.94k
Without DMA:
$ openssl speed -evp aes-256-cbc -engine afalg -elapsed
The 'numbers' are in 1000s of bytes per second processed.
type 16 bytes 64 bytes 256 bytes 1024 bytes 8192 bytes 16384 bytes
aes-256-cbc 121.06k 419.95k 1112.23k 1897.47k 2362.03k 2386.60k
With DMA:
extract of
$ modprobe tcrypt mode=500
testing speed of async cbc(aes) (stm32-cbc-aes) encryption
tcrypt: test 14 (256 bit key, 16 byte blocks): 1 operation in 1679 cycles (16 bytes)
tcrypt: test 15 (256 bit key, 64 byte blocks): 1 operation in 1893 cycles (64 bytes)
tcrypt: test 16 (256 bit key, 128 byte blocks): 1 operation in 1760 cycles (128 bytes)
tcrypt: test 17 (256 bit key, 256 byte blocks): 1 operation in 2154 cycles (256 bytes)
tcrypt: test 18 (256 bit key, 1024 byte blocks): 1 operation in 2132 cycles (1024 bytes)
tcrypt: test 19 (256 bit key, 1424 byte blocks): 1 operation in 2466 cycles (1424 bytes)
tcrypt: test 20 (256 bit key, 4096 byte blocks): 1 operation in 4040 cycles (4096 bytes)
Without DMA:
$ modprobe tcrypt mode=500
tcrypt: test 14 (256 bit key, 16 byte blocks): 1 operation in 1671 cycles (16 bytes)
tcrypt: test 15 (256 bit key, 64 byte blocks): 1 operation in 2263 cycles (64 bytes)
tcrypt: test 16 (256 bit key, 128 byte blocks): 1 operation in 2881 cycles (128 bytes)
tcrypt: test 17 (256 bit key, 256 byte blocks): 1 operation in 4270 cycles (256 bytes)
tcrypt: test 18 (256 bit key, 1024 byte blocks): 1 operation in 11537 cycles (1024 bytes)
tcrypt: test 19 (256 bit key, 1424 byte blocks): 1 operation in 15025 cycles (1424 bytes)
tcrypt: test 20 (256 bit key, 4096 byte blocks): 1 operation in 40747 cycles (4096 bytes)
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Signed-off-by: Maxime Méré <maxime.mere@foss.st.com>
Signed-off-by: Nicolas Toromanoff <nicolas.toromanoff@foss.st.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Public key blob is not just x and y concatenated. It follows RFC5480
section 2.2. Address this by re-documenting the function with the
correct description of the format.
Link: https://datatracker.ietf.org/doc/html/rfc5480
Fixes: 4e6602916b ("crypto: ecdsa - Add support for ECDSA signature verification")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Reviewed-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
amd_rng_mod_init() uses pci_read_config_dword() that returns PCIBIOS_*
codes. The return code is then returned as is but amd_rng_mod_init() is
a module_init() function that should return normal errnos.
Convert PCIBIOS_* returns code using pcibios_err_to_errno() into normal
errno before returning it.
Fixes: 96d63c0297 ("[PATCH] Add AMD HW RNG driver")
Cc: stable@vger.kernel.org
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Since crypto_shash_setkey(), crypto_ahash_setkey(),
crypto_skcipher_setkey(), and crypto_aead_setkey() apparently need to
work in no-SIMD context on some architectures, make the self-tests cover
this scenario. Specifically, sometimes do the setkey while under
crypto_disable_simd_for_test(), and do this independently from disabling
SIMD for the other parts of the crypto operation since there is no
guarantee that all parts happen in the same context. (I.e., drivers
mustn't store the key in different formats for SIMD vs. no-SIMD.)
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The VBT spec does a very poor job of defining how the chromaticity
coordinates in block 46 are laid out. After double checking the
Windows implementation it turns out these more or less match the
EDID definition, where the 10bit values are split into 2bit + 8bit
chunks. Adjust our struct definition to reflect that.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240605134756.17099-1-ville.syrjala@linux.intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
After switching from pages to folio [1], it became evident that
the initialization of .dirty_folio for page cache operations was missed for
compressed files.
[1] https://lore.kernel.org/ntfs3/20240422193203.3534108-1-willy@infradead.org
Fixes: 82cae269cf ("fs/ntfs3: Add initialization of super block")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
An additional condition causes the mft record to be read from disk
and get the file type dt_type.
Fixes: 22457c047e ("fs/ntfs3: Modified fix directory element type detection")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Attempting to retrieve an attribute data block in a compressed frame
is ignored.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Сorrected calculation of required space len (in clusters)
for attribute data storage in case of compression.
Fixes: be71b5cba2 ("fs/ntfs3: Add attrib operations")
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
To check the length of the volume label, the existing constant
NTFS_LABEL_MAX_LENGTH could be used.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Replaced the two loops reading $AttrDef and $UpCase with
the inode_read_data() function.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
COMPRESSION_UNIT and NTFS_LZNT_CUNIT mean the same thing
(1u<<NTFS_LZNT_CUNIT) determines the size for compression (in clusters).
COMPRESS_MAX_CLUSTER is not used in the code.
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Jijie Shao says:
====================
There are some bugfix for the HNS3 ethernet driver
There are some bugfix for the HNS3 ethernet driver
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently hns3 ring buffer init process would hold cpu too long with big
Tx/Rx ring depth. This could cause soft lockup.
So this patch adds cond_resched() to the process. Then cpu can break to
run other tasks instead of busy looping.
Fixes: a723fb8efe ("net: hns3: refine for set ring parameters")
Signed-off-by: Jie Wang <wangjie125@huawei.com>
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
