A lot of the various HDMI drivers duplicate some logic that depends on
the HDMI spec itself and not really a particular hardware
implementation.
Output BPC or format selection, infoframe generation are good examples
of such areas.
This creates a lot of boilerplate, with a lot of variations, which makes
it hard for userspace to rely on, and makes it difficult to get it right
for drivers.
In the next patches, we'll add a lot of infrastructure around the
drm_connector and drm_connector_state structures, which will allow to
abstract away the duplicated logic. This infrastructure comes with a few
requirements though, and thus we need a new initialization function.
Hopefully, this will make drivers simpler to handle, and their behaviour
more consistent.
Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Reviewed-by: Sui Jingfeng <sui.jingfeng@linux.dev>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240527-kms-hdmi-connector-state-v15-1-c5af16c3aae2@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Switch from defining the PHY inside the AVB node itself and create a
dedicated MDIO node for AVB0, the only AVB describing a PHY. This is
needed as adding PHYs to AVB1 and AVB2 will require setting MDIO bus
parameters and thus requires a dedicated node.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20240413141806.300989-2-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
The functions __kmalloc_noprof(), kmalloc_large_noprof(),
kmalloc_trace_noprof() and their _node variants are all internal to the
implementations of kmalloc_noprof() and kmalloc_node_noprof() and are
only declared in the "public" slab.h and exported so that those
implementations can be static inline and distinguish the build-time
constant size variants. The only other users for some of the internal
functions are slub_kunit and fortify_kunit tests which make very
short-lived allocations.
Therefore we can stop wrapping them with the alloc_hooks() macro.
Instead add a __ prefix to all of them and a comment documenting these
as internal. Also rename __kmalloc_trace() to __kmalloc_cache() which is
more descriptive - it is a variant of __kmalloc() where the exact
kmalloc cache has been already determined.
The usage in fortify_kunit can be removed completely, as the internal
functions should be tested already through kmalloc() tests in the
test variant that passes non-constant allocation size.
Reported-by: Kent Overstreet <kent.overstreet@linux.dev>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Kees Cook <keescook@chromium.org>
Reviewed-by: Kent Overstreet <kent.overstreet@linux.dev>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
Release the submission_state lock if alloc_guc_id() fails.
v2: Add Fixes tag and CC stable kernel
Fixes: dd08ebf6c3 ("drm/xe: Introduce a new DRM driver for Intel GPUs")
Cc: <stable@vger.kernel.org> # v6.8+
Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240521201711.4934-1-niranjana.vishwanathapura@intel.com
(cherry picked from commit 40672b792a)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The GuC context scheduling queue is 2 entires deep, thus it is possible
for a migration job to be stuck behind a fault if migration exec queue
shares engines with user jobs. This can deadlock as the migrate exec
queue is required to service page faults. Avoid deadlock by only using
reserved BCS instances for usm migrate exec queue.
Fixes: a043fbab7a ("drm/xe/pvc: Use fast copy engines as migrate engine on PVC")
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240415190453.696553-2-matthew.brost@intel.com
Reviewed-by: Brian Welty <brian.welty@intel.com>
(cherry picked from commit 04f4a70a18)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Polling is initially attempted with timeout_base_ms enabled for
preemption, and if it exceeds this timeframe, another attempt is made
without preemption, allowing an additional 50 ms before timing out.
v2
- Rebase
v3
- Move warnings to separate patch (Lucas)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Fixes: 7dc9b92dcf ("drm/xe: Remove i915_utils dependency from xe_pcode.")
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240508152216.3263109-2-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit c81858eb52)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
The patch updates the function documentation comment for
longhaul_setstate to adhere to the kernel-doc specification.
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
A recent commit updated the code mistakenly to return directly on
errors, without doing the required cleanups. Fix it.
Fixes: 2a56c462fe ("OPP: Fix required_opp_tables for multiple genpds using same table")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/202405180016.4fbn86bm-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Make use of the __free() macro to automate memory deallocation when
the existing device nodes get out of scope, removing the need for
of_node_put() and therefore increasing code safety if more error paths
are added to the driver, which could miss the required of_node_put()
as it already occurred with commit '57f2f8b4aa ("cpufreq: qcom:
Refactor the driver to make it easier to extend")'.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The code refactoring added new error paths between the np device node
allocation and the call to of_node_put(), which leads to memory leaks if
any of those errors occur.
Add the missing of_node_put() in the error paths that require it.
Cc: stable@vger.kernel.org
Fixes: 57f2f8b4aa ("cpufreq: qcom: Refactor the driver to make it easier to extend")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The buffer flags is set by wrong due to wrong parentheses, the
FL_INCOMING flag is never taken an account.
Fix it by wrapping the ternary conditional operation with parentheses.
Fixes: 3c1dfb5a69 ("media: intel/ipu6: input system video nodes and buffer queues")
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
If an error occurs after a successful alloc_fw_msg_bufs() call, some
resources should be released as already done in the remove function.
Add a new free_fw_msg_bufs() function that releases what has been allocated
by alloc_fw_msg_bufs().
Also use this new function in isys_remove() to avoid some code duplication.
Fixes: f50c4ca0a8 ("media: intel/ipu6: add the main input system driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
In preparation to fixing a leak in isys_probe(), move isys_remove().
The fix will introduce a new function that will also be called from
isys_remove(). The code needs to be rearranged to avoid a forward
declaration.
Having the .remove function close to the .probe function is also more
standard.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
pcim_iomap_regions() and pcim_enable_device() are used in the probe. So
the corresponding managed resources don't need to be freed explicitly in
the remove function.
Remove the incorrect pci_release_regions() and pci_disable_device() calls.
Fixes: 25fedc0219 ("media: intel/ipu6: add Intel IPU6 PCI device driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
The documentation in one occasion mentions the
VIDIOC_SUBDEV_STREAM_FL_ACTIVE flag. This was meant to be
V4L2_SUBDEV_STREAM_FL_ACTIVE as it's a flag, not an IOCTL. Fix it.
Fixes: cd2c75454d ("media: Documentation: Document S_ROUTING behaviour")
Reported-by: Samuel Wein PhD <sam@samwein.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Current documentation does not describe how Linux handles the synthetic
interrupt controller (synic) that Hyper-V provides to guest VMs, nor how
VMBus or timer interrupts are handled. Add text describing the synic and
reorganize existing text to make this more clear.
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240511133818.19649-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240511133818.19649-2-mhklinux@outlook.com>
Update spelling from "VMbus" to "VMBus" to match Hyper-V product
documentation. Also correct typo: "SNP-SEV" should be "SEV-SNP".
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Reviewed-by: Easwar Hariharan <eahariha@linux.microsoft.com>
Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240511133818.19649-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240511133818.19649-1-mhklinux@outlook.com>
Packed struct vmbus_bufring is 4096 byte aligned and the reporting
warning is for the first member of that struct which shouldn't add
any offset to create alignment issue.
Suppress the warning by adding -Wno-address-of-packed-member flag to
gcc.
Fixes: 45bab4d746 ("tools: hv: Add vmbus_bufring")
Reported-by: kernel test robot <yujie.liu@intel.com>
Closes: https://lore.kernel.org/all/202404121913.GhtSoKbW-lkp@intel.com/
Signed-off-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Link: https://lore.kernel.org/r/1714973938-4063-1-git-send-email-ssengar@linux.microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <1714973938-4063-1-git-send-email-ssengar@linux.microsoft.com>
The Hyper-V balloon driver supports hot-add of memory in addition
to ballooning. Current code hot-adds in fixed size chunks of
128 MiB (fixed constant HA_CHUNK in the code). While this works
in Hyper-V VMs with 64 GiB or less or memory where the Linux
memblock size is 128 MiB, the hot-add fails for larger memblock
sizes because add_memory() expects memory to be added in chunks
that match the memblock size. Messages like the following are
reported when Linux has a 256 MiB memblock size:
[ 312.668859] Block size [0x10000000] unaligned hotplug range:
start 0x310000000, size 0x8000000
[ 312.668880] hv_balloon: hot_add memory failed error is -22
[ 312.668984] hv_balloon: Memory hot add failed
Larger memblock sizes are usually used in VMs with more than
64 GiB of memory, depending on the alignment of the VM's
physical address space.
Fix this problem by having the Hyper-V balloon driver determine
the Linux memblock size, and process hot-add requests in that
chunk size instead of a fixed 128 MiB. Also update the hot-add
alignment requested of the Hyper-V host to match the memblock
size.
The code changes look significant, but in fact are just a
simple text substitution of a new global variable for the
previous HA_CHUNK constant. No algorithms are changed except
to initialize the new global variable and to calculate the
alignment value to pass to Hyper-V. Testing with memblock
sizes of 256 MiB and 2 GiB shows correct operation.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240503154312.142466-2-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240503154312.142466-2-mhklinux@outlook.com>
Code sequences equivalent to ALIGN(), ALIGN_DOWN(), and umin() are
currently open coded. Change these to use the kernel macro to
improve code clarity. ALIGN() and ALIGN_DOWN() require the
alignment value to be a power of 2, which is the case here.
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: Michael Kelley <mhklinux@outlook.com>
Link: https://lore.kernel.org/r/20240503154312.142466-1-mhklinux@outlook.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Message-ID: <20240503154312.142466-1-mhklinux@outlook.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmZBML0eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGt3MH/3r3+FUQy4GWJARA
T7Q2AB36dHI5dA5N3Q1t3L4VVgeypjy5ZScgMi5J4MtEr2m3z2akjWH9+SVnFxMd
Nf7s4McY+461MpindBoGEKeJFsxXWiOqf8i+5lc6JGgHAjD1qiIjD5lFFirgTbeJ
vSd6wbzYwLp4145TM2J8R7xG5ib2DMk0Z0n3DcOmWVCTIJujSPCM7Wz+86w/vw2e
4hkqPrcmQS3CGov/fOMnSvALkA6MegWmpvYv3/z7Kj6yq3TEz5sYKR9FZzRxj7bm
FoW0T7gkxHXGODnQsD7Ex4CG+XYfUyv8H2LgImYAk8sjMZWD8sTzOuGM8g89RLS+
tvGYU9U=
=MG7d
-----END PGP SIGNATURE-----
Merge tag 'v6.9' into next
Sync up with the mainline to bring in the new cleanup API.
Conversion of target_freq to HZ in scmi_cpufreq_fast_switch()
can lead to overflow if the multiplied result is greater than
UINT_MAX, since type of target_freq is unsigned int. Avoid this
overflow by assigning target_freq to unsigned long variable for
converting it to HZ.
Signed-off-by: Jagadeesh Kona <quic_jkona@quicinc.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Make use of the __free() cleanup handler to automatically free nodes
when they get out of scope.
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
The for_each_child_of_node() loop does not decrement the child node
refcount before the break instruction, even though the node is no
longer required.
This can be avoided with the new for_each_child_of_node_scoped() macro
that removes the need for any of_node_put().
Fixes: fa5aec9561 ("cpufreq: sun50i: Add support for opp_supported_hw")
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Store the blk_status per folio (if we can have multiple metapages per
folio) instead of setting the folio error flag. This will allow us to
reclaim a precious folio flag shortly.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
The last caller has been converted to i_blocks_per_folio() so we
can remove this wrapper.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Convert all the users to operate on a folio. Saves sixteen calls to
compound_head(). We still use sizeof(struct page) in print_hex_dump,
otherwise it will go into the second and third pages of the folio which
won't exist for jfs folios (since they are not large). This needs a
better solution, but finding it can be postponed.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Convert the mp->page to a folio and operate on it. That lets us
convert metapage_write_one() to take a folio. Replaces five calls to
compound_head() with one.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
All their callers now have a folio, so pass it in. Remove mp_anchor()
as inc_io() was the last user. No savings here, just cleaning up some
remnants.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Access folio->private directly instead of testing the page private flag.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Retrieve a folio from the page cache instead of a page. Saves a
couple of calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
This means also converting the two handlers to take a folio.
Saves four calls to compound_head().
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Matthieu Baerts says:
====================
selftests: mptcp: mark unstable subtests as flaky
Some subtests can be unstable, failing once every X runs. Fixing them
can take time: there could be an issue in the kernel or in the subtest,
and it is then important to do a proper analysis, not to hide real bugs.
To avoid creating noises on the different CIs where tests are more
unstable than on our side, some subtests have been marked as flaky. As a
result, errors with these subtests (if any) are ignored.
Note that the MPTCP CI will continue to track these flaky subtests. All
these unstable subtests are also tracked by our bug tracker.
These are fixes for the -net tree, because the instabilities are visible
there. The first patch introducing the flake support has no 'Fixes'
tags, mainly because it requires recent and important refactoring done
in all MPTCP selftests. Backporting that to old versions where the flaky
tests have been introduced would be too difficult, and probably not
worth it. The other patches, adding MPTCP_LIB_SUBTEST_FLAKY=1, have a
Fixes tag, simply to ease the backport of the future fixes removing them
along with the proper fix.
====================
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-0-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests are rarely unstable. It depends on the CI running the tests,
especially if it is also busy doing other tasks in parallel, and if a
debug kernel config is being used.
It looks like this issue is sometimes present with the NetDev CI. While
this is being investigated, the tests are marked as flaky not to create
noises on such CIs.
Fixes: b6e074e171 ("selftests: mptcp: add infinite map testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/491
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-4-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel, and if a debug kernel config is
being used.
It looks like this issue is often present with the NetDev CI. While this
is being investigated, the tests are marked as flaky not to create
noises on such CIs.
Fixes: 01542c9bf9 ("selftests: mptcp: add fastclose testcase")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/324
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-3-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
These tests are flaky since their introduction. This might be less or
not visible depending on the CI running the tests, especially if it is
also busy doing other tasks in parallel.
A first analysis shown that the transfer can be slowed down when there
are some re-injections at the MPTCP level. Such re-injections can of
course happen, and disturb the transfer, but it looks strange to have
them in this lab. That could be caused by the kernel having access to
less CPU cycles -- e.g. when other activities are executed in parallel
-- or by a misinterpretation on the MPTCP packet scheduler side.
While this is being investigated, the tests are marked as flaky not to
create noises in other CIs.
Fixes: 219d04992b ("mptcp: push pending frames when subflow has free space")
Link: https://github.com/multipath-tcp/mptcp_net-next/issues/475
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-2-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some subtests can be unstable, failing once every X runs. Fixing them
can take time: there could be an issue in the kernel or in the subtest,
and it is then important to do a proper analysis, not to hide real bugs.
To avoid creating noises on the different CIs, it is important to have a
simple way to mark subtests as flaky, and ignore the errors. This is
what this patch introduces: subtests can be marked as flaky by setting
MPTCP_LIB_SUBTEST_FLAKY env var to 1, e.g.
MPTCP_LIB_SUBTEST_FLAKY=1 <run flaky subtest>
The subtest will be executed, and errors (if any) will be ignored. It is
still good to run these subtests, as it exercises code, and the results
can still be useful for the on-going investigations.
Note that the MPTCP CI will continue to track these flaky subtests by
setting SELFTESTS_MPTCP_LIB_OVERRIDE_FLAKY env var to 1, and a ticket
has to be created before marking subtests as flaky.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240524-upstream-net-20240524-selftests-mptcp-flaky-v1-1-a352362f3f8e@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jacob Keller says:
====================
Intel Wired LAN Driver Updates 2024-05-23 (ice, idpf)
This series contains two fixes which finished up testing.
First, Alexander fixes an issue in idpf caused by enabling NAPI and
interrupts prior to actually allocating the Rx buffers.
Second, Jacob fixes the ice driver VSI VLAN counting logic to ensure that
addition and deletion of VLANs properly manages the total VSI count.
====================
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-0-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ice_vsi_add_vlan() function is used to add a VLAN filter for the target
VSI. This function prepares a filter in the switch table for the given VSI.
If it succeeds, the vsi->num_vlan counter is incremented.
It is not considered an error to add a VLAN which already exists in the
switch table, so the function explicitly checks and ignores -EEXIST. The
vsi->num_vlan counter is still incremented.
This seems incorrect, as it means we can double-count in the case where the
same VLAN is added twice by the caller. The actual table will have one less
filter than the count.
The ice_vsi_del_vlan() function similarly checks and handles the -ENOENT
condition for when deleting a filter that doesn't exist. This flow only
decrements the vsi->num_vlan if it actually deleted a filter.
The vsi->num_vlan counter is used only in a few places, primarily related
to tracking the number of non-zero VLANs. If the vsi->num_vlans gets out of
sync, then ice_vsi_num_non_zero_vlans() will incorrectly report more VLANs
than are present, and ice_vsi_has_non_zero_vlans() could return true
potentially in cases where there are only VLAN 0 filters left.
Fix this by only incrementing the vsi->num_vlan in the case where we
actually added an entry, and not in the case where the entry already
existed.
Fixes: a1ffafb0b4 ("ice: Support configuring the device to Double VLAN Mode")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-2-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, idpf enables NAPI and interrupts prior to allocating Rx
buffers.
This may lead to frame loss (there are no buffers to place incoming
frames) and even crashes on quick ifup-ifdown. Interrupts must be
enabled only after all the resources are here and available.
Split interrupt init into two phases: initialization and enabling,
and perform the second only after the queues are fully initialized.
Note that we can't just move interrupt initialization down the init
process, as the queues must have correct a ::q_vector pointer set
and NAPI already added in order to allocate buffers correctly.
Also, during the deinit process, disable HW interrupts first and
only then disable NAPI. Otherwise, there can be a HW event leading
to napi_schedule(), but the NAPI will already be unavailable.
Fixes: d4d5587182 ("idpf: initialize interrupts and enable vport")
Reported-by: Michal Kubiak <michal.kubiak@intel.com>
Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Krishneil Singh <krishneil.k.singh@intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://lore.kernel.org/r/20240523-net-2024-05-23-intel-net-fixes-v1-1-17a923e0bb5f@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After the tagged commit, @netdev got documented twice and the kdoc
script didn't notice that. Remove the second description added later
and move the initial one according to the field position.
After merging commit 5f8e4007c1 ("kernel-doc: fix
struct_group_tagged() parsing"), kdoc requires to describe struct
groups as well. &page_pool_params has 2 struct groups which
generated new warnings, describe them to resolve this.
Fixes: 403f11ac9a ("page_pool: don't use driver-set flags field directly")
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Link: https://lore.kernel.org/r/20240524112859.2757403-1-aleksander.lobakin@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
