Skip dma setup and mapping for AES driver if plaintext is empty.
Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Sven Auhagen reports transaction failures with following error:
./main.nft:13:1-26: Error: Could not process rule: Cannot allocate memory
percpu: allocation failed, size=16 align=8 atomic=1, atomic alloc failed, no space left
This points to failing pcpu allocation with GFP_ATOMIC flag.
However, transactions happen from user context and are allowed to sleep.
One case where we can call into percpu allocator with GFP_ATOMIC is
nft_counter expression.
Normally this happens from control plane, so this could use GFP_KERNEL
instead. But one use case, element insertion from packet path,
needs to use GFP_ATOMIC allocations (nft_dynset expression).
At this time, .clone callbacks always use GFP_ATOMIC for this reason.
Add gfp_t argument to the .clone function and pass GFP_KERNEL or
GFP_ATOMIC flag depending on context, this allows all clone memory
allocations to sleep for the normal (transaction) case.
Cc: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new test script that uses packetdrill tool to exercise conntrack
state machine.
Needs ip/ip6tables and conntrack tool (to check if we have an entry in
the expected state).
Test cases added here cover following scenarios:
1. already-acked (retransmitted) packets are not tagged as INVALID
2. RST packet coming when conntrack is already closing (FIN/CLOSE_WAIT)
transitions conntrack to CLOSE even if the RST is not an exact match
3. RST packets with out-of-window sequence numbers are marked as INVALID
4. SYN+Challenge ACK: check that challenge ack is allowed to pass
5. Old SYN/ACK: check conntrack handles the case where SYN is answered
with SYN/ACK for an old, previous connection attempt
6. Check SYN reception while in ESTABLISHED state generates a challenge
ack, RST response clears 'outdated' state + next SYN retransmit gets
us into 'SYN_RECV' conntrack state.
Tests get run twice, once with ipv4 and once with ipv6.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The following warning was reported by lee bruce:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 8264 at fs/fuse/dev.c:300
fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300
Modules linked in:
CPU: 0 PID: 8264 Comm: ab2 Not tainted 6.9.0-rc7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
RIP: 0010:fuse_request_end+0x685/0x7e0 fs/fuse/dev.c:300
......
Call Trace:
<TASK>
fuse_dev_do_read.constprop.0+0xd36/0x1dd0 fs/fuse/dev.c:1334
fuse_dev_read+0x166/0x200 fs/fuse/dev.c:1367
call_read_iter include/linux/fs.h:2104 [inline]
new_sync_read fs/read_write.c:395 [inline]
vfs_read+0x85b/0xba0 fs/read_write.c:476
ksys_read+0x12f/0x260 fs/read_write.c:619
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xce/0x260 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
......
</TASK>
The warning is due to the FUSE_NOTIFY_RESEND notify sent by the write()
syscall in the reproducer program and it happens as follows:
(1) calls fuse_dev_read() to read the INIT request
The read succeeds. During the read, bit FR_SENT will be set on the
request.
(2) calls fuse_dev_write() to send an USE_NOTIFY_RESEND notify
The resend notify will resend all processing requests, so the INIT
request is moved from processing list to pending list again.
(3) calls fuse_dev_read() with an invalid output address
fuse_dev_read() will try to copy the same INIT request to the output
address, but it will fail due to the invalid address, so the INIT
request is ended and triggers the warning in fuse_request_end().
Fix it by clearing FR_SENT when re-adding requests into pending list.
Acked-by: Miklos Szeredi <mszeredi@redhat.com>
Reported-by: xingwei lee <xrivendell7@gmail.com>
Reported-by: yue sun <samsun1006219@gmail.com>
Closes: https://lore.kernel.org/linux-fsdevel/58f13e47-4765-fce4-daf4-dffcc5ae2330@huaweicloud.com/T/#m091614e5ea2af403b259e7cea6a49e51b9ee07a7
Fixes: 760eac73f9 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
When fuse_resend() moves the requests from processing lists to pending
list, it uses __set_bit() to set FR_PENDING bit in req->flags.
Using __set_bit() is not safe, because other functions may update
req->flags concurrently (e.g., request_wait_answer() may call
set_bit(FR_INTERRUPTED, &flags)).
Fix it by using set_bit() instead.
Fixes: 760eac73f9 ("fuse: Introduce a new notification type for resend pending requests")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
commit c6f597bc59 ("ASoC: audio-graph-card2: remove unneeded
of_node_get()") removed of_node_get(), but it need to keep original
reference, so of_node_get() itself is needed.
Because of_get_next_child() will call of_node_put() inside, if the
reference count dropped to zero, then of_node_get() after that will be
use afer free. Need to call of_node_get() *before* that.
Fixes: c6f597bc59 ("ASoC: audio-graph-card2: remove unneeded of_node_get()")
Link: https://lore.kernel.org/r/f930862e-9d30-4ea3-b3e7-b4b4f411f6d1@moroto.mountain
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875xvmqzs8.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This set type keeps two copies of the sets' content,
priv->match (live version, used to match from packet path)
priv->clone (work-in-progress version of the 'future' priv->match).
All additions and removals are done on priv->clone. When transaction
completes, priv->clone becomes priv->match and a new clone is allocated
for use by next transaction.
Problem is that the cloning requires GFP_KERNEL allocations but we
cannot fail at either commit or abort time.
This patch defers the clone until we get an insertion or removal
request. This allows us to handle OOM situations correctly.
This also allows to remove ->dirty in a followup change:
If ->clone exists, ->dirty is always true
If ->clone is NULL, ->dirty is always false, no elements were added
or removed (except catchall elements which are external to the specific
set backend).
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The helper uses priv->clone unconditionally which will fail once we do
the clone conditionally on first insert or removal.
'nft get element' from userspace needs to use priv->match since this
runs from rcu read side lock section.
Prepare for this by passing the match backend data as argument.
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In IPv6, ipv6_rcv_core will parse the hop-by-hop type extension header and increase skb->transport_header by one extension header length.
But if there are more other extension headers like fragment header at this time, the skb->transport_header points to the second extension header,
not the transport layer header or the first extension header.
This will result in the start and nexthdrp variable not pointing to the same position in ipv6frag_thdr_trunced,
and ipv6_skip_exthdr returning incorrect offset and frag_off.Sometimes,the length of the last sharded packet is smaller than the calculated incorrect offset, resulting in packet loss.
We can use network header to offset and calculate the correct position to solve this problem.
Fixes: 9d9e937b1c (ipv6/netfilter: Discard first fragment not including all headers)
Signed-off-by: Gao Xingwang <gaoxingwang1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This isn't modified at runtime. Mark it const so it can move to
read-only data.
Cc: dann frazier <dann.frazier@canonical.com>
Cc: Hanjun Guo <hanjun.guo@linaro.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240502233447.420888-1-swboyd@chromium.org
The Renesas OS Timer (OSTM) driver contains two probe points, of which
only one should complete:
1. Early probe, using TIMER_OF_DECLARE(), to provide the sole
clocksource on (arm32) RZ/A1 and RZ/A2 SoCs,
2. Normal probe, using a platform driver, to provide additional timers
on (arm64 + riscv) RZ/G2L and similar SoCs.
The latter is needed because using OSTM on RZ/G2L requires manipulation
of its reset signal, which is not yet available at the time of early
probe, causing early probe to fail with -EPROBE_DEFER. It is only
enabled when building a kernel with support for the RZ/G2L family, so it
does not impact RZ/A1 and RZ/A2. Hence only one probe method can
complete on all affected systems.
As relying on the order of initialization of subsystems inside the
kernel is fragile, set the DT node's OF_POPULATED flag after a succesful
early probe. This makes sure the platform driver's probe is never
called after a successful early probe.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviwed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/bd027379713cbaafa21ffe9e848ebb7f475ca0e7.1710930542.git.geert+renesas@glider.be
The RZ/V2H(P) (R9A09G057) SoC is equipped with the Generic Timer Module,
also known as OSTM. Similar to the RZ/G2L SoC, the OSTM on the RZ/V2H(P)
SoC requires the reset line to be deasserted before accessing any
registers.
Early call to ostm_init() happens through TIMER_OF_DECLARE() which always
fails with -EPROBE_DEFER, as resets are not available that early in the
boot process. To address this issue on the RZ/V2H(P) SoC, enable the OSTM
driver to be reprobed through the platform driver probe mechanism.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240322151219.885832-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Document the General Timer Module (a.k.a OSTM) block on Renesas RZ/V2H(P)
("R9A09G057") SoC, which is identical to the one found on the RZ/A1H and
RZ/G2L SoCs. Add the "renesas,r9a09g057-ostm" compatible string for the
RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20240322151219.885832-2-prabhakar.mahadev-lad.rj@bp.renesas.com
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmY39LkeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiGaB8H+wWcwT1O7K2SQx1a
sHDYJSXfbjgShS7Wt+gbDNvhGJqG/5FkpHyBmBKUdElZs8QMf21GAbIfJvzcNThA
g+FakIMjfhNH/dr6TJXHWbb2NZV67exDbbuaQDyMhNhIZqil4BH/OEPbLYIdquvm
/HDGFB/whVoHVC+Ug8esEOL3Uy+rizBDlsT/K4ZgpOC3TuUmlRpptSVACwjcCGXM
PFKyyTIr0ZnKcz3+4yTEtpDFm6e/ujxMwM66GBCgmPaZ3lJp5ruY3kGpBTmSyoqV
Rh3CQlIhBo8gwlAx/yQXfxEZomhxT6DfRpc6s/1W0J1UZN/j2pYy056OYyckG32c
uQ9ujxQ=
=M0wP
-----END PGP SIGNATURE-----
Merge 6.9-rc7 into usb-next
We want the USB fixes in here as well, and resolve a merge conflict in
drivers/usb/dwc3/core.c
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Disable HDCP Line Rekeying when HDCP ver > 1.4 and when we are
on HDMI TMDS operation for DISPLAY_VER >= 14.
--v2
-Wa to be mentioned in comments not in commit message [Jani]
-Remove blankline [Jani]
--v3
-No need to write what is being done in comments when code
is self explanatory [Jani]
--v4
-Add comment regarding need of this WA when in TMDS mode
[Chaitanya]
-Write in chicken register for MTL [CHaitanya]
--v5
-Fix comment [Chaitanya]
-Use correct set and clear value in intel_de_rmw [Chaitanya]
--v6
-No need to define C, D chicken bits it gets calculated [Animesh]
Bspec: 49273
Bspec: 69964
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240507062243.1076047-2-suraj.kandpal@intel.com
Thanks to the somewhat asymmetrical nature, while removing
iommu_setup_dma_ops() from the arch_setup_dma_ops() flow, I managed to
forget that arm64's teardown path was also specific to iommu-dma. Clean
that up to match, otherwise probe deferral will lead to the arch code
erroneously removing DMA ops set elsewhere.
Reported-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/linux-iommu/Zi_LV28TR-P-PzXi@eriador.lumag.spb.ru/
Fixes: b67483b3c4 ("iommu/dma: Centralise iommu_setup_dma_ops()")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Acked-by: Will Deacon <will@kernel.org>
Tested-by: Nicolin Chen <nicolinc@nvidia.com>
Link: https://lore.kernel.org/r/d4cc20cbb0c45175e98dd76bf187e2ad6421296d.1714472573.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Fix the fileserver rotation code in a couple of ways:
(1) op->server_states is an array, not a pointer to a single record, so
fix the places that access it to index it.
(2) In the places that go through an address list to work out which one
has the best priority, fix the loops to skip known failed addresses.
Without this, the rotation algorithm may get stuck on addresses that are
inaccessible or don't respond.
This can be triggered manually by finding a server that advertises a
non-routable address and giving it a higher priority, eg.:
echo "add udp 192.168.0.0/16 3000" >/proc/fs/afs/addr_prefs
if the server, say, includes the address 192.168.7.7 in its address list,
and then attempting to access a volume on that server.
Fixes: 495f2ae9e3 ("afs: Fix fileserver rotation")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: linux-afs@lists.infradead.org
Link: https://lore.kernel.org/r/4005300.1712309731@warthog.procyon.org.uk/ # v1
Link: https://lore.kernel.org/r/998836.1714746152@warthog.procyon.org.uk
Signed-off-by: Christian Brauner <brauner@kernel.org>
Append the additional parameters passed/set in the dedicated parameter
area (RTAS_FADUMP_PARAM_AREA) to bootargs in fadump capture kernel.
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509115755.519982-4-hbathini@linux.ibm.com
For fadump case, passing additional parameters to dump capture kernel
helps in minimizing the memory footprint for it and also provides the
flexibility to disable components/modules, like hugepages, that are
hindering the boot process of the special dump capture environment.
Set up a dedicated parameter area to be passed to the capture kernel.
This area type is defined as RTAS_FADUMP_PARAM_AREA. Sysfs attribute
'/sys/kernel/fadump/bootargs_append' is exported to the userspace to
specify the additional parameters to be passed to the capture kernel
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509115755.519982-3-hbathini@linux.ibm.com
Currently, fadump on pseries assumes a single boot memory region even
though f/w supports more than one boot memory region. Add support for
more boot memory regions to make the implementation flexible for any
enhancements that introduce other region types. For this, rtas memory
structure for fadump is updated to have multiple boot memory regions
instead of just one. Additionally, methods responsible for creating
the fadump memory structure during both the first and second kernel
boot have been modified to take these multiple boot memory regions
into account. Also, a new callback has been added to the fadump_ops
structure to get the maximum boot memory regions supported by the
platform.
Signed-off-by: Sourabh Jain <sourabhjain@linux.ibm.com>
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240509115755.519982-2-hbathini@linux.ibm.com
Often userspace needs to know whether two file descriptors refer to the
same struct file. For example, systemd uses this to filter out duplicate
file descriptors in it's file descriptor store (cf. [1]) and vulkan uses
it to compare dma-buf fds (cf. [2]).
The only api we provided for this was kcmp() but that's not generally
available or might be disallowed because it is way more powerful (allows
ordering of file pointers, operates on non-current task) etc. So give
userspace a simple way of comparing two file descriptors for sameness
adding a new fcntl() F_DUDFD_QUERY.
Link: a4f0e0da35/src/basic/fd-util.c (L517) [1]
Link: https://gitlab.freedesktop.org/wlroots/wlroots/-/blob/master/render/vulkan/texture.c#L490 [2]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
[brauner: commit message]
Signed-off-by: Christian Brauner <brauner@kernel.org>
enumeration_complete will be completed when a peripheral is attached.
And initialization_complete will be completed when a peripheral is
initialized. rt715_dev_resume() should wait for initialization_complete
instead of enumeration_complete.
the issue exists since commit 20d17057f0 ("ASoC: rt715-sdca: Add RT715
sdca vendor-specific driver"), but the commit can only apply to
commit f892e66fca ("ASoC: rt-sdw*: add __func__ to all error logs").
Fixes: f892e66fca ("ASoC: rt-sdw*: add __func__ to all error logs")
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163658.68062-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
get_codec_name_and_route() get dai name from the first codec dai in a dai
link. However, the dai may not always be the first codec dai. Use the
dai parameter to make sure get_codec_name_and_route() refers to the
correct dai.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-19-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
A generic .rtd_init() callback could be used by different dais. It is
useful to pass dai parameter to the callback. The dai parameter will be
used in the follow up commit. No functional change here.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-18-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
sof_sdw_rtd_init() will add the controls and widgets if we set them in
the codec_info. Move the additions from .rtd_init callback to
sof_sdw_rtd_init().
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-17-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, we add card controls and dapm widgets one by one in the
codec_info->dais->rtd_init callback. Duplicated controls and dapm
widgets will be added if there are more than one types of amps in the
dai link. Moving it to sof_sdw_rtd_init() and only add the
controls/widgets of the first codec dai can avoid the duplications.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-16-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some controls and widgets have exactly the same items. Rename them to be
generic. This is a preparation for further cleanup. No function change.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-15-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
To be consistent to other amps that used in the machine driver.
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-14-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Since there is dai link helper max_98373_dai_link, we could change all
functions and data of max98373 to static.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add dapm routes of max98373 to sdw driver and remove dependency of
maxim-common module.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-12-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_98373_dai_link() function to initialize dai link of maxim
max98373 speaker amplifier. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-11-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_98373_dai_link() function to initialize dai link of maxim
max98373 speaker amplifier. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-10-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Use max_98373_dai_link() function to initialize dai link of maxim
max98373 speaker amplifier. No functional change.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add a helper function, max_98373_dai_link(), for machine driver to
initialize dai link of maxim max98373 speaker amplifier.
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Brent Lu <brent.lu@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20240509163418.67746-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
