We can't call __wait_on_freeing_inode() with btree locks held; we're
waiting on another thread that's in evict(), and before it clears that
bit it needs to write that inode to flush timestamps - deadlock.
Fixing this involves a fair amount of re-jiggering to plumb a new
transaction restart.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
the standard vfs inode hash table suffers from painful lock contention -
this is long overdue
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bcachefs is switching to an rhashtable for vfs inodes instead of the
standard inode.c hashtable, so we need this exported, or - a static
inline makes more sense for a single atomic_inc().
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Bcachefs often uses this function to divide by nanosecond times - which
can easily cause problems when cast to u32. For example, `cat
/sys/fs/bcachefs/*/internal/rebalance_status` would return invalid data
in the `duration waited` field because dividing by the number of
nanoseconds in a minute requires the divisor parameter to be u64.
Signed-off-by: Reed Riley <reed@riley.engineer>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
cat /sys/fs/bcachefs/*/internal/rebalance_status
waiting
io wait duration: 13.5 GiB
io wait remaining: 627 MiB
duration waited: 1392 m
duration waited was increasing at a rate of about 14 times the expected
rate.
div_u64 takes a u32 divisor, but u->nsecs (from time_units[]) can be
bigger than u32.
Signed-off-by: Feiko Nanninga <feiko.nanninga@fnanninga.de>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
This fixes two problems in the handling of negative times:
• rem is signed, but the rem * c->sb.nsec_per_time_unit operation
produced a bogus unsigned result, because s32 * u32 = u32.
• The timespec was not normalized (it could contain more than a
billion nanoseconds).
For example, { .tv_sec = -14245441, .tv_nsec = 750000000 }, after
being round tripped through timespec_to_bch2_time and then
bch2_time_to_timespec would come back as
{ .tv_sec = -14245440, .tv_nsec = 4044967296 } (more than 4 billion
nanoseconds).
Cc: stable@vger.kernel.org
Fixes: 595c1e9bab ("bcachefs: Fix time handling")
Closes: https://github.com/koverstreet/bcachefs/issues/743
Co-developed-by: Erin Shepherd <erin.shepherd@e43.eu>
Signed-off-by: Erin Shepherd <erin.shepherd@e43.eu>
Co-developed-by: Ryan Lahfa <ryan@lahfa.xyz>
Signed-off-by: Ryan Lahfa <ryan@lahfa.xyz>
Signed-off-by: Alyssa Ross <hi@alyssa.is>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
bch2_bkey_drop_ptrs() had a some complicated machinery for avoiding
O(n^2) when dropping multiple pointers - but when n is only going to be
~4, it's not worth it.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Without this, we'd potentially sort multiple times without a
cond_resched(), leading to hung task warnings on larger systems.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
ca->io_ref does not protect against the filesystem going way,
c->write_ref does. Much like
0b50b7313e bcachefs: Fix refcounting in discard path
the other async paths need fixing.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Clang warns (or errors with CONFIG_WERROR):
net/xfrm/xfrm_policy.c:1286:8: error: variable 'dir' is uninitialized when used here [-Werror,-Wuninitialized]
1286 | if ((dir & XFRM_POLICY_MASK) == XFRM_POLICY_OUT) {
| ^~~
net/xfrm/xfrm_policy.c:1257:9: note: initialize the variable 'dir' to silence this warning
1257 | int dir;
| ^
| = 0
1 error generated.
A recent refactoring removed some assignments to dir because
xfrm_policy_is_dead_or_sk() has a dir assignment in it. However, dir is
used elsewhere in xfrm_hash_rebuild(), including within loops where it
needs to be reloaded for each policy. Restore the assignments before the
first use of dir to fix the warning and ensure dir is properly
initialized throughout the function.
Fixes: 08c2182cf0 ("xfrm: policy: use recently added helper in more places")
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
Ido Schimmel says:
====================
Unmask upper DSCP bits - part 4 (last)
tl;dr - This patchset finishes to unmask the upper DSCP bits in the IPv4
flow key in preparation for allowing IPv4 FIB rules to match on DSCP. No
functional changes are expected.
The TOS field in the IPv4 flow key ('flowi4_tos') is used during FIB
lookup to match against the TOS selector in FIB rules and routes.
It is currently impossible for user space to configure FIB rules that
match on the DSCP value as the upper DSCP bits are either masked in the
various call sites that initialize the IPv4 flow key or along the path
to the FIB core.
In preparation for adding a DSCP selector to IPv4 and IPv6 FIB rules, we
need to make sure the entire DSCP value is present in the IPv4 flow key.
This patchset finishes to unmask the upper DSCP bits by adjusting all
the callers of ip_route_output_key() to properly initialize the full
DSCP value in the IPv4 flow key.
No functional changes are expected as commit 1fa3314c14 ("ipv4:
Centralize TOS matching") moved the masking of the upper DSCP bits to
the core where 'flowi4_tos' is matched against the TOS selector.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_key() so that in
the future it could perform the FIB lookup according to the full DSCP
value.
Note that the 'tos' variable holds the full DS field.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_key() so that in
the future it could perform the FIB lookup according to the full DSCP
value.
Note that callers of udp_tunnel_dst_lookup() pass the entire DS field in
the 'tos' argument.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_key() so that in
the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling nf_route() which eventually
calls ip_route_output_key() so that in the future it could perform the
FIB lookup according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_key() so that in
the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when initializing an IPv4 flow key via
ip_tunnel_init_flow() before passing it to ip_route_output_key() so that
in the future we could perform the FIB lookup according to the full DSCP
value.
Note that the 'tos' variable includes the full DS field. Either the one
specified as part of the tunnel parameters or the one inherited from the
inner packet.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when initializing an IPv4 flow key via
ip_tunnel_init_flow() before passing it to ip_route_output_key() so that
in the future we could perform the FIB lookup according to the full DSCP
value.
Note that the 'tos' variable includes the full DS field. Either the one
specified via the tunnel key or the one inherited from the inner packet.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when initializing an IPv4 flow key via
ip_tunnel_init_flow() before passing it to ip_route_output_key() so that
in the future we could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_key() so that in
the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_key() so that in
the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask the upper DSCP bits when calling ip_route_output_gre() so that in
the future it could perform the FIB lookup according to the full DSCP
value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Unmask upper DSCP bits when calling ip_route_output() so that in the
future it could perform the FIB lookup according to the full DSCP value.
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The rtw89 is continuously adjusting code to support MLO. The major changes
are listed below:
rtw88:
* fix USB not transmitting beacon in AP mode
rtw89:
* complete BT-coexistence code for RTL8852BT
* fix throughput degrade of VHT rate for RTL8851B/8852A/8852B/8852BT
* enable WoWLAN net-detect for more one chip, RTL8922A
-----BEGIN PGP SIGNATURE-----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=G2FN
-----END PGP SIGNATURE-----
Merge tag 'rtw-next-2024-09-05' of https://github.com/pkshih/rtw
rtw-next patches for v6.12
The rtw89 is continuously adjusting code to support MLO. The major changes
are listed below:
rtw88:
* fix USB not transmitting beacon in AP mode
rtw89:
* complete BT-coexistence code for RTL8852BT
* fix throughput degrade of VHT rate for RTL8851B/8852A/8852B/8852BT
* enable WoWLAN net-detect for more one chip, RTL8922A
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240904074637.1352864-1-nichen@iscas.ac.cn
Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() +
clk_prepare_enable(), which can make the clk consistent with the device
life cycle and reduce the risk of unreleased clk resources. Since the
device framework has automatically released the clk resource, there is
no need to execute clk_disable_unprepare(clk) on the error path.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240903110205.4127706-3-lizetao1@huawei.com
Use devm_clk_get_optional_enabled() instead of devm_clk_get_optional() +
clk_prepare_enable(), which can make the clk consistent with the device
life cycle and reduce the risk of unreleased clk resources. Since the
device framework has automatically released the clk resource, there is
no need to execute clk_disable_unprepare(clk) on the error path, drop
the clk_disable_unprepare label, and the original error process can change
to dispose_irq.
Signed-off-by: Li Zetao <lizetao1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/20240903110205.4127706-2-lizetao1@huawei.com
In the `wilc_parse_join_bss_param` function, the TSF field of the `ies`
structure is accessed after the RCU read-side critical section is
unlocked. According to RCU usage rules, this is illegal. Reusing this
pointer can lead to unpredictable behavior, including accessing memory
that has been updated or causing use-after-free issues.
This possible bug was identified using a static analysis tool developed
by myself, specifically designed to detect RCU-related issues.
To address this, the TSF value is now stored in a local variable
`ies_tsf` before the RCU lock is released. The `param->tsf_lo` field is
then assigned using this local variable, ensuring that the TSF value is
safely accessed.
Fixes: 205c50306a ("wifi: wilc1000: fix RCU usage in connect path")
Signed-off-by: Jiawei Ye <jiawei.ye@foxmail.com>
Reviewed-by: Alexis Lothoré <alexis.lothore@bootlin.com>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/tencent_466225AA599BA49627FB26F707EE17BC5407@qq.com
Replace one-element array with a flexible-array member in
`struct host_cmd_ds_802_11_scan_ext`.
With this, fix the following warning:
elo 16 17:51:58 surfacebook kernel: ------------[ cut here ]------------
elo 16 17:51:58 surfacebook kernel: memcpy: detected field-spanning write (size 243) of single field "ext_scan->tlv_buffer" at drivers/net/wireless/marvell/mwifiex/scan.c:2239 (size 1)
elo 16 17:51:58 surfacebook kernel: WARNING: CPU: 0 PID: 498 at drivers/net/wireless/marvell/mwifiex/scan.c:2239 mwifiex_cmd_802_11_scan_ext+0x83/0x90 [mwifiex]
Reported-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Closes: https://lore.kernel.org/linux-hardening/ZsZNgfnEwOcPdCly@black.fi.intel.com/
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Brian Norris <briannorris@chromium.org>
Signed-off-by: Kalle Valo <kvalo@kernel.org>
Link: https://patch.msgid.link/ZsZa5xRcsLq9D+RX@elsanto
In spi_geni_remove(), the free_irq() sequence is different from that
on the probe error path. And the IRQ will still remain and it's interrupt
handler may use the dma channel after release dma channel and before free
irq, which is not secure, fix it.
Fixes: b59c122484 ("spi: spi-geni-qcom: Add support for GPI dma")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-3-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It's important to undo pm_runtime_use_autosuspend() with
pm_runtime_dont_use_autosuspend() at driver exit time unless driver
initially enabled pm_runtime with devm_pm_runtime_enable()
(which handles it for you).
Hence, switch to devm_pm_runtime_enable() to fix it, so the
pm_runtime_disable() in probe error path and remove function
can be removed.
Fixes: cfdab2cd85 ("spi: spi-geni-qcom: Set an autosuspend delay of 250 ms")
Signed-off-by: Jinjie Ruan <ruanjinjie@huawei.com>
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patch.msgid.link/20240909073141.951494-2-ruanjinjie@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The mt8365_i2s_enum and mt8365_i2s_hd_str variables are not
used anywhere, but cause a warning when building with C=1
or when enabling -Wunused-const-variable:
sound/soc/mediatek/mt8365/mt8365-dai-i2s.c:781:27: error: 'mt8365_i2s_hd_str' defined but not used [-Werror=unused-const-variable=]
781 | static const char * const mt8365_i2s_hd_str[] = {
| ^~~~~~~~~~~~~~~~~
Remove these for the moment, they can be added back if a
user comes up.
Fixes: 402bbb13a1 ("ASoC: mediatek: mt8365: Add I2S DAI support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240907200053.3027553-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
On x86, the header is not already included implicitly,
breaking compile-testing:
In file included from sound/soc/mediatek/mt8365/mt8365-afe-common.h:19,
from sound/soc/mediatek/mt8365/mt8365-afe-pcm.c:18:
sound/soc/mediatek/mt8365/mt8365-afe-pcm.c: In function 'mt8365_afe_cm2_mux_conn':
sound/soc/mediatek/mt8365/mt8365-reg.h:952:41: error: implicit declaration of function 'FIELD_PREP' [-Wimplicit-function-declaration]
952 | #define CM2_AFE_CM2_CONN_CFG1(x) FIELD_PREP(CM2_AFE_CM2_CONN_CFG1_MASK, (x))
| ^~~~~~~~~~
Included it ahead of the field definitions.
Fixes: 38c7c9ddc7 ("ASoC: mediatek: mt8365: Add common header")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://patch.msgid.link/20240908221754.2210857-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
The TLV320DAC3100 Audio DAC has 25 built-in digital audio processing blocks
(PRBs). Each of these PRBs has a static filter structure with programmable
coefficients. Once a PRB is selected for use by the DAC, its filter
coefficients can be configured via a dedicated set of registers.
Define a new optional firmware which can be loaded by the TLV320DAC driver.
This firmware describes a full set of filter coefficients for all blocks
used by the various PRBs.
The firmware's binary format is heavily inspired by the one used in the
peb2466 driver. It includes a version marker to allow for potential
evolutions of the format.
Note that adaptive filtering is not supported i.e. filter coefficients are
loaded once before power-on and then cannot be changed while the DAC is
powered. This is why only page A coefficients are modified. Page B
coefficients are only used for adaptive filtering.
Signed-off-by: Romain Gantois <romain.gantois@bootlin.com>
Link: https://patch.msgid.link/20240906-tlv320-filter-v1-1-6955f53ff435@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
fix to save the dsp bin file name into the correct array, coef_binaryname,
instead of rca_binaryname, in case name_prefix is not NULL.
Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Link: https://patch.msgid.link/20240907001540.944-1-shenghao-ding@ti.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The tee_shm_get_va() function never returns NULL, it returns error
pointers. Update the check to match.
Fixes: f0c8431568 ("optee: probe RPMB device using RPMB subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Jens Wiklander <jens.wiklander@linaro.org>
Link: https://lore.kernel.org/r/f8c12aed-b5d1-4522-bf95-622b8569706d@stanley.mountain
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Until VM_DONTEXPAND was added in commit 1c1914d6e8 ("dma-buf: heaps:
Don't track CMA dma-buf pages under RssFile") it was possible to obtain
a mapping larger than the buffer size via mremap and bypass the overflow
check in dma_buf_mmap_internal. When using such a mapping to attempt to
fault past the end of the buffer, the CMA heap fault handler also checks
the fault offset against the buffer size, but gets the boundary wrong by
1. Fix the boundary check so that we don't read off the end of the pages
array and insert an arbitrary page in the mapping.
Reported-by: Xingyu Jin <xingyuj@google.com>
Fixes: a5d2d29e24 ("dma-buf: heaps: Move heap-helper logic into the cma_heap implementation")
Cc: stable@vger.kernel.org # Applicable >= 5.10. Needs adjustments only for 5.10.
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Acked-by: John Stultz <jstultz@google.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240830192627.2546033-1-tjmercier@google.com
Store the cookie to detect concurrent seeks on directories in
file->private_data.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-11-6d3e4816aa7b@kernel.org
Acked-by: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
This is similar to generic_file_llseek() but allows the caller to
specify a cookie that will be updated to indicate that a seek happened.
Caller's requiring that information in their readdir implementations can
use that.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-8-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Make generic_file_llseek_size() use must_set_pos(). We'll use
must_set_pos() in another helper in a minutes. Remove __maybe_unused
from must_set_pos() now that it's used.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-7-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Add a new must_set_pos() helper. We will use it in follow-up patches.
Temporarily mark it as unused. This is only done to keep the diff small
and reviewable.
Link: https://lore.kernel.org/r/20240830-vfs-file-f_version-v1-6-6d3e4816aa7b@kernel.org
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
