Introduce wifi LED switch control, add flow to Control a wifi
gpio pin based on the status of WIFI radio, if the pin is connected
to an LED, the LED will indicate the status of the WiFi radio.
Signed-off-by: Hao Zhang <hao.zhang@mediatek.com>
Co-developed-by: Quan Zhou <quan.zhou@mediatek.com>
Signed-off-by: Quan Zhou <quan.zhou@mediatek.com>
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The firmware support for management frame protection has limitations:
- do not support cipher BIP-GMAC-128 and BIP-GMAC-256
- support cipher BIP-CMAC-128 and BIP-CMAC-256, except action frame with
action type 'not robust'.
Therefore, to simplify the logic, do not set the IGTK to firmware and
let the encryption of management frames be handled by upper layer.
Signed-off-by: Michael-CY Lee <michael-cy.lee@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The implementation amounts to setting the driver flag
IEEE80211_VIF_SUPPORTS_CQM_RSSI, and then providing
mechanisms for continuously updating enough information
to be able to provide notifications to userspace when
RSSI drops below a certain threshold
Signed-off-by: Rong Yan <rong.yan@mediatek.com>
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This is expected by the firmware of older chipsets as well, though it may
not have been as strongly required as on mt799x
Fixes: 098428c400 ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Check if background radar is enabled or not before manually triggering it,
and also add more checks in radar detected event.
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For mt7992 chipsets, critical packet mode should be properly configured
to let the HW SDO module correctly fill the AC queue in TX descriptors of
some higher priority packets such as ARP and ICMP.
Without this patch, HW queues may hang when running MU traffic.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Without this commit, reading chip temperature will cause memory leakage.
Fixes: 6879b2e941 ("wifi: mt76: mt7996: add thermal sensor device support")
Reported-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not add UNI_BSS_INFO_11V_MBSSID tag when bssid_indicator is not set
to avoid abnormal beaconing behavior in non-11v MBSS scenario.
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
For mt7996 chipsets, the HW CSO module can help to identify TCP traffic,
which assists the firmware in adjusting algorithms to improve overall
performance.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set RCPI values in mt7996_mcu_sta_rate_ctrl_tlv(), which can make the
FW rate control algorithm be initialized with a better MCS selection
table.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set peer address and aid for the BMC wtbl of station interface. For some
functions such as parsing MU_EDCA parameters from beacon, firmware will
need the peer address to do correct parsing.
Without this patch, MU uplink traffic would get suffered.
Reported-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When a BMC wtbl of station interface is correctly set with peer address,
HW will do rx header translation for broadcast data packets, which makes
mac80211 unable to find the corresponding ieee80211_sta and drop the
packets. To fix this, disable HW rx header translation for BMC entry.
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
of_gpio.h is deprecated and subject to remove.
The driver doesn't use it, simply remove the unused header.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Looks like this was missed in the initial patch that made
the conversion to the emulated chanctx drivers.
Fixes: 0a44dfc070 ("wifi: mac80211: simplify non-chanctx drivers")
Tested-by: James Courtier-Dutton <james.dutton@gmail.com>
Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Even if it is not a real issue at the moment since concurrent access to
mcu message queue is protected by mcu mutex, make the code more robust
and move mcu queue free space check inside queue spinlock critical section.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set intr1 to 0 in mt7996_irq_tasklet() in order to avoid possible
uninitialized variable usage if wed is not active for hif2.
Fixes: 83eafc9251 ("wifi: mt76: mt7996: add wed tx support")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Before sending suspend & wow command to FW, its length should be
4-bytes alignd.
Fixes: c948b5da6b ("wifi: mt76: mt7925: add Mediatek Wi-Fi7 driver for mt7925 chips")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
During chip recovery (e.g. chip reset), there is a possible situation that
kernel worker reset_work is holding the lock and waiting for kernel thread
stat_worker to be parked, while stat_worker is waiting for the release of
the same lock.
It causes a deadlock resulting in the dumping of hung tasks messages and
possible rebooting of the device.
This patch prevents the execution of stat_worker during the chip recovery.
Signed-off-by: Leon Yen <leon.yen@mediatek.com>
Signed-off-by: Ming Yen Hsieh <MingYen.Hsieh@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
mt7920e is a mt7921 series chipset with 802.11ax 2x2:2SS support.
The major difference is in firmware side only, at this moment.
This patch would add some mandatory changes for new chip id and
firmware download control.
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Fixes issues with scanning and low power output at some rates.
Fixes: f75e4779d2 ("wifi: mt76: mt7996: add txpower setting support")
Signed-off-by: Chad Monroe <chad@monroe.io>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The wcid can be NULL. It should be checked for validity before
dereferencing it to avoid crash.
Fixes: 098428c400 ("wifi: mt76: connac: set correct muar_idx for mt799x chipsets")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
This flag is needed for the PSE client reset. Fixes watchdog reset issues.
Fixes: c677dda165 ("wifi: mt76: mt7603: improve watchdog reset reliablity")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Use the correct WMM AC queue instead of the MGMT one to fix potential issues
with aggregation sequence number tracking. Drop non-bufferable packets.
Fixes: fca9615f1a ("mt76: mt7603: fix up hardware queue index for PS filtered packets")
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When pre-calibration data is missing, do not fail the driver probe.
Instead, just print a warning and fall back to regular calibration.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add pre-calibration for mt7986 and mt7916. It has different data size
with mt7915. Group cal needs 54k and 94k for 2G + 5G and 2G + 6G,
respectively. DPD cal needs 300k.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: StanleyYP Wang <StanleyYP.Wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Send an update to the MCU whenever the settings change
Signed-off-by: MeiChia Chiu <MeiChia.Chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Set correct beamformer capabilities for station vif in HE PHY
capabilities IE.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Do not report measurements if the airtime counter was cleared since the
last update (possibly by firmware)
Signed-off-by: Henry Yen <henry.yen@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The mcu command format are different for mt7915 and mt7986.
Fix the mt7915_mcu_wed_wa_tx_stats to support mt7915 and mt7986.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
When queueing packets, only the MT76_RESET flag of the primary PHY
is checked. If the primary PHY is scanning or changing channels, this can
lead to packet loss for tx on the second PHY.
Fix this by passing the phy to the .tx_queue_skb op and using it to check
the correct flag.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Merge AMD P-state driver changes from Perry Yuan for v6.10:
"- Enable CPPC v2 for certain processors in the family 17H, as requested
by TR40 processor users who expect improved performance and lower
system temperature.
- Change latency and delay values to be read from platform firmware
firstly for more accurate timing.
- A new quirk is introduced for supporting amd-pstate on legacy
processors which either lack CPPC capability, or only only have CPPC
v2 capability."
* amd-pstate:
MAINTAINERS: cpufreq: amd-pstate: Add co-maintainers and reviewer
cpufreq: amd-pstate: remove unused variable lowest_nonlinear_freq
cpufreq: amd-pstate: fix code format problems
cpufreq: amd-pstate: Add quirk for the pstate CPPC capabilities missing
cppc_acpi: print error message if CPPC is unsupported
cpufreq: amd-pstate: get transition delay and latency value from ACPI tables
cpufreq: amd-pstate: Bail out if min/max/nominal_freq is 0
cpufreq: amd-pstate: Remove amd_get_{min,max,nominal,lowest_nonlinear}_freq()
cpufreq: amd-pstate: Unify computation of {max,min,nominal,lowest_nonlinear}_freq
cpufreq: amd-pstate: Document the units for freq variables in amd_cpudata
cpufreq: amd-pstate: Document *_limit_* fields in struct amd_cpudata
dereference in the lmh driver in case the SCM is not present (Konrad
Dybcio)
- Use the strreplace() function instead of doing it manually in the
Armada driver (Rasmus Villemoes)
- Convert st,stih407-thermal to DT schema and fix up missing
properties (Raphael Gallais-Pou)
- Add suspend/resume by restoring the context of the tsens sensor
(Priyansh Jain)
- Support A1 SoC family Thermal Sensor controller and add the DT
bindings (Dmitry Rokosov)
- Improve the temperature approximation calculation and consolidate
the Tj constant into a shared area of the structure instead of
duplicating it on the Rcar Gen3 (Niklas Söderlund)
- Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to support
it correctly (Hsin-Te Yuan)
- Fix a null pointer dereference on the tsens driver when the function
compute_intercept_slope() is called with a null parameter (Aleksandr
Mishin)
- Remove some unused fields in struct qpnp_tm_chip and k3_bandgap
(Christophe Jaillet)
- Fixup calibration efuse data decoding, consolidate the code by
checking boundaries and refactor some part of the LVTS Mediatek
driver. After setting the scene, add MT8186 and MT8188 along with
the DT bindings (Nicolas Pitre)
- Add Loongson-2K2000 support after some minor code adjustements and
providing the DT bindings definition (Binbin Zhou)
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmYzYJQACgkQqDIjiipP
6E+siAgAjU4QO9x+akio7f2WeDbCUe5mCmVEcVxeoVumRw119I1PThRqN0fiZ2H9
qjSy8/dDuXMYRMK2NBE51wPq8I7bD3SDUiPSqaL6eNyKJYMSr6ZcuJgBWNEYgwSv
laeldN4h83+DGfp+UcZWfEEr8tnGv5SGCQ5htGFB3QOiQLBaUqdkObzrGvROeT92
pZMX18+ryKr/5k/e9DkOPwPObcfLkzb8w1m8UOZeRwjt+fyFKdZbdp9s7GTtPiZc
ULrhCwigYPWLD4GhS6My3V80eZyNNtO/UuEojKQyOpY/gKifHtKQViGv7DhPbDQA
3goodE7tTiQjeEYPg7Dx2p/twsBAPA==
=nDt+
-----END PGP SIGNATURE-----
Merge tag 'thermal-v6.10-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux into thermal
Merge updates of thermal drivers for v6.10 from Daniel Lezcano:
"- Add QCM2290 compatible DT bindings for Lmh and fix a null pointer
dereference in the lmh driver in case the SCM is not present (Konrad
Dybcio)
- Use the strreplace() function instead of doing it manually in the
Armada driver (Rasmus Villemoes)
- Convert st,stih407-thermal to DT schema and fix up missing
properties (Raphael Gallais-Pou)
- Add suspend/resume by restoring the context of the tsens sensor
(Priyansh Jain)
- Support A1 SoC family Thermal Sensor controller and add the DT
bindings (Dmitry Rokosov)
- Improve the temperature approximation calculation and consolidate
the Tj constant into a shared area of the structure instead of
duplicating it on the Rcar Gen3 (Niklas Söderlund)
- Fix the Mediatek LVTS sensor coefficient for the MT8192 in order to support
it correctly (Hsin-Te Yuan)
- Fix a null pointer dereference on the tsens driver when the function
compute_intercept_slope() is called with a null parameter (Aleksandr
Mishin)
- Remove some unused fields in struct qpnp_tm_chip and k3_bandgap
(Christophe Jaillet)
- Fixup calibration efuse data decoding, consolidate the code by
checking boundaries and refactor some part of the LVTS Mediatek
driver. After setting the scene, add MT8186 and MT8188 along with
the DT bindings (Nicolas Pitre)
- Add Loongson-2K2000 support after some minor code adjustements and
providing the DT bindings definition (Binbin Zhou)"
* tag 'thermal-v6.10-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (28 commits)
thermal/drivers/loongson2: Add Loongson-2K2000 support
dt-bindings: thermal: loongson,ls2k-thermal: Fix incorrect compatible definition
dt-bindings: thermal: loongson,ls2k-thermal: Add Loongson-2K0500 compatible
thermal/drivers/loongson2: Trivial code style adjustment
thermal/drivers/mediatek/lvts_thermal: Add MT8188 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8188
thermal/drivers/mediatek/lvts_thermal: Allow early empty sensor slots
thermal/drivers/mediatek/lvts_thermal: Provision for gt variable location
thermal/drivers/mediatek/lvts_thermal: Add MT8186 support
dt-bindings: thermal: mediatek: Add LVTS thermal controller definition for MT8186
thermal/drivers/mediatek/lvts_thermal: Guard against efuse data buffer overflow
thermal/drivers/mediatek/lvts_thermal: Use offsets for every calibration byte
thermal/drivers/mediatek/lvts_thermal: Remove .hw_tshut_temp
thermal/drivers/mediatek/lvts_thermal: Move comment
thermal/drivers/mediatek/lvts_thermal: Retrieve all calibration bytes
thermal/drivers/k3_bandgap: Remove some unused fields in struct k3_bandgap
thermal/drivers/qcom: Remove some unused fields in struct qpnp_tm_chip
thermal/drivers/tsens: Fix null pointer dereference
thermal/drivers/mediatek/lvts_thermal: Add coeff for mt8192
thermal/drivers/rcar_gen3: Update temperature approximation calculation
...
Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the PCI device.
Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240412161057.14099-31-Jonathan.Cameron@huawei.com
To allow for assigning a suitable parent to the struct pmu device
update the documentation to describe the device via the event_source
bus where it will remain accessible.
For the ABI documention file also rename the file as it is named
after the path.
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240412161057.14099-30-Jonathan.Cameron@huawei.com
Modify the code so it can be compiled tested in configurations that do
not have ACPI enabled.
It fixes the following errors:
drivers/media/pci/intel/ipu-bridge.c:103:30: error: implicit declaration of function ‘acpi_device_handle’; did you mean ‘acpi_fwnode_handle’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:103:30: warning: initialization of ‘acpi_handle’ {aka ‘void *’} from ‘int’ makes pointer from integer without a cast [-Wint-conversion]
drivers/media/pci/intel/ipu-bridge.c:110:17: error: implicit declaration of function ‘for_each_acpi_dev_match’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:110:74: error: expected ‘;’ before ‘for_each_acpi_consumer_dev’
drivers/media/pci/intel/ipu-bridge.c:104:29: warning: unused variable ‘consumer’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:103:21: warning: unused variable ‘handle’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:166:38: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:185:43: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:191:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:196:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:202:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:223:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:236:18: error: implicit declaration of function ‘acpi_get_physical_device_location’ [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:236:56: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:238:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:256:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:275:31: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:280:30: error: invalid use of undefined type ‘struct acpi_device’
drivers/media/pci/intel/ipu-bridge.c:469:26: error: implicit declaration of function ‘acpi_device_hid’; did you mean ‘dmi_device_id’? [-Werror=implicit-function-declaration]
drivers/media/pci/intel/ipu-bridge.c:468:74: warning: format ‘%s’ expects argument of type ‘char *’, but argument 4 has type ‘int’ [-Wformat=]
drivers/media/pci/intel/ipu-bridge.c:637:58: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:696:1: warning: label ‘err_put_adev’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:693:1: warning: label ‘err_put_ivsc’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:691:1: warning: label ‘err_free_swnodes’ defined but not used [-Wunused-label]
drivers/media/pci/intel/ipu-bridge.c:632:40: warning: unused variable ‘primary’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:632:31: warning: unused variable ‘fwnode’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:733:73: error: expected ‘;’ before ‘{’ token
drivers/media/pci/intel/ipu-bridge.c:725:24: warning: unused variable ‘csi_dev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:724:43: warning: unused variable ‘adev’ [-Wunused-variable]
drivers/media/pci/intel/ipu-bridge.c:599:12: warning: ‘ipu_bridge_instantiate_ivsc’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:444:13: warning: ‘ipu_bridge_create_connection_swnodes’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:297:13: warning: ‘ipu_bridge_create_fwnode_properties’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu-bridge.c:155:12: warning: ‘ipu_bridge_check_ivsc_dev’ defined but not used [-Wunused-function]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Currently, when using WCN7850 or QCN9274 as AP, ath12k always performs down
grade phy mode operation regardless of whether the firmware supports EHT
capability or not and then vdev will start in HE mode. When stations that
support EHT capability try to connect to the AP, the AP will set phy mode
to EHT after receiving the association request packet, and then send
WMI_PEER_ASSOC_CMDID command to firmware, AP’s firmware will crash.
This is because when the ath12k_mac_copy_sband_iftype_data() function
handles EHT capability, it does not copy the EHT capability into the
iftype[band][type] array according to the interface type. So, interface
type should not be used as an index to get eht_cap in
ath12k_mac_check_down_grade_phy_mode() function.
To address this issue, use types_mask to select the eht_cap in
ath12k_mac_check_down_grade_phy_mode() function.
This patch affects QCN9274 and WCN7850 because they have the same issue.
Hostapd log:
wlo1: STA 02:03:7f:37:12:34 IEEE 802.11: Could not set STA to kernel driver
Kernel log:
[270894.816076] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_SET_PARAM cmd
[270894.816111] ath12k_pci 0000:03:00.0: failed to setup peer SMPS for vdev 0: -108
[270894.816122] ath12k_pci 0000:03:00.0: Failed to associate station: 02:03:7f:37:12:34
[270894.843389] ieee80211 phy5: Hardware restart was requested
[270894.843517] ath12k_pci 0000:03:00.0: failed to lookup peer 02:03:7f:37:12:34 on vdev 0
[270894.843616] ath12k_pci 0000:03:00.0: failed to send WMI_PEER_DELETE cmd
[270894.843650] ath12k_pci 0000:03:00.0: failed to delete peer vdev_id 0 addr 02:03:7f:37:12:34 ret -108
[270894.843663] ath12k_pci 0000:03:00.0: Failed to delete peer: 02:03:7f:37:12:34 for VDEV: 0
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Lingbo Kong <quic_lingbok@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240425083837.5340-1-quic_lingbok@quicinc.com
Replace the old helpers with its modern alternative.
Now we do not need to set '__maybe_unused' annotations when we are not
enabling the PM configurations.
It fixes the following warnings:
drivers/media/pci/intel/ipu6/ipu6.c:841:12: warning: ‘ipu6_runtime_resume’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu6/ipu6.c:806:12: warning: ‘ipu6_resume’ defined but not used [-Wunused-function]
drivers/media/pci/intel/ipu6/ipu6.c:801:12: warning: ‘ipu6_suspend’ defined but not used [-Wunused-function]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The driver can only match the device vide the DT table, so the table
should always be used, of_match_ptr does not make sense here.
It fixes this warning:
drivers/media/platform/broadcom/bcm2835-unicam.c:2724:34: warning: ‘unicam_of_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
arch/sh/boot/compressed/misc.c:110:6: warning: no previous prototype for ‘ftrace_stub’ [-Wmissing-prototypes]
arch/sh/boot/compressed/misc.c:113:6: warning: no previous prototype for ‘arch_ftrace_ops_list_func’ [-Wmissing-prototypes]
arch/sh/boot/compressed/misc.c:123:6: warning: no previous prototype for ‘decompress_kernel’ [-Wmissing-prototypes]
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/b7ea770a3bf26fb2a5f59f4bb83072b2526f7134.1713959841.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Commit 37744feebc ("sh: remove sh5 support") in v5.8 forgot to
remove the sh5 cache handling.
Suggested-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/23e9b3fd0d78e46c9fc1835852ba226aba92c3ca.1713959531.git.geert+renesas@glider.be
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
The J2 SPI controller bindings never allowed spi-max-frequency property
in the controller node. Neither old spi-bus.txt bindings, nor new DT
schema allows it. Linux driver does not parse that property from
controller node, thus drop it from DTS as incorrect hardware
description. The SPI child device has already the same property with
the same value, so functionality should not be affected.
Cc: Kousik Sanagavarapu <five231003@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Tested-by: Rob Landley <rob@landley.net>
Link: https://lore.kernel.org/r/20240322064221.25776-1-krzysztof.kozlowski@linaro.org
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Link: https://lore.kernel.org/r/20240306211947.97103-2-u.kleine-koenig@pengutronix.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
