tls_sk_poll is called without locking the socket, and needs to read
strp->msg_ready (via tls_strp_msg_ready). Convert msg_ready to a bool
and use READ_ONCE/WRITE_ONCE where needed. The remaining reads are
only performed when the socket is locked.
Fixes: 121dca784f ("tls: suppress wakeups unless we have a full record")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/0b7ee062319037cf86af6b317b3d72f7bfcd2e97.1713797701.git.sd@queasysnail.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In scenario where pin is registered with multiple parent pins via
dpll_pin_on_pin_register(..), all belonging to the same dpll device.
A second call to dpll_pin_on_pin_unregister(..) would cause a call trace,
as it tries to use already released registration resources (due to fix
introduced in b446631f35). In this scenario pin was registered twice,
so resources are not yet expected to be release until each registered
pin/pin pair is unregistered.
Currently, the following crash/call trace is produced when ice driver is
removed on the system with installed E810T NIC which includes dpll device:
WARNING: CPU: 51 PID: 9155 at drivers/dpll/dpll_core.c:809 dpll_pin_ops+0x20/0x30
RIP: 0010:dpll_pin_ops+0x20/0x30
Call Trace:
? __warn+0x7f/0x130
? dpll_pin_ops+0x20/0x30
dpll_msg_add_pin_freq+0x37/0x1d0
dpll_cmd_pin_get_one+0x1c0/0x400
? __nlmsg_put+0x63/0x80
dpll_pin_event_send+0x93/0x140
dpll_pin_on_pin_unregister+0x3f/0x100
ice_dpll_deinit_pins+0xa1/0x230 [ice]
ice_remove+0xf1/0x210 [ice]
Fix by adding a parent pointer as a cookie when creating a registration,
also when searching for it. For the regular pins pass NULL, this allows to
create separated registration for each parent the pin is registered with.
Fixes: b446631f35 ("dpll: fix dpll_xa_ref_*_del() for multiple registrations")
Signed-off-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240424101636.1491424-1-arkadiusz.kubalewski@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clang static checker(scan-build) warning：
drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c:line 2184, column 2
Attempt to free released memory.
npc_mcam_rsrcs_deinit() has released 'mcam->counters.bmap'. Deleted this
redundant kfree() to fix this double free problem.
Fixes: dd78428786 ("octeontx2-af: Add new devlink param to configure maximum usable NIX block LFs")
Signed-off-by: Su Hui <suhui@nfschina.com>
Reviewed-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Reviewed-by: Hariprasad Kelam <hkelam@marvell.com>
Link: https://lore.kernel.org/r/20240424022724.144587-1-suhui@nfschina.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Apart from the obvious spelling typo, use the correct values for
infinity quantum/timeout settings (it's 0x0 instead of 0xFFFFFFFF).
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Piotr Piórkowski <piotr.piorkowski@intel.com>
Reviewed-by: Piotr Piórkowski <piotr.piorkowski@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240424140506.2133-1-michal.wajdeczko@intel.com
The CPTS, by design, captures the messageType (Sync, Delay_Req, etc.)
field from the second nibble of the PTP header which is defined in the
PTPv2 (1588-2008) specification. In the PTPv1 (1588-2002) specification
the first two bytes of the PTP header are defined as the versionType
which is always 0x0001. This means that any PTPv1 packets that are
tagged for TX timestamping by the CPTS will have their messageType set
to 0x0 which corresponds to a Sync message type. This causes issues
when a PTPv1 stack is expecting a Delay_Req (messageType: 0x1)
timestamp that never appears.
Fix this by checking if the ptp_class of the timestamped TX packet is
PTP_CLASS_V1 and then matching the PTP sequence ID to the stored
sequence ID in the skb->cb data structure. If the sequence IDs match
and the packet is of type PTPv1 then there is a chance that the
messageType has been incorrectly stored by the CPTS so overwrite the
messageType stored by the CPTS with the messageType from the skb->cb
data structure. This allows the PTPv1 stack to receive TX timestamps
for Delay_Req packets which are necessary to lock onto a PTP Leader.
Signed-off-by: Jason Reeder <jreeder@ti.com>
Signed-off-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Tested-by: Ed Trexel <ed.trexel@hp.com>
Fixes: f6bd59526c ("net: ethernet: ti: introduce am654 common platform time sync driver")
Link: https://lore.kernel.org/r/20240424071626.32558-1-r-gunasekaran@ti.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-04-23 (i40e, iavf, ice)
This series contains updates to i40e, iavf, and ice drivers.
Sindhu removes WQ_MEM_RECLAIM flag from workqueue for i40e.
Erwan Velu adjusts message to avoid confusion on base being reported on
i40e.
Sudheer corrects insufficient check for TC equality on iavf.
Jake corrects ordering of locks to avoid possible deadlock on ice.
====================
Link: https://lore.kernel.org/r/20240423182723.740401-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Rahul Rameshbabu says:
====================
Fix isolation of broadcast traffic and unmatched unicast traffic with MACsec offload
Some device drivers support devices that enable them to annotate whether a
Rx skb refers to a packet that was processed by the MACsec offloading
functionality of the device. Logic in the Rx handling for MACsec offload
does not utilize this information to preemptively avoid forwarding to the
macsec netdev currently. Because of this, things like multicast messages or
unicast messages with an unmatched destination address such as ARP requests
are forwarded to the macsec netdev whether the message received was MACsec
encrypted or not. The goal of this patch series is to improve the Rx
handling for MACsec offload for devices capable of annotating skbs received
that were decrypted by the NIC offload for MACsec.
Here is a summary of the issue that occurs with the existing logic today.
* The current design of the MACsec offload handling path tries to use
"best guess" mechanisms for determining whether a packet associated
with the currently handled skb in the datapath was processed via HW
offload
* The best guess mechanism uses the following heuristic logic (in order of
precedence)
- Check if header destination MAC address matches MACsec netdev MAC
address -> forward to MACsec port
- Check if packet is multicast traffic -> forward to MACsec port
- MACsec security channel was able to be looked up from skb offload
context (mlx5 only) -> forward to MACsec port
* Problem: plaintext traffic can potentially solicit a MACsec encrypted
response from the offload device
- Core aspect of MACsec is that it identifies unauthorized LAN connections
and excludes them from communication
+ This behavior can be seen when not enabling offload for MACsec
- The offload behavior violates this principle in MACsec
I believe this behavior is a security bug since applications utilizing
MACsec could be exploited using this behavior, and the correct way to
resolve this is by having the hardware correctly indicate whether MACsec
offload occurred for the packet or not. In the patches in this series, I
leave a warning for when the problematic path occurs because I cannot
figure out a secure way to fix the security issue that applies to the core
MACsec offload handling in the Rx path without breaking MACsec offload for
other vendors.
Shown at the bottom is an example use case where plaintext traffic sent to
a physical port of a NIC configured for MACsec offload is unable to be
handled correctly by the software stack when the NIC provides awareness to
the kernel about whether the received packet is MACsec traffic or not. In
this specific example, plaintext ARP requests are being responded with
MACsec encrypted ARP replies (which leads to routing information being
unable to be built for the requester).
Side 1
ip link del macsec0
ip address flush mlx5_1
ip address add 1.1.1.1/24 dev mlx5_1
ip link set dev mlx5_1 up
ip link add link mlx5_1 macsec0 type macsec sci 1 encrypt on
ip link set dev macsec0 address 00:11:22:33:44:66
ip macsec offload macsec0 mac
ip macsec add macsec0 tx sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
ip macsec add macsec0 rx sci 2 on
ip macsec add macsec0 rx sci 2 sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5
ip address flush macsec0
ip address add 2.2.2.1/24 dev macsec0
ip link set dev macsec0 up
# macsec0 enters promiscuous mode.
# This enables all traffic received on macsec_vlan to be processed by
# the macsec offload rx datapath. This however means that traffic
# meant to be received by mlx5_1 will be incorrectly steered to
# macsec0 as well.
ip link add link macsec0 name macsec_vlan type vlan id 1
ip link set dev macsec_vlan address 00:11:22:33:44:88
ip address flush macsec_vlan
ip address add 3.3.3.1/24 dev macsec_vlan
ip link set dev macsec_vlan up
Side 2
ip link del macsec0
ip address flush mlx5_1
ip address add 1.1.1.2/24 dev mlx5_1
ip link set dev mlx5_1 up
ip link add link mlx5_1 macsec0 type macsec sci 2 encrypt on
ip link set dev macsec0 address 00:11:22:33:44:77
ip macsec offload macsec0 mac
ip macsec add macsec0 tx sa 0 pn 1 on key 00 ead3664f508eb06c40ac7104cdae4ce5
ip macsec add macsec0 rx sci 1 on
ip macsec add macsec0 rx sci 1 sa 0 pn 1 on key 00 dffafc8d7b9a43d5b9a3dfbbf6a30c16
ip address flush macsec0
ip address add 2.2.2.2/24 dev macsec0
ip link set dev macsec0 up
# macsec0 enters promiscuous mode.
# This enables all traffic received on macsec_vlan to be processed by
# the macsec offload rx datapath. This however means that traffic
# meant to be received by mlx5_1 will be incorrectly steered to
# macsec0 as well.
ip link add link macsec0 name macsec_vlan type vlan id 1
ip link set dev macsec_vlan address 00:11:22:33:44:99
ip address flush macsec_vlan
ip address add 3.3.3.2/24 dev macsec_vlan
ip link set dev macsec_vlan up
Side 1
ping -I mlx5_1 1.1.1.2
PING 1.1.1.2 (1.1.1.2) from 1.1.1.1 mlx5_1: 56(84) bytes of data.
From 1.1.1.1 icmp_seq=1 Destination Host Unreachable
ping: sendmsg: No route to host
From 1.1.1.1 icmp_seq=2 Destination Host Unreachable
From 1.1.1.1 icmp_seq=3 Destination Host Unreachable
Changes:
v2->v3:
* Made dev paramater const for eth_skb_pkt_type helper as suggested by Sabrina
Dubroca <sd@queasysnail.net>
v1->v2:
* Fixed series subject to detail the issue being fixed
* Removed strange characters from cover letter
* Added comment in example that illustrates the impact involving
promiscuous mode
* Added patch for generalizing packet type detection
* Added Fixes: tags and targeting net
* Removed pointless warning in the heuristic Rx path for macsec offload
* Applied small refactor in Rx path offload to minimize scope of rx_sc
local variable
Link: https://github.com/Binary-Eater/macsec-rx-offload/blob/trunk/MACsec_violation_in_core_stack_offload_rx_handling.pdf
Link: https://lore.kernel.org/netdev/20240419213033.400467-5-rrameshbabu@nvidia.com/
Link: https://lore.kernel.org/netdev/20240419011740.333714-1-rrameshbabu@nvidia.com/
Link: https://lore.kernel.org/netdev/87r0l25y1c.fsf@nvidia.com/
Link: https://lore.kernel.org/netdev/20231116182900.46052-1-rrameshbabu@nvidia.com/
====================
Link: https://lore.kernel.org/r/20240423181319.115860-1-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
9f74a3dfcf ("ice: Fix VF Reset paths when interface in a failed over
aggregate"), the ice driver has acquired the LAG mutex in ice_reset_vf().
The commit placed this lock acquisition just prior to the acquisition of
the VF configuration lock.
If ice_reset_vf() acquires the configuration lock via the ICE_VF_RESET_LOCK
flag, this could deadlock with ice_vc_cfg_qs_msg() because it always
acquires the locks in the order of the VF configuration lock and then the
LAG mutex.
Lockdep reports this violation almost immediately on creating and then
removing 2 VF:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-rc6 #54 Tainted: G W O
------------------------------------------------------
kworker/60:3/6771 is trying to acquire lock:
ff40d43e099380a0 (&vf->cfg_lock){+.+.}-{3:3}, at: ice_reset_vf+0x22f/0x4d0 [ice]
but task is already holding lock:
ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (&pf->lag_mutex){+.+.}-{3:3}:
__lock_acquire+0x4f8/0xb40
lock_acquire+0xd4/0x2d0
__mutex_lock+0x9b/0xbf0
ice_vc_cfg_qs_msg+0x45/0x690 [ice]
ice_vc_process_vf_msg+0x4f5/0x870 [ice]
__ice_clean_ctrlq+0x2b5/0x600 [ice]
ice_service_task+0x2c9/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
kthread+0x104/0x140
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
-> #0 (&vf->cfg_lock){+.+.}-{3:3}:
check_prev_add+0xe2/0xc50
validate_chain+0x558/0x800
__lock_acquire+0x4f8/0xb40
lock_acquire+0xd4/0x2d0
__mutex_lock+0x9b/0xbf0
ice_reset_vf+0x22f/0x4d0 [ice]
ice_process_vflr_event+0x98/0xd0 [ice]
ice_service_task+0x1cc/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
kthread+0x104/0x140
ret_from_fork+0x31/0x50
ret_from_fork_asm+0x1b/0x30
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
lock(&pf->lag_mutex);
lock(&vf->cfg_lock);
*** DEADLOCK ***
4 locks held by kworker/60:3/6771:
#0: ff40d43e05428b38 ((wq_completion)ice){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0
#1: ff50d06e05197e58 ((work_completion)(&pf->serv_task)){+.+.}-{0:0}, at: process_one_work+0x176/0x4d0
#2: ff40d43ea1960e50 (&pf->vfs.table_lock){+.+.}-{3:3}, at: ice_process_vflr_event+0x48/0xd0 [ice]
#3: ff40d43ea1961210 (&pf->lag_mutex){+.+.}-{3:3}, at: ice_reset_vf+0xb7/0x4d0 [ice]
stack backtrace:
CPU: 60 PID: 6771 Comm: kworker/60:3 Tainted: G W O 6.8.0-rc6 #54
Hardware name:
Workqueue: ice ice_service_task [ice]
Call Trace:
<TASK>
dump_stack_lvl+0x4a/0x80
check_noncircular+0x12d/0x150
check_prev_add+0xe2/0xc50
? save_trace+0x59/0x230
? add_chain_cache+0x109/0x450
validate_chain+0x558/0x800
__lock_acquire+0x4f8/0xb40
? lockdep_hardirqs_on+0x7d/0x100
lock_acquire+0xd4/0x2d0
? ice_reset_vf+0x22f/0x4d0 [ice]
? lock_is_held_type+0xc7/0x120
__mutex_lock+0x9b/0xbf0
? ice_reset_vf+0x22f/0x4d0 [ice]
? ice_reset_vf+0x22f/0x4d0 [ice]
? rcu_is_watching+0x11/0x50
? ice_reset_vf+0x22f/0x4d0 [ice]
ice_reset_vf+0x22f/0x4d0 [ice]
? process_one_work+0x176/0x4d0
ice_process_vflr_event+0x98/0xd0 [ice]
ice_service_task+0x1cc/0x480 [ice]
process_one_work+0x1e9/0x4d0
worker_thread+0x1e1/0x3d0
? __pfx_worker_thread+0x10/0x10
kthread+0x104/0x140
? __pfx_kthread+0x10/0x10
ret_from_fork+0x31/0x50
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1b/0x30
</TASK>
To avoid deadlock, we must acquire the LAG mutex only after acquiring the
VF configuration lock. Fix the ice_reset_vf() to acquire the LAG mutex only
after we either acquire or check that the VF configuration lock is held.
Fixes: 9f74a3dfcf ("ice: Fix VF Reset paths when interface in a failed over aggregate")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Tested-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240423182723.740401-5-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Same number of TCs doesn't imply that underlying TC configs are
same. The config could be different due to difference in number
of queues in each TC. Add utility function to determine if TC
configs are same.
Fixes: d5b33d0244 ("i40evf: add ndo_setup_tc callback to i40evf")
Signed-off-by: Sudheer Mogilappagari <sudheer.mogilappagari@intel.com>
Tested-by: Mineri Bhange <minerix.bhange@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240423182723.740401-4-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the MFS is set below the default (0x2600), a warning message is
reported like the following :
MFS for port 1 has been set below the default: 600
This message is a bit confusing as the number shown here (600) is in
fact an hexa number: 0x600 = 1536
Without any explicit "0x" prefix, this message is read like the MFS is
set to 600 bytes.
MFS, as per MTUs, are usually expressed in decimal base.
This commit reports both current and default MFS values in decimal
so it's less confusing for end-users.
A typical warning message looks like the following :
MFS for port 1 (1536) has been set below the default (9728)
Signed-off-by: Erwan Velu <e.velu@criteo.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Fixes: 3a2c6ced90 ("i40e: Add a check to see if MFS is set")
Link: https://lore.kernel.org/r/20240423182723.740401-3-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rx_chn->irq[] array is unsigned int but it should be signed for the
error handling to work. Also if k3_udma_glue_rx_get_irq() returns zero
then we should return -ENXIO instead of success.
Fixes: 128d5874c0 ("net: ti: icssg-prueth: Add ICSSG ethernet driver")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Link: https://lore.kernel.org/r/05282415-e7f4-42f3-99f8-32fde8f30936@moroto.mountain
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mlx5 Rx flow steering and CQE handling enable the driver to be able to
update an skb's md_dst attribute as MACsec when MACsec traffic arrives when
a device is configured for offloading. Advertise this to the core stack to
take advantage of this capability.
Cc: stable@vger.kernel.org
Fixes: b7c9400cbc ("net/mlx5e: Implement MACsec Rx data path using MACsec skb_metadata_dst")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240423181319.115860-5-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Can now correctly identify where the packets should be delivered by using
md_dst or its absence on devices that provide it.
This detection is not possible without device drivers that update md_dst. A
fallback pattern should be used for supporting such device drivers. This
fallback mode causes multicast messages to be cloned to both the non-macsec
and macsec ports, independent of whether the multicast message received was
encrypted over MACsec or not. Other non-macsec traffic may also fail to be
handled correctly for devices in promiscuous mode.
Link: https://lore.kernel.org/netdev/ZULRxX9eIbFiVi7v@hog/
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: stable@vger.kernel.org
Fixes: 860ead89b8 ("net/macsec: Add MACsec skb_metadata_dst Rx Data path support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240423181319.115860-4-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Cannot know whether a Rx skb missing md_dst is intended for MACsec or not
without knowing whether the device is able to update this field during an
offload. Assume that an offload to a MACsec device cannot support updating
md_dst by default. Capable devices can advertise that they do indicate that
an skb is related to a MACsec offloaded packet using the md_dst.
Cc: Sabrina Dubroca <sd@queasysnail.net>
Cc: stable@vger.kernel.org
Fixes: 860ead89b8 ("net/macsec: Add MACsec skb_metadata_dst Rx Data path support")
Signed-off-by: Rahul Rameshbabu <rrameshbabu@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/20240423181319.115860-2-rrameshbabu@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Allowing retries for everything is arguably the right thing to do, now
that every command type is async read from the start. But it's exposed a
few issues around missing check for a retry (which cca6571381 exposed),
and the fixup commit for that isn't necessarily 100% sound in terms of
iov_iter state.
For now, just revert these two commits. This unfortunately then re-opens
the fact that -EAGAIN can get bubbled to userspace for some cases where
the kernel very well could just sanely retry them. But until we have all
the conditions covered around that, we cannot safely enable that.
This reverts commit df604d2ad4.
This reverts commit cca6571381.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The port mux of VP2 should be RK3568_OVL_PORT_SET__PORT2_MUX.
Fixes: 604be85547 ("drm/rockchip: Add VOP2 driver")
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422101905.32703-2-andyshrk@163.com
This reverts commit 1dccdba084.
In userspace a different approach was choosen - hwdb. As a result, there
is no need for these values.
Signed-off-by: Christian Gmeiner <cgmeiner@igalia.com>
Reviewed-by: Tomeu Vizoso <tomeu@tomeuvizoso.net>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Some of the MHI modems like SDX65 based ones are capable of entering the
EDL mode as per the standard triggering mechanism defined in the MHI spec
v1.2. So let's add a common mhi_pci_generic_edl_trigger() function that
triggers the EDL mode in the device when user writes to the
/sys/bus/mhi/devices/.../trigger_edl file.
As per the spec, the EDL mode can be triggered by writing a cookie to the
EDL doorbell register and then resetting the device.
Devices supporting this standard way of entering EDL mode can set the
mhi_pci_dev_info::edl_trigger flag.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1713928915-18229-4-git-send-email-quic_qianyu@quicinc.com
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
commit 4bce244272 ("drm/etnaviv: disable tx clock gating for GC7000
rev6203") accidentally applied the fix for i.MX8MN errata ERR050226 to
GC2000 instead of GC7000, failing to disable tx clock gating for GC7000
rev 0x6023 as intended.
Additional clean-up further propagated this issue, partially breaking
the clock gating fixes added for GC7000 rev 6202 in commit 432f51e7de
("drm/etnaviv: add clock gating workaround for GC7000 r6202").
Signed-off-by: Derek Foreman <derek.foreman@collabora.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Some controllers may want to access a specific doorbell register. Hence add
a new API that reads the CHDBOFF register and returns the offset of the
doorbell registers from MMIO base, so that the controller can calculate the
address of the specific doorbell register by adding the register offset
with doorbell offset and MMIO base address.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Link: https://lore.kernel.org/r/1713928915-18229-3-git-send-email-quic_qianyu@quicinc.com
[mani: reworded commit message and Kdoc]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Add sysfs entry to allow users of MHI bus to force device to enter EDL
(Emergency Download) mode to download the device firmware. Since there is
no guarantee that all the devices will support EDL mode, the sysfs entry
is kept as an optional one and will appear only for the supported devices.
Controllers supporting the EDL mode are expected to provide edl_trigger()
callback that puts the device into EDL mode.
Signed-off-by: Qiang Yu <quic_qianyu@quicinc.com>
Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com>
Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/1713928915-18229-2-git-send-email-quic_qianyu@quicinc.com
[mani: fixed the kernel version and reworded the commit message]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Currently conntrack_dump_flush test program always runs when passing
TEST_PROGS argument:
% make -C tools/testing/selftests TARGETS=net/netfilter \
TEST_PROGS=conntrack_ipip_mtu.sh run_tests
make: Entering [..]
TAP version 13
1..2 [..]
selftests: net/netfilter: conntrack_dump_flush [..]
Move away from TEST_CUSTOM_PROGS to avoid this. After this,
above command will only run the program specified in TEST_PROGS.
Link: https://lore.kernel.org/netdev/20240423191609.70c14c42@kernel.org/
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20240424095824.5555-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
One of my CI runs popped the following lockdep splat
======================================================
WARNING: possible circular locking dependency detected
6.9.0-rc4+ #1 Not tainted
------------------------------------------------------
btrfs/471533 is trying to acquire lock:
ffff92ba46980850 (&fs_info->cleaner_mutex){+.+.}-{3:3}, at: btrfs_quota_disable+0x54/0x4c0
but task is already holding lock:
ffff92ba46980bd0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1c8f/0x2600
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&fs_info->subvol_sem){++++}-{3:3}:
down_read+0x42/0x170
btrfs_rename+0x607/0xb00
btrfs_rename2+0x2e/0x70
vfs_rename+0xaf8/0xfc0
do_renameat2+0x586/0x600
__x64_sys_rename+0x43/0x50
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #1 (&sb->s_type->i_mutex_key#16){++++}-{3:3}:
down_write+0x3f/0xc0
btrfs_inode_lock+0x40/0x70
prealloc_file_extent_cluster+0x1b0/0x370
relocate_file_extent_cluster+0xb2/0x720
relocate_data_extent+0x107/0x160
relocate_block_group+0x442/0x550
btrfs_relocate_block_group+0x2cb/0x4b0
btrfs_relocate_chunk+0x50/0x1b0
btrfs_balance+0x92f/0x13d0
btrfs_ioctl+0x1abf/0x2600
__x64_sys_ioctl+0x97/0xd0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
-> #0 (&fs_info->cleaner_mutex){+.+.}-{3:3}:
__lock_acquire+0x13e7/0x2180
lock_acquire+0xcb/0x2e0
__mutex_lock+0xbe/0xc00
btrfs_quota_disable+0x54/0x4c0
btrfs_ioctl+0x206b/0x2600
__x64_sys_ioctl+0x97/0xd0
do_syscall_64+0x95/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
other info that might help us debug this:
Chain exists of:
&fs_info->cleaner_mutex --> &sb->s_type->i_mutex_key#16 --> &fs_info->subvol_sem
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&fs_info->subvol_sem);
lock(&sb->s_type->i_mutex_key#16);
lock(&fs_info->subvol_sem);
lock(&fs_info->cleaner_mutex);
*** DEADLOCK ***
2 locks held by btrfs/471533:
#0: ffff92ba4319e420 (sb_writers#14){.+.+}-{0:0}, at: btrfs_ioctl+0x3b5/0x2600
#1: ffff92ba46980bd0 (&fs_info->subvol_sem){++++}-{3:3}, at: btrfs_ioctl+0x1c8f/0x2600
stack backtrace:
CPU: 1 PID: 471533 Comm: btrfs Kdump: loaded Not tainted 6.9.0-rc4+ #1
Call Trace:
<TASK>
dump_stack_lvl+0x77/0xb0
check_noncircular+0x148/0x160
? lock_acquire+0xcb/0x2e0
__lock_acquire+0x13e7/0x2180
lock_acquire+0xcb/0x2e0
? btrfs_quota_disable+0x54/0x4c0
? lock_is_held_type+0x9a/0x110
__mutex_lock+0xbe/0xc00
? btrfs_quota_disable+0x54/0x4c0
? srso_return_thunk+0x5/0x5f
? lock_acquire+0xcb/0x2e0
? btrfs_quota_disable+0x54/0x4c0
? btrfs_quota_disable+0x54/0x4c0
btrfs_quota_disable+0x54/0x4c0
btrfs_ioctl+0x206b/0x2600
? srso_return_thunk+0x5/0x5f
? __do_sys_statfs+0x61/0x70
__x64_sys_ioctl+0x97/0xd0
do_syscall_64+0x95/0x180
? srso_return_thunk+0x5/0x5f
? reacquire_held_locks+0xd1/0x1f0
? do_user_addr_fault+0x307/0x8a0
? srso_return_thunk+0x5/0x5f
? lock_acquire+0xcb/0x2e0
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? find_held_lock+0x2b/0x80
? srso_return_thunk+0x5/0x5f
? lock_release+0xca/0x2a0
? srso_return_thunk+0x5/0x5f
? do_user_addr_fault+0x35c/0x8a0
? srso_return_thunk+0x5/0x5f
? trace_hardirqs_off+0x4b/0xc0
? srso_return_thunk+0x5/0x5f
? lockdep_hardirqs_on_prepare+0xde/0x190
? srso_return_thunk+0x5/0x5f
This happens because when we call rename we already have the inode mutex
held, and then we acquire the subvol_sem if we are a subvolume. This
makes the dependency
inode lock -> subvol sem
When we're running data relocation we will preallocate space for the
data relocation inode, and we always run the relocation under the
->cleaner_mutex. This now creates the dependency of
cleaner_mutex -> inode lock (from the prealloc) -> subvol_sem
Qgroup delete is doing this in the opposite order, it is acquiring the
subvol_sem and then it is acquiring the cleaner_mutex, which results in
this lockdep splat. This deadlock can't happen in reality, because we
won't ever rename the data reloc inode, nor is the data reloc inode a
subvolume.
However this is fairly easy to fix, simply take the cleaner mutex in the
case where we are disabling qgroups before we take the subvol_sem. This
resolves the lockdep splat.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The previous patch that replaced BUG_ON by error handling forgot to
unlock the mutex in the error path.
Link: https://lore.kernel.org/all/Zh%2fHpAGFqa7YAFuM@duo.ucw.cz
Reported-by: Pavel Machek <pavel@denx.de>
Fixes: 7411055db5 ("btrfs: handle chunk tree lookup error in btrfs_relocate_sys_chunks()")
CC: stable@vger.kernel.org
Reviewed-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Dominique Martinet <dominique.martinet@atmark-techno.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There is an smp function call named reset_counters() to init PMU
registers of every CPU in PMU initialization state. It requires that all
CPUs are online. However there is an early_initcall() wrapper for the
PMU init funciton init_hw_perf_events(), so that pmu init funciton is
called in do_pre_smp_initcalls() which before function smp_init().
Function reset_counters() cannot work on other CPUs since they haven't
boot up still.
Here replace the wrapper early_initcall() with pure_initcall(), so that
the PMU init function is called after every cpu is online.
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
Currently, the enforce_vmpl0() function uses a set argument when modifying
the VMPL1 permissions used to test for VMPL0. If the guest is not running
at VMPL0, the guest self-terminates.
The function is just a wrapper for a fixed RMPADJUST function. Eliminate
the function and perform the RMPADJUST directly.
No functional change.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/ed01ddf04bfb475596b24b634fd26cffaa85173a.1713974291.git.thomas.lendacky@amd.com
The snp_init() function in boot/compressed/sev.c is local to that file, is
not called from outside of the file and is independent of the snp_init()
function in kernel/sev.c. Change the name to better differentiate when
each function is used.
Move the renamed snp_init() and related functions up in the file to avoid
having to add a forward declaration and make the function static.
No functional change.
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/afda29585c2724b9698003f24cefa77eb35f4ffb.1713974291.git.thomas.lendacky@amd.com
Ending a struct name with "layout" is a little redundant, so shorten the
snp_secrets_page_layout name to just snp_secrets_page.
No functional change.
[ bp: Rename the local pointer to "secrets" too for more clarity. ]
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/bc8d58302c6ab66c3beeab50cce3ec2c6bd72d6c.1713974291.git.thomas.lendacky@amd.com
Surprisingly many places depend on debugfs.h to be included via
drm_print.h. Fix them.
v3: Also fix armada, ite-it6505, imagination, msm, sti, vc4, and xe
v2: Also fix ivpu and vmwgfx
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240410141434.157908-1-jani.nikula@intel.com
Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> # drm/msm
Acked-by: Matt Coster <matt.coster@imgtec.com> # drm/imagination
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Lucas De Marchi <lucas.demarchi@intel.com>
Acked-by: Robert Foss <rfoss@kernel.org> #drm/bridge
Reviewed-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240422121011.4133236-1-jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Changhui reported a kernel crash when running this simple shell
reproducer:
# cd /sys/kernel/debug/block && find . -type f -exec grep -aH . {} \;
The above results in a NULL pointer dereference if a device does not have
a zone_wplugs_hash allocated.
To fix this, return early if we don't have a zone_wplugs_hash.
Reported-by: Changhui Zhong <czhong@redhat.com>
Fixes: a98b05b02f ("block: Replace zone_wlock debugfs entry with zone_wplugs entry")
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Link: https://lore.kernel.org/r/e5fec079dfca448cc21c425cfa5d7b291f5faa67.1714046443.git.johannes.thumshirn@wdc.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Explicitly disallow enabling mitigations at runtime for kernels that were
built with CONFIG_CPU_MITIGATIONS=n, as some architectures may omit code
entirely if mitigations are disabled at compile time.
E.g. on x86, a large pile of Kconfigs are buried behind CPU_MITIGATIONS,
and trying to provide sane behavior for retroactively enabling mitigations
is extremely difficult, bordering on impossible. E.g. page table isolation
and call depth tracking require build-time support, BHI mitigations will
still be off without additional kernel parameters, etc.
[ bp: Touchups. ]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240420000556.2645001-3-seanjc@google.com
Rename x86's to CPU_MITIGATIONS, define it in generic code, and force it
on for all architectures exception x86. A recent commit to turn
mitigations off by default if SPECULATION_MITIGATIONS=n kinda sorta
missed that "cpu_mitigations" is completely generic, whereas
SPECULATION_MITIGATIONS is x86-specific.
Rename x86's SPECULATIVE_MITIGATIONS instead of keeping both and have it
select CPU_MITIGATIONS, as having two configs for the same thing is
unnecessary and confusing. This will also allow x86 to use the knob to
manage mitigations that aren't strictly related to speculative
execution.
Use another Kconfig to communicate to common code that CPU_MITIGATIONS
is already defined instead of having x86's menu depend on the common
CPU_MITIGATIONS. This allows keeping a single point of contact for all
of x86's mitigations, and it's not clear that other architectures *want*
to allow disabling mitigations at compile-time.
Fixes: f337a6a21e ("x86/cpu: Actually turn off mitigations by default for SPECULATION_MITIGATIONS=n")
Closes: https://lkml.kernel.org/r/20240413115324.53303a68%40canb.auug.org.au
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240420000556.2645001-2-seanjc@google.com
Using GIC_CPU_MASK_SIMPLE(x), x should reflect the number of CPUs.
STM32MP251 is a single core Cortex A35, STM32MP253 is a dual core CA35.
Fixes: 5d30d03aaf ("arm64: dts: st: introduce stm32mp25 SoCs family")
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add properties for spi3 and spi8 available on the stm32mp257f-ev1.
Both are kept disabled since only used via the gpio expansion connector.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the spi3 and spi8 pins used on STM32MP257F-EV1 board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the 8 nodes for all spi instances available on the stm32mp251.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add properties for i2c2 and i2c8 available on the stm32mp257f-ev1.
i2c2 is enabled since several devices are attached to it while
i2c8 is kept disabled since only used via the gpio expansion connector.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the i2c2 and i2c8 pins used on STM32MP257F-EV1 board.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add the 8 nodes for all i2c instances available on the stm32mp251.
Signed-off-by: Alain Volmat <alain.volmat@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add RCC support to manage clocks and resets on the STM32MP25.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
STM32MP13x SoC family embeds a new version of LTDC (Liquid crystal
display - Thin film transistor) Display Controller.
It provides a parallel digital RGB (red, green, blue) and signals for
horizontal, vertical synchronization, pixel clock and data enable as
output to interface directly to a variety of LCD-TFT panels.
Main features
* 2 input layers blended together to compose the display
* Cropping of layers from any input size and location
* Multiple input pixel formats:
– Predefined ARGB, with 7 formats: ARGB8888, ABGR8888, RGBA8888,
BGRA8888, RGB565, BGR565, RGB888packed.
– Flexible ARGB, allowing any width and location for A,R,G,B
components.
– Predefined YUV, with 3 formats: YUV422-1L (FourCC: YUYV,
Interleaved), YUV420-2L (FourCC: NV12, semi planar), YUV420-3L
(FourCC: Yxx, full planar) with some flexibility on the sequence of
the component.
* Color look-up table (CLUT) up to 256 colors (256x24 bits) per layer
* Color transparency keying
* Composition with flexible window position and size versus output
display
* Blending with flexible layer order and alpha value (per pixel or
constant)
* Background underlying color
* Gamma with non-linear configurable table
* Dithering for output with less bits per component (pseudo-random on
2 bits)
* Polarity inversion for HSync, VSync, and DataEnable outputs
* Output as RGB888 24 bpp or YUV422 16 bpp
* Secure layer (using Layer2) capability, with grouped regs and
additional interrupt set
* Interrupts based on 7 different events
* AXI master interface with long efficient bursts (64 or 128 bytes)
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Signed-off-by: Yannick Fertre <yannick.fertre@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This device inherits properties from panel-common. Those should be allowed
to use, instead of specifying properties to true for each specific use.
Signed-off-by: Raphael Gallais-Pou <raphael.gallais-pou@foss.st.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This patch adds STM32 PWR regulators DT support on stm32mp131.
This requires TFA to clear RCC_SECCFGR, is disabled by default
and can only be enabled on board DT level.
Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
access-controllers is an optional property that allows a peripheral to
refer to one or more domain access controller(s).
Signed-off-by: Hugues Fruchet <hugues.fruchet@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
