sg_overloaded is used instead of sg_overutilized to update
rd->sg_overutilized.
Fixes: 4475cd8bfd ("sched/balancing: Simplify the sg_status bitmask and use separate ->overloaded and ->overutilized flags")
Signed-off-by: Vincent Guittot <vincent.guittot@linaro.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240404155738.2866102-1-vincent.guittot@linaro.org
Optimize virt_spin_lock() to use simpler and faster:
atomic_try_cmpxchg(*ptr, &val, new)
instead of:
atomic_cmpxchg(*ptr, val, new) == val
The x86 CMPXCHG instruction returns success in the ZF flag, so
this change saves a compare after the CMPXCHG.
Also optimize retry loop a bit. atomic_try_cmpxchg() fails iff
&lock->val != 0, so there is no need to load and compare the
lock value again - cpu_relax() can be unconditinally called in
this case. This allows us to generate optimized:
1f: ba 01 00 00 00 mov $0x1,%edx
24: 8b 03 mov (%rbx),%eax
26: 85 c0 test %eax,%eax
28: 75 63 jne 8d <...>
2a: f0 0f b1 13 lock cmpxchg %edx,(%rbx)
2e: 75 5d jne 8d <...>
...
8d: f3 90 pause
8f: eb 93 jmp 24 <...>
instead of:
1f: ba 01 00 00 00 mov $0x1,%edx
24: 8b 03 mov (%rbx),%eax
26: 85 c0 test %eax,%eax
28: 75 13 jne 3d <...>
2a: f0 0f b1 13 lock cmpxchg %edx,(%rbx)
2e: 85 c0 test %eax,%eax
30: 75 f2 jne 24 <...>
...
3d: f3 90 pause
3f: eb e3 jmp 24 <...>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Waiman Long <longman@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: https://lore.kernel.org/r/20240422120054.199092-1-ubizjak@gmail.com
Macros __arch{,_try}_cmpxchg64_emu() are almost identical to their
local variants __arch{,_try}_cmpxchg64_emu_local(), differing only
by lock prefixes.
Merge these two macros by introducing additional macro parameters
to pass lock location and lock prefix from their respective static
inline functions.
No functional change intended.
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20240417175830.161561-1-ubizjak@gmail.com
The original Framework Laptop 13 platform (Intel 11th, 12th, and 13th
Generation at this time) uses a Microchip embedded controller in a
standard configuration.
The newer devices in this product line--Framework Laptop 13 and 16 (AMD
Ryzen)--use a NPCX embedded controller. However, they deviate from the
configuration of ChromeOS platforms built with the NPCX EC.
* The MMIO region for EC memory begins at port 0xE00 rather than the
expected 0x900.
cros_ec_lpc's quirks system is used to address this issue.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Mario Limonciello <superm1@gmail.com>
Link: https://lore.kernel.org/r/20240403004713.130365-5-dustin@howett.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Some devices ship a ChromeOS EC in a non-standard configuration. Quirks
allow cros_ec_lpc to account for these non-standard configurations.
It only supports one quirk right now:
- CROS_EC_LPC_QUIRK_REMAP_MEMORY: use a different port I/O base for
MMIO to the EC's memory region
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Mario Limonciello <superm1@gmail.com>
Link: https://lore.kernel.org/r/20240403004713.130365-4-dustin@howett.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
lpc_driver_data will be stored in drvdata until probe is complete.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Mario Limonciello <superm1@gmail.com>
Link: https://lore.kernel.org/r/20240403004713.130365-3-dustin@howett.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
lpc_driver_data stores the MMIO port base for EC mapped memory.
cros_ec_lpc_readmem uses this port base instead of hardcoding
EC_LPC_ADDR_MEMMAP.
Signed-off-by: Dustin L. Howett <dustin@howett.net>
Reviewed-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Thomas Weißschuh <linux@weissschuh.net>
Tested-by: Mario Limonciello <superm1@gmail.com>
Link: https://lore.kernel.org/r/20240403004713.130365-2-dustin@howett.net
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for those
drivers using them.
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Link: https://lore.kernel.org/r/20240405134151.5560-2-schnelle@linux.ibm.com
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
There is no platform driver in the file. Remove the redundant
MODULE_ALIAS().
Reviewed-by: Benson Leung <bleung@chromium.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240329075630.2069474-18-tzungbi@kernel.org
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Use the `DEFINE_RAW_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.
So, with these changes, fix the following warning:
drivers/platform/chrome/cros_ec_proto_test.c:1547:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/platform/chrome/cros_ec_proto_test.c:1607:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/platform/chrome/cros_ec_proto_test.c:1645:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
drivers/platform/chrome/cros_ec_proto_test.c:1668:40: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Link: https://lore.kernel.org/r/ZgMaDl/of8YC445S@neat
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Follow the advice in Documentation/filesystems/sysfs.rst:
show() should only use sysfs_emit() or sysfs_emit_at() when formatting
the value to be returned to user space.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Link: https://lore.kernel.org/r/20240314052828.186924-1-aichao@kylinos.cn
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Forcing a gpiochip to have a fixed base number now leads to a warning
message. Remove the need to do so by using the offset value of the
gpiochip.
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Doug Berger <opendmb@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Tested-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20240423184605.2094376-1-opendmb@gmail.com
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
The recent backmerge from drm-next to drm-xe-next brought with it
some silent unexpected results. One code snippet was added twice
and a partial revert had merge errors. Fix that up to
reinstate the affected code as it was before the backmerge.
v2:
- Commit log message rewording (Lucas DeMarchi)
Fixes: 79790b6818 ("Merge drm/drm-next into drm-xe-next")
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240423121114.39325-1-thomas.hellstrom@linux.intel.com
The computations carried out by fair_share_throttle() for each trip
point include at least one redundant integer division which introduces
superfluous rounding errors. Also the multiplications by 100 in it are
not really necessary and can be eliminated.
Rearrange fair_share_throttle() to carry out only one integer division per
trip and only as many integer multiplications as necessary and rename one
variable in it (while at it).
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
In principle, the Fair Share governor should take trip hysteresis
into account. After all, once a trip has been crossed on the way up,
mitigation is still needed until it is crossed on the way down.
For this reason, make it use trip thresholds that are computed by
the core when trips are crossed, so as to apply mitigations if the
zone temperature is in a hysteresis rage of one or more trips that
were crossed on the way up, but have not been crossed on the way
down yet.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
The Fair Share governor tries very hard to be stateless and so it
calls get_trip_level() from fair_share_throttle() every time, even
though the number produced by this function for all of the trips
during a given thermal zone update is actually the same. Since
get_trip_level() walks all of the trips in the thermal zone every
time it is called, doing this may generate quite a bit of completely
useless overhead.
For this reason, make the governor use the new .manage() callback
instead of .throttle() which allows it to call get_trip_level() just
once and use the value computed by it to handle all of the trips.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Do some assorted cleanups in thermal_zone_trip_update():
* Compute the trend value upfront.
* Move old_target definition to the block where it is used.
* Adjust white space around diagnostic messages and locking.
* Use suitable field formatting in a message to avoid an explicit
cast to int.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
In principle, the Step-Wise governor should take trip hysteresis into
account. After all, once a trip has been crossed on the way up,
mitigation is still needed until it is crossed on the way down.
For this reason, make it use trip thresholds that are computed by
the core when trips are crossed, so as to apply mitigations in the
hysteresis rages of trips that were crossed on the way up, but have
not been crossed on the way down yet.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Make the Step-Wise governor use the new .manage() callback instead of
.throttle().
Even though using .throttle() is not particularly problematic for the
Step-Wise governor, using .manage() instead still allows it to reduce
overhead by updating all of the cooling devices once after setting
target values for all of the thermal instances.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Remove the now unneeded check for ctl_table_size; it is safe
to do so as sysctl_set_perm_empty_ctl_header() does not access the
ctl_table member anymore.
This also makes the element of sysctl_mount_point unnecessary, so drop
it at the same time.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Move the SYSCTL_TABLE_TYPE_{DEFAULT,PERMANENTLY_EMPTY} enums from
ctl_table to ctl_table_header.
Removing the mutable member is necessary to constify static instances
of struct ctl_table.
Move the initialization of the sysctl_mount_point type into
init_header() where all the other header fields are also initialized.
As a side-effect the memory usage of the sysctl core is reduced.
Each ctl_table_header instance can manage multiple ctl_table instances
and is only allocated when the table is actually registered.
This saves 8 bytes of memory per ctl_table on 64bit, 4 due to the enum
field itself and 4 due to padding.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
It is used only twice and those callers are simpler with
sysctl_is_perm_empty_ctl_header().
So use this sibling function.
This is part of an effort to constify definition of struct ctl_table.
For this effort the mutable member 'type' is moved from
struct ctl_table to struct ctl_table_header.
Unifying the macros sysctl_is_perm_empty_ctl_* makes this easier.
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
The permissions callback should not modify the ctl_table. Enforce this
expectation via the typesystem. This is a step to put "struct ctl_table"
into .rodata throughout the kernel.
The patch was created with the following coccinelle script:
@@
identifier func, head, ctl;
@@
int func(
struct ctl_table_header *head,
- struct ctl_table *ctl)
+ const struct ctl_table *ctl)
{ ... }
(insert_entry() from fs/proc/proc_sysctl.c is a false-positive)
No additional occurrences of '.permissions =' were found after a
tree-wide search for places missed by the conccinelle script.
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
Remove the 'table' argument from set_ownership as it is never used. This
change is a step towards putting "struct ctl_table" into .rodata and
eventually having sysctl core only use "const struct ctl_table".
The patch was created with the following coccinelle script:
@@
identifier func, head, table, uid, gid;
@@
void func(
struct ctl_table_header *head,
- struct ctl_table *table,
kuid_t *uid, kgid_t *gid)
{ ... }
No additional occurrences of 'set_ownership' were found after doing a
tree-wide search.
Reviewed-by: Joel Granados <j.granados@samsung.com>
Signed-off-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Joel Granados <j.granados@samsung.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel element from bpf_syscall_table.
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Joel Granados <j.granados@samsung.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel element from kern_delayacct_table
Signed-off-by: Joel Granados <j.granados@samsung.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel element from kprobe_sysclts
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Joel Granados <j.granados@samsung.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
rm sentinel element from printk_sysctls
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
rm sentinel element from ctl_table arrays
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Valentin Schneider <vschneid@redhat.com>
Reviewed-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Joel Granados <j.granados@samsung.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel element from seccomp_sysctl_table.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Joel Granados <j.granados@samsung.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel element from time_sysctl
Signed-off-by: Joel Granados <j.granados@samsung.com>
This commit comes at the tail end of a greater effort to remove the
empty elements at the end of the ctl_table arrays (sentinels) which
will reduce the overall build time size of the kernel and run time
memory bloat by ~64 bytes per sentinel (further information Link :
https://lore.kernel.org/all/ZO5Yx5JFogGi%2FcBo@bombadil.infradead.org/)
Remove sentinel elements from ftrace_sysctls and user_event_sysctls
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Joel Granados <j.granados@samsung.com>
