Commit graph

1,308,922 commits

Author SHA1 Message Date
Jonathan Cameron
e7ec4791f9 perf/arm-cci: Assign parents for event_source device
Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-19-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:30 +01:00
Jonathan Cameron
1919bd8e0b perf/alibaba_uncore: Assign parents for event_source device
Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-18-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:30 +01:00
Jonathan Cameron
7bf75431a9 perf/arm_pmu: Assign parents for event_source devices
Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240412161057.14099-17-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:30 +01:00
Jonathan Cameron
1d194ab857 perf/imx_ddr: Assign parents for event_source devices
Currently all this device appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Frank Li <Frank.li@nxp.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-16-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:30 +01:00
Jonathan Cameron
6148865dd5 perf/qcom: Assign parents for event_source devices
Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the platform devices.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Andy Gross <agross@kernel.org>
Cc: Bjorn Andersson <andersson@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-15-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:30 +01:00
Jonathan Cameron
556da13434 Documentation: qcom-pmu: Use /sys/bus/event_source/devices paths
To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-14-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:30 +01:00
Jonathan Cameron
50650e5f31 perf/riscv: Assign parents for event_source devices
Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the appropriate platform devices.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Atish Patra <atishp@atishpatra.org>
CC: Anup Patel <anup@brainfault.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-13-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:29 +01:00
Jonathan Cameron
ecb79c21c1 perf/thunderx2: Assign parents for event_source devices
Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Robert Richter <rric@kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-12-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:29 +01:00
Jonathan Cameron
90b4a1a927 Documentation: thunderx2-pmu: Use /sys/bus/event_source/devices paths
To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-11-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:29 +01:00
Jonathan Cameron
89e34f8bee perf/xgene: Assign parents for event_source devices
Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the hardware related struct device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Cc: Khuong Dinh <khuong@os.amperecomputing.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-10-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:29 +01:00
Jonathan Cameron
867ba6d204 Documentation: xgene-pmu: Use /sys/bus/event_source/devices paths
To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.

Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-9-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:29 +01:00
Jonathan Cameron
3a1bb75ebc perf/arm_cspmu: Assign parents for event_source devices
Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-8-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:29 +01:00
Jonathan Cameron
1b7718fcc3 perf/amlogic: Assign parents for event_source devices
Currently all these devices appear directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parents to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Reviewed-by: Jiucheng Xu <jiucheng.xu@amlogic.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-7-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:29 +01:00
Jonathan Cameron
3d957de12c perf/hisi-hns3: Assign parents for event_source device
Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the PCI device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-6-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:29 +01:00
Jonathan Cameron
eff6af5313 Documentation: hns-pmu: Use /sys/bus/event_source/devices paths
To allow setting an appropriate parent for the struct pmu device
remove existing references to /sys/devices/ path.

Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-5-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:28 +01:00
Jonathan Cameron
16d417f6c4 perf/hisi-uncore: Assign parents for event_source devices
Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the platform device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-4-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:28 +01:00
Jonathan Cameron
d0412b6ecb Documentation: hisi-pmu: Drop reference to /sys/devices path
Having assigned a parent to the device, the suggested path is
no longer valid.  As /sys/bus/event_sources based path is also
provided, simply drop mention of alternative.

Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-3-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:28 +01:00
Jonathan Cameron
1fb8950417 perf/hisi-pcie: Assign parent for event_source device
Currently the PMU device appears directly under /sys/devices/
Only root busses should appear there, so instead assign the pmu->dev
parent to be the PCI device.

Link: https://lore.kernel.org/linux-cxl/ZCLI9A40PJsyqAmq@kroah.com/
Reviewed-by: Yicong Yang <yangyicong@hisilicon.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240412161057.14099-2-Jonathan.Cameron@huawei.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 15:59:28 +01:00
Matt Roper
62422b7be4 drm/xe: Define all possible engines in media IP descriptors
Rather than trying to identify exactly which engines are available on
each platform in the IP descriptor, just include the list of all media
engines that the IP could theoretically support (i.e., 8 VCS + 4 VECS).
We still rely on the media fuse registers to tell us which specific
engine instances are actually present on a given platform, so there
shouldn't be any functional change.  This will help prevent mistakes
with engine numbering (for example ambiguity about whether the 2nd VCS
engine on a platform with exactly two engines is numbered "VCS1" or
"VCS2") and will also future-proof the code a bit more in case new SKUs
or platform refreshes extend the engine list in the future.

Note that the media fuse register technically has an 8-bit field for
VECS engine presence starting on Xe2.  However there's still no MMIO
register range reserved for VE engines above VECS3, so VE0-VE3 is still
consider the "maximum" VE engine mask that the driver can support for
now.

Bspec: 52614, 52615, 62567
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417152621.3357990-2-matthew.d.roper@intel.com
2024-04-19 07:26:28 -07:00
Imre Deak
e78b8e8f0c drm/i915/dp_mst: Enable HBLANK expansion quirk for UHBR rates
Enabling the 5k@60Hz uncompressed mode on the MediaTek/Dell U3224KBA
monitor results in a blank screen, at least on MTL platforms on UHBR
link rates with some (<30) uncompressed bpp values. Enabling compression
fixes the problem, so do that for now. Windows enables DSC always if the
sink supports it and forcing it to enable the mode without compression
leads to the same problem above (which suggests a panel issue with
uncompressed mode).

The same 5k mode on non-UHBR link rates is not affected and lower
resolution modes are not affected either. The problem is similar to the
one fixed by the HBLANK expansion quirk on Synaptics hubs, with the
difference that the problematic mode has a longer HBLANK duration. Also
the monitor doesn't report supporting HBLANK expansion; either its
internal MST hub does the expansion internally - similarly to the
Synaptics hub - or the issue has another root cause, but still related
to the mode's short HBLANK duration. Enable the quirk for the monitor
adjusting the detection for the above differences.

v2: Rebase on drm_dp_128132b_supported() change.

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417142217.457902-1-imre.deak@intel.com
2024-04-19 17:20:53 +03:00
Imre Deak
427c70302b drm/i915/dp_mst: Make HBLANK expansion quirk work for logical ports
The DPCD OUI of the logical port on a Dell UHBR monitor - on which the
AUX device is used to enable DSC - is all 0. To detect if the HBLANK
expansion quirk is required for this monitor use the OUI of the port's
parent instead.

Since in the above case the DPCD of both the logical port and the parent
port reports being a sink device (vs. branch device) type, read the
proper sink/branch OUI based on the DPCD device type.

This is required by a follow-up patch enabling the quirk for the above
Dell monitor.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-11-imre.deak@intel.com
2024-04-19 17:20:53 +03:00
Imre Deak
93cb4094a7 drm/dp_mst: Add drm_dp_mst_aux_for_parent()
Add a function to get the AUX device of the parent of an MST port, used
by a follow-up i915 patch in the patchset.

v2: Move drm_dp_mst_aux_for_parent() forward declaration to this patch
    (Ankit)

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-10-imre.deak@intel.com
2024-04-19 17:20:53 +03:00
Imre Deak
ca5d9d78f0 drm/dp_mst: Factor out drm_dp_mst_port_is_logical()
Factor out a function to check if an MST port is logical, used by a
follow-up i915 patch in the patchset.

v2: Move drm_dp_mst_aux_for_parent() forward declaration to the next
    patch. (Ankit)

Cc: Lyude Paul <lyude@redhat.com>
Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-9-imre.deak@intel.com
2024-04-19 17:20:53 +03:00
Imre Deak
8976bf1877 drm/dp: Add drm_dp_128b132b_supported()
Factor out a function to check for 128b/132b channel coding support used
by a follow-up patch in the patchset.

v2: s/drm_dp_uhbr_channel_coding_supported()/drm_dp128b132b_supported()
    (Jani)

Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240417141936.457796-1-imre.deak@intel.com
2024-04-19 17:20:53 +03:00
Imre Deak
0f1ceeec1b drm/i915/dp_mst: Sanitize calculating the DSC DPT bpp limit
Instead of checking each compressed bpp value against the maximum
DSC/DPT bpp, simplify things by calculating the maximum bpp upfront and
limiting the range of bpps looped over using this maximum.

While at it add a comment about the origin of the DSC/DPT bpp limit.

Bspec: 49259, 68912

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-7-imre.deak@intel.com
2024-04-19 17:20:53 +03:00
Imre Deak
e54cc6deec drm/i915/dp_mst: Account with the DSC DPT bpp limit on MTL
The DPT/DSC bpp limit should be accounted for on MTL platforms as well,
do so.

Bspec: 49259

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-6-imre.deak@intel.com
2024-04-19 17:20:53 +03:00
Imre Deak
fd13841d8b drm/i915/dp_mst: Account for channel coding efficiency in the DSC DPT bpp limit
The DSC DPT interface BW limit check should take into account the link
clock's (aka DDI clock in bspec) channel coding efficiency overhead.
Bspec suggests that the FEC overhead needs to be applied, however HW
people claim this isn't the case, nor is any overhead applicable.

However based on testing various 5k/6k modes both on the DELL U3224KBA
monitor and the Unigraf UCD-500 CTS test device, both the channel coding
efficiency (which includes the FEC overhead) and an additional 3%
overhead must be accounted for to get these modes working.

Bspec: 49259

v2:
- Apply an additional 3% overhead, add a commit log and code comment
  about these overheads and the relation to the Bspec BW limit formula.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-5-imre.deak@intel.com
2024-04-19 17:20:44 +03:00
Peng Fan
eb524cb651 pinctrl: Implementation of the generic scmi-pinctrl driver
scmi-pinctrl driver implements pinctrl driver interface and using
SCMI protocol to redirect messages from pinctrl subsystem SDK to
SCMI platform firmware, which does the changes in HW.

Co-developed-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Andy Shevchenko <andy@kernel.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240418-pinctrl-scmi-v11-4-499dca9864a7@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-04-19 15:17:37 +01:00
Peng Fan
2145af01b9 firmware: arm_scmi: Add basic support for SCMI v3.2 pincontrol protocol
Add basic implementation of the SCMI v3.2 pincontrol protocol.

Co-developed-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Signed-off-by: Oleksii Moisieiev <oleksii_moisieiev@epam.com>
Co-developed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240418-pinctrl-scmi-v11-3-499dca9864a7@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-04-19 15:17:37 +01:00
Peng Fan
1b403075e6 dt-bindings: firmware: Support SCMI pinctrl protocol
Add SCMI v3.2 pinctrl protocol bindings with an example.

Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240418-pinctrl-scmi-v11-2-499dca9864a7@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-04-19 15:17:37 +01:00
Peng Fan
4869b5cc96 firmware: arm_scmi: Introduce get_max_msg_size() helper/accessor
When the agent is sending data to the SCMI platform, the drivers in the
agent could check the maximum message size supported to avoid potential
protocol buffer overflow.

Introduce the helper/accessor function get_max_msg_size() for the same.

Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/20240418-pinctrl-scmi-v11-1-499dca9864a7@nxp.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2024-04-19 15:17:37 +01:00
Jiapeng Chong
8294d49adb block/mq-deadline: Remove some unused functions
These functions are defined in the mq-deadline.c file, but not called
elsewhere, so delete these unused functions.

block/mq-deadline.c:134:1: warning: unused function 'deadline_earlier_request'.
block/mq-deadline.c:148:1: warning: unused function 'deadline_latter_request'.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Closes: https://bugzilla.openanolis.cn/show_bug.cgi?id=8803
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240419025610.34298-1-jiapeng.chong@linux.alibaba.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-19 08:10:36 -06:00
Greg Kroah-Hartman
7a9a304069 USB-serial device ids for 6.9-rc5
Here are some new modem device ids for 6.9-rc5.
 
 All have been in linux-next with no reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYKAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCZiJlDQAKCRALxc3C7H1l
 CHssAQDRloOpuKCJJjVrr8PDdLSh9IkCSX82ashJIys9lEHXEAEAhBGJAucsTMBX
 gvszixRlGe6nfO9M5JTUy8+sBMEZyAw=
 =1mFa
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Johan writes:

USB-serial device ids for 6.9-rc5

Here are some new modem device ids for 6.9-rc5.

All have been in linux-next with no reported issues.

* tag 'usb-serial-6.9-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: option: add Telit FN920C04 rmnet compositions
  USB: serial: option: add Rolling RW101-GL and RW135-GL support
  USB: serial: option: add Lonsung U8300/U9300 product
  USB: serial: option: add support for Fibocom FM650/FG650
  USB: serial: option: support Quectel EM060K sub-models
  USB: serial: option: add Fibocom FM135-GL variants
2024-04-19 16:07:18 +02:00
Li Nan
01bc4fda9e blk-iocost: do not WARN if iocg was already offlined
In iocg_pay_debt(), warn is triggered if 'active_list' is empty, which
is intended to confirm iocg is active when it has debt. However, warn
can be triggered during a blkcg or disk removal, if iocg_waitq_timer_fn()
is run at that time:

  WARNING: CPU: 0 PID: 2344971 at block/blk-iocost.c:1402 iocg_pay_debt+0x14c/0x190
  Call trace:
  iocg_pay_debt+0x14c/0x190
  iocg_kick_waitq+0x438/0x4c0
  iocg_waitq_timer_fn+0xd8/0x130
  __run_hrtimer+0x144/0x45c
  __hrtimer_run_queues+0x16c/0x244
  hrtimer_interrupt+0x2cc/0x7b0

The warn in this situation is meaningless. Since this iocg is being
removed, the state of the 'active_list' is irrelevant, and 'waitq_timer'
is canceled after removing 'active_list' in ioc_pd_free(), which ensures
iocg is freed after iocg_waitq_timer_fn() returns.

Therefore, add the check if iocg was already offlined to avoid warn
when removing a blkcg or disk.

Signed-off-by: Li Nan <linan122@huawei.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20240419093257.3004211-1-linan666@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-04-19 08:06:24 -06:00
Imre Deak
1ff65bf8ff drm/i915/dp_mst: Fix BW limit check when calculating DSC DPT bpp
The DSC DPT bpp limit check should only fail if the available DPT BW is
less than the required BW, fix the check accordingly.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-4-imre.deak@intel.com
2024-04-19 17:05:36 +03:00
Imre Deak
854ff3d9b8 drm/i915/dp_mst: Fix symbol clock when calculating the DSC DPT bpp limit
The expected link symbol clock unit when calculating the DSC DPT bpp
limit is kSymbols/sec, aligning with the dotclock's kPixels/sec unit
based on the crtc clock. As opposed to this port_clock is used - which
has a 10 kbits/sec unit - with the resulting symbol clock in 10
kSymbols/sec units (disregarding the rounding error for the 13.5Gbps
rate). Fix the calculation using the expected 10x factor.

Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-3-imre.deak@intel.com
2024-04-19 17:05:36 +03:00
Imre Deak
f1d6aec41f drm/i915/dp: Fix DSC line buffer depth programming
Fix the calculation of the DSC line buffer depth. This is limited both
by the source's and sink's maximum line buffer depth, but the former one
was not taken into account. On all Intel platform's the source's maximum
buffer depth is 13, so the overall limit is simply the minimum of the
source/sink's limit, regardless of the DSC version.

This leaves the DSI DSC line buffer depth calculation as-is, trusting
VBT.

On DSC version 1.2 for sinks reporting a maximum line buffer depth of 16
the line buffer depth was incorrectly programmed as 0, leading to a
corruption in color gradients / lines on the decompressed screen image.

Cc: dri-devel@lists.freedesktop.org
Reviewed-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Manasi Navare <navaremanasi@chromium.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240416221010.376865-2-imre.deak@intel.com
2024-04-19 17:05:35 +03:00
Besar Wicaksono
f4d9d9dcc7 arm64: Add Neoverse-V2 part
Add the part number and MIDR for Neoverse-V2

Signed-off-by: Besar Wicaksono <bwicaksono@nvidia.com>
Reviewed-by: James Clark <james.clark@arm.com>
Link: https://lore.kernel.org/r/20240109192310.16234-2-bwicaksono@nvidia.com
Signed-off-by: Will Deacon <will@kernel.org>
2024-04-19 14:43:54 +01:00
Rafael J. Wysocki
5c897a9a12 Merge back earlier thermal control material for v6.10. 2024-04-19 15:17:21 +02:00
Vinod Govindapillai
aaba7a95dd drm/i915/display: force qgv check after the hw state readout
The current intel_bw_atomic_check do not check the possbility
of a sagv configuration change after the hw state readout.
Hence cannot update the sagv configuration until some other
relevant changes like data rates, number of planes etc. happen.
Introduce a flag to force qgv check in such cases.

Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-7-vinod.govindapillai@intel.com
2024-04-19 16:11:42 +03:00
Stanislav Lisovskiy
1e9e4be8d6 drm/i915/display: handle systems with duplicate psf gv points
There could be multiple qgv and psf gv points with similar values.
Apparently pcode's handling of psf and qgv points are different. For
qgv case, pcode sets whatever is asked by the driver. But in case
of psf gv points, it compares the bw from points before setting the
mask. This can cause problems in scenarios where we have to disable
sagv by setting the highest bw point and there could be multiple
points with highest bw. So to set the maximum psf gv point, find
out all the points with the highest bw and set all together.

v1: - use the same treatment to qgv points as well (Vinod)

v2: - pcode confirms that for qgv points, it sets whatever the
      driver sets (Vinod)

Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-6-vinod.govindapillai@intel.com
2024-04-19 16:11:31 +03:00
Stanislav Lisovskiy
9299cde973 drm/i915/display: Disable SAGV on bw init, to force QGV point recalculation
Problem is that on some platforms, we do get QGV point mask in wrong
state on boot. However driver assumes it is set to 0
(i.e all points allowed), however in reality we might get them all
restricted, causing issues.
Lets disable SAGV initially to force proper QGV point state.
If more QGV points are available, driver will recalculate and update
those then after next commit.

v2: - Added trace to see which QGV/PSF GV point is used when SAGV is
      disabled.
v3: - Move force disable function to intel_bw_init in order to initialize
      bw state as well, so that hw/sw are immediately in sync after init.
v4: - Don't try sending PCode request, seems like it is not possible at
      intel_bw_init, however assigning bw->state to be restricted as if
      SAGV is off, still forces driveer to send PCode request anyway on
      next modeset, so the solution still works.
      However we still need to address the case, when no display is
      connected, which anyway requires much more changes.

v5: - Put PCode request back and apply temporary hack to make the
      request succeed(in case if there 2 PSF GV points with same BW, PCode
      accepts only if both points are restricted/unrestricted same time)
    - Fix argument sequence for adl_qgv_bw(Ville Syrjälä)

v6: - Fix wrong platform checks, not to break everything else.

v7: - Split the handling of quplicate QGV/PSF GV points (Vinod)
      Restrict force disable to display version below 14 (Vinod)

v8: - Simplify icl_force_disable_sagv (Vinod)

Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-5-vinod.govindapillai@intel.com
2024-04-19 16:11:31 +03:00
Vinod Govindapillai
f09f95177d drm/i915/display: extract code to prepare qgv points mask
Extract the code to prepare the QGV points mask as per the
format expected by the pcode as this could be utlized from
multiple points.

Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-4-vinod.govindapillai@intel.com
2024-04-19 16:11:31 +03:00
Stanislav Lisovskiy
193caff136 drm/i915/display: Extract code required to calculate max qgv/psf gv point
We need that in order to force disable SAGV in next patch.
Also it is beneficial to separate that code, as in majority cases,
when SAGV is enabled, we don't even need those calculations.
Also we probably need to determine max PSF GV point as well, however
currently we don't do that when we disable SAGV, which might be
actually causing some issues in that case.

v2: - Introduce helper adl_qgv_bw(counterpart to adl_psf_bw)
      (Ville Syrjälä)
    - Don't restrict psf gv points for SAGV disable case
      (Ville Syrjälä)
v3: - Update icl_max_bw_qgv_point_mask to return max qgv point
      mask (Vinod)
v4: - Minor changes in icl_find_qgv_points (Vinod)
v5: - use max_bw_point instead of max_bw_point_mask (stan)

Reviewed-by: Jouni Högander <jouni.hogander@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-3-vinod.govindapillai@intel.com
2024-04-19 16:11:24 +03:00
Rafael J. Wysocki
b552f63cd4 thermal/debugfs: Add missing count increment to thermal_debug_tz_trip_up()
The count field in struct trip_stats, representing the number of times
the zone temperature was above the trip point, needs to be incremented
in thermal_debug_tz_trip_up(), for two reasons.

First, if a trip point is crossed on the way up for the first time,
thermal_debug_update_temp() called from update_temperature() does
not see it because it has not been added to trips_crossed[] array
in the thermal zone's struct tz_debugfs object yet.  Therefore, when
thermal_debug_tz_trip_up() is called after that, the trip point's
count value is 0, and the attempt to divide by it during the average
temperature computation leads to a divide error which causes the kernel
to crash.  Setting the count to 1 before the division by incrementing it
fixes this problem.

Second, if a trip point is crossed on the way up, but it has been
crossed on the way up already before, its count value needs to be
incremented to make a record of the fact that the zone temperature is
above the trip now.  Without doing that, if the mitigations applied
after crossing the trip cause the zone temperature to drop below its
threshold, the count will not be updated for this episode at all and
the average temperature in the trip statistics record will be somewhat
higher than it should be.

Fixes: 7ef01f228c ("thermal/debugfs: Add thermal debugfs information for mitigation episodes")
Cc :6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2024-04-19 15:08:19 +02:00
Paolo Bonzini
a96cb3bf39 Merge x86 bugfixes from Linux 6.9-rc3
Pull fix for SEV-SNP late disable bugs.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2024-04-19 09:02:22 -04:00
Stanislav Lisovskiy
9236368194 drm/i915/display: Add meaningful traces for QGV point info error handling
For debug purposes we need those - error path won't flood the log,
however there has been already numerous cases, when due to lack
of debugs, we couldn't immediately tell what was the problem on
customer machine, which slowed down the investigation, requiring
to get access to target device and adding those traces manually.

v2: - Make the debug more generic and move it to intel_dram_detect
      (Gustavo Sousa)
v3: - Use %u for unsigned variable in debug prints (Gustavo)

Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405113533.338553-2-vinod.govindapillai@intel.com
2024-04-19 15:45:13 +03:00
David Bauer
f58f45c1e5 vxlan: drop packets from invalid src-address
The VXLAN driver currently does not check if the inner layer2
source-address is valid.

In case source-address snooping/learning is enabled, a entry in the FDB
for the invalid address is created with the layer3 address of the tunnel
endpoint.

If the frame happens to have a non-unicast address set, all this
non-unicast traffic is subsequently not flooded to the tunnel network
but sent to the learnt host in the FDB. To make matters worse, this FDB
entry does not expire.

Apply the same filtering for packets as it is done for bridges. This not
only drops these invalid packets but avoids them from being learnt into
the FDB.

Fixes: d342894c5d ("vxlan: virtual extensible lan")
Suggested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David Bauer <mail@david-bauer.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-19 12:54:33 +01:00
David S. Miller
4cad4efa6e Merge branch 'net-neigh-rcu'
Eric Dumazet says:

====================
neighbour: convert neigh_dump_info() to RCU

Remove RTNL requirement for "ip neighbour show" command.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-19 12:39:20 +01:00
Eric Dumazet
ba0f780694 neighbour: no longer hold RTNL in neigh_dump_info()
neigh_dump_table() is already relying on RCU protection.

pneigh_dump_table() is using its own protection (tbl->lock)

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-19 12:39:20 +01:00