There is an unbalanced pm_runtime_enable() in etm4_probe_platform_dev()
when etm4_probe() fails. This problem can be observed via the coresight
etm4 module's (load -> unload -> load) sequence when etm4_probe() fails
in etm4_probe_platform_dev().
[ 63.379943] coresight-etm4x 7040000.etm: Unbalanced pm_runtime_enable!
[ 63.393630] coresight-etm4x 7140000.etm: Unbalanced pm_runtime_enable!
[ 63.407455] coresight-etm4x 7240000.etm: Unbalanced pm_runtime_enable!
[ 63.420983] coresight-etm4x 7340000.etm: Unbalanced pm_runtime_enable!
[ 63.420999] coresight-etm4x 7440000.etm: Unbalanced pm_runtime_enable!
[ 63.441209] coresight-etm4x 7540000.etm: Unbalanced pm_runtime_enable!
[ 63.454689] coresight-etm4x 7640000.etm: Unbalanced pm_runtime_enable!
[ 63.474982] coresight-etm4x 7740000.etm: Unbalanced pm_runtime_enable!
This fixes the above problem - with an explicit pm_runtime_disable() call
when etm4_probe() fails during etm4_probe_platform_dev().
Cc: Lorenzo Pieralisi <lpieralisi@kernel.org>
Cc: Hanjun Guo <guohanjun@huawei.com>
Cc: Sudeep Holla <sudeep.holla@arm.com>
Cc: "Rafael J. Wysocki" <rafael@kernel.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Suzuki K Poulose <suzuki.poulose@arm.com>
Cc: Mike Leach <mike.leach@linaro.org>
Cc: James Clark <james.clark@arm.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-acpi@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: coresight@lists.linaro.org
Fixes: 5214b56358 ("coresight: etm4x: Add support for sysreg only devices")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240314055843.2625883-2-anshuman.khandual@arm.com
Petr Machata says:
====================
selftests: Assortment of fixes
This is a loose follow-up to the Kernel CI patchset posted recently. It
contains various fixes that were supposed to be part of said patchset, but
didn't fit due to its size. The latter 4 patches were written independently
of the CI effort, but again didn't fit in their intended patchsets.
- Patch #1 unifies code of two very similar looking functions, busywait()
and slowwait().
- Patch #2 adds sanity checks around the setting of NETIFS, which carries
list of interfaces to run on.
- Patch #3 changes bail_on_lldpad() to SKIP instead of FAILing.
- Patches #4 to #7 fix issues in selftests.
- Patches #8 to #10 add topology diagrams to several selftests.
This should have been part of the mlxsw leg of NH group stats patches,
but again, it did not fit in due to size.
====================
Link: https://lore.kernel.org/r/cover.1712940759.git.petrm@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test lacks a topology diagram, making the setup not obvious.
Add one.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test lacks a topology diagram, making the setup not obvious.
Add one.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This test lacks a topology diagram, making the setup not obvious.
Add one.
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The ethtool dump includes the lanes parameter only when the port is up.
Therefore, the ethtool_lanes.sh test waits for ports to come before testing
the lanes parameter.
In some cases, the test considers the port as up, but the lanes parameter
is not yet dumped although assumed to be, resulting in ethtool_lanes.sh
test failure.
To avoid that, ensure that the lanes parameter is indeed dumped by waiting
for it explicitly, before preforming the test cases.
Signed-off-by: Danielle Ratson <danieller@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The tests use the constant TC_HIT_TIMEOUT when waiting on the counter
values. However it does not include tc_common.sh where the counter is
specified. The test has been robust in our testing, which means the counter
is bumped quickly enough that the updated value is available already on the
first iteration. Nevertheless it's not correct. Include tc_common.sh as
appropriate.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some log_test calls are done in a loop, and lead to the same log output.
This might prove tricky to deduplicate for automated tools. Instead, roll
the unique information from log_info to log_test, and drop the log_info.
This also leads to more compact and clearer output.
This change prompts rewording the messages so that they are not excessively
long.
Some check_err messages do not indicate what the issue actually is, so
reword them to say it's a "ping with", like is the case in some other
instances in this test.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When rx-pktsNtoM reports a range that involves very low-valued range, such
as 0-64, the calculated length of the packet will be -4, because FCS is
subtracted from the value. mausezahn then confuses the value for an option
and bails out. As a result, the test dumps many mausezahn error messages.
Instead, cap the value at 0. mausezahn will use an appropriate minimum
packet length.
Cc: Vladimir Oltean <vladimir.oltean@nxp.com>
Cc: Tobias Waldekranz <tobias@waldekranz.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
$ksft_skip is used to mark selftests that have tooling issues. The fact
that LLDPad is running, but shouldn't, is one such issue. Therefore have
bail_on_lldpad() bail with $ksft_skip.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The variable should contain at least NUM_NETIFS interfaces, stored
as keys named "p$i", for i in `seq $NUM_NETIFS`.
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Bodies of busywait() and slowwait() functions are almost identical. Extract
the common code into a helper, loopy_wait, and convert busywait() and
slowwait() into trivial wrappers.
Moreover, the fact that slowwait() uses seconds for units is really not
intuitive, and the comment does not help much. Instead make the unit part
of the name of the argument to further clarify what units are expected.
Cc: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Benjamin Poirier <bpoirier@nvidia.com>
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/11e06f4cce041436bd63fb24361f3cee06bd2d59.1712756364.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/bc6b1caafa977346b33c1040d0f8e616bc0457bf.1712756364.git.u.kleine-koenig@pengutronix.de
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
"in-ports" and "out-ports" are defined by graph schema, so defining its
type is redundant.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/20240325104007.30723-1-krzysztof.kozlowski@linaro.org
The rcu_gp_slow_register/unregister() is only useful in tests where
torture_type=rcu, so this commit therefore generates ->gp_slow_register()
and ->gp_slow_unregister() function pointers in the rcu_torture_ops
structure, and slows grace periods only when these function pointers
exist.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Currently, the torture.sh --do-kvfree testing is hard-coded to ten
minutes, ignoring the --duration argument. This commit therefore scales
this test duration the same as for the rcutorture tests.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
For these rcu_torture_ops structure's objects defined by using static,
if the value of the function pointer in its member is not set, the default
value will be NULL, this commit therefore remove the pre-existing
initialization of function pointers to NULL.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
This commit make rcu-tasks related rcutorture test support rcu-tasks
gp state printing when the writer stall occurs or the at the end of
rcutorture test, and generate rcu_ops->get_gp_data() operation to
simplify the acquisition of gp state for different types of rcutorture
tests.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Despite there being a cur_ops->gp_kthread_dbg(), rcu_torture_writer()
unconditionally invokes vanilla RCU's show_rcu_gp_kthreads(). This is not
at all helpful when some other flavor of RCU is being tested. This commit
therefore makes rcu_torture_writer() invoke cur_ops->gp_kthread_dbg()
for RCU implementations providing this function.
Signed-off-by: Zqiang <qiang.zhang1211@gmail.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Currently, the rcu_torture_pipe_update_one() writes the value (i + 1)
to rp->rtort_pipe_count, then immediately re-reads it in order to compare
it to RCU_TORTURE_PIPE_LEN. This re-read is pointless because no other
update to rp->rtort_pipe_count can occur at this point. This commit
therefore instead re-uses the (i + 1) value stored in the comparison
instead of re-reading rp->rtort_pipe_count.
Signed-off-by: linke li <lilinke99@qq.com>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The "pipe_count > RCU_TORTURE_PIPE_LEN" check has a comment saying "Should
not happen, but...". This is only true when testing an RCU whose grace
periods are always long enough. This commit therefore fixes this comment.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wi7rJ-eGq+xaxVfzFEgbL9tdf6Kc8Z89rCpfcQOKm74Tw@mail.gmail.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
The rcu_torture_pipe_update_one() cannot run concurrently with any updates
of ->rtort_pipe_count, so this commit removes the extraneous READ_ONCE()
from the read from this field.
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Closes: https://lore.kernel.org/lkml/CAHk-=wiX_zF5Mpt8kUm_LFQpYY-mshrXJPOe+wKNwiVhEUcU9g@mail.gmail.com/
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Reviewed-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Johan Hovold reported that removing the legacy ntfs driver broke boot
for him since his fstab uses the legacy ntfs driver to access firmware
from the original Windows partition.
Use ntfs3 as an alias for legacy ntfs if CONFIG_NTFS_FS is selected.
This is similar to how ext3 is treated.
Link: https://lore.kernel.org/r/Zf2zPf5TO5oYt3I3@hovoldconsulting.com
Link: https://lore.kernel.org/r/20240325-hinkriegen-zuziehen-d7e2c490427a@brauner
Fixes: 7ffa8f3d30 ("fs: Remove NTFS classic")
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Convert mt753x to provide its own phylink MAC operations, thus avoiding
the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/E1rvIco-006bQu-Fq@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert lantiq_gswip to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c. For lantiq_gswip, it means
we end up with a common instance of phylink MAC operations that are
shared between the different variants, rather than having duplicated
initialisers in dsa_switch_ops.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://lore.kernel.org/r/E1rvIcj-006bQo-B3@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert qca8k to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIce-006bQi-58@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert ar9331 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIcZ-006bQc-0W@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Convert sja1105 to provide its own phylink MAC operations, thus
avoiding the shim layer in DSA's port.c
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Link: https://lore.kernel.org/r/E1rvIcT-006bQW-S3@rmk-PC.armlinux.org.uk
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
This is less verbose.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
This series changes the directory update code to retain the ILOCK on all
files involved in a rename until the end of the operation. The upcoming
parent pointers patchset applies parent pointers in a separate chained
update from the actual directory update, which is why it is now
necessary to keep the ILOCK instead of dropping it after the first
transaction in the chain.
As a side effect, we no longer need to hold the IOLOCK during an rmapbt
scan of inodes to serialize the scan with ongoing directory updates.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23VAAKCRBKO3ySh0YR
phqUAP9ACvKuSe7BN1PYvnSTWJ27Kfzy1u9AnMivsKjaWRW2AQEAiYsDs2La+B2m
Z7pdfAX6U6id5D4F9zGm1nIu08ChCQs=
=/hm0
-----END PGP SIGNATURE-----
Merge tag 'retain-ilock-during-dir-ops-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: retain ILOCK during directory updates
This series changes the directory update code to retain the ILOCK on all
files involved in a rename until the end of the operation. The upcoming
parent pointers patchset applies parent pointers in a separate chained
update from the actual directory update, which is why it is now
necessary to keep the ILOCK instead of dropping it after the first
transaction in the chain.
As a side effect, we no longer need to hold the IOLOCK during an rmapbt
scan of inodes to serialize the scan with ongoing directory updates.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'retain-ilock-during-dir-ops-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: unlock new repair tempfiles after creation
xfs: don't pick up IOLOCK during rmapbt repair scan
xfs: Hold inode locks in xfs_rename
xfs: Hold inode locks in xfs_trans_alloc_dir
xfs: Hold inode locks in xfs_ialloc
xfs: Increase XFS_QM_TRANS_MAXDQS to 5
xfs: Increase XFS_DEFER_OPS_NR_INODES to 5
This series updates the design documentation for online fsck to reflect
the final design of the parent pointers feature as well as the
implementation of online fsck for the new metadata.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23VAAKCRBKO3ySh0YR
pg9gAP4kwa111TCKBZjr6hMpV0isKfKUWNjbO4pTEKmKM/fDBgEAssk71ReCpEt2
rPv88LnXyce/bWgvFb3wDjxFo2ucvAU=
=myBE
-----END PGP SIGNATURE-----
Merge tag 'online-fsck-design-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: design documentation for online fsck, part 2
This series updates the design documentation for online fsck to reflect
the final design of the parent pointers feature as well as the
implementation of online fsck for the new metadata.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'online-fsck-design-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
docs: describe xfs directory tree online fsck
docs: update offline parent pointer repair strategy
docs: update online directory and parent pointer repair sections
docs: update the parent pointers documentation to the final version
Every time EHT Operation element changed, mac80211 will parse it and
extract the valid puncturing bitmap according to the bandwidth.
Current driver only update puncturing bitmap to firmware as vdev
parameter. Which can only meet the needs of AP. But STA will also use
it as peer parameter. If only update as vdev parameter, might cause
firmware crash. QCN9274 is the same.
So update bandwidth and puncturing bitmap as peer parameters once they
changed for STA. Then send them to the firmware by WMI event.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0.c5-00481-QCAHMTSWPL_V1.0_V2.0_SILICONZ-3
Signed-off-by: Kang Yang <quic_kangyang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240408083047.22548-1-quic_kangyang@quicinc.com
Congratulations! You have made it to the final patchset of the main
online fsck feature! This patchset fixes some stalling behavior that I
observed when running FITRIM against large flash-based filesystems with
very heavily fragmented free space data. In summary -- the current
fstrim implementation optimizes for trimming the largest free extents
first, and holds the AGF lock for the duration of the operation. This
is great if fstrim is being run as a foreground process by a sysadmin.
For xfs_scrub, however, this isn't so good -- we don't really want to
block on one huge kernel call while reporting no progress information.
We don't want to hold the AGF so long that background processes stall.
These problems are easily fixable by issuing smaller FITRIM calls, but
there's still the problem of walking the entire cntbt. To solve that
second problem, we introduce a new sub-AG FITRIM implementation. To
solve the first problem, make it relax the AGF periodically.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23VAAKCRBKO3ySh0YR
pnLkAP9dlH5LKtJLK7Wbl3GC0EjPBUaX6a/nmkJPBIMocdautAD/X6J8ItPkx885
26qzJSXeapMIXVS1olUPuUL6B3jW/gE=
=HS4c
-----END PGP SIGNATURE-----
Merge tag 'discard-relax-locks-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: less heavy locks during fstrim
Congratulations! You have made it to the final patchset of the main
online fsck feature! This patchset fixes some stalling behavior that I
observed when running FITRIM against large flash-based filesystems with
very heavily fragmented free space data. In summary -- the current
fstrim implementation optimizes for trimming the largest free extents
first, and holds the AGF lock for the duration of the operation. This
is great if fstrim is being run as a foreground process by a sysadmin.
For xfs_scrub, however, this isn't so good -- we don't really want to
block on one huge kernel call while reporting no progress information.
We don't want to hold the AGF so long that background processes stall.
These problems are easily fixable by issuing smaller FITRIM calls, but
there's still the problem of walking the entire cntbt. To solve that
second problem, we introduce a new sub-AG FITRIM implementation. To
solve the first problem, make it relax the AGF periodically.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'discard-relax-locks-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: fix performance problems when fstrimming a subset of a fragmented AG
Currently, in the rx error data path, mac id is extracted from the
last 64bits of MSDU end description tag for each entry received in
the WBM error ring. Then, each entry will be updated into the MSDU
list for further processing. The extracted mac id is valid when a
single MSDU is not fragmented and received in the WBM error ring.
In scenarios where the size of a single MSDU received exceeds the
descriptor buffer size, resulting in fragmented or spillover MSDU
entries into the WBM error ring. In this case, the extracted mac id
from each spillover entry is invalid except the last spillover entry
of the MSDU. This invalid mac id leads to packet rejection.
To address this issue, check if the MSDU continuation flag is set,
then extract the valid mac id from the last spillover entry.
Propagate the valid mac id to all the spillover entries of the single
MSDU in the temporary MSDU list(scatter_msdu_list). Then, update this
into the MSDU list (msdu_list) for further processing.
Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1
Signed-off-by: Karthikeyan Periyasamy <quic_periyasa@quicinc.com>
Signed-off-by: Nithyanantham Paramasivam <quic_nithp@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240404141538.1277258-1-quic_nithp@quicinc.com
While doing QA of the online fsck code, I made a few observations:
First, nobody was checking that the di_onlink field is actually zero;
Second, that allocating a temporary file for repairs can fail (and
thus bring down the entire fs) if the inode cluster is corrupt; and
Third, that file link counts do not pin at ~0U to prevent integer
overflows. Fourth, the x{chk,rep}_metadata_inode_fork functions
should be subclassing the main scrub context, not modifying the
parent's setup willy-nilly.
This scattered patchset fixes those three problems.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23VAAKCRBKO3ySh0YR
phVNAQCUkBa3kFggj8pFTqmJUmbKK+umIBIpmQpQVEFeVVzjtwD/azZpYcexuMKY
3V81P3KZCOvs/KY0wJupB+5uLdJc5w4=
=brWH
-----END PGP SIGNATURE-----
Merge tag 'inode-repair-improvements-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: inode-related repair fixes
While doing QA of the online fsck code, I made a few observations:
First, nobody was checking that the di_onlink field is actually zero;
Second, that allocating a temporary file for repairs can fail (and
thus bring down the entire fs) if the inode cluster is corrupt; and
Third, that file link counts do not pin at ~0U to prevent integer
overflows. Fourth, the x{chk,rep}_metadata_inode_fork functions
should be subclassing the main scrub context, not modifying the
parent's setup willy-nilly.
This scattered patchset fixes those three problems.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'inode-repair-improvements-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: create subordinate scrub contexts for xchk_metadata_inode_subtype
xfs: pin inodes that would otherwise overflow link count
xfs: try to avoid allocating from sick inode clusters
xfs: check unused nlink fields in the ondisk inode
This series enhances the AGI scrub code to check the unlinked inode
bucket lists for errors, and fixes them if necessary. Now that iunlink
pointer updates are virtual log items, we can batch updates pretty
efficiently in the logging code.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23VAAKCRBKO3ySh0YR
piMPAP4+198X70x14t7HIrNy5qDud0RmzG8aLVL1wKm3LGG4mQD/Vm68M74Dua1O
pNviXZNaY0fhboehNBzwCkS8mvf0aQI=
=e3hD
-----END PGP SIGNATURE-----
Merge tag 'repair-iunlink-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: online fsck of iunlink buckets
This series enhances the AGI scrub code to check the unlinked inode
bucket lists for errors, and fixes them if necessary. Now that iunlink
pointer updates are virtual log items, we can batch updates pretty
efficiently in the logging code.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-iunlink-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: repair AGI unlinked inode bucket lists
xfs: hoist AGI repair context to a heap object
xfs: check AGI unlinked inode buckets
Marek reports, that the -next commit 1788cf6a91 (tty: serial: switch
from circ_buf to kfifo) broke meson_uart and qcom_geni_serial. The
commit mistakenly advanced the kfifo twice: once by
uart_fifo_get()/kfifo_out() and second time by uart_xmit_advance().
To advance the fifo only once, drop the superfluous uart_xmit_advance()
from both.
To count the TX statistics properly, use uart_fifo_out() in
qcom_geni_serial (meson_uart_start_tx() already uses that).
I checked all other uses of uart_xmit_advance() and they appear correct:
either they are finishing DMA transfers or are after peek/linear_ptr
(i.e. they do not advance fifo).
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 1788cf6a91 ("tty: serial: switch from circ_buf to kfifo")
Cc: Neil Armstrong <neil.armstrong@linaro.org>
Cc: Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>
Cc: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Link: https://lore.kernel.org/r/20240416054825.6211-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The patches in this set adds the ability to repair the target buffer of
a symbolic link, using the same salvage, rebuild, and swap strategy used
everywhere else.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23UwAKCRBKO3ySh0YR
pjM1AQCEEuX7qTakBtA1UB5UO/xH/MkQhza+GLknMAqngJA6dgD/UcKeuWeU4SaE
oi8G4nxbe2/BUS1Muv0/Y0RU9suVIAE=
=unik
-----END PGP SIGNATURE-----
Merge tag 'repair-symlink-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: online repair of symbolic links
The patches in this set adds the ability to repair the target buffer of
a symbolic link, using the same salvage, rebuild, and swap strategy used
everywhere else.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-symlink-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: online repair of symbolic links
xfs: pass the owner to xfs_symlink_write_target
xfs: expose xfs_bmap_local_to_extents for online repair
Orphaned files are defined to be files with nonzero ondisk link count
but no observable parent directory. This series enables online repair
to reparent orphaned files into the filesystem directory tree, and wires
up this reparenting ability into the directory, file link count, and
parent pointer repair functions. This is how we fix files with positive
link count that are not reachable through the directory tree.
This patch will also create the orphanage directory (lost+found) if it
is not present. In contrast to xfs_repair, we follow e2fsck in creating
the lost+found without group or other-owner access to avoid accidental
disclosure of files that were previously hidden by an 0700 directory.
That's silly security, but people have been known to do it.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23UwAKCRBKO3ySh0YR
pnJ8AP4kTiYucq40QUjYbG9xZGxbRenrgtwmBltcn6Xzm9PUVAD+KrU1GQ5Qm2zW
/Kl5nDRM9zqJgQ5CQiBGuu3puHfnOgw=
=vJ6T
-----END PGP SIGNATURE-----
Merge tag 'repair-orphanage-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: move orphan files to lost and found
Orphaned files are defined to be files with nonzero ondisk link count
but no observable parent directory. This series enables online repair
to reparent orphaned files into the filesystem directory tree, and wires
up this reparenting ability into the directory, file link count, and
parent pointer repair functions. This is how we fix files with positive
link count that are not reachable through the directory tree.
This patch will also create the orphanage directory (lost+found) if it
is not present. In contrast to xfs_repair, we follow e2fsck in creating
the lost+found without group or other-owner access to avoid accidental
disclosure of files that were previously hidden by an 0700 directory.
That's silly security, but people have been known to do it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-orphanage-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: ensure dentry consistency when the orphanage adopts a file
xfs: move files to orphanage instead of letting nlinks drop to zero
xfs: move orphan files to the orphanage
This series employs atomic extent swapping to enable safe reconstruction
of directory data. For now, XFS does not support reverse directory
links (aka parent pointers), so we can only salvage the dirents of a
directory and construct a new structure.
Directory repair therefore consists of five main parts:
First, we walk the existing directory to salvage as many entries as we
can, by adding them as new directory entries to the repair temp dir.
Second, we validate the parent pointer found in the directory. If one
was not found, we scan the entire filesystem looking for a potential
parent.
Third, we use atomic extent swaps to exchange the entire data fork
between the two directories.
Fourth, we reap the old directory blocks as carefully as we can.
To wrap up the directory repair code, we need to add to the regular
filesystem the ability to free all the data fork blocks in a directory.
This does not change anything with normal directories, since they must
still unlink and shrink one entry at a time. However, this will
facilitate freeing of partially-inactivated temporary directories during
log recovery.
The second half of this patchset implements repairs for the dotdot
entries of directories. For now there is only rudimentary support for
this, because there are no directory parent pointers, so the best we can
do is scanning the filesystem and the VFS dcache for answers.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23UwAKCRBKO3ySh0YR
piAGAP4hhYmBAiSGau5anRwUAFiELV2Irgz8k5oIGeWhg2m/kgEAn00d1rX8buLz
ZQyYs1dSRtBpYs2EIZRTnnM2W4dYLQY=
=2L3x
-----END PGP SIGNATURE-----
Merge tag 'repair-dirs-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: online repair of directories
This series employs atomic extent swapping to enable safe reconstruction
of directory data. For now, XFS does not support reverse directory
links (aka parent pointers), so we can only salvage the dirents of a
directory and construct a new structure.
Directory repair therefore consists of five main parts:
First, we walk the existing directory to salvage as many entries as we
can, by adding them as new directory entries to the repair temp dir.
Second, we validate the parent pointer found in the directory. If one
was not found, we scan the entire filesystem looking for a potential
parent.
Third, we use atomic extent swaps to exchange the entire data fork
between the two directories.
Fourth, we reap the old directory blocks as carefully as we can.
To wrap up the directory repair code, we need to add to the regular
filesystem the ability to free all the data fork blocks in a directory.
This does not change anything with normal directories, since they must
still unlink and shrink one entry at a time. However, this will
facilitate freeing of partially-inactivated temporary directories during
log recovery.
The second half of this patchset implements repairs for the dotdot
entries of directories. For now there is only rudimentary support for
this, because there are no directory parent pointers, so the best we can
do is scanning the filesystem and the VFS dcache for answers.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-dirs-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: ask the dentry cache if it knows the parent of a directory
xfs: online repair of parent pointers
xfs: scan the filesystem to repair a directory dotdot entry
xfs: online repair of directories
xfs: inactivate directory data blocks
This series adds some logic to the inode scrubbers so that they can
detect and deal with consistency errors between the link count and the
per-inode unlinked list state. The helpers needed to do this are
presented here because they are a prequisite for rebuildng directories,
since we need to get a rebuilt non-empty directory off the unlinked
list.
Note that this patchset does not provide comprehensive reconstruction of
the AGI unlinked list; that is coming in a subsequent patchset.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23UwAKCRBKO3ySh0YR
pt9pAQDbOMQ/9Y3Iyywkf9jTj9EvXEOpRlFPMd0F4gmtO9rhcAD/cQH9tctLcpeY
DuAHqtmR3o2elpoXZrR1b+mAkS26Twc=
=5oDH
-----END PGP SIGNATURE-----
Merge tag 'repair-unlinked-inode-state-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: online repair of inode unlinked state
This series adds some logic to the inode scrubbers so that they can
detect and deal with consistency errors between the link count and the
per-inode unlinked list state. The helpers needed to do this are
presented here because they are a prequisite for rebuildng directories,
since we need to get a rebuilt non-empty directory off the unlinked
list.
Note that this patchset does not provide comprehensive reconstruction of
the AGI unlinked list; that is coming in a subsequent patchset.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-unlinked-inode-state-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: update the unlinked list when repairing link counts
xfs: ensure unlinked list state is consistent with nlink during scrub
This series employs atomic extent swapping to enable safe reconstruction
of extended attribute data attached to a file. Because xattrs do not
have any redundant information to draw off of, we can at best salvage
as much data as we can and build a new structure.
Rebuilding an extended attribute structure consists of these three
steps:
First, we walk the existing attributes to salvage as many of them as we
can, by adding them as new attributes attached to the repair tempfile.
We need to add a new xfile-based data structure to hold blobs of
arbitrary length to stage the xattr names and values.
Second, we write the salvaged attributes to a temporary file, and use
atomic extent swaps to exchange the entire attribute fork between the
two files.
Finally, we reap the old xattr blocks (which are now in the temporary
file) as carefully as we can.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23UwAKCRBKO3ySh0YR
pgtVAQDEjDtM1TqUn8neJtXqtOPC2FZdLFq6Z1uSzxGWSRi9TwD/fcwgpvIrdF7g
LFrCRk9UUJZRxrK6kGb+RcEtSJwwNwc=
=FVWN
-----END PGP SIGNATURE-----
Merge tag 'repair-xattrs-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: online repair of extended attributes
This series employs atomic extent swapping to enable safe reconstruction
of extended attribute data attached to a file. Because xattrs do not
have any redundant information to draw off of, we can at best salvage
as much data as we can and build a new structure.
Rebuilding an extended attribute structure consists of these three
steps:
First, we walk the existing attributes to salvage as many of them as we
can, by adding them as new attributes attached to the repair tempfile.
We need to add a new xfile-based data structure to hold blobs of
arbitrary length to stage the xattr names and values.
Second, we write the salvaged attributes to a temporary file, and use
atomic extent swaps to exchange the entire attribute fork between the
two files.
Finally, we reap the old xattr blocks (which are now in the temporary
file) as carefully as we can.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-xattrs-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: create an xattr iteration function for scrub
xfs: flag empty xattr leaf blocks for optimization
xfs: scrub should set preen if attr leaf has holes
xfs: repair extended attributes
xfs: use atomic extent swapping to fix user file fork data
xfs: create a blob array data structure
xfs: enable discarding of folios backing an xfile
There are a couple of significant changes that need to be made to the
directory and xattr code before we can support online repairs of those
data structures.
The first change is because online repair is designed to use libxfs to
create a replacement dir/xattr structure in a temporary file, and use
atomic extent swapping to commit the corrected structure. To avoid the
performance hit of walking every block of the new structure to rewrite
the owner number before the swap, we instead change libxfs to allow
callers of the dir and xattr code the ability to set an explicit owner
number to be written into the header fields of any new blocks that are
created. For regular operation this will be the directory inode number.
The second change is to update the dir/xattr code to actually *check*
the owner number in each block that is read off the disk, since we don't
currently do that.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23UwAKCRBKO3ySh0YR
po6LAQD4r4tzS1xMNW/ynLntzLNiYukkjI8uGpHw1tPpwmskKQD8Dw+bmGQPjUUR
v62p5rUNcinvgxwdJwBcsOERGlVkIww=
=6MPB
-----END PGP SIGNATURE-----
Merge tag 'dirattr-validate-owners-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: set and validate dir/attr block owners
There are a couple of significant changes that need to be made to the
directory and xattr code before we can support online repairs of those
data structures.
The first change is because online repair is designed to use libxfs to
create a replacement dir/xattr structure in a temporary file, and use
atomic extent swapping to commit the corrected structure. To avoid the
performance hit of walking every block of the new structure to rewrite
the owner number before the swap, we instead change libxfs to allow
callers of the dir and xattr code the ability to set an explicit owner
number to be written into the header fields of any new blocks that are
created. For regular operation this will be the directory inode number.
The second change is to update the dir/xattr code to actually *check*
the owner number in each block that is read off the disk, since we don't
currently do that.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'dirattr-validate-owners-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: validate explicit directory free block owners
xfs: validate explicit directory block buffer owners
xfs: validate explicit directory data buffer owners
xfs: validate directory leaf buffer owners
xfs: validate dabtree node buffer owners
xfs: validate attr remote value buffer owners
xfs: validate attr leaf buffer owners
xfs: reduce indenting in xfs_attr_node_list
xfs: use the xfs_da_args owner field to set new dir/attr block owner
xfs: add an explicit owner field to xfs_da_args
We now have all the infrastructure we need to repair file metadata.
We'll begin with the realtime summary file, because it is the least
complex data structure. To support this we need to add three more
pieces to the temporary file code from the previous patchset --
preallocating space in the temp file, formatting metadata into that
space and writing the blocks to disk, and swapping the fork mappings
atomically.
After that, the actual reconstruction of the realtime summary
information is pretty simple, since we can simply write the incore
copy computed by the rtsummary scrubber to the temporary file, swap the
contents, and reap the old blocks.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23UgAKCRBKO3ySh0YR
pp/sAQCwODvb3ahgWbNMp6ejewJ1p8NjbmgRbTFckcwWROz4zQEAltyzqZBr6GuC
4E+7LGrh3Q03VX6pqNBGcGelNj20UgM=
=c0Gb
-----END PGP SIGNATURE-----
Merge tag 'repair-rtsummary-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: online repair of realtime summaries
We now have all the infrastructure we need to repair file metadata.
We'll begin with the realtime summary file, because it is the least
complex data structure. To support this we need to add three more
pieces to the temporary file code from the previous patchset --
preallocating space in the temp file, formatting metadata into that
space and writing the blocks to disk, and swapping the fork mappings
atomically.
After that, the actual reconstruction of the realtime summary
information is pretty simple, since we can simply write the incore
copy computed by the rtsummary scrubber to the temporary file, swap the
contents, and reap the old blocks.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-rtsummary-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: online repair of realtime summaries
xfs: teach the tempfile to set up atomic file content exchanges
xfs: support preallocating and copying content into temporary files
As mentioned earlier, the repair strategy for file-based metadata is to
build a new copy in a temporary file and swap the file fork mappings
with the metadata inode. We've built the atomic extent swap facility,
so now we need to build a facility for handling private temporary files.
The first step is to teach the filesystem to ignore the temporary files.
We'll mark them as PRIVATE in the VFS so that the kernel security
modules will leave it alone. The second step is to add the online
repair code the ability to create a temporary file and reap extents from
the temporary file after the extent swap.
This has been running on the djcloud for months with no problems. Enjoy!
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQ2qTKExjcn+O1o2YRKO3ySh0YRpgUCZh23UgAKCRBKO3ySh0YR
pukxAQCWf6T3FpJHXPHAwc8ANNWAZHufPTn8LH1m2DTKal6rGgEAo0rnqmV5xN/p
WDMMAm5ngW2mDlBJFX8ClE2+1DHsqAc=
=SKWV
-----END PGP SIGNATURE-----
Merge tag 'repair-tempfiles-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux into xfs-6.10-mergeA
xfs: create temporary files for online repair
As mentioned earlier, the repair strategy for file-based metadata is to
build a new copy in a temporary file and swap the file fork mappings
with the metadata inode. We've built the atomic extent swap facility,
so now we need to build a facility for handling private temporary files.
The first step is to teach the filesystem to ignore the temporary files.
We'll mark them as PRIVATE in the VFS so that the kernel security
modules will leave it alone. The second step is to add the online
repair code the ability to create a temporary file and reap extents from
the temporary file after the extent swap.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
* tag 'repair-tempfiles-6.10_2024-04-15' of https://git.kernel.org/pub/scm/linux/kernel/git/djwong/xfs-linux:
xfs: add the ability to reap entire inode forks
xfs: refactor live buffer invalidation for repairs
xfs: create temporary files and directories for online repair
xfs: hide private inodes from bulkstat and handle functions