Use GPIO_LOOKUP() macro which provides a compound literal
and can be used with dynamic data.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240408153749.119394-1-andriy.shevchenko@linux.intel.com
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The Lenovo Yoga Tablet 2 Pro 1380F/L is a x86 ACPI tablet which ships with
Android x86 as factory OS. Its DSDT contains a bunch of I2C devices which
are not actually there, causing various resource conflicts. Enumeration of
these is skipped through the acpi_quirk_skip_i2c_client_enumeration().
Add support for manually instantiating the I2C + other devices which are
actually present on this tablet by adding the necessary device info to
the x86-android-tablets module.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-2-hdegoede@redhat.com
Not all subsystems support a device getting removed while there are
still consumers of the device with a reference to the device.
One example of this is the regulator subsystem. If a regulator gets
unregistered while there are still drivers holding a reference
a WARN() at drivers/regulator/core.c:5829 triggers, e.g.:
WARNING: CPU: 1 PID: 1587 at drivers/regulator/core.c:5829 regulator_unregister
Hardware name: Intel Corp. VALLEYVIEW C0 PLATFORM/BYT-T FFD8, BIOS BLADE_21.X64.0005.R00.1504101516 FFD8_X64_R_2015_04_10_1516 04/10/2015
RIP: 0010:regulator_unregister
Call Trace:
<TASK>
regulator_unregister
devres_release_group
i2c_device_remove
device_release_driver_internal
bus_remove_device
device_del
device_unregister
x86_android_tablet_remove
On the Lenovo Yoga Tablet 2 series the bq24190 charger chip also provides
a 5V boost converter output for powering USB devices connected to the micro
USB port, the bq24190-charger driver exports this as a Vbus regulator.
On the 830 (8") and 1050 ("10") models this regulator is controlled by
a platform_device and x86_android_tablet_remove() removes platform_device-s
before i2c_clients so the consumer gets removed first.
But on the 1380 (13") model there is a lc824206xa micro-USB switch
connected over I2C and the extcon driver for that controls the regulator.
The bq24190 i2c-client *must* be registered first, because that creates
the regulator with the lc824206xa listed as its consumer. If the regulator
has not been registered yet the lc824206xa driver will end up getting
a dummy regulator.
Since in this case both the regulator provider and consumer are I2C
devices, the only way to ensure that the consumer is unregistered first
is to unregister the I2C devices in reverse order of in which they were
created.
For consistency and to avoid similar problems in the future change
x86_android_tablet_remove() to unregister all device types in reverse
order.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20240406125058.13624-1-hdegoede@redhat.com
AMD MP2 STB function provides a data buffer used to log debug information
about the system execution during S2Idle suspend/resume.
A data buffer known as the STB (Smart Trace Buffer) is a circular buffer
which is a low-level log to assist in debugging by providing insights
into any potential hangs or stalls that may occur during the S2Idle
suspend/resume processes.
The current PMC driver retrieves STB data from MP1, but there can be
scenarios where MP1 might hang or become unresponsive, leading to the
loss of critical data present in the STB buffer. This defeats the purpose
of the STB buffer, which was originally meant to help identify system
failures.
This feature creates stb_read_previous_boot debugfs allows users to
retrieve the STB log from MP2 specifically from the last occurrence of
the S2Idle suspend/resume. A userspace daemon can access STB log of last
S2Idle suspend/resume which can help to troubleshoot potential issues
related to hangs or stalls during the S2Idle suspend/resume sequence.
Reviewed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Basavaraj Natikar <Basavaraj.Natikar@amd.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://lore.kernel.org/r/20240404090702.325838-1-Basavaraj.Natikar@amd.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Use the relatively new scope based of_node_put() cleanup to simplify
function exit handling. Doing so reduces the chances of forgetting an
of_node_put() and simplifies error paths by avoiding the need for goto
statements.
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240409-dt-cleanup-free-v2-3-5b419a4af38d@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Use the relatively new scope based kfree() cleanup to simplify error
handling. Doing so reduces the chances of memory leaks and simplifies
error paths by avoiding the need for goto statements.
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240409-dt-cleanup-free-v2-2-5b419a4af38d@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Freeing a property struct is 3 kfree()'s which is duplicated in multiple
spots. Add a helper, __of_prop_free(), and replace all the open coded
cases in the DT code.
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240409-dt-cleanup-free-v2-1-5b419a4af38d@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
The FnLock is retrieved and set in several places in the code.
Move details into ideapad_fn_lock_get and ideapad_fn_lock_set functions.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/dfd3a62a2b71339bbddf01e8a2ccd5ca92ce7202.1712063200.git.soyer@irl.hu
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Newer laptops have FnLock LED.
Add a define for this very common function.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Lee Jones <lee@kernel.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/8ac95e85a53dc0b8cce1e27fc1cab6d19221543b.1712063200.git.soyer@irl.hu
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
We have DRM_MODE_FMT and DRM_MODE_ARG() macros to allow unified debug
printing of modes in any printk-formatted logging. Prefer them over
drm_mode_debug_printmodeline().
This allows drm device specific logging of modes, in the right drm debug
category, and inline with the rest of the logging instead of split to
multiple lines.
Suggested-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/6df18588dfa17c5d0a1501f5af9ff21f25a1981b.1712568037.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Prefer drm device based drm_dbg_kms(), drm_err(), drm_WARN_ON() over
DRM_DEBUG_KMS(), DRM_ERROR(), and WARN_ON(). Also update encoder,
connector, and crtc logging to include the object id and name, where
possible.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/b8557c4b2db0e5c931a6d82b5cc8ac5f3a3e1a77.1712568037.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Pass the con_id instead of property so that callers won't repeat
the GPIO suffixes to try.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
New coming user may need to check for _CRS fallback slightly differently.
Move the current check out of the helper function to allow that user to
use it.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Now that we don't perform anything on the GPIO descriptor,
we may simplify the error path in newly introduced helper.
Do it so.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We want to reuse it later on in the code. In particular, it helps
to clean up the users of acpi_dev_gpio_irq_wake_get_by().
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
We have a temporary variable to keep a pointer to struct device.
Utilise it where it makes sense.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To avoid accessing and parsing the raw EDID with drm_edid_raw(), switch
to the struct drm_edid based function to extract product id, and use the
drm printer function to debug log it.
The underlying assumption is that struct drm_edid_product_id and struct
lvds_pnp_id describe identical data, albeit with slightly different
member definitions.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ec5148dd43221b32cb2066bc7fd264a069c1188b.1712655867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a function to print a decoded EDID vendor and product id to a drm
printer, optionally with the raw data.
v2:
- refactor date printing
- use seq_buf to avoid kasprintf() (Ville)
- handle week == 0 (Ville)
- use be16_to_cpu() on manufacturer_name
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Melissa Wen <mwen@igalia.com> # v1
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/32bbc83ee6557809ef6d7a5edb1bc8ef4d56d10f.1712655867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Add a struct drm_edid based function to get the vendor and product ID
from an EDID. Add a separate struct for defining this part of the EDID,
with defined byte order for manufacturer name, product code and serial
number.
v2: Define manufacturer_name as __be16 instead of u8[2] (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Acked-by: Melissa Wen <mwen@igalia.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/df0e7dedbf7f2c190039d6e6eae3e126eba113c9.1712655867.git.jani.nikula@intel.com
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
In order to be able to limit the amount of memory that is allocated
by IOMMU subsystem, the memory must be accounted.
Account IOMMU as part of the secondary pagetables as it was discussed
at LPC.
The value of SecPageTables now contains mmeory allocation by IOMMU
and KVM.
There is a difference between GFP_ACCOUNT and what NR_IOMMU_PAGES shows.
GFP_ACCOUNT is set only where it makes sense to charge to user
processes, i.e. IOMMU Page Tables, but there more IOMMU shared data
that should not really be charged to a specific process.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-12-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add NR_IOMMU_PAGES into node_stat_item that counts number of pages
that are allocated by the IOMMU subsystem.
The allocations can be view per-node via:
/sys/devices/system/node/nodeN/vmstat.
For example:
$ grep iommu /sys/devices/system/node/node*/vmstat
/sys/devices/system/node/node0/vmstat:nr_iommu_pages 106025
/sys/devices/system/node/node1/vmstat:nr_iommu_pages 3464
The value is in page-count, therefore, in the above example
the iommu allocations amount to ~428M.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-11-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert iommu/rockchip-iommu.c to use the new page allocation functions
provided in iommu-pages.h.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-8-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert iommu/exynos-iommu.c to use the new page allocation functions
provided in iommu-pages.h.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-7-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert iommu/io-pgtable-dart.c to use the new page allocation functions
provided in iommu-pages.h., and remove unnecessary struct io_pgtable_cfg
argument from __dart_alloc_pages().
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Janne Grunau <j@jannau.net>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-6-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Convert iommu/io-pgtable-arm.c to use the new page allocation functions
provided in iommu-pages.h.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-5-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Free the IOMMU page tables via iommu_put_pages_list(). The page tables
were allocated via iommu_alloc_* functions in architecture specific
places, but are released in dma-iommu if the freelist is gathered during
map/unmap operations into iommu_iotlb_gather data structure.
Currently, only iommu/intel that does that.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-3-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In order to improve observability and accountability of IOMMU layer, we
must account the number of pages that are allocated by functions that
are calling directly into buddy allocator.
This is achieved by first wrapping the allocation related functions into a
separate inline functions in new file:
drivers/iommu/iommu-pages.h
Convert all page allocation calls under iommu/intel to use these new
functions.
Signed-off-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Acked-by: David Rientjes <rientjes@google.com>
Tested-by: Bagas Sanjaya <bagasdotme@gmail.com>
Link: https://lore.kernel.org/r/20240413002522.1101315-2-pasha.tatashin@soleen.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This removes one indirect function call per folio, and adds type safety
by not casting through a void pointer.
Based on a patch by Matthew Wilcox.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20240412061614.1511629-1-hch@lst.de
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Julien Panis says:
====================
Add minimal XDP support to TI AM65 CPSW Ethernet driver
This patch adds XDP support to TI AM65 CPSW Ethernet driver.
The following features are implemented: NETDEV_XDP_ACT_BASIC,
NETDEV_XDP_ACT_REDIRECT, and NETDEV_XDP_ACT_NDO_XMIT.
Zero-copy and non-linear XDP buffer supports are NOT implemented.
Besides, the page pool memory model is used to get better performance.
====================
Signed-off-by: Julien Panis <jpanis@baylibre.com>
This patch adds XDP (eXpress Data Path) support to TI AM65 CPSW
Ethernet driver. The following features are implemented:
- NETDEV_XDP_ACT_BASIC (XDP_PASS, XDP_TX, XDP_DROP, XDP_ABORTED)
- NETDEV_XDP_ACT_REDIRECT (XDP_REDIRECT)
- NETDEV_XDP_ACT_NDO_XMIT (ndo_xdp_xmit callback)
The page pool memory model is used to get better performance.
Below are benchmark results obtained for the receiver with iperf3 default
parameters:
- Without page pool: 495 Mbits/sec
- With page pool: 605 Mbits/sec (actually 610 Mbits/sec, with a 5 Mbits/sec
loss due to extra processing in the hot path to handle XDP).
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch introduces a member and the related accessors which can be
used to store descriptor specific additional information. This member
can store, for instance, an ID to differentiate a skb TX buffer type
from a xdpf TX buffer type.
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds accessors for desc_size and cpumem members. They may be
used, for instance, to compute a descriptor index.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Julien Panis <jpanis@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
i2c_device_probe(), seems to assume that irq = 0 means that there is no
irq to request.
The driver also believes that on the clean path. So lets be consistent
here.
Also make smatch happy.
Fix:
drivers/media/i2c/adv7180.c:1526 adv7180_probe() warn: 'client->irq' from request_threaded_irq() not released on lines: 1526
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Simplify a bit the code introducing a new variable for iterating through
the control list.
It also makes smatch happy:
drivers/media/v4l2-core/v4l2-ctrls-api.c:1091 v4l2_query_ext_ctrl() warn: iterator used outside loop: 'ref'
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
[hverkuil: fix tiny whitespace issue in 'pos = ref': use just one space]
hva->clk cannot be NULL at this point. Simplify the code and make smatch
happy:
drivers/media/platform/st/sti/hva/hva-hw.c:412 hva_hw_probe() warn: 'hva->clk' from clk_prepare() not released on lines: 412
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Add missing release_firmware on the error paths.
drivers/media/usb/dvb-usb/dib0700_devices.c:2415 stk9090m_frontend_attach() warn: 'state->frontend_firmware' from request_firmware() not released on lines: 2415.
drivers/media/usb/dvb-usb/dib0700_devices.c:2497 nim9090md_frontend_attach() warn: 'state->frontend_firmware' from request_firmware() not released on lines: 2489,2497.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Do not cache the file, instead load it on demand.
This makes smatch a happy parser:
drivers/media/dvb-frontends/drx39xyj/drxj.c:11908 drx_ctrl_u_code() warn: 'fw' from request_firmware() not released on lines: 11877,11886,11896.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>