Since commit 868941b144 ("fs: remove no_llseek"), no_llseek() is
simply defined to be NULL, and a NULL llseek means seeking is
unsupported.
So for statically defined file_operations, such as all these, there's no
need or benefit to set llseek = no_llseek.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240903111951.141376-1-mpe@ellerman.id.au
The non-standard "fast endian switch" syscall was added in 2008[1],
but was never widely used. It was disabled by default in 2017[2], and
there's no evidence it's ever been used since.
Remove it entirely.
A normal endian switch syscall was added in 2015[3].
[1]: 745a14cc26 ("[POWERPC] Add fast little-endian switch system call")
[2]: 529d235a0e ("powerpc: Add a proper syscall for switching endianness")
[3]: 727f13616c ("powerpc: Disable the fast-endian switch syscall by default")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240823070830.1269033-1-mpe@ellerman.id.au
Transparent hugepages (THP) are not supported when using the Hash Page
Table (HPT) MMU with 4K pages.
Currently a HPT-only 4K kernel still allows THP to be enabled, which
is misleading.
Add restrictions to the PPC_THP symbol so that if the kernel is
configured with 4K pages and only the HPT MMU (no Radix), then THP is
disabled.
Note that it's still possible to build a combined Radix/HPT kernel with 4K
pages, which does allow THP to be enabled at build time. As such the HPT
code still needs to provide some THP related symbols, to allow the build
to succeed, but those code paths are never run. See the stubs in
arch/powerpc/include/asm/book3s/64/hash-4k.h.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240823032911.1238471-2-mpe@ellerman.id.au
Move the Kconfig symbols related to transparent hugepages (THP) under a
separate config symbol, separate from CONFIG_PPC_BOOK3S_64.
The new symbol is automatically enabled if CONFIG_PPC_BOOK3S_64 is
enabled, so there is no behaviour change, except for the existence of
the new PPC_THP symbol.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240823032911.1238471-1-mpe@ellerman.id.au
This is an adaptation of commit f3a112c0c4 ("x86,rethook,kprobes:
Replace kretprobe with rethook on x86") to powerpc.
Rethook follows the existing kretprobe implementation, but separates
it from kprobes so that it can be used by fprobe (ftrace-based
function entry/exit probes). As such, this patch also enables fprobe
to work on powerpc. The only other change compared to the existing
kretprobe implementation is doing the return address fixup in
arch_rethook_fixup_return().
Reference to other archs:
commit b57c2f1240 ("riscv: add riscv rethook implementation")
commit 7b0a096436 ("LoongArch: Replace kretprobe with rethook")
Note:
=====
In future, rethook will be only for kretprobe, and kretprobe
will be replaced by fprobe.
https://lore.kernel.org/all/172000134410.63468.13742222887213469474.stgit@devnote2/
We will adapt the above implementation for powerpc once its upstream.
Until then, we can have this implementation of rethook to serve
current kretprobe usecases.
Reviewed-by: Naveen Rao <naveen@kernel.org>
Signed-off-by: Abhishek Dubey <adubey@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240830113131.7597-1-adubey@linux.ibm.com
'struct kobj_type' is not modified. It is only used in kobject_init()
which takes a 'const struct kobj_type *ktype' parameter.
Constifying this structure moves some data to a read-only section,
so increase over all security.
On a x86_64, compiled with ppc64 defconfig:
Before:
======
text data bss dec hex filename
1885 368 16 2269 8dd arch/powerpc/platforms/pseries/vas-sysfs.o
After:
======
text data bss dec hex filename
1981 272 16 2269 8dd arch/powerpc/platforms/pseries/vas-sysfs.o
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240826150957.3500237-3-huangxiaojia2@huawei.com
'struct kobj_type' is not modified. It is only used in kobject_init()
which takes a 'const struct kobj_type *ktype' parameter.
Constifying this structure moves some data to a read-only section,
so increase over all security.
On a x86_64, compiled with ppc64 defconfig:
Before:
======
text data bss dec hex filename
3775 256 8 4039 fc7 arch/powerpc/platforms/powernv/opal-dump.o
2679 260 8 2947 b83 arch/powerpc/platforms/powernv/opal-elog.o
After:
======
text data bss dec hex filename
3823 208 8 4039 fc7 arch/powerpc/platforms/powernv/opal-dump.o
2727 212 8 2947 b83 arch/powerpc/platforms/powernv/opal-elog.o
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240826150957.3500237-2-huangxiaojia2@huawei.com
'struct kobj_type' is not modified. It is only used in
kobject_init_and_add()/kobject_init() which takes
a 'const struct kobj_type *ktype' parameter.
Constifying this structure moves some data to a read-only section,
so increase over all security.
On a x86_64, compiled with ppc64 defconfig:
Before:
======
text data bss dec hex filename
7145 606 0 7751 1e47 arch/powerpc/kernel/cacheinfo.o
3663 384 16 4063 fdf arch/powerpc/kernel/secvar-sysfs.o
After:
======
text data bss dec hex filename
7193 558 0 7751 1e47 arch/powerpc/kernel/cacheinfo.o
3663 384 16 4063 fdf arch/powerpc/kernel/secvar-sysfs.o
Signed-off-by: Huang Xiaojia <huangxiaojia2@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240826150957.3500237-1-huangxiaojia2@huawei.com
The commit 783bf5d09f ("spi: spi-fsl-lpspi: limit PRESCALE bit in
TCR register") doesn't implement the prescaler maximum as intended.
The maximum allowed value for i.MX93 should be 1 and for i.MX7ULP
it should be 7. So this needs also a adjustment of the comparison
in the scldiv calculation.
Fixes: 783bf5d09f ("spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register")
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Link: https://patch.msgid.link/20240905111537.90389-1-wahrenst@gmx.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Arm Primecell blocks have a functional clock and a bus clock. The
Toshiba TMPV7708 only defines the bus clock (apb_pclk). Add the
"uartclk" and "sspclk" clocks to the PL011 and PL022 nodes,
respectively.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20240826183848.1290957-2-robh@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The period size represents the size of the DMA descriptor. To ensure all
DMA descriptors start from a well-aligned address, the period size must
be divided by (sample size * maxburst), not just by maxburst.
This adjustment allows for computing a higher maxburst value, thereby
increasing the performance of the DMA transfer.
Previously, snd_pcm_lib_period_bytes() returned 0 because the runtime HW
parameters are computed after the hw_params() callbacks are used.
To address this, we now use params_*() functions to compute the period
size accurately. This change optimizes the DMA transfer performance by
ensuring proper alignment and efficient use of maxburst values.
[andrei.simion@microchip.com: Reword commit message and commit title.
Add macros with values for maximum DMA chunk size allowed.
Add DMA_BURST_ALIGNED preprocessor function to check the alignment of the
DMA burst]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Signed-off-by: Andrei Simion <andrei.simion@microchip.com>
Link: https://patch.msgid.link/20240905095633.113784-1-andrei.simion@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
- Add specific config to enable:
- MT8365 sound support
- MT6357 audio codec support
- Add the mt8365 directory and all drivers under it.
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v8-2-e80a57d026ce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the support of MT6357 PMIC audio codec.
Signed-off-by: Nicolas Belin <nbelin@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
Link: https://patch.msgid.link/20240226-audio-i350-v8-1-e80a57d026ce@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Replace comma between expressions with semicolons.
Using a ',' in place of a ';' can have unintended side effects.
Although that is not the case here, it is seems best to use ';'
unless ',' is intended.
Found by inspection.
No functional change intended.
Compile tested only.
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240904015003.1065872-1-nichen@iscas.ac.cn
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This cpupower update for Linux 6.12-rc1 consists of an enhancement
to cpuidle tool to display the residency value of cpuidle states.
This addition provides a clearer and more detailed view of idle
state information when using cpuidle-info.
-----BEGIN PGP SIGNATURE-----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=fcIj
-----END PGP SIGNATURE-----
Merge tag 'linux-cpupower-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge a cpupower utility update for 6.12 from Shuah Khan:
"This cpupower update for Linux 6.12-rc1 consists of an enhancement
to cpuidle tool to display the residency value of cpuidle states.
This addition provides a clearer and more detailed view of idle
state information when using cpuidle-info."
* tag 'linux-cpupower-6.12-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
tools/cpupower: display residency value in idle-info
* Validate return of any attempt to update EPP limits, which fixes
the masking hardware problems.
-----BEGIN PGP SIGNATURE-----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=nPcu
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.12-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Merge an amd-pstate driver update for 6.12 from Mario Limonciello:
"amd-pstate development for 6.12:
* Validate return of any attempt to update EPP limits, which fixes
the masking hardware problems."
* tag 'amd-pstate-v6.12-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Catch failures for amd_pstate_epp_update_limit()
Configure correct bf number and bitmap in beamforming mcu command for
mt7992 chipsets, which only support dual-band.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-8-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
If a VIF acts as a beamformer, it should check peer's beamformee
capability, and vice versa.
Fixes: ba01944ade ("wifi: mt76: mt7996: add EHT beamforming support")
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-7-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
According to IEEE P802.11be/D6.0 Table 9-417n, beamformee SS field stands
for the maximum number of spatial streams that the STA can receive in an
EHT sounding NDP minus 1, and the minimum value of this field is 3.
This value indicates the decoding capability of a beamformee, which is
independent of current antenna settings. Correct the value for mt7996
and mt7992 chipsets based on their HW capability.
Signed-off-by: Howard Hsu <howard-yh.hsu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-6-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Advertize beacon_int_min_gcd as 100 to allow setting different beacon
intervals on different interfaces.
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-4-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
According to connac3 HW design, the WMM index of AP and STA interface
should be 0 and 3, respectively.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-3-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
During scanning, UNI_CHANNEL_RX_PATH tag is necessary for the firmware to
properly stop and resume MAC TX queue. Without this tag, HW needs more time
to resume traffic when switching back to working channel.
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-2-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The chainmask is u16 so using hweight8 cannot get correct tx_ant.
Without this patch, the tx_ant of band 2 would be -1 and lead to the
following issue:
BUG: KASAN: stack-out-of-bounds in mt7996_mcu_add_sta+0x12e0/0x16e0 [mt7996e]
Fixes: 98686cd216 ("wifi: mt76: mt7996: add driver for MediaTek Wi-Fi 7 (802.11be) devices")
Signed-off-by: Peter Chiu <chui-hao.chiu@mediatek.com>
Signed-off-by: Shayne Chen <shayne.chen@mediatek.com>
Link: https://patch.msgid.link/20240816094635.2391-1-shayne.chen@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
The check should start from 5845 to 5925, which includes
channels 169, 173, and 177.
Fixes: 09382d8f86 ("wifi: mt76: mt7921: update the channel usage when the regd domain changed")
Signed-off-by: Ming Yen Hsieh <mingyen.hsieh@mediatek.com>
Link: https://patch.msgid.link/20240806013408.17874-1-mingyen.hsieh@mediatek.com
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Add the __counted_by compiler attribute to the flexible array member
entries to improve access bounds-checking via CONFIG_UBSAN_BOUNDS and
CONFIG_FORTIFY_SOURCE.
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Link: https://patch.msgid.link/20240904014956.2035117-1-lihongbo22@huawei.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Hangbin Liu says:
====================
Bonding: support new xfrm state offload functions
Add 2 new xfrm state offload functions xdo_dev_state_advance_esn and
xdo_dev_state_update_stats for bonding. The xdo_dev_state_free will be
added by Jianbo's patchset [1]. I will add the bonding xfrm policy offload
in future.
v7: no update, just rebase the code.
v6: Use "Return: " based on ./scripts/kernel-doc (Simon Horman)
v5: Rebase to latest net-next, update function doc (Jakub Kicinski)
v4: Ratelimit pr_warn (Sabrina Dubroca)
v3: Re-format bond_ipsec_dev, use slave_warn instead of WARN_ON (Nikolay Aleksandrov)
Fix bond_ipsec_dev defination, add *. (Simon Horman, kernel test robot)
Fix "real" typo (kernel test robot)
v2: Add a function to process the common device checking (Nikolay Aleksandrov)
Remove unused variable (Simon Horman)
v1: lore.kernel.org/netdev/20240816035518.203704-1-liuhangbin@gmail.com
====================
Link: https://patch.msgid.link/20240904003457.3847086-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The patch add xfrm statistics update for bonding IPsec offload.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Currently, users can see that bonding supports IPSec HW offload via ethtool.
However, this functionality does not work with NICs like Mellanox cards when
ESN (Extended Sequence Numbers) is enabled, as ESN functions are not yet
supported. This patch adds ESN support to the bonding IPSec device offload,
ensuring proper functionality with NICs that support ESN.
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
This patch adds a common function to check the status of IPSec devices.
This function will be useful for future implementations, such as IPSec ESN
and state offload callbacks.
Suggested-by: Nikolay Aleksandrov <razor@blackwall.org>
Reviewed-by: Nikolay Aleksandrov <razor@blackwall.org>
Acked-by: Jay Vosburgh <jv@jvosburgh.net>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
* Fix an incorrect warning emitted on processors that don't
support X86_FEATURE_CPPC.
-----BEGIN PGP SIGNATURE-----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=VmBp
-----END PGP SIGNATURE-----
Merge tag 'amd-pstate-v6.11-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux
Pull an amd-pstate fix for 6.11 from Mario Limonciello:
"second round of amd-pstate fixes for 6.11:
* Fix an incorrect warning emitted on processors that don't
support X86_FEATURE_CPPC."
* tag 'amd-pstate-v6.11-2024-09-04' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/superm1/linux:
cpufreq/amd-pstate: Remove warning for X86_FEATURE_CPPC on certain Zen models
There are only two callers of thermal_zone_device_is_enabled()
and one of them call is under the zone lock and the other one uses
lockdep_assert_held() on that lock. Thus the lockdep_assert_held()
in thermal_zone_device_is_enabled() is redundant and it could be
dropped, but then the function would merely become a wrapper around
a simple tz->mode check that is more convenient to do directly.
Accordingly, drop thermal_zone_device_is_enabled() altogether and update
its callers to check tz->mode directly as appropriate.
While at it, combine the tz->mode and tz->suspended checks in
__thermal_zone_device_update() because they are of a similar category
and if any of them evaluates to "true", the outcome is the same.
No intentinal functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/9353673.CDJkKcVGEf@rjwysocki.net
The only case in which thermal_zone_device_set_polling() is called
with its second argument equal to zero is when passive cooling is
under way and passive_delay_jiffies is 0, which only happens when
the given thermal zone is not polled at all.
If monitor_thermal_zone() is modified to check passive_delay_jiffies
directly, the check of the thermal_zone_device_set_polling() second
argument against 0 can be dropped and a passive_delay check can be
dropped from thermal_zone_device_register_with_trips(), so change the
code accordingly.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/2004353.PYKUYFuaPT@rjwysocki.net
Since monitor_thermal_zone() is only called when the given thermal zone
has been enabled, as per the thermal_zone_device_is_enabled() check in
__thermal_zone_device_update(), the tz->mode check in it always
evaluates to "false" and the thermal_zone_device_set_polling()
invocation depending on it is dead code, so drop it.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/10547425.nUPlyArG6x@rjwysocki.net
Along the lines of commit 24aad192c6 ("thermal: core: Drop
redundant checks from thermal_bind_cdev_to_trip()") notice that
thermal_unbind_cdev_from_trip() is only called by
thermal_zone_cdev_unbind() under the thermal zone lock, so it
need not use lockdep_assert_held() for that lock.
No functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://patch.msgid.link/3341369.44csPzL39Z@rjwysocki.net
If a cooling device is registered after a thermal zone it should be
bound to and the trip point it should be bound to has already been
crossed by the zone temperature on the way up, the cooling device's
state may need to be adjusted, but the Bang-bang governor will not
do that because its .manage() callback only looks at thermal instances
for trip points whose thresholds are below or at the zone temperature.
Address this by updating bang_bang_manage() to look at all of the
uninitialized thermal instances and setting their target states in
accordance with the position of the zone temperature with respect to
the threshold of the given trip point.
Fixes: 5f64b4a1ab ("thermal: gov_bang_bang: Add .manage() callback")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/6103874.lOV4Wx5bFT@rjwysocki.net
Add sanity checks for new trip temperature and hysteresis values to
trip_point_temp_store() and trip_point_hyst_store() to prevent trip
point threshold from falling below THERMAL_TEMP_INVALID.
However, still allow user space to pass THERMAL_TEMP_INVALID as the
new trip temperature value to invalidate the trip if necessary.
Also allow the hysteresis to be updated when the temperature is invalid
to allow user space to avoid having to adjust hysteresis after a valid
temperature has been set, but in that case just change the value and do
nothing else.
Fixes: be0a3600aa ("thermal: sysfs: Rework the handling of trip point updates")
Cc: 6.8+ <stable@vger.kernel.org> # 6.8+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>
Link: https://patch.msgid.link/12528772.O9o76ZdvQC@rjwysocki.net
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
-----BEGIN PGP SIGNATURE-----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=dcCx
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=zjLL
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.12
This introduces support for the following devices:
- Lenovo Thinkpad T14s Gen 6
- Microsoft Surface Laptop 7 laptop
- Lenovo A6000
- Lenovo A6010
- Samsung Galaxy J3,
- Lenovo Vibe K5 (multiple variants)
- LG G4
IPQ5332 global clock controller is marked as an interconnect-provider,
and the USB interrupt triggers are corrected.
Touchscreen description is added to the Samsung Galaxy Core Prime and
Max, and touch keys are added to the Samsung Galaxy Grand Prime and
Galaxy Tab A.
Camera flash is added to BQ Aquaris M5 and X5.
The SD-card slot is described for the QCM6490 IDP.
For SA8775P CPU and LLCC bwmon is added, audio, compute and general
purpose DSP remoteprocs are added, with FastRPC on audio and compute
DSP. CPUidle states, capacity and DPC properties are added.
On SC8180X definitions for the multiport USB controller is introduced,
and enabled on the Lenovo Flex 5G to bring the camera to life. Power key
definitions are added as well.
The RGB camera sensor on the Lenovo ThinkPad X13s is described. PCIe
pinconf properties are cleaned up on this and the CRD. The four USB
Type-A ports found on the SA8295P ADP are enabled.
The modem subsystem remoteproc is introduced on the SDX75 and enabled on
the IDP device.
Camera, display and GPU clock controllers are added for the SM4450
platform.
On the F(x)tec Pro1X device, display, GPU, WiFi, RGB LED, SD-card,
remoteprocs, USB3 SuperSpeed, touchscreen, IO-expander, hall switch,
caps lock LED and camera button are introduced.
The camera clock controller is added to SM8150, and the GPU-only
"amd,imageon" compatible is dropped from the MTP device.
Refgen regulator for the DSI nodes of SM8350 is described, and the
display subsystem interconnect paths are corrected.
The camera control interface controllers are described on both SM8550
and SM8650. The bluetooth node on on SM8550 QRD, SM8650 QRD and SM8650
HDK are transitioned to the power sequence description. WiFi is added to
the SM8550 hardware development kit (HDK).
On the X1 Elite platform, one more UART, a DisplayPort PHY, the USB
multiport controller, a PCIe controller and PHY are added. Orientation
switching is wired up for the USB+DP PHYs. RPMh statistics node is
added. For the X1 Elite CRD the LID switch and the SDX65 modems are
introduced.
* tag 'qcom-arm64-for-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (120 commits)
arm64: dts: qcom: x1e80100: Fix PHY for DP2
arm64: dts: qcom: qcm6490-idp: Add SD Card node
arm64: dts: qcom: x1e80100: Add orientation-switch to all USB+DP QMP PHYs
arm64: dts: qcom: Add X1E78100 ThinkPad T14s Gen 6
dt-bindings: arm: qcom: Add Lenovo ThinkPad T14s Gen 6
Revert "arm64: dts: qcom: msm8939-longcheer-l9100: Add rear flash"
arm64: dts: qcom: Add support for X1-based Surface Laptop 7 devices
arm64: dts: qcom: x1e80100: Add UART2
arm64: dts: qcom: x1e80100-pmics: Add PMC8380C PWM
dt-bindings: arm: qcom: Add Surface Laptop 7 devices
arm64: dts: qcom: sm8150-mtp: drop incorrect amd,imageon
arm64: qcom: sa8775p: Add ADSP and CDSP0 fastrpc nodes
arm64: dts: qcom: x1e80100: Add USB Multiport controller
arm64: dts: qcom: sa8775p: fix the fastrpc label
arm64: dts: qcom: ipq5332: Add icc provider ability to gcc
dt-bindings: interconnect: Add Qualcomm IPQ5332 support
arm64: dts: qcom: sm8250: move lpass codec macros to use clks directly
arm64: dts: qcom: msm8998: Add disabled support for LPASS iommu for Q6
dt-bindings: clock: gcc-msm8998: Add Q6 and LPASS clocks definitions
arm64: dts: qcom: msm8976: Add restart node
...
Link: https://lore.kernel.org/r/20240904215752.24465-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Alexander Stein that improves imx93-tqma9352 board
support by adding PMIC, eMMC regulators, pad configurations, etc.
- A series from Benjamin Hahn that enables overlay for no Ethernet
device, TPM and PCIe support for imx8mp-phycore board
- A few changes from Fabio Estevam that fix dt-schema warnings for
i.MX8MM and i.MX93 based boards
- A series from Francesco Dolcini to add fxl6408 gpio expander, PMIC
thermal zone and USB3803 HUB for colibri-imx8x board
- A great number of changes from Frank Li that improve i.MX95 based with
many device additions, and fix dt-schema warnings on various i.MX8 and
layerscape device trees
- A series from João Paulo Gonçalves to add HDMI audio, analog input,
VPU, and sound card support for Toradex Verdin and Colibri boards
- A series from Markus Niebel to improve imx93-tqma9352 board support
- Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
- A couple of changes from Peng Fan to describe cache configuration for
i.MX93 SoC and add device tree for i.MX93-14x14-EVK board
- A series from Shengjiu Wang to improve various audio features for
imx93-11x11-evk board
- A series from Yashwanth Varakala to better describe regulator usage
for imx8mp-phyboard-pollux board
- Other random changes on various board device trees
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYbAAUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM5bwgf+OU349wE7hZZGHZoCYRymVORfiUXW
UtEBwRZiZFX/GH0iOYQZ8oqBtGvC+9M1Lpj4BBFAjSXjtKqPJVfwghwJ1Hw7ubs2
vG7pxtvYrhRDalxCAMpChciKmTJILlUtU2rkh3EKmUB3b5kzXXpV4T0lVHsY6oj7
Yutwi+qXqhKBhPImeCDf6uNbNon8Q3p4sWyeU7U5TprDW2E7zj4VCnAjO5/75emR
o7WvH+Qh4Ob8udazOiAlFj1yLVtLR119r4l1hzBII4tkxLPKQ/Fqf1T+KVEimUFi
SwreV0H0/C9sH1TxysqKer/bkmiKxzv8aV8m/3uSqRkEntoggz3k4Yy6Cw==
=LN+E
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rArD
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.12:
- A series from Alexander Stein that improves imx93-tqma9352 board
support by adding PMIC, eMMC regulators, pad configurations, etc.
- A series from Benjamin Hahn that enables overlay for no Ethernet
device, TPM and PCIe support for imx8mp-phycore board
- A few changes from Fabio Estevam that fix dt-schema warnings for
i.MX8MM and i.MX93 based boards
- A series from Francesco Dolcini to add fxl6408 gpio expander, PMIC
thermal zone and USB3803 HUB for colibri-imx8x board
- A great number of changes from Frank Li that improve i.MX95 based with
many device additions, and fix dt-schema warnings on various i.MX8 and
layerscape device trees
- A series from João Paulo Gonçalves to add HDMI audio, analog input,
VPU, and sound card support for Toradex Verdin and Colibri boards
- A series from Markus Niebel to improve imx93-tqma9352 board support
- Add support for Kontron i.MX93 OSM-S SoM and BL carrier board
- A couple of changes from Peng Fan to describe cache configuration for
i.MX93 SoC and add device tree for i.MX93-14x14-EVK board
- A series from Shengjiu Wang to improve various audio features for
imx93-11x11-evk board
- A series from Yashwanth Varakala to better describe regulator usage
for imx8mp-phyboard-pollux board
- Other random changes on various board device trees
* tag 'imx-dt64-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (121 commits)
arm64: dts: imx: rename gpio hog as <gpio name>-hog
arm64: dts: imx8mp-var-som-symphony: Add Variscite Symphony board and VAR-SOM-MX8MP SoM
arm64: dts: imx8mm-var-som: drop unused top-level compatible
arm64: dts: ls1088ardb: add new RTC PCF2131 support
arm64: dts: colibri-imx8x: Cleanup comments
arm64: dts: colibri-imx8x: Add 50mhz clock for eth
arm64: dts: colibri-imx8x: Add adma_pwm
arm64: dts: colibri-imx8x: Add vpu support
arm64: dts: colibri-imx8x: Add USB3803 HUB
arm64: dts: colibri-imx8x: Add PMIC thermal zone
arm64: dts: colibri-imx8x: Add sound card
arm64: dts: colibri-imx8x: Add fxl6408 gpio expander
arm64: dts: colibri-imx8x: Add analog inputs
arm64: dts: colibri-imx8x: Add usb support
arm64: dts: imx8qm-mek: add usb 3.0 and related type C nodes
arm64: dts: imx8qm-mek: add i2c in mipi[0,1] subsystem
arm64: dts: imx8qm-mek: add pwm and i2c in lvds subsystem
arm64: dts: imx8qm-mek: add cm4 remote-proc and related memory region
arm64: dts: imx8qm: add mipi subsystem
arm64: dts: imx8: add basic mipi subsystem
...
Link: https://lore.kernel.org/r/20240904143439.211552-5-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmbYVjoUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM7oPgf9FKYcNHDzVh4X2NFyPvqYJiJrq6tT
8Po/UvgymzF6DkYMw7vDWthYCiH9PUpjk3nP7kv+xSDq4YOfkHshVYbOwqBACeSb
XtP5vS9RIVGU6G2ZhQ+lYM3d9Uc3hCRBCRBuCzUg8p7msp0a0gIYQbEOL3bBfBcr
KwhOM8nF+LJ4/4L3MUjQPEJRmoHsFMSZXGvVEpFiHNKwh8qByW9j/cPNey1aIMpe
GY+/J71qyvEy/lXS081gdec+VM8Y3GpoDPq8EIOri2xqms1fwihIiAcpUNngR8PN
REXzRbk0uT9MUwPE794qZxqCb+W1etVUHVhdfxN29CjWW7CYf3yhB6ePrg==
=fPHr
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=QOO+
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX ARM device tree changes for 6.12:
- A series from Fabio Estevam to fix dt-schema warnings on i.MX23,
i.MX28 and i.MX27 device trees
- A bunch of changes from Krzysztof Kozlowski that corrects TQ Systems
DTS patterns in MAINTAINERS file and fix various dt-schema warnings
- A couple changes from Liu Ying to improve HDMI support on i.MX53 QSB
board
- A series from Lukasz Majewski to update imx28-lwe device tree, fixing
partition definitions, reducing SPI frequency and cleaning up SAIF
- A series from Markus Niebel to improve TQ-Systems device trees, adding
iio-hwmon device, using better compatible for LM75 temp sensor, moving
I2C3 pinmux to a better place
* tag 'imx-dt-6.12' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (27 commits)
ARM: dts: imx28-lwe: Remove saif[01] definitions
ARM: dts: imx28-lwe: Reduce maximal SPI frequency
ARM: dts: imx28-lwe: Fix partitions definitions
ARM: dts: imx6qdl: align pin config nodes with bindings
ARM: dts: imx6sl: align pin config nodes with bindings
ARM: dts: imx6ul: align pin config nodes with bindings
ARM: dts: imx6ul-tx6ul: drop empty pinctrl placeholder
ARM: dts: imx28-tx28: Fix the fsl,saif-master usage
ARM: dts: imx6ull-seeed-npi: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx6ul-geam: fix fsl,pins property in tscgrp pinctrl
ARM: dts: imx23/8: Rename apbh and apbx nodes
ARM: dts: imx6qdl-mba6b: remove doubled entry for I2C1 pinmux
ARM: dts: imx6qdl-mba6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: improve compatible for LM75 temp sensor
ARM: dts: imx6qdl-tqma6: move i2c3 pinmux to imx6qdl-tqma6b
ARM: dts: imx7d-sdb: align pin config nodes with bindings
ARM: dts: imx7: align pin config nodes with bindings
ARM: dts: imx7d-zii-rmu2: fix Ethernet PHY pinctrl property
MAINTAINERS: correct TQ Systems DTS patterns
ARM: dts: imx6: update spdif sound card node properties
...
Link: https://lore.kernel.org/r/20240904143439.211552-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
