Stop compiling sev.c when CONFIG_KVM_AMD_SEV=n, as the number of #ifdefs
in sev.c is getting ridiculous, and having #ifdefs inside of SEV helpers
is quite confusing.
To minimize #ifdefs in code flows, #ifdef away only the kvm_x86_ops hooks
and the #VMGEXIT handler. Stubs are also restricted to functions that
check sev_enabled and to the destruction functions sev_free_cpu() and
sev_vm_destroy(), where the style of their callers is to leave checks
to the callers. Most call sites instead rely on dead code elimination
to take care of functions that are guarded with sev_guest() or
sev_es_guest().
Signed-off-by: Sean Christopherson <seanjc@google.com>
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-3-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Leave SEV and SEV_ES '0' in kvm_cpu_caps by default, and instead set them
in sev_set_cpu_caps() if SEV and SEV-ES support are fully enabled. Aside
from the fact that sev_set_cpu_caps() is wildly misleading when it *clears*
capabilities, this will allow compiling out sev.c without falsely
advertising SEV/SEV-ES support in KVM_GET_SUPPORTED_CPUID.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240404121327.3107131-2-pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
On AMD and Hygon platforms, the local APIC does not automatically set
the mask bit of the LVTPC register when handling a PMI and there is
no need to clear it in the kernel's PMI handler.
For guests, the mask bit is currently set by kvm_apic_local_deliver()
and unless it is cleared by the guest kernel's PMI handler, PMIs stop
arriving and break use-cases like sampling with perf record.
This does not affect non-PerfMonV2 guests because PMIs are handled in
the guest kernel by x86_pmu_handle_irq() which always clears the LVTPC
mask bit irrespective of the vendor.
Before:
$ perf record -e cycles:u true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.001 MB perf.data (1 samples) ]
After:
$ perf record -e cycles:u true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.002 MB perf.data (19 samples) ]
Fixes: a16eb25b09 ("KVM: x86: Mask LVTPC when handling a PMI")
Cc: stable@vger.kernel.org
Signed-off-by: Sandipan Das <sandipan.das@amd.com>
Reviewed-by: Jim Mattson <jmattson@google.com>
[sean: use is_intel_compatible instead of !is_amd_or_hygon()]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240405235603.1173076-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add kvm_vcpu_arch.is_amd_compatible to cache if a vCPU's vendor model is
compatible with AMD, i.e. if the vCPU vendor is AMD or Hygon, along with
helpers to check if a vCPU is compatible AMD vs. Intel. To handle Intel
vs. AMD behavior related to masking the LVTPC entry, KVM will need to
check for vendor compatibility on every PMI injection, i.e. querying for
AMD will soon be a moderately hot path.
Note! This subtly (or maybe not-so-subtly) makes "Intel compatible" KVM's
default behavior, both if userspace omits (or never sets) CPUID 0x0 and if
userspace sets a completely unknown vendor. One could argue that KVM
should treat such vCPUs as not being compatible with Intel *or* AMD, but
that would add useless complexity to KVM.
KVM needs to do *something* in the face of vendor specific behavior, and
so unless KVM conjured up a magic third option, choosing to treat unknown
vendors as neither Intel nor AMD means that checks on AMD compatibility
would yield Intel behavior, and checks for Intel compatibility would yield
AMD behavior. And that's far worse as it would effectively yield random
behavior depending on whether KVM checked for AMD vs. Intel vs. !AMD vs.
!Intel. And practically speaking, all x86 CPUs follow either Intel or AMD
architecture, i.e. "supporting" an unknown third architecture adds no
value.
Deliberately don't convert any of the existing guest_cpuid_is_intel()
checks, as the Intel side of things is messier due to some flows explicitly
checking for exactly vendor==Intel, versus some flows assuming anything
that isn't "AMD compatible" gets Intel behavior. The Intel code will be
cleaned up in the future.
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20240405235603.1173076-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
strncpy() is deprecated for use on NUL-terminated destination strings
[1] and as such we should prefer more robust and less ambiguous string
interfaces.
We know that info-device should be NUL-terminated based on its use with
strlen():
| static int __init mtdpstore_init(void)
| {
| int ret;
| struct mtdpstore_context *cxt = &oops_cxt;
| struct pstore_blk_config *info = &cxt->info;
|
| ret = pstore_blk_get_config(info);
| if (unlikely(ret))
| return ret;
|
| if (strlen(info->device) == 0) {
| pr_err("mtd device must be supplied (device name is empty)\n");
...
Considering the above, a suitable replacement is `strscpy` [2] due to
the fact that it guarantees NUL-termination on the destination buffer.
Note that this patch relies on the _new_ 2-argument version of strscpy()
introduced in Commit e6584c3964 ("string: Allow 2-argument strscpy()").
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#strncpy-on-nul-terminated-strings [1]
Link: https://manpages.debian.org/testing/linux-manual-4.8/strscpy.9.en.html [2]
Link: https://github.com/KSPP/linux/issues/90
Cc: <linux-hardening@vger.kernel.org>
Signed-off-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240328-strncpy-fs-pstore-blk-c-v1-1-5748cdc22a53@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses mutex which was destroyed already
in module's remove() so use devm API instead.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-9-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses mutex which was destroyed already
in module's remove() so use devm API instead.
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-8-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-7-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-6-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Also drop explicit turning LEDs off from remove() due to they will be off
anyway by led_classdev_unregister().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-5-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240411161032.609544-4-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
Link: https://lore.kernel.org/r/20240411161032.609544-3-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
Using of devm API leads to a certain order of releasing resources.
So all dependent resources which are not devm-wrapped should be deleted
with respect to devm-release order. Mutex is one of such objects that
often is bound to other resources and has no own devm wrapping.
Since mutex_destroy() actually does nothing in non-debug builds
frequently calling mutex_destroy() is just ignored which is safe for now
but wrong formally and can lead to a problem if mutex_destroy() will be
extended so introduce devm_mutex_init().
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: George Stark <gnstark@salutedevices.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Acked-by: Waiman Long <longman@redhat.com>
Link: https://lore.kernel.org/r/20240411161032.609544-2-gnstark@salutedevices.com
Signed-off-by: Lee Jones <lee@kernel.org>
Currently, if a Kconfig option depends on TASKS_RCU, it conditionally does
"select TASKS_RCU if PREEMPTION". This works, but requires any change in
this enablement logic to be replicated across all such "select" clauses.
A new NEED_TASKS_RCU Kconfig option has been created to allow this
enablement logic to be in one place in kernel/rcu/Kconfig.
Therefore, select the new NEED_TASKS_RCU Kconfig option instead of the
old TASKS_RCU option.
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: <linux-trace-kernel@vger.kernel.org>
Cc: Ankur Arora <ankur.a.arora@oracle.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Currently, all ASoC systems are set to use VPMON for DSP1RX5_SRC,
however, this is required only for internal boost systems.
External boost systems require VBSTMON instead of VPMON to be the
input to DSP1RX5_SRC.
Shared Boost Active acts like Internal boost (requires VPMON).
Shared Boost Passive acts like External boost (requires VBSTMON)
All systems require DSP1RX6_SRC to be set to VBSTMON.
Signed-off-by: Stefan Binding <sbinding@opensource.cirrus.com>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://msgid.link/r/20240411142648.650921-1-sbinding@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add "sched_prepare_exec" tracepoint, which is run right after the point
of no return but before the current task assumes its new exec identity.
Unlike the tracepoint "sched_process_exec", the "sched_prepare_exec"
tracepoint runs before flushing the old exec, i.e. while the task still
has the original state (such as original MM), but when the new exec
either succeeds or crashes (but never returns to the original exec).
Being able to trace this event can be helpful in a number of use cases:
* allowing tracing eBPF programs access to the original MM on exec,
before current->mm is replaced;
* counting exec in the original task (via perf event);
* profiling flush time ("sched_prepare_exec" to "sched_process_exec").
Example of tracing output:
$ cat /sys/kernel/debug/tracing/trace_pipe
<...>-379 [003] ..... 179.626921: sched_prepare_exec: interp=/usr/bin/sshd filename=/usr/bin/sshd pid=379 comm=sshd
<...>-381 [002] ..... 180.048580: sched_prepare_exec: interp=/bin/bash filename=/bin/bash pid=381 comm=sshd
<...>-385 [001] ..... 180.068277: sched_prepare_exec: interp=/usr/bin/tty filename=/usr/bin/tty pid=385 comm=bash
<...>-389 [006] ..... 192.020147: sched_prepare_exec: interp=/usr/bin/dmesg filename=/usr/bin/dmesg pid=389 comm=bash
Signed-off-by: Marco Elver <elver@google.com>
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Link: https://lore.kernel.org/r/20240411102158.1272267-1-elver@google.com
Signed-off-by: Kees Cook <keescook@chromium.org>
The synchronize_rcu() call is going to be reworked, thus
this patch adds dedicated fields into the rcu_state structure.
Reviewed-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Uladzislau Rezki (Sony) <urezki@gmail.com>
Advertize more suitable cursor sizes via the new SIZE_HINTS
plane property.
We can't really enumerate all supported cursor sizes on
the platforms where the cursor height can vary freely, so
for simplicity we'll just expose all square+POT sizes between
each platform's min and max cursor limits.
Depending on the platform this will give us one of three
results:
- 64x64,128x128,256x256,512x512
- 64x64,128x128,256x256
- 64x64
Cc: Simon Ser <contact@emersion.fr>
Cc: Jonas Ådahl <jadahl@redhat.com>
Cc: Daniel Stone <daniel@fooishbar.org>
Cc: Sameer Lattannavar <sameer.lattannavar@intel.com>
Cc: Sebastian Wick <sebastian.wick@redhat.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318204408.9687-3-ville.syrjala@linux.intel.com
Reviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>
Add a new immutable plane property by which a plane can advertise
a handful of recommended plane sizes. This would be mostly exposed
by cursor planes as a slightly more capable replacement for
the DRM_CAP_CURSOR_WIDTH/HEIGHT caps, which can only declare
a one size fits all limit for the whole device.
Currently eg. amdgpu/i915/nouveau just advertize the max cursor
size via the cursor size caps. But always using the max sized
cursor can waste a surprising amount of power, so a better
strategy is desirable.
Most other drivers don't specify any cursor size at all, in
which case the ioctl code just claims that 64x64 is a great
choice. Whether that is actually true is debatable.
A poll of various compositor developers informs us that
blindly probing with setcursor/atomic ioctl to determine
suitable cursor sizes is not acceptable, thus the
introduction of the new property to supplant the cursor
size caps. The compositor will now be free to select a
more optimal cursor size from the short list of options.
Note that the reported sizes (either via the property or the
caps) make no claims about things such as plane scaling. So
these things should only really be consulted for simple
"cursor like" use cases.
Userspace consumer in the form of mutter seems ready:
https://gitlab.gnome.org/GNOME/mutter/-/merge_requests/3165
v2: Try to add some docs
v3: Specify that value 0 is reserved for future use (basic idea from Jonas)
Drop the note about typical hardware (Pekka)
v4: Update the docs to indicate the list is "in order of preference"
Add a a link to the mutter MR
v5: Limit to cursors only for now (Simon)
Cc: Jonas Ådahl <jadahl@redhat.com>
Cc: Sameer Lattannavar <sameer.lattannavar@intel.com>
Reviewed-by: Sebastian Wick <sebastian.wick@redhat.com>
Reviewed-by: Simon Ser <contact@emersion.fr>
Acked-by: Daniel Stone <daniels@collabora.com>
Acked-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Pekka Paalanen <pekka.paalanen@collabora.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240318204408.9687-2-ville.syrjala@linux.intel.com
This patch adds a new helper chk_msk_info() to show the counters in
mptcp_info of the given info, and check that the timestamps move
forward. Use it to show newly added last_data_sent, last_data_recv
and last_ack_recv in mptcp_info in chk_last_time_info().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240410-upstream-net-next-20240405-mptcp-last-time-info-v2-2-f95bd6b33e51@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds "last time" fields last_data_sent, last_data_recv and
last_ack_recv in struct mptcp_sock to record the last time data_sent,
data_recv and ack_recv happened. They all are initialized as
tcp_jiffies32 in __mptcp_init_sock(), and updated as tcp_jiffies32 too
when data is sent in __subflow_push_pending(), data is received in
__mptcp_move_skbs_from_subflow(), and ack is received in ack_update_msk().
Similar to tcpi_last_data_sent, tcpi_last_data_recv and tcpi_last_ack_recv
exposed with TCP, this patch exposes the last time "an action happened" for
MPTCP in mptcp_info, named mptcpi_last_data_sent, mptcpi_last_data_recv and
mptcpi_last_ack_recv, calculated in mptcp_diag_fill_info() as the time
deltas between now and the newly added last time fields in mptcp_sock.
Since msk->last_ack_recv needs to be protected by mptcp_data_lock/unlock,
and lock_sock_fast can sleep and be quite slow, move the entire
mptcp_data_lock/unlock block after the lock/unlock_sock_fast block.
Then mptcpi_last_data_sent and mptcpi_last_data_recv are set in
lock/unlock_sock_fast block, while mptcpi_last_ack_recv is set in
mptcp_data_lock/unlock block, which is protected by a spinlock and
should not block for too long.
Also add three reserved bytes in struct mptcp_info not to have holes in
this structure exposed to userspace.
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/446
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240410-upstream-net-next-20240405-mptcp-last-time-info-v2-1-f95bd6b33e51@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Erick Archer says:
====================
mana: Add flex array to struct mana_cfg_rx_steer_req_v2 (part)
The "struct mana_cfg_rx_steer_req_v2" uses a dynamically sized set of
trailing elements. Specifically, it uses a "mana_handle_t" array. So,
use the preferred way in the kernel declaring a flexible array [1].
At the same time, prepare for the coming implementation by GCC and Clang
of the __counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time via
CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE (for
strcpy/memcpy-family functions).
Also, avoid the open-coded arithmetic in the memory allocator functions
[2] using the "struct_size" macro.
Moreover, use the "offsetof" helper to get the indirect table offset
instead of the "sizeof" operator and avoid the open-coded arithmetic in
pointers using the new flex member. This new structure member also allow
us to remove the "req_indir_tab" variable since it is no longer needed.
Now, it is also possible to use the "flex_array_size" helper to compute
the size of these trailing elements in the "memcpy" function.
Specifically, the first commit adds the flex member and the patches 2 and
3 refactor the consumers of the "struct mana_cfg_rx_steer_req_v2".
This code was detected with the help of Coccinelle, and audited and
modified manually. The Coccinelle script used to detect this code pattern
is the following:
virtual report
@rule1@
type t1;
type t2;
identifier i0;
identifier i1;
identifier i2;
identifier ALLOC =~ "kmalloc|kzalloc|kmalloc_node|kzalloc_node|vmalloc|vzalloc|kvmalloc|kvzalloc";
position p1;
@@
i0 = sizeof(t1) + sizeof(t2) * i1;
...
i2 = ALLOC@p1(..., i0, ...);
@script:python depends on report@
p1 << rule1.p1;
@@
msg = "WARNING: verify allocation on line %s" % (p1[0].line)
coccilib.report.print_report(p1[0],msg)
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#zero-length-and-one-element-arrays [1]
Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [2]
v1: https://lore.kernel.org/linux-hardening/AS8PR02MB7237974EF1B9BAFA618166C38B382@AS8PR02MB7237.eurprd02.prod.outlook.com/
v2: https://lore.kernel.org/linux-hardening/AS8PR02MB723729C5A63F24C312FC9CD18B3F2@AS8PR02MB7237.eurprd02.prod.outlook.com/
====================
Link: https://lore.kernel.org/r/AS8PR02MB72374BD1B23728F2E3C3B1A18B022@AS8PR02MB7237.eurprd02.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Deduplicate ->read() callbacks of bin_attributes which are backed by a
simple buffer in memory:
Use the newly introduced sysfs_bin_attr_simple_read() helper instead,
either by referencing it directly or by declaring such bin_attributes
with BIN_ATTR_SIMPLE_RO() or BIN_ATTR_SIMPLE_ADMIN_RO().
Aside from a reduction of LoC, this shaves off a few bytes from vmlinux
(304 bytes on an x86_64 allyesconfig).
No functional change intended.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Acked-by: Zhi Wang <zhiwang@kernel.org>
Acked-by: Michael Ellerman <mpe@ellerman.id.au>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/92ee0a0e83a5a3f3474845db6c8575297698933a.1712410202.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When drivers expose a bin_attribute in sysfs which is backed by a buffer
in memory, a common pattern is to set the @private and @size members in
struct bin_attribute to the buffer's location and size.
The ->read() callback then merely consists of a single memcpy() call.
It's not even necessary to perform bounds checks as these are already
handled by sysfs_kf_bin_read().
However each driver is so far providing its own ->read() implementation.
The pattern is sufficiently frequent to merit a public helper, so add
sysfs_bin_attr_simple_read() as well as BIN_ATTR_SIMPLE_RO() and
BIN_ATTR_SIMPLE_ADMIN_RO() macros to ease declaration of such
bin_attributes and reduce LoC and .text section size.
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/5ed62b197a442ec6db53d8746d9d806dd0576e2d.1712410202.git.lukas@wunner.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Newer Qualcomm SoCs like X1E80100 might come with four speakers spread
over two Soundwire controllers, thus they need a multi-link Soundwire
stream runtime.
Cc: Mark Brown <broonie@kernel.org>
Cc: alsa-devel@alsa-project.org
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240405144141.47217-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
RING_CONTEXT_CONTROL is a masked register.
v2: Also clean up setting register value (Lucas)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240404161256.3852502-1-ashutosh.dixit@intel.com
(cherry picked from commit dc30c6e714)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Addressing potential overflow in result of multiplication of two lower
precision (u32) operands before widening it to higher precision
(u64).
-v2
Fix commit message and description. (Rodrigo)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240401175300.3823653-1-himal.prasad.ghimiray@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit 34820967ae)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Address potential overflow in result of left shift of a
lower precision (u32) operand before assignment to higher
precision (u64) variable.
v2:
- Update commit message. (Himal)
Fixes: 4446fcf220 ("drm/xe/hwmon: Expose power1_max_interval")
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Anshuman Gupta <anshuman.gupta@intel.com>
Cc: Badal Nilawar <badal.nilawar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405130127.1392426-5-karthik.poosa@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 883232b47b)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
All of these mutexes are already initialized by the display side since
commit 3fef3e6ff8 ("drm/i915: move display mutex inits to display
code"), so the xe shouldn´t initialize them.
Fixes: 44e694958b ("drm/xe/display: Implement display support")
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Arun R Murthy <arun.r.murthy@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240405200711.2041428-1-lucas.demarchi@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 117de185ed)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
The atomisp driver's Android heritage makes it weird in that
even though it uses MC + subdev-s it is designed to primarily
be controlled through its /dev/video# node.
It implements s_input() on /dev/video# to select which sensor to use,
while ignoring link_setup() calls to enable a link to another sensor.
Add support for selecting the active sensor the MC way by adding
link_setup() support.
The implementation is a bit convoluted due to the atomisp driver's
heritage.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The link from the ISP's source pad to the /dev/video# output v4l2-dev
is always enabled and immutable, mark it as such.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Change the generic "ATOMISP_SUBDEV" name to "ATOM ISP" to make clear
that this is the subdev for the ISP itself.
Reviewed-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Add DMABUF support and while at it drop userptr support.
Now that atomisp has been ported to videobuf2 this is trivial.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Stop setting sd->devnode for the ATOMISP_SUBDEV v4l2-subdev, so that
a proper /dev/v4l-subdev# gets created for it.
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Drop all ISP controls and ioctls which just get passed through
to the camera subdev. Instead these calls should be done directly
at the sensor subdev.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Remove the custom VCM handling, instead the VCM should be controlled
through its own v4l2-subdev and the new ipu-bridge.c code already
supports instantiating an i2c_client for this and setting up
the necessary endpoints in the fwnode graph.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Rename atomisp_set_crop_and_fmt() to atomisp_set_sensor_crop_and_fmt()
to make clear that it operates on the sensor subdev.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
isp_subdev_propagate() is a wrapper around atomisp_subdev_set_selection()
which gets only used in a single place.
Call atomisp_subdev_set_selection() directly in that single place instead.
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
The allocation failure of mycs->yuv_scaler_binary in load_video_binaries()
is followed with a dereference of mycs->yuv_scaler_binary after the
following call chain:
sh_css_pipe_load_binaries()
|-> load_video_binaries(mycs->yuv_scaler_binary == NULL)
|
|-> sh_css_pipe_unload_binaries()
|-> unload_video_binaries()
In unload_video_binaries(), it calls to ia_css_binary_unload with argument
&pipe->pipe_settings.video.yuv_scaler_binary[i], which refers to the
same memory slot as mycs->yuv_scaler_binary. Thus, a null-pointer
dereference is triggered.
Link: https://lore.kernel.org/r/20240118151303.3828292-1-alexious@zju.edu.cn
Fixes: a49d25364d ("staging/atomisp: Add support for the Intel IPU v2")
Signed-off-by: Zhipeng Lu <alexious@zju.edu.cn>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
s/is not unsupported/is not supported/ in the unsupported revision
error.
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
This will remove devcoredump from file system and free its resources
during driver unload.
This fix the driver unload after gpu hang happened, otherwise this
it would report that Xe KMD is still in use and it would leave the
kernel in a state that Xe KMD can't be unload without a reboot.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Acked-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409200206.108452-2-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
It is useful for modules that do not want to keep coredump available
after its unload.
Otherwise, the coredump would only be removed after DEVCD_TIMEOUT
seconds.
v2:
- dev_coredump_put() documentation updated (Mukesh)
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Acked-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240409200206.108452-1-jose.souza@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The early 64-bit boot code must be entered with a 1:1 mapping of the
bootable image, but it cannot operate without a 1:1 mapping of all the
assets in memory that it accesses, and therefore, it creates such
mappings for all known assets upfront, and additional ones on demand
when a page fault happens on a memory address.
These mappings are created with the global bit G set, as the flags used
to create page table descriptors are based on __PAGE_KERNEL_LARGE_EXEC
defined by the core kernel, even though the context where these mappings
are used is very different.
This means that the TLB maintenance carried out by the decompressor is
not sufficient if it is entered with CR4.PGE enabled, which has been
observed to happen with the stage0 bootloader of project Oak. While this
is a dubious practice if no global mappings are being used to begin
with, the decompressor is clearly at fault here for creating global
mappings and not performing the appropriate TLB maintenance.
Since commit:
f97b67a773 ("x86/decompressor: Only call the trampoline when changing paging levels")
CR4 is no longer modified by the decompressor if no change in the number
of paging levels is needed. Before that, CR4 would always be set to a
consistent value with PGE cleared.
So let's reinstate a simplified version of the original logic to put CR4
into a known state, and preserve the PAE, MCE and LA57 bits, none of
which can be modified freely at this point (PAE and LA57 cannot be
changed while running in long mode, and MCE cannot be cleared when
running under some hypervisors).
This effectively clears PGE and works around the project Oak bug.
Fixes: f97b67a773 ("x86/decompressor: Only call the trampoline when ...")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Link: https://lore.kernel.org/r/20240410151354.506098-2-ardb+git@google.com
It's better to parse the code when the usual pattern is being used,
i.e. checking for error condition first.
There is no functional or code generation change (tested in LLVM).
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
The acpi_get_gpiod_by_index() never is called with adev being NULL.
Remove the redundant check.
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmYTAJYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG2bEH/jOBXd0ZCz+s9+F4
TbSvDEE8UjitQdEJ5WSBY9CEvFI8OuVQr23gYPUn+gfgqLX0Vsp8HfxL6bBP5Tj6
DSzAkwF/mvIfa6VLFmO1GmvyhYtmWkmbM825tNqKHSNTBc9cCLH3H+780wNtTMwQ
VkB8O3KS/wZBGKSbFfiXW+fT3SkWIMLtdBAaox+vcxHXpiluXxSbxANRD5kTbdG0
UAW9S4+3A0jNk/KeXEvJDqkf7C3ASsjtNPbK+gFDfOXxdNYFTC2IUf93rL61VB4s
C2rtUklcLE8gFDtvkQ8JtGWmDj4pWPEDIyhICKlzP/aKCjXcNzLaoM0GJQYJS+PN
aNevw24=
=318J
-----END PGP SIGNATURE-----
Merge tag 'v6.9-rc3' into x86/boot, to pick up fixes before queueing up more changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This corresponds to the NT syscall NtReleaseSemaphore().
This increases the semaphore's internal counter by the given value, and returns
the previous value. If the counter would overflow the defined maximum, the
function instead fails and returns -EOVERFLOW.
Signed-off-by: Elizabeth Figura <zfigura@codeweavers.com>
Link: https://lore.kernel.org/r/20240329000621.148791-4-zfigura@codeweavers.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>