mbox_send_message() sends a u32 bit message, not a pointer to a message.
We only convert to a pointer type as a generic type. If we want to send
a dummy message of 0, then simply send 0 (NULL).
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240325165507.30323-1-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Instead of optimizing NOPs in-place, use a temporary buffer like the
usual alternatives patching flow does. This obviates the need to grab
locks when patching, see
6778977590 ("x86/alternatives: Disable interrupts and sync when optimizing NOPs in place")
While at it, add nomenclature definitions clarifying and simplifying the
naming of function-local variables in the alternatives code.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20240130105941.19707-2-bp@alien8.de
This property was only ever used in one device. It is no longer needed as
what it signaled is now default. Remove this unneeded/unused property.
Signed-off-by: Andrew Davis <afd@ti.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240326223730.54639-5-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
The property ti,system-reboot-controller is no longer needed as the reboot
handler is now always registered. Remove this property.
While here remove the comment about delete-property, all K2G platforms use
PMMC, and it wasn't good advice anyway.
Signed-off-by: Andrew Davis <afd@ti.com>
Link: https://lore.kernel.org/r/20240326223730.54639-4-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
There was once a limitation that there could only be one system
reset handler. Due to that we only would register this handler
when a non-standard device tree property was found, else we left
the default handler in place (usually PSCI). Now that we can
have multiple handlers, and TI-SCI reset is always available
in the firmware, register this handler unconditionally.
This priority is left at the default so higher priority handlers
(like PSCI) are still attempted first.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20240326223730.54639-3-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
Use device life-cycle managed register function to simplify probe.
Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Gabriel Somlo <gsomlo@gmail.com>
Reviewed-by: Markus Schneider-Pargmann <msp@baylibre.com>
Link: https://lore.kernel.org/r/20240326223730.54639-2-afd@ti.com
Signed-off-by: Nishanth Menon <nm@ti.com>
After alternatives have been patched, changes to the X86_FEATURE flags
won't take effect and could potentially even be wrong.
Warn about it.
This is something which has been long overdue.
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Srikanth Aithal <sraithal@amd.com>
Link: https://lore.kernel.org/r/20240327154317.29909-3-bp@alien8.de
McBSP's data delay can be configured from 0 to 2 bit clock periods. 0 is
used for DSP_B format, 1 is used for DSP_A format, 2 is unused.
A data delay of 2 bit clock periods can be used to interface to
'T1 framing' devices where data stream is preceded by a 'framing bit'. On
transmission, McBSP inserts a blank period (high-impedance period)
before the first data bit to leave an opportunity for other devices to
set this 'framing bit'. On reception, McBSP discards the 'framing bit'
that precedes the data stream.
Add support for the 'framing bit' according to the
'ti,T1-framing-[tx/rx]' device-tree properties. If a flag is present,
the data delay is set to 2 bit clock periods regardless of the selected
DAI format.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-14-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP's data delay can be configured from 0 to 2 bit clock periods. 0 is
used for DSP_B format, 1 for DSP_A format. A data delay of 2 bit clock
periods can be used to interface to 'T1 framing' devices where data
stream is preceded by a 'framing bit'. This 2 bit clock data delay is
not described in the bindings.
Add two flags 'ti,T1-framing-[rx/tx]' to enable a data delay of 2
bit clock periods in reception or transmission.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-13-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
S24_LE is supported by McBSP but not by the driver.
Add S24_LE to driver's supported formats. Using it enables the sign
extension in DRR (Data Receive Register). The other formats are kept
with the zero extension in DRR.
Remove data_type table as it is no longer used.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-12-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP has free-running mode where serial clocks continue to run during
emulation halts. This mode is always enabled by the driver.
Set free-running mode when SND_SOC_DAIFMT_CONT is selected by DAI
format, unset it when SND_SOC_DAIFMT_GATED is selected.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-11-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP can generate a SYNCERR when unexpected frame pulses are
detected. The driver always disables this feature and ignore the
unexpected frame pulses.
Enable the generation of SYNCERR by the McBSP. Unexpected frame
pulses are not ignored anymore.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-10-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP is able to drive bit clock and consume frame clock but BP_FC
format is not handled by McBSP driver.
Add BP_FC format support.
When BP_FC is selected:
- CLKX and CLKR are configured as outputs
- The sample rate generator is configured to be able to provide bit
clock.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-9-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
TDM is not supported by the McBSP driver. The McBSP datasheet does not
name explicitly TDM as a supported format but it is possible to configure
the McBSP to do TDM if all slots are used by McBSP.
Add TDM support. It uses single-phase frame. Slot width is used to
compute the McBSP's word length.
Implement the set_tdm_slot() hook of snd_soc_dai_ops struct. It only
supports TDM if all slots are used by McBSP.
The snd_soc_dai_driver's channels_max is updated from 2 to 128.
This was tested with BP_FC format on a platform designed off of
DAVINCI/OMAP_L138. A check is done in davinci_i2s_set_dai_fmt() to
prevent TDM to be used with BC_FC and BC_FP formats.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-8-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In davinci_i2s_hw_params(), mcbsp_word_length is set twice to
asp_word_length[fmt].
Remove second unnecessary assignment.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-7-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
McBSP's internal sample rate generator can be programed to be driven by
its internal clock or by an external clock source located on CLKS pin.
The external clock source case is not handled by the driver.
Handle an optional clock related to this external clock source. If
present, the driver uses the clock located on CLKS pin as input for the
sample rate generator. Thus, the external clock rate is used to compute
divisors. If this optional clock is not present, the sample rate
generator is driven by the McBSP's functional clock.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-6-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In probe(), the dev_err() is used for every returned error.
Replace dev_err() with dev_err_probe() where -EPROBE_DEFER can be
returned.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-5-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The clk_input_pin attribute of davinci_mcbsp_dev struct is not set since
commit 257ade78b6 ("ASoC: davinci-i2s: Convert to use edma-pcm").
Remove the attribute.
Keep the behaviour of the MCBSP_CLKR case as MCBSP_CLKR == 0.
I can't test the BC_FP format so I added back the initial comment that
was removed by commit ec63755337 ("ASoC: DaVinci: Added selection of
clk input pin for McBSP"). This was the last dependency to
linux/platform_data/davinci_asp.h so it is not included anymore.
Remove the enum mcbsp_clk_input_pin from davinci_asp.h as it is not used
anywhere else.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-4-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The McBSP uses an internal sample rate generator to provide bit clock
or frame clock. This sample rate generator can be programmed to be
driven by McBSP's internal clock source or by an external clock source
(located on CLKS pin). The external clock source is not described in
the bindings.
Add an optional clock item that allows to select an external clock as
sample rate generator's input.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-3-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Convert the binding for McBSP controllers for TI SoCs from txt
to YAML schema.
Add properties 'clocks', 'clock-names', 'power-domains' and
'#sound-dai-cells' which were missing from the txt file.
Add '#sound-dai-cells' and 'clocks' in the example which were missing
from the txt file.
Signed-off-by: Bastien Curutchet <bastien.curutchet@bootlin.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com>
Link: https://msgid.link/r/20240402071213.11671-2-bastien.curutchet@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
gcc-10 warns about a strncpy() that does not enforce zero-termination:
In file included from include/linux/string.h:369,
from drivers/staging/greybus/fw-management.c:9:
In function 'strncpy',
inlined from 'fw_mgmt_backend_fw_update_operation' at drivers/staging/greybus/fw-management.c:306:2:
include/linux/fortify-string.h:108:30: error: '__builtin_strncpy' specified bound 10 equals destination size [-Werror=stringop-truncation]
108 | #define __underlying_strncpy __builtin_strncpy
| ^
include/linux/fortify-string.h:187:9: note: in expansion of macro '__underlying_strncpy'
187 | return __underlying_strncpy(p, q, size);
| ^~~~~~~~~~~~~~~~~~~~
For some reason, I cannot reproduce this with gcc-9 or gcc-11, and I only
get a warning for one of the four related strncpy()s, so I'm not
sure what's going on.
Change all four to strscpy_pad(), which is the safest replacement here,
as it avoids ending up with uninitialized stack data in the tag name.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://github.com/KSPP/linux/issues/90 [1]
Link: https://lore.kernel.org/r/20240408194821.3183462-3-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
gcc-9 complains about a possibly unterminated string in the strncpy() destination:
In function 'rtw_cfg80211_add_monitor_if',
inlined from 'cfg80211_rtw_add_virtual_intf' at drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2209:9:
drivers/staging/rtl8723bs/os_dep/ioctl_cfg80211.c:2146:2: error: 'strncpy' specified bound 16 equals destination size [-Werror=stringop-truncation]
2146 | strncpy(mon_ndev->name, name, IFNAMSIZ);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
This one is a false-positive because of the explicit termination in the following
line, and recent versions of clang and gcc no longer warn about this.
Interestingly, the other strncpy() in this file is missing a termination but
does not produce a warning, possibly because of the type confusion and the
cast between u8 and char.
Change both strncpy() instances to strscpy(), which avoids the warning as well
as the possibly missing termination. No additional padding is needed here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://github.com/KSPP/linux/issues/90
Reviewed-by: Justin Stitt <justinstitt@google.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240408194821.3183462-2-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When -Wstringop-truncation is enabled, gcc finds a function that
always does a short copy:
In function 'inquiry',
inlined from 'rtsx_scsi_handler' at drivers/staging/rts5208/rtsx_scsi.c:3210:12:
drivers/staging/rts5208/rtsx_scsi.c:526:17: error: 'strncpy' output truncated copying between 1 and 28 bytes from a string of length 28 [-Werror=stringop-truncation]
526 | strncpy(buf + 8, inquiry_string, sendbytes - 8);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
The code originally had a memcpy() that would overread the source string,
and commit 88a5b39b69 ("staging/rts5208: Fix read overflow in memcpy")
fixed this but introduced the warning about truncation in the process.
As Dan points out, the final space in the inquiry_string always gets
cut off, so remove it here for clarity, leaving exactly the 28 non-NUL
characters that can get copied into the output. In the 'pro_formatter_flag'
this is followed by another 20 bytes from the 'formatter_inquiry_str'
array, but there the output never contains a NUL-termination, and the
length is known, so memcpy() is the more logical choice.
Cc: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/lkml/695be581-548f-4e5e-a211-5f3b95568e77@moroto.mountain/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Justin Stitt <justinstitt@google.com>
Link: https://lore.kernel.org/r/20240408194821.3183462-1-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported by checkpatch:
CHECK: Macro argument 'gcam' may be better as '(gcam)' to avoid
precedence issues
Inline standard calls to 'dev_*' kernel logging functions, in favor
of 'gcam_*' macros, to clear up gcam-related logging.
Signed-off-by: Jackson Chui <jacksonchui.qwerty@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/ZhRzWNiak1qOdJLL@jc-ubuntu-dev-korn-1
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
debugfs_remove was called out of order.
Ensure pi433 init & exit have reverse function calls order.
Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-8-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
debugfs resources were never cleaned in case of failure to register driver.
Reported-by Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 4ef027d5a3 ("staging: pi433: add debugfs interface")
Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-7-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pi433_init had "unregister_chrdev" called twice.
Remove it using goto statements.
Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-6-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Distinguish struct device type instances from dev_t instances
to enhance readability.
Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-5-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
pi433_receive is only called once.
It immediately assigns the data param to a struct pi433_device.
Rename param name to pi433.
Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-4-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Just as other devices use specific names for instantiation,
struct_pi433 should also have a distinct name.
Moreover, some other structs use the "dev" or "device" in their naming
conventions for members, which can be confusing.
Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-3-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Driver holds buffers in different structs, as does the HW.
Using explicit names for buffers increases readability.
Signed-off-by: Shahar Avidar <ikobh7@gmail.com>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240405074000.3481217-2-ikobh7@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add terminating new line to the Kconfig file. It helps while
displaying file with cat(1) command.
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Acked-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/20240330040411.3273337-1-ppandit@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The arche-ctrl has two platform drivers and three of_device_id tables,
but one table is only used for the the module loader, while the other
two seem to be associated with their drivers.
This leads to a W=1 warning when the driver is built-in:
drivers/staging/greybus/arche-platform.c:623:34: error: 'arche_combined_id' defined but not used [-Werror=unused-const-variable=]
623 | static const struct of_device_id arche_combined_id[] = {
Drop the extra table and register both tables that are actually
used as the ones for the module loader instead.
Fixes: 7b62b61c75 ("greybus: arche-ctrl: Don't expose driver internals to arche-platform driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20240403080702.3509288-18-arnd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit corrects the spelling of "initialisation" which was
misspelled as "intialisation" in the irqreturn_t nvec_interrupt()
documentation.
The issue was found using checkpatch.
Signed-off-by: Dorine Tipo <dorine.a.tipo@gmail.com>
Link: https://lore.kernel.org/r/20240331170548.81409-1-dorine.a.tipo@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Variable byData is being assigned a value that is never read, it is
being re-assigned later on. The assignment is redundant and can be
removed.
Cleans up clang scan build warning:
drivers/staging/vt6655/srom.c:67:2: warning: Value stored to 'byData'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Tested-by: Philipp Hortmann <philipp.g.hortmann@gmail.com>
Link: https://lore.kernel.org/r/20240328111557.761380-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
check_timer_distribution() runs ten threads in a busy loop and tries to
test that the kernel distributes a process posix CPU timer signal to every
thread over time.
There is not guarantee that this is true even after commit bcb7ee7902
("posix-timers: Prefer delivery of signals to the current thread") because
that commit only avoids waking up the sleeping process leader thread, but
that has nothing to do with the actual signal delivery.
As the signal is process wide the first thread which observes sigpending
and wins the race to lock sighand will deliver the signal. Testing shows
that this hangs on a regular base because some threads never win the race.
The comment "This primarily tests that the kernel does not favour any one."
is wrong. The kernel does favour a thread which hits the timer interrupt
when CLOCK_PROCESS_CPUTIME_ID expires.
Rewrite the test so it only checks that the group leader sleeping in join()
never receives SIGALRM and the thread which burns CPU cycles receives all
signals.
In older kernels which do not have commit bcb7ee7902 ("posix-timers:
Prefer delivery of signals to the current thread") the test-case fails
immediately, the very 1st tick wakes the leader up. Otherwise it quickly
succeeds after 100 ticks.
CI testing wants to use newer selftest versions on stable kernels. In this
case the test is guaranteed to fail.
So check in the failure case whether the kernel version is less than v6.3
and skip the test result in that case.
[ tglx: Massaged change log, renamed the version check helper ]
Fixes: e797203fb3 ("selftests/timers/posix_timers: Test delivery of signals across threads")
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20240409133802.GD29396@redhat.com
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-11-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-10-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-9-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-8-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-7-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-6-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-5-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Link: https://lore.kernel.org/r/20240403155950.2068109-4-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In general it's preferable to avoid placing cpumasks on the stack, as
for large values of NR_CPUS these can consume significant amounts of
stack space and make stack overflows more likely.
Use cpumask_any_and_but() to avoid the need for a temporary cpumask on
the stack.
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Reviewed-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Reviewed-by: Shuai Xue <xueshuai@linux.alibaba.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-3-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>
In some cases, it's useful to be able to select a random cpu from the
intersection of two masks, excluding a particular CPU.
For example, in some systems an uncore PMU is shared by a subset of
CPUs, and management of this PMU is assigned to some arbitrary CPU in
this set. Whenever the management CPU is hotplugged out, we wish to
migrate responsibility to another arbitrary CPU which is both in this
set and online.
Today we can use cpumask_any_and() to select an arbitrary CPU in the
intersection of two masks. We can also use cpumask_any_but() to select
any arbitrary cpu in a mask excluding, a particular CPU.
To do both, we either need to use a temporary cpumask, which is
wasteful, or use some lower-level cpumask helpers, which can be unclear.
This patch adds a new cpumask_any_and_but() to cater for these cases.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Dawei Li <dawei.li@shingroup.cn>
Acked-by: Yury Norov <yury.norov@gmail.com>
Link: https://lore.kernel.org/r/20240403155950.2068109-2-dawei.li@shingroup.cn
Signed-off-by: Will Deacon <will@kernel.org>