Commit graph

1,308,922 commits

Author SHA1 Message Date
Kent Overstreet
b897b148ee bcachefs: fix bch2_get_acl() transaction restart handling
bch2_acl_from_disk() uses allocate_dropping_locks, and can thus return
a transaction restart - this wasn't handled.

Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-07 17:15:53 -04:00
Dave Airlie
1f913730e7 Merge tag 'drm-misc-next-2024-04-05' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for v6.10:

Core Changes:
- Fix DRM_DISPLAY_DP_HELPER dependencies.

Driver Changes:
- i2c and polling fixes to ast.
- Small fixes to panthor.
- Allow IRQ to share GPIO pins in bridge/adv7511.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2ad89d5a-4096-4cc5-badb-4ad61ff1df7d@linux.intel.com
2024-04-08 06:43:43 +10:00
Linus Torvalds
fec50db703 Linux 6.9-rc3 v6.9-rc3 2024-04-07 13:22:46 -07:00
Benno Lossin
8db31d3f3b rust: workqueue: add #[pin_data] to Work
The previous two patches made it possible to add `#[pin_data]` on
structs with default generic parameter values.
This patch makes `Work` use `#[pin_data]` and removes an invocation of
`pin_init_from_closure`. This function is intended as a low level manual
escape hatch, so it is better to rely on the safe `pin_init!` macro.

Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240309155243.482334-3-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-07 22:03:42 +02:00
Benno Lossin
22eed6068d rust: macros: allow generic parameter default values in #[pin_data]
Add support for generic parameters defaults in `#[pin_data]` by using
the newly introduced `decl_generics` instead of the `impl_generics`.

Before this would not compile:

    #[pin_data]
    struct Foo<const N: usize = 0> {
        // ...
    }

because it would be expanded to this:

    struct Foo<const N: usize = 0> {
        // ...
    }

    const _: () = {
        struct __ThePinData<const N: usize = 0> {
            __phantom: ::core::marker::PhantomData<fn(Foo<N>) -> Foo<N>>,
        }
        impl<const N: usize = 0> ::core::clone::Clone for __ThePinData<N> {
            fn clone(&self) -> Self {
                *self
            }
        }

        // [...] rest of expansion omitted
    };

The problem is with the `impl<const N: usize = 0>`, since that is
invalid Rust syntax. It should not mention the default value at all,
since default values only make sense on type definitions.

The new `impl_generics` do not contain the default values, thus
generating correct Rust code.

This is used by the next commit that puts `#[pin_data]` on
`kernel::workqueue::Work`.

Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Martin Rodriguez Reboredo <yakoyoku@gmail.com>
Reviewed-by: Gary Guo <gary@garyguo.net>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Tested-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240309155243.482334-2-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-07 22:03:42 +02:00
Benno Lossin
9762dca54a rust: macros: add decl_generics to parse_generics()
The generic parameters on a type definition can specify default values.
Currently `parse_generics()` cannot handle this though. For example when
parsing the following generics:

    <T: Clone, const N: usize = 0>

The `impl_generics` will be set to `T: Clone, const N: usize = 0` and
`ty_generics` will be set to `T, N`. Now using the `impl_generics` on an
impl block:

    impl<$($impl_generics)*> Foo {}

will result in invalid Rust code, because default values are only
available on type definitions.

Therefore add parsing support for generic parameter default values using
a new kind of generics called `decl_generics` and change the old
behavior of `impl_generics` to not contain the generic parameter default
values.

Now `Generics` has three fields:
- `impl_generics`: the generics with bounds
  (e.g. `T: Clone, const N: usize`)
- `decl_generics`: the generics with bounds and default values
  (e.g. `T: Clone, const N: usize = 0`)
- `ty_generics`:  contains the generics without bounds and without
  default values (e.g. `T, N`)

`impl_generics` is designed to be used on `impl<$impl_generics>`,
`decl_generics` for the type definition, so `struct Foo<$decl_generics>`
and `ty_generics` whenever you use the type, so `Foo<$ty_generics>`.

Here is an example that uses all three different types of generics:

    let (Generics { decl_generics, impl_generics, ty_generics }, rest) = parse_generics(input);
    quote! {
        struct Foo<$($decl_generics)*> {
            // ...
        }

        impl<$impl_generics> Foo<$ty_generics> {
            fn foo() {
                // ...
            }
        }
    }

The next commit contains a fix to the `#[pin_data]` macro making it
compatible with generic parameter default values by relying on this new
behavior.

Signed-off-by: Benno Lossin <benno.lossin@proton.me>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Link: https://lore.kernel.org/r/20240309155243.482334-1-benno.lossin@proton.me
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-07 22:03:42 +02:00
Hongbo Li
09e913f582 bcachefs: fix the count of nr_freed_pcpu after changing bc->freed_nonpcpu list
When allocating bkey_cached from bc->freed_pcpu list, it missed
decreasing the count of nr_freed_pcpu which would cause the mismatch
between the value of nr_freed_pcpu and the list items. This problem
also exists in moving new bkey_cached to bc->freed_pcpu list.
If these happened, the bug info may appear in
bch2_fs_btree_key_cache_exit by the follow code:

   BUG_ON(list_count_nodes(&bc->freed_pcpu) != bc->nr_freed_pcpu);
   BUG_ON(list_count_nodes(&bc->freed_nonpcpu) != bc->nr_freed_nonpcpu);

Fixes: c65c13f0ea ("bcachefs: Run btree key cache shrinker less aggressively")
Signed-off-by: Hongbo Li <lihongbo22@huawei.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-07 13:40:35 -04:00
Linus Torvalds
9fe30842a9 Miscellaneous x86 fixes:
- Fix MCE timer reinit locking
  - Fix/improve CoCo guest random entropy pool init
  - Fix SEV-SNP late disable bugs
  - Fix false positive objtool build warning
  - Fix header dependency bug
  - Fix resctrl CPU offlining bug
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmYSVU8RHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1gUxA//cbhkLCyHnkM7XWPRhEMD5ukhys7rppeD
 4UdRrMSwQPwZSjUVWPtY/0wL6MHerVq6ghZC483EAuwKXF2y2O3ug3MKAJP0jyaM
 Ap3sZ+RCZljNUg2Rs35LAIUMdRRrGBzWgi8rnxF7JYT9F11GftjNnzyTTKORJXA0
 NQ7633ZBlIeDk21OOkdQq3GkwaYEbUwH69AdOtxKeyT1jOOoWbF6agt/nIw/mdgv
 UkHEVhw4ySvG5Gcj+h77XiWmY2nz/+iDJ763UerMACMlL2niKG9h3Q1ASFeSFDN+
 TQejy/uHRjuHCCG83ebtKd921z6128e2p5g3wjAn7gXBx8ERb8+3CRxOalPrkXC2
 OhcR74lxDqent2OupXqjp1ndLXwKCpnNYUiR/PIhFNjUAE+JQJ4wDTZ6VxL841sb
 t/U6V35/8SIQ52wMv48P2SlaYzUhZHDl4AZ0AVqrRNKAWLH0sOQneEMo+dYRnfwu
 L3uRCLkzs/r0g7dyJjzYdAbilFnIDdCBPzyf//gPBG31XJMZUmYdtQ8vqj8ZDfYd
 qVq98nowRaL16IHwHvoRiP7tBOvX+mV7ariTpASfIPz5mD9dbOsBYJ+N4KSeV5t4
 9oOxwzoaEg9Z9erGfB52aG7Bwzi4XS4wfjrIxqqUXO1bpYFYsmvQe6+Ptgp3QMot
 OGzpalHZous=
 =CIt3
 -----END PGP SIGNATURE-----

Merge tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:

 - Fix MCE timer reinit locking

 - Fix/improve CoCo guest random entropy pool init

 - Fix SEV-SNP late disable bugs

 - Fix false positive objtool build warning

 - Fix header dependency bug

 - Fix resctrl CPU offlining bug

* tag 'x86-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/retpoline: Add NOENDBR annotation to the SRSO dummy return thunk
  x86/mce: Make sure to grab mce_sysfs_mutex in set_bank()
  x86/CPU/AMD: Track SNP host status with cc_platform_*()
  x86/cc: Add cc_platform_set/_clear() helpers
  x86/kvm/Kconfig: Have KVM_AMD_SEV select ARCH_HAS_CC_PLATFORM
  x86/coco: Require seeding RNG with RDRAND on CoCo systems
  x86/numa/32: Include missing <asm/pgtable_areas.h>
  x86/resctrl: Fix uninitialized memory read when last CPU of domain goes offline
2024-04-07 09:33:21 -07:00
Linus Torvalds
3520c35e5f Fix various timer bugs:
- Fix a timer migration bug that may result in missed events
  - Fix timer migration group hierarchy event updates
  - Fix a PowerPC64 build warning
  - Fix a handful of DocBook annotation bugs
 
 Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmYSUpsRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1h+/RAAlbYzlotBMM0cqxCng5jgetTT7EfQHXl1
 zaqhx2FzEjoyhZ++kpBP03A42LumWz0TXTqRK+BicZIHWvIWz16w7xNr0dHo3+L8
 PfPTZEPb1IwSP1FKHyzEZbVWPnHtokyJBky5Qp5IG5FoNqV1pArqeadyaSbd3hIw
 A3l77wHCtXINkxjROs5EoJiOwVcJWigm4M7189EXDUKKr5nzE0hemNAKGnluQZxj
 O5gF9vv40B38MLuo3xLDxFCrY8WDcq9yhv/AtBk+952FsceSZbH29zOt1a5l2HPb
 yvBR4pMaS6x4UdzJeZTbdqDs8v9QWsCUc+qqeNYuFEJSBu9y7Qo5wec8c+Ptiu0E
 1we/g4nWRaRnXvGyS1uj448jUZgnGu61KFbCCF+guDl94zKY6TBZfVpeWrF/Xjdr
 Jq1K8zYMM/+hxlzqsVhoaL+2zAddUeWnwPcSC5J8mnVlyLJUd55Cd0OGcHimz3PV
 QcimajOcE7e/pkw0eQnRQ6qAVeWXcJY4hWoJS9Nk8F9InfDC7I8T5NgsNVb6Edyx
 fj2wE/K9lAfKevz49ieJ8ItIIus3Lzmi09pbfDmDP5J9iMyL6UMk2VXj8XAUvCdL
 qpgigP1zcluwAFqHmaym6mUsej+VL/WqsKfy6Q8LI5yNvdYtUuzfQuqGqyOyGXX0
 zJg6+qU7OAE=
 =4VkW
 -----END PGP SIGNATURE-----

Merge tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull timer fixes from Ingo Molnar:
 "Fix various timer bugs:

   - Fix a timer migration bug that may result in missed events

   - Fix timer migration group hierarchy event updates

   - Fix a PowerPC64 build warning

   - Fix a handful of DocBook annotation bugs"

* tag 'timers-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  timers/migration: Return early on deactivation
  timers/migration: Fix ignored event due to missing CPU update
  vdso: Use CONFIG_PAGE_SHIFT in vdso/datapage.h
  timers: Fix text inconsistencies and spelling
  tick/sched: Fix struct tick_sched doc warnings
  tick/sched: Fix various kernel-doc warnings
  timers: Fix kernel-doc format and add Return values
  time/timekeeping: Fix kernel-doc warnings and typos
  time/timecounter: Fix inline documentation
2024-04-07 09:20:50 -07:00
Linus Torvalds
e2948effa9 Fix a combined PEBS events bug on x86 Intel CPUs.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAmYSRmYRHG1pbmdvQGtl
 cm5lbC5vcmcACgkQEnMQ0APhK1gGLg/9GQS5B/kub1ydjoFx2sCuHe5Zl9vLXpLg
 515yOSKRWnpzjDJaMlAJg9MHiNlcR2Df5rcnVLaKpQSomajFQBKpsJkX4skqAUm3
 wuuCwP0Wc+XJFNDzHGb5yqWaCo06XI80BnZyGHDHDD6jJ5fypzKVyJERnGBpLwjO
 h2YTomtLP5j5Gq7em2d+A9pVRpKwcBOCB8K2sBnJRlPNVR190MWTOm1wEQ+vYQeR
 x8nIx7WaaA6SInqWVGkhloasTmeWEH89Q2wjCltZpYFnRiEa1yS/VHVT6ZQKrpOy
 +mBqr92tXdxT2Y+8LNAMUg5PgRVMbZoY+Glin0Q0N4Cg92BZIl8NX8wtb3oacYgd
 XhiRyRWaw8JDCC2mEmhlEa01M2Y7PXtcBjvOVQwoZLS/711Zyf+fHjyX4FUG8Vcb
 T0PgaQoterlVnN4H2uWq8Za8ubjI0TW0nRBw2oQKlSv/5ldJ2IKJsQdsbl1q4wQr
 TtYJY2bq5Hrn+qlFZi6jFB2KvBOUV3molXlZAPJ0Nr/Y9mkMBRVcq6ufrAunpgUB
 l62Ls61HHZ9+hVNIIpM8/p/rTYjeVilA7vjHGiCJFcsclvPNBBkobtbpri/ioE0t
 4+pH60LsMBIwAhOAKlJ6Jzf4LaWEikJfDPpj8yMKixGOxDT542rUN7A3NwdP2H6b
 2fV3Nyr7sEw=
 =v7jY
 -----END PGP SIGNATURE-----

Merge tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86 perf fix from Ingo Molnar:
 "Fix a combined PEBS events bug on x86 Intel CPUs"

* tag 'perf-urgent-2024-04-07' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/ds: Don't clear ->pebs_data_cfg for the last PEBS event
2024-04-07 09:14:46 -07:00
Christian Brauner
0a4f544d83
fs: use bit shifts for FMODE_* flags
Make it easier to see what bits are still available.

Link: https://lore.kernel.org/r/20240406061604.GA538574@ZenIV
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-04-07 18:04:46 +02:00
Hariprasad Kelam
bccb798e07 octeontx2-pf: Fix transmit scheduler resource leak
Inorder to support shaping and scheduling, Upon class creation
Netdev driver allocates trasmit schedulers.

The previous patch which added support for Round robin scheduling has
a bug due to which driver is not freeing transmit schedulers post
class deletion.

This patch fixes the same.

Fixes: 47a9656f16 ("octeontx2-pf: htb offload support for Round Robin scheduling")
Signed-off-by: Hariprasad Kelam <hkelam@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-07 15:45:56 +01:00
Breno Leitao
059a49aa2e virtio_net: Do not send RSS key if it is not supported
There is a bug when setting the RSS options in virtio_net that can break
the whole machine, getting the kernel into an infinite loop.

Running the following command in any QEMU virtual machine with virtionet
will reproduce this problem:

    # ethtool -X eth0  hfunc toeplitz

This is how the problem happens:

1) ethtool_set_rxfh() calls virtnet_set_rxfh()

2) virtnet_set_rxfh() calls virtnet_commit_rss_command()

3) virtnet_commit_rss_command() populates 4 entries for the rss
scatter-gather

4) Since the command above does not have a key, then the last
scatter-gatter entry will be zeroed, since rss_key_size == 0.
sg_buf_size = vi->rss_key_size;

5) This buffer is passed to qemu, but qemu is not happy with a buffer
with zero length, and do the following in virtqueue_map_desc() (QEMU
function):

  if (!sz) {
      virtio_error(vdev, "virtio: zero sized buffers are not allowed");

6) virtio_error() (also QEMU function) set the device as broken

    vdev->broken = true;

7) Qemu bails out, and do not repond this crazy kernel.

8) The kernel is waiting for the response to come back (function
virtnet_send_command())

9) The kernel is waiting doing the following :

      while (!virtqueue_get_buf(vi->cvq, &tmp) &&
	     !virtqueue_is_broken(vi->cvq))
	      cpu_relax();

10) None of the following functions above is true, thus, the kernel
loops here forever. Keeping in mind that virtqueue_is_broken() does
not look at the qemu `vdev->broken`, so, it never realizes that the
vitio is broken at QEMU side.

Fix it by not sending RSS commands if the feature is not available in
the device.

Fixes: c7114b1249 ("drivers/net/virtio_net: Added basic RSS support.")
Cc: stable@vger.kernel.org
Cc: qemu-devel@nongnu.org
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Heng Qi <hengqi@linux.alibaba.com>
Reviewed-by: Xuan Zhuo <xuanzhuo@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2024-04-07 15:43:14 +01:00
Colin Ian King
4665be0e95 dmaengine: pch_dma: remove unused function chan2parent
The helper function chan2parent is not used and has never been
used since the first commit to the code back in 2010. The function
is redundant and can be removed.

Cleans up clang scan build warning:
drivers/dma/pch_dma.c:158:30: warning: unused function 'chan2parent' [-Wunused-function]

Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20240308134750.2058556-1-colin.i.king@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 18:36:58 +05:30
Fenghua Yu
f221033f5c dmaengine: idxd: Fix oops during rmmod on single-CPU platforms
During the removal of the idxd driver, registered offline callback is
invoked as part of the clean up process. However, on systems with only
one CPU online, no valid target is available to migrate the
perf context, resulting in a kernel oops:

    BUG: unable to handle page fault for address: 000000000002a2b8
    #PF: supervisor write access in kernel mode
    #PF: error_code(0x0002) - not-present page
    PGD 1470e1067 P4D 0
    Oops: 0002 [#1] PREEMPT SMP NOPTI
    CPU: 0 PID: 20 Comm: cpuhp/0 Not tainted 6.8.0-rc6-dsa+ #57
    Hardware name: Intel Corporation AvenueCity/AvenueCity, BIOS BHSDCRB1.86B.2492.D03.2307181620 07/18/2023
    RIP: 0010:mutex_lock+0x2e/0x50
    ...
    Call Trace:
    <TASK>
    __die+0x24/0x70
    page_fault_oops+0x82/0x160
    do_user_addr_fault+0x65/0x6b0
    __pfx___rdmsr_safe_on_cpu+0x10/0x10
    exc_page_fault+0x7d/0x170
    asm_exc_page_fault+0x26/0x30
    mutex_lock+0x2e/0x50
    mutex_lock+0x1e/0x50
    perf_pmu_migrate_context+0x87/0x1f0
    perf_event_cpu_offline+0x76/0x90 [idxd]
    cpuhp_invoke_callback+0xa2/0x4f0
    __pfx_perf_event_cpu_offline+0x10/0x10 [idxd]
    cpuhp_thread_fun+0x98/0x150
    smpboot_thread_fn+0x27/0x260
    smpboot_thread_fn+0x1af/0x260
    __pfx_smpboot_thread_fn+0x10/0x10
    kthread+0x103/0x140
    __pfx_kthread+0x10/0x10
    ret_from_fork+0x31/0x50
    __pfx_kthread+0x10/0x10
    ret_from_fork_asm+0x1b/0x30
    <TASK>

Fix the issue by preventing the migration of the perf context to an
invalid target.

Fixes: 81dd4d4d61 ("dmaengine: idxd: Add IDXD performance monitor support")
Reported-by: Terrence Xu <terrence.xu@intel.com>
Tested-by: Terrence Xu <terrence.xu@intel.com>
Signed-off-by: Fenghua Yu <fenghua.yu@intel.com>
Link: https://lore.kernel.org/r/20240313214031.1658045-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:56:06 +05:30
Frank Li
ebf850697a dmaengine: fsl-dpaa2-qdma: Add dpdmai_cmd_open
Introduce the structures dpdmai_cmd_open to maintain consistency within the
API calls of the driver.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240320-dpaa2-v1-3-eb56e47c94ec@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:52:59 +05:30
Frank Li
26a4d2aeda dmaengine: fsl-dpaa2-qdma: Remove unused function dpdmai_create()
Remove unused function dpdmai_create();

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240320-dpaa2-v1-2-eb56e47c94ec@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:52:59 +05:30
Frank Li
06db9ee8b4 dmaengine: fsl-dpaa2-qdma: clean up unused macro
Remove unused macro definition.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240320-dpaa2-v1-1-eb56e47c94ec@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:52:59 +05:30
Joy Zou
d8d4355861 dmaengine: fsl-edma: add i.MX8ULP edma support
Add support for the i.MX8ULP platform to the eDMA driver. Introduce the use
of the correct FSL_EDMA_DRV_HAS_CHCLK flag to handle per-channel clock
configurations.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-5-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:20:00 +05:30
Joy Zou
b14f56beb2 dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string
Introduce the compatible string 'fsl,imx8ulp-edma' to enable support for
the i.MX8ULP's eDMA, alongside adjusting the clock numbering. The i.MX8ULP
eDMA architecture features one clock for each DMA channel and an additional
clock for the core controller. Given a maximum of 32 DMA channels, the
maximum clock number consequently increases to 33.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-4-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:20:00 +05:30
Frank Li
9a5000cf70 dmaengine: fsl-edma: clean up chclk and FSL_EDMA_DRV_HAS_CHCLK
No device currently utilizes chclk and FSL_EDMA_DRV_HAS_CHCLK features.
Removes these unused features.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-3-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:20:00 +05:30
Frank Li
6aa60f79e6 dmaengine: fsl-edma: add safety check for 'srcid'
Ensure that 'srcid' is a non-zero value to avoid dtb passing invalid
'srcid' to the driver.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-2-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:20:00 +05:30
Frank Li
cee8cbfc7b dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan
The 'slave_id' field is redundant as it duplicates the functionality of
'srcid'. Remove 'slave_id' from fsl_edma_chan to eliminate redundancy.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240323-8ulp_edma-v3-1-c0e981027c05@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:20:00 +05:30
Christian Brauner
210a03c9d5
fs: claw back a few FMODE_* bits
There's a bunch of flags that are purely based on what the file
operations support while also never being conditionally set or unset.
IOW, they're not subject to change for individual files. Imho, such
flags don't need to live in f_mode they might as well live in the fops
structs itself. And the fops struct already has that lonely
mmap_supported_flags member. We might as well turn that into a generic
fop_flags member and move a few flags from FMODE_* space into FOP_*
space. That gets us four FMODE_* bits back and the ability for new
static flags that are about file ops to not have to live in FMODE_*
space but in their own FOP_* space. It's not the most beautiful thing
ever but it gets the job done. Yes, there'll be an additional pointer
chase but hopefully that won't matter for these flags.

I suspect there's a few more we can move into there and that we can also
redirect a bunch of new flag suggestions that follow this pattern into
the fop_flags field instead of f_mode.

Link: https://lore.kernel.org/r/20240328-gewendet-spargel-aa60a030ef74@brauner
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christian Brauner <brauner@kernel.org>
2024-04-07 13:49:02 +02:00
Baruch Siach
e32634f466 dma: dw-axi-dmac: support per channel interrupt
Hardware might not support a single combined interrupt that covers all
channels. In that case we have to deal with interrupt per channel. Add
support for that configuration.

Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Link: https://lore.kernel.org/r/ebab52e886ef1adc3c40e636aeb1ba3adfe2e578.1711453387.git.baruchs-c@neureality.ai
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:18:14 +05:30
Joao Pinto
333e11bf47 Avoid hw_desc array overrun in dw-axi-dmac
I have a use case where nr_buffers = 3 and in which each descriptor is composed by 3
segments, resulting in the DMA channel descs_allocated to be 9. Since axi_desc_put()
handles the hw_desc considering the descs_allocated, this scenario would result in a
kernel panic (hw_desc array will be overrun).

To fix this, the proposal is to add a new member to the axi_dma_desc structure,
where we keep the number of allocated hw_descs (axi_desc_alloc()) and use it in
axi_desc_put() to handle the hw_desc array correctly.

Additionally I propose to remove the axi_chan_start_first_queued() call after completing
the transfer, since it was identified that unbalance can occur (started descriptors can
be interrupted and transfer ignored due to DMA channel not being enabled).

Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Link: https://lore.kernel.org/r/1711536564-12919-1-git-send-email-jpinto@synopsys.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:15:24 +05:30
Tan Chun Hau
559a669018 dmaengine: dw-axi-dmac: Add support for StarFive JH8100 DMA
JH8100 requires reset operation only in device probe.

Signed-off-by: Tan Chun Hau <chunhau.tan@starfivetech.com>
Link: https://lore.kernel.org/r/20240327025126.229475-3-chunhau.tan@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:11:12 +05:30
Tan Chun Hau
9bcf929ba1 dt-bindings: dma: snps,dw-axi-dmac: Add JH8100 support
Add support for StarFive JH8100 SoC in Sysnopsys Designware AXI DMA
controller.

Both JH8100 and JH7110 require reset operation in device probe.
However, JH8100 doesn't need to apply different configuration on
CH_CFG registers.

Signed-off-by: Tan Chun Hau <chunhau.tan@starfivetech.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240327025126.229475-2-chunhau.tan@starfivetech.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:11:12 +05:30
Nuno Sa
779a44831a dmaengine: axi-dmac: move to device managed probe
In axi_dmac_probe(), there's a mix in using device managed APIs and
explicitly cleaning things in the driver .remove() hook. Move to use
device managed APIs and thus drop the .remove() hook.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240328-axi-dmac-devm-probe-v3-2-523c0176df70@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:10:20 +05:30
Nuno Sa
1bc3144420 dmaengine: axi-dmac: fix possible race in remove()
We need to first free the IRQ before calling of_dma_controller_free().
Otherwise we could get an interrupt and schedule a tasklet while
removing the DMA controller.

Fixes: 0e3b67b348 ("dmaengine: Add support for the Analog Devices AXI-DMAC DMA controller")
Cc: stable@kernel.org
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240328-axi-dmac-devm-probe-v3-1-523c0176df70@analog.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:10:20 +05:30
Miquel Raynal
7a71c6dc21 dmaengine: xilinx: xdma: Clarify kdoc in XDMA driver
Clarify the kernel doc of xdma_fill_descs(), especially how big chunks
will be handled.

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/stable/20240327-digigram-xdma-fixes-v1-3-45f4a52c0283%40bootlin.com
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-3-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:08:45 +05:30
Louis Chauvet
6a40fb8245 dmaengine: xilinx: xdma: Fix synchronization issue
The current xdma_synchronize method does not properly wait for the last
transfer to be done. Due to limitations of the XMDA engine, it is not
possible to stop a transfer in the middle of a descriptor. Said
otherwise, if a stop is requested at the end of descriptor "N" and the OS
is fast enough, the DMA controller will effectively stop immediately.
However, if the OS is slightly too slow to request the stop and the DMA
engine starts descriptor "N+1", the N+1 transfer will be performed until
its end. This means that after a terminate_all, the last descriptor must
remain valid and the synchronization must wait for this last descriptor to
be terminated.

Fixes: 855c2e1d18 ("dmaengine: xilinx: xdma: Rework xdma_terminate_all()")
Fixes: f5c392d106 ("dmaengine: xilinx: xdma: Add terminate_all/synchronize callbacks")
Cc: stable@vger.kernel.org
Suggested-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-2-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:08:45 +05:30
Miquel Raynal
5b9706bfc0 dmaengine: xilinx: xdma: Fix wrong offsets in the buffers addresses in dma descriptor
The addition of interleaved transfers slightly changed the way
addresses inside DMA descriptors are derived, breaking cyclic
transfers.

Fixes: 3e184e64c2 ("dmaengine: xilinx: xdma: Prepare the introduction of interleaved DMA transfers")
Cc: stable@vger.kernel.org
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Louis Chauvet <louis.chauvet@bootlin.com>
Link: https://lore.kernel.org/r/20240327-digigram-xdma-fixes-v1-1-45f4a52c0283@bootlin.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:08:45 +05:30
Sean Anderson
ec177e4645 dma: Add lockdep asserts to virt-dma
Add lockdep asserts to all functions with "vc.lock must be held by
caller" in their documentation. This will help catch cases where these
assumptions do not hold.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20240308210034.3634938-4-sean.anderson@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:08:19 +05:30
Sean Anderson
28ccf02caa dma: xilinx_dpdma: Remove unnecessary use of irqsave/restore
xilinx_dpdma_chan_done_irq and xilinx_dpdma_chan_vsync_irq are always
called with IRQs disabled from xilinx_dpdma_irq_handler. Therefore we
don't need to save/restore the IRQ flags.

Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20240308210034.3634938-3-sean.anderson@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:08:19 +05:30
Sean Anderson
244296cc3a dma: xilinx_dpdma: Fix locking
There are several places where either chan->lock or chan->vchan.lock was
not held. Add appropriate locking. This fixes lockdep warnings like

[   31.077578] ------------[ cut here ]------------
[   31.077831] WARNING: CPU: 2 PID: 40 at drivers/dma/xilinx/xilinx_dpdma.c:834 xilinx_dpdma_chan_queue_transfer+0x274/0x5e0
[   31.077953] Modules linked in:
[   31.078019] CPU: 2 PID: 40 Comm: kworker/u12:1 Not tainted 6.6.20+ #98
[   31.078102] Hardware name: xlnx,zynqmp (DT)
[   31.078169] Workqueue: events_unbound deferred_probe_work_func
[   31.078272] pstate: 600000c5 (nZCv daIF -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[   31.078377] pc : xilinx_dpdma_chan_queue_transfer+0x274/0x5e0
[   31.078473] lr : xilinx_dpdma_chan_queue_transfer+0x270/0x5e0
[   31.078550] sp : ffffffc083bb2e10
[   31.078590] x29: ffffffc083bb2e10 x28: 0000000000000000 x27: ffffff880165a168
[   31.078754] x26: ffffff880164e920 x25: ffffff880164eab8 x24: ffffff880164d480
[   31.078920] x23: ffffff880165a148 x22: ffffff880164e988 x21: 0000000000000000
[   31.079132] x20: ffffffc082aa3000 x19: ffffff880164e880 x18: 0000000000000000
[   31.079295] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000
[   31.079453] x14: 0000000000000000 x13: ffffff8802263dc0 x12: 0000000000000001
[   31.079613] x11: 0001ffc083bb2e34 x10: 0001ff880164e98f x9 : 0001ffc082aa3def
[   31.079824] x8 : 0001ffc082aa3dec x7 : 0000000000000000 x6 : 0000000000000516
[   31.079982] x5 : ffffffc7f8d43000 x4 : ffffff88003c9c40 x3 : ffffffffffffffff
[   31.080147] x2 : ffffffc7f8d43000 x1 : 00000000000000c0 x0 : 0000000000000000
[   31.080307] Call trace:
[   31.080340]  xilinx_dpdma_chan_queue_transfer+0x274/0x5e0
[   31.080518]  xilinx_dpdma_issue_pending+0x11c/0x120
[   31.080595]  zynqmp_disp_layer_update+0x180/0x3ac
[   31.080712]  zynqmp_dpsub_plane_atomic_update+0x11c/0x21c
[   31.080825]  drm_atomic_helper_commit_planes+0x20c/0x684
[   31.080951]  drm_atomic_helper_commit_tail+0x5c/0xb0
[   31.081139]  commit_tail+0x234/0x294
[   31.081246]  drm_atomic_helper_commit+0x1f8/0x210
[   31.081363]  drm_atomic_commit+0x100/0x140
[   31.081477]  drm_client_modeset_commit_atomic+0x318/0x384
[   31.081634]  drm_client_modeset_commit_locked+0x8c/0x24c
[   31.081725]  drm_client_modeset_commit+0x34/0x5c
[   31.081812]  __drm_fb_helper_restore_fbdev_mode_unlocked+0x104/0x168
[   31.081899]  drm_fb_helper_set_par+0x50/0x70
[   31.081971]  fbcon_init+0x538/0xc48
[   31.082047]  visual_init+0x16c/0x23c
[   31.082207]  do_bind_con_driver.isra.0+0x2d0/0x634
[   31.082320]  do_take_over_console+0x24c/0x33c
[   31.082429]  do_fbcon_takeover+0xbc/0x1b0
[   31.082503]  fbcon_fb_registered+0x2d0/0x34c
[   31.082663]  register_framebuffer+0x27c/0x38c
[   31.082767]  __drm_fb_helper_initial_config_and_unlock+0x5c0/0x91c
[   31.082939]  drm_fb_helper_initial_config+0x50/0x74
[   31.083012]  drm_fbdev_dma_client_hotplug+0xb8/0x108
[   31.083115]  drm_client_register+0xa0/0xf4
[   31.083195]  drm_fbdev_dma_setup+0xb0/0x1cc
[   31.083293]  zynqmp_dpsub_drm_init+0x45c/0x4e0
[   31.083431]  zynqmp_dpsub_probe+0x444/0x5e0
[   31.083616]  platform_probe+0x8c/0x13c
[   31.083713]  really_probe+0x258/0x59c
[   31.083793]  __driver_probe_device+0xc4/0x224
[   31.083878]  driver_probe_device+0x70/0x1c0
[   31.083961]  __device_attach_driver+0x108/0x1e0
[   31.084052]  bus_for_each_drv+0x9c/0x100
[   31.084125]  __device_attach+0x100/0x298
[   31.084207]  device_initial_probe+0x14/0x20
[   31.084292]  bus_probe_device+0xd8/0xdc
[   31.084368]  deferred_probe_work_func+0x11c/0x180
[   31.084451]  process_one_work+0x3ac/0x988
[   31.084643]  worker_thread+0x398/0x694
[   31.084752]  kthread+0x1bc/0x1c0
[   31.084848]  ret_from_fork+0x10/0x20
[   31.084932] irq event stamp: 64549
[   31.084970] hardirqs last  enabled at (64548): [<ffffffc081adf35c>] _raw_spin_unlock_irqrestore+0x80/0x90
[   31.085157] hardirqs last disabled at (64549): [<ffffffc081adf010>] _raw_spin_lock_irqsave+0xc0/0xdc
[   31.085277] softirqs last  enabled at (64503): [<ffffffc08001071c>] __do_softirq+0x47c/0x500
[   31.085390] softirqs last disabled at (64498): [<ffffffc080017134>] ____do_softirq+0x10/0x1c
[   31.085501] ---[ end trace 0000000000000000 ]---

Fixes: 7cbb0c63de ("dmaengine: xilinx: dpdma: Add the Xilinx DisplayPort DMA engine driver")
Signed-off-by: Sean Anderson <sean.anderson@linux.dev>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20240308210034.3634938-2-sean.anderson@linux.dev
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 17:08:05 +05:30
Shengjiu Wang
a20f10d6ac dmaengine: imx-sdma: support dual fifo for DEV_TO_DEV
SSI and SPDIF are dual fifo interface, when support ASRC P2P
with SSI and SPDIF, the src fifo or dst fifo number can be
two.

The p2p watermark level bit 13 and 14 are designed for
these use case. This patch is to complete this function
in driver.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Acked-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240329-sdma_upstream-v4-3-daeb3067dea7@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 16:49:25 +05:30
Shengjiu Wang
288109387b dmaengine: imx-sdma: Support 24bit/3bytes for sg mode
Update 3bytes buswidth that is supported by sdma.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Vipul Kumar <vipul_kumar@mentor.com>
Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar@mentor.com>
Acked-by: Robin Gong <yibin.gong@nxp.com>
Reviewed-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240329-sdma_upstream-v4-2-daeb3067dea7@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 16:49:25 +05:30
Nicolin Chen
802ef22310 dmaengine: imx-sdma: Support allocate memory from internal SRAM (iram)
Allocate memory from SoC internal SRAM to reduce DDR access and keep DDR in
lower power state (such as self-referesh) longer.

Check iram_pool before sdma_init() so that ccb/context could be allocated
from iram because DDR maybe in self-referesh in lower power audio case
while sdma still running.

Reviewed-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Signed-off-by: Nicolin Chen <b42378@freescale.com>
Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20240329-sdma_upstream-v4-1-daeb3067dea7@nxp.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 16:49:25 +05:30
Rob Herring
7eccb5a5b2 dt-bindings: dma: snps,dma-spear1340: Fix data{-,_}width schema
'data-width' and 'data_width' properties are defined as arrays, but the
schema is defined as a matrix. That works currently since everything gets
decoded in to matrices, but that is internal to dtschema and could change.

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Serge Semin <fancer.lancer@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240401204354.1691845-1-robh@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 13:44:50 +05:30
Chen Ni
2b1c1cf08a dmaengine: idma64: Add check for dma_set_max_seg_size
As the possible failure of the dma_set_max_seg_size(), it should be
better to check the return value of the dma_set_max_seg_size().

Fixes: e3fdb1894c ("dmaengine: idma64: set maximum allowed segment size for DMA")
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240403024932.3342606-1-nichen@iscas.ac.cn
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 13:39:55 +05:30
Rex Zhang
d5638de827 dmaengine: idxd: Convert spinlock to mutex to lock evl workqueue
drain_workqueue() cannot be called safely in a spinlocked context due to
possible task rescheduling. In the multi-task scenario, calling
queue_work() while drain_workqueue() will lead to a Call Trace as
pushing a work on a draining workqueue is not permitted in spinlocked
context.
    Call Trace:
    <TASK>
    ? __warn+0x7d/0x140
    ? __queue_work+0x2b2/0x440
    ? report_bug+0x1f8/0x200
    ? handle_bug+0x3c/0x70
    ? exc_invalid_op+0x18/0x70
    ? asm_exc_invalid_op+0x1a/0x20
    ? __queue_work+0x2b2/0x440
    queue_work_on+0x28/0x30
    idxd_misc_thread+0x303/0x5a0 [idxd]
    ? __schedule+0x369/0xb40
    ? __pfx_irq_thread_fn+0x10/0x10
    ? irq_thread+0xbc/0x1b0
    irq_thread_fn+0x21/0x70
    irq_thread+0x102/0x1b0
    ? preempt_count_add+0x74/0xa0
    ? __pfx_irq_thread_dtor+0x10/0x10
    ? __pfx_irq_thread+0x10/0x10
    kthread+0x103/0x140
    ? __pfx_kthread+0x10/0x10
    ret_from_fork+0x31/0x50
    ? __pfx_kthread+0x10/0x10
    ret_from_fork_asm+0x1b/0x30
    </TASK>

The current implementation uses a spinlock to protect event log workqueue
and will lead to the Call Trace due to potential task rescheduling.

To address the locking issue, convert the spinlock to mutex, allowing
the drain_workqueue() to be called in a safe mutex-locked context.

This change ensures proper synchronization when accessing the event log
workqueue, preventing potential Call Trace and improving the overall
robustness of the code.

Fixes: c40bd7d973 ("dmaengine: idxd: process user page faults for completion record")
Signed-off-by: Rex Zhang <rex.zhang@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Lijun Pan <lijun.pan@intel.com>
Link: https://lore.kernel.org/r/20240404223949.2885604-1-fenghua.yu@intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 13:31:44 +05:30
Jerry Snitselaar
c863062cf8 dmaengine: idxd: Check for driver name match before sva user feature
Currently if the user driver is probed on a workqueue configured for
another driver with SVA not enabled on the system, it will print
out a number of probe failing messages like the following:

    [   264.831140] user: probe of wq13.0 failed with error -95

On some systems, such as GNR, the number of messages can
reach over 100.

Move the SVA feature check to be after the driver name match
check.

Cc: Vinod Koul <vkoul@kernel.org>
Cc: dmaengine@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Reviewed-by: Fenghua Yu <fenghua.yu@intel.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Link: https://lore.kernel.org/r/20240405213941.3629709-1-jsnitsel@redhat.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 13:05:47 +05:30
Gabor Juhos
47b3e2f391 phy: qcom: m31: match requested regulator name with dt schema
According to the 'qcom,ipq5332-usb-hsphy.yaml' schema, the 5V
supply regulator must be defined via the 'vdd-supply' property.
The driver however requests for the 'vdda-phy' regulator which
results in the following message when the driver is probed on
a IPQ5018 based board with a device tree matching to the schema:

  qcom-m31usb-phy 5b000.phy: supply vdda-phy not found, using dummy regulator
  qcom-m31usb-phy 5b000.phy: Registered M31 USB phy

This means that the regulator specified in the device tree never
gets enabled.

Change the driver to use the 'vdd' name for the regulator as per
defined in the schema in order to ensure that the corresponding
regulator gets enabled.

Fixes: 08e49af507 ("phy: qcom: Introduce M31 USB PHY driver")
Reviewed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Gabor Juhos <j4g8y7@gmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20240406-phy-qcom-m31-regulator-fix-v2-1-c8e9795bc071@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2024-04-07 12:49:42 +05:30
Al Viro
469ad583c1 erofs: switch erofs_bread() to passing offset instead of block number
Callers are happier that way, especially since we no longer need to
play with splitting offset into block number and offset within block,
passing the former to erofs_bread(), then adding the latter...

erofs_bread() always reads entire pages, anyway.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-04-07 03:04:50 -04:00
Al Viro
e82051193a new helper: copy_to_iter_full()
... and convert copy_linear_skb() to using that.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2024-04-07 02:42:36 -04:00
Takashi Iwai
a9b16d5918 Merge branch 'topic/emu10k1-fix' into for-next
Pull emu10k1 fix patch series

Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-07 08:38:02 +02:00
Oswald Buddenhagen
4c4cbe6682 ALSA: emux: simplify snd_sf_list.callback handling
Both drivers provide both sample_new and sample_free, and it makes no
sense to pretend that they could not. In fact, load_data() would already
crash if sample_new was null. So remove the remaining null checks.

Contrary to that, the emu10k1 driver actually has a null sample_reset,
though I'm not convinced that this inconsistency is justified.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-18-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-07 08:35:53 +02:00
Oswald Buddenhagen
62001ad1b4 ALSA: emu10k1: shrink blank space in front of wavetable samples
There is no need for it to be 32 samples - 3 will do just fine (which is
the interpolator's epsilon). The old size was presumably meant to
compensate for the cache's presence, but we're now handling that
properly.

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-17-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-07 08:35:52 +02:00
Oswald Buddenhagen
d0440680a1 ALSA: emu10k1: fix wavetable playback position and caching, take 2
Compensate for the cache lag of 64 frames, and actually populate the
cache. Without these, the playback would start with garbage (which
would be (mostly?) masqueraded by the note's attack phase).

Note that we set the starting address only 61 frames ahead, to
compensate for the interpolator's epsilon. Unlike for PCM playback, we
don't even need to manually silence-fill the first frames in the cache,
because we insert some silence in front of each sample anyway.

A challenge are extremely short samples with a loop end below the cache
size, because a) we'd have to wrap the current address to be within the
loop and b) automatic pre-filling of the cache with the right data does
not work in this case.

We could pre-fill the cache manually, but that's slow, requires
additional code for each sample width, and is made even more complex by
the driver's virtual address space having no contiguous mapping for the
CPU.

We could have the engine fill the cache piece-wise (which is really what
happens when playback is running), but that would also be complex, and
we'd need to wait for the engine to handle each piece, so it wouldn't be
that much faster than the manual fill.

For the case of requiring only one loop iteration prior to reaching the
cache size, we could leverage the engine's looping mechanism around
CCR_CACHELOOPFLAG, but this special case doesn't seem worth the
complexity.

So we just unroll the loop as far as necessary to be able to play back
the sample without any fiddling.

Pedantically, this would be incorrect for loop-until-release samples
with a low loop end which are released very quickly, but that would be
relatively harmless, is not a plausible use case in the first place, and
SoundFont sample mode 3 isn't actually implemented anyway (it's
conflated with mode 1, infinite looping).

Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240406064830.1029573-16-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-07 08:35:52 +02:00