Commit graph

1,308,922 commits

Author SHA1 Message Date
Christian A. Ehrhardt
ce4c8d2105 usb: typec: ucsi: Fix connector check on init
Fix issues when initially checking for a connector change:
- Use the correct connector number not the entire CCI.
- Call ->read under the PPM lock.
- Remove a bogus READ_ONCE.

Fixes: 808a8b9e0b ("usb: typec: ucsi: Check for notifications after init")
Cc: stable@kernel.org
Signed-off-by: Christian A. Ehrhardt <lk@c--e.de>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20240401210515.1902048-1-lk@c--e.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04 15:17:13 +02:00
Krzysztof Kozlowski
3f03e7717c usb: phy: MAINTAINERS: mark Freescale USB PHY as orphaned
Emails to the only maintainer bounce:

  <ran.wang_1@nxp.com>: host nxp-com.mail.protection.outlook.com[52.101.68.39]
  said: 550 5.4.1 Recipient address rejected: Access denied.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240327175308.520317-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04 15:17:10 +02:00
Michael Ellerman
6963092601 powerpc/crypto/chacha-p10: Fix failure on non Power10
The chacha-p10-crypto module provides optimised chacha routines for
Power10. It also selects CRYPTO_ARCH_HAVE_LIB_CHACHA which says it
provides chacha_crypt_arch() to generic code.

Notably the module needs to provide chacha_crypt_arch() regardless of
whether it is loaded on Power10 or an older CPU.

The implementation of chacha_crypt_arch() already has a fallback to
chacha_crypt_generic(), however the module as a whole fails to load on
pre-Power10, because of the use of module_cpu_feature_match().

This breaks for example loading wireguard:

  jostaberry-1:~ # modprobe -v wireguard
  insmod /lib/modules/6.8.0-lp155.8.g7e0e887-default/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko.zst
  modprobe: ERROR: could not insert 'wireguard': No such device

Fix it by removing module_cpu_feature_match(), and instead check the
CPU feature manually. If the CPU feature is not found, the module
still loads successfully, but doesn't register the Power10 specific
algorithms. That allows chacha_crypt_generic() to remain available for
use, fixing the problem.

  [root@fedora ~]# modprobe -v wireguard
  insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv4/udp_tunnel.ko
  insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/net/ipv6/ip6_udp_tunnel.ko
  insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha.ko
  insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/arch/powerpc/crypto/chacha-p10-crypto.ko
  insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/lib/crypto/libchacha20poly1305.ko
  insmod /lib/modules/6.8.0-00001-g786a790c4d79/kernel/drivers/net/wireguard/wireguard.ko
  [   18.910452][  T721] wireguard: allowedips self-tests: pass
  [   18.914999][  T721] wireguard: nonce counter self-tests: pass
  [   19.029066][  T721] wireguard: ratelimiter self-tests: pass
  [   19.029257][  T721] wireguard: WireGuard 1.0.0 loaded. See www.wireguard.com for information.
  [   19.029361][  T721] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.

Reported-by: Michal Suchánek <msuchanek@suse.de>
Closes: https://lore.kernel.org/all/20240315122005.GG20665@kitsune.suse.cz/
Acked-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20240328130200.3041687-1-mpe@ellerman.id.au
2024-04-05 00:02:18 +11:00
Mathias Nyman
dda7e89e53 xhci: Fix root hub port null pointer dereference in xhci tracepoints
The pointer from a xhci usb virt device to its root hub port
(vdev->rhub_port) is set later when device is addressed, not while
vdev is allocated.

Tracepoints dereferenced this rhub_port pointer when freeing the virt
device, which causes null pointer dereference if tracing is enabled
and device is freed before addressed.

This can happen if tracing is enabled and xhci driver is unloaded before
a device is fully enumerated, or initial enumeration fails and device
is reset and freed before retry.

Don't dereference the rhub_port or show port numbers when tracing
xhci_free_virt_device(). This info is not very useful anyway.

Print the more useful slot id instead

Fixes: 06790c1908 ("xhci: replace real & fake port with pointer to root hub port")
Reported-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Closes: https://lore.kernel.org/linux-usb/20240402005007.klv2ij727fkz7rpd@synopsys.com/
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240404121106.2842417-3-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04 14:54:54 +02:00
Oliver Neukum
5bfc311dd6 usb: xhci: correct return value in case of STS_HCE
If we get STS_HCE we give up on the interrupt, but for the purpose
of IRQ handling that still counts as ours. We may return IRQ_NONE
only if we are positive that it wasn't ours. Hence correct the default.

Fixes: 2a25e66d67 ("xhci: print warning when HCE was set")
Cc: stable@vger.kernel.org # v6.2+
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Link: https://lore.kernel.org/r/20240404121106.2842417-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2024-04-04 14:54:53 +02:00
Adam Ford
f3d9683346 drm/bridge: adv7511: Allow IRQ to share GPIO pins
The IRQ registration currently assumes that the GPIO is dedicated
to it, but that may not necessarily be the case. If the board has
another device sharing the GPIO, it won't be registered and the
hot-plug detect fails to function.

Currently, the handler reads two registers and blindly
assumes one of them caused the interrupt and returns IRQ_HANDLED
unless there is an error. In order to properly do this, the IRQ
handler needs to check if it needs to handle the IRQ and return
IRQ_NONE if there is nothing to handle.  With the check added
and the return code properly indicating whether or not it there
was an IRQ, the IRQF_SHARED can be set to share a GPIO IRQ.

V2:  Add check to see if there is IRQ data to handle

Signed-off-by: Adam Ford <aford173@gmail.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20240305004859.201085-1-aford173@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-04-04 15:27:59 +03:00
Francesco Dolcini
9f1aeef4cb
ASoC: nau8822: Remove unused member from struct
Remove unused mclk_idx struct member.

Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Link: https://msgid.link/r/20240404111953.99287-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04 12:59:42 +01:00
Arnd Bergmann
2ba2d17170
ASoC: codecs: rk3308: fix building without CONFIG_OF
The newly added codec has an extraneous of_match_ptr() annotation for
the ID table:

sound/soc/codecs/rk3308_codec.c:956:34: error: 'rk3308_codec_of_match' defined but not used [-Werror=unused-const-variable=]
  956 | static const struct of_device_id rk3308_codec_of_match[] = {

Remove it to avoid introducing a warning when -Wunused-const-variable
gets enabled by default:

Fixes: 4ed0915f5b ("ASoC: codecs: Add RK3308 internal audio codec driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://msgid.link/r/20240404095755.650364-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04 12:59:41 +01:00
Vijendar Mukunda
b9846a3867
ASoC: SOF: amd: fix for false dsp interrupts
Before ACP firmware loading, DSP interrupts are not expected.
Sometimes after reboot, it's observed that before ACP firmware is loaded
false DSP interrupt is reported.
Registering the interrupt handler before acp initialization causing false
interrupts sometimes on reboot as ACP reset is not applied.
Correct the sequence by invoking acp initialization sequence prior to
registering interrupt handler.

Fixes: 738a2b5e2c ("ASoC: SOF: amd: Add IPC support for ACP IP block")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240404041717.430545-1-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-04-04 12:59:29 +01:00
Krzysztof Kozlowski
e798845d68 pinctrl: sunxi: sun9i-a80-r: drop driver owner assignment
Core in platform_driver_register() already sets the .owner, so driver
does not need to.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Chen-Yu Tsai <wens@csie.org>
Message-ID: <20240330210954.100842-1-krzysztof.kozlowski@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:39:47 +02:00
Andy Shevchenko
4aad0ad20f pinctrl: aw9523: Fix indentation in a few places
In the comment, function prototype, and array of strings indentation
is kinda broken. Reindent that.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-11-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:46 +02:00
Andy Shevchenko
7b8b9b5450 pinctrl: aw9523: Sort headers and group pinctrl/*
One header was misplaced and group pinctrl/* ones to show the relation
with the pin control subsystem.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-10-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:46 +02:00
Andy Shevchenko
c567b00cc3 pinctrl: aw9523: Make use of dev_err_probe()
Simplify the error handling in probe function by switching from
dev_err() to dev_err_probe().

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-9-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:46 +02:00
Andy Shevchenko
6bf270863a pinctrl: aw9523: Remove unused irqchip field in struct aw9523_irq
The irqchip field is allocated, assigned but never used. Remove it.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-8-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:46 +02:00
Andy Shevchenko
4210ef801a pinctrl: aw9523: Get rid of redundant ' & U8_MAX' pieces
When the variable is declared as u8, no need to perform ' & U8_MAX'
as it's implied anyway.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-7-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:46 +02:00
Andy Shevchenko
66413f0468 pinctrl: aw9523: Use temporary variable for HW IRQ number
There are two different ways on how to get HW IRQ number in some functions.
Unify that by using temporary variable and irqd_to_hwirq() call.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-6-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:46 +02:00
Andy Shevchenko
418ee9488f pinctrl: aw9523: Make use of struct pinfunction and PINCTRL_PINFUNCTION()
Since pin control provides a generic data type and a macro for
the pin function definition, use them in the driver.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-5-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:46 +02:00
Andy Shevchenko
091655b928 pinctrl: aw9523: Always try both ports in aw9523_gpio_set_multiple()
The ports are equivalent from the user's point of view. Don't limit
trying them both if writing to one fails.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-4-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:46 +02:00
Andy Shevchenko
f91eafcb18 pinctrl: aw9523: Use correct error code for not supported functionality
The pin control subsystem internally uses ENOTSUPP for the not supported
functionality. The checkpatch is false positive about this error code.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-3-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:46 +02:00
Andy Shevchenko
e5e8a58023 pinctrl: aw9523: Destroy mutex on ->remove()
If aw9523_hw_init() fails on ->remove() the mutex left alive.
Destroy it in that case as well. While at it, remove never
true check at the beginning of the function.

Signed-off-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Message-ID: <20240329105634.712457-2-andy.shevchenko@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2024-04-04 13:16:45 +02:00
Maulik Shah
02e2a4b363 cpuidle: psci: Update init level to core_initcall()
Clients like regulators, interconnects and clocks depend on rpmh-rsc to
vote on resources and rpmh-rsc depends on psci power-domains to complete
probe. All of them are in core_initcall().

Change psci domain init level to core_initcall() to avoid probe defer from
all of the above.

Signed-off-by: Maulik Shah <quic_mkshah@quicinc.com>
Link: https://lore.kernel.org/r/20240217-init_level-v1-2-bde9e11f8317@quicinc.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-04 13:02:28 +02:00
Ulf Hansson
d72d7d6cf7 cpuidle: psci: Drop superfluous wrappers psci_dt_attach|detach_cpu()
To simplify the code, let's drop psci_dt_attach|detach_cpu() and use the
common dt_idle_attach|detach_cpu() directly instead.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240228151139.2650258-1-ulf.hansson@linaro.org
2024-04-04 13:00:39 +02:00
Laine Taffin Altman
49ceae68a0 rust: init: remove impl Zeroable for Infallible
In Rust, producing an invalid value of any type is immediate undefined
behavior (UB); this includes via zeroing memory.  Therefore, since an
uninhabited type has no valid values, producing any values at all for it is
UB.

The Rust standard library type `core::convert::Infallible` is uninhabited,
by virtue of having been declared as an enum with no cases, which always
produces uninhabited types in Rust.

The current kernel code allows this UB to be triggered, for example by code
like `Box::<core::convert::Infallible>::init(kernel::init::zeroed())`.

Thus, remove the implementation of `Zeroable` for `Infallible`, thereby
avoiding the unsoundness (potential for future UB).

Cc: stable@vger.kernel.org
Fixes: 38cde0bd7b ("rust: init: add `Zeroable` trait and `init::zeroed` function")
Closes: https://github.com/Rust-for-Linux/pinned-init/pull/13
Signed-off-by: Laine Taffin Altman <alexanderaltman@me.com>
Reviewed-by: Alice Ryhl <aliceryhl@google.com>
Reviewed-by: Boqun Feng <boqun.feng@gmail.com>
Reviewed-by: Benno Lossin <benno.lossin@proton.me>
Link: https://lore.kernel.org/r/CA160A4E-561E-4918-837E-3DCEBA74F808@me.com
[ Reformatted the comment slightly. ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
2024-04-04 12:56:16 +02:00
Christophe JAILLET
c120209bce net: dsa: sja1105: Fix parameters order in sja1110_pcs_mdio_write_c45()
The definition and declaration of sja1110_pcs_mdio_write_c45() don't have
parameters in the same order.

Knowing that sja1110_pcs_mdio_write_c45() is used as a function pointer
in 'sja1105_info' structure with .pcs_mdio_write_c45, and that we have:

   int (*pcs_mdio_write_c45)(struct mii_bus *bus, int phy, int mmd,
				  int reg, u16 val);

it is likely that the definition is the one to change.

Found with cppcheck, funcArgOrderDifferent.

Fixes: ae271547bb ("net: dsa: sja1105: C45 only transactions for PCS")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/ff2a5af67361988b3581831f7bd1eddebfb4c48f.1712082763.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-04 12:51:45 +02:00
Paul Barker
101b76418d net: ravb: Always update error counters
The error statistics should be updated each time the poll function is
called, even if the full RX work budget has been consumed. This prevents
the counts from becoming stuck when RX bandwidth usage is high.

This also ensures that error counters are not updated after we've
re-enabled interrupts as that could result in a race condition.

Also drop an unnecessary space.

Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240402145305.82148-2-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-04 12:46:13 +02:00
Paul Barker
596a425491 net: ravb: Always process TX descriptor ring
The TX queue should be serviced each time the poll function is called,
even if the full RX work budget has been consumed. This prevents
starvation of the TX queue when RX bandwidth usage is high.

Fixes: c156633f13 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Reviewed-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Link: https://lore.kernel.org/r/20240402145305.82148-1-paul.barker.ct@bp.renesas.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-04-04 12:46:13 +02:00
Krzysztof Kozlowski
565759ce81 wifi: ath6kl: sdio: simplify module initialization
This driver's initialization functions do not perform any custom code,
except printing messages.  Printing messages on modules
loading/unloading is discouraged because it pollutes the dmesg
regardless whether user actually has this device.  Core kernel code
already gives tools to investigate whether module was loaded or not.

Drop the printing messages which allows to replace open-coded
module_sdio_driver().

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240329171019.63836-2-krzysztof.kozlowski@linaro.org
2024-04-04 13:12:57 +03:00
Gustavo A. R. Silva
cbb0697e0d wifi: wil6210: wmi: Use __counted_by() in struct wmi_set_link_monitor_cmd and avoid -Wfamnae warning
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).

Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.

So, use the `DEFINE_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.

So, with these changes, fix the following warning:
drivers/net/wireless/ath/wil6210/wmi.c:4018:49: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/ZgSTCmdP+omePvWg@neat
2024-04-04 13:12:20 +03:00
Gustavo A. R. Silva
34c34c242a wifi: wil6210: cfg80211: Use __counted_by() in struct wmi_start_scan_cmd and avoid some -Wfamnae warnings
Prepare for the coming implementation by GCC and Clang of the
__counted_by attribute. Flexible array members annotated with
__counted_by can have their accesses bounds-checked at run-time
via CONFIG_UBSAN_BOUNDS (for array indexing) and CONFIG_FORTIFY_SOURCE
(for strcpy/memcpy-family functions).

Also, -Wflex-array-member-not-at-end is coming in GCC-14, and we are
getting ready to enable it globally.

So, use the `DEFINE_FLEX()` helper for an on-stack definition of
a flexible structure where the size of the flexible-array member
is known at compile-time, and refactor the rest of the code,
accordingly.

So, with these changes, fix the following warning:
drivers/net/wireless/ath/wil6210/cfg80211.c:896:43: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]

Link: https://github.com/KSPP/linux/issues/202
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/ZgSP/CMSVfr68R2u@neat
2024-04-04 13:11:27 +03:00
Jeff Johnson
024c4ab041 wifi: ath12k: fix hal_rx_buf_return_buf_manager documentation
kernel-doc flagged the following issue, so fix it:

drivers/net/wireless/ath/ath12k/hal.h:771: warning: missing initial short description on line:
 * enum hal_rx_buf_return_buf_manager

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240329-hal_rx_buf_return_buf_manager-v1-2-e62ec9dc2af9@quicinc.com
2024-04-04 13:10:48 +03:00
Jeff Johnson
68d1beaf3e wifi: ath11k: fix hal_rx_buf_return_buf_manager documentation
kernel-doc flagged the following issue, so fix it:

drivers/net/wireless/ath/ath11k/hal.h:668: warning: missing initial short description on line:
 * enum hal_rx_buf_return_buf_manager

Signed-off-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240329-hal_rx_buf_return_buf_manager-v1-1-e62ec9dc2af9@quicinc.com
2024-04-04 13:10:47 +03:00
Arnd Bergmann
61752ac69b wifi: ath9k: work around memset overflow warning
gcc-9 and some other older versions produce a false-positive warning
for zeroing two fields

In file included from include/linux/string.h:369,
                 from drivers/net/wireless/ath/ath9k/main.c:18:
In function 'fortify_memset_chk',
    inlined from 'ath9k_ps_wakeup' at drivers/net/wireless/ath/ath9k/main.c:140:3:
include/linux/fortify-string.h:462:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  462 |                         __write_overflow_field(p_size_field, size);
      |                         ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Using a struct_group seems to reliably avoid the warning and
not make the code much uglier. The combined memset() should even
save a couple of cpu cycles.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240328135509.3755090-3-arnd@kernel.org
2024-04-04 13:09:45 +03:00
Arnd Bergmann
066afafc10 wifi: carl9170: re-fix fortified-memset warning
The carl9170_tx_release() function sometimes triggers a fortified-memset
warning in my randconfig builds:

In file included from include/linux/string.h:254,
                 from drivers/net/wireless/ath/carl9170/tx.c:40:
In function 'fortify_memset_chk',
    inlined from 'carl9170_tx_release' at drivers/net/wireless/ath/carl9170/tx.c:283:2,
    inlined from 'kref_put' at include/linux/kref.h:65:3,
    inlined from 'carl9170_tx_put_skb' at drivers/net/wireless/ath/carl9170/tx.c:342:9:
include/linux/fortify-string.h:493:25: error: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Werror=attribute-warning]
  493 |                         __write_overflow_field(p_size_field, size);

Kees previously tried to avoid this by using memset_after(), but it seems
this does not fully address the problem. I noticed that the memset_after()
here is done on a different part of the union (status) than the original
cast was from (rate_driver_data), which may confuse the compiler.

Unfortunately, the memset_after() trick does not work on driver_rates[]
because that is part of an anonymous struct, and I could not get
struct_group() to do this either. Using two separate memset() calls
on the two members does address the warning though.

Fixes: fb5f6a0e80 ("mac80211: Use memset_after() to clear tx status")
Link: https://lore.kernel.org/lkml/20230623152443.2296825-1-arnd@kernel.org/
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240328135509.3755090-2-arnd@kernel.org
2024-04-04 13:09:45 +03:00
Miaoqing Pan
2adcddd8a3 wifi: ath12k: fix missing endianness conversion in wmi_vdev_create_cmd()
The WMI commands are in little endian byte order, fix missing endianness
conversion in wmi_vdev_create_cmd.

Tested-on: WCN7850 hw2.0 WLAN.IOE_HMT.1.0.2-00240-QCAHMTSWPL_V1.0_V2.0_SILICON-1

Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240322003726.2016208-1-quic_miaoqing@quicinc.com
2024-04-04 13:08:10 +03:00
Ramya Gnanasekar
f51d917b73 wifi: ath12k: debugfs: radar simulation support
Create dfs_simulate_radar debugfs in ath12k debugfs directory.

Usage:

echo 1 > /sys/kernel/debug/ath12k/pci-0000:06:00.0/mac0/dfs_simulate_radar

This debugfs helps user to simulate RADAR interference in run time.

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240320171305.655288-3-quic_rgnanase@quicinc.com
2024-04-04 13:07:06 +03:00
Ramasamy Kaliappan
f8bde02a26 wifi: ath12k: initial debugfs support
The initial debugfs infra bringup in ath12k driver and create the ath12k debugfs
and soc-specific directories in /sys/kernel/debug/

For each ath12k device, directory will be created in <bus>-<devname>
schema under ath12k root directory.

Example with one ath12k device:
/sys/kernel/debug/ath12k/pci-0000:06:00.0

ath12k
`-- pci-0000:06:00.0
    |-- mac0

To enable ath12k debugfs support (CONFIG_ATH12K_DEBUGFS=y)

Tested-on: QCN9274 hw2.0 PCI WLAN.WBE.1.0.1-00029-QCAHKSWPL_SILICONZ-1

Signed-off-by: Ramasamy Kaliappan <quic_rkaliapp@quicinc.com>
Signed-off-by: Ramya Gnanasekar <quic_rgnanase@quicinc.com>
Acked-by: Jeff Johnson <quic_jjohnson@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://msgid.link/20240320171305.655288-2-quic_rgnanase@quicinc.com
2024-04-04 13:07:06 +03:00
Johnson Wang
b1d4c60cbc pmdomain: mediatek: Add MT8188 buck isolation setting
Add buck isolation setting to ADSP_AO, CAM_VCORE and IMG_VCORE power
domains in MT8188 for proper buck isolation control in power domain
on/off.

Signed-off-by: Johnson Wang <johnson.wang@mediatek.com>
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240329044142.3095193-1-fshao@chromium.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-04 11:45:36 +02:00
Krzysztof Kozlowski
07623f57e4 pmdomain: mediatek: scpsys: drop driver owner assignment
Core in platform_driver_register() already sets the .owner, so driver
does not need to.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20240330211036.100956-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-04 11:44:54 +02:00
Pablo Neira Ayuso
1bc83a019b netfilter: nf_tables: discard table flag update with pending basechain deletion
Hook unregistration is deferred to the commit phase, same occurs with
hook updates triggered by the table dormant flag. When both commands are
combined, this results in deleting a basechain while leaving its hook
still registered in the core.

Fixes: 179d9ba555 ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04 11:38:35 +02:00
Ziyang Xuan
24225011d8 netfilter: nf_tables: Fix potential data-race in __nft_flowtable_type_get()
nft_unregister_flowtable_type() within nf_flow_inet_module_exit() can
concurrent with __nft_flowtable_type_get() within nf_tables_newflowtable().
And thhere is not any protection when iterate over nf_tables_flowtables
list in __nft_flowtable_type_get(). Therefore, there is pertential
data-race of nf_tables_flowtables list entry.

Use list_for_each_entry_rcu() to iterate over nf_tables_flowtables list
in __nft_flowtable_type_get(), and use rcu_read_lock() in the caller
nft_flowtable_type_get() to protect the entire type query process.

Fixes: 3b49e2e94e ("netfilter: nf_tables: add flow table netlink frontend")
Signed-off-by: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04 11:38:34 +02:00
Pablo Neira Ayuso
994209ddf4 netfilter: nf_tables: reject new basechain after table flag update
When dormant flag is toggled, hooks are disabled in the commit phase by
iterating over current chains in table (existing and new).

The following configuration allows for an inconsistent state:

  add table x
  add chain x y { type filter hook input priority 0; }
  add table x { flags dormant; }
  add chain x w { type filter hook input priority 1; }

which triggers the following warning when trying to unregister chain w
which is already unregistered.

[  127.322252] WARNING: CPU: 7 PID: 1211 at net/netfilter/core.c:50                                                                     1 __nf_unregister_net_hook+0x21a/0x260
[...]
[  127.322519] Call Trace:
[  127.322521]  <TASK>
[  127.322524]  ? __warn+0x9f/0x1a0
[  127.322531]  ? __nf_unregister_net_hook+0x21a/0x260
[  127.322537]  ? report_bug+0x1b1/0x1e0
[  127.322545]  ? handle_bug+0x3c/0x70
[  127.322552]  ? exc_invalid_op+0x17/0x40
[  127.322556]  ? asm_exc_invalid_op+0x1a/0x20
[  127.322563]  ? kasan_save_free_info+0x3b/0x60
[  127.322570]  ? __nf_unregister_net_hook+0x6a/0x260
[  127.322577]  ? __nf_unregister_net_hook+0x21a/0x260
[  127.322583]  ? __nf_unregister_net_hook+0x6a/0x260
[  127.322590]  ? __nf_tables_unregister_hook+0x8a/0xe0 [nf_tables]
[  127.322655]  nft_table_disable+0x75/0xf0 [nf_tables]
[  127.322717]  nf_tables_commit+0x2571/0x2620 [nf_tables]

Fixes: 179d9ba555 ("netfilter: nf_tables: fix table flag updates")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04 11:34:42 +02:00
Pablo Neira Ayuso
24cea96770 netfilter: nf_tables: flush pending destroy work before exit_net release
Similar to 2c9f029328 ("netfilter: nf_tables: flush pending destroy
work before netlink notifier") to address a race between exit_net and
the destroy workqueue.

The trace below shows an element to be released via destroy workqueue
while exit_net path (triggered via module removal) has already released
the set that is used in such transaction.

[ 1360.547789] BUG: KASAN: slab-use-after-free in nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.547861] Read of size 8 at addr ffff888140500cc0 by task kworker/4:1/152465
[ 1360.547870] CPU: 4 PID: 152465 Comm: kworker/4:1 Not tainted 6.8.0+ #359
[ 1360.547882] Workqueue: events nf_tables_trans_destroy_work [nf_tables]
[ 1360.547984] Call Trace:
[ 1360.547991]  <TASK>
[ 1360.547998]  dump_stack_lvl+0x53/0x70
[ 1360.548014]  print_report+0xc4/0x610
[ 1360.548026]  ? __virt_addr_valid+0xba/0x160
[ 1360.548040]  ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 1360.548054]  ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548176]  kasan_report+0xae/0xe0
[ 1360.548189]  ? nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548312]  nf_tables_trans_destroy_work+0x3f5/0x590 [nf_tables]
[ 1360.548447]  ? __pfx_nf_tables_trans_destroy_work+0x10/0x10 [nf_tables]
[ 1360.548577]  ? _raw_spin_unlock_irq+0x18/0x30
[ 1360.548591]  process_one_work+0x2f1/0x670
[ 1360.548610]  worker_thread+0x4d3/0x760
[ 1360.548627]  ? __pfx_worker_thread+0x10/0x10
[ 1360.548640]  kthread+0x16b/0x1b0
[ 1360.548653]  ? __pfx_kthread+0x10/0x10
[ 1360.548665]  ret_from_fork+0x2f/0x50
[ 1360.548679]  ? __pfx_kthread+0x10/0x10
[ 1360.548690]  ret_from_fork_asm+0x1a/0x30
[ 1360.548707]  </TASK>

[ 1360.548719] Allocated by task 192061:
[ 1360.548726]  kasan_save_stack+0x20/0x40
[ 1360.548739]  kasan_save_track+0x14/0x30
[ 1360.548750]  __kasan_kmalloc+0x8f/0xa0
[ 1360.548760]  __kmalloc_node+0x1f1/0x450
[ 1360.548771]  nf_tables_newset+0x10c7/0x1b50 [nf_tables]
[ 1360.548883]  nfnetlink_rcv_batch+0xbc4/0xdc0 [nfnetlink]
[ 1360.548909]  nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink]
[ 1360.548927]  netlink_unicast+0x367/0x4f0
[ 1360.548935]  netlink_sendmsg+0x34b/0x610
[ 1360.548944]  ____sys_sendmsg+0x4d4/0x510
[ 1360.548953]  ___sys_sendmsg+0xc9/0x120
[ 1360.548961]  __sys_sendmsg+0xbe/0x140
[ 1360.548971]  do_syscall_64+0x55/0x120
[ 1360.548982]  entry_SYSCALL_64_after_hwframe+0x55/0x5d

[ 1360.548994] Freed by task 192222:
[ 1360.548999]  kasan_save_stack+0x20/0x40
[ 1360.549009]  kasan_save_track+0x14/0x30
[ 1360.549019]  kasan_save_free_info+0x3b/0x60
[ 1360.549028]  poison_slab_object+0x100/0x180
[ 1360.549036]  __kasan_slab_free+0x14/0x30
[ 1360.549042]  kfree+0xb6/0x260
[ 1360.549049]  __nft_release_table+0x473/0x6a0 [nf_tables]
[ 1360.549131]  nf_tables_exit_net+0x170/0x240 [nf_tables]
[ 1360.549221]  ops_exit_list+0x50/0xa0
[ 1360.549229]  free_exit_list+0x101/0x140
[ 1360.549236]  unregister_pernet_operations+0x107/0x160
[ 1360.549245]  unregister_pernet_subsys+0x1c/0x30
[ 1360.549254]  nf_tables_module_exit+0x43/0x80 [nf_tables]
[ 1360.549345]  __do_sys_delete_module+0x253/0x370
[ 1360.549352]  do_syscall_64+0x55/0x120
[ 1360.549360]  entry_SYSCALL_64_after_hwframe+0x55/0x5d

(gdb) list *__nft_release_table+0x473
0x1e033 is in __nft_release_table (net/netfilter/nf_tables_api.c:11354).
11349           list_for_each_entry_safe(flowtable, nf, &table->flowtables, list) {
11350                   list_del(&flowtable->list);
11351                   nft_use_dec(&table->use);
11352                   nf_tables_flowtable_destroy(flowtable);
11353           }
11354           list_for_each_entry_safe(set, ns, &table->sets, list) {
11355                   list_del(&set->list);
11356                   nft_use_dec(&table->use);
11357                   if (set->flags & (NFT_SET_MAP | NFT_SET_OBJECT))
11358                           nft_map_deactivate(&ctx, set);
(gdb)

[ 1360.549372] Last potentially related work creation:
[ 1360.549376]  kasan_save_stack+0x20/0x40
[ 1360.549384]  __kasan_record_aux_stack+0x9b/0xb0
[ 1360.549392]  __queue_work+0x3fb/0x780
[ 1360.549399]  queue_work_on+0x4f/0x60
[ 1360.549407]  nft_rhash_remove+0x33b/0x340 [nf_tables]
[ 1360.549516]  nf_tables_commit+0x1c6a/0x2620 [nf_tables]
[ 1360.549625]  nfnetlink_rcv_batch+0x728/0xdc0 [nfnetlink]
[ 1360.549647]  nfnetlink_rcv+0x1a8/0x1e0 [nfnetlink]
[ 1360.549671]  netlink_unicast+0x367/0x4f0
[ 1360.549680]  netlink_sendmsg+0x34b/0x610
[ 1360.549690]  ____sys_sendmsg+0x4d4/0x510
[ 1360.549697]  ___sys_sendmsg+0xc9/0x120
[ 1360.549706]  __sys_sendmsg+0xbe/0x140
[ 1360.549715]  do_syscall_64+0x55/0x120
[ 1360.549725]  entry_SYSCALL_64_after_hwframe+0x55/0x5d

Fixes: 0935d55884 ("netfilter: nf_tables: asynchronous release")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04 11:34:42 +02:00
Pablo Neira Ayuso
0d459e2ffb netfilter: nf_tables: release mutex after nft_gc_seq_end from abort path
The commit mutex should not be released during the critical section
between nft_gc_seq_begin() and nft_gc_seq_end(), otherwise, async GC
worker could collect expired objects and get the released commit lock
within the same GC sequence.

nf_tables_module_autoload() temporarily releases the mutex to load
module dependencies, then it goes back to replay the transaction again.
Move it at the end of the abort phase after nft_gc_seq_end() is called.

Cc: stable@vger.kernel.org
Fixes: 720344340f ("netfilter: nf_tables: GC transaction race with abort path")
Reported-by: Kuan-Ting Chen <hexrabbit@devco.re>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04 11:34:42 +02:00
Pablo Neira Ayuso
a45e688957 netfilter: nf_tables: release batch on table validation from abort path
Unlike early commit path stage which triggers a call to abort, an
explicit release of the batch is required on abort, otherwise mutex is
released and commit_list remains in place.

Add WARN_ON_ONCE to ensure commit_list is empty from the abort path
before releasing the mutex.

After this patch, commit_list is always assumed to be empty before
grabbing the mutex, therefore

  03c1f1ef15 ("netfilter: Cleanup nft_net->module_list from nf_tables_exit_net()")

only needs to release the pending modules for registration.

Cc: stable@vger.kernel.org
Fixes: c0391b6ab8 ("netfilter: nf_tables: missing validation from the abort path")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2024-04-04 11:34:41 +02:00
Xiongwei Song
ff99b18fee mm/slub: simplify get_partial_node()
The break conditions for filling cpu partial can be more readable and
simple.

If slub_get_cpu_partial() returns 0, we can confirm that we don't need
to fill cpu partial, then we should break from the loop. On the other
hand, we also should break from the loop if we have added enough cpu
partial slabs.

Meanwhile, the logic above gets rid of the #ifdef and also fixes a weird
corner case that if we set cpu_partial_slabs to 0 from sysfs, we still
allocate at least one here.

Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2024-04-04 11:29:26 +02:00
Ulf Hansson
bce42d6108 mmc: Merge branch fixes into next
Merge the mmc fixes for v6.9-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.10.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-04 11:12:45 +02:00
Thorsten Blum
11cca8ccf2 tty: xtensa/iss: Use min() to fix Coccinelle warning
Inline strlen() and use min() to fix the following Coccinelle/coccicheck
warning reported by minmax.cocci:

	WARNING opportunity for min()

Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Message-Id: <20240404075811.6936-3-thorsten.blum@toblux.com>
Reviewed-by: Jiri Slaby <jirislaby@kernel.org>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
2024-04-04 02:10:44 -07:00
Xiongwei Song
721a2f8be1 mm/slub: add slub_get_cpu_partial() helper
Add slub_get_cpu_partial() and dummy function to help improve
get_partial_node(). It can help remove #ifdef of CONFIG_SLUB_CPU_PARTIAL
and improve filling cpu partial logic.

Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2024-04-04 11:10:35 +02:00
Xiongwei Song
acc8f4dbf1 mm/slub: remove the check of !kmem_cache_has_cpu_partial()
The check of !kmem_cache_has_cpu_partial(s) with
CONFIG_SLUB_CPU_PARTIAL enabled here is always false.

We have already checked kmem_cache_debug() earlier and if it was true,
then we either continued or broke from the loop so we can't reach this
code in that case and don't need to check kmem_cache_debug() as part of
kmem_cache_has_cpu_partial() again. Here we can remove it.

Signed-off-by: Xiongwei Song <xiongwei.song@windriver.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
2024-04-04 11:10:35 +02:00
Krzysztof Kozlowski
fbd4219fd6 wifi: wfx: drop driver owner initialization
Core in sdio_register_driver() already sets the .owner, so driver does
not need to.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Kalle Valo <kvalo@kernel.org>
Link: https://lore.kernel.org/r/20240403-module-owner-sdio-v2-7-ae46d6b955eb@linaro.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2024-04-04 11:09:12 +02:00