Commit graph

1,308,922 commits

Author SHA1 Message Date
I Gede Agastya Darma Laksana
1576f263ee ALSA: hda/realtek: Update Panasonic CF-SZ6 quirk to support headset with microphone
This patch addresses an issue with the Panasonic CF-SZ6's existing quirk,
specifically its headset microphone functionality. Previously, the quirk
used ALC269_FIXUP_HEADSET_MODE, which does not support the CF-SZ6's design
of a single 3.5mm jack for both mic and audio output effectively. The
device uses pin 0x19 for the headset mic without jack detection.

Following verification on the CF-SZ6 and discussions with the original
patch author, i determined that the update to
ALC269_FIXUP_ASPIRE_HEADSET_MIC is the appropriate solution. This change
is custom-designed for the CF-SZ6's unique hardware setup, which includes
a single 3.5mm jack for both mic and audio output, connecting the headset
microphone to pin 0x19 without the use of jack detection.

Fixes: 0fca97a29b ("ALSA: hda/realtek - Add Panasonic CF-SZ6 headset jack quirk")
Signed-off-by: I Gede Agastya Darma Laksana <gedeagas22@gmail.com>
Cc: <stable@vger.kernel.org>
Message-ID: <20240401174602.14133-1-gedeagas22@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-02 08:06:55 +02:00
Christian Bendiksen
b67a7dc418 ALSA: hda/realtek: Add sound quirks for Lenovo Legion slim 7 16ARHA7 models
This fixes the sound not working from internal speakers on
Lenovo Legion Slim 7 16ARHA7 models. The correct subsystem ID
have been added to cs35l41_hda_property.c and patch_realtek.c.

Signed-off-by: Christian Bendiksen <christian@bendiksen.me>
Cc: <stable@vger.kernel.org>
Message-ID: <20240401122603.6634-1-christian@bendiksen.me>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-02 08:01:33 +02:00
Oswald Buddenhagen
03f56ed4ea Revert "ALSA: emu10k1: fix synthesizer sample playback position and caching"
As already anticipated in the original commit, playback was broken for
very short samples. I just didn't expect it to be an actual problem,
because we're talking about less than 1.5 milliseconds here. But clearly
such wavetable samples do actually exist.

The problem was that for such short samples we'd set the current
position beyond the end of the loop, so we'd run off the end of the
sample and play garbage.
This is a bigger (more audible) problem than the original one, which was
that we'd start playback with garbage (whatever was still in the cache),
which would be mostly masked by the note's attack phase.

So revert to the old behavior for now. We'll subsequently fix it
properly with a bigger patch series.
Note that this isn't a full revert - the dead code is not re-introduced,
because that would be silly.

Fixes: df335e9a8b ("ALSA: emu10k1: fix synthesizer sample playback position and caching")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=218625
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Message-ID: <20240401145805.528794-1-oswald.buddenhagen@gmx.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-04-02 07:55:00 +02:00
Mika Westerberg
c032cdd48b thunderbolt: Do not create DisplayPort tunnels on adapters of the same router
Probably due to a firmware bug Dell TB16 dock announces that one of its
DisplayPort adapters is actually DP IN. Now this is possible and used
with some external GPUs but not likely in this case as we are dealing
with a dock. Anyways the problem is that the driver tries to create a
DisplayPort tunnel between adapters of the same router which then shows
to user that there is no picture on the display (because there are no
available DP OUT adapters on the dock anymore).

Fix this by not creating DisplayPort tunnels between adapters that are
on the same router.

Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/10265
Fixes: 274baf695b ("thunderbolt: Add DP IN added last in the head of the list of DP resources")
Cc: Gil Fine <gil.fine@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
2024-04-02 08:51:12 +03:00
Kent Overstreet
c42cd606e4 bcachefs: fix nocow lock deadlock
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
2024-04-02 01:04:10 -04:00
Eric Dumazet
5fc68320c1 ipv6: remove RTNL protection from inet6_dump_fib()
No longer hold RTNL while calling inet6_dump_fib().

Also change return value for a completed dump,
so that NLMSG_DONE can be appended to current skb,
saving one recvmsg() system call.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20240329183053.644630-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:44:57 -07:00
Jakub Kicinski
edaa34e68c Merge branch 'genetlink-remove-linux-genetlink-h'
Jakub Kicinski says:

====================
genetlink: remove linux/genetlink.h

There are two genetlink headers net/genetlink.h and linux/genetlink.h
This is similar to netlink.h, but for netlink.h both contain good
amount of code. For genetlink.h the linux/ version is leftover
from before uAPI headers were split out, it has 10 lines of code.
Move those 10 lines into other appropriate headers and delete
linux/genetlink.h.

I occasionally open the wrong header in the editor when coding,
I guess I'm not the only one.

v2: https://lore.kernel.org/all/20240325173716.2390605-1-kuba@kernel.org/
v1: https://lore.kernel.org/all/20240309183458.3014713-1-kuba@kernel.org
====================

Link: https://lore.kernel.org/r/20240329175710.291749-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:44:36 -07:00
Jakub Kicinski
cd7209628c genetlink: remove linux/genetlink.h
genetlink.h is a shell of what used to be a combined uAPI
and kernel header over a decade ago. It has fewer than
10 lines of code. Merge it into net/genetlink.h.
In some ways it'd be better to keep the combined header
under linux/ but it would make looking through git history
harder.

Acked-by: Sven Eckelmann <sven@narfation.org>
Link: https://lore.kernel.org/r/20240329175710.291749-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:44:34 -07:00
Jakub Kicinski
f97c9b533a net: openvswitch: remove unnecessary linux/genetlink.h include
The only legit reason I could think of for net/genetlink.h
and linux/genetlink.h to be separate would be if one was
included by other headers and we wanted to keep it lightweight.
That is not the case, net/openvswitch/meter.h includes
linux/genetlink.h but for no apparent reason (for struct genl_family
perhaps? it's not necessary, types of externs do not need
to be known).

Link: https://lore.kernel.org/r/20240329175710.291749-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:44:34 -07:00
Jakub Kicinski
5bc63d3a6f netlink: create a new header for internal genetlink symbols
There are things in linux/genetlink.h which are only used
under net/netlink/. Move them to a new local header.
A new header with just 2 externs isn't great, but alternative
would be to include af_netlink.h in genetlink.c which feels
even worse.

Link: https://lore.kernel.org/r/20240329175710.291749-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:44:34 -07:00
Jakub Kicinski
092ca10741 Merge branch '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-03-29 (net: intel)

This series contains updates to most Intel drivers.

Jesse moves declaration of pci_driver struct to remove need for forward
declarations in igb and converts Intel drivers to user newer power
management ops.

Sasha reworks power management flow on igc to avoid using rtnl_lock()
during those flows.

Maciej reorganizes i40e_nvm file to avoid forward declarations.

* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
  i40e: avoid forward declarations in i40e_nvm.c
  igc: Refactor runtime power management flow
  net: intel: implement modern PM ops declarations
  igb: simplify pci ops declaration
====================

Link: https://lore.kernel.org/r/20240329175632.211340-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:44:12 -07:00
Ivan Vecera
ea2a1cfc3b i40e: Fix VF MAC filter removal
Commit 73d9629e1c ("i40e: Do not allow untrusted VF to remove
administratively set MAC") fixed an issue where untrusted VF was
allowed to remove its own MAC address although this was assigned
administratively from PF. Unfortunately the introduced check
is wrong because it causes that MAC filters for other MAC addresses
including multi-cast ones are not removed.

<snip>
	if (ether_addr_equal(addr, vf->default_lan_addr.addr) &&
	    i40e_can_vf_change_mac(vf))
		was_unimac_deleted = true;
	else
		continue;

	if (i40e_del_mac_filter(vsi, al->list[i].addr)) {
	...
</snip>

The else path with `continue` effectively skips any MAC filter
removal except one for primary MAC addr when VF is allowed to do so.
Fix the check condition so the `continue` is only done for primary
MAC address.

Fixes: 73d9629e1c ("i40e: Do not allow untrusted VF to remove administratively set MAC")
Signed-off-by: Ivan Vecera <ivecera@redhat.com>
Reviewed-by: Michal Schmidt <mschmidt@redhat.com>
Reviewed-by: Brett Creeley <brett.creeley@amd.com>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240329180638.211412-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:33:08 -07:00
Eric Dumazet
1eeb504357 tcp/dccp: do not care about families in inet_twsk_purge()
We lost ability to unload ipv6 module a long time ago.

Instead of calling expensive inet_twsk_purge() twice,
we can handle all families in one round.

Also remove an extra line added in my prior patch,
per Kuniyuki Iwashima feedback.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/netdev/20240327192934.6843-1-kuniyu@amazon.com/
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240329153203.345203-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:27:58 -07:00
Eric Dumazet
58169ec9c4 inet: preserve const qualifier in inet_csk()
We can change inet_csk() to propagate its argument const qualifier,
thanks to container_of_const().

We have to fix few places that had mistakes, like tcp_bound_rto().

Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240329144931.295800-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:27:08 -07:00
Jakub Kicinski
513bebc4de Merge branch 'doc-netlink-add-hyperlinks-to-generated-docs'
Donald Hunter says:

====================
doc: netlink: Add hyperlinks to generated docs

Extend ynl-gen-rst to generate hyperlinks to definitions, attribute sets
and sub-messages from all the places that reference them.
====================

Link: https://lore.kernel.org/r/20240329135021.52534-1-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:26:04 -07:00
Donald Hunter
2dddf8aaf6 doc: netlink: Update tc spec with missing definitions
The tc spec referenced tc-u32-mark and tc-act-police-attrs but did not
define them. The missing definitions were discovered when building the
docs with generated hyperlinks because the hyperlink target labels were
missing.

Add definitions for tc-u32-mark and tc-act-police-attrs.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240329135021.52534-4-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:26:02 -07:00
Donald Hunter
8c1b74a26d doc: netlink: Add hyperlinks to generated Netlink docs
Update ynl-gen-rst to generate hyperlinks to definitions, attribute
sets and sub-messages from all the places that reference them.

Note that there is a single label namespace for all of the kernel docs.
Hyperlinks within a single netlink doc need to be qualified by the
family name to avoid collisions.

The label format is 'family-type-name' which gives, for example,
'rt-link-attribute-set-link-attrs' as the link id.

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20240329135021.52534-3-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:26:02 -07:00
Donald Hunter
4cc1730a90 doc: netlink: Change generated docs to limit TOC to depth 3
The tables of contents in the generated Netlink docs include individual
attribute definitions. This can make the contents exceedingly long and
repeats a lot of what is on the rest of the pages. See for example:

https://docs.kernel.org/networking/netlink_spec/tc.html

Add a depth limit to the contents directive in generated .rst files to
limit the contents depth to 3 levels. This reduces the contents to:

 - Family
   - Summary
   - Operations
     - op-one
     - op-two
     - ...
   - Definitions
     - struct-one
     - struct-two
     - enum-one
     - ...
   - Attribute sets
     - attrs-one
     - attrs-two
     - ...

Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Breno Leitao <leitao@debian.org>
Link: https://lore.kernel.org/r/20240329135021.52534-2-donald.hunter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:26:01 -07:00
Jakub Kicinski
0323b251ce Merge branch 'mptcp-fix-fallback-mib-counter-and-wrong-var-in-selftests'
Matthieu Baerts says:

====================
mptcp: fix fallback MIB counter and wrong var in selftests

Here are two fixes related to MPTCP.

The first patch fixes when the MPTcpExtMPCapableFallbackACK MIB counter
is modified: it should only be incremented when a connection was using
MPTCP options, but then a fallback to TCP has been done. This patch also
checks the counter is not incremented by mistake during the connect
selftests. This counter was wrongly incremented since its introduction
in v5.7.

The second patch fixes a wrong parsing of the 'dev' endpoint options in
the selftests: the wrong variable was used. This option was not used
before, but it is going to be soon. This issue is visible since v5.18.
====================

Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-0-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:25:02 -07:00
Geliang Tang
40061817d9 selftests: mptcp: join: fix dev in check_endpoint
There's a bug in pm_nl_check_endpoint(), 'dev' didn't be parsed correctly.
If calling it in the 2nd test of endpoint_tests() too, it fails with an
error like this:

 creation  [FAIL] expected '10.0.2.2 id 2 subflow dev dev' \
                     found '10.0.2.2 id 2 subflow dev ns2eth2'

The reason is '$2' should be set to 'dev', not '$1'. This patch fixes it.

Fixes: 69c6ce7b6e ("selftests: mptcp: add implicit endpoint test case")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-2-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:25:00 -07:00
Davide Caratti
7a1b3490f4 mptcp: don't account accept() of non-MPC client as fallback to TCP
Current MPTCP servers increment MPTcpExtMPCapableFallbackACK when they
accept non-MPC connections. As reported by Christoph, this is "surprising"
because the counter might become greater than MPTcpExtMPCapableSYNRX.

MPTcpExtMPCapableFallbackACK counter's name suggests it should only be
incremented when a connection was seen using MPTCP options, then a
fallback to TCP has been done. Let's do that by incrementing it when
the subflow context of an inbound MPC connection attempt is dropped.
Also, update mptcp_connect.sh kselftest, to ensure that the
above MIB does not increment in case a pure TCP client connects to a
MPTCP server.

Fixes: fc518953bc ("mptcp: add and use MIB counter infrastructure")
Cc: stable@vger.kernel.org
Reported-by: Christoph Paasch <cpaasch@apple.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/449
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/20240329-upstream-net-20240329-fallback-mib-v1-1-324a8981da48@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 21:25:00 -07:00
Paolo Abeni
fcf4692fa3 mptcp: prevent BPF accessing lowat from a subflow socket.
Alexei reported the following splat:

 WARNING: CPU: 32 PID: 3276 at net/mptcp/subflow.c:1430 subflow_data_ready+0x147/0x1c0
 Modules linked in: dummy bpf_testmod(O) [last unloaded: bpf_test_no_cfi(O)]
 CPU: 32 PID: 3276 Comm: test_progs Tainted: GO       6.8.0-12873-g2c43c33bfd23
 Call Trace:
  <TASK>
  mptcp_set_rcvlowat+0x79/0x1d0
  sk_setsockopt+0x6c0/0x1540
  __bpf_setsockopt+0x6f/0x90
  bpf_sock_ops_setsockopt+0x3c/0x90
  bpf_prog_509ce5db2c7f9981_bpf_test_sockopt_int+0xb4/0x11b
  bpf_prog_dce07e362d941d2b_bpf_test_socket_sockopt+0x12b/0x132
  bpf_prog_348c9b5faaf10092_skops_sockopt+0x954/0xe86
  __cgroup_bpf_run_filter_sock_ops+0xbc/0x250
  tcp_connect+0x879/0x1160
  tcp_v6_connect+0x50c/0x870
  mptcp_connect+0x129/0x280
  __inet_stream_connect+0xce/0x370
  inet_stream_connect+0x36/0x50
  bpf_trampoline_6442491565+0x49/0xef
  inet_stream_connect+0x5/0x50
  __sys_connect+0x63/0x90
  __x64_sys_connect+0x14/0x20

The root cause of the issue is that bpf allows accessing mptcp-level
proto_ops from a tcp subflow scope.

Fix the issue detecting the problematic call and preventing any action.

Reported-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/482
Fixes: 5684ab1a0e ("mptcp: give rcvlowat some love")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://lore.kernel.org/r/d8cb7d8476d66cb0812a6e29cd1e626869d9d53e.1711738080.git.pabeni@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 20:43:24 -07:00
Jakub Kicinski
31974122cf selftests: reuseaddr_conflict: add missing new line at the end of the output
The netdev CI runs in a VM and captures serial, so stdout and
stderr get combined. Because there's a missing new line in
stderr the test ends up corrupting KTAP:

  # Successok 1 selftests: net: reuseaddr_conflict

which should have been:

  # Success
  ok 1 selftests: net: reuseaddr_conflict

Fixes: 422d8dc6fd ("selftest: add a reuseaddr test")
Reviewed-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Link: https://lore.kernel.org/r/20240329160559.249476-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 20:42:45 -07:00
Aleksandr Mishin
96c155943a net: phy: micrel: Fix potential null pointer dereference
In lan8814_get_sig_rx() and lan8814_get_sig_tx() ptp_parse_header() may
return NULL as ptp_header due to abnormal packet type or corrupted packet.
Fix this bug by adding ptp_header check.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: ece1950283 ("net: phy: micrel: 1588 support for LAN8814 phy")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20240329061631.33199-1-amishin@t-argos.ru
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-04-01 20:41:49 -07:00
Alexei Starovoitov
8c3fe029d7 Merge branch 'x86-bpf-fixes-for-the-bpf-jit-with-retbleed-stuff'
Joan Bruguera Micó says:

====================
x86/bpf: Fixes for the BPF JIT with retbleed=stuff

From: Joan Bruguera Micó <joanbrugueram@gmail.com>

Fixes two issues that cause kernels panic when using the BPF JIT with
the call depth tracking / stuffing mitigation for Skylake processors
(`retbleed=stuff`). Both issues can be triggered by running simple
BPF programs (e.g. running the test suite should trigger both).

The first (resubmit) fixes a trivial issue related to calculating the
destination IP for call instructions with call depth tracking.

The second is related to using the correct IP for relocations, related
to the recently introduced %rip-relative addressing for PER_CPU_VAR.

Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
---
v2:
  Simplify calculation of "ip".
  Add more details to the commit message.

Joan Bruguera Micó (1):
  x86/bpf: Fix IP for relocating call depth accounting
====================

Link: https://lore.kernel.org/r/20240401185821.224068-1-ubizjak@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-01 20:37:57 -07:00
Joan Bruguera Micó
6a53745300 x86/bpf: Fix IP for relocating call depth accounting
The commit:

  59bec00ace ("x86/percpu: Introduce %rip-relative addressing to PER_CPU_VAR()")

made PER_CPU_VAR() to use rip-relative addressing, hence
INCREMENT_CALL_DEPTH macro and skl_call_thunk_template got rip-relative
asm code inside of it. A follow up commit:

  17bce3b2ae ("x86/callthunks: Handle %rip-relative relocations in call thunk template")

changed x86_call_depth_emit_accounting() to use apply_relocation(),
but mistakenly assumed that the code is being patched in-place (where
the destination of the relocation matches the address of the code),
using *pprog as the destination ip. This is not true for the call depth
accounting, emitted by the BPF JIT, so the calculated address was wrong,
JIT-ed BPF progs on kernels with call depth tracking got broken and
usually caused a page fault.

Pass the destination IP when the BPF JIT emits call depth accounting.

Fixes: 17bce3b2ae ("x86/callthunks: Handle %rip-relative relocations in call thunk template")
Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Reviewed-by: Uros Bizjak <ubizjak@gmail.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240401185821.224068-3-ubizjak@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-01 20:37:56 -07:00
Uros Bizjak
9d98aa0883 x86/bpf: Fix IP after emitting call depth accounting
Adjust the IP passed to `emit_patch` so it calculates the correct offset
for the CALL instruction if `x86_call_depth_emit_accounting` emits code.
Otherwise we will skip some instructions and most likely crash.

Fixes: b2e9dfe54b ("x86/bpf: Emit call depth accounting if required")
Link: https://lore.kernel.org/lkml/20230105214922.250473-1-joanbrugueram@gmail.com/
Co-developed-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Joan Bruguera Micó <joanbrugueram@gmail.com>
Signed-off-by: Uros Bizjak <ubizjak@gmail.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/r/20240401185821.224068-2-ubizjak@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-04-01 20:37:56 -07:00
Christian Göttsche
37801a36b4 selinux: avoid dereference of garbage after mount failure
In case kern_mount() fails and returns an error pointer return in the
error branch instead of continuing and dereferencing the error pointer.

While on it drop the never read static variable selinuxfs_mount.

Cc: stable@vger.kernel.org
Fixes: 0619f0f5e3 ("selinux: wrap selinuxfs state")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2024-04-01 23:32:35 -04:00
Christophe JAILLET
c88b50a12f ata: ahci_st: Remove an unused field in struct st_ahci_drv_data
In "struct st_ahci_drv_data", the 'ahci' field is unused.
Remove it.

Found with cppcheck, unusedStructMember.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
2024-04-02 12:18:15 +09:00
Fabio Estevam
eefb904987 ARM: dts: imx7s: Add snvs-poweroff support
Just like other i.MX devices, i.MX7 also supports using the SNVS
block to poweroff the chip.

Add an entry for it.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02 11:15:55 +08:00
Joy Zou
54c7a04ea3 arm64: dts: imx93-11x11-evk: add pca9451a support
Support pca9451a on imx93-11x11-evk.

Signed-off-by: Joy Zou <joy.zou@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02 11:07:21 +08:00
Dmitry Baryshkov
be1b7acb92 dt-bindings: display/msm: sm8150-mdss: add DP node
As Qualcomm SM8150 got support for the DisplayPort, add displayport@
node as a valid child to the MDSS node.

Fixes: 88806318e2 ("dt-bindings: display: msm: dp: declare compatible string for sm8150")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/586156/
Link: https://lore.kernel.org/r/20240402-fd-fix-schema-v3-1-817ea6ddf775@linaro.org
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
2024-04-01 20:03:48 -07:00
Marek Vasut
a196684376 arm64: dts: imx8mp: Describe CSI2 GPIO expander on i.MX8MP DHCOM PDK3 board
The production PDK3 carrier board rev.200 contains additional GPIO
expander to control power and reset signals for each CSI2 plug
separately. Describe this expander in the carrier board DT. The
label is used by sensor DTOs to reference the expander and its
signals.

Signed-off-by: Marek Vasut <marex@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02 11:03:40 +08:00
Alexander Stein
3eaf1870d7 ARM: dts: imx6qdl: Remove LCD.CONTRAST pinctrl from muxing
GPIO4_IO20 is unused on MBA6x, unless LVDS display is attached.
Remove the pinctrl for GPIO4_IO20, so it can be used otherwise.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02 10:54:51 +08:00
Alexander Stein
6dd62ce41c ARM: dts: imx6qdl: mba6: Add missing vdd-supply for on-board USB hub
This adds vdd-supply powering the USB hub.

Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2024-04-02 10:54:44 +08:00
Uwe Kleine-König
a9a7214053 hwrng: mxc-rnga - Drop usage of platform_driver_probe()
There are considerations to drop platform_driver_probe() as a concept
that isn't relevant any more today. It comes with an added complexity
that makes many users hold it wrong. (E.g. this driver should have mark
the driver struct with __refdata.)

Convert the driver to the more usual module_platform_driver().

This fixes a W=1 build warning:

	WARNING: modpost: drivers/char/hw_random/mxc-rnga: section mismatch in reference: mxc_rnga_driver+0x10 (section: .data) -> mxc_rnga_remove (section: .exit.text)

with CONFIG_HW_RANDOM_MXC_RNGA=m.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:39 +08:00
Chang S. Bae
e3299a4c1c crypto: x86/aesni - Update aesni_set_key() to return void
The aesni_set_key() implementation has no error case, yet its prototype
specifies to return an error code.

Modify the function prototype to return void and adjust the related code.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:39 +08:00
Chang S. Bae
d50b35f0c4 crypto: x86/aesni - Rearrange AES key size check
aes_expandkey() already includes an AES key size check. If AES-NI is
unusable, invoke the function without the size check.

Also, use aes_check_keylen() instead of open code.

Signed-off-by: Chang S. Bae <chang.seok.bae@intel.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: linux-crypto@vger.kernel.org
Cc: x86@kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:39 +08:00
Aleksandr Mishin
2b3460cbf4 crypto: bcm - Fix pointer arithmetic
In spu2_dump_omd() value of ptr is increased by ciph_key_len
instead of hash_iv_len which could lead to going beyond the
buffer boundaries.
Fix this bug by changing ciph_key_len to hash_iv_len.

Found by Linux Verification Center (linuxtesting.org) with SVACE.

Fixes: 9d12ba86f8 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Aleksandr Mishin <amishin@t-argos.ru>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:39 +08:00
Jerry Snitselaar
616ce45c15 crypto: iaa - Fix some errors in IAA documentation
This cleans up the following issues I ran into when trying to use the
scripts and commands in the iaa-crypto.rst document.

- Fix incorrect arguments being passed to accel-config
  config-wq.
    - Replace --device_name with --driver-name.
    - Replace --driver_name with --driver-name.
    - Replace --size with --wq-size.
    - Add missing --priority argument.
- Add missing accel-config config-engine command after the
  config-wq commands.
- Fix wq name passed to accel-config config-wq.
- Add rmmod/modprobe of iaa_crypto to script that disables,
  then enables all devices and workqueues to avoid enable-wq
  failing with -EEXIST when trying to register to compression
  algorithm.
- Fix device name in cases where iaa was used instead of iax.

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-crypto@vger.kernel.org
Cc: linux-doc@vger.kernel.org
Signed-off-by: Jerry Snitselaar <jsnitsel@redhat.com>
Reviewed-by: Tom Zanussi <tom.zanussi@linux.intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:39 +08:00
Stefan Berger
48e4fd6d54 crypto: ecdsa - Fix module auto-load on add-key
Add module alias with the algorithm cra_name similar to what we have for
RSA-related and other algorithms.

The kernel attempts to modprobe asymmetric algorithms using the names
"crypto-$cra_name" and "crypto-$cra_name-all." However, since these
aliases are currently missing, the modules are not loaded. For instance,
when using the `add_key` function, the hash algorithm is typically
loaded automatically, but the asymmetric algorithm is not.

Steps to test:

1. Create certificate

  openssl req -x509 -sha256 -newkey ec \
  -pkeyopt "ec_paramgen_curve:secp384r1" -keyout key.pem -days 365 \
  -subj '/CN=test' -nodes -outform der -out nist-p384.der

2. Optionally, trace module requests with: trace-cmd stream -e module &

3. Trigger add_key call for the cert:

   # keyctl padd asymmetric "" @u < nist-p384.der
   641069229
   # lsmod | head -2
   Module                  Size  Used by
   ecdsa_generic          16384  0

Fixes: c12d448ba9 ("crypto: ecdsa - Register NIST P384 and extend test suite")
Cc: stable@vger.kernel.org
Signed-off-by: Stefan Berger <stefanb@linux.ibm.com>
Reviewed-by: Vitaly Chikunov <vt@altlinux.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00
Joachim Vandersmissen
dbad7b6969 crypto: ecc - update ecc_gen_privkey for FIPS 186-5
FIPS 186-5 [1] was released approximately 1 year ago. The most
interesting change for ecc_gen_privkey is the removal of curves with
order < 224 bits. This is minimum is now checked in step 1. It is
unlikely that there is still any benefit in generating private keys for
curves with n < 224, as those curves provide less than 112 bits of
security strength and are therefore unsafe for any modern usage.

This patch also updates the documentation for __ecc_is_key_valid and
ecc_gen_privkey to clarify which FIPS 186-5 method is being used to
generate private keys. Previous documentation mentioned that "extra
random bits" was used. However, this did not match the code. Instead,
the code currently uses (and always has used) the "rejection sampling"
("testing candidates" in FIPS 186-4) method.

[1]: https://doi.org/10.6028/NIST.FIPS.186-5

Signed-off-by: Joachim Vandersmissen <git@jvdsn.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00
Vitaly Chikunov
eb5739a1ef crypto: ecrdsa - Fix module auto-load on add_key
Add module alias with the algorithm cra_name similar to what we have for
RSA-related and other algorithms.

The kernel attempts to modprobe asymmetric algorithms using the names
"crypto-$cra_name" and "crypto-$cra_name-all." However, since these
aliases are currently missing, the modules are not loaded. For instance,
when using the `add_key` function, the hash algorithm is typically
loaded automatically, but the asymmetric algorithm is not.

Steps to test:

1. Cert is generated usings ima-evm-utils test suite with
   `gen-keys.sh`, example cert is provided below:

  $ base64 -d >test-gost2012_512-A.cer <<EOF
  MIIB/DCCAWagAwIBAgIUK8+whWevr3FFkSdU9GLDAM7ure8wDAYIKoUDBwEBAwMFADARMQ8wDQYD
  VQQDDAZDQSBLZXkwIBcNMjIwMjAxMjIwOTQxWhgPMjA4MjEyMDUyMjA5NDFaMBExDzANBgNVBAMM
  BkNBIEtleTCBoDAXBggqhQMHAQEBAjALBgkqhQMHAQIBAgEDgYQABIGALXNrTJGgeErBUOov3Cfo
  IrHF9fcj8UjzwGeKCkbCcINzVUbdPmCopeJRHDJEvQBX1CQUPtlwDv6ANjTTRoq5nCk9L5PPFP1H
  z73JIXHT0eRBDVoWy0cWDRz1mmQlCnN2HThMtEloaQI81nTlKZOcEYDtDpi5WODmjEeRNQJMdqCj
  UDBOMAwGA1UdEwQFMAMBAf8wHQYDVR0OBBYEFCwfOITMbE9VisW1i2TYeu1tAo5QMB8GA1UdIwQY
  MBaAFCwfOITMbE9VisW1i2TYeu1tAo5QMAwGCCqFAwcBAQMDBQADgYEAmBfJCMTdC0/NSjz4BBiQ
  qDIEjomO7FEHYlkX5NGulcF8FaJW2jeyyXXtbpnub1IQ8af1KFIpwoS2e93LaaofxpWlpQLlju6m
  KYLOcO4xK3Whwa2hBAz9YbpUSFjvxnkS2/jpH2MsOSXuUEeCruG/RkHHB3ACef9umG6HCNQuAPY=
  EOF

2. Optionally, trace module requests with: trace-cmd stream -e module &

3. Trigger add_key call for the cert:

  # keyctl padd asymmetric "" @u <test-gost2012_512-A.cer
  939910969
  # lsmod | head -3
  Module                  Size  Used by
  ecrdsa_generic         16384  0
  streebog_generic       28672  0

Repored-by: Paul Wolneykien <manowar@altlinux.org>
Cc: stable@vger.kernel.org
Signed-off-by: Vitaly Chikunov <vt@altlinux.org>
Tested-by: Stefan Berger <stefanb@linux.ibm.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00
Li Zhijian
90d012fbbf hwrng: core - Convert sprintf/snprintf to sysfs_emit
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.

coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().

sprintf() will be converted as weel if they have.

Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci

No functional change intended

CC: Olivia Mackall <olivia@selenic.com>
CC: Herbert Xu <herbert@gondor.apana.org.au>
CC: linux-crypto@vger.kernel.org
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00
Luca Weiss
355577ef84 dt-bindings: crypto: ice: Document sc7280 inline crypto engine
Document the compatible used for the inline crypto engine found on
SC7280.

Signed-off-by: Luca Weiss <luca.weiss@fairphone.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00
Eric Biggers
29ce50e078 crypto: remove CONFIG_CRYPTO_STATS
Remove support for the "Crypto usage statistics" feature
(CONFIG_CRYPTO_STATS).  This feature does not appear to have ever been
used, and it is harmful because it significantly reduces performance and
is a large maintenance burden.

Covering each of these points in detail:

1. Feature is not being used

Since these generic crypto statistics are only readable using netlink,
it's fairly straightforward to look for programs that use them.  I'm
unable to find any evidence that any such programs exist.  For example,
Debian Code Search returns no hits except the kernel header and kernel
code itself and translations of the kernel header:
https://codesearch.debian.net/search?q=CRYPTOCFGA_STAT&literal=1&perpkg=1

The patch series that added this feature in 2018
(https://lore.kernel.org/linux-crypto/1537351855-16618-1-git-send-email-clabbe@baylibre.com/)
said "The goal is to have an ifconfig for crypto device."  This doesn't
appear to have happened.

It's not clear that there is real demand for crypto statistics.  Just
because the kernel provides other types of statistics such as I/O and
networking statistics and some people find those useful does not mean
that crypto statistics are useful too.

Further evidence that programs are not using CONFIG_CRYPTO_STATS is that
it was able to be disabled in RHEL and Fedora as a bug fix
(https://gitlab.com/redhat/centos-stream/src/kernel/centos-stream-9/-/merge_requests/2947).

Even further evidence comes from the fact that there are and have been
bugs in how the stats work, but they were never reported.  For example,
before Linux v6.7 hash stats were double-counted in most cases.

There has also never been any documentation for this feature, so it
might be hard to use even if someone wanted to.

2. CONFIG_CRYPTO_STATS significantly reduces performance

Enabling CONFIG_CRYPTO_STATS significantly reduces the performance of
the crypto API, even if no program ever retrieves the statistics.  This
primarily affects systems with a large number of CPUs.  For example,
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/2039576 reported
that Lustre client encryption performance improved from 21.7GB/s to
48.2GB/s by disabling CONFIG_CRYPTO_STATS.

It can be argued that this means that CONFIG_CRYPTO_STATS should be
optimized with per-cpu counters similar to many of the networking
counters.  But no one has done this in 5+ years.  This is consistent
with the fact that the feature appears to be unused, so there seems to
be little interest in improving it as opposed to just disabling it.

It can be argued that because CONFIG_CRYPTO_STATS is off by default,
performance doesn't matter.  But Linux distros tend to error on the side
of enabling options.  The option is enabled in Ubuntu and Arch Linux,
and until recently was enabled in RHEL and Fedora (see above).  So, even
just having the option available is harmful to users.

3. CONFIG_CRYPTO_STATS is a large maintenance burden

There are over 1000 lines of code associated with CONFIG_CRYPTO_STATS,
spread among 32 files.  It significantly complicates much of the
implementation of the crypto API.  After the initial submission, many
fixes and refactorings have consumed effort of multiple people to keep
this feature "working".  We should be spending this effort elsewhere.

Acked-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00
Gustavo A. R. Silva
1e6b251ce1 crypto: nx - Avoid -Wflex-array-member-not-at-end warning
-Wflex-array-member-not-at-end is coming in GCC-14, and we are getting
ready to enable it globally. So, we are deprecating flexible-array
members in the middle of another structure.

There is currently an object (`header`) in `struct nx842_crypto_ctx`
that contains a flexible structure (`struct nx842_crypto_header`):

struct nx842_crypto_ctx {
	...
        struct nx842_crypto_header header;
        struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
	...
};

So, in order to avoid ending up with a flexible-array member in the
middle of another struct, we use the `struct_group_tagged()` helper to
separate the flexible array from the rest of the members in the flexible
structure:

struct nx842_crypto_header {
	struct_group_tagged(nx842_crypto_header_hdr, hdr,

		... the rest of the members

	);
        struct nx842_crypto_header_group group[];
} __packed;

With the change described above, we can now declare an object of the
type of the tagged struct, without embedding the flexible array in the
middle of another struct:

struct nx842_crypto_ctx {
	...
        struct nx842_crypto_header_hdr header;
        struct nx842_crypto_header_group group[NX842_CRYPTO_GROUP_MAX];
	...
 } __packed;

We also use `container_of()` whenever we need to retrieve a pointer to
the flexible structure, through which we can access the flexible
array if needed.

So, with these changes, fix the following warning:

In file included from drivers/crypto/nx/nx-842.c:55:
drivers/crypto/nx/nx-842.h:174:36: warning: structure containing a flexible array member is not at the end of another structure [-Wflex-array-member-not-at-end]
  174 |         struct nx842_crypto_header header;
      |                                    ^~~~~~

Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00
Jia Jie Ho
7467147ef9 crypto: starfive - Use dma for aes requests
Convert AES module to use dma for data transfers to reduce cpu load and
compatible with future variants.

Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00
Jia Jie Ho
a05c821e42 crypto: starfive - Skip unneeded key free
Skip unneeded kfree_sensitive if RSA module is using falback algo.

Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00
Jia Jie Ho
b6e9eb69a1 crypto: starfive - Update hash dma usage
Current hash uses sw fallback for non-word aligned input scatterlists.
Add support for unaligned cases utilizing the data valid mask for dma.

Signed-off-by: Jia Jie Ho <jiajie.ho@starfivetech.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2024-04-02 10:49:38 +08:00