As of the first s390 pull request during the 6.9 merge window,
commit 691632f0e8 ("Merge tag 's390-6.9-1' of
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be
built with LLVM=1 when using LLVM 18.1.0, which is the first version
that has SystemZ support implemented in ld.lld and llvm-objcopy.
Update the supported architectures table in the Kbuild LLVM
documentation to note this explicitly to make it more discoverable by
users and other developers. Additionally, this brings s390 in line with
the rest of the architectures in the table, which all support LLVM=1.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When KCSAN and CONSTRUCTORS are enabled, one can trigger the
"Unpatched return thunk in use. This should not happen!"
catch-all warning.
Usually, when objtool runs on the .o objects, it does generate a section
.return_sites which contains all offsets in the objects to the return
thunks of the functions present there. Those return thunks then get
patched at runtime by the alternatives.
KCSAN and CONSTRUCTORS add this to the object file's .text.startup
section:
-------------------
Disassembly of section .text.startup:
...
0000000000000010 <_sub_I_00099_0>:
10: f3 0f 1e fa endbr64
14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9>
15: R_X86_64_PLT32 __tsan_init-0x4
19: e9 00 00 00 00 jmp 1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6>
1a: R_X86_64_PLT32 __x86_return_thunk-0x4
-------------------
which, if it is built as a module goes through the intermediary stage of
creating a <module>.mod.c file which, when translated, receives a second
constructor:
-------------------
Disassembly of section .text.startup:
0000000000000010 <_sub_I_00099_0>:
10: f3 0f 1e fa endbr64
14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9>
15: R_X86_64_PLT32 __tsan_init-0x4
19: e9 00 00 00 00 jmp 1e <_sub_I_00099_0+0xe>
1a: R_X86_64_PLT32 __x86_return_thunk-0x4
...
0000000000000030 <_sub_I_00099_0>:
30: f3 0f 1e fa endbr64
34: e8 00 00 00 00 call 39 <_sub_I_00099_0+0x9>
35: R_X86_64_PLT32 __tsan_init-0x4
39: e9 00 00 00 00 jmp 3e <__ksymtab_cryptd_alloc_ahash+0x2>
3a: R_X86_64_PLT32 __x86_return_thunk-0x4
-------------------
in the .ko file.
Objtool has run already so that second constructor's return thunk cannot
be added to the .return_sites section and thus the return thunk remains
unpatched and the warning rightfully fires.
Drop KCSAN flags from the mod.c generation stage as those constructors
do not contain data races one would be interested about.
Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay
Borisov <nik.borisov@suse.com>.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.de
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
All PLL id values of CMU_TOP were incorrectly set to FOUT_SHARED0_PLL.
It modified to the correct PLL clock id value.
Fixes: 6587c62f69 ("clk: samsung: add top clock support for Exynos Auto v9 SoC")
Signed-off-by: Jaewon Kim <jaewon02.kim@samsung.com>
Reviewed-by: Sam Protsenko <semen.protsenko@linaro.org>
Link: https://lore.kernel.org/r/20240328091000.17660-1-jaewon02.kim@samsung.com
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When compiling the v6.9-rc1 kernel with the x32 compiler, the following
errors are reported. The reason is that we take an "unsigned long"
variable and print it using "PRIx64" format string.
In file included from check.c:16:
check.c: In function ‘add_dead_ends’:
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
46 | "%s: warning: objtool: " format "\n", \
| ^~~~~~~~~~~~~~~~~~~~~~~~
check.c:613:33: note: in expansion of macro ‘WARN’
613 | WARN("can't find unreachable insn at %s+0x%" PRIx64,
| ^~~~
...
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org
* Allow stripe unit/width value passed via mount option to be written over
existing values in the super block.
* Do not set current->journal_info to avoid its value from being miused by
another filesystem context.
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQjMC4mbgVeU7MxEIYH7y4RirJu9AUCZgKa+AAKCRAH7y4RirJu
9IL1APwPBMzSowijBI/rCD5BGlISn7mCRlZwvyXE1avmRmbQPAEApU5yRhBHWi62
629azfSr1I5m678xM7WQKh6X3/VUDAg=
=pqNH
-----END PGP SIGNATURE-----
Merge tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux
Pull xfs fixes from Chandan Babu:
- Allow stripe unit/width value passed via mount option to be written
over existing values in the super block
- Do not set current->journal_info to avoid its value from being miused
by another filesystem context
* tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't use current->journal_info
xfs: allow sunit mount option to repair bad primary sb stripe values
Fully half this pull is updates to lpfc and qla2xxx which got
committed just as the merge window opened. A sizeable fraction of the
driver updates are simple bug fixes (and lock reworks for bug fixes in
the case of lpfc), so rather than splitting the few actual
enhancements out, we're just adding the drivers to the -rc1 pull. The
enhancements for lpfc are log message removals, copyright updates and
three patches redefining types. For qla2xxx it's just removing a
debug message on module removal and the manufacturer detail update.
The two major fixes are the sg teardown race and a core error leg
problem with the procfs directory not being removed if we destroy a
created host that never got to the running state. The rest are minor
fixes and constifications.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCZghLoiYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pisheICAQDVOLQd
GHg/lRzbbBbeqU8aDiZCSfbPlRUla1IutNlZCQD7BmlP8bMQuHcY4auHMttCeLYd
s+EDe2cpznokwuNP0d4=
=NtRd
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes and updates from James Bottomley:
"Fully half this pull is updates to lpfc and qla2xxx which got
committed just as the merge window opened. A sizeable fraction of the
driver updates are simple bug fixes (and lock reworks for bug fixes in
the case of lpfc), so rather than splitting the few actual
enhancements out, we're just adding the drivers to the -rc1 pull.
The enhancements for lpfc are log message removals, copyright updates
and three patches redefining types. For qla2xxx it's just removing a
debug message on module removal and the manufacturer detail update.
The two major fixes are the sg teardown race and a core error leg
problem with the procfs directory not being removed if we destroy a
created host that never got to the running state. The rest are minor
fixes and constifications"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
scsi: core: Fix unremoved procfs host directory regression
scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
scsi: sd: Fix TCG OPAL unlock on system resume
scsi: sg: Avoid sg device teardown race
scsi: lpfc: Copyright updates for 14.4.0.1 patches
scsi: lpfc: Update lpfc version to 14.4.0.1
scsi: lpfc: Define types in a union for generic void *context3 ptr
scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
scsi: lpfc: Use a dedicated lock for ras_fwlog state
scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
scsi: lpfc: Remove unnecessary log message in queuecommand path
scsi: qla2xxx: Update version to 10.02.09.200-k
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Change debug message during driver unload
...
-----BEGIN PGP SIGNATURE-----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=Vp8P
-----END PGP SIGNATURE-----
Merge tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"A fix from Andi for I2C host drivers"
* tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1
Here are a bunch of small USB fixes for reported problems and
regressions for 6.9-rc2. Included in here are:
- deadlock fixes for long-suffering issues
- USB phy driver revert for reported problem
- typec fixes for reported problems
- duplicate id in dwc3 dropped
- dwc2 driver fixes
- udc driver warning fix
- cdc-wdm race bugfix
- other tiny USB bugfixes
All of these have been in linux-next this past week with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZggDDg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymuXQCg0/LF/RSoCer/7dczP7zglY+Mw+sAni6ft9jx
gzxF9jiqPAjjePT7YFgE
=AB/K
-----END PGP SIGNATURE-----
Merge tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a bunch of small USB fixes for reported problems and
regressions for 6.9-rc2. Included in here are:
- deadlock fixes for long-suffering issues
- USB phy driver revert for reported problem
- typec fixes for reported problems
- duplicate id in dwc3 dropped
- dwc2 driver fixes
- udc driver warning fix
- cdc-wdm race bugfix
- other tiny USB bugfixes
All of these have been in linux-next this past week with no reported
issues"
* tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: core: Fix deadlock in port "disable" sysfs attribute
USB: core: Add hub_get() and hub_put() routines
usb: typec: ucsi: Check capabilities before cable and identity discovery
usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
usb: typec: ucsi_acpi: Refactor and fix DELL quirk
usb: typec: ucsi: Ack unsupported commands
usb: typec: ucsi: Check for notifications after init
usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
usb: typec: Return size of buffer if pd_set operation succeeds
usb: udc: remove warning when queue disabled ep
usb: dwc3: pci: Drop duplicate ID
usb: dwc3: Properly set system wakeup
Revert "usb: phy: generic: Get the vbus supply"
usb: cdc-wdm: close race between read and workqueue
usb: dwc2: gadget: LPM flow fix
usb: dwc2: gadget: Fix exiting from clock gating
usb: dwc2: host: Fix ISOC flow in DDMA mode
usb: dwc2: host: Fix remote wakeup from hibernation
usb: dwc2: host: Fix hibernation flow
USB: core: Fix deadlock in usb_deauthorize_interface()
...
Here are two small staging driver fixes for the vc04_services driver
that resolve reported problems:
- strncpy fix for information leak
- another information leak discovered by the previous strncpy fix
Both of these have been in linux-next all this past week with no
reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCZggDpw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynyVACeP70TljJdaUAsUgTvRDFjf7unXtoAoJl2Awz0
oXqFuGqwt+WJeXqjwamx
=60tL
-----END PGP SIGNATURE-----
Merge tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for the vc04_services driver
that resolve reported problems:
- strncpy fix for information leak
- another information leak discovered by the previous strncpy fix
Both of these have been in linux-next all this past week with no
reported issues"
* tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vc04_services: fix information leak in create_component()
staging: vc04_services: changen strncpy() to strscpy_pad()
This modifies the ad7944 driver to use spi_optimize_message() to reduce
CPU usage and increase the max sample rate by avoiding repeating
validation of the spi message on each transfer.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240328-ad7944-spi-optimize-message-v2-1-a142b2576379@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
SoM dts has enabled i2c bus IIC6 (dts i2c5), but defines no aliases.
LX2162A Clearfog dts has aliases for all i2c buses to ensure predictable
numbering for userspace. Add an additional alias for this extra bus.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
SolidRun LX2162A SoM has an RTC on bus IIC6 (dts i2c5).
Enable this bus and add description for the rtc.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
malfunctions on some Lenovo P1 models by incorrectly overwriting
a status variable during successful SMBUS transactions.
-----BEGIN PGP SIGNATURE-----
iIwEABYIADQWIQScDfrjQa34uOld1VLaeAVmJtMtbgUCZgXR5RYcYW5kaS5zaHl0
aUBrZXJuZWwub3JnAAoJENp4BWYm0y1uqAQBAJqp/3aqB816lBH0F2i2qTs/sXL4
lmeDWXG3XXkdOC+WAQCcxJ/EoJcNH6kDfMm0XvgyixTDVy68Mk7HMsQOg1ntBQ==
=vXmL
-----END PGP SIGNATURE-----
Merge tag 'i2c-host-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current
One fix in the i801 driver where a bug caused touchpad
malfunctions on some Lenovo P1 models by incorrectly overwriting
a status variable during successful SMBUS transactions.
Fix the following warning from a 'make dtbs W=1':
arch/arm64/boot/dts/freescale/imx8mp-venice-gw74xx-imx219.dtso:65.10-70.5:
Warning (unit_address_vs_reg): /fragment@3/__overlay__/ports/port@0:
node has a unit name, but no reg or ranges property
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
- Only capitalize entries where that makes sense
- Print separate values separately
- Rename 'PROCESSOR' to vendor & CPUID
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Avadhut Naik <avadhut.naik@amd.com>
Cc: "Tony Luck" <tony.luck@intel.com>
Link: https://lore.kernel.org/r/ZgZpn/zbCJWYdL5y@gmail.com
Commit c33621b4c5 ("x86/virt/tdx: Wire up basic SEAMCALL functions")
introduced a new instance of core-y instead of the standardized obj-y
syntax.
X86 Makefiles descend into subdirectories of arch/x86/virt inconsistently;
into arch/x86/virt/ via core-y defined in arch/x86/Makefile, but into
arch/x86/virt/svm/ via obj-y defined in arch/x86/Kbuild.
This is problematic when you build a single object in parallel because
multiple threads attempt to build the same file.
$ make -j$(nproc) arch/x86/virt/vmx/tdx/seamcall.o
[ snip ]
AS arch/x86/virt/vmx/tdx/seamcall.o
AS arch/x86/virt/vmx/tdx/seamcall.o
fixdep: error opening file: arch/x86/virt/vmx/tdx/.seamcall.o.d: No such file or directory
make[4]: *** [scripts/Makefile.build:362: arch/x86/virt/vmx/tdx/seamcall.o] Error 2
Use the obj-y syntax, as it works correctly.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20240330060554.18524-1-masahiroy@kernel.org
These ASUS laptops use the Realtek HDA codec combined with a number of
CS35L56 amplifiers.
The SSID of the GA403U matches a previous ASUS laptop - we can tell them
apart because they use different codecs.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Message-ID: <20240329112803.23897-1-simont@opensource.cirrus.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When BPF selftests are built in RELEASE=1 mode with -O2 optimization
level, uprobe_multi binary, called from multi-uprobe tests is optimized
to the point that all the thousands of target uprobe_multi_func_XXX
functions are eliminated, breaking tests.
So ensure they are preserved by using weak attribute.
But, actually, compiling uprobe_multi binary with -O2 takes a really
long time, and is quite useless (it's not a benchmark). So in addition
to ensuring that uprobe_multi_func_XXX functions are preserved, opt-out
of -O2 explicitly in Makefile and stick to -O0. This saves a lot of
compilation time.
With -O2, just recompiling uprobe_multi:
$ touch uprobe_multi.c
$ time make RELEASE=1 -j90
make RELEASE=1 -j90 291.66s user 2.54s system 99% cpu 4:55.52 total
With -O0:
$ touch uprobe_multi.c
$ time make RELEASE=1 -j90
make RELEASE=1 -j90 22.40s user 1.91s system 99% cpu 24.355 total
5 minutes vs (still slow, but...) 24 seconds.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20240329190410.4191353-1-andrii@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Enable only one CCS engine by default with all the compute sices
allocated to it.
While generating the list of UABI engines to be exposed to the
user, exclude any additional CCS engines beyond the first
instance.
This change can be tested with igt i915_query.
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-4-andi.shyti@linux.intel.com
We want a fixed load CCS balancing consisting in all slices
sharing one single user engine. For this reason do not create the
intel_engine_cs structure with its dedicated command streamer for
CCS slices beyond the first.
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-3-andi.shyti@linux.intel.com
The hardware should not dynamically balance the load between CCS
engines. Wa_14019159160 recommends disabling it across all
platforms.
Fixes: d2eae8e98d ("drm/i915/dg2: Drop force_probe requirement")
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: <stable@vger.kernel.org> # v6.2+
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Acked-by: Michal Mrozek <michal.mrozek@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240328073409.674098-2-andi.shyti@linux.intel.com
In f2fs_remount, SB_INLINECRYPT flag will be clear and re-set.
If create new file or open file during this gap, these files
will not use inlinecrypt. Worse case, it may lead to data
corruption if wrappedkey_v0 is enable.
Thread A: Thread B:
-f2fs_remount -f2fs_file_open or f2fs_new_inode
-default_options
<- clear SB_INLINECRYPT flag
-fscrypt_select_encryption_impl
-parse_options
<- set SB_INLINECRYPT again
Signed-off-by: Yunlei He <heyunlei@oppo.com>
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As reported by Yi Zhang in mailing list [1], kernel warning was catched
during zbd/010 test as below:
./check zbd/010
zbd/010 (test gap zone support with F2FS) [failed]
runtime ... 3.752s
something found in dmesg:
[ 4378.146781] run blktests zbd/010 at 2024-02-18 11:31:13
[ 4378.192349] null_blk: module loaded
[ 4378.209860] null_blk: disk nullb0 created
[ 4378.413285] scsi_debug:sdebug_driver_probe: scsi_debug: trim
poll_queues to 0. poll_q/nr_hw = (0/1)
[ 4378.422334] scsi host15: scsi_debug: version 0191 [20210520]
dev_size_mb=1024, opts=0x0, submit_queues=1, statistics=0
[ 4378.434922] scsi 15:0:0:0: Direct-Access-ZBC Linux
scsi_debug 0191 PQ: 0 ANSI: 7
[ 4378.443343] scsi 15:0:0:0: Power-on or device reset occurred
[ 4378.449371] sd 15:0:0:0: Attached scsi generic sg5 type 20
[ 4378.449418] sd 15:0:0:0: [sdf] Host-managed zoned block device
...
(See '/mnt/tests/gitlab.com/api/v4/projects/19168116/repository/archive.zip/storage/blktests/blk/blktests/results/nodev/zbd/010.dmesg'
WARNING: CPU: 22 PID: 44011 at fs/iomap/iter.c:51
CPU: 22 PID: 44011 Comm: fio Not tainted 6.8.0-rc3+ #1
RIP: 0010:iomap_iter+0x32b/0x350
Call Trace:
<TASK>
__iomap_dio_rw+0x1df/0x830
f2fs_file_read_iter+0x156/0x3d0 [f2fs]
aio_read+0x138/0x210
io_submit_one+0x188/0x8c0
__x64_sys_io_submit+0x8c/0x1a0
do_syscall_64+0x86/0x170
entry_SYSCALL_64_after_hwframe+0x6e/0x76
Shinichiro Kawasaki helps to analyse this issue and proposes a potential
fixing patch in [2].
Quoted from reply of Shinichiro Kawasaki:
"I confirmed that the trigger commit is dbf8e63f48 as Yi reported. I took a
look in the commit, but it looks fine to me. So I thought the cause is not
in the commit diff.
I found the WARN is printed when the f2fs is set up with multiple devices,
and read requests are mapped to the very first block of the second device in the
direct read path. In this case, f2fs_map_blocks() and f2fs_map_blocks_cached()
modify map->m_pblk as the physical block address from each block device. It
becomes zero when it is mapped to the first block of the device. However,
f2fs_iomap_begin() assumes that map->m_pblk is the physical block address of the
whole f2fs, across the all block devices. It compares map->m_pblk against
NULL_ADDR == 0, then go into the unexpected branch and sets the invalid
iomap->length. The WARN catches the invalid iomap->length.
This WARN is printed even for non-zoned block devices, by following steps.
- Create two (non-zoned) null_blk devices memory backed with 128MB size each:
nullb0 and nullb1.
# mkfs.f2fs /dev/nullb0 -c /dev/nullb1
# mount -t f2fs /dev/nullb0 "${mount_dir}"
# dd if=/dev/zero of="${mount_dir}/test.dat" bs=1M count=192
# dd if="${mount_dir}/test.dat" of=/dev/null bs=1M count=192 iflag=direct
..."
So, the root cause of this issue is: when multi-devices feature is on,
f2fs_map_blocks() may return zero blkaddr in non-primary device, which is
a verified valid block address, however, f2fs_iomap_begin() treats it as
an invalid block address, and then it triggers the warning in iomap
framework code.
Finally, as discussed, we decide to use a more simple and direct way that
checking (map.m_flags & F2FS_MAP_MAPPED) condition instead of
(map.m_pblk != NULL_ADDR) to fix this issue.
Thanks a lot for the effort of Yi Zhang and Shinichiro Kawasaki on this
issue.
[1] https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/
[2] https://lore.kernel.org/linux-f2fs-devel/gngdj77k4picagsfdtiaa7gpgnup6fsgwzsltx6milmhegmjff@iax2n4wvrqye/
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Closes: https://lore.kernel.org/linux-f2fs-devel/CAHj4cs-kfojYC9i0G73PRkYzcxCTex=-vugRFeP40g_URGvnfQ@mail.gmail.com/
Tested-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Fixes: 1517c1a7a4 ("f2fs: implement iomap operations")
Fixes: 8d3c1fa3fa ("f2fs: don't rely on F2FS_MAP_* in f2fs_iomap_begin")
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Christophe Roullier says:
====================
Add property in dwmac-stm32 documentation
Introduce property in dwmac-stm32 documentation
- st,ext-phyclk: is present since 2020 in driver so need to explain
it and avoid dtbs check issue : views/kernel/upstream/net-next/arch/arm/boot/dts/st/stm32mp157c-dk2.dtb:
ethernet@5800a000: Unevaluated properties are not allowed
('st,ext-phyclk' was unexpected)
Furthermore this property will be use in upstream of MP13 dwmac glue. (next step)
====================
Link: https://lore.kernel.org/r/20240328185337.332703-1-christophe.roullier@foss.st.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The Linux kernel dwmac-stm32 driver currently supports three DT
properties used to configure whether PHY clock are generated by
the MAC or supplied to the MAC from the PHY.
Originally there were two properties, st,eth-clk-sel and
st,eth-ref-clk-sel, each used to configure MAC clocking in
different bus mode and for different MAC clock frequency.
Since it is possible to determine the MAC 'eth-ck' clock
frequency from the clock subsystem and PHY bus mode from
the 'phy-mode' property, two disparate DT properties are
no longer required to configure MAC clocking.
Linux kernel commit 1bb694e208 ("net: ethernet: stmmac: simplify phy modes management for stm32")
introduced a third, unified, property st,ext-phyclk. This property
covers both use cases of st,eth-clk-sel and st,eth-ref-clk-sel DT
properties, as well as a new use case for 25 MHz clock generated
by the MAC.
The third property st,ext-phyclk is so far undocumented,
document it.
Below table summarizes the clock requirement and clock sources for
supported PHY interface modes.
__________________________________________________________________________
|PHY_MODE | Normal | PHY wo crystal| PHY wo crystal |No 125Mhz from PHY|
| | | 25MHz | 50MHz | |
---------------------------------------------------------------------------
| MII | - | eth-ck | n/a | n/a |
| | | st,ext-phyclk | | |
---------------------------------------------------------------------------
| GMII | - | eth-ck | n/a | n/a |
| | | st,ext-phyclk | | |
---------------------------------------------------------------------------
| RGMII | - | eth-ck | n/a | eth-ck |
| | | st,ext-phyclk | | st,eth-clk-sel or|
| | | | | st,ext-phyclk |
---------------------------------------------------------------------------
| RMII | - | eth-ck | eth-ck | n/a |
| | | st,ext-phyclk | st,eth-ref-clk-sel | |
| | | | or st,ext-phyclk | |
---------------------------------------------------------------------------
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Christophe Roullier <christophe.roullier@foss.st.com>
Link: https://lore.kernel.org/r/20240328185337.332703-2-christophe.roullier@foss.st.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This kselftest fixes update for Linux 6.9-rc2 consists of fixes
to seccomp and ftrace tests and a change to add config file for
dmabuf-heap test to increase coverage.
-----BEGIN PGP SIGNATURE-----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=qPtu
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull kselftest fixes from Shuah Khan:
"Fixes to seccomp and ftrace tests and a change to add config file for
dmabuf-heap test to increase coverage"
* tag 'linux_kselftest-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests: dmabuf-heap: add config file for the test
selftests/seccomp: Try to fit runtime of benchmark into timeout
selftests/ftrace: Fix event filter target_func selection
This kunit update for Linux 6.9-rc2 consists of one urgent fix for
--alltests build failure related to renaming of CONFIG_DAMON_DBGFS
to DAMON_DBGFS_DEPRECATED to the missing config option.
-----BEGIN PGP SIGNATURE-----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=GX2q
-----END PGP SIGNATURE-----
Merge tag 'linux_kselftest-kunit-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull KUnit fixes from Shuah Khan:
"One urgent fix for --alltests build failure related to renaming of
CONFIG_DAMON_DBGFS to DAMON_DBGFS_DEPRECATED to the missing config
option"
* tag 'linux_kselftest-kunit-fixes-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
kunit: configs: Enable CONFIG_DAMON_DBGFS_DEPRECATED for --alltests
- Bluetooth: Fix TOCTOU in HCI debugfs implementation
- Bluetooth: hci_event: set the conn encrypted before conn establishes
- Bluetooth: qca: fix device-address endianness
- Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync
-----BEGIN PGP SIGNATURE-----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=tCQe
-----END PGP SIGNATURE-----
Merge tag 'for-net-2024-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- Bluetooth: Fix TOCTOU in HCI debugfs implementation
- Bluetooth: hci_event: set the conn encrypted before conn establishes
- Bluetooth: qca: fix device-address endianness
- Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync
* tag 'for-net-2024-03-29' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: Fix TOCTOU in HCI debugfs implementation
Bluetooth: hci_event: set the conn encrypted before conn establishes
Bluetooth: hci_sync: Fix not checking error on hci_cmd_sync_cancel_sync
Bluetooth: qca: fix device-address endianness
Bluetooth: add quirk for broken address properties
arm64: dts: qcom: sc7180-trogdor: mark bluetooth address as broken
dt-bindings: bluetooth: add 'qcom,local-bd-address-broken'
Revert "Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT"
====================
Link: https://lore.kernel.org/r/20240329140453.2016486-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
tcp: Fix bind() regression and more tests.
bhash2 has not been well tested for IPV6_V6ONLY option.
This series fixes two regression around IPV6_V6ONLY, one of which
has been there since bhash2 introduction, and another is introduced
by a recent change.
Also, this series adds as many tests as possible to catch regression
easily. The baseline is 28044fc1d4~ which is pre-bhash2 commit.
Tested on 28044fc1d4~:
# PASSED: 132 / 132 tests passed.
# Totals: pass:132 fail:0 xfail:0 xpass:0 skip:0 error:0
net.git:
# FAILED: 125 / 132 tests passed.
# Totals: pass:125 fail:7 xfail:0 xpass:0 skip:0 error:0
With this series:
# PASSED: 132 / 132 tests passed.
# Totals: pass:132 fail:0 xfail:0 xpass:0 skip:0 error:0
v1: https://lore.kernel.org/netdev/20240325181923.48769-1-kuniyu@amazon.com/
====================
Link: https://lore.kernel.org/r/20240326204251.51301-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are, especially with multi-attr arrays, many cases
of needing to iterate all attributes of a specific type
in a netlink message or a nested attribute. Add specific
macros to support that case.
Also convert many instances using this spatch:
@@
iterator nla_for_each_attr;
iterator name nla_for_each_attr_type;
identifier nla;
expression head, len, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_attr(nla, head, len, rem)
+nla_for_each_attr_type(nla, ATTR, head, len, rem)
{
<... T x; ...>
-if (nla_type(nla) == ATTR) {
...
-}
}
@@
identifier nla;
iterator nla_for_each_nested;
iterator name nla_for_each_nested_type;
expression attr, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_nested(nla, attr, rem)
+nla_for_each_nested_type(nla, ATTR, attr, rem)
{
<... T x; ...>
-if (nla_type(nla) == ATTR) {
...
-}
}
@@
iterator nla_for_each_attr;
iterator name nla_for_each_attr_type;
identifier nla;
expression head, len, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_attr(nla, head, len, rem)
+nla_for_each_attr_type(nla, ATTR, head, len, rem)
{
<... T x; ...>
-if (nla_type(nla) != ATTR) continue;
...
}
@@
identifier nla;
iterator nla_for_each_nested;
iterator name nla_for_each_nested_type;
expression attr, rem;
expression ATTR;
type T;
identifier x;
@@
-nla_for_each_nested(nla, attr, rem)
+nla_for_each_nested_type(nla, ATTR, attr, rem)
{
<... T x; ...>
-if (nla_type(nla) != ATTR) continue;
...
}
Although I had to undo one bad change this made, and
I also adjusted some other code for whitespace and to
use direct variable initialization now.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Link: https://lore.kernel.org/r/20240328203144.b5a6c895fb80.I1869b44767379f204998ff44dd239803f39c23e0@changeid
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
udp: small changes on receive path
This series is based on an observation I made in UDP receive path.
The sock_def_readable() costs are pretty high, especially when
epoll is used to generate EPOLLIN events.
First patch annotates races on sk->sk_rcvbuf reads.
Second patch replaces an atomic_add_return()
with a less expensive atomic_add()
Third patch avoids calling sock_def_readable() when possible.
Fourth patch adds sk_wake_async_rcu() to get better inlining
and code generation.
====================
Link: https://lore.kernel.org/r/20240328144032.1864988-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
While looking at UDP receive performance, I saw sk_wake_async()
was no longer inlined.
This matters at least on AMD Zen1-4 platforms (see SRSO)
This might be because rcu_read_lock() and rcu_read_unlock()
are no longer nops in recent kernels ?
Add sk_wake_async_rcu() variant, which must be called from
contexts already holding rcu lock.
As SOCK_FASYNC is deprecated in modern days, use unlikely()
to give a hint to the compiler.
sk_wake_async_rcu() is properly inlined from
__udp_enqueue_schedule_skb() and sock_def_readable().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240328144032.1864988-5-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sock_def_readable() is quite expensive (particularly
when ep_poll_callback() is in the picture).
We must call sk->sk_data_ready() when :
- receive queue was empty, or
- SO_PEEK_OFF is enabled on the socket, or
- sk->sk_data_ready is not sock_def_readable.
We still need to call sk_wake_async().
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Link: https://lore.kernel.org/r/20240328144032.1864988-4-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sk->sk_rcvbuf is read locklessly twice, while other threads
could change its value.
Use a READ_ONCE() to annotate the race.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240328144032.1864988-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This patch adds two tests using SO_REUSEADDR and SO_REUSEPORT and
defines errno for each test case.
SO_REUSEADDR/SO_REUSEPORT is set for the per-fixture two bind()
calls.
The notable pattern is the pair of v6only [::] and plain [::].
The two sockets are put into the same tb2, where per-bucket v6only
flag would be useless to detect bind() conflict.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240326204251.51301-9-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bhash2 was not well tested for IPv6-only sockets.
This patch adds test cases where we set IPV6_V6ONLY for per-fixture
bind() calls if variant->ipv6_only[i] is true.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240326204251.51301-8-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In addtition to the two addresses defined in the fixtures, this patch
add 6 more bind calls():
* 0.0.0.0
* 127.0.0.1
* ::
* ::1
* ::ffff:0.0.0.0
* ::ffff:127.0.0.1
The first two per-fixture bind() calls control how inet_bind2_bucket
is created, and the rest 6 bind() calls cover as many conflicting
patterns as possible.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240326204251.51301-7-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We don't have bind() conflict tests for the same protocol pairs.
Let's add them except for the same address pair, which will be
covered by the following patch adding 6 more bind() calls for
each test case.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240326204251.51301-6-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, bind_wildcard.c calls bind() twice for two addresses and
checks the pre-defined errno against the 2nd call. Also, the two
bind() calls are swapped to cover various patterns how bind buckets
are created.
However, only testing two addresses is insufficient to detect regression.
So, we will add more bind() calls, and then, we need to define different
errno for each bind() per test case.
As a prepartion, let's define the reverse order bind() test cases as
fixtures.
No functional changes are intended.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240326204251.51301-5-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Currently, bind_wildcard.c tests only (IPv4, IPv6) pairs, but we will
add more tests for the same protocol pairs.
This patch makes it possible by changing the address pointer to void.
No functional changes are intended.
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240326204251.51301-4-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jianguo Wu reported another bind() regression introduced by bhash2.
Calling bind() for the following 3 addresses on the same port, the
3rd one should fail but now succeeds.
1. 0.0.0.0 or ::ffff:0.0.0.0
2. [::] w/ IPV6_V6ONLY
3. IPv4 non-wildcard address or v4-mapped-v6 non-wildcard address
The first two bind() create tb2 like this:
bhash2 -> tb2(:: w/ IPV6_V6ONLY) -> tb2(0.0.0.0)
The 3rd bind() will match with the IPv6 only wildcard address bucket
in inet_bind2_bucket_match_addr_any(), however, no conflicting socket
exists in the bucket. So, inet_bhash2_conflict() will returns false,
and thus, inet_bhash2_addr_any_conflict() returns false consequently.
As a result, the 3rd bind() bypasses conflict check, which should be
done against the IPv4 wildcard address bucket.
So, in inet_bhash2_addr_any_conflict(), we must iterate over all buckets.
Note that we cannot add ipv6_only flag for inet_bind2_bucket as it
would confuse the following patetrn.
1. [::] w/ SO_REUSE{ADDR,PORT} and IPV6_V6ONLY
2. [::] w/ SO_REUSE{ADDR,PORT}
3. IPv4 non-wildcard address or v4-mapped-v6 non-wildcard address
The first bind() would create a bucket with ipv6_only flag true,
the second bind() would add the [::] socket into the same bucket,
and the third bind() could succeed based on the wrong assumption
that ipv6_only bucket would not conflict with v4(-mapped-v6) address.
Fixes: 28044fc1d4 ("net: Add a bhash2 table hashed by port and address")
Diagnosed-by: Jianguo Wu <wujianguo106@163.com>
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240326204251.51301-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Commit 5e07e67241 ("tcp: Use bhash2 for v4-mapped-v6 non-wildcard
address.") introduced bind() regression for v4-mapped-v6 address.
When we bind() the following two addresses on the same port, the 2nd
bind() should succeed but fails now.
1. [::] w/ IPV6_ONLY
2. ::ffff:127.0.0.1
After the chagne, v4-mapped-v6 uses bhash2 instead of bhash to
detect conflict faster, but I forgot to add a necessary change.
During the 2nd bind(), inet_bind2_bucket_match_addr_any() returns
the tb2 bucket of [::], and inet_bhash2_conflict() finally calls
inet_bind_conflict(), which returns true, meaning conflict.
inet_bhash2_addr_any_conflict
|- inet_bind2_bucket_match_addr_any <-- return [::] bucket
`- inet_bhash2_conflict
`- __inet_bhash2_conflict <-- checks IPV6_ONLY for AF_INET
| but not for v4-mapped-v6 address
`- inet_bind_conflict <-- does not check address
inet_bind_conflict() does not check socket addresses because
__inet_bhash2_conflict() is expected to do so.
However, it checks IPV6_V6ONLY attribute only against AF_INET
socket, and not for v4-mapped-v6 address.
As a result, v4-mapped-v6 address conflicts with v6-only wildcard
address.
To avoid that, let's add the missing test to use bhash2 for
v4-mapped-v6 address.
Fixes: 5e07e67241 ("tcp: Use bhash2 for v4-mapped-v6 non-wildcard address.")
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://lore.kernel.org/r/20240326204251.51301-2-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The first part of the compatible of Type-C node misses ending quote,
thus we have one long compatible consisting of two compatible strings
leading to dtbs_check warnings:
sc7180-idp.dtb: usb-vbus-regulator@1100: compatible:0: 'qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg' does not match '^[a-zA-Z0-9][a-zA-Z0-9,+\\-._/]+$'
sc7180-idp.dtb: /soc@0/spmi@c440000/pmic@0/usb-vbus-regulator@1100: failed to match any schema with compatible: ['qcom,pm6150-vbus-reg,\n qcom,pm8150b-vbus-reg']
Reported-by: Rob Herring <robh@kernel.org>
Fixes: f81c2f01ca ("arm64: dts: qcom: pm6150: define USB-C related blocks")
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20240328074544.5076-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
At current x1e80100 interface table, interface #3 is wrongly
connected to DP controller #0 and interface #4 wrongly connected
to DP controller #2. Fix this problem by connect Interface #3 to
DP controller #0 and interface #4 connect to DP controller #1.
Also add interface #6, #7 and #8 connections to DP controller to
complete x1e80100 interface table.
Changs in V3:
-- add v2 changes log
Changs in V2:
-- add x1e80100 to subject
-- add Fixes
Fixes: e3b1f369db ("drm/msm/dpu: Add X1E80100 support")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Abel Vesa <abel.vesa@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/585549/
Link: https://lore.kernel.org/r/1711741586-9037-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>