Commit graph

1,308,922 commits

Author SHA1 Message Date
Nuno Sa
714b5b4c2c iio: buffer: iio: core: move to the cleanup.h magic
Use the new cleanup magic for handling mutexes in IIO. This allows us to
greatly simplify some code paths.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240229-iio-use-cleanup-magic-v3-3-c3d34889ae3c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:14 +00:00
Nuno Sa
095be2d530 iio: trigger: move to the cleanup.h magic
Use the new cleanup magic for handling mutexes in IIO. This allows us to
greatly simplify some code paths.

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240229-iio-use-cleanup-magic-v3-2-c3d34889ae3c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:14 +00:00
Nuno Sa
42ea599253 iio: core: move to cleanup.h magic
Use the new cleanup magic for handling mutexes in IIO. This allows us to
greatly simplify some code paths.

Note that we keep the plain mutex calls in the
iio_device_release|acquire() APIs since in there the macros would likely
not help much (as we want to keep the lock acquired when he leave the
APIs).

Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240229-iio-use-cleanup-magic-v3-1-c3d34889ae3c@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:14 +00:00
Jean-Baptiste Maneyrol
305914d018 iio: imu: inv_mpu6050: add WoM suspend wakeup with low-power mode
Add wakeup from suspend for WoM when enabled and put accel in low-power
mode when suspended. Requires rewriting pwr_mgmt_1 register handling and
factorize out accel LPF settings. Use a low-power rate similar to the chip
sampling rate but always lower for a best match of the sampling rate while
saving power and adjust threshold to follow the required roc value.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240311160557.437337-5-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
Jean-Baptiste Maneyrol
5537f653d9 iio: imu: inv_mpu6050: add new interrupt handler for WoM events
Add new interrupt handler for generating WoM event from int status register
bits. Launch from interrupt the trigger poll function for data buffer.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240311160557.437337-4-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
Jean-Baptiste Maneyrol
d0e79bebce iio: imu: inv_mpu6050: add WoM event as accel event
Add WoM (roc rising) event as accel x_or_y_or_z event for all chips >=
MPU-6500. This requires to create new MPU-6500 channels as default and
MPU-6050 channels for older chips.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240311160557.437337-3-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
Jean-Baptiste Maneyrol
0b70c08449 iio: imu: inv_mpu6050: add WoM (Wake-on-Motion) sensor
WoM is a threshold test on accel value comparing actual sample with
previous one. It maps best to roc rising event.

Add support of a new WOM sensor and functions for handling the associated
roc_rising event. The event value is in SI units. Ensure WOM is stopped and
restarted at suspend-resume, handle usage with buffer data ready interrupt,
and handle change in sampling rate impacting already set roc value.

Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Link: https://lore.kernel.org/r/20240311160557.437337-2-inv.git-commit@tdk.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
Javier Carrasco
e264b086f4 iio: humidity: hdc3020: add reset management
The HDC3020 provides an active low reset signal that must be handled if
connected. Asserting this signal turns the device into Trigger-on Demand
measurement mode, reducing its power consumption when no measurements
are required like in low-power modes.

According to the datasheet, the longest "Reset Ready" is 3 ms, which is
only taken into account if the reset signal is defined.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-hdc3020-pm-v3-3-48bc02b5241b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
Javier Carrasco
137166ef5f dt-bindings: iio: humidity: hdc3020: add reset-gpios
The HDC3020 provides an active low reset signal that is still not
described in the bindings.

Add reset-gpios to the bindings and the example.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-hdc3020-pm-v3-2-48bc02b5241b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
Javier Carrasco
f764c293a1 iio: humidity: hdc3020: add power management
The HDC3020 sensor carries out periodic measurements during normal
operation, but as long as the power supply is enabled, it will carry on
in low-power modes. In order to avoid that and reduce power consumption,
the device can be switched to Trigger-on Demand mode, and if possible,
turn off its regulator.

According to the datasheet, the maximum "Power Up Ready" is 5 ms.

Add resume/suspend pm operations to manage measurement mode and
regulator state.

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-hdc3020-pm-v3-1-48bc02b5241b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
David Lechner
d1efcf8871 iio: adc: ad7944: add driver for AD7944/AD7985/AD7986
This adds a driver for the Analog Devices Inc. AD7944, AD7985, and
AD7986 ADCs. These are a family of pin-compatible ADCs that can sample
at rates up to 2.5 MSPS.

The initial driver adds support for sampling at lower rates using the
usual IIO triggered buffer and can handle all 3 possible reference
voltage configurations.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240304-ad7944-mainline-v5-2-f0a38cea8901@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
David Lechner
59346366e5 dt-bindings: iio: adc: add ad7944 ADCs
This adds a new binding for the Analog Devices, Inc. AD7944, AD7985, and
AD7986 ADCs.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240304-ad7944-mainline-v5-1-f0a38cea8901@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
Andy Shevchenko
1c5aa559a6 iio: adc: twl4030-madc: Make use of device properties
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240304144037.1036390-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
Dumitru Ceclan
37ae8381cc iio: adc: ad7173: add support for additional models
Add support for Analog Devices AD7172-2, AD7175-8, AD7177-2.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240306110956.13167-4-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:13 +00:00
Dumitru Ceclan
393310526b iio: adc: ad7173: improve chip id's defines
Rename to AD7172_2_ID to avoid confusion with _4 model.
Reorder id's by reg value.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240306110956.13167-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Dumitru Ceclan
88a1ffc690 dt-bindings: adc: ad7173: add support for additional models
Add support for: AD7172-2, AD7175-8, AD7177-2.
AD7172-4 does not feature an internal reference, check for external
 reference presence.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20240306110956.13167-2-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Subhajit Ghosh
620d1e6c7a iio: light: Add support for APDS9306 Light Sensor
Driver support for Avago (Broadcom) APDS9306 Ambient Light Sensor.
It has two channels - ALS and CLEAR. The ALS (Ambient Light Sensor)
channel approximates the response of the human-eye providing direct
read out where the output count is proportional to ambient light levels.
It is internally temperature compensated and rejects 50Hz and 60Hz flicker
caused by artificial light sources. Hardware interrupt configuration is
optional. It is a low power device with 20 bit resolution and has
configurable adaptive interrupt mode and interrupt persistence mode.
The device also features inbuilt hardware gain, multiple integration time
selection options and sampling frequency selection options.

This driver also uses the IIO GTS (Gain Time Scale) Helpers Namespace for
Scales, Gains and Integration time implementation.

Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-6-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Subhajit Ghosh
f31f1f27b0 dt-bindings: iio: light: Avago APDS9306
Extend avago,apds9300.yaml schema file to support apds9306 device.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-5-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Subhajit Ghosh
2f8608f71b dt-bindings: iio: light: adps9300: Update interrupt definitions
Include irq.h and irq level macro in the example for readability

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-4-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Subhajit Ghosh
59ee18822a dt-bindings: iio: light: adps9300: Add missing vdd-supply
All devices covered by the binding have a vdd supply.

Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-3-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Subhajit Ghosh
9278524c48 dt-bindings: iio: light: Merge APDS9300 and APDS9960 schemas
Merge very similar schemas for APDS9300 and APDS9960.

Suggested-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/all/4e785d2e-d310-4592-a75a-13549938dcef@linaro.org/
Signed-off-by: Subhajit Ghosh <subhajit.ghosh@tweaklogic.com>
Link: https://lore.kernel.org/r/20240309105031.10313-2-subhajit.ghosh@tweaklogic.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Andy Shevchenko
5c4e411566 iio: core: Calculate alloc_size only once in iio_device_alloc()
No need to rewrite the value, instead use 'else' branch.
This will also help further refactoring the code later on.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240304140650.977784-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Andy Shevchenko
f0245ab389 iio: core: Leave private pointer NULL when no private data supplied
In iio_device_alloc() when size of the private data is 0,
the private pointer is calculated to point behind the valid data.
Leave it NULL when no private data supplied.

Fixes: 6d4ebd565d ("iio: core: wrap IIO device into an iio_dev_opaque object")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20240304140650.977784-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Javier Carrasco
cb98410db7 iio: imu: st_lsm6dsx: drop casting to void in dev_set_drvdata
The C standard specifies that there is no need to cast from a pointer to
void [1]. Therefore, it can be safely dropped.

[1] C Standard Committee: https://c0x.shape-of-code.com/6.3.2.3.html

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-void_in_dev_set_drvdata-v1-4-ae39027d740b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Javier Carrasco
8c5b0ea617 iio: humidity: hts211: drop casting to void in dev_set_drvdata
The C standard specifies that there is no need to cast from a pointer to
void [1]. Therefore, it can be safely dropped.

[1] C Standard Committee: https://c0x.shape-of-code.com/6.3.2.3.html

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-void_in_dev_set_drvdata-v1-3-ae39027d740b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Javier Carrasco
ba7352d019 io: light: st_uvis25: drop casting to void in dev_set_drvdata
The C standard specifies that there is no need to cast from a pointer to
void [1]. Therefore, it can be safely dropped.

[1] C Standard Committee: https://c0x.shape-of-code.com/6.3.2.3.html

Signed-off-by: Javier Carrasco <javier.carrasco.cruz@gmail.com>
Link: https://lore.kernel.org/r/20240303-void_in_dev_set_drvdata-v1-2-ae39027d740b@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:12 +00:00
Dumitru Ceclan
76a1e6a428 iio: adc: ad7173: add AD7173 driver
The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel
applications or higher speed multiplexed applications. The Sigma-Delta
ADC is intended primarily for measurement of signals close to DC but also
delivers outstanding performance with input bandwidths out to ~10kHz.

Reviewed-by: Andy Shevchenko <andy@kernel.org>
Reviewed-by: Michael Walle <michael@walle.cc> # for gpio-regmap
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20240228110622.25114-3-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:11 +00:00
Dumitru Ceclan
7b0c9f8fa3 iio: adc: ad_sigma_delta: Add optional irq selection
Add optional irq_num attribute to ad_sigma_delta_info structure for
selecting the used interrupt line for ADC's conversion completion.

Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Link: https://lore.kernel.org/r/20240228110622.25114-2-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:11 +00:00
Dumitru Ceclan
3d50d03f21 dt-bindings: adc: add AD7173
The AD7173 family offer a complete integrated Sigma-Delta ADC solution
which can be used in high precision, low noise single channel applications
or higher speed multiplexed applications. The Sigma-Delta ADC is intended
primarily for measurement of signals close to DC but also delivers
outstanding performance with input bandwidths out to ~10kHz.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Dumitru Ceclan <mitrutzceclan@gmail.com>
Link: https://lore.kernel.org/r/20240228110622.25114-1-mitrutzceclan@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:11 +00:00
Andy Shevchenko
9266dba068 iio: adc: spear_adc: Make use of device properties
Convert the module to be property provider agnostic and allow
it to be used on non-OF platforms.

Include mod_devicetable.h explicitly to replace the dropped of.h
which included mod_devicetable.h indirectly.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20240228203023.3609181-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2024-03-25 20:10:11 +00:00
Michal Swiatkowski
4498159a50 ice: count representor stats
Removing control plane VSI result in no information about slow-path
statistic. In current solution statistics need to be counted in driver.

Patch is based on similar implementation done by Simon Horman in nfp:
commit eadfa4c3be ("nfp: add stats and xmit helpers for representors")

Add const modifier to netdev parameter in ice_netdev_to_repr(). It isn't
(and shouldn't be) modified in the function.

Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25 13:09:36 -07:00
Martin K. Petersen
4f378a7501 Merge patch series "Add LIBSAS_SHT_BASE for libsas"
John Garry <john.g.garry@oracle.com> says:

There is much duplication in the scsi_host_template structure for the
drivers which use libsas.

Similar to how a standard template is used in libata with
__ATA_BASE_SHT, create a standard template in LIBSAS_SHT_BASE.

Link: https://lore.kernel.org/r/20240308114339.1340549-1-john.g.garry@oracle.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:09:36 -04:00
Michal Swiatkowski
44ba608db5 ice: do switchdev slow-path Rx using PF VSI
Add an ICE_RX_FLAG_MULTIDEV flag to Rx ring.

If it is set try to find correct port representor. Do it based on
src_vsi value stored in flex descriptor. Ids of representor pointers
stored in xarray are equal to corresponding src_vsi value. Thanks to
that we can directly get correct representor if we have src_vsi value.

Set multidev flag during ring configuration.

If the mode is switchdev, change the ring descriptor to the one that
contains src_vsi value.

PF netdev should be reconfigured, do it by calling ice_down() and
ice_up() if the netdev was up before configuring switchdev.

Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25 13:08:47 -07:00
John Garry
92a59bc85c scsi: isci: Use LIBSAS_SHT_BASE
Use standard template for scsi_host_template structure to reduce
duplication.

Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240308114339.1340549-7-john.g.garry@oracle.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:08:30 -04:00
John Garry
f1604214fd scsi: mvsas: Use LIBSAS_SHT_BASE
Use standard template for scsi_host_template structure to reduce
duplication.

Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240308114339.1340549-6-john.g.garry@oracle.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:08:30 -04:00
John Garry
30993a6b27 scsi: aic94xx: Use LIBSAS_SHT_BASE
Use standard template for scsi_host_template structure to reduce
duplication.

Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240308114339.1340549-5-john.g.garry@oracle.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:08:30 -04:00
John Garry
d53e4d7756 scsi: hisi_sas: Use LIBSAS_SHT_BASE_NO_SLAVE_INIT
Use standard template for scsi_host_template structure to reduce
duplication.

Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240308114339.1340549-4-john.g.garry@oracle.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:08:30 -04:00
John Garry
ad802f7f27 scsi: pm8001: Use LIBSAS_SHT_BASE
Use standard template for scsi_host_template structure to reduce
duplication.

Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240308114339.1340549-3-john.g.garry@oracle.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:08:30 -04:00
John Garry
bcd39f639e scsi: libsas: Add LIBSAS_SHT_BASE
There is much duplication in the scsi_host_template structure for the
drivers which use libsas.

Similar to how a standard template is used in libata with __ATA_BASE_SHT,
create a standard template in LIBSAS_SHT_BASE.

Don't set a default for max_sectors at SCSI_DEFAULT_MAX_SECTORS, as
scsi_host_alloc() will default to this value automatically.

Even though some drivers don't set proc_name, it won't make much difference
to set as DRV_NAME.

Also add LIBSAS_SHT_BASE_NO_SLAVE_INIT for the hisi_sas drivers which have
custom .slave_alloc and .slave_configure methods.

Reviewed-by: Jason Yan <yanaijie@huawei.com>
Signed-off-by: John Garry <john.g.garry@oracle.com>
Link: https://lore.kernel.org/r/20240308114339.1340549-2-john.g.garry@oracle.com
Reviewed-by: Igor Pylypiv <ipylypiv@google.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:08:30 -04:00
Michal Swiatkowski
6235cb6e5b ice: change repr::id values
Instead of getting repr::id from xa_alloc() value, set it to the
src_vsi::num_vsi value. It is unique for each PR.

Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25 13:08:05 -07:00
Michal Swiatkowski
33bf1e8623 ice: remove switchdev control plane VSI
For slow-path Rx and Tx PF VSI is used. There is no need to have control
plane VSI. Remove all code related to it.

Eswitch rebuild can't fail without rebuilding control plane VSI. Return
void from ice_eswitch_rebuild().

Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25 13:08:05 -07:00
Michal Swiatkowski
9cba6e1767 ice: control default Tx rule in lag
Tx rule in switchdev was changed to use PF instead of additional control
plane VSI. Because of that during lag we should control it. Control
means to add and remove the default Tx rule during lag active/inactive
switching.

It can be done the same way as default Rx rule.

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25 13:08:05 -07:00
Michal Swiatkowski
50d62022f4 ice: default Tx rule instead of to queue
Steer all packets that miss other rules to PF VSI. Previously in
switchdev mode, PF VSI received missed packets, but only ones marked
as Rx. Now it is receiving all missed packets.

To queue rule per PR isn't needed, because we use PF VSI instead of
control VSI now, and it's already correctly configured.

Add flag to correctly set LAN_EN bit in default Tx rule. It shouldn't
allow packet to go outside when there is a match.

Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25 13:08:05 -07:00
Michal Swiatkowski
defd52455a ice: do Tx through PF netdev in slow-path
Tx can be done using PF netdev.

Checks before Tx are unnecessary. Checking if switchdev mode is set
seems too defensive (there is no PR netdev in legacy mode). If
corresponding VF is disabled or during reset, PR netdev also should be
down.

Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25 13:08:04 -07:00
Michal Swiatkowski
8c67b7a914 ice: remove eswitch changing queues algorithm
Changing queues used by eswitch will be done through PF netdev.
There is no need to reserve queues if the number of used queues
is known.

Reviewed-by: Wojciech Drewek <wojciech.drewek@intel.com>
Reviewed-by: Marcin Szycik <marcin.szycik@linux.intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Tested-by: Sujai Buvaneswaran <sujai.buvaneswaran@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
2024-03-25 13:08:04 -07:00
Martin K. Petersen
e595ae7d07 Merge patch series "NCQ Priority sysfs sttributes for libsas"
Igor Pylypiv <ipylypiv@google.com> says:

This patch series adds ncq_prio_supported and ncq_prio_enable sysfs
attributes for libsas managed SATA devices. Existing libata sysfs
attributes cannot be used directly because the ata_port location is
different for libsas.

Link: https://lore.kernel.org/r/20240307214418.3812290-1-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:01:29 -04:00
Igor Pylypiv
c65c4360b3 scsi: isci: Add libsas SATA sysfs attributes group
The added sysfs attributes group enables the configuration of NCQ Priority
feature for HBAs that rely on libsas to manage SATA devices.

Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240307214418.3812290-8-ipylypiv@google.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:00:07 -04:00
Igor Pylypiv
14cc341229 scsi: aic94xx: Add libsas SATA sysfs attributes group
The added sysfs attributes group enables the configuration of NCQ Priority
feature for HBAs that rely on libsas to manage SATA devices.

Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240307214418.3812290-7-ipylypiv@google.com
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:00:07 -04:00
Igor Pylypiv
a23971e8ff scsi: hisi_sas: Add libsas SATA sysfs attributes group
The added sysfs attributes group enables the configuration of NCQ Priority
feature for HBAs that rely on libsas to manage SATA devices.

Omitted hisi_sas_v1_hw.c because v1 HW doesn't support SATA.

Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240307214418.3812290-6-ipylypiv@google.com
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:00:07 -04:00
Igor Pylypiv
95ee29a7b3 scsi: mvsas: Add libsas SATA sysfs attributes group
The added sysfs attributes group enables the configuration of NCQ Priority
feature for HBAs that rely on libsas to manage SATA devices.

Reviewed-by: John Garry <john.g.garry@oracle.com>
Reviewed-by: Damien Le Moal <dlemoal@kernel.org>
Reviewed-by: Jason Yan <yanaijie@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Igor Pylypiv <ipylypiv@google.com>
Link: https://lore.kernel.org/r/20240307214418.3812290-5-ipylypiv@google.com
Reviewed-by: Niklas Cassel <cassel@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2024-03-25 16:00:07 -04:00