Commit graph

1,308,922 commits

Author SHA1 Message Date
Andrii Nakryiko
d4dfc5700e bpf: pass whole link instead of prog when triggering raw tracepoint
Instead of passing prog as an argument to bpf_trace_runX() helpers, that
are called from tracepoint triggering calls, store BPF link itself
(struct bpf_raw_tp_link for raw tracepoints). This will allow to pass
extra information like BPF cookie into raw tracepoint registration.

Instead of replacing `struct bpf_prog *prog = __data;` with
corresponding `struct bpf_raw_tp_link *link = __data;` assignment in
`__bpf_trace_##call` I just passed `__data` through into underlying
bpf_trace_runX() call. This works well because we implicitly cast `void *`,
and it also avoids naming clashes with arguments coming from
tracepoint's "proto" list. We could have run into the same problem with
"prog", we just happened to not have a tracepoint that has "prog" input
argument. We are less lucky with "link", as there are tracepoints using
"link" argument name already. So instead of trying to avoid naming
conflicts, let's just remove intermediate local variable. It doesn't
hurt readibility, it's either way a bit of a maze of calls and macros,
that requires careful reading.

Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-3-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-19 23:05:33 -07:00
Andrii Nakryiko
6b9c2950c9 bpf: flatten bpf_probe_register call chain
bpf_probe_register() and __bpf_probe_register() have identical
signatures and bpf_probe_register() just redirect to
__bpf_probe_register(). So get rid of this extra function call step to
simplify following the source code.

It has no difference at runtime due to inlining, of course.

Acked-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319233852.1977493-2-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-19 23:05:33 -07:00
Puranjay Mohan
114b5b3b4b bpf, arm64: fix bug in BPF_LDX_MEMSX
A64_LDRSW() takes three registers: Xt, Xn, Xm as arguments and it loads
and sign extends the value at address Xn + Xm into register Xt.

Currently, the offset is being directly used in place of the tmp
register which has the offset already loaded by the last emitted
instruction.

This will cause JIT failures. The easiest way to reproduce this is to
test the following code through test_bpf module:

{
	"BPF_LDX_MEMSX | BPF_W",
	.u.insns_int = {
		BPF_LD_IMM64(R1, 0x00000000deadbeefULL),
		BPF_LD_IMM64(R2, 0xffffffffdeadbeefULL),
		BPF_STX_MEM(BPF_DW, R10, R1, -7),
		BPF_LDX_MEMSX(BPF_W, R0, R10, -7),
		BPF_JMP_REG(BPF_JNE, R0, R2, 1),
		BPF_ALU64_IMM(BPF_MOV, R0, 0),
		BPF_EXIT_INSN(),
	},
	INTERNAL,
	{ },
	{ { 0, 0 } },
	.stack_depth = 7,
},

We need to use the offset as -7 to trigger this code path, there could
be other valid ways to trigger this from proper BPF programs as well.

This code is rejected by the JIT because -7 is passed to A64_LDRSW() but
it expects a valid register (0 - 31).

 roott@pjy:~# modprobe test_bpf test_name="BPF_LDX_MEMSX | BPF_W"
 [11300.490371] test_bpf: test_bpf: set 'test_bpf' as the default test_suite.
 [11300.491750] test_bpf: #345 BPF_LDX_MEMSX | BPF_W
 [11300.493179] aarch64_insn_encode_register: unknown register encoding -7
 [11300.494133] aarch64_insn_encode_register: unknown register encoding -7
 [11300.495292] FAIL to select_runtime err=-524
 [11300.496804] test_bpf: Summary: 0 PASSED, 1 FAILED, [0/0 JIT'ed]
 modprobe: ERROR: could not insert 'test_bpf': Invalid argument

Applying this patch fixes the issue.

 root@pjy:~# modprobe test_bpf test_name="BPF_LDX_MEMSX | BPF_W"
 [  292.837436] test_bpf: test_bpf: set 'test_bpf' as the default test_suite.
 [  292.839416] test_bpf: #345 BPF_LDX_MEMSX | BPF_W jited:1 156 PASS
 [  292.844794] test_bpf: Summary: 1 PASSED, 0 FAILED, [1/1 JIT'ed]

Fixes: cc88f540da ("bpf, arm64: Support sign-extension load instructions")
Signed-off-by: Puranjay Mohan <puranjay12@gmail.com>
Message-ID: <20240312235917.103626-1-puranjay12@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-19 22:55:19 -07:00
Andrii Nakryiko
5ab8cb89db libbpf: fix u64-to-pointer cast on 32-bit arches
It's been reported that (void *)map->map_extra is causing compilation
warnings on 32-bit architectures. It's easy enough to fix this by
casting to long first.

Fixes: 79ff13e991 ("libbpf: Add support for bpf_arena.")
Reported-by: Ryan Eatmon <reatmon@ti.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Message-ID: <20240319215143.1279312-1-andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-19 22:54:04 -07:00
Ilya Leoshkevich
7ded842b35 s390/bpf: Fix bpf_plt pointer arithmetic
Kui-Feng Lee reported a crash on s390x triggered by the
dummy_st_ops/dummy_init_ptr_arg test [1]:

  [<0000000000000002>] 0x2
  [<00000000009d5cde>] bpf_struct_ops_test_run+0x156/0x250
  [<000000000033145a>] __sys_bpf+0xa1a/0xd00
  [<00000000003319dc>] __s390x_sys_bpf+0x44/0x50
  [<0000000000c4382c>] __do_syscall+0x244/0x300
  [<0000000000c59a40>] system_call+0x70/0x98

This is caused by GCC moving memcpy() after assignments in
bpf_jit_plt(), resulting in NULL pointers being written instead of
the return and the target addresses.

Looking at the GCC internals, the reordering is allowed because the
alias analysis thinks that the memcpy() destination and the assignments'
left-hand-sides are based on different objects: new_plt and
bpf_plt_ret/bpf_plt_target respectively, and therefore they cannot
alias.

This is in turn due to a violation of the C standard:

  When two pointers are subtracted, both shall point to elements of the
  same array object, or one past the last element of the array object
  ...

From the C's perspective, bpf_plt_ret and bpf_plt are distinct objects
and cannot be subtracted. In the practical terms, doing so confuses the
GCC's alias analysis.

The code was written this way in order to let the C side know a few
offsets defined in the assembly. While nice, this is by no means
necessary. Fix the noncompliance by hardcoding these offsets.

[1] https://lore.kernel.org/bpf/c9923c1d-971d-4022-8dc8-1364e929d34c@gmail.com/

Fixes: f1d5df84cd ("s390/bpf: Implement bpf_arch_text_poke()")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240320015515.11883-1-iii@linux.ibm.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
2024-03-19 22:52:43 -07:00
Niranjana Vishwanathapura
c9cc3d6586 drm/xe: Use correct function pointer type
Use xe_exec_queue_user_extension_fn type for
exec_queue_user_extension_funcs.`

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319174919.1847-1-niranjana.vishwanathapura@intel.com
2024-03-19 22:36:38 -07:00
Niranjana Vishwanathapura
260fa80d4a drm/xe: Streamline exec queue freeing path
Ensure exec queue freeing happens at one place, that is in
__xe_exec_queue_free(). It releases q->vm reference also. Set
q->vm before handling extensions as they can potentially reference it.

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319175947.15890-1-niranjana.vishwanathapura@intel.com
2024-03-19 22:36:30 -07:00
Niranjana Vishwanathapura
aacf3f629a drm/xe: Separate out sched/deregister_done handling
Abstract out the core part of sched_done and deregister_done handlers
to separate functions to decouple them from any protocol error handling
part and make them more readable.

Signed-off-by: Niranjana Vishwanathapura <niranjana.vishwanathapura@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240319184153.16667-1-niranjana.vishwanathapura@intel.com
2024-03-19 22:36:15 -07:00
Ankit Nautiyal
183e2568b8 drm/i915/scaler: Update Pipe src size check in skl_update_scaler
For Earlier platforms, the Pipe source size is 12-bits so
max pipe source width and height is 4096. For newer platforms it is
13-bits so theoretically max width/height is 8192. For few of the
earlier platforms the scaler did not use all bits of the PIPESRC,
so max scaler source size was used to make that the pipe source
size is programmed within limits, before using scaler.

This creates a problem, for MTL where scaler source size is 4096, but
max pipe source width can theroretically be 8192.

Switch the check to use the max scaler destination size, which closely
match the limits.

Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240313143825.3461208-1-ankit.k.nautiyal@intel.com
2024-03-20 11:03:28 +05:30
Daniel Bristot de Oliveira
a23c05fd76 tools/rtla: Add -U/--user-load option to timerlat
The timerlat tracer provides an interface for any application to wait
for the timerlat's periodic wakeup. Currently, rtla timerlat uses it
to dispatch its user-space workload (-u option).

But as the tracer interface is generic, rtla timerlat can also be used
to monitor any workload that uses it. For example, a user might
place their own workload to wait on the tracer interface, and
monitor the results with rtla timerlat.

Add the -U option to rtla timerlat top and hist. With this option, rtla
timerlat will not dispatch its workload but only setting up the
system, waiting for a user to dispatch its workload.

The sample code in this patch is an example of python application
that loops in the timerlat tracer fd.

To use it, dispatch:

 # rtla timerlat -U

In a terminal, then run the python program on another terminal,
specifying the CPU to run it. For example, setting on CPU 1:

 #./timerlat_load.py 1

Then rtla timerlat will start printing the statistics of the
./timerlat_load.py app.

An interesting point is that the "Ret user Timer Latency" value
is the overall response time of the load. The sample load does
a memory copy to exemplify that.

The stop tracing options on rtla timerlat works in this setup
as well, including auto analysis.

Link: https://lkml.kernel.org/r/36e6bcf18fe15c7601048fd4c65aeb193c502cc8.1707229706.git.bristot@kernel.org

Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-03-20 05:39:06 +01:00
Daniel Bristot de Oliveira
012e4e77df tools/verification: Use tools/build makefiles on rv
Use tools/build/ makefiles to build rv, inheriting the benefits of
it. For example, having a proper way to handle dependencies.

Link: https://lkml.kernel.org/r/2a38a8f7b8dc65fa790381ec9ab42fb62beb2e25.1710519524.git.bristot@kernel.org

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-03-20 05:39:06 +01:00
Daniel Bristot de Oliveira
01474dc706 tools/rtla: Use tools/build makefiles to build rtla
Use tools/build/ makefiles to build rtla, inheriting the benefits of
it. For example, having a proper way to handle dependencies.

rtla is built using perf infra-structure when building inside the
kernel tree.

At this point, rtla diverges from perf in two points: Documentation
and tarball generation/build.

At the documentation level, rtla is one step ahead, placing the
documentation at Documentation/tools/rtla/, using the same build
tools as kernel documentation. The idea is to move perf
documentation to the same scheme and then share the same makefiles.

rtla has a tarball target that the (old) RHEL8 uses. The tarball was
kept using a simple standalone makefile for compatibility. The
standalone makefile shares most of the code, e.g., flags, with
regular buildings.

The tarball method was set as deprecated. If necessary, we can make
a rtla tarball like perf, which includes the entire tools/build.
But this would also require changes in the user side (the directory
structure changes, and probably the deps to build the package).

Inspired on perf and objtool.

Link: https://lkml.kernel.org/r/57563abf2715d22515c0c54a87cff3849eca5d52.1710519524.git.bristot@kernel.org

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-03-20 05:39:06 +01:00
Daniel Bristot de Oliveira
9d56c88e52 tools/tracing: Use tools/build makefiles on latency-collector
Use tools/build/ makefiles to build latency-collector, inheriting
the benefits of it. For example: Before this patch, a missing
tracefs/traceevents headers will result in fail like this:

  ~/linux/tools/tracing/latency $ make
  cc -Wall -Wextra -g -O2  -o latency-collector latency-collector.c -lpthread
  latency-collector.c:26:10: fatal error: tracefs.h: No such file or directory
     26 | #include <tracefs.h>
        |          ^~~~~~~~~~~
  compilation terminated.
  make: *** [Makefile:14: latency-collector] Error 1

Which is not that helpful. After this change it reports:

  ~/linux/tools/tracing/latency# make

  Auto-detecting system features:
  ...                           libtraceevent: [ OFF ]
  ...                              libtracefs: [ OFF ]

  libtraceevent is missing. Please install libtraceevent-dev/libtraceevent-devel
  libtracefs is missing. Please install libtracefs-dev/libtracefs-devel
  Makefile.config:29: *** Please, check the errors above..  Stop.

This type of output is common across other tools in tools/ like perf
and objtool.

Link: https://lkml.kernel.org/r/872420b0880b11304e4ba144a0086c6478c5b469.1710519524.git.bristot@kernel.org

Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: John Kacur <jkacur@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
2024-03-20 05:39:06 +01:00
Marek Vasut
172695f145 drm/lcdif: Do not disable clocks on already suspended hardware
In case the LCDIF is enabled in DT but unused, the clocks used by the
LCDIF are not enabled. Those clocks may even have a use count of 0 in
case there are no other users of those clocks. This can happen e.g. in
case the LCDIF drives HDMI bridge which has no panel plugged into the
HDMI connector.

Do not attempt to disable clocks in the suspend callback and re-enable
clocks in the resume callback unless the LCDIF is enabled and was in
use before the system entered suspend, otherwise the driver might end
up trying to disable clocks which are already disabled with use count
0, and would trigger a warning from clock core about this condition.

Note that the lcdif_rpm_suspend() and lcdif_rpm_resume() functions
internally perform the clocks disable and enable operations and act
as runtime PM hooks too.

Reviewed-by: Liu Ying <victor.liu@nxp.com>
Fixes: 9db35bb349 ("drm: lcdif: Add support for i.MX8MP LCDIF variant")
Signed-off-by: Marek Vasut <marex@denx.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240226082644.32603-1-marex@denx.de
2024-03-20 04:32:55 +01:00
Jakub Kicinski
94e3ca2fef ipsec-2024-03-19
-----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEH7ZpcWbFyOOp6OJbrB3Eaf9PW7cFAmX5b3MACgkQrB3Eaf9P
 W7dqhA/9Gxdwp4PawUhSpH3bOmzH+St13kxkq043FIGsvGEnYPGDzirpfi8mYQe9
 TPnjOrZegYIQPnAbv/EXxV5474d+E8a3sEkhO7djEyZKHeBIiRjpv+lv0XxBZSpo
 LgLkBX3hW1BDtdc/YBLCBt6jO9kYr7/NU2dBZ3eSCImrP7UHUIR3XV0bF3jf1vfl
 /7Md3z3nyAr9DmolSvklp6uO4Gxz+LRuZvs1BqrdY4SqAWRY5IZDKiou0u60kcDM
 KhUvqSxKA5GxxEWdc1AvKYwIulOniqpn4uqJSem2Td8HYxjXFJ5mweNcE7t6+f+v
 zccFHsNVjPZJKh2RXYeLOvemrWvsG52qWOdVGI++P7XkuciuinTiP63QWqAhFVLD
 0AyiHtOMxLhCWLNadpX8u8x+NzWrDdSApyqX+vODwdXSBkPa5peRlgxmX9iYYni4
 Lb3AXVcnxLfo1Mseh9AOsRDOan4JXwa8IcnWBOoRa1FXq0v5SDm02S+NdMNulIw9
 eUMLPc524UwhaycidPIS9vISbx5EUDeCPp8n7rKaim6bm876ixRy9Aysk9zo4ens
 rVlI/av7g2y5cCzooEp3dVM9T2tS2LtuGpErJ0Bp9oZWiSOm5Y2QJAtfLzolgEeo
 yL72lF5tBITb35/Iv+qIWxbIVAv8O782NtEyovq8maS8R+avltw=
 =scKE
 -----END PGP SIGNATURE-----

Merge tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec

Steffen Klassert says:

====================
pull request (net): ipsec 2024-03-19

1) Fix possible page_pool leak triggered by esp_output.
   From Dragos Tatulea.

2) Fix UDP encapsulation in software GSO path.
   From Leon Romanovsky.

* tag 'ipsec-2024-03-19' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec:
  xfrm: Allow UDP encapsulation only in offload modes
  net: esp: fix bad handling of pages from page_pool
====================

Link: https://lore.kernel.org/r/20240319110151.409825-1-steffen.klassert@secunet.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-19 19:44:03 -07:00
Jiri Pirko
78a2f5e6c1 devlink: fix port new reply cmd type
Due to a c&p error, port new reply fills-up cmd with wrong value,
any other existing port command replies and notifications.

Fix it by filling cmd with value DEVLINK_CMD_PORT_NEW.

Skimmed through devlink userspace implementations, none of them cares
about this cmd value.

Reported-by: Chenyuan Yang <chenyuan0y@gmail.com>
Closes: https://lore.kernel.org/all/ZfZcDxGV3tSy4qsV@cy-server/
Fixes: cd76dcd68d ("devlink: Support add and delete devlink port")
Signed-off-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Link: https://lore.kernel.org/r/20240318091908.2736542-1-jiri@resnulli.us
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-19 19:37:57 -07:00
Kuniyuki Iwashima
956c0d6191 tcp: Clear req->syncookie in reqsk_alloc().
syzkaller reported a read of uninit req->syncookie. [0]

Originally, req->syncookie was used only in tcp_conn_request()
to indicate if we need to encode SYN cookie in SYN+ACK, so the
field remains uninitialised in other places.

The commit 695751e31a ("bpf: tcp: Handle BPF SYN Cookie in
cookie_v[46]_check().") added another meaning in ACK path;
req->syncookie is set true if SYN cookie is validated by BPF
kfunc.

After the change, cookie_v[46]_check() always read req->syncookie,
but it is not initialised in the normal SYN cookie case as reported
by KMSAN.

Let's make sure we always initialise req->syncookie in reqsk_alloc().

[0]:
BUG: KMSAN: uninit-value in cookie_v4_check+0x22b7/0x29e0
 net/ipv4/syncookies.c:477
 cookie_v4_check+0x22b7/0x29e0 net/ipv4/syncookies.c:477
 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline]
 tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914
 tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
 ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
 dst_input include/net/dst.h:460 [inline]
 ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569
 __netif_receive_skb_one_core net/core/dev.c:5538 [inline]
 __netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652
 process_backlog+0x480/0x8b0 net/core/dev.c:5981
 __napi_poll+0xe7/0x980 net/core/dev.c:6632
 napi_poll net/core/dev.c:6701 [inline]
 net_rx_action+0x89d/0x1820 net/core/dev.c:6813
 __do_softirq+0x1c0/0x7d7 kernel/softirq.c:554
 do_softirq+0x9a/0x100 kernel/softirq.c:455
 __local_bh_enable_ip+0x9f/0xb0 kernel/softirq.c:382
 local_bh_enable include/linux/bottom_half.h:33 [inline]
 rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
 __dev_queue_xmit+0x2776/0x52c0 net/core/dev.c:4362
 dev_queue_xmit include/linux/netdevice.h:3091 [inline]
 neigh_hh_output include/net/neighbour.h:526 [inline]
 neigh_output include/net/neighbour.h:540 [inline]
 ip_finish_output2+0x187a/0x1b70 net/ipv4/ip_output.c:235
 __ip_finish_output+0x287/0x810
 ip_finish_output+0x4b/0x550 net/ipv4/ip_output.c:323
 NF_HOOK_COND include/linux/netfilter.h:303 [inline]
 ip_output+0x15f/0x3f0 net/ipv4/ip_output.c:433
 dst_output include/net/dst.h:450 [inline]
 ip_local_out net/ipv4/ip_output.c:129 [inline]
 __ip_queue_xmit+0x1e93/0x2030 net/ipv4/ip_output.c:535
 ip_queue_xmit+0x60/0x80 net/ipv4/ip_output.c:549
 __tcp_transmit_skb+0x3c70/0x4890 net/ipv4/tcp_output.c:1462
 tcp_transmit_skb net/ipv4/tcp_output.c:1480 [inline]
 tcp_write_xmit+0x3ee1/0x8900 net/ipv4/tcp_output.c:2792
 __tcp_push_pending_frames net/ipv4/tcp_output.c:2977 [inline]
 tcp_send_fin+0xa90/0x12e0 net/ipv4/tcp_output.c:3578
 tcp_shutdown+0x198/0x1f0 net/ipv4/tcp.c:2716
 inet_shutdown+0x33f/0x5b0 net/ipv4/af_inet.c:923
 __sys_shutdown_sock net/socket.c:2425 [inline]
 __sys_shutdown net/socket.c:2437 [inline]
 __do_sys_shutdown net/socket.c:2445 [inline]
 __se_sys_shutdown+0x2a4/0x440 net/socket.c:2443
 __x64_sys_shutdown+0x6c/0xa0 net/socket.c:2443
 do_syscall_64+0xd5/0x1f0
 entry_SYSCALL_64_after_hwframe+0x6d/0x75

Uninit was stored to memory at:
 reqsk_alloc include/net/request_sock.h:148 [inline]
 inet_reqsk_alloc+0x651/0x7a0 net/ipv4/tcp_input.c:6978
 cookie_tcp_reqsk_alloc+0xd4/0x900 net/ipv4/syncookies.c:328
 cookie_tcp_check net/ipv4/syncookies.c:388 [inline]
 cookie_v4_check+0x289f/0x29e0 net/ipv4/syncookies.c:420
 tcp_v4_cookie_check net/ipv4/tcp_ipv4.c:1855 [inline]
 tcp_v4_do_rcv+0xb17/0x10b0 net/ipv4/tcp_ipv4.c:1914
 tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
 ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
 dst_input include/net/dst.h:460 [inline]
 ip_rcv_finish+0x4a2/0x520 net/ipv4/ip_input.c:449
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_rcv+0xcd/0x380 net/ipv4/ip_input.c:569
 __netif_receive_skb_one_core net/core/dev.c:5538 [inline]
 __netif_receive_skb+0x319/0x9e0 net/core/dev.c:5652
 process_backlog+0x480/0x8b0 net/core/dev.c:5981
 __napi_poll+0xe7/0x980 net/core/dev.c:6632
 napi_poll net/core/dev.c:6701 [inline]
 net_rx_action+0x89d/0x1820 net/core/dev.c:6813
 __do_softirq+0x1c0/0x7d7 kernel/softirq.c:554

Uninit was created at:
 __alloc_pages+0x9a7/0xe00 mm/page_alloc.c:4592
 __alloc_pages_node include/linux/gfp.h:238 [inline]
 alloc_pages_node include/linux/gfp.h:261 [inline]
 alloc_slab_page mm/slub.c:2175 [inline]
 allocate_slab mm/slub.c:2338 [inline]
 new_slab+0x2de/0x1400 mm/slub.c:2391
 ___slab_alloc+0x1184/0x33d0 mm/slub.c:3525
 __slab_alloc mm/slub.c:3610 [inline]
 __slab_alloc_node mm/slub.c:3663 [inline]
 slab_alloc_node mm/slub.c:3835 [inline]
 kmem_cache_alloc+0x6d3/0xbe0 mm/slub.c:3852
 reqsk_alloc include/net/request_sock.h:131 [inline]
 inet_reqsk_alloc+0x66/0x7a0 net/ipv4/tcp_input.c:6978
 tcp_conn_request+0x484/0x44e0 net/ipv4/tcp_input.c:7135
 tcp_v4_conn_request+0x16f/0x1d0 net/ipv4/tcp_ipv4.c:1716
 tcp_rcv_state_process+0x2e5/0x4bb0 net/ipv4/tcp_input.c:6655
 tcp_v4_do_rcv+0xbfd/0x10b0 net/ipv4/tcp_ipv4.c:1929
 tcp_v4_rcv+0x4ce4/0x5420 net/ipv4/tcp_ipv4.c:2322
 ip_protocol_deliver_rcu+0x2a3/0x13d0 net/ipv4/ip_input.c:205
 ip_local_deliver_finish+0x332/0x500 net/ipv4/ip_input.c:233
 NF_HOOK include/linux/netfilter.h:314 [inline]
 ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
 dst_input include/net/dst.h:460 [inline]
 ip_sublist_rcv_finish net/ipv4/ip_input.c:580 [inline]
 ip_list_rcv_finish net/ipv4/ip_input.c:631 [inline]
 ip_sublist_rcv+0x15f3/0x17f0 net/ipv4/ip_input.c:639
 ip_list_rcv+0x9ef/0xa40 net/ipv4/ip_input.c:674
 __netif_receive_skb_list_ptype net/core/dev.c:5581 [inline]
 __netif_receive_skb_list_core+0x15c5/0x1670 net/core/dev.c:5629
 __netif_receive_skb_list net/core/dev.c:5681 [inline]
 netif_receive_skb_list_internal+0x106c/0x16f0 net/core/dev.c:5773
 gro_normal_list include/net/gro.h:438 [inline]
 napi_complete_done+0x425/0x880 net/core/dev.c:6113
 virtqueue_napi_complete drivers/net/virtio_net.c:465 [inline]
 virtnet_poll+0x149d/0x2240 drivers/net/virtio_net.c:2211
 __napi_poll+0xe7/0x980 net/core/dev.c:6632
 napi_poll net/core/dev.c:6701 [inline]
 net_rx_action+0x89d/0x1820 net/core/dev.c:6813
 __do_softirq+0x1c0/0x7d7 kernel/softirq.c:554

CPU: 0 PID: 16792 Comm: syz-executor.2 Not tainted 6.8.0-syzkaller-05562-g61387b8dcf1d #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024

Fixes: 695751e31a ("bpf: tcp: Handle BPF SYN Cookie in cookie_v[46]_check().")
Reported-by: syzkaller <syzkaller@googlegroups.com>
Reported-by: Eric Dumazet <edumazet@google.com>
Closes: https://lore.kernel.org/bpf/CANn89iKdN9c+C_2JAUbc+VY3DDQjAQukMtiBbormAmAk9CdvQA@mail.gmail.com/
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Acked-by: Martin KaFai Lau <martin.lau@kernel.org>
Link: https://lore.kernel.org/r/20240315224710.55209-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-19 19:35:59 -07:00
Thinh Tran
d27e2da94a net/bnx2x: Prevent access to a freed page in page_pool
Fix race condition leading to system crash during EEH error handling

During EEH error recovery, the bnx2x driver's transmit timeout logic
could cause a race condition when handling reset tasks. The
bnx2x_tx_timeout() schedules reset tasks via bnx2x_sp_rtnl_task(),
which ultimately leads to bnx2x_nic_unload(). In bnx2x_nic_unload()
SGEs are freed using bnx2x_free_rx_sge_range(). However, this could
overlap with the EEH driver's attempt to reset the device using
bnx2x_io_slot_reset(), which also tries to free SGEs. This race
condition can result in system crashes due to accessing freed memory
locations in bnx2x_free_rx_sge()

799  static inline void bnx2x_free_rx_sge(struct bnx2x *bp,
800				struct bnx2x_fastpath *fp, u16 index)
801  {
802	struct sw_rx_page *sw_buf = &fp->rx_page_ring[index];
803     struct page *page = sw_buf->page;
....
where sw_buf was set to NULL after the call to dma_unmap_page()
by the preceding thread.

    EEH: Beginning: 'slot_reset'
    PCI 0011:01:00.0#10000: EEH: Invoking bnx2x->slot_reset()
    bnx2x: [bnx2x_io_slot_reset:14228(eth1)]IO slot reset initializing...
    bnx2x 0011:01:00.0: enabling device (0140 -> 0142)
    bnx2x: [bnx2x_io_slot_reset:14244(eth1)]IO slot reset --> driver unload
    Kernel attempted to read user page (0) - exploit attempt? (uid: 0)
    BUG: Kernel NULL pointer dereference on read at 0x00000000
    Faulting instruction address: 0xc0080000025065fc
    Oops: Kernel access of bad area, sig: 11 [#1]
    .....
    Call Trace:
    [c000000003c67a20] [c00800000250658c] bnx2x_io_slot_reset+0x204/0x610 [bnx2x] (unreliable)
    [c000000003c67af0] [c0000000000518a8] eeh_report_reset+0xb8/0xf0
    [c000000003c67b60] [c000000000052130] eeh_pe_report+0x180/0x550
    [c000000003c67c70] [c00000000005318c] eeh_handle_normal_event+0x84c/0xa60
    [c000000003c67d50] [c000000000053a84] eeh_event_handler+0xf4/0x170
    [c000000003c67da0] [c000000000194c58] kthread+0x1c8/0x1d0
    [c000000003c67e10] [c00000000000cf64] ret_from_kernel_thread+0x5c/0x64

To solve this issue, we need to verify page pool allocations before
freeing.

Fixes: 4cace675d6 ("bnx2x: Alloc 4k fragment for each rx ring buffer element")
Signed-off-by: Thinh Tran <thinhtr@linux.ibm.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240315205535.1321-1-thinhtr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-03-19 19:34:27 -07:00
Martin Kaistra
77f5924fc4 wifi: rtl8xxxu: enable MFP support
In order to connect to networks which require 802.11w, add the
MFP_CAPABLE flag and let mac80211 do the actual crypto in software.

When a robust management frames is received, rx_dec->swdec is not set,
even though the HW did not decrypt it. Extend the check and don't set
RX_FLAG_DECRYPTED for these frames in order to use SW decryption.

Signed-off-by: Martin Kaistra <martin.kaistra@linutronix.de>
Reviewed-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Link: https://msgid.link/20240314164850.86432-1-martin.kaistra@linutronix.de
2024-03-20 10:00:19 +08:00
Eric Chan
9133e6e690
riscv/barrier: Add missing space after ','
The past form of RISCV_FENCE would cause checkpatch.pl to issue
error messages, the example is as follows:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:27:
+#define __smp_mb()         RISCV_FENCE(rw,rw)
                                          ^
fix the remaining of RISCV_FENCE.

Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131328.3669364-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 18:52:25 -07:00
Eric Chan
c85688e2b0
riscv/barrier: Consolidate fence definitions
Disparate fence implementations are consolidated into fence.h.
Also introduce RISCV_FENCE_ASM to make fence macro more reusable.

Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131316.3668927-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 18:52:24 -07:00
Eric Chan
b3c8064ccc
riscv/barrier: Define RISCV_FULL_BARRIER
Introduce RISCV_FULL_BARRIER and use in arch_atomic* function.
like RISCV_ACQUIRE_BARRIER and RISCV_RELEASE_BARRIER, the fence
instruction can be eliminated When SMP is not enabled.

Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131302.3668481-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 18:52:23 -07:00
Eric Chan
89f4fd7b1a
riscv/barrier: Define __{mb,rmb,wmb}
Introduce __{mb,rmb,wmb}, and rely on the generic definitions for
{mb,rmb,wmb}. Although KCSAN is not supported yet, the definitions can
be made more consistent with generic instrumentation. Also add a space
to make the changes pass check by checkpatch.pl.
Without the space, the error message is as below:
ERROR: space required after that ',' (ctx:VxV)
26: FILE: arch/riscv/include/asm/barrier.h:23:
+#define __mb()         RISCV_FENCE(iorw,iorw)
                                        ^

Signed-off-by: Eric Chan <ericchancf@google.com>
Reviewed-by: Andrea Parri <parri.andrea@gmail.com>
Reviewed-by: Samuel Holland <samuel.holland@sifive.com>
Tested-by: Samuel Holland <samuel.holland@sifive.com>
Link: https://lore.kernel.org/r/20240217131249.3668103-1-ericchancf@google.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 18:52:22 -07:00
Sunil V L
282b9df4e9
RISC-V: defconfig: Enable CONFIG_ACPI_CPPC_CPUFREQ
CONFIG_ACPI_CPPC_CPUFREQ is required to enable CPPC for RISC-V.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 18:30:56 -07:00
Sunil V L
7ee1378736
cpufreq: Move CPPC configs to common Kconfig and add RISC-V
CPPC related config options are currently defined only in ARM specific
file. However, they are required for RISC-V as well. Instead of creating
a new Kconfig.riscv file and duplicating them, move them to the common
Kconfig file and enable RISC-V too.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 18:30:55 -07:00
Sunil V L
30f3ffbee8
ACPI: RISC-V: Add CPPC driver
Add cpufreq driver based on ACPI CPPC for RISC-V. The driver uses either
SBI CPPC interfaces or the CSRs to access the CPPC registers as defined
by the RISC-V FFH spec.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Pierre Gondois <pierre.gondois@arm.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Sudeep Holla <sudeep.holla@arm.com>
Link: https://lore.kernel.org/r/20240208034414.22579-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 18:30:54 -07:00
Sunil V L
359df7c5be
ACPI: Enable ACPI_PROCESSOR for RISC-V
The ACPI processor driver is not currently enabled for RISC-V.
This is required to enable CPU related functionalities like
LPI and CPPC. Hence, enable ACPI_PROCESSOR for RISC-V.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-4-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 17:51:40 -07:00
Sunil V L
4877fc9214
ACPI: RISC-V: Add LPI driver
Enable Low Power Idle (LPI) based cpuidle driver for RISC-V platforms.
It depends on SBI HSM calls for idle state transitions.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-3-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 17:51:39 -07:00
Sunil V L
6649182a38
cpuidle: RISC-V: Move few functions to arch/riscv
To support ACPI Low Power Idle (LPI), few functions are required which
are currently static functions in the DT based cpuidle driver. Hence,
move them under arch/riscv so that ACPI driver also can use them. Since
they are no longer static functions, append "riscv_" prefix to the
function name.

Signed-off-by: Sunil V L <sunilvl@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lore.kernel.org/r/20240118062930.245937-2-sunilvl@ventanamicro.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 17:51:38 -07:00
Linus Torvalds
a4145ce1e7 bcachefs fixes for 6.9-rc1
Assorted bugfixes.
 
 Most are fixes for simple assertion pops; the most significant fix is
 for a deadlock in recovery when we have to rewrite large numbers of
 btree nodes to fix errors. This was incorrectly running out of the same
 workqueue as the core interior btree update path - we now give it its
 own single threaded workqueue.
 
 This was visible to users as "bch2_btree_update_start(): error:
 BCH_ERR_journal_reclaim_would_deadlock" - and then recovery hanging.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEKnAFLkS8Qha+jvQrE6szbY3KbnYFAmX6CoYACgkQE6szbY3K
 bnZp2hAAwAw8haQKeR0+0aAaqTavvBcjcloeKlQhRl+OxV1rAgxcjKGai5txZ9rI
 d4FVOOo7MqHq1oN9Ydsy1+0R70eCFzhDxhT1Ph5MhIzc7nd8lC0GQjO0atx23cni
 4UZgSxi6quEP401MTVhvVbCPLmvfPJLpIBzptJUDS/eysxSZpS4A10gEzipoNjPv
 DOdrsvoo8nQX53tERJ/IxtroFL44p4y8OyZK65NILFF9xZosKz1P9ktrWufmRVoY
 /Hl8SUfhSNJDFW5pIMPOmoG/+RG+hJK4BaiNWPXLaSvO+3PmQskJ2tvHQVNjHQYt
 dMYWcy4hN47XtYvrHG9xmaQP+lZCDijdBrhmik4brqfZbloH43MVdDFysjfIPhUm
 qk+zzb0uE0ZhwRvQOjnYEQpHjXmj7Bm80+dhfNuuiKlhz4bOeDz8UZykJOzgD0zH
 n4cd+nbCxuogkukzLLQMbFv1+MCsCZpStkXP3GQXCK0k+H2briPGALuA74sxfAhH
 ajHLNr6qMU+uB6Ce0oM7e+9dPLfV/NalEwWW7aR/4TamxPBt575Hpjp0BV//BRfD
 IxdEKrMNdbKBJDUj1s5aTwcSF6ae6zHtyQXuKr93mWQqNvVXvX5/FPQYr70uA1VP
 iieBkde7aSTGCbTdTEcY9NcXdT2X/91aobsPvwGeq1z5Y1JJ0nU=
 =J/hu
 -----END PGP SIGNATURE-----

Merge tag 'bcachefs-2024-03-19' of https://evilpiepirate.org/git/bcachefs

Pull bcachefs fixes from Kent Overstreet:
 "Assorted bugfixes.

  Most are fixes for simple assertion pops; the most significant fix is
  for a deadlock in recovery when we have to rewrite large numbers of
  btree nodes to fix errors. This was incorrectly running out of the
  same workqueue as the core interior btree update path - we now give it
  its own single threaded workqueue.

  This was visible to users as "bch2_btree_update_start(): error:
  BCH_ERR_journal_reclaim_would_deadlock" - and then recovery hanging"

* tag 'bcachefs-2024-03-19' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix lost wakeup on journal shutdown
  bcachefs; Fix deadlock in bch2_btree_update_start()
  bcachefs: ratelimit errors from async_btree_node_rewrite
  bcachefs: Run check_topology() first
  bcachefs: Improve bch2_fatal_error()
  bcachefs: Fix lost transaction restart error
  bcachefs: Don't corrupt journal keys gap buffer when dropping alloc info
  bcachefs: fix for building in userspace
  bcachefs: bch2_snapshot_is_ancestor() now safe to call in early recovery
  bcachefs: Fix nested transaction restart handling in bch2_bucket_gens_init()
  bcachefs: Improve sysfs internal/btree_updates
  bcachefs: Split out btree_node_rewrite_worker
  bcachefs: Fix locking in bch2_alloc_write_key()
  bcachefs: Avoid extent entry type assertions in .invalid()
  bcachefs: Fix spurious -BCH_ERR_transaction_restart_nested
  bcachefs: Fix check_key_has_snapshot() call
  bcachefs: Change "accounting overran journal reservation" to a warning
2024-03-19 17:27:25 -07:00
Leonardo Bras
2a8986fc5e
riscv: Introduce set_compat_task() in asm/compat.h
In order to have all task compat bit access directly in compat.h, introduce
set_compat_task() to set/reset those when needed.

Also, since it's only used on an if/else scenario, simplify the macro using
it.

Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-7-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 16:39:40 -07:00
Leonardo Bras
5917ea17ad
riscv: Introduce is_compat_thread() into compat.h
task_user_regset_view() makes use of a function very similar to
is_compat_task(), but pointing to a any thread.

In arm64 asm/compat.h there is a function very similar to that:
is_compat_thread(struct thread_info *thread)

Copy this function to riscv asm/compat.h and make use of it into
task_user_regset_view().

Also, introduce a compile-time test for CONFIG_COMPAT and simplify the
function code by removing the #ifdef.

Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-6-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 16:39:39 -07:00
Leonardo Bras
4c0b5a4516
riscv: add compile-time test into is_compat_task()
Currently several places will test for CONFIG_COMPAT before testing
is_compat_task(), probably in order to avoid a run-time test into the task
structure.

Since is_compat_task() is an inlined function, it would be helpful to add a
compile-time test of CONFIG_COMPAT, making sure it always returns zero when
the option is not enabled during the kernel build.

With this, the compiler is able to understand in build-time that
is_compat_task() will always return 0, and optimize-out some of the extra
code introduced by the option.

This will also allow removing a lot #ifdefs that were introduced, and make
the code more clean.

Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Reviewed-by: Andy Chiu <andy.chiu@sifive.com>
Link: https://lore.kernel.org/r/20240103160024.70305-5-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 16:39:38 -07:00
Leonardo Bras
9dc3041924
riscv: Replace direct thread flag check with is_compat_task()
There is some code that detects compat mode into a task by checking the
flag directly, and other code that check using the helper is_compat_task().

Since the helper already exists, use it instead of checking the flags
directly.

Signed-off-by: Leonardo Bras <leobras@redhat.com>
Link: https://lore.kernel.org/r/20240103160024.70305-4-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 16:39:37 -07:00
Leonardo Bras
6be7ee4beb
riscv: Improve arch_get_mmap_end() macro
This macro caused me some confusion, which took some reviewer's time to
make it clear, so I propose adding a short comment in code to avoid
confusion in the future.

Also, added some improvements to the macro, such as removing the
assumption of VA_USER_SV57 being the largest address space.

Signed-off-by: Leonardo Bras <leobras@redhat.com>
Reviewed-by: Guo Ren <guoren@kernel.org>
Link: https://lore.kernel.org/r/20240103160024.70305-3-leobras@redhat.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2024-03-19 16:39:36 -07:00
Alessandro Carminati (Red Hat)
f803bcf920 selftests/bpf: Prevent client connect before server bind in test_tc_tunnel.sh
In some systems, the netcat server can incur in delay to start listening.
When this happens, the test can randomly fail in various points.
This is an example error message:

   # ip gre none gso
   # encap 192.168.1.1 to 192.168.1.2, type gre, mac none len 2000
   # test basic connectivity
   # Ncat: Connection refused.

The issue stems from a race condition between the netcat client and server.
The test author had addressed this problem by implementing a sleep, which
I have removed in this patch.
This patch introduces a function capable of sleeping for up to two seconds.
However, it can terminate the waiting period early if the port is reported
to be listening.

Signed-off-by: Alessandro Carminati (Red Hat) <alessandro.carminati@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240314105911.213411-1-alessandro.carminati@gmail.com
2024-03-19 16:16:09 -07:00
Andrew Morton
7191930894 Merge branch 'master' into mm-stable 2024-03-19 15:01:43 -07:00
Andrii Nakryiko
437ffcb0bf Merge branch 'current_pid_tgid-for-all-prog-types'
Yonghong Song says:

====================
current_pid_tgid() for all prog types

Currently bpf_get_current_pid_tgid() is allowed in tracing, cgroup
and sk_msg progs while bpf_get_ns_current_pid_tgid() is only allowed
in tracing progs.

We have an internal use case where for an application running
in a container (with pid namespace), user wants to get
the pid associated with the pid namespace in a cgroup bpf
program. Besides cgroup, the only prog type, supporting
bpf_get_current_pid_tgid() but not bpf_get_ns_current_pid_tgid(),
is sk_msg.

But actually both bpf_get_current_pid_tgid() and
bpf_get_ns_current_pid_tgid() helpers do not reveal kernel internal
data and there is no reason that they cannot be used in other
program types. This patch just did this and enabled these
two helpers for all program types.

Patch 1 added the kernel support and patches 2-5 added
the test for cgroup and sk_msg.

Change logs:
  v1 -> v2:
    - allow bpf_get_[ns_]current_pid_tgid() for all prog types.
    - for network related selftests, using netns.
====================

Link: https://lore.kernel.org/r/20240315184849.2974556-1-yonghong.song@linux.dev
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
2024-03-19 14:27:01 -07:00
Yonghong Song
4c195ee486 selftests/bpf: Add a sk_msg prog bpf_get_ns_current_pid_tgid() test
Add a sk_msg bpf program test where the program is running in a pid
namespace. The test is successful:
  #165/4   ns_current_pid_tgid/new_ns_sk_msg:OK

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184915.2976718-1-yonghong.song@linux.dev
2024-03-19 14:27:00 -07:00
Yonghong Song
87ade6cd85 selftests/bpf: Add a cgroup prog bpf_get_ns_current_pid_tgid() test
Add a cgroup bpf program test where the bpf program is running
in a pid namespace. The test is successfully:
  #165/3   ns_current_pid_tgid/new_ns_cgrp:OK

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184910.2976522-1-yonghong.song@linux.dev
2024-03-19 14:26:59 -07:00
Yonghong Song
4d4bd29e36 selftests/bpf: Refactor out some functions in ns_current_pid_tgid test
Refactor some functions in both user space code and bpf program
as these functions are used by later cgroup/sk_msg tests.
Another change is to mark tp program optional loading as later
patches will use optional loading as well since they have quite
different attachment and testing logic.

There is no functionality change.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184904.2976123-1-yonghong.song@linux.dev
2024-03-19 14:26:58 -07:00
Yonghong Song
84239a24d1 selftests/bpf: Replace CHECK with ASSERT_* in ns_current_pid_tgid test
Replace CHECK in selftest ns_current_pid_tgid with recommended ASSERT_* style.
I also shortened subtest name as the prefix of subtest name is covered
by the test name already.

This patch does fix a testing issue. Currently even if bss->user_{pid,tgid}
is not correct, the test still passed since the clone func returns 0.
I fixed it to return a non-zero value if bss->user_{pid,tgid} is incorrect.

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184859.2975543-1-yonghong.song@linux.dev
2024-03-19 14:24:37 -07:00
Yonghong Song
eb166e522c bpf: Allow helper bpf_get_[ns_]current_pid_tgid() for all prog types
Currently bpf_get_current_pid_tgid() is allowed in tracing, cgroup
and sk_msg progs while bpf_get_ns_current_pid_tgid() is only allowed
in tracing progs.

We have an internal use case where for an application running
in a container (with pid namespace), user wants to get
the pid associated with the pid namespace in a cgroup bpf
program. Currently, cgroup bpf progs already allow
bpf_get_current_pid_tgid(). Let us allow bpf_get_ns_current_pid_tgid()
as well.

With auditing the code, bpf_get_current_pid_tgid() is also used
by sk_msg prog. But there are no side effect to expose these two
helpers to all prog types since they do not reveal any kernel specific
data. The detailed discussion is in [1].

So with this patch, both bpf_get_current_pid_tgid() and bpf_get_ns_current_pid_tgid()
are put in bpf_base_func_proto(), making them available to all
program types.

  [1] https://lore.kernel.org/bpf/20240307232659.1115872-1-yonghong.song@linux.dev/

Signed-off-by: Yonghong Song <yonghong.song@linux.dev>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20240315184854.2975190-1-yonghong.song@linux.dev
2024-03-19 14:24:07 -07:00
Daniele Ceraolo Spurio
43c4ff3ca2 drm/xe/guc: Don't support older GuC 70.x releases
Supporting older GuC versions comes with baggage, both on the coding
side (due to interfaces only being available from a certain version
onwards) and on the testing side (due to having to make sure the driver
works as expected with older GuCs).
Since all of our Xe platform are still under force probe, we haven't
committed to support any specific GuC version and we therefore don't
need to support the older once, which means that we can force a bottom
limit to what GuC we accept. This allows us to remove any conditional
statements based on older GuC versions and also to approach newer
additions knowing that we'll never attempt to load something older
than our minimum requirement.

As an initial value, the minimum expected version is set to 70.19,
which is the version currently in the firmware table, but the
expectation is that this will be bumbed every time we update the
table, until we remove the force probe.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240304162616.824884-1-daniele.ceraolospurio@intel.com
2024-03-19 12:14:02 -07:00
Conor Dooley
1d63d1d9e5 perf: starfive: fix 64-bit only COMPILE_TEST condition
ARCH_STARFIVE is not restricted to 64-bit platforms, so while Will's
addition of a 64-bit only condition satisfied the build robots doing
COMPILE_TEST builds, Palmer ran into the same problems with writeq()
being undefined during regular rv32 builds.

Promote the dependency on 64-bit to its own `depends on` so that the
driver can never be included in 32-bit builds.

Reported-by: Palmer Dabbelt <palmer@rivosinc.com>
Fixes: c2b24812f7 ("perf: starfive: Add StarLink PMU support")
Fixes: f0dbc6d0de ("perf: starfive: Only allow COMPILE_TEST for 64-bit architectures")
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Acked-by: Will Deacon <will@kernel.org>
Reviewed-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Ji Sheng Teoh <jisheng.teoh@starfivetech.com>
Acked-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Link: https://lore.kernel.org/r/20240318-emphatic-rally-f177a4fe1bdc@spud
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2024-03-19 19:01:39 +00:00
Linus Torvalds
78c3925c04 ARM: late SoC changes for 6.9
These are changes that for some reason ended up not making it into the
 first four branches but that should still make it into 6.9:
 
  - A rework of the omap clock support that touches both drivers and
    device tree files
 
  - The reset controller branch changes that had a dependency on late
    bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
    drivers branch
 
  - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
    changes that got delayed and needed some extra time in linux-next
    for wider testing.
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCgAdFiEEiK/NIGsWEZVxh/FrYKtH/8kJUicFAmX5vYcACgkQYKtH/8kJ
 UiemkhAAu2lYNpttx+qVlEzQvPKyID5Y+E0cVRmM5e79/fOumNomSzFwtKztCbz2
 PV1CHwmDYANKsI8tl91PAe8PzD+9Er+8xa6YYVSMG5bLC2aGdF4k5hzMnRmfhlDe
 uRT/9iNH0w+S1p44+wXI9Y++uZhxJtCqa6kytxybl6YrG2/l3Wm0PVcMAD/MWT1l
 OULRg5gv3+7qHLKE0ffd0J7I7zCvKA5cEqnieGSO8+k1jsOE3BvgLttfPUuUsi3x
 8yWAJ2cEv293Cao8x8rw39TYIHQOznLMNzK/GCIemL4k9TafbGbuVPUGQZ6oX1SQ
 +/biiUV8CMLzanw2Ds7piQ/4J8EoJjh7jCf9pETORlHLaCMQaYUk4I2KnBWmjxuO
 QBy6Py68EkyT1zv7YFkpdxeABkwkrObMmVsjfyltd2lCF6oC+xbIw5IOVPgnUiTc
 WANL3y+hS5zv+ABmpkRhDPe9KrcoO95sJgGaoMPatwD1/2JkdV7EkvbXWdnipb1w
 REYk4xuRlJcAgyjc5nrQXR8FuPX63c08NFkOw+AInFV8ipyH+8nkesb0w54aegsR
 Tihhl0WUxk/e9FLFVlPiYRNdyqOb2HKteRwRxsA1LqqcWdpYjplBrkZhHb3+ESnP
 lQaQ7AtZRoIjwsImYen3M2W1cFS214BAqoonLLYSd0ponCB05Ng=
 =IzoE
 -----END PGP SIGNATURE-----

Merge tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc

Pull more ARM SoC updates from Arnd Bergmann:
 "These are changes that for some reason ended up not making it into the
  first four branches but that should still make it into 6.9:

   - A rework of the omap clock support that touches both drivers and
     device tree files

   - The reset controller branch changes that had a dependency on late
     bugfixes. Merging them here avoids a backmerge of 6.8-rc5 into the
     drivers branch

   - The RISC-V/starfive, RISC-V/microchip and ARM/Broadcom devicetree
     changes that got delayed and needed some extra time in linux-next
     for wider testing"

* tag 'soc-late-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (31 commits)
  soc: fsl: dpio: fix kcalloc() argument order
  bus: ts-nbus: Improve error reporting
  bus: ts-nbus: Convert to atomic pwm API
  riscv: dts: starfive: jh7110: Add camera subsystem nodes
  ARM: bcm: stop selecing CONFIG_TICK_ONESHOT
  ARM: dts: omap3: Update clksel clocks to use reg instead of ti,bit-shift
  ARM: dts: am3: Update clksel clocks to use reg instead of ti,bit-shift
  clk: ti: Improve clksel clock bit parsing for reg property
  clk: ti: Handle possible address in the node name
  dt-bindings: pwm: opencores: Add compatible for StarFive JH8100
  dt-bindings: riscv: cpus: reg matches hart ID
  reset: Instantiate reset GPIO controller for shared reset-gpios
  reset: gpio: Add GPIO-based reset controller
  cpufreq: do not open-code of_phandle_args_equal()
  of: Add of_phandle_args_equal() helper
  reset: simple: add support for Sophgo SG2042
  dt-bindings: reset: sophgo: support SG2042
  riscv: dts: microchip: add specific compatible for mpfs pdma
  riscv: dts: microchip: add missing CAN bus clocks
  ARM: brcmstb: Add debug UART entry for 74165
  ...
2024-03-19 11:57:26 -07:00
Linus Torvalds
f9c035492f more s390 updates for 6.9 merge window
- Various virtual vs physical address usage fixes
 
 - Add new bitwise types and helper functions and use them in s390 specific
   drivers and code to make it easier to find virtual vs physical address
   usage bugs. Right now virtual and physical addresses are identical for
   s390, except for module, vmalloc, and similar areas. This will be
   changed, hopefully with the next merge window, so that e.g. the kernel
   image and modules will be located close to each other, allowing for
   direct branches and also for some other simplifications.
 
   As a prerequisite this requires to fix all misuses of virtual and
   physical addresses. As it turned out people are so used to the concept
   that virtual and physical addresses are the same, that new bugs got added
   to code which was already fixed. In order to avoid that even more code
   gets merged which adds such bugs add and use new bitwise types, so that
   sparse can be used to find such usage bugs.
 
   Most likely the new types can go away again after some time
 
 - Provide a simple ARCH_HAS_DEBUG_VIRTUAL implementation
 
 - Fix kprobe branch handling: if an out-of-line single stepped relative
   branch instruction has a target address within a certain address area in
   the entry code, the program check handler may incorrectly execute cleanup
   code as if KVM code was executed, leading to crashes
 
 - Fix reference counting of zcrypt card objects
 
 - Various other small fixes and cleanups
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAmX5lIYACgkQIg7DeRsp
 bsJYxA//cYGSaopFLuHxQndQi5UcMx0NMcaD9auMyDraPWJH0/F+vIWnLPxgJ1wB
 zfav3Ssvdd/41rPIXHSGxUzXzv+EHCY5+91t4plfCxWtd1SbpJ8gG2vrXTH512ql
 RhJ7crRFQqoigIxlsdwUkwGSqd+L6H73ikKzQyAaJFKC/e9BEpCH4zb8NuTqCeJE
 a81/A8BGSIo4Fk4qj1T5bHZzkznmxtisMPGXzoKa28LKhzwqqbGZYeHohnkaT6co
 UpY/HMdhGH74kkKqpF0cLDI0Bd8ptfjbcVcKyJ8OD7vCfinIM3bZdYg0KIzyRMhu
 d49JDXctPiePXTCi8X+AJnhNYFGlHuDciEpTMzkw97kwhmCfAOW5UaAlBo8dJqat
 zt76Cxbl3D+hYI7Wbs9lt2QsXso4/1fMMNQbu9pwyMKxHlCBVe+ZqNIl0gP8OAXZ
 51pghcLlcwYNeYRkSzvfEhO9aeUsRg40O5UBCklVMRScrx7qie2wsllEFavb7vZd
 Ejv89dvn0KtzYIHG+U5SQ9d0x1JL9qApVM06sCGZGsBM9r4hHFGa8x57Pr+51ZPs
 j0qbr7iAWgCGXN8c3p/Nrev6eqBio81CpD9PWik7QpJS38EKkussqfPdQitgQpsi
 7r0Sx51oBzyAVadmVAf8/flUrbJTvD3BdbkzN99W4BXyARJk7CI=
 =Vh2x
 -----END PGP SIGNATURE-----

Merge tag 's390-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull more s390 updates from Heiko Carstens:

 - Various virtual vs physical address usage fixes

 - Add new bitwise types and helper functions and use them in s390
   specific drivers and code to make it easier to find virtual vs
   physical address usage bugs.

   Right now virtual and physical addresses are identical for s390,
   except for module, vmalloc, and similar areas. This will be changed,
   hopefully with the next merge window, so that e.g. the kernel image
   and modules will be located close to each other, allowing for direct
   branches and also for some other simplifications.

   As a prerequisite this requires to fix all misuses of virtual and
   physical addresses. As it turned out people are so used to the
   concept that virtual and physical addresses are the same, that new
   bugs got added to code which was already fixed. In order to avoid
   that even more code gets merged which adds such bugs add and use new
   bitwise types, so that sparse can be used to find such usage bugs.

   Most likely the new types can go away again after some time

 - Provide a simple ARCH_HAS_DEBUG_VIRTUAL implementation

 - Fix kprobe branch handling: if an out-of-line single stepped relative
   branch instruction has a target address within a certain address area
   in the entry code, the program check handler may incorrectly execute
   cleanup code as if KVM code was executed, leading to crashes

 - Fix reference counting of zcrypt card objects

 - Various other small fixes and cleanups

* tag 's390-6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
  s390/entry: compare gmap asce to determine guest/host fault
  s390/entry: remove OUTSIDE macro
  s390/entry: add CIF_SIE flag and remove sie64a() address check
  s390/cio: use while (i--) pattern to clean up
  s390/raw3270: make class3270 constant
  s390/raw3270: improve raw3270_init() readability
  s390/tape: make tape_class constant
  s390/vmlogrdr: make vmlogrdr_class constant
  s390/vmur: make vmur_class constant
  s390/zcrypt: make zcrypt_class constant
  s390/mm: provide simple ARCH_HAS_DEBUG_VIRTUAL support
  s390/vfio_ccw_cp: use new address translation helpers
  s390/iucv: use new address translation helpers
  s390/ctcm: use new address translation helpers
  s390/lcs: use new address translation helpers
  s390/qeth: use new address translation helpers
  s390/zfcp: use new address translation helpers
  s390/tape: fix virtual vs physical address confusion
  s390/3270: use new address translation helpers
  s390/3215: use new address translation helpers
  ...
2024-03-19 11:38:27 -07:00
David Lechner
2ff0573e7a
spi: docs: spidev: fix echo command format
The two example echo commands for binding the spidev driver were being
rendered as one line in the HTML output. This patch makes use of the
restructured text :: to format the commands as a code block instead
which preserves the line break.

Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://msgid.link/r/20240319183344.2106335-1-dlechner@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2024-03-19 18:37:55 +00:00
Steven Rostedt (Google)
24f5bb9f24 tracing: Just use strcmp() for testing __string() and __assign_str() match
As __assign_str() no longer uses its "src" parameter, there's a check to
make sure nothing depends on it being different than what was passed to
__string(). It originally just compared the pointer passed to __string()
with the pointer passed into __assign_str() via the "src" parameter. But
there's a couple of outliers that just pass in a quoted string constant,
where comparing the pointers is UB to the compiler, as the compiler is
free to create multiple copies of the same string constant.

Instead, just use strcmp(). It may slow down the trace event, but this
will eventually be removed.

Also, fix the issue of passing NULL to strcmp() by adding a WARN_ON() to
make sure that both "src" and the pointer saved in __string() are either
both NULL or have content, and then checking if "src" is not NULL before
performing the strcmp().

Link: https://lore.kernel.org/all/CAHk-=wjxX16kWd=uxG5wzqt=aXoYDf1BgWOKk+qVmAO0zh7sjA@mail.gmail.com/

Fixes: b1afefa62c ("tracing: Use strcmp() in __assign_str() WARN_ON() check")
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2024-03-19 11:23:30 -07:00
Linus Torvalds
fbd88dd057 More power management updates for 6.9-rc1
- Modify the Energy Model code to bail out and complain if the unit of
    power is not uW to prevent errors due to unit mismatches (Lukasz Luba).
 
  - Make the intel_rapl platform driver use a remove callback returning
    void (Uwe Kleine-König).
 
  - Fix typo in the suspend and interrupts document (Saravana Kannan).
 
  - Make per-policy boost flags actually take effect on platforms using
    cpufreq_boost_set_sw() (Sibi Sankar).
 
  - Enable boost support in the SCMI cpufreq driver (Sibi Sankar).
 
  - Make the DT cpufreq driver use zalloc_cpumask_var() for allocating
    cpumasks to avoid using unitinialized memory (Marek Szyprowski).
 -----BEGIN PGP SIGNATURE-----
 
 iQJGBAABCAAwFiEE4fcc61cGeeHD/fCwgsRv/nhiVHEFAmX5iRASHHJqd0Byand5
 c29ja2kubmV0AAoJEILEb/54YlRxof8P/R+MrENvw2bIe5VGwqX99Nd47spbAe2J
 QchuY8R9RIhd4laJ74C+Nc7E1rawLukLHctVql1QzkygldyriAjhHnVeL98Tmh8C
 H+2928BEztPzbIzLMQ7uAVKY+iUD9BfTipPwqV6D118nswtRUbubQkLtrKAmssHQ
 Sm5BqYmEb91CiSIe9wjqCyfc7kq7ina7nqmGa7DgZNMUgCzjmAEDRz1vXV1oRjNl
 aIXpx9X1wtG699HRCXBkxt7SbgXN3bFim6ZFoTvxT4U2Rhcj9JJ/PxKufFL2vuGF
 1M99eu1aMqL0iS3vhj4k88uPG5kDv37qIFYD6Z2vqRVTy040fL+6Sny5IKMlQb+Z
 PUB/TT1rulhH4kCjhkJXuErLqMBG2Ujf8D4drosQK2avp20pF0TCm2h+0LX3HVXM
 dcv+WirjOyljygWm4D0XyvY6U88gcKiGGY/Qf7YQ/GC8Jyrj0h6qMvDw38725XU+
 VQ0JlYCoM1R24dT4iYWWrMbvK6pEQ5R9lwJNSgdtQWOFNmyQy8j8s7D4qyRrCdG/
 JERwNIi+NF3oezg3ahF8s9cemnkndqxlqX1atMmjL9WCbqUPl2LCxJ7TWM5H/mfg
 /h3jNk9ai6d2cHStvoxFzbAYqZX/72IVEteOomKKiHdW7lxWUW+J2xZRy0Pv0163
 iNNyshJAsuaf
 =dlQ/
 -----END PGP SIGNATURE-----

Merge tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm

Pull more power management updates from Rafael Wysocki:
 "These update the Energy Model to make it prevent errors due to power
  unit mismatches, fix a typo in power management documentation, convert
  one driver to using a platform remove callback returning void, address
  two cpufreq issues (one in the core and one in the DT driver), and
  enable boost support in the SCMI cpufreq driver.

  Specifics:

   - Modify the Energy Model code to bail out and complain if the unit
     of power is not uW to prevent errors due to unit mismatches (Lukasz
     Luba)

   - Make the intel_rapl platform driver use a remove callback returning
     void (Uwe Kleine-König)

   - Fix typo in the suspend and interrupts document (Saravana Kannan)

   - Make per-policy boost flags actually take effect on platforms using
     cpufreq_boost_set_sw() (Sibi Sankar)

   - Enable boost support in the SCMI cpufreq driver (Sibi Sankar)

   - Make the DT cpufreq driver use zalloc_cpumask_var() for allocating
     cpumasks to avoid using unitinialized memory (Marek Szyprowski)"

* tag 'pm-6.9-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: scmi: Enable boost support
  firmware: arm_scmi: Add support for marking certain frequencies as turbo
  cpufreq: dt: always allocate zeroed cpumask
  cpufreq: Fix per-policy boost behavior on SoCs using cpufreq_boost_set_sw()
  Documentation: power: Fix typo in suspend and interrupts doc
  PM: EM: Force device drivers to provide power in uW
  powercap: intel_rapl: Convert to platform remove callback returning void
2024-03-19 11:19:36 -07:00