Commit graph

1,031,458 commits

Author SHA1 Message Date
Alex Bee
e1d635bc94 arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
Like some other RK3399 boards RK3399-ROC-PC has an ir receiver
connected to pwm3 which can be used as gpio-ir-receiver.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210619121642.7892-1-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-19 23:49:14 +02:00
Thadeu Lima de Souza Cascardo
d5f9023fa6 can: bcm: delay release of struct bcm_op after synchronize_rcu()
can_rx_register() callbacks may be called concurrently to the call to
can_rx_unregister(). The callbacks and callback data, though, are
protected by RCU and the struct sock reference count.

So the callback data is really attached to the life of sk, meaning
that it should be released on sk_destruct. However, bcm_remove_op()
calls tasklet_kill(), and RCU callbacks may be called under RCU
softirq, so that cannot be used on kernels before the introduction of
HRTIMER_MODE_SOFT.

However, bcm_rx_handler() is called under RCU protection, so after
calling can_rx_unregister(), we may call synchronize_rcu() in order to
wait for any RCU read-side critical sections to finish. That is,
bcm_rx_handler() won't be called anymore for those ops. So, we only
free them, after we do that synchronize_rcu().

Fixes: ffd980f976 ("[CAN]: Add broadcast manager (bcm) protocol")
Link: https://lore.kernel.org/r/20210619161813.2098382-1-cascardo@canonical.com
Cc: linux-stable <stable@vger.kernel.org>
Reported-by: syzbot+0f7e7e5e2f4f40fa89c0@syzkaller.appspotmail.com
Reported-by: Norbert Slusarek <nslusarek@gmx.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Acked-by: Oliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2021-06-19 23:47:32 +02:00
Dan Sneddon
e541845ae0 drm/atmel-hlcdc: Allow async page flips
The driver is capable of doing async page flips so we need to tell the
core to allow them.

Signed-off-by: Dan Sneddon <dan.sneddon@microchip.com>
Tested-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210330151721.6616-1-dan.sneddon@microchip.com
2021-06-19 23:06:56 +02:00
Krzysztof Kozlowski
af42167f53 drm/panel: ld9040: reference spi_device_id table
Reference the spi_device_id table to silence W=1 warning:

  drivers/gpu/drm/panel/panel-samsung-ld9040.c:377:35:
    warning: ‘ld9040_ids’ defined but not used [-Wunused-const-variable=]

This also would be needed for matching the driver if booted without
CONFIG_OF (although it's not necessarily real case).

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210526123002.12913-1-krzysztof.kozlowski@canonical.com
2021-06-19 22:30:23 +02:00
Dan Sneddon
e484028bf3 drm: atmel_hlcdc: Enable the crtc vblank prior to crtc usage.
'commit eec44d44a3 ("drm/atmel: Use drm_atomic_helper_commit")'
removed the home-grown handling of atomic commits and exposed an issue
in the crtc atomic commit handling where vblank is expected to be
enabled but hasn't yet, causing kernel warnings during boot.  This patch
cleans up the crtc vblank handling thus removing the warning on boot.

Fixes: eec44d44a3 ("drm/atmel: Use drm_atomic_helper_commit")

Signed-off-by: Dan Sneddon <dan.sneddon@microchip.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210602160846.5013-1-dan.sneddon@microchip.com
2021-06-19 22:23:03 +02:00
David S. Miller
dda2626b86 Merge branch 'ezchip-fixes'
Pavel Skripkin says:

====================
net: ethernat: ezchip: bug fixing and code improvments

While manual code reviewing, I found some error in ezchip driver.
Two of them looks very dangerous:
  1. use-after-free in nps_enet_remove
      Accessing netdev private data after free_netdev()

  2. wrong error handling of platform_get_irq()
      It can cause passing negative irq to request_irq()

Also, in 2nd patch I removed redundant check to increase execution
speed and make code more straightforward.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-19 11:46:24 -07:00
Pavel Skripkin
0de449d599 net: ethernet: ezchip: fix error handling
As documented at drivers/base/platform.c for platform_get_irq:

 * Gets an IRQ for a platform device and prints an error message if finding the
 * IRQ fails. Device drivers should check the return value for errors so as to
 * not pass a negative integer value to the request_irq() APIs.

So, the driver should check that platform_get_irq() return value
is _negative_, not that it's equal to zero, because -ENXIO (return
value from request_irq() if irq was not found) will
pass this check and it leads to passing negative irq to request_irq()

Fixes: 0dd0770936 ("NET: Add ezchip ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-19 11:46:00 -07:00
Pavel Skripkin
4ae85b23e1 net: ethernet: ezchip: remove redundant check
err varibale will be set everytime, when code gets
into this path. This check will just slowdown the execution
and that's all.

Fixes: 0dd0770936 ("NET: Add ezchip ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-19 11:46:00 -07:00
Pavel Skripkin
e4b8700e07 net: ethernet: ezchip: fix UAF in nps_enet_remove
priv is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing priv
pointer. So, fix it by moving free_netdev() after netif_napi_del()
call.

Fixes: 0dd0770936 ("NET: Add ezchip ethernet driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-19 11:46:00 -07:00
Pavel Skripkin
e3a5de6d81 net: ethernet: aeroflex: fix UAF in greth_of_remove
static int greth_of_remove(struct platform_device *of_dev)
{
...
	struct greth_private *greth = netdev_priv(ndev);
...
	unregister_netdev(ndev);
	free_netdev(ndev);

	of_iounmap(&of_dev->resource[0], greth->regs, resource_size(&of_dev->resource[0]));
...
}

greth is netdev private data, but it is used
after free_netdev(). It can cause use-after-free when accessing greth
pointer. So, fix it by moving free_netdev() after of_iounmap()
call.

Fixes: d4c41139df ("net: Add Aeroflex Gaisler 10/100/1G Ethernet MAC driver")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-19 11:45:10 -07:00
Linus Torvalds
d9403d307d RISC-V Fixes for 5.13-rc7
* A build fix to always build modules with the medany code model, as
   the module loader doesn't support medlow.
 * A Kconfig warning fix for the SiFive errata.
 * A pair of fixes that for regressions to the recent memory layout
   changes.
 * A fix for the FU740 device tree.
 -----BEGIN PGP SIGNATURE-----
 
 iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAmDOEBITHHBhbG1lckBk
 YWJiZWx0LmNvbQAKCRAuExnzX7sYiZhsD/90A+I0pI0MWsjHYbzpSIK/jWKQ6kgY
 Y6HtzZrt31BX3Cq5IshOxsOlHyQkGiu8rHXH2kWPId3WX1bM0q2bSO3EoaTch5/s
 OJ2KKxlp2L758VRaK41ec098QHxjs4Iv1YwnNmcKhCkYvYNV1sq/Vp2RgBXVIoS+
 Jk7sWPN+5CCCcDjKuig+mwZILwHlMsLtm9w61bB4+GWCz3OHKHSIWmPkSfmQT7Sk
 n/KvKrLAonVQxTuBI3syEywy5uHcBooSSNf8kMi8BGwbqmo6CI0CMO9dddeubizK
 ehmColwQWnke3fR02Mt2ATurGeE0epZHTND1ZTyOSCLUSbJecPsAhmGkUkjPoFoH
 wufhc+1+KHAT731/o9KQ4TMt0SQHIZHeMOxIBjnw9evg6pVx5iYistvKmfTvsf/j
 YsRGdrm7//HSZ406Who2qkiTPRYnKJdKpN4wac/XZ/NXN65LL05e5UPxjrH8RShs
 2PpIdyNdfBx7d9VlRkHnNNNF7EFC1S5lg7SkW6CXqOTbfVHRO4szH6OUd6QdD83Y
 MqKRjT2VitnW+tFkX+iYOMEj4bAfFKlmVgjWXUMBJrgnDg6KiZEXCwNbynR/nZA+
 8ssbJqQ2oDZsR/G4s+ePzrNz8Pd2R/9gfmnx1nY016p3JJ/dvX8pBzjQN/X9r8SS
 3dKmB8XZ9i/LUA==
 =HsNS
 -----END PGP SIGNATURE-----

Merge tag 'riscv-for-linus-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux

Pull RISC-V fixes from Palmer Dabbelt:

 - A build fix to always build modules with the 'medany' code model, as
   the module loader doesn't support 'medlow'.

 - A Kconfig warning fix for the SiFive errata.

 - A pair of fixes that for regressions to the recent memory layout
   changes.

 - A fix for the FU740 device tree.

* tag 'riscv-for-linus-5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: dts: fu740: fix cache-controller interrupts
  riscv: Ensure BPF_JIT_REGION_START aligned with PMD size
  riscv: kasan: Fix MODULES_VADDR evaluation due to local variables' name
  riscv: sifive: fix Kconfig errata warning
  riscv32: Use medany C model for modules
2021-06-19 08:45:34 -07:00
Linus Torvalds
e14c779ade - Fix zcrypt ioctl hang due to AP queue msg counter dropping below 0 when
pending requests are purged.
 
 - Two fixes for the machine check handler in the entry code.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmDNvpgACgkQjYWKoQLX
 FBiuvQf/VrYPeFQotoit8ZQm5EUUMHeryxp3DVOeHFilPdANbVh1Q++NxZvf2XSw
 ejDUwTBuWaMmb2U8/7Yp+dbLYRu6XGKVKHLIArkXzsDzUNaJ+tMszAVKDK+SRHYe
 zaBYMG6Lfn/ByoME1rqQZ6e/dx+4f0rzorR5A8IlslsSFFyTzt8CSLnrDcu6aj4i
 bGSf8lS7dMoy49OYzuNYaPl2KcPEyrWMB//vuwj5jDru3eJcqW/m/q/7JRskTicm
 YsRw0x2waDs2x+SOQJ+haSrNRGY9YKSVUISVgDPX0Yz4PF9noNq1iOCRfu5JcrcR
 vlm3rJI8uFdZ8p4ZUMJHMS7T7Z5bRg==
 =GRT1
 -----END PGP SIGNATURE-----

Merge tag 's390-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux

Pull s390 fixes from Vasily Gorbik:

 - Fix zcrypt ioctl hang due to AP queue msg counter dropping below 0
   when pending requests are purged.

 - Two fixes for the machine check handler in the entry code.

* tag 's390-5.13-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  s390/ap: Fix hanging ioctl caused by wrong msg counter
  s390/mcck: fix invalid KVM guest condition check
  s390/mcck: fix calculation of SIE critical section size
2021-06-19 08:39:13 -07:00
Arnaldo Carvalho de Melo
1792a59eab tools headers UAPI: Sync linux/in.h copy with the kernel sources
To pick the changes in:

  3218274773 ("icmp: don't send out ICMP messages with a source address of 0.0.0.0")

That don't result in any change in tooling, as INADDR_ are not used to
generate id->string tables used by 'perf trace'.

This addresses this build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/linux/in.h' differs from latest version at 'include/uapi/linux/in.h'
  diff -u tools/include/uapi/linux/in.h include/uapi/linux/in.h

Cc: David S. Miller <davem@davemloft.net>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-19 10:15:22 -03:00
Arnaldo Carvalho de Melo
17d27fc314 tools headers UAPI: Sync asm-generic/unistd.h with the kernel original
To pick the changes in:

  8b1462b67f ("quota: finish disable quotactl_path syscall")

Those headers are used in some arches to generate the syscall table used
in 'perf trace' to translate syscall numbers into strings.

This addresses this perf build warning:

  Warning: Kernel ABI header at 'tools/include/uapi/asm-generic/unistd.h' differs from latest version at 'include/uapi/asm-generic/unistd.h'
  diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h

Cc: Jan Kara <jack@suse.cz>
Cc: Marcin Juszkiewicz <marcin@juszkiewicz.com.pl>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-19 10:12:30 -03:00
Arnaldo Carvalho de Melo
ef83f9efe8 perf beauty: Update copy of linux/socket.h with the kernel sources
To pick the changes in:

  ea6932d70e ("net: make get_net_ns return error if NET_NS is disabled")

That don't result in any changes in the tables generated from that
header.

This silences this perf build warning:

  Warning: Kernel ABI header at 'tools/perf/trace/beauty/include/linux/socket.h' differs from latest version at 'include/linux/socket.h'
  diff -u tools/perf/trace/beauty/include/linux/socket.h include/linux/socket.h

Cc: Changbin Du <changbin.du@intel.com>
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-19 10:09:08 -03:00
Ian Rogers
482698c2f8 perf test: Fix non-bash issue with stat bpf counters
$(( .. )) is a bash feature but the test's interpreter is !/bin/sh,
switch the code to use expr.

Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: bpf@vger.kernel.org
Link: http://lore.kernel.org/lkml/20210617184216.2075588-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-19 10:06:46 -03:00
Riccardo Mancini
c087e9480c perf machine: Fix refcount usage when processing PERF_RECORD_KSYMBOL
ASan reported a memory leak of BPF-related ksymbols map and dso. The
leak is caused by refount never reaching 0, due to missing __put calls
in the function machine__process_ksymbol_register.

Once the dso is inserted in the map, dso__put() should be called
(map__new2() increases the refcount to 2).

The same thing applies for the map when it's inserted into maps
(maps__insert() increases the refcount to 2).

  $ sudo ./perf record -- sleep 5
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]

  =================================================================
  ==297735==ERROR: LeakSanitizer: detected memory leaks

  Direct leak of 6992 byte(s) in 19 object(s) allocated from:
      #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
      #1 0x8e4e53 in map__new2 /home/user/linux/tools/perf/util/map.c:216:20
      #2 0x8cf68c in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:778:10
      [...]

  Indirect leak of 8702 byte(s) in 19 object(s) allocated from:
      #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
      #1 0x8728d7 in dso__new_id /home/user/linux/tools/perf/util/dso.c:1256:20
      #2 0x872015 in dso__new /home/user/linux/tools/perf/util/dso.c:1295:9
      #3 0x8cf623 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:774:21
      [...]

  Indirect leak of 1520 byte(s) in 19 object(s) allocated from:
      #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
      #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
      #2 0x888954 in map__process_kallsym_symbol /home/user/linux/tools/perf/util/symbol.c:710:8
      [...]

  Indirect leak of 1406 byte(s) in 19 object(s) allocated from:
      #0 0x4f43c7 in calloc (/home/user/linux/tools/perf/perf+0x4f43c7)
      #1 0x87b3da in symbol__new /home/user/linux/tools/perf/util/symbol.c:269:23
      #2 0x8cfbd8 in machine__process_ksymbol_register /home/user/linux/tools/perf/util/machine.c:803:8
      [...]

Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Tommi Rantala <tommi.t.rantala@nokia.com>
Link: http://lore.kernel.org/lkml/20210612173751.188582-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-19 10:06:46 -03:00
John Garry
fe7a98b9d9 perf metricgroup: Return error code from metricgroup__add_metric_sys_event_iter()
The error code is not set at all in the sys event iter function.

This may lead to an uninitialized value of "ret" in
metricgroup__add_metric() when no CPU metric is added.

Fix by properly setting the error code.

It is not necessary to init "ret" to 0 in metricgroup__add_metric(), as
if we have no CPU or sys event metric matching, then "has_match" should
be 0 and "ret" is set to -EINVAL.

However gcc cannot detect that it may not have been set after the
map_for_each_metric() loop for CPU metrics, which is strange.

Fixes: be335ec28e ("perf metricgroup: Support adding metrics for system PMUs")
Signed-off-by: John Garry <john.garry@huawei.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1623335580-187317-3-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-19 10:06:46 -03:00
John Garry
fc96ec4d5d perf metricgroup: Fix find_evsel_group() event selector
The following command segfaults on my x86 broadwell:

  $ ./perf stat  -M frontend_bound,retiring,backend_bound,bad_speculation sleep 1
  WARNING: grouped events cpus do not match, disabling group:
    anon group { raw 0x10e }
    anon group { raw 0x10e }
  perf: util/evsel.c:1596: get_group_fd: Assertion `!(!leader->core.fd)' failed.
  Aborted (core dumped)

The issue shows itself as a use-after-free in evlist__check_cpu_maps(),
whereby the leader of an event selector (evsel) has been deleted (yet we
still attempt to verify for an evsel).

Fundamentally the problem comes from metricgroup__setup_events() ->
find_evsel_group(), and has developed from the previous fix attempt in
commit 9c880c24cb ("perf metricgroup: Fix for metrics containing
duration_time").

The problem now is that the logic in checking if an evsel is in the same
group is subtly broken for the "cycles" event. For the "cycles" event,
the pmu_name is NULL; however the logic in find_evsel_group() may set an
event matched against "cycles" as used, when it should not be.

This leads to a condition where an evsel is set, yet its leader is not.

Fix the check for evsel pmu_name by not matching evsels when either has a
NULL pmu_name.

There is still a pre-existing metric issue whereby the ordering of the
metrics may break the 'stat' function, as discussed at:
https://lore.kernel.org/lkml/49c6fccb-b716-1bf0-18a6-cace1cdb66b9@huawei.com/

Fixes: 9c880c24cb ("perf metricgroup: Fix for metrics containing duration_time")
Signed-off-by: John Garry <john.garry@huawei.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> # On a Thinkpad T450S
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/1623335580-187317-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-06-19 10:06:46 -03:00
Dmitry Osipenko
4c7f85a321 hwmon: (lm90) Disable interrupt on suspend
I2C accesses are prohibited and will error out after suspending of the
I2C controller, hence we need to ensure that interrupt won't fire on
suspend when it's too late. Disable interrupt across suspend/resume.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19 04:09:49 -07:00
Dmitry Osipenko
2abdc357c5 hwmon: (lm90) Unmask hardware interrupt
The ALERT interrupt is enabled by default after power-on, but it could
be masked by bootloader. For example this is the case on Acer A500 tablet
device. Unmask the hardware interrupt if interrupt is provided.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19 04:09:49 -07:00
Dmitry Osipenko
94dbd23ed8 hwmon: (lm90) Use hwmon_notify_event()
Use hwmon_notify_event() to notify userspace and thermal core about
temperature changes.

Suggested-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19 04:09:49 -07:00
Dmitry Osipenko
d97fb837b8 hwmon: (lm90) Don't override interrupt trigger type
The lm90 driver sets interrupt trigger type to level-low. This type is
not suitable for sensors like NCT1008 that don't deassert interrupt line
until temperature is back to normal, resulting in interrupt storm. The
appropriate trigger type should come from OF device description and
currently it's overridden by the driver's trigger type. Don't specify
the trigger type in the driver code, letting interrupt core to use the
device-specific trigger type.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2021-06-19 04:09:49 -07:00
Anilkumar Kolli
49f5b114e3 ath11k: Enable QCN9074 device
The issues mentioned in commit 4e80946197
("ath11k: add qcn9074 pci device support") are fixed in firmware.
This patch enables QCN9074 device.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.4.0.1-01838-QCAHKSWPL_SILICONZ-1

Signed-off-by: Anilkumar Kolli <akolli@codeaurora.org>
Signed-off-by: Jouni Malinen <jouni@codeaurora.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210615211348.92168-1-jouni@codeaurora.org
2021-06-19 12:15:11 +03:00
Caleb Connolly
8a952a955d ath10k: demote chan info without scan request warning
Some devices/firmwares cause this to be printed every 5-15 seconds,
though it has no impact on functionality. Demote this to a debug
message.

I see this on SDM845 and MSM8998 platforms, specifically the OnePlus 6 devices,
PocoPhone F1 and OnePlus 5.  On the OnePlus 6 (SDM845) we are stuck with the
following signed vendor fw:

[    9.339873] ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40030001
[    9.339897] ath10k_snoc 18800000.wifi: qmi fw_version 0x20060029 fw_build_timestamp 2019-07-12 02:14 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.2.0.c8-00041-QCAHLSWMTPLZ-1

The OnePlus 5 (MSM8998) is using firmware:

[ 6096.956799] ath10k_snoc 18800000.wifi: qmi chip_id 0x30214 chip_family 0x4001 board_id 0xff soc_id 0x40010002
[ 6096.956824] ath10k_snoc 18800000.wifi: qmi fw_version 0x1007007e fw_build_timestamp 2020-04-14 22:45 fw_build_id QC_IMAGE_VERSION_STRING=WLAN.HL.1.0.c6-00126-QCAHLSWMTPLZ-1.211883.1.278648.

Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.2.0.c8-00041-QCAHLSWMTPLZ-1
Tested-on: WCN3990 hw1.0 SNOC WLAN.HL.1.0.c6-00126-QCAHLSWMTPLZ-1.211883.1.278648

Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210522171609.299611-1-caleb@connolly.tech
2021-06-19 12:12:42 +03:00
Íñigo Huguet
adf6a0f8c0 rtl8xxxu: avoid parsing short RX packet
One USB data buffer can contain multiple received network
packets. If that's the case, they're processed this way:
1. Original buffer is cloned
2. Original buffer is trimmed to contain only the first
   network packet
3. This first network packet is passed to network stack
4. Cloned buffer is trimmed to eliminate the first network
   packet
5. Repeat with the cloned buffer until there are no more
   network packets inside

However, if the space remaining in original buffer after
the first network packet is not enough to contain at least
another network packet descriptor, it is not cloned.

The loop parsing this packets ended if remaining space == 0.
But if the remaining space was > 0 but < packet descriptor
size, another iteration of the loop was done, processing again
the previous packet because cloning didn't happen. Moreover,
the ownership of this packet had been passed to network
stack in the previous iteration.

This patch ensures that no extra iteration is done if the
remaining size is not enough for one packet, and also avoid
the first iteration for the same reason.

Probably this doesn't happen in practice, but can happen
theoretically.

Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210511071926.8951-1-ihuguet@redhat.com
2021-06-19 12:06:09 +03:00
Pascal Terjan
c240b044ed rtl8xxxu: Fix device info for RTL8192EU devices
Based on 2001:3319 and 2357:0109 which I used to test the fix and
0bda:818b and 2357:0108 for which I found efuse dumps online.

== 2357:0109 ==
=== Before ===
Vendor: Realtek
Product: \x03802.11n NI
Serial:
=== After ===
Vendor: Realtek
Product: 802.11n NIC
Serial not available.

== 2001:3319 ==
=== Before ===
Vendor: Realtek
Product: Wireless N
Serial: no USB Adap
=== After ===
Vendor: Realtek
Product: Wireless N Nano USB Adapter
Serial not available.

Signed-off-by: Pascal Terjan <pterjan@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210424172959.1559890-1-pterjan@google.com
2021-06-19 12:05:40 +03:00
Kalle Valo
b566b2e82f mt76 patches for 5.14
* mt7915 MSI support
 * disable ASPM on mt7915
 * mt7915 tx status reporting
 * mt7921 decap offload
 * driver fixes
 * cleanups
 * mt7921 runtime power management improvements
 * testmode improvements/fixes
 * runtime PM improvements
 -----BEGIN PGP SIGNATURE-----
 Comment: GPGTools - http://gpgtools.org
 
 iEYEABECAAYFAmDNnMEACgkQ130UHQKnbvUGEACdHg0TQidekjalBu06D6x3GxwX
 SuMAoKGTis/G8jtocXshvu0VKqUrurfd
 =3ADP
 -----END PGP SIGNATURE-----

Merge tag 'mt76-for-kvalo-2021-06-18' of https://github.com/nbd168/wireless into pending

mt76 patches for 5.14

* mt7915 MSI support
* disable ASPM on mt7915
* mt7915 tx status reporting
* mt7921 decap offload
* driver fixes
* cleanups
* mt7921 runtime power management improvements
* testmode improvements/fixes
* runtime PM improvements
2021-06-19 11:49:26 +03:00
Peter Robinson
a406bfda89 arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
Add the initial details for the USB-C port.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210613215237.830160-4-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-19 10:44:51 +02:00
Peter Robinson
5768c5ff07 arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
Sort the rk3399 firefly pinmux entries in alphabetical
order and de-dupe the pmic entries.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210613215237.830160-3-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-19 10:43:57 +02:00
Peter Robinson
4fab8e3655 arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
This adds the RK3399 Firefly’s infrared receiver to its dts.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210613215237.830160-2-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-19 10:43:57 +02:00
Peter Robinson
ba2401ab87 arm64: dts: rockchip: add SPDIF node for rk3399-firefly
This patch adds the SPDIF sound node and related settings
for rk3399-firefly.

Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Link: https://lore.kernel.org/r/20210613215237.830160-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-19 10:43:57 +02:00
Chris Morgan
edb39de5d7 arm64: dts: rockchip: Add Rotation Property for OGA Panel
Add rotation property for Odroid Go Advance panel to note that it is
rotated 270 degrees. Rotation affects DRM connector after this patch:

https://cgit.freedesktop.org/drm/drm/commit/drivers/gpu/drm/panel/panel-elida-kd35t133.c?id=610d9c311b1387f8c4ac602fee1f2a1cb0508707

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20210614161849.332-1-macroalpha82@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-19 10:37:47 +02:00
Wan Jiabing
1aee020155 um: remove unneeded semicolon in um_arch.c
Fix following coccicheck warning:
./arch/um/kernel/um_arch.c:284:34-35: Unneeded semicolon

Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Richard Weinberger <richard@nod.at>
2021-06-19 10:02:50 +02:00
Lorenzo Bianconi
61a1f99dd1 mt76: mt7921: allow chip reset during device restart
Disable chip full reset just during device probing but allow
it during hw restart.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:52 +02:00
Lorenzo Bianconi
a27238a048 mt76: mt7615: set macwork timeout according to runtime-pm
Set macwork timeout value according to runtime-pm in order to reduce
power consumption

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Lorenzo Bianconi
8aff2d915d mt76: mt7663s: enable runtime-pm
Allow the user to enable runtime-pm for mt7663s driver

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Lorenzo Bianconi
c2f9e631f0 mt76: mt7663s: rely on mt76_connac_pm_ref/mt76_connac_pm_unref in tx path
Similar to mt7663e, rely on mt76_connac_pm_ref/mt76_connac_pm_unref to
check PM state and increment/decrement wake counter

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Lorenzo Bianconi
50a97efe21 mt76: mt7663s: rely on pm reference counting
As already done for mt7921 and mt7663e, rely on pm reference counting in
drv/fw_own

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Lorenzo Bianconi
aac5104bf6 mt76: sdio: do not run mt76_txq_schedule directly
In order to support runtime-pm for sdio, do not run mt76_txq_schedule
directly, but schedule tx_worker instead

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Deren Wu
1153668eef mt76: mt7921: enable HE BFee capability
Enables HE MU/SU beamformee functionality

Signed-off-by: Eric-SY Chang <Eric-SY.Chang@mediatek.com>
Signed-off-by: Deren Wu <deren.wu@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Lorenzo Bianconi
5512c97443 mt76: disable TWT capabilities for the moment
Disable TWT REQ/RES mac capabilities since TWT is not supported
yet in mt7915/mt7921.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Ryder Lee
c368362c36 mt76: fix iv and CCMP header insertion
The iv from RXD is only for TKIP_RSC/CCMP_PN/GCMP_PN, and it needs a
check for CCMP header insertion. Move mt76_cipher_type to mt76.h to
reduce duplicated code.

Signed-off-by: Xing Song <xing.song@mediatek.com>
Signed-off-by: Ryder Lee <ryder.lee@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Sean Wang
723885a675 mt76: mt7921: fix the coredump is being truncated
Fix the maximum size of the coredump generated with current mt7921
firmware. Otherwise, a truncated coredump would be reported to userland
via dev_coredumpv.

Also, there is an additional error handling enhanced in the patch to avoid
the possible invalid buffer access when the system failed to create the
buffer to hold the coredump.

Fixes: 0da3c795d0 ("mt76: mt7921: add coredump support")
Co-developed-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: YN Chen <YN.Chen@mediatek.com>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Sean Wang
78b0328ff8 mt76: mt7921: fix kernel warning when reset on vif is not sta
ieee80211_disconnect is only called for the staton mode.

[  714.050429] WARNING: CPU: 1 PID: 382 at net/mac80211/mlme.c:2787
ieee80211_disconnect+0x108/0x118 [mac80211]
[  714.116704] Hardware name: MediaTek Asurada rev1 board (DT)
[  714.122303] Workqueue: mt76 mt7921_mac_reset_work [mt7921e]
[  714.127877] pstate: 20c00009 (nzCv daif +PAN +UAO)
[  714.132761] pc : ieee80211_disconnect+0x108/0x118 [mac80211]
[  714.138430] lr : mt7921_vif_connect_iter+0x28/0x54 [mt7921e]
[  714.144083] sp : ffffffc0107cbbd0
[  714.147394] x29: ffffffc0107cbbd0 x28: ffffffb26c9cb928
[  714.152706] x27: ffffffb26c9cbd98 x26: 0000000000000000
[  714.158017] x25: 0000000000000003 x24: ffffffb26c9c9c38
[  714.163328] x23: ffffffb26c9c9c38 x22: ffffffb26c9c8860
[  714.168639] x21: ffffffb23b940000 x20: ffffffb26c9c8860
[  714.173950] x19: 0000000000000001 x18: 000000000000b67e
[  714.179261] x17: 00000000064dd409 x16: ffffffd739cb28f0
[  714.184571] x15: 0000000000000000 x14: 0000000000000227
[  714.189881] x13: 0000000000000400 x12: ffffffd73a4eb060
[  714.195191] x11: 0000000000000000 x10: 0000000000000000
[  714.200502] x9 : ffffffd703a0a000 x8 : 0000000000000006
[  714.205812] x7 : 2828282828282828 x6 : ffffffb200440396
[  714.211122] x5 : 0000000000000000 x4 : 0000000000000004
[  714.216432] x3 : 0000000000000000 x2 : ffffffb23b940c90
[  714.221743] x1 : 0000000000000001 x0 : ffffffb23b940c90
[  714.227054] Call trace:
[  714.229594]  ieee80211_disconnect+0x108/0x118 [mac80211]
[  714.234913]  mt7921_vif_connect_iter+0x28/0x54 [mt7921e]
[  714.240313]  __iterate_interfaces+0xc4/0xdc [mac80211]
[  714.245541]  ieee80211_iterate_interfaces+0x4c/0x68 [mac80211]
[  714.251381]  mt7921_mac_reset_work+0x410/0x468 [mt7921e]
[  714.256696]  process_one_work+0x208/0x3c8
[  714.260706]  worker_thread+0x23c/0x3e8
[  714.264456]  kthread+0x140/0x17c
[  714.267685]  ret_from_fork+0x10/0x18

Fixes: 0c1ce98846 ("mt76: mt7921: add wifi reset support")
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:51 +02:00
Lorenzo Bianconi
495cd981af mt76: mt7921: introduce dedicated control for deep_sleep
Introduce ds_enable switch to fully control fw deep_sleep capability

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:50 +02:00
Lorenzo Bianconi
8225816d29 mt76: mt7921: limit txpower according to userlevel power
Limit tx power for single-sku according to userlevel power.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:50 +02:00
Lorenzo Bianconi
e5bca8c5d2 mt76: mt7921: improve code readability for mt7921_update_txs
Introduce mt7921_update_txs routine in order to improve code readability
for tx timestamp parsing/configuration.

Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:50 +02:00
Sean Wang
aa967eb791 mt76: mt7921: add deep sleep control to runtime-pm knob
Add addtional the deep sleep control to runtime-pm knob to
allow us to control driver switching between the full power
mode and the deep sleep mode the firmware is able to support.

Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:50 +02:00
Sean Wang
f5056657f9 mt76: mt7921: enable deep sleep at runtime
Enable the deep sleep mode with that firmware is able to trap into
the doze state at runtime to reduce the power consumption further.

The deep sleep mode is not allowed in the STA state transition with
the firmware to have the fast connection experience as we've done in
the full power mode

Reviewed-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2021-06-19 09:22:50 +02:00