Commit graph

1,031,458 commits

Author SHA1 Message Date
Ohad Sharabi
4cb4508c86 habanalabs: track security status using positive logic
Using negative logic (i.e. fw_security_disabled) is confusing.

Modify the flag to use positive logic (fw_security_enabled).

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Koby Elbaz
4080308e33 habanalabs/gaudi: use COMMS to reset device / halt CPU
This is needed because legacy FW 'communication' protocol will soon
become obsolete.
Because COMMS is a boot protocol, communicating through it is supported
only until Linux is loaded to the device CPU, where in that case we
will fallback to the former implementation.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Koby Elbaz
3649eaea27 habanalabs/gaudi: disable GIC usage if security is enabled
Security is set based on PCI ID, and after reading preboot status bits.
GIC usage is set in both scenarios since GIC can't be used when security
is enabled.
Moreover, writing to GIC/SP is enabled only after Linux is fully loaded.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Koby Elbaz
7feffb6815 habanalabs: read preboot status bits in an earlier stage
On newer releases, host won't be able to trigger an interrupt directly
to the ASIC GIC controller.
To be able to decide whether GIC can/not be used, we must read device's
preboot status bits in a stage that precedes the possible first use of
GIC (when device is in dirty state).

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Oded Gabbay
1242e9f0f4 habanalabs: check running index in eqe control
To harden the event queue mechanism, we add a running index to the
control header of the entry.

The firmware writes the index in each entry and the driver verifies
that the index of the current entry is larger by 1 of the index of
the previous entry.

In case it isn't, the driver will treat the entry as if it wasn't
valid (it won't process it but won't skip it).

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Oded Gabbay
7fb2a1f5b7 habanalabs: set memory scrubbing to disabled by default
Scrubbing memory after every unmap is very costly in terms of
performance. If a user wants it he can enable it but the default
should prioritize performance.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Ofir Bitton
1dae12fe1b habanalabs/gaudi: do not move HBM bar if iATU done by FW
As iATU configuration is done by FW, driver should not try and
move HBM bar.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Koby Elbaz
e591a49cb5 habanalabs/gaudi: read GIC sts after FW is loaded
Reading of GIC privileged status will be done after F/W is loaded,
because privileged GIC capability is only available with the correct
ARMCP version, and after it's loaded.
Such versions necessarily support COMMS, so GIC alternatives (SP regs)
will be read directly from dynamic regs.

As well, initiation of DMA QMANs will occur after F/W is loaded
since it depends on GIC configuration.

In case F/W isn't loaded there's no problem since either way
there won't be any GIC IRQ handling.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Ohad Sharabi
190ec49710 habanalabs: check if asic secured with asic type
Fix issue in which the input to the function is_asic_secured was device
PCI_IDS number instead of the asic_type enumeration.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Koby Elbaz
3e0ca9fab1 habanalabs/gaudi: send hard reset cause to preboot
LKD should provide hard reset cause to preboot prior to
loading any FW components (in case needed).
Current implementation is based on the new FW 'COMMS' protocol
In cased 'COMMS' is disabled - reset cause won't be sent.
Currently, only 2 reset causes are shared: HEARTBEAT & TDR.

Sending the reset cause will provide the missing watchdog
info that the firmware needs to provide to the BMC.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Oded Gabbay
a782422b20 habanalabs: notify before f/w loading
An information print notifying on starting to load the f/w was removed
by mistake when moving to the new dynamic f/w loading mechanism.

Restore that print as the F/W loading usually takes between 10 to 20
seconds and this print helps the user know the status of the driver
load.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:40 +03:00
Koby Elbaz
8121736bbf habanalabs/gaudi: use scratchpad regs instead of GIC controller
Due to new security restrictions, GIC controller can no
longer be accessed from user/kernel.
To monitor that, a new status bit will be read from preboot
caps, indicating whether direct access to GIC is blocked.

In case it is blocked, driver will use scratchpad registers
instead of using GIC interface on two main scenarios:
The first of which LKD triggers interrupts to F/W through GIC,
and the second of when LKD configures all engines/QMANs
to write to GIC when they want to report an error.

From F/W perspective, it will poll on all SPs, and once IRQ
number is retrieved, SP register is cleared, and it will perform the
write to the GIC to trigger the IRQ handler.

Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Ohad Sharabi
e67a60400f habanalabs: read f/w's 2-nd sts and err registers
Maintain both STS1 and ERR1 registers used for status communication
with F/W.
Those are not maintained as we currently have less than 31
statuses/error defined and so LKD did not refer to those register.
The reason to read them now is to try to support future f/w versions
with current driver.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Ohad Sharabi
ea7d5e7b10 habanalabs: avoid using uninitialized pointer
When attempting to read FW component's version we should break if input
FW component is invalid in order to avoid using uninitialized
destination pointer.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Ohad Sharabi
6542c3541d habanalabs: set dma mask from fw once fw done iatu config
When setting "DMA mask from FW" we are reading PSOC_GLOBAL_CONF register
which is allowed only once FW has done it's iATU configuration.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Oded Gabbay
c07c54e9de habanalabs: better error print for pin failure
Print the user given pointer and error code on failure to get user
pages for easier debugging.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Omer Shpigelman
3f18b8421f habanalabs: add missing space after casting
Change casting code according to kernel coding style.

Signed-off-by: Omer Shpigelman <oshpigelman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Oded Gabbay
7693f5d39e habanalabs: ignore device unusable status
Some users might want to implement their own policy of when the device
is unusable so we need to ignore this status in the driver and continue
loading as normal.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Ohad Sharabi
b31e59bc55 habanalabs: load linux image to device
Implementing dynamic linux image load to the device.
This patch also implements the FW communication steps during the
boot-fit.
This patch also enables the dynamic protocol based on the compatibility
flag.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Ohad Sharabi
8a43c83fec habanalabs: load boot fit to device
Implementing dynamic boot fit image load to the device.
Note that some necessary adjustment were added to the static loader as
well so that both loaders can co-exist.
as this is not the final FW load stage the dynamic FW load is still
forced to be non functional.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Oded Gabbay
b8e785c559 habanalabs: use dev_dbg upon hint address failure
Hint address failure that results in a valid mapping with an address
that was allocated by the driver is not a real failure.

Therefore, the driver shouldn't notify about this in kernel log. The
user is responsible to check the returned address.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Guy Nisan
a5d4f2e92f habanalabs: modify progress status messages
Indicate "progress" instead of "error" when reporting progress status.

Change "u-boot stopped by user" to "Cannot boot" message as
CPU_BOOT_STATUS_UBOOT_NOT_READY may indicate a fatal error that prevent
u-boot from loading firmware.

Signed-off-by: Guy Nisan <gnisan@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Ofir Bitton
38fbcc6ec9 habanalabs: give FW a grace time for configuring iATU
iATU (internal Address Translation Unit of the PCI controller)
configuration is being done by FW right after driver enables
the PCI device. Hence, driver must add a minor sleep afterwards
in order to make sure FW finishes configuring iATU regions.

Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Oded Gabbay
90bd4798a8 habanalabs: update to latest f/w headers
Update the common and GAUDI firmware header files to the latest version.

The latest version use the correct endianness types so this commit also
contains minor changes to the code to use the correct conversions when
reading/writing to the firmware structures.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Ohad Sharabi
c592c270fe habanalabs: expose ASIC specific PCI info to common code
LKD has interfaces in which it receives device address.
For instance the debugfs_read/write variants receives device address for
CFG/SRAM/DRAM for read/write and need to translate to the mapped PCI BAR
address.

In addition, the dynamic FW load protocol dictates that the address to
which the LKD will copy the image for the next FW component will be
received as a device address and can be placed either in SRAM or DRAM.

We need to distinguish those regions as the access methods to those
regions are different (in DRAM we possibly need to set the BAR base).

Looking forward this code will be used to remove duplicated code in the
debugfs_read/write that search the memory region for the input device
address.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Ohad Sharabi
22a795b4af habanalabs: dynamic fw load reset protocol
First stage of the dynamic FW load protocol is to reset the protocol to
avoid residues from former load cycles.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:39 +03:00
Ohad Sharabi
50f036df47 habanalabs: use common fw_version read
Instead of using multiple ASIC specific copies of functions to read the
FW version use single common one that gets ASIC specific arguments.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:38 +03:00
Alon Mizrahi
08c03a1966 habanalabs: use mmu cache range invalidation
Use mmu cache range invalidation instead of entire cache invalidation
because it yields better performance.

In GOYA and GAUDI, always use entire cache invalidation because these
ASICs don't support range invalidation.

Signed-off-by: Alon Mizrahi <amizrahi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:38 +03:00
Ohad Sharabi
a22f0ec073 habanalabs: refactor init device cpu code
Replace multiple arguments to init device CPU function by passing
firmware loader managing structure that is initialized per ASIC with
the loader parameters.

In addition, the FW loader management structure is now part of the
habanalabs device, this way the loader parameters will be able to be
communicated across various boot stages.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:38 +03:00
Ohad Sharabi
364690429a habanalabs: request f/w in separate function
This refactor is needed due to the dynamic FW load in which requesting
the FW file (and getting its attributes) is not immediately followed by
copying FW file content.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:38 +03:00
Ohad Sharabi
6e16ab6c32 habanalabs: prepare preboot stage to dynamic f/w load
Start the skeleton for the dynamic F/W load by marking current preboot
code path as legacy.

Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:38 +03:00
Oded Gabbay
3b39840083 habanalabs: update firmware files to latest
Update the firmware files to the latest from the firmware team.

Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:38 +03:00
Moti Haimovski
7bd1e23e5f habanalabs: increase ELBI reset timeout for PLDM
On PLDM, in case of NIC hangs, the ELBI reset to take much longer than
expected. As a result an increase in the ELBI reset timeout is required.

Signed-off-by: Moti Haimovski <mhaimovski@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
2021-06-18 15:23:38 +03:00
Wei Yongjun
45ce213392
ASoC: rk817: Constify static struct snd_soc_dai_ops
The snd_soc_dai_ops structures is only stored in the ops field of a
snd_soc_dai_driver structure, so make the snd_soc_dai_ops structure
const to allow the compiler to put it in read-only memory.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20210602113643.3037374-1-weiyongjun1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-18 12:55:20 +01:00
Flavio Suligoi
eb1e9b8f58
ASoC: fsi: fix spelling mistake
Fix "thse" --> "these" in struct fsi_stream declaration.

Signed-off-by: Flavio Suligoi <f.suligoi@asem.it>
Link: https://lore.kernel.org/r/20210618085324.1038524-1-f.suligoi@asem.it
Signed-off-by: Mark Brown <broonie@kernel.org>
2021-06-18 12:55:19 +01:00
Marc Zyngier
b88835a89d Merge branch kvm-arm64/mmu/stage2-cmos into kvmarm-master/next
Cache maintenance updates from Yanan Wang, moving the CMOs
down into the page-table code. This ensures that we only issue
them when actually performing a mapping rather than upfront.

* kvm-arm64/mmu/stage2-cmos:
  KVM: arm64: Move guest CMOs to the fault handlers
  KVM: arm64: Tweak parameters of guest cache maintenance functions
  KVM: arm64: Introduce mm_ops member for structure stage2_attr_data
  KVM: arm64: Introduce two cache maintenance callbacks
2021-06-18 12:36:30 +01:00
Yanan Wang
25aa28691b KVM: arm64: Move guest CMOs to the fault handlers
We currently uniformly perform CMOs of D-cache and I-cache in function
user_mem_abort before calling the fault handlers. If we get concurrent
guest faults(e.g. translation faults, permission faults) or some really
unnecessary guest faults caused by BBM, CMOs for the first vcpu are
necessary while the others later are not.

By moving CMOs to the fault handlers, we can easily identify conditions
where they are really needed and avoid the unnecessary ones. As it's a
time consuming process to perform CMOs especially when flushing a block
range, so this solution reduces much load of kvm and improve efficiency
of the stage-2 page table code.

We can imagine two specific scenarios which will gain much benefit:
1) In a normal VM startup, this solution will improve the efficiency of
handling guest page faults incurred by vCPUs, when initially populating
stage-2 page tables.
2) After live migration, the heavy workload will be resumed on the
destination VM, however all the stage-2 page tables need to be rebuilt
at the moment. So this solution will ease the performance drop during
resuming stage.

Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210617105824.31752-5-wangyanan55@huawei.com
2021-06-18 12:35:35 +01:00
Yanan Wang
378e6a9c78 KVM: arm64: Tweak parameters of guest cache maintenance functions
Adjust the parameter "kvm_pfn_t pfn" of __clean_dcache_guest_page
and __invalidate_icache_guest_page to "void *va", which paves the
way for converting these two guest CMO functions into callbacks in
structure kvm_pgtable_mm_ops. No functional change.

Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210617105824.31752-4-wangyanan55@huawei.com
2021-06-18 12:35:35 +01:00
Yanan Wang
a4d5ca5c7c KVM: arm64: Introduce mm_ops member for structure stage2_attr_data
Also add a mm_ops member for structure stage2_attr_data, since we
will move I-cache maintenance for guest stage-2 to the permission
path and as a result will need mm_ops for some callbacks.

Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210617105824.31752-3-wangyanan55@huawei.com
2021-06-18 12:35:35 +01:00
Yanan Wang
6204004de3 KVM: arm64: Introduce two cache maintenance callbacks
To prepare for performing CMOs for guest stage-2 in the fault handlers
in pgtable.c, here introduce two cache maintenance callbacks in struct
kvm_pgtable_mm_ops. We also adjust the comment alignment for the
existing part but make no real content change at all.

Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Yanan Wang <wangyanan55@huawei.com>
[maz: fixed up comments and renamed callbacks]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210617105824.31752-2-wangyanan55@huawei.com
2021-06-18 12:34:52 +01:00
Johannes Berg
652e8363bb mac80211: handle various extensible elements correctly
Various elements are parsed with a requirement to have an
exact size, when really we should only check that they have
the minimum size that we need. Check only that and therefore
ignore any additional data that they might carry.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.cd101f8040a4.Iadf0e9b37b100c6c6e79c7b298cc657c2be9151a@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18 13:25:49 +02:00
Johannes Berg
bbc6f03ff2 mac80211: reset profile_periodicity/ema_ap
Apparently we never clear these values, so they'll remain set
since the setting of them is conditional. Clear the values in
the relevant other cases.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.316e32d136a9.I2a12e51814258e1e1b526103894f4b9f19a91c8d@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18 13:25:49 +02:00
Avraham Stern
0288e5e16a cfg80211: avoid double free of PMSR request
If cfg80211_pmsr_process_abort() moves all the PMSR requests that
need to be freed into a local list before aborting and freeing them.
As a result, it is possible that cfg80211_pmsr_complete() will run in
parallel and free the same PMSR request.

Fix it by freeing the request in cfg80211_pmsr_complete() only if it
is still in the original pmsr list.

Cc: stable@vger.kernel.org
Fixes: 9bb7e0f24e ("cfg80211: add peer measurement with FTM initiator API")
Signed-off-by: Avraham Stern <avraham.stern@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.1fbef57e269a.I00294bebdb0680b892f8d1d5c871fd9dbe785a5e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18 13:25:24 +02:00
Johannes Berg
b5642479b0 cfg80211: make certificate generation more robust
If all net/wireless/certs/*.hex files are deleted, the build
will hang at this point since the 'cat' command will have no
arguments. Do "echo | cat - ..." so that even if the "..."
part is empty, the whole thing won't hang.

Cc: stable@vger.kernel.org
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Link: https://lore.kernel.org/r/iwlwifi.20210618133832.c989056c3664.Ic3b77531d00b30b26dcd69c64e55ae2f60c3f31e@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2021-06-18 13:25:15 +02:00
Jason Li
b61c8bf469 tty: serial: Add UART driver for Cortina-Access platform
This driver supports Cortina Access UART IP integrated
in most all CAXXXX line of SoCs. Earlycom is also supported

Signed-off-by: Jason Li <jason.li@cortina-access.com>
Link: https://lore.kernel.org/r/20210615165750.31261-1-alex.nemirovsky@cortina-access.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18 13:12:12 +02:00
Jiri Slaby
18aaa97eee MAINTAINERS: add me back as mxser maintainer
I was given a few cards from MOXA (thanks a lot). Provided I can now
test changes, I cleaned up the driver a bit and can continue maintaining
it.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-71-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18 13:10:20 +02:00
Jiri Slaby
0dd77d02c3 mxser: Documentation, fix typos
Fix some typos in the mxser's documentation.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-70-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18 13:10:03 +02:00
Jiri Slaby
b34440ffad mxser: Documentation, make the docs up-to-date
Remove all the obsolete information from the documentation of mxser
driver. Either it was about the out-of-tree driver, or it was superseded
by udev et al.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-69-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18 13:10:03 +02:00
Jiri Slaby
a7f6afcd4e mxser: Documentation, remove traces of callout device
Callout devices are ancient history, so remove its traces from mxser's
documentation.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-68-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18 13:10:03 +02:00
Jiri Slaby
5d1ea1ad28 mxser: introduce mxser_16550A_or_MUST helper
This check is used in the code on many places. Either in positive or
negative form. So introduce a helper called mxser_16550A_or_MUST for
this purpose. And replace all the occurrences.

This simplifies many ifs in there.

Signed-off-by: Jiri Slaby <jslaby@suse.cz>
Link: https://lore.kernel.org/r/20210618061516.662-67-jslaby@suse.cz
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-18 13:10:03 +02:00