Commit graph

1,031,458 commits

Author SHA1 Message Date
Yunsheng Lin
99f6b5fb5f net: hns3: use bounce buffer when rx page can not be reused
Currently rx page will be reused to receive future packet when
the stack releases the previous skb quickly. If the old page
can not be reused, a new page will be allocated and mapped,
which comsumes a lot of cpu when IOMMU is in the strict mode,
especially when the application and irq/NAPI happens to run on
the same cpu.

So allocate a new frag to memcpy the data to avoid the costly
IOMMU unmapping/mapping operation, and add "frag_alloc_err"
and "frag_alloc" stats in "ethtool -S ethX" cmd.

The throughput improves above 50% when running single thread of
iperf using TCP when IOMMU is in strict mode and iperf shares the
same cpu with irq/NAPI(rx_copybreak = 2048 and mtu = 1500).

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 00:36:06 -07:00
Yunsheng Lin
fa7711b888 net: hns3: optimize the rx page reuse handling process
Current rx page offset only reset to zero when all the below
conditions are satisfied:
1. rx page is only owned by driver.
2. rx page is reusable.
3. the page offset that is above to be given to the stack has
reached the end of the page.

If the page offset is over the hns3_buf_size(), it means the
buffer below the offset of the page is usable when the above
condition 1 & 2 are satisfied, so page offset can be reset to
zero instead of increasing the offset. We may be able to always
reuse the first 4K buffer of a 64K page, which means we can
limit the hot buffer size as much as possible.

The above optimization is a side effect when refacting the
rx page reuse handling in order to support the rx copybreak.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 00:36:06 -07:00
Yunsheng Lin
7459775e9f net: hns3: support dma_map_sg() for multi frags skb
Using the queue based tx buffer, it is also possible to allocate a
sgl buffer, and use skb_to_sgvec() to convert the skb to the sgvec
in order to support the dma_map_sg() to decreases the overhead of
IOMMU mapping and unmapping.

Firstly, it reduces the number of buffers. For example, a tcp skb
may have a 66-byte header and 3 fragments of 4328, 32768, and 28064
bytes. With this patch, dma_map_sg() will combine them into two
buffers, 66-bytes header and one 65160-bytes fragment by using IOMMU.

Secondly, it reduces the number of dma mapping and unmapping. All the
original 4 buffers are mapped only once rather than 4 times.

The throughput improves above 10% when running single thread of iperf
using TCP when IOMMU is in strict mode.

Suggested-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 00:36:06 -07:00
Huazhong Tan
1a00197b7d net: hns3: add support to query tx spare buffer size for pf
Add support to query tx spare buffer size from configuration
file, and use this info to do spare buffer initialization when
the module parameter 'tx_spare_buf_size' is not specified.

Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 00:36:06 -07:00
Yunsheng Lin
907676b130 net: hns3: use tx bounce buffer for small packets
when the packet or frag size is small, it causes both security and
performance issue. As dma can't map sub-page, this means some extra
kernel data is visible to devices. On the other hand, the overhead
of dma map and unmap is huge when IOMMU is on.

So add a queue based tx shared bounce buffer to memcpy the small
packet when the len of the xmitted skb is below tx_copybreak.
Add tx_spare_buf_size module param to set the size of tx spare
buffer, and add set/get_tunable to set or query the tx_copybreak.

The throughtput improves from 30 Gbps to 90+ Gbps when running 16
netperf threads with 32KB UDP message size when IOMMU is in the
strict mode(tx_copybreak = 2000 and mtu = 1500).

Suggested-by: Barry Song <song.bao.hua@hisilicon.com>
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 00:36:06 -07:00
Yunsheng Lin
8677d78c3d net: hns3: refactor for hns3_fill_desc() function
Factor out hns3_fill_desc() so that it can be reused in the
tx bounce supporting.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 00:36:06 -07:00
Yunsheng Lin
26f1ccdf60 net: hns3: minor refactor related to desc_cb handling
desc_cb is used to store mapping and freeing info for the
corresponding desc, which is used in the cleaning process.
There will be more desc_cb type coming up when supporting the
tx bounce buffer, change desc_cb type to bit-wise value in order
to reduce the desc_cb type checking operation in the data path.

Also move the desc_cb type definition to hns3_enet.h because it
is only used in hns3_enet.c, and declare a local variable desc_cb
in hns3_clear_desc() to reduce lines of code.

Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Guangbin Huang <huangguangbin2@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-16 00:36:06 -07:00
Greg Kroah-Hartman
60ed39db6e One bug fix for USB charger detection at imx7d and imx8m series SoCs
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEDaZUZmFxRG/wNThrSFkpgVDWcbsFAmDJT3gACgkQSFkpgVDW
 cbvh6QgAucjmka2WfiFraPRij4SyveqgTUQtmjLWhNcVugla6eHJTmsRlTvqj3YT
 zBRv418FRQZmbwojOM/Vai49qcG+/nJGJDAupQ5v+tUmtzb0BIyNSxLnBpgrspFK
 8qBUA3lF7JLz4xsXwICNLNvvvcCPjYOVfk3430FpkythJIK5UCFidkrUB2S/p6/1
 OpzWMICZxv4kdSxf7EkfOhjbfzqJZcJZR+sDjYNnOA4gLGClkE0OQC9k+qIpIEDs
 UHxtL0fmToW0EOv/14SBRVTlfqKH5WgEUDlodNw7wVYSfMx1NoU2UgwcytD2SZX8
 7dcDhvuT2YZv/HuV83vYAgN5hJRCmQ==
 =Drqs
 -----END PGP SIGNATURE-----

Merge tag 'usb-v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus

Peter writes:

One bug fix for USB charger detection at imx7d and imx8m series SoCs

* tag 'usb-v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  usb: chipidea: imx: Fix Battery Charger 1.2 CDP detection
2021-06-16 09:33:39 +02:00
Phillip Potter
d78f4549d3 staging: rtl8188eu: remove _dbg_dump_tx_info function
Remove the _dbg_dump_tx_info function from hal/rtl8188e_xmit.c, as
it doesn't actually do anything and is only called from one place.
It used to have some redundant debugging statements in it, but these
have now been removed anyway, so all it does is read information from
the adapter to set a variable 'dump_txdesc' which is then never used.
This fixes a kernel test robot warning.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-8-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:25:29 +02:00
Phillip Potter
daadab0382 staging: rtl8188eu: remove unused variables from hal/rtl8188e_cmd.c
Remove set but unused variables from within the file hal/rtl8188e_cmd.c
in the function rtl8188e_set_FwMediaStatus_cmd, as they are triggering
kernel test robot warnings.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-7-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:25:29 +02:00
Phillip Potter
b16605f9b9 staging: rtl8188eu: remove unused variable from os_dep/ioctl_linux.c
Remove set but unused variable 'reason' from within the file
os_dep/ioctl_linux.c in the function rtw_wx_set_mlme, as it is
triggering a kernel test robot warning.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-6-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:25:29 +02:00
Phillip Potter
950c352534 staging: rtl8188eu: remove unused variables from core/rtw_mlme_ext.c
Remove set but unused variables from within the file core/rtw_mlme_ext.c,
as they are triggering kernel test robot warnings.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-5-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:25:29 +02:00
Phillip Potter
ee82be77be staging: rtl8188eu: remove unused variables from core/rtw_efuse.c
Remove set but unused variables from within the file core/rtw_efuse.c
in the function efuse_read_phymap_from_txpktbuf, as they are triggering
kernel test robot warnings. Also, remove the local 'lenc' array as well,
as nothing is done with its values. Keep the two usb_read8 calls
however, as this patch is purely for warnings, not to change behaviour
of the code.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-4-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:25:29 +02:00
Phillip Potter
65df1d15d0 staging: rtl8188eu: use prefix decrement operator on trycnt variable
Modify trycnt condition in the do/while loop of rtw_hal_set_hwreg to use
a prefix decrement operator instead of postfix. As an unsigned 8-bit
integer, this value would actually be 255 after the end of the do/while
loop, which is almost certainly not what was intended. It is more
reasonable to assume a loop counter should be zero at the end of all
loop iterations. Indeed, the line following the loop previously contained
an if statement which assumed trycnt was 0, and therefore was never
triggered.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-3-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:25:29 +02:00
Phillip Potter
0ef5dec44a staging: rtl8188eu: remove empty label from mlmeext_joinbss_event_callback
Remove empty label at end of mlmeext_joinbss_event_callback function, as
it only contained a return in my last patch to make the code build. It
is better removed, and the corresponding goto converted to a return.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210615223607.13863-2-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:25:28 +02:00
Ondrej Zary
d495dd743d serial_cs: Add Option International GSM-Ready 56K/ISDN modem
Add support for Option International GSM-Ready 56K/ISDN PCMCIA modem
card.

Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210611201940.23898-2-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:20:29 +02:00
Ondrej Zary
11b1d881a9 serial_cs: remove wrong GLOBETROTTER.cis entry
The GLOBETROTTER.cis entry in serial_cs matches more devices than
intended and breaks them. Remove it.

Example: # pccardctl info
PRODID_1="Option International
"
PRODID_2="GSM-Ready 56K/ISDN
"
PRODID_3="021
"
PRODID_4="A
"
MANFID=0013,0000
FUNCID=0

result:
pcmcia 0.0: Direct firmware load for cis/GLOBETROTTER.cis failed with error -2

The GLOBETROTTER.cis is nowhere to be found. There's GLOBETROTTER.cis.ihex at
https://netdev.vger.kernel.narkive.com/h4inqdxM/patch-axnet-cs-fix-phy-id-detection-for-bogus-asix-chip#post41
It's from completely diffetent card:
vers_1 4.1, "Option International", "GSM/GPRS GlobeTrotter", "001", "A"

Signed-off-by: Ondrej Zary <linux@zary.sk>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210611201940.23898-1-linux@zary.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:20:29 +02:00
Maciej W. Rozycki
7888478398 MIPS: Malta: Enable magic multipliers for Super I/O UARTs
The SMSC FDC37M817 Super I/O chip has a configuration feature that lets
it support special UART divisor values of 32770 and 32769 for bit rates
of 230400 and 460800 bits per second respectively.  Our 8250 driver core
provides support for these special divisors via the UPF_MAGIC_MULTIPLIER
flag, and YAMON firmware unconditionally configures the Super I/O chip
with these divisors enabled as well, so all we need to do in platform
setup for these bit rates to work is to set the flag.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2105182249380.3032@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:20:29 +02:00
Maciej W. Rozycki
f7adc73878 serial: 8250: Handle custom baud rates in UPF_MAGIC_MULTIPLIER range
Handle custom baud rates requested in the UPF_MAGIC_MULTIPLIER range
with BOTHER.  Currently matching is exact, that is if a baud rate that
is not either of clk/4 or clk/8 is requested, then we fall through to
the default case, which will just divide the clock rate by 16 times the
rate requested, round it to closest integer, and possibly yield even
worse results then if clamping to the extra baud rates was chosen.

So for example if we have the usual base rate of 115200 and request a
rate of 230399, then the fall-through divisor calculation will yield 1,
and consequently the baud rate of 115200 will be programmed even though
obviously the magic rate of 230400 would be more appropriate.

Make the selection of the magic rates range-qualified then and use clk/4
for rates from clk/6 up (assuming `serial8250_get_baud_rate' has already
rejected any rates too far beyond clk/4), and otherwise use clk/8 for
rates from clk/12 up, and finally fall through to the standard divisor
calculation.  Explicitly void using the undocumented rate of 153600bps
and stick to documented divisor values only.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2105200232090.29169@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:20:29 +02:00
Maciej W. Rozycki
78bcae8616 serial: 8250: Actually allow UPF_MAGIC_MULTIPLIER baud rates
Support for magic baud rate divisors of 32770 and 32769 used with SMSC
Super I/O chips for extra baud rates of 230400 and 460800 respectively
where base rate is 115200[1] has been added around Linux 2.5.64, which
predates our repo history, but the origin could be identified as commit
2a717aad772f ("Merge with Linux 2.5.64.") with the old MIPS/Linux repo
also at: <git://git.kernel.org/pub/scm/linux/kernel/git/ralf/linux.git>.

Code that is now in `serial8250_do_get_divisor' was added back then to
`serial8250_get_divisor', but that code would only ever trigger if one
of the higher baud rates was actually requested, and that cannot ever
happen, because the earlier call to `serial8250_get_baud_rate' never
returns them.  This is because it calls `uart_get_baud_rate' with the
maximum requested being the base rate, that is clk/16 or 115200 for SMSC
chips at their nominal clock rate.

Fix it then and allow UPF_MAGIC_MULTIPLIER baud rates to be selected, by
requesting the maximum baud rate of clk/4 rather than clk/16 if the flag
has been set.  Also correct the minimum baud rate, observing that these
ports only support actual (non-magic) divisors of up to 32767 only.

References:

[1] "FDC37M81x, PC98/99 Compliant Enhanced Super I/O Controller with
    Keyboard/Mouse Wake-Up", Standard Microsystems Corporation, Rev.
    03/27/2000, Table 31 - "Baud Rates", p. 77

Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2105190412280.29169@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:20:29 +02:00
Maciej W. Rozycki
b1691bd049 serial: 8250: Document SMSC Super I/O UART peculiarities
Contrary to what SMSC documentation says and unlike NS16C550A UARTs the
SMSC Super I/O IC claims compatibility with the SMSC UART implementation
does not support dividing the internal PLL clock by any divisor from 1
to 65535[1], with the exception of two magic divisors of 32769 and 32770
used respectively to select the high-speed data rates of 460800bps and
230400bps[2] if enabled on a port-by-port basis in with the Serial Port
Mode Register in the Device Configuration Space[3][4].

Instead empirical evidence indicates that the divisor, as stored in the
DLL and DLM register pair, has the range of 1 to 32767 only, and bit 7
of the DLM register (bit 15 of the divisor) effectively serves as a
selection bit for the prescaler from the base frequency of 7.3728MHz,
either 4 if the bit is 0, or 1 if the bit is 1 and high-speed operation
has been enabled with the Serial Port Mode Register.

So if high-speed operation has not been enabled, then say the values of
1 and 32769 (0x8001) written into the combined DLL and DLM register pair
both select the divisor of 1 and the baud rate of 115200bps.

[1] "FDC37M81x, PC98/99 Compliant Enhanced Super I/O Controller with
    Keyboard/Mouse Wake-Up", Standard Microsystems Corporation, Rev.
    03/27/2000, Section "Programmable Baud Rate Generator (and Divisor
    Latches DLH, DLL)", p. 75

[2] same, Table 31 - "Baud Rates", p. 77

[3] same, Table 60 - "Serial Port 1, Logical Device 4 [Logical Device
    Number = 0x04]", p. 153

[4] same, Table 61 - "Serial Port 2, Logical Device 5 [Logical Device
    Number = 0x05]", p. 153

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106092330530.5469@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:20:29 +02:00
Vignesh Raghavendra
1882441cd7 dt-bindings: serial: Move omap-serial.txt to YAML schema
Convert serial-omap.txt to YAML schema for better checks and documentation.

Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20210610182227.2480-1-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:20:29 +02:00
Maciej W. Rozycki
6cbe45d8ac serial: 8250: Correct the clock for OxSemi PCIe devices
Oxford Semiconductor PCIe (Tornado) serial port devices are driven by a
fixed 62.5MHz clock input derived from the 100MHz PCI Express clock.

In the enhanced (650) mode, which we select in `autoconfig_has_efr' by
setting the ECB bit in the EFR register, and in the absence of clock
reconfiguration, which we currently don't do, the clock rate is divided
only by the oversampling rate of 16 as it is supplied to the baud rate
generator, yielding the baud base of 3906250.  This comes from the reset
values of the TCR and MCR[7] registers which are both zero[1][2][3][4],
choosing the oversampling rate of 16 and the normal (divide by 1) baud
rate generator prescaler respectively.  This is the rate that is divided
by the value held in the divisor latch to determine the baud rate used.

Replace the incorrect baud base of 4000000 with the right value of
3906250 then.

References:

[1] "OXPCIe200 PCI Express Multi-Port Bridge", Oxford Semiconductor,
    Inc., DS-0045, 10 Nov 2008, Section "Reset Configuration", p. 72

[2] "OXPCIe952 PCI Express Bridge to Dual Serial & Parallel Port",
    Oxford Semiconductor, Inc., DS-0046, Mar 06 08, Section "Reset
    Configuration", p. 27

[3] "OXPCIe954 PCI Express Bridge to Quad Serial Port", Oxford
    Semiconductor, Inc., DS-0047, Feb 08, Section "Reset Configuration",
    p. 28

[4] "OXPCIe958 PCI Express Bridge to Octal Serial Port", Oxford
    Semiconductor, Inc., DS-0048, Feb 08, Section "Reset Configuration",
    p. 28

Fixes: 7106b4e333 ("8250: Oxford Semiconductor Devices")
Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106100203510.5469@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:20:29 +02:00
Maciej W. Rozycki
f771a34b14 serial: 8250: Dissociate 4MHz Titan ports from Oxford ports
Oxford Semiconductor PCIe (Tornado) serial port devices have their baud
base set incorrectly, however their `pciserial_board' entries have been
reused for Titan serial port devices.  Define own entries for the latter
devices then, carrying over the settings, so that Oxford entries can be
fixed.

Signed-off-by: Maciej W. Rozycki <macro@orcam.me.uk>
Link: https://lore.kernel.org/r/alpine.DEB.2.21.2106100142310.5469@angie.orcam.me.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-16 09:20:28 +02:00
Colin Ian King
36d1a6729b ALSA: bebob: Fix bit flag quirk constants
The quirking bit-flags are currently set as contiguous integer enum values
and so currently SND_BEBOB_QUIRK_INITIAL_DISCONTINUOUS_DBC is zero and so
he quirking never getting set or tested correctly for this quirk. Fix this
by setting the quirking constants as shifted bit values.

Addresses-Coverity: ("Bitwise-and with zero")
Fixes: 93cd12d6e8 ("ALSA: bebob: code refactoring for model-dependent quirks")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Link: https://lore.kernel.org/r/20210615142048.59900-1-colin.king@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 08:53:24 +02:00
Yang Yingliang
80b9c1be56 ALSA: ppc: fix error return code in snd_pmac_probe()
If snd_pmac_tumbler_init() or snd_pmac_tumbler_post_init() fails,
snd_pmac_probe() need return error code.

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20210616021121.1991502-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-06-16 08:52:29 +02:00
Florian Westphal
30ad6a84f6 xfrm: avoid compiler warning when ipv6 is disabled
with CONFIG_IPV6=n:
xfrm_output.c:140:12: warning: 'xfrm6_hdr_offset' defined but not used

Fixes: 9acf4d3b9e ("xfrm: ipv6: add xfrm6_hdr_offset helper")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-06-16 08:32:14 +02:00
Antony Antony
1b50dd478f xfrm: delete xfrm4_output_finish xfrm6_output_finish declarations
These function declarations are not needed any more.
The definitions were deleted.

Fixes: 2ab6096db2 ("xfrm: remove output_finish indirection from xfrm_state_afinfo")
Signed-off-by: Antony Antony <antony.antony@secunet.com>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-06-16 08:30:53 +02:00
Mauro Carvalho Chehab
6ef43d273e media: admin-guide: avoid using ReST :doc:foo markup
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-16 07:26:46 +02:00
Mauro Carvalho Chehab
a169c44e58 media: driver-api: drivers: avoid using ReST :doc:foo markup
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-16 07:26:46 +02:00
Mauro Carvalho Chehab
d759cd46b9 media: userspace-api: avoid using ReST :doc:foo markup
The :doc:`foo` tag is auto-generated via automarkup.py.
So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-16 07:26:46 +02:00
Mauro Carvalho Chehab
703ac06a88 media: docs: */media/index.rst: don't use ReST doc:foo
The :doc:`foo` tag is auto-generated via automarkup.py.
    So, use the filename at the sources, instead of :doc:`foo`.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-16 07:26:46 +02:00
James Smart
ebc076b3ed scsi: elx: efct: Tie into kernel Kconfig and build process
This final patch ties the efct driver into the kernel Kconfig and build
linkages in the drivers/scsi directory.

Link: https://lore.kernel.org/r/20210601235512.20104-32-jsmart2021@gmail.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:33 -04:00
James Smart
6f84c11ecc scsi: elx: efct: Add Makefile and Kconfig for efct driver
Add efct driver Kconfig and Makefiles.

Link: https://lore.kernel.org/r/20210601235512.20104-31-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:33 -04:00
James Smart
32ddbad5b6 scsi: elx: efct: Transport class host interface support
Integration with the scsi_fc_transport host interfaces.

Link: https://lore.kernel.org/r/20210601235512.20104-30-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:32 -04:00
James Smart
ab332fcbcd scsi: elx: efct: Transport and hardware teardown routines
Implement routines to detach transport and hardware objects.

Link: https://lore.kernel.org/r/20210601235512.20104-29-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:32 -04:00
James Smart
6ae7147bfe scsi: elx: efct: Link and host statistics
Add routines to retrieve link stats and host stats, add firmware update
helper routines.

Link: https://lore.kernel.org/r/20210601235512.20104-28-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:32 -04:00
James Smart
dd53d333aa scsi: elx: efct: Hardware I/O submission routines
Routines that write I/O to work queue, send SRRs and raw frames.

Link: https://lore.kernel.org/r/20210601235512.20104-27-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:32 -04:00
James Smart
692e5d73a8 scsi: elx: efct: LIO backend interface routines
Add LIO backend template registration and template functions.

Link: https://lore.kernel.org/r/20210601235512.20104-26-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:32 -04:00
James Smart
3e6414003b scsi: elx: efct: SCSI I/O handling routines
Routines for SCSI transport IO alloc, build and send I/O.

Link: https://lore.kernel.org/r/20210601235512.20104-25-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:32 -04:00
James Smart
f45ae6aac0 scsi: elx: efct: Unsolicited FC frame processing routines
Add routines to handle unsolicited FC frames.

Link: https://lore.kernel.org/r/20210601235512.20104-24-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:32 -04:00
James Smart
e2cf422ba8 scsi: elx: efct: Hardware queues processing
Add driver definitions for:

 - Routines for EQ, CQ, WQ and RQ processing.

 - Routines for I/O object pool allocation and deallocation.

Link: https://lore.kernel.org/r/20210601235512.20104-23-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:31 -04:00
James Smart
63de51327a scsi: elx: efct: Hardware I/O and SGL initialization
Add driver definitions for:

 - Routines to create I/O interfaces (wqs, etc), SGL initialization, and
   configure hardware features.

Link: https://lore.kernel.org/r/20210601235512.20104-22-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:31 -04:00
James Smart
580c0255e4 scsi: elx: efct: RQ buffer, memory pool allocation and deallocation APIs
Add driver definitions for:

 - RQ data buffer allocation and deallocate.

 - Memory pool allocation and deallocation APIs.

 - Mailbox command submission and completion routines.

Link: https://lore.kernel.org/r/20210601235512.20104-21-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:31 -04:00
James Smart
e10fc23359 scsi: elx: efct: Hardware queue creation and deletion
Add routines for queue creation, deletion, and configuration.

Link: https://lore.kernel.org/r/20210601235512.20104-20-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:31 -04:00
James Smart
4df84e8466 scsi: elx: efct: Driver initialization routines
Add driver definitions for:

 - Emulex FC Target driver init, attach and hardware setup routines.

Link: https://lore.kernel.org/r/20210601235512.20104-19-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:31 -04:00
James Smart
75a10a7a91 scsi: elx: efct: Data structures and defines for hw operations
Start the population of the efct target mode driver.  The driver is
contained in the drivers/scsi/elx/efct subdirectory.

Create the efct directory and start population of the driver by adding
SLI-4 configuration parameters, data structures for configuring SLI-4
queues, converting from OS to SLI-4 IO requests, and handling async events.

Link: https://lore.kernel.org/r/20210601235512.20104-18-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:31 -04:00
James Smart
cdaf39bad5 scsi: elx: libefc: Register discovery objects with hardware
Add library interface definitions for:

 - Registrations for VFI, VPI and RPI.

Link: https://lore.kernel.org/r/20210601235512.20104-17-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:30 -04:00
James Smart
8f406ef728 scsi: elx: libefc: Extended link Service I/O handling
Add library interface definitions for:

 - Functions to build and send ELS/CT/BLS commands and responses.

Link: https://lore.kernel.org/r/20210601235512.20104-16-jsmart2021@gmail.com
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:30 -04:00
James Smart
202bfdffae scsi: elx: libefc: FC node ELS and state handling
Add library interface definitions for:

 - FC node PRLI handling and state management.

Link: https://lore.kernel.org/r/20210601235512.20104-15-jsmart2021@gmail.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Daniel Wagner <dwagner@suse.de>
Co-developed-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: Ram Vegesna <ram.vegesna@broadcom.com>
Signed-off-by: James Smart <jsmart2021@gmail.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
2021-06-15 23:39:30 -04:00