Commit graph

1,031,458 commits

Author SHA1 Message Date
Baokun Li
8c77f1cb84 dm writecache: use list_move instead of list_del/list_add in writecache_writeback()
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-06-14 11:49:04 -04:00
Tony Lindgren
11ef6bc846 wlcore/wl12xx: Fix wl12xx get_mac error if device is in ELP
At least on wl12xx, reading the MAC after boot can fail with a warning
at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read.
The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls
after request_firmware_work_func().

After the error, no wireless interface is created. Reloading the wl12xx
module makes the interface work.

Turns out the wlan controller can be in a low-power ELP state after the
boot from the bootloader or kexec, and needs to be woken up first.

Let's wake the hardware and add a sleep after that similar to
wl12xx_pre_boot() is already doing.

Note that a similar issue could exist for wl18xx, but I have not seen it
so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not
produce similar errors.

Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210603062814.19464-1-tony@atomide.com
2021-06-14 18:47:40 +03:00
YueHaibing
86f1ea9d64 wlcore: use DEVICE_ATTR_<RW|RO> macro
Use DEVICE_ATTR_<RW|RO> helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210523033538.25568-1-yuehaibing@huawei.com
2021-06-14 18:47:09 +03:00
Mikulas Patocka
991bd8d7bc dm writecache: commit just one block, not a full page
Some architectures have pages larger than 4k and committing a full
page causes needless overhead.

Fix this by writing a single block when committing the superblock.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-06-14 11:45:30 -04:00
Mikulas Patocka
620cbe40ed dm writecache: remove unused gfp_t argument from wc_add_block()
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
2021-06-14 11:44:06 -04:00
Clayton Casciato
2ef53bf714 ACPI: processor_throttling: Fix several coding style issues
Drop one redundant return statement and fix a few white space
issues.

Signed-off-by: Clayton Casciato <majortomtosourcecontrol@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-14 17:39:24 +02:00
Clayton Casciato
85c1ad47d2 ACPI: sysfs: Drop four redundant return statements
Signed-off-by: Clayton Casciato <majortomtosourcecontrol@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-14 17:32:34 +02:00
Clayton Casciato
49b9441a25 ACPI: video: Drop three redundant return statements
Signed-off-by: Clayton Casciato <majortomtosourcecontrol@gmail.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-14 17:29:12 +02:00
Bryan O'Donoghue
ef48667557 wcn36xx: Move hal_buf allocation to devm_kmalloc in probe
Right now wcn->hal_buf is allocated in wcn36xx_start(). This is a problem
since we should have setup all of the buffers we required by the time
ieee80211_register_hw() is called.

struct ieee80211_ops callbacks may run prior to mac_start() and therefore
wcn->hal_buf must be initialized.

This is easily remediated by moving the allocation to probe() taking the
opportunity to tidy up freeing memory by using devm_kmalloc().

Fixes: 8e84c25821 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605173347.2266003-1-bryan.odonoghue@linaro.org
2021-06-14 18:27:07 +03:00
Yang Li
aa3a522c4f ACPI: sleep: Fix acpi_pm_pre_suspend() kernel-doc
Fix function name in sleep.c kernel-doc comment
to remove a warning found by running make W=1 LLVM=1.

drivers/acpi/sleep.c:413: warning: expecting prototype for
acpi_pre_suspend(). Prototype was for acpi_pm_pre_suspend() instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-14 17:22:07 +02:00
Jiapeng Chong
743b575af1 wcn36xx: Fix inconsistent indenting
Eliminate the follow smatch warning:

drivers/net/wireless/ath/wcn36xx/dxe.c:803 wcn36xx_dxe_tx_frame() warn:
inconsistent indenting.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1622024568-32130-1-git-send-email-jiapeng.chong@linux.alibaba.com
2021-06-14 18:20:21 +03:00
Yang Li
69530b4347 ACPI: processor_throttling: Remove redundant initialization of 'obj'
'obj' is being initialized, however this value is never read as
'obj' is assigned an updated value later. Remove the redundant
initialization.

Clean up clang warning:
drivers/acpi/processor_throttling.c:409:20: warning: Value stored to
'obj' during its initialization is never read
[clang-analyzer-deadcode.DeadStores]

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2021-06-14 17:19:22 +02:00
Bryan O'Donoghue
1e2e8ee957 wcn36xx: Enable WOWLAN flags
Enable flags for

- Magic packet
- GTK rekey

Previous patches implemented the necessary code to switch these two on.
Standalone magic packet absent GTK rekey is pretty useless, so it makes
sense to flag both at once.

Once done it is possible for wcn36xx firmware to

1. Respond to ipv4 and ipv6 ARP/NS lookup requests
2. Bring the system out of suspend when a magic packet is received.
   Magic in our case is a simple ipv4 or ipv6 unicast.
3. GTK rekey whilst in suspend
   Once we wake from suspend the GTK will be updated as necessary

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-13-bryan.odonoghue@linaro.org
2021-06-14 18:18:18 +03:00
Bryan O'Donoghue
ebe7c1a663 wcn36xx: Add host resume request support
This commit is the corresponding resume() path request to the firmware when
resuming. Unlike the suspend() version which is a unidirectional
indication, the resume version is a standard request/response.

Once the resume() request completes ipv4 ARP, ipv6 NS and GTK rekey offload
stop working and can subsequently be rolled back.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-12-bryan.odonoghue@linaro.org
2021-06-14 18:18:17 +03:00
Bryan O'Donoghue
60f0078b1e wcn36xx: Add Host suspend indication support
In order to activate ipv4 ARP offload, ipv6 NS offload and firmware GTK
offload we need to send a unidirectional indication from host to wcn
indicating a transition to suspend.

Once done, firmware will respond to ARP broadcasts, ipv6 NS lookups and
perform GTK rekeys without waking the host.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-11-bryan.odonoghue@linaro.org
2021-06-14 18:18:16 +03:00
Bryan O'Donoghue
bedf1169bc wcn36xx: Add GTK offload info to WoWLAN resume
Having enabled GTK rekey in suspend, we need to extract the replay counter
from the firmware on resume and perform a ieee80211_gtk_rekey_notify() so
that the STA remains verified from the perspective of the AP.

In order to enable the SMD command and response we need to pack the
existing command/response structures. Given these structures are currently
unused, there's no need to backport this as a fix.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-10-bryan.odonoghue@linaro.org
2021-06-14 18:18:15 +03:00
Bryan O'Donoghue
6693f7675c wcn36xx: Add GTK offload to WoWLAN path
Using previously set GTK KCK and KEK material this commit adds GTK rekeying
to the WoWLAN suspend/resume path. A small error in the packing of the
up to now unused command structure is fixed as we go.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-9-bryan.odonoghue@linaro.org
2021-06-14 18:18:15 +03:00
Bryan O'Donoghue
8974e5917b wcn36xx: Add set_rekey_data callback
Add a callback for Group Temporal Key tracking as provided by the standard
WiFi ops structure.

We track the key to integrate GTK offloading into the WoWLAN suspend path
later on. Code comes from the Intel iwlwifi driver with minimal name
changes.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-8-bryan.odonoghue@linaro.org
2021-06-14 18:18:14 +03:00
Bryan O'Donoghue
1456223c46 wcn36xx: Add ipv6 namespace offload in suspend
We need to respond to ipv6 namespace lookups when in suspend. This patch
adds the necessary changes to issue the appropriate firmware command on
suspend and resume to enter/exit firmware offloaded ns lookup.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-7-bryan.odonoghue@linaro.org
2021-06-14 18:18:13 +03:00
Bryan O'Donoghue
c7a61af559 wcn36xx: Add ipv6 address tracking
Taking code from iwlwifi this commit adds a standard callback for
ipv6_addr_change().

This callback allows wcn36xx to know the set of ipv6 addresses. Something
we need to know in order to get wowlan working with ipv6.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-6-bryan.odonoghue@linaro.org
2021-06-14 18:18:12 +03:00
Bryan O'Donoghue
6feb634f4d wcn36xx: Do not flush indication queue on suspend/resume
Testing on Android reveals that the flush on both suspend and resume of the
firmware indication work-queue can stall indefinitely.

Given this code path doesn't appear to have been exercised up until now,
removing this flush to unblock this situation.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-5-bryan.odonoghue@linaro.org
2021-06-14 18:18:12 +03:00
Bryan O'Donoghue
5478c41fce wcn36xx: Add ipv4 ARP offload support in suspend
Add ARP offload support. Firmware is capable of responding to ARP requests
for a single ipv4 address only.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-4-bryan.odonoghue@linaro.org
2021-06-14 18:18:11 +03:00
Bryan O'Donoghue
f2f4960106 wcn36xx: Run suspend for the first ieee80211_vif
A subsequent set of patches will extend out suspend/resume support in this
driver, we cannot set the firmware up for multiple ipv4/ipv6 addresses and
as such we can't iterate through a list of ieee80211_vif.

Constrain the interaction with the firmware to the first ieee80211_vif on
the suspend/resume/wowlan path.

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-3-bryan.odonoghue@linaro.org
2021-06-14 18:18:10 +03:00
Bryan O'Donoghue
ba4e967379 wcn36xx: Return result of set_power_params in suspend
wcn36xx_smd_set_power_params() can return an error. For the purposes of
entering into suspend we need the suspend() function to trap and report
errors up the stack.

First step in this process is reporting the existing result code for
wcn36xx_smd_set_power_params().

Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-2-bryan.odonoghue@linaro.org
2021-06-14 18:18:09 +03:00
Pavel Skripkin
e02a3b9458 staging: rtl8712: fix memory leak in rtl871x_load_fw_cb
There is a leak in rtl8712 driver.
The problem was in non-freed adapter data if
firmware load failed.

This leak can be reproduced with this code:
https://syzkaller.appspot.com/text?tag=ReproC&x=16612f02d00000,
Autoload must fail (to not hit memory leak reported by syzkaller)

There are 2 possible ways how rtl871x_load_fw_cb() and
r871xu_dev_remove() can be called (in case of fw load error).

1st case:
	r871xu_dev_remove() then rtl871x_load_fw_cb()

	In this case r871xu_dev_remove() will wait for
	completion and then will jump to the end, because
	rtl871x_load_fw_cb() set intfdata to NULL:

	if (pnetdev) {
		struct _adapter *padapter = netdev_priv(pnetdev);

		/* never exit with a firmware callback pending */
		wait_for_completion(&padapter->rtl8712_fw_ready);
		pnetdev = usb_get_intfdata(pusb_intf);
		usb_set_intfdata(pusb_intf, NULL);
		if (!pnetdev)
			goto firmware_load_fail;

		... clean up code here ...
	}

2nd case:
	rtl871x_load_fw_cb() then r871xu_dev_remove()

	In this case pnetdev (from code snippet above) will
	be zero (because rtl871x_load_fw_cb() set it to NULL)
	And clean up code won't be executed again.

So, in all cases we need to free adapted data in rtl871x_load_fw_cb(),
because disconnect function cannot take care of it. And there won't be
any race conditions, because complete() call happens after setting
intfdata to NULL.

In previous patch I moved out free_netdev() from r8712_free_drv_sw()
and that's why now it's possible to free adapter data and then call
complete.

Fixes: 8c213fa591 ("staging: r8712u: Use asynchronous firmware loading")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/81e68fe0194499cc2e7692d35bc4dcf167827d8f.1623620630.git.paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:48:09 +02:00
Pavel Skripkin
d1d3e3cdfd staging: rtl8712: fix error handling in r871xu_drv_init
Previous error handling path was unique for all
possible errors and there was unnecessary branching.
Also, one step for freeing drv_sw was missing. All
these problems was fixed by restructuring error
handling path.

Also, moved out free_netdev() from r8712_free_drv_sw() for
correct error handling.

Fixes: 2865d42c78 ("staging: r8712u: Add the new driver to the mainline kernel")
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/febb00f72354449bb4d305f373d6d2f47e539ab4.1623620630.git.paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:48:09 +02:00
Pavel Skripkin
69d998f1e5 staging: rtl8712: remove redundant check in r871xu_drv_init
padapter->dvobj_init is initialized rigth before
initialization check. There is no need for any
branching here.

Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Link: https://lore.kernel.org/r/d367e5f39f22af44c545f8710cc18fb00f10e66c.1623620630.git.paskripkin@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:48:09 +02:00
Martin Kaiser
64ed82a549 staging: rtl8188eu: remove another write-only member
bAPKThermalMeterIgnore in struct hal_data_8188e is never read and can
be removed.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210612180019.20387-5-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:47:03 +02:00
Martin Kaiser
d1d900c665 staging: rtl8188eu: remove a write-only power-index members
Remove power index members of struct hal_data_8188e that are written to
but never read.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210612180019.20387-4-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:46:56 +02:00
Martin Kaiser
33bbc15d5a staging: rtl8188eu: remove a write-only struct member
FwRsvdPageStartOffset in struct hal_data_8188e is never read. Remove it.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210612180019.20387-3-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:46:48 +02:00
Martin Kaiser
ebdc8d8cf6 staging: rtl8188eu: remove unused hal_data_8188e members
Remove some members of struct hal_data_8188e which are not used
in this driver.

Signed-off-by: Martin Kaiser <martin@kaiser.cx>
Link: https://lore.kernel.org/r/20210612180019.20387-1-martin@kaiser.cx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:42:58 +02:00
Dennis Zhou
4829c791b2 percpu: initialize best_upa variable
Tom reported this finding from clang 10's static analysis [1].

Due to the way the code is written, it will always see a successful loop
iteration. Instead of setting an initial value, check that it was set
instead with BUG_ON() because 0 units per allocation is bogus.

[1] https://lore.kernel.org/lkml/20210515180817.1751084-1-trix@redhat.com/

Reported-by: Tom Rix <trix@redhat.com>
Signed-off-by: Dennis Zhou <dennis@kernel.org>
2021-06-14 14:42:05 +00:00
Tobias Alam
7c0ae9e01d staging: qlge: change msleep to usleep_range
This patch changes msleep() to usleep_range() based on
Documentation/timers/timers-howto.txt. It suggests using usleep_range()
for small msec(1ms - 20ms) because msleep() will often sleep longer than
the desired value. Issue found by checkpatch.

Signed-off-by: Tobias Alam <tobiasalam@gmail.com>
Link: https://lore.kernel.org/r/YMa60p5dl0LMV/9D@tobias-VirtualBox
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:40:34 +02:00
Phillip Potter
9866b3133b staging: rtl8188eu: convert DBG_88E calls in core/rtw_recv.c
Convert all calls to the DBG_88E macro in core/rtw_recv.c into
netdev_dbg calls. The DBG_88E macro is unnecessary, as visibility of
debug messages can be controlled more precisely by just using debugfs.
It is important to keep these messages still, as they are displayable
via a kernel module parameter when using DBG_88E.

One such converted call is after a failed skb allocation, but as it prints
additional information besides just stating failure, I've left it in
despite the checkpatch warning.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210613102459.7532-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:40:19 +02:00
Phillip Potter
9d056c19c5 staging: rtl8188eu: convert DBG_88E calls in core/rtw_sta_mgt.c
Convert both calls to the DBG_88E macro in core/rtw_sta_mgt.c into
netdev_dbg calls. The DBG_88E macro is unnecessary, as visibility of
debug messages can be controlled more precisely by just using debugfs.
It is important to keep these messages still, as they are displayable
via a kernel module parameter when using DBG_88E.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210613102454.7480-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:40:14 +02:00
Phillip Potter
47bbb44574 staging: rtl8188eu: remove HW_DEF_ODM_DBG_FLAG enum value
Remove HW_DEF_ODM_DBG_FLAG definition from the hal_def_variable enum
in include/hal_intf.h, and remove its usage from the switch statement
in rtw_hal_get_def_var inside hal/usb_halinit.c - this is dead code
and no longer used, now that ODM_RT_TRACE and include/odm_debug.h
have been removed.

Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20210612181942.33817-1-phil@philpotter.co.uk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:40:03 +02:00
Dan Carpenter
7002b526f4 staging: gdm724x: check for overflow in gdm_lte_netif_rx()
This code assumes that "len" is at least 62 bytes, but we need a check
to prevent a read overflow.

Fixes: 61e1210476 ("staging: gdm7240: adding LTE USB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YMcoTPsCYlhh2TQo@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:39:33 +02:00
Dan Carpenter
4a36e16085 staging: gdm724x: check for buffer overflow in gdm_lte_multi_sdu_pkt()
There needs to be a check to verify that we don't read beyond the end
of "buf".  This function is called from do_rx().  The "buf" is the USB
transfer_buffer and "len" is "urb->actual_length".

Fixes: 61e1210476 ("staging: gdm7240: adding LTE USB driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YMcnl4zCwGWGDVMG@mwanda
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-14 16:39:33 +02:00
Vignesh Raghavendra
d65f069e50 arm64: dts: ti: Drop reg-io-width/reg-shift from UART nodes
8250_omap compatible UART IPs on all SoCs have registers aligned at 4
byte address boundary and constant byte addressability. Thus there is no
need for reg-io-width or reg-shift DT properties.  These properties are
not used by 8250_omap driver nor documented as part of binding document.
Therefore drop them.

This is in preparation to move omap-serial.txt to YAML format.

Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Reviewed-by: Lokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210607134558.23704-1-vigneshr@ti.com
2021-06-14 09:29:57 -05:00
Aswath Govindraju
d3f1b155c0 arm64: dts: ti: k3-am642-evm: align ti,pindir-d0-out-d1-in property with dt-shema
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.

Fixes: 4fb6c04683 ("arm64: dts: ti: k3-am642-evm: Add support for SPI EEPROM")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210608051414.14873-3-a-govindraju@ti.com
2021-06-14 09:29:56 -05:00
Aswath Govindraju
4f76ea7b4d arm64: dts: ti: am65: align ti,pindir-d0-out-d1-in property with dt-shema
ti,pindir-d0-out-d1-in property is expected to be of type boolean.
Therefore, fix the property accordingly.

Fixes: e180f76d06 ("arm64: dts: ti: Add support for Siemens IOT2050 boards")
Fixes: 5da94b5047 ("arm64: dts: ti: k3-am654: Enable main domain McSPI0")
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210608051414.14873-2-a-govindraju@ti.com
2021-06-14 09:29:56 -05:00
Grygorii Strashko
50c9bfca1b arm64: dts: ti: k3-am642-main: fix ports mac properties
The current device tree CPSW3g node adds non-zero "mac-address" property to
the ports, which prevents random MAC address assignment to network devices
if bootloader failed to update DT. This may cause more then one host to
have the same MAC in the network.

 mac-address = [00 00 de ad be ef];
 mac-address = [00 01 de ad be ef];

In addition, there is one MAC address available in eFuse registers which
can be used for default port 1.

Hence, fix ports MAC properties by:
- resetting "mac-address" property to 0
- adding ti,syscon-efuse = <&main_conf 0x200> to Port 1

Fixes: 3753b12877 ("arm64: dts: ti: k3-am64-main: Add CPSW DT node")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Reviewed-by: Vignesh Raghavendra <vigneshr@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210608184940.25934-1-grygorii.strashko@ti.com
2021-06-14 09:29:56 -05:00
Timo Sigurdsson
f6bca4d91b ata: ahci_sunxi: Disable DIPM
DIPM is unsupported or broken on sunxi. Trying to enable the power
management policy med_power_with_dipm on an Allwinner A20 SoC based board
leads to immediate I/O errors and the attached SATA disk disappears from
the /dev filesystem. A reset (power cycle) is required to make the SATA
controller or disk work again. The A10 and A20 SoC data sheets and manuals
don't mention DIPM at all [1], so it's fair to assume that it's simply not
supported. But even if it was, it should be considered broken and best be
disabled in the ahci_sunxi driver.

[1] https://github.com/allwinner-zh/documents/tree/master/

Fixes: c5754b5220 ("ARM: sunxi: Add support for Allwinner SUNXi SoCs sata to ahci_platform")
Cc: stable@vger.kernel.org
Signed-off-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Tested-by: Timo Sigurdsson <public_timo.s@silentcreek.de>
Link: https://lore.kernel.org/r/20210614072539.3307-1-public_timo.s@silentcreek.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-14 08:26:54 -06:00
Christoph Hellwig
d07f3b081e mark pstore-blk as broken
pstore-blk just pokes directly into the pagecache for the block
device without going through the file operations for that by faking
up it's own file operations that do not match the block device ones.

As this breaks the control of the block layer of it's page cache,
and even now just works by accident only the best thing is to just
disable this driver.

Fixes: 17639f67c1 ("pstore/blk: Introduce backend for block devices")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210608161327.1537919-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-14 08:26:03 -06:00
Pavel Begunkov
aeab9506ef io_uring: inline io_iter_do_read()
There are only two calls in source code of io_iter_do_read(), the
function is small and pretty hot though is failed to get inlined.
Makr it as inline.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/25a26dae7660da73fbc2244b361b397ef43d3caf.1623634182.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-14 08:23:13 -06:00
Pavel Begunkov
78cc687be9 io_uring: unify SQPOLL and user task cancellations
Merge io_uring_cancel_sqpoll() and __io_uring_cancel() as it's easier to
have a conditional ctx traverse inside than keeping them in sync.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/adfe24d6dad4a3883a40eee54352b8b65ac851bb.1623634181.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-14 08:23:13 -06:00
Pavel Begunkov
09899b1915 io_uring: cache task struct refs
tctx in submission part is always synchronised because is executed from
the task's context, so we can batch allocate tctx/task references and
store them across syscall boundaries. It avoids enough of operations,
including an atomic for getting task ref and a percpu_counter_add()
function call, which still fallback to spinlock for large batching
cases (around >=32). Should be good for SQPOLL submitting in small
portions and coming at some moment bpf submissions.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/14b327b973410a3eec1f702ecf650e100513aca9.1623634181.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-14 08:23:13 -06:00
Pavel Begunkov
2d091d62b1 io_uring: don't vmalloc rsrc tags
We don't really need vmalloc for keeping tags, it's not a hot path and
is there out of convenience, so replace it with two level tables to not
litter kernel virtual memory mappings.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/241a3422747113a8909e7e1030eb585d4a349e0d.1623634181.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-14 08:23:13 -06:00
Pavel Begunkov
9123c8ffce io_uring: add helpers for 2 level table alloc
Some parts like fixed file table use 2 level tables, factor out helpers
for allocating/deallocating them as more users are to come.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/1709212359cd82eb416d395f86fc78431ccfc0aa.1623634181.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-14 08:23:13 -06:00
Pavel Begunkov
157d257f99 io_uring: remove rsrc put work irq save/restore
io_rsrc_put_work() is executed by workqueue in non-irq context, so no
need for irqsave/restore variants of spinlocking.

Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/2a7f77220735f4ad404ac885b4d73bdf42d2f836.1623634181.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
2021-06-14 08:23:13 -06:00