Commit graph

1,031,458 commits

Author SHA1 Message Date
M Chetan Kumar
be8c936e54 net: iosm: power management
Implements state machine to handle host & device sleep.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
9413491e20 net: iosm: encode or decode datagram
1) Encode UL packet into datagram.
2) Decode DL datagram and route it to network layer.
3) Supports credit based flow control.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
51c45fa954 net: iosm: multiplex IP sessions
Establish IP session between host-device & session management.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
3b575260cb net: iosm: bottom half
1) Bottom half(tasklet) for IRQ and task processing.
2) Tasks are processed asynchronous and synchronously.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
10685b6e98 net: iosm: wwan port control device
Implements wwan port for MBIM & AT protocol communication

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
30ebda7a31 net: iosm: channel configuration
Defines pipes & channel configurations like channel type,
pipe mappings, No. of transfer descriptors and transfer
buffer size etc.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
edf6423c04 net: iosm: shared memory I/O operations
1) Binds logical channel between host-device for communication.
2) Implements device specific(Char/Net) IO operations.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
3670970dd8 net: iosm: shared memory IPC interface
1) Initializes shared memory for host-device communication.
2) Allocate resources required for control & data operations.
3) Transfers the Device IRQ to IPC execution thread.
4) Defines the timer cbs for async events.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
dc0514f5d8 net: iosm: mmio scratchpad
1) Initializes the Scratchpad region for Host-Device communication.
2) Exposes device capabilities like chip info and device execution
   stages.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
7f41ce085d net: iosm: irq handling
1) Request interrupt vector, frees allocated resource.
2) Registers IRQ handler.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
M Chetan Kumar
7e98d785ae net: iosm: entry point
1) Register IOSM driver with kernel to manage Intel WWAN PCIe
   device(PCI_VENDOR_ID_INTEL, INTEL_CP_DEVICE_7560_ID).
2) Exposes the EP PCIe device capability to Host PCIe core.
3) Initializes PCIe EP configuration and defines PCIe driver probe, remove
   and power management OPS.
4) Allocate and map(dma) skb memory for data communication from device to
   kernel and vice versa.

Signed-off-by: M Chetan Kumar <m.chetan.kumar@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-13 13:49:38 -07:00
Linus Torvalds
e4e453434a perf tools fixes for v5.13: 5th batch
- Correct buffer copying when peeking events.
 
 - Sync cpufeatures/disabled-features.h header with the kernel sources.
 
 Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYMYTTgAKCRCyPKLppCJ+
 J0rKAQDgWLBEQ1ieiUaRYhqeaDbmxgWZ50tRadQGIaWyfuvvJQD+Pl6jQ1nEwDt9
 bP407DPeTr4fG7qkEOLt6zbM6qbj6wA=
 =XXQR
 -----END PGP SIGNATURE-----

Merge tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux

Pull perf tools fixes from Arnaldo Carvalho de Melo:

 - Correct buffer copying when peeking events

 - Sync cpufeatures/disabled-features.h header with the kernel sources

* tag 'perf-tools-fixes-for-v5.13-2021-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
  tools headers cpufeatures: Sync with the kernel sources
  perf session: Correct buffer copying when peeking events
2021-06-13 12:41:47 -07:00
Linus Torvalds
960f0716d8 NFS client bugfixes for Linux 5.13
Highlights include
 
 Stable fixes:
 - Fix use-after-free in nfs4_init_client()
 
 Bugfixes:
 - Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
 - Fix second deadlock in nfs4_evict_inode()
 - nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP
 - Fix setting of the NFS_CAP_SECURITY_LABEL capability
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEESQctxSBg8JpV8KqEZwvnipYKAPIFAmDGJPEACgkQZwvnipYK
 APLH8xAAsdoKVCW35P+FtlzQvq0iWoTvk15i4Jv8+SyFtqAZe6y6pEj9+RT47CAV
 kt/uNa6CQ9KjxxgwBf2XoGTuf4MrOUU34kQBF/tRLy9zDdXUsZH263vapopmel6L
 BVHEEsID6hz8+BUt1LFsr+8sWxG+12UiimEu0CVo4BE8SgYushWpJOQ9iL/zxi1O
 gXmlAfA9g38I9aUApke4hOPSHVTGaQaAKl5LbSoycQlJblzgA1yIXdU9sVTHDJY6
 sco9O9M+NPY8gefS4d7iXSihZin5V9rNuSJ9SKiCPikTEjZYgZbw1umGj6VnF/5e
 QD47QGgOwXKeCOBv6Oe4VYxE2JISoUFZw8+pxjy4eDO+EcJv3IrHOM8UrsiddGAA
 DLHzbbrMUx6mGdgibw/ktkwx0Q/DvGrfrvKidk33cs16DPWgTZAG//n7spuqYTmT
 8fQbJF6DDjsYM7v+WdImf7VBA8dreXb/QcHwxCtH7uG+hGyRiYoDSOmH3mGBKpLX
 idkjz6Hvj7V7Y1z4qd+nvh4Ch1V0b9BX+J/+6dKHRykpmSJTIMIlQw7/wA6a8Lp6
 WJX4KbUzZHojvqM1BMzRL34+qidihUso0RIj0VjCB1JQyosRnIeTPorfHLQZTOM0
 IjP8h48BB7E7cJeJP1dmhvm7Hb8SpFVDxDHoWRtscbQflO3Wdkw=
 =PABi
 -----END PGP SIGNATURE-----

Merge tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs

Pull NFS client bugfixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:

   - Fix use-after-free in nfs4_init_client()

  Bugfixes:

   - Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()

   - Fix second deadlock in nfs4_evict_inode()

   - nfs4_proc_set_acl should not change the value of NFS_CAP_UIDGID_NOMAP

   - Fix setting of the NFS_CAP_SECURITY_LABEL capability"

* tag 'nfs-for-5.13-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  NFSv4: Fix second deadlock in nfs4_evict_inode()
  NFSv4: Fix deadlock between nfs4_evict_inode() and nfs4_opendata_get_inode()
  NFS: FMODE_READ and friends are C macros, not enum types
  NFS: Fix a potential NULL dereference in nfs_get_client()
  NFS: Fix use-after-free in nfs4_init_client()
  NFS: Ensure the NFS_CAP_SECURITY_LABEL capability is set when appropriate
  NFSv4: nfs4_proc_set_acl needs to restore NFS_CAP_UIDGID_NOMAP on error.
2021-06-13 12:32:59 -07:00
Linus Torvalds
331a6edb30 SCSI fixes on 20210613
Four reasonably small fixes to the core for scsi host allocation
 failure paths.  The root problem is that we're not freeing the memory
 allocated by dev_set_name(), which involves a rejig of may of the free
 on error paths to do put_device() instead of kfree which, in turn, has
 several other knock on ramifications and inspection turned up a few
 other lurking bugs.
 
 Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
 -----BEGIN PGP SIGNATURE-----
 
 iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYMYEVCYcamFtZXMuYm90
 dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishbP/AP4oyLA5
 h7T5v7z29prQWn0P3TApcDVvXjOnqPNUzZlvkAEAifnVHLMehlzrJDeaSR0OUf8u
 U+SKrsxkiov5XYvwGGU=
 =0Vfx
 -----END PGP SIGNATURE-----

Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi

Pull SCSI fixes from James Bottomley:
 "Four reasonably small fixes to the core for scsi host allocation
  failure paths.

  The root problem is that we're not freeing the memory allocated by
  dev_set_name(), which involves a rejig of may of the free on error
  paths to do put_device() instead of kfree which, in turn, has several
  other knock on ramifications and inspection turned up a few other
  lurking bugs"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: core: Only put parent device if host state differs from SHOST_CREATED
  scsi: core: Put .shost_dev in failure path if host state changes to RUNNING
  scsi: core: Fix failure handling of scsi_add_host_with_dma()
  scsi: core: Fix error handling of scsi_host_alloc()
2021-06-13 12:25:33 -07:00
Guenter Roeck
33f087577e ARM: 9096/1: Remove arm_pm_restart()
All users of arm_pm_restart() have been converted to use the kernel
restart handler.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13 18:16:48 +01:00
Guenter Roeck
ab6cef1d14 ARM: 9095/1: ARM64: Remove arm_pm_restart()
All users of arm_pm_restart() have been converted to use the kernel
restart handler.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13 18:16:47 +01:00
Guenter Roeck
ce8f1ccbc0 ARM: 9094/1: Register with kernel restart handler
By making use of the kernel restart handler, board specific restart
handlers can be prioritized amongst available mechanisms for a particular
board or system.

Select the default priority of 128 to indicate that the restart callback
in the machine description is the default restart mechanism.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13 18:16:46 +01:00
Guenter Roeck
2bb565bbdc ARM: 9093/1: drivers: firmwapsci: Register with kernel restart handler
Register with kernel restart handler instead of setting arm_pm_restart
directly. This enables support for replacing the PSCI restart handler
with a different handler if necessary for a specific board.

Select a priority of 129 to indicate a higher than default priority, but
keep it as low as possible since PSCI reset is known to fail on some
boards.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13 18:16:45 +01:00
Guenter Roeck
cfca563bc1 ARM: 9092/1: xen: Register with kernel restart handler
Register with kernel restart handler instead of setting arm_pm_restart
directly.

Select a high priority of 192 to ensure that default restart handlers
are replaced if Xen is running.

Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13 18:16:44 +01:00
Wang Kefeng
89a0b011fa ARM: 9091/1: Revert "mm: qsd8x50: Fix incorrect permission faults"
This reverts commit e220ba6022.

The VERIFY_PERMISSION_FAULT is introduced since 2009 but no
one use it, just revert it and clean unused comment.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13 18:16:43 +01:00
Linus Walleij
6e121df14c ARM: 9090/1: Map the lowmem and kernel separately
Using our knowledge of where the physical kernel sections start
and end we can split mapping of lowmem and kernel apart.

This is helpful when you want to place the kernel independently
from lowmem and not be limited to putting it into lowmem only,
but also into places such as the VMALLOC area.

We extensively rewrite the lowmem mapping code to account for
all cases where the kernel image overlaps with the lowmem in
different ways. This is helpful to handle situations which
occur when the kernel is loaded in different places and makes
it possible to place the kernel in a more random manner
which is done with e.g. KASLR.

We sprinkle some comments with illustrations and pr_debug()
over it so it is also very evident to readers what is happening.

We now use the kernel_sec_start and kernel_sec_end instead
of relying on __pa() (phys_to_virt) to provide this. This
is helpful if we want to resolve physical-to-virtual and
virtual-to-physical mappings at runtime rather than
compiletime, especially if we are not using patch phys to
virt.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13 18:16:42 +01:00
Linus Walleij
a91da54570 ARM: 9089/1: Define kernel physical section start and end
When we are mapping the initial sections in head.S we
know very well where the start and end of the kernel image
in physical memory is placed. Later on it gets hard
to determine this.

Save the information into two variables named
kernel_sec_start and kernel_sec_end for convenience
for later work involving the physical start and end
of the kernel. These variables are section-aligned
corresponding to the early section mappings set up
in head.S.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13 18:16:41 +01:00
Linus Walleij
b78f63f443 ARM: 9088/1: Split KERNEL_OFFSET from PAGE_OFFSET
We want to be able to compile the kernel into an address different
from PAGE_OFFSET (start of lowmem) + TEXT_OFFSET, so start to pry
apart the address of where the kernel is located from the address
where the lowmem is located by defining and using KERNEL_OFFSET in
a few key places.

Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2021-06-13 18:16:40 +01:00
Alex Bee
623ba75a5d ARM: dts: rockchip: add power controller for RK322x
Add the power controller node and the correspondending qos nodes for
RK322x.
Also add the power-domain property to the nodes that are already
present.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210527154455.358869-10-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-13 18:25:07 +02:00
Alex Bee
1a4eb37f31 ARM: dts: rockchip: add power controller for RK3036
Add the power controller node and the correspondending qos nodes for
RK3036.
Also add the power-domain property to the nodes that are already
present.
Note: Since the regiser offsets of the axi interconnect QoS are missing
in the TRM (RK3036 TRM V1.0), they have been taken from vendor kernel.

Signed-off-by: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20210527154455.358869-9-knaerzche@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-13 18:25:06 +02:00
Uwe Kleine-König
51094deb33 arm64: dts: rockchip: Add support for USB on helios64
This enables the USB hardware needed to access devices on the sockets J1
and J13.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210611081414.1448786-1-uwe@kleine-koenig.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-13 18:18:42 +02:00
Johan Jonker
3fedcc636e ARM: dts: rockchip: add labels to the timer nodes on rk3066a
While the kernel doesn't care so much right now, boot loaders like
u-boot need to refine the node on their side, so to make life easier
for everyone add the labels to the timer nodes on rk3066a.

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20210612184733.2331-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2021-06-13 18:11:29 +02:00
William Breathitt Gray
bc84957d31 counter: interrupt-cnt: Add const qualifier for actions_list array
The struct counter_synapse actions_list member expects a const enum
counter_synapse_action array. This patch renames
interrupt_cnt_synapse_actionss to interrupt_cnt_synapse_actions and adds
a const qualifier to match actions_list.

Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Reviewed-by: <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/r/20210610013642.149961-1-vilhelm.gray@gmail.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:18 +01:00
Marc Kleine-Budde
afedd992c3 iio: ltr501: mark ltr501_chip_info as const
This patch marks the struct ltr501_chip_info as constant.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # ltr559
Link: https://lore.kernel.org/r/20210610134619.2101372-5-mkl@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:18 +01:00
Oliver Lang
71b33f6f93 iio: ltr501: ltr501_read_ps(): add missing endianness conversion
The PS ADC Channel data is spread over 2 registers in little-endian
form. This patch adds the missing endianness conversion.

Fixes: 2690be9051 ("iio: Add Lite-On ltr501 ambient light / proximity sensor driver")
Signed-off-by: Oliver Lang <Oliver.Lang@gossenmetrawatt.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # ltr559
Link: https://lore.kernel.org/r/20210610134619.2101372-4-mkl@pengutronix.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:18 +01:00
Oliver Lang
421a26f3d7 iio: ltr501: ltr559: fix initialization of LTR501_ALS_CONTR
The ltr559 chip uses only the lowest bit of the ALS_CONTR register to
configure between active and stand-by mode. In the original driver
BIT(1) is used, which does a software reset instead.

This patch fixes the problem by using BIT(0) as als_mode_active for
the ltr559 chip.

Fixes: 8592a7eefa ("iio: ltr501: Add support for ltr559 chip")
Signed-off-by: Oliver Lang <Oliver.Lang@gossenmetrawatt.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # ltr559
Link: https://lore.kernel.org/r/20210610134619.2101372-3-mkl@pengutronix.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:18 +01:00
Marc Kleine-Budde
2ac0b029a0 iio: ltr501: mark register holding upper 8 bits of ALS_DATA{0,1} and PS_DATA as volatile, too
The regmap is configured for 8 bit registers, uses a RB-Tree cache and
marks several registers as volatile (i.e. do not cache).

The ALS and PS data registers in the chip are 16 bit wide and spans
two regmap registers. In the current driver only the base register is
marked as volatile, resulting in the upper register only read once.

Further the data sheet notes:

| When the I2C read operation starts, all four ALS data registers are
| locked until the I2C read operation of register 0x8B is completed.

Which results in the registers never update after the 2nd read.

This patch fixes the problem by marking the upper 8 bits of the ALS
and PS registers as volatile, too.

Fixes: 2f2c96338a ("iio: ltr501: Add regmap support.")
Reported-by: Oliver Lang <Oliver.Lang@gossenmetrawatt.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Tested-by: Nikita Travkin <nikita@trvn.ru> # ltr559
Link: https://lore.kernel.org/r/20210610134619.2101372-2-mkl@pengutronix.de
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:18 +01:00
Tom Rix
b4c166925d iio: scmi: fix spelling of SPDX tag
checkpatch looks for SPDX-License-Identifier.
Remove the extra spaces.

Signed-off-by: Tom Rix <trix@redhat.com>
Link: https://lore.kernel.org/r/20210610214438.3161140-7-trix@redhat.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:18 +01:00
Stephan Gerhold
a7ba1c24da iio: accel: bma180/bmc150: Move BMA254 to bmc150-accel driver
Commit c1d1c4a62d ("iio: accel: bma180: BMA254 support") added
BMA254 support to the bma180 driver and changed some naming to BMA25x
to make it easier to add support for BMA253 and BMA255.

Unfortunately, there is quite some overlap between the bma180 driver
and the bmc150-accel driver. Back when the commit was made, the
bmc150-accel driver actually already had support for BMA255, and
adding support for BMA254 would have been as simple as adding a new
compatible to bmc150-accel.

The bmc150-accel driver is a bit better for BMA254 since it also
supports the motion trigger/interrupt functionality. Fortunately,
moving BMA254 support over to bmc150-accel is fairly simple because
the drivers have compatible device tree bindings.

Revert most of the changes for BMA254 support in bma180 and move
BMA254 over to bmc150-accel. This has the following advantages:

  - Support for motion trigger/interrupt
  - Fix incorrect scale values (BMA254 currently uses the same as
    BMA250 but actually they're different because of 10 vs 12 bits
    data size)
  - Less code than before :)

BMA250 could be potentially also moved but it's more complicated
because its chip_id conflicts with the one for BMA222 in bmc150-accel.
Perhaps there are also other register differences, I did not investigate
further yet (and I have no way to test it).

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-11-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:18 +01:00
Stephan Gerhold
5640fed303 dt-bindings: iio: accel: bma180/bma255: Move bma254 to bma255 schema
BMA254 is very similar to BMA253/BMA255 which are both supported by
the bmc150-accel driver. In general, there is quite some overlap between
the bma180 and bmc150-accel driver, but the bmc150-accel driver has a few
more features (e.g. motion trigger/interrupt).

Let's move bma254 over to the bma255 schema (bmc150-accel driver).

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-10-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:18 +01:00
Stephan Gerhold
d1e7ff89e6 dt-bindings: iio: bma255: Allow multiple interrupts
BMA253 has two interrupt pins (INT1 and INT2) that can be configured
independently. At the moment the bmc150-accel driver does not make use
of them but it might be able to in the future, so it's useful to already
specify all available interrupts in the device tree.

Set maxItems: 2 for interrupts to allow specifying a second one.
This is necessary as preparation to move the bosch,bma254 compatible
from bosch,bma180.yaml to bosch,bma255.yaml since bma180 allows two
interrupts, but BMA254 is better supported by the bmc150-accel driver.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-9-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:18 +01:00
Stephan Gerhold
49e95c689a iio: accel: bmc150: Add device IDs for BMA253
BMA253 is mostly like BMA255 and has exactly the same register layout
as used by the bmc150-accel driver as far I can tell. Making it work
is as simple as adding new device IDs for it since it has the same
chip_id = 0xFA (250) as BMA255 and others.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-8-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Stephan Gerhold
c3a16200c7 dt-bindings: iio: accel: bma255: Document bosch,bma253
BMA253 is mostly like BMA255 that is already supported by the
bmc150-accel driver. Document an extra bosch,bma253 compatible for it.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-7-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Stephan Gerhold
88e63ce6ca iio: accel: bmc150: Sort all chip names alphabetically / by chip ID
Right now all the device IDs are listed in seemingly random order,
make this consistent by ordering those alphabetically. Also, order
bmc150_accel_chip_info_tbl by chip ID for the same reason.

Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-6-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Stephan Gerhold
54b61203e2 iio: accel: bmc150: Drop duplicated documentation of supported chips
The chips supported by the bmc150-accel driver are clearly documented
in Kconfig, in the bmc150_accel_chip_info_tbl as well as in all the
device ID tables in the I2C/SPI drivers. It's easy to forget to update
the lists in the file header. Drop those entirely to reduce the amount
of changes required to add new chip variants.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-5-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Stephan Gerhold
c06a6aba68 iio: accel: bmc150: Drop misleading/duplicate chip identifiers
Commit 0ad4bf3701 ("iio:accel:bmc150-accel: Use the chip ID to detect
sensor variant") stopped using the I2C/ACPI match data to look up the
bmc150_accel_chip_info. However, the bmc150_accel_chip_info_tbl remained
as-is, with multiple entries with the same chip_id (e.g. 0xFA for
BMC150/BMI055/BMA255). This is redundant now because actually the driver
will always select the first entry with a matching chip_id.

So even if a device probes e.g. with BMA0255 it will end up using the
chip_info for BMC150. And in general that's fine for now, the entries
for BMC150/BMI055/BMA255 were exactly the same anyway (except for the
name, which is replaced with the more accurate one later).

But in this case it's misleading because it suggests that one should
add even more entries with the same chip_id when adding support for
new variants. Let's make that more clear by removing the enum with
the chip identifiers entirely and instead have only one entry per
chip_id.

Note that we may need to bring back some mechanism to differentiate
between different chips with the same chip_id in the future.
For example, BMA250 (currently supported by the bma180 driver) has the
same chip_id = 0x03 as BMA222 even though they have different channel
sizes (8 bits vs 10 bits). But in any case, that mechanism would
need to look quite different from what we have right now.

Cc: Bastien Nocera <hadess@hadess.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-4-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Stephan Gerhold
4c17782311 iio: accel: bmc150: Clarify combo modules in Kconfig
The Kconfig option currently says that all Bosch accelerometers
supported by the bmc150-accel driver are combo chips with both
accelerometer and magnetometer. This is wrong: actually only BMC150
is such a combo. The BMA* variants only contain an accelerometer
and the BMI055 actually is a accelerometer + gyroscope combo.

Clarify this in the help text and also make the list of supported
variants complete and sorted for consistency.

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-3-stephan@gerhold.net
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Stephan Gerhold
6e2a90af0b iio: accel: bmc150: Fix bma222 scale unit
According to sysfs-bus-iio documentation the unit for accelerometer
values after applying scale/offset should be m/s^2, not g, which explains
why the scale values for the other variants in bmc150-accel do not match
exactly the values given in the datasheet.

To get the correct values, we need to multiply the BMA222 scale values
by g = 9.80665 m/s^2.

Fixes: a1a210bf29 ("iio: accel: bmc150-accel: Add support for BMA222")
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210611080903.14384-2-stephan@gerhold.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Wei Yongjun
94588c1bf1 iio: dummy: Fix build error when CONFIG_IIO_TRIGGERED_BUFFER is not set
Gcc reports build error when CONFIG_IIO_TRIGGERED_BUFFER is not set:

riscv64-linux-gnu-ld: drivers/iio/dummy/iio_simple_dummy_buffer.o: in function `iio_simple_dummy_configure_buffer':
iio_simple_dummy_buffer.c:(.text+0x2b0): undefined reference to `iio_triggered_buffer_setup_ext'
riscv64-linux-gnu-ld: drivers/iio/dummy/iio_simple_dummy_buffer.o: in function `.L0 ':
iio_simple_dummy_buffer.c:(.text+0x2fc): undefined reference to `iio_triggered_buffer_cleanup'

Fix it by select IIO_TRIGGERED_BUFFER for config IIO_SIMPLE_DUMMY_BUFFER.

Fixes: 738f6ba118 ("iio: dummy: iio_simple_dummy_buffer: use triggered buffer core calls")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Yang Yingliang
c8cc4cf60b iio: frequency: adf4350: disable reg and clk on error in adf4350_probe()
Disable reg and clk when devm_gpiod_get_optional() fails in adf4350_probe().

Fixes:4a89d2f47ccd ("iio: adf4350: Convert to use GPIO descriptor")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210601142605.3613605-1-yangyingliang@huawei.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Stephan Gerhold
8090d67421 iio: accel: bma180: Fix BMA25x bandwidth register values
According to the BMA253 datasheet [1] and BMA250 datasheet [2] the
bandwidth value for BMA25x should be set as 01xxx:

  "Settings 00xxx result in a bandwidth of 7.81 Hz; [...]
   It is recommended [...] to use the range from ´01000b´ to ´01111b´
   only in order to be compatible with future products."

However, at the moment the drivers sets bandwidth values from 0 to 6,
which is not recommended and always results into 7.81 Hz bandwidth
according to the datasheet.

Fix this by introducing a bw_offset = 8 = 01000b for BMA25x,
so the additional bit is always set for BMA25x.

[1]: https://www.bosch-sensortec.com/media/boschsensortec/downloads/datasheets/bst-bma253-ds000.pdf
[2]: https://datasheet.octopart.com/BMA250-Bosch-datasheet-15540103.pdf

Cc: Peter Meerwald <pmeerw@pmeerw.net>
Fixes: 2017cff24c ("iio:bma180: Add BMA250 chip support")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210526094408.34298-2-stephan@gerhold.net
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Jarkko Nikula
93466212b9 counter: intel-qep: Use to_pci_dev() helper
Use to_pci_dev() helper instead of container_of(d, struct pci_dev, dev);

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20210611115558.796338-2-jarkko.nikula@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Jarkko Nikula
ac3bd9d6b1 counter: intel-qep: Mark PM callbacks with __maybe_unused
Remove CONFIG_PM ifdef and mark PM callbacks with __maybe_unused.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Jarkko Nikula <jarkko.nikula@linux.intel.com>
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Link: https://lore.kernel.org/r/20210611115558.796338-1-jarkko.nikula@linux.intel.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Alexandru Ardelean
49bd77560f iio: adc: remove unused private data assigned with spi_set_drvdata()
These were usually used before the conversion to devm_ functions, so that
the remove hook would be able to retrieve the pointer and do cleanups on
remove.
When the conversion happened, they should have been removed, but were
omitted.

Some drivers were copied from drivers that fit the criteria described
above. In any case, in order to prevent more drivers from being used as
example (and have spi_set_drvdata() needlessly set), this change removes it
from the IIO ADC group.

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210513111035.77950-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00
Alexandru Ardelean
21fd77afa1 iio: imu: remove unused private data assigned with spi_set_drvdata()
These were usually used before the conversion to devm_ functions, so that
the remove hook would be able to retrieve the pointer and do cleanups on
remove.
When the conversion happened, they should have been removed, but were
omitted.

Some drivers were copied from drivers that fit the criteria described
above. In any case, in order to prevent more drivers from being used as
example (and have spi_set_drvdata() needlessly set), this change removes it
from the IIO IMU group.

Signed-off-by: Alexandru Ardelean <aardelean@deviqon.com>
Link: https://lore.kernel.org/r/20210513122512.93187-1-aardelean@deviqon.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2021-06-13 17:00:17 +01:00