Commit graph

1,031,458 commits

Author SHA1 Message Date
Maciej Żenczykowski
90c4d05780 usb: fix various gadgets null ptr deref on 10gbps cabling.
This avoids a null pointer dereference in
f_{ecm,eem,hid,loopback,printer,rndis,serial,sourcesink,subset,tcm}
by simply reusing the 5gbps config for 10gbps.

Fixes: eaef50c760 ("usb: gadget: Update usb_assign_descriptors for SuperSpeedPlus")
Cc: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Martin K. Petersen <martin.petersen@oracle.com>
Cc: Michael R Sweet <msweet@msweet.org>
Cc: Mike Christie <michael.christie@oracle.com>
Cc: Pawel Laszczak <pawell@cadence.com>
Cc: Peter Chen <peter.chen@nxp.com>
Cc: Sudhakar Panneerselvam <sudhakar.panneerselvam@oracle.com>
Cc: Wei Ming Chen <jj251510319013@gmail.com>
Cc: Will McVicker <willmcvicker@google.com>
Cc: Zqiang <qiang.zhang@windriver.com>
Reviewed-By: Lorenzo Colitti <lorenzo@google.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608044141.3898496-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:37:13 +02:00
Mario Limonciello
d1658268e4 usb: pci-quirks: disable D3cold on xhci suspend for s2idle on AMD Renoir
The XHCI controller is required to enter D3hot rather than D3cold for AMD
s2idle on this hardware generation.

Otherwise, the 'Controller Not Ready' (CNR) bit is not being cleared by
host in resume and eventually this results in xhci resume failures during
the s2idle wakeup.

Link: https://lore.kernel.org/linux-usb/1612527609-7053-1-git-send-email-Prike.Liang@amd.com/
Suggested-by: Prike Liang <Prike.Liang@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable <stable@vger.kernel.org> # 5.11+
Link: https://lore.kernel.org/r/20210527154534.8900-1-mario.limonciello@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:36:00 +02:00
Maciej Żenczykowski
1958ff5ad2 usb: f_ncm: only first packet of aggregate needs to start timer
The reasoning for this change is that if we already had
a packet pending, then we also already had a pending timer,
and as such there is no need to reschedule it.

This also prevents packets getting delayed 60 ms worst case
under a tiny packet every 290us transmit load, by keeping the
timeout always relative to the first queued up packet.
(300us delay * 16KB max aggregation / 80 byte packet =~ 60 ms)

As such the first packet is now at most delayed by 300us.

Under low transmit load, this will simply result in us sending
a shorter aggregate, as originally intended.

This patch has the benefit of greatly reducing (by ~10 factor
with 1500 byte frames aggregated into 16 kiB) the number of
(potentially pretty costly) updates to the hrtimer.

Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Link: https://lore.kernel.org/r/20210608085438.813960-1-zenczykowski@gmail.com
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:34:18 +02:00
Maciej Żenczykowski
3370139745 USB: f_ncm: ncm_bitrate (speed) is unsigned
[  190.544755] configfs-gadget gadget: notify speed -44967296

This is because 4250000000 - 2**32 is -44967296.

Fixes: 9f6ce4240a ("usb: gadget: f_ncm.c added")
Cc: Brooke Basile <brookebasile@gmail.com>
Cc: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: Lorenzo Colitti <lorenzo@google.com>
Cc: Yauheni Kaliuta <yauheni.kaliuta@nokia.com>
Cc: Linux USB Mailing List <linux-usb@vger.kernel.org>
Acked-By: Lorenzo Colitti <lorenzo@google.com>
Signed-off-by: Maciej Żenczykowski <maze@google.com>
Cc: stable <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210608005344.3762668-1-zenczykowski@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:26:43 +02:00
Michael Kao
507b1b2812 arm64: dts: mt8183-kukui: Add tboard thermal zones
Add tboard thermal zones.
The tboard thermal sensors are a kind of NTC sensors which are located
on PCB board to correlate the temperature of the case (Tskin).

pull-up voltage: 1800 mv
pull-up resistor: 75K

Vsense = pull-up voltage * Rntc / ( pull-up resistor + Rntc )
AuxIn = Vsense * 4096 / 1500

Signed-off-by: Michael Kao <michael.kao@mediatek.com>
Signed-off-by: Ben Tseng <ben.tseng@mediatek.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>

Link: https://lore.kernel.org/r/20210604093755.13288-1-ben.tseng@mediatek.com
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-06-09 10:13:30 +02:00
Rui Miguel Silva
40d9e03f41 MAINTAINERS: usb: add entry for isp1760
Giving support for isp1763 made a little revival to this driver, add
entry in the MAINTAINERS file with me as maintainer.

Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org>
Link: https://lore.kernel.org/r/20210607170054.220975-1-rui.silva@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09 10:08:50 +02:00
Greg Kroah-Hartman
a39b7ba35d Two bug fixes for cdns3 and cdnsp
-----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEDaZUZmFxRG/wNThrSFkpgVDWcbsFAmC9dVwACgkQSFkpgVDW
 cbs+oAf/b4mVmJpYIMTBM5tU086YpsZ80StjH3MVx2Hx/F8bM2ewovOUxOWPAY2o
 A6ROuLUlU/0TT8U3LL5PEbQDHhuPsf1n3erv6iz63a72uzOouLeHOBYFP+E6aM5z
 1mkr2yHXpwFe+aHpstXvOgeR4ano0kzMkx/I3SPH6P8/pXiBSrpvTiBwnxqvZxbb
 VQuP9VfEF5e8vXuDiMF1V5qjea/BYnvjt2Yj34An3JHte13oTNRdFM/6aQiIEvt2
 r6g0nBJizmhIHwtNYq30KfgFsNjiC9+dPtOCOVyv80c+Qu+F71EwEyqZSrOVLunh
 hfxC/U6H8vy73Zo3gJP3xrXE+xvztw==
 =OpDk
 -----END PGP SIGNATURE-----

Merge tag 'usb-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb into usb-linus

Peter writes:

Two bug fixes for cdns3 and cdnsp

* tag 'usb-v5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/peter.chen/usb:
  usb: cdnsp: Fix deadlock issue in cdnsp_thread_irq_handler
  usb: cdns3: Enable TDL_CHK only for OUT ep
2021-06-09 10:05:01 +02:00
Greg Kroah-Hartman
1ca01c0805 USB-serial fixes for 5.13-rc5
Here's a fix for some pipe-direction mismatches in the quatech2 driver,
 and a couple of new device ids for ftdi_sio and omninet (and a related
 trivial cleanup).
 
 All but the ftdi_sio commit have been in linux-next, and with no
 reported issues.
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQQHbPq+cpGvN/peuzMLxc3C7H1lCAUCYLtSqwAKCRALxc3C7H1l
 CPj2AQDSM/GeQ658vxYKPIA+8ZDBWubaYhq8KAUDqxL7hBMevAEAkbFhjgtyQt4h
 32lqF2YsahxCHckvLXSnxxj1cTJxGAk=
 =NKr6
 -----END PGP SIGNATURE-----

Merge tag 'usb-serial-5.13-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-linus

Jonah writes:

USB-serial fixes for 5.13-rc5

Here's a fix for some pipe-direction mismatches in the quatech2 driver,
and a couple of new device ids for ftdi_sio and omninet (and a related
trivial cleanup).

All but the ftdi_sio commit have been in linux-next, and with no
reported issues.

* tag 'usb-serial-5.13-rc5' of https://git.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial:
  USB: serial: ftdi_sio: add NovaTech OrionMX product ID
  USB: serial: omninet: update driver description
  USB: serial: omninet: add device id for Zyxel Omni 56K Plus
  USB: serial: quatech2: fix control-request directions
2021-06-09 10:04:17 +02:00
Vandita Kulkarni
51317434e1 drm/i915/dsc: Fix bigjoiner check in dsc_disable
This change takes care of resetting the dss_ctl registers
in case of dsc_disable, bigjoiner disable and also
uncompressed joiner disable.

v2: Fix formatting
v3: Fix the typo (Mansi)

Suggested-by: Jani Nikula <jani.nikula@intel.com>
Fixes: d961eb20ad ("drm/i915/bigjoiner: atomic commit changes for uncompressed joiner")
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3537
Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210609065914.4454-1-vandita.kulkarni@intel.com
2021-06-09 13:20:07 +05:30
Andy Lutomirski
d8778e393a x86/fpu: Invalidate FPU state after a failed XRSTOR from a user buffer
Both Intel and AMD consider it to be architecturally valid for XRSTOR to
fail with #PF but nonetheless change the register state.  The actual
conditions under which this might occur are unclear [1], but it seems
plausible that this might be triggered if one sibling thread unmaps a page
and invalidates the shared TLB while another sibling thread is executing
XRSTOR on the page in question.

__fpu__restore_sig() can execute XRSTOR while the hardware registers
are preserved on behalf of a different victim task (using the
fpu_fpregs_owner_ctx mechanism), and, in theory, XRSTOR could fail but
modify the registers.

If this happens, then there is a window in which __fpu__restore_sig()
could schedule out and the victim task could schedule back in without
reloading its own FPU registers. This would result in part of the FPU
state that __fpu__restore_sig() was attempting to load leaking into the
victim task's user-visible state.

Invalidate preserved FPU registers on XRSTOR failure to prevent this
situation from corrupting any state.

[1] Frequent readers of the errata lists might imagine "complex
    microarchitectural conditions".

Fixes: 1d731e731c ("x86/fpu: Add a fastpath to __fpu__restore_sig()")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210608144345.758116583@linutronix.de
2021-06-09 09:49:38 +02:00
Ikjoon Jang
4fa8492d1e arm64: dts: mt8183: add cbas node under cros_ec
Add a 'cbas' device node for supporting tablet mode switch in
kukui devices.

Kukui platforms with detacheable base have an additional input
device under cros-ec, which reports SW_TABLET_MODE regarding
its base state (e.g. base flipped or detached).

Signed-off-by: Ikjoon Jang <ikjn@chromium.org>
Reviewed-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>

Link: https://lore.kernel.org/r/20210609032554.2443675-1-ikjn@chromium.org
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
2021-06-09 09:49:20 +02:00
Benjamin Gaignard
c55356c534 iommu: rockchip: Add support for iommu v2
This second version of the hardware block has a different bits
mapping for page table entries.
Add the ops matching to this new mapping.
Define a new compatible to distinguish it from the first version.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-5-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:48:36 +02:00
Benjamin Gaignard
227014b33f iommu: rockchip: Add internal ops to handle variants
Add internal ops to be able to handle incoming variant v2.
The goal is to keep the overall structure of the framework but
to allow to add the evolution of this hardware block.

The ops are global for a SoC because iommu domains are not
attached to a specific devices if they are for a virtuel device like
drm. Use a global variable shouldn't be since SoC usually doesn't
embedded different versions of the iommu hardware block.
If that happen one day a WARN_ON will be displayed at probe time.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-4-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:48:36 +02:00
Benjamin Gaignard
9e6f3cd589 dt-bindings: iommu: rockchip: Add compatible for v2
Add compatible for the second version of IOMMU hardware block.
RK356x IOMMU can also be link to a power domain.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-3-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:46:53 +02:00
Benjamin Gaignard
7e0fc5072e dt-bindings: iommu: rockchip: Convert IOMMU to DT schema
Convert Rockchip IOMMU to DT schema

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20210604164441.798362-2-benjamin.gaignard@collabora.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:46:53 +02:00
Zhen Lei
e86b041ffe iommu: Delete a duplicate check in iommu_change_dev_def_domain()
Function iommu_group_store_type() is the only caller of the static
function iommu_change_dev_def_domain() and has performed
"if (WARN_ON(!group))" detection before calling it. So the one here is
redundant.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Acked-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20210513075815.6382-1-thunder.leizhen@huawei.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
2021-06-09 09:43:17 +02:00
Florian Westphal
152bca0902 xfrm: remove description from xfrm_type struct
Its set but never read. Reduces size of xfrm_type to 64 bytes on 64bit.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
2021-06-09 09:38:52 +02:00
Thomas Gleixner
484cea4f36 x86/fpu: Prevent state corruption in __fpu__restore_sig()
The non-compacted slowpath uses __copy_from_user() and copies the entire
user buffer into the kernel buffer, verbatim.  This means that the kernel
buffer may now contain entirely invalid state on which XRSTOR will #GP.
validate_user_xstate_header() can detect some of that corruption, but that
leaves the onus on callers to clear the buffer.

Prior to XSAVES support, it was possible just to reinitialize the buffer,
completely, but with supervisor states that is not longer possible as the
buffer clearing code split got it backwards. Fixing that is possible but
not corrupting the state in the first place is more robust.

Avoid corruption of the kernel XSAVE buffer by using copy_user_to_xstate()
which validates the XSAVE header contents before copying the actual states
to the kernel. copy_user_to_xstate() was previously only called for
compacted-format kernel buffers, but it works for both compacted and
non-compacted forms.

Using it for the non-compacted form is slower because of multiple
__copy_from_user() operations, but that cost is less important than robust
code in an already slow path.

[ Changelog polished by Dave Hansen ]

Fixes: b860eb8dce ("x86/fpu/xstate: Define new functions for clearing fpregs and xstates")
Reported-by: syzbot+2067e764dbcd10721e2e@syzkaller.appspotmail.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Borislav Petkov <bp@suse.de>
Acked-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Rik van Riel <riel@surriel.com>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20210608144345.611833074@linutronix.de
2021-06-09 09:28:21 +02:00
Nirmoy Das
5b7a2c92b6 drm/vmwgfx: use ttm_bo_move_null() when there is nothing to move
Use ttm_bo_move_null() instead of ttm_bo_assign_mem().

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608181306.90008-1-nirmoy.das@amd.com
Signed-off-by: Christian König <christian.koenig@amd.com>
2021-06-09 09:10:22 +02:00
Colin Ian King
fbbf23ddb2 drm: qxl: ensure surf.data is ininitialized
The object surf is not fully initialized and the uninitialized
field surf.data is being copied by the call to qxl_bo_create
via the call to qxl_gem_object_create. Set surf.data to zero
to ensure garbage data from the stack is not being copied.

Addresses-Coverity: ("Uninitialized scalar variable")
Fixes: f64122c1f6 ("drm: add new QXL driver. (v1.4)")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210608161313.161922-1-colin.king@canonical.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-06-09 08:52:07 +02:00
Paolo Bonzini
4422829e80 kvm: fix previous commit for 32-bit builds
array_index_nospec does not work for uint64_t on 32-bit builds.
However, the size of a memory slot must be less than 20 bits wide
on those system, since the memory slot must fit in the user
address space.  So just store it in an unsigned long.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-09 01:49:13 -04:00
Gustavo A. R. Silva
7d2201d462 ima: Fix fall-through warning for Clang
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by explicitly adding a break statement instead
of just letting the code fall through to the next case.

Link: https://github.com/KSPP/linux/issues/115
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
2021-06-08 23:33:48 -04:00
gushengxian
2aa8eca6cb net: appletalk: fix some mistakes in grammar
Fix some mistakes in grammar.

Signed-off-by: gushengxian <gushengxian@yulong.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 19:27:57 -07:00
Baokun Li
dd8b865cc4 audit: Use list_move instead of list_del/list_add
Using list_move() instead of list_del() + list_add().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-06-08 22:18:35 -04:00
Aleksander Jan Bajkowski
f2386cf7c5 net: lantiq: disable interrupt before sheduling NAPI
This patch fixes TX hangs with threaded NAPI enabled. The scheduled
NAPI seems to be executed in parallel with the interrupt on second
thread. Sometimes it happens that ltq_dma_disable_irq() is executed
after xrx200_tx_housekeeping(). The symptom is that TX interrupts
are disabled in the DMA controller. As a result, the TX hangs after
a few seconds of the iperf test. Scheduling NAPI after disabling
interrupts fixes this issue.

Tested on Lantiq xRX200 (BT Home Hub 5A).

Fixes: 9423361da5 ("net: lantiq: Disable IRQs only if NAPI gets scheduled ")
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 19:16:32 -07:00
Sergey Nazarov
619ed58ac4 audit: Rename enum audit_state constants to avoid AUDIT_DISABLED redefinition
AUDIT_DISABLED defined in kernel/audit.h as element of enum audit_state
and redefined in kernel/audit.c. This produces a warning when kernel builds
with syscalls audit disabled and brokes kernel build if -Werror used.
enum audit_state used in syscall audit code only. This patch changes
enum audit_state constants prefix AUDIT to AUDIT_STATE to avoid
AUDIT_DISABLED redefinition.

Signed-off-by: Sergey Nazarov <s-nazarov@yandex.ru>
Acked-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
2021-06-08 22:05:24 -04:00
Fabrizio Castro
8929ef8d4d media: dt-bindings: media: renesas,drif: Fix fck definition
dt_binding_check reports the below error with the latest schema:

Documentation/devicetree/bindings/media/renesas,drif.yaml:
  properties:clock-names:maxItems: False schema does not allow 1
Documentation/devicetree/bindings/media/renesas,drif.yaml:
  ignoring, error in schema: properties: clock-names: maxItems

This patch fixes the problem.

Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210408202436.3706-1-fabrizio.castro.jz@renesas.com
2021-06-08 20:03:57 -05:00
Rob Herring
13542a69b9 dt-bindings: virtio: Convert virtio-mmio to DT schema
Convert the virtio-mmio binding to DT schema format.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: Jean-Philippe Brucker <jean-philippe@linaro.org>
Cc: virtualization@lists.linux-foundation.org
Acked-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210607193928.3092186-1-robh@kernel.org/
2021-06-08 20:02:45 -05:00
Rob Herring
bb718cad0a dt-bindings: rtc: Add Arm PL031 schema
The PL031 RTC binding has been in use for a long time, but never got
documented. Fortunately, it's simple and existing users are consistent.

Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: linux-rtc@vger.kernel.org
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210607193718.3090202-1-robh@kernel.org/
2021-06-08 20:01:38 -05:00
Luca Ceresoli
fc336ae622 clk: vc5: fix output disabling when enabling a FOD
On 5P49V6965, when an output is enabled we enable the corresponding
FOD. When this happens for the first time, and specifically when writing
register VC5_OUT_DIV_CONTROL in vc5_clk_out_prepare(), all other outputs
are stopped for a short time and then restarted.

According to Renesas support this is intended: "The reason for that is VC6E
has synced up all output function".

This behaviour can be disabled at least on VersaClock 6E devices, of which
only the 5P49V6965 is currently implemented by this driver. This requires
writing bit 7 (bypass_sync{1..4}) in register 0x20..0x50.  Those registers
are named "Unused Factory Reserved Register", and the bits are documented
as "Skip VDDO<N> verification", which does not clearly explain the relation
to FOD sync. However according to Renesas support as well as my testing
setting this bit does prevent disabling of all clock outputs when enabling
a FOD.

See "VersaClock ® 6E Family Register Descriptions and Programming Guide"
(August 30, 2018), Table 116 "Power Up VDD check", page 58:
https://www.renesas.com/us/en/document/mau/versaclock-6e-family-register-descriptions-and-programming-guide

Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Adam Ford <aford173@gmail.com>
Link: https://lore.kernel.org/r/20210527211647.1520720-1-luca@lucaceresoli.net
Fixes: 2bda748e6a ("clk: vc5: Add support for IDT VersaClock 5P49V6965")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08 17:53:17 -07:00
Dario Binacchi
0899431f95 clk: ti: add am33xx/am43xx spread spectrum clock support
The patch enables spread spectrum clocking (SSC) for MPU and LCD PLLs.
As reported by the TI spruh73x/spruhl7x RM, SSC is only supported for
the DISP/LCD and MPU PLLs on am33xx/am43xx. SSC is not supported for
DDR, PER, and CORE PLLs.

Calculating the required values and setting the registers accordingly
was taken from the set_mpu_spreadspectrum routine contained in the
arch/arm/mach-omap2/am33xx/clock_am33xx.c file of the u-boot project.

In locked condition, DPLL output clock = CLKINP *[M/N]. In case of
SSC enabled, the reference manual explains that there is a restriction
of range of M values. Since the omap2_dpll_round_rate routine attempts
to select the minimum possible N, the value of M obtained is not
guaranteed to be within the range required. With the new "ti,min-div"
parameter it is possible to increase N and consequently M to satisfy the
constraint imposed by SSC.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Tero Kristo <kristo@kernel.org>
Link: https://lore.kernel.org/r/20210606202253.31649-6-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08 17:49:16 -07:00
Dario Binacchi
2fdf0b888e ARM: dts: am43xx-clocks: add spread spectrum support
Registers for adjusting the spread spectrum clocking (SSC) have been
added. As reported by the TI spruhl7x RM, SSC is supported only for LCD
and MPU PLLs, but the PRCM_CM_SSC_DELTAMSTEP_DPLL_XXX and
PRCM_CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field
in the PRCM_CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE,
MPU, DDR, PER, DISP, EXTDEV).

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210606202253.31649-5-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08 17:49:16 -07:00
Dario Binacchi
a543293391 ARM: dts: am33xx-clocks: add spread spectrum support
Registers for adjusting the spread spectrum clocking (SSC) have been
added. As reported by the TI spruh73x RM, SSC is supported only for LCD
and MPU PLLs, but the CM_SSC_DELTAMSTEP_DPLL_XXX and
CM_SSC_MODFREQDIV_DPLL_XXX registers, as well as the enable field in the
CM_CLKMODE_DPLL_XXX registers are mapped for all PLLs (CORE, MPU, DDR,
PER, DISP).

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Acked-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20210606202253.31649-4-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08 17:49:16 -07:00
Dario Binacchi
4a8bc2644e dt-bindings: ti: dpll: add spread spectrum support
DT bindings for enabling and adjusting spread spectrum clocking have
been added.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210606202253.31649-3-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08 17:49:16 -07:00
Dario Binacchi
c255f15105 clk: ti: fix typo in routine description
Replace _omap3_noncore_dpll_program with omap3_noncore_dpll_program.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20210606202253.31649-2-dariobin@libero.it
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08 17:49:16 -07:00
Konrad Dybcio
2d32cd3315 clk: qcom: smd-rpm: Fix wrongly assigned RPM_SMD_PNOC_CLK
During my big cleanup I managed to assign an AO clock to its
non-AO binding. Fix this.

Reported-by: Bartosz Dudziak <bartosz.dudziak@snejp.pl>
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20210606192657.51037-1-konrad.dybcio@somainline.org
Fixes: a0384ecfe2 ("clk: qcom: smd-rpm: De-duplicate identical entries")
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2021-06-08 17:48:25 -07:00
Phil Sutter
cf6b5ffdce netfilter: nft_exthdr: Fix for unsafe packet data read
While iterating through an SCTP packet's chunks, skb_header_pointer() is
called for the minimum expected chunk header size. If (that part of) the
skbuff is non-linear, the following memcpy() may read data past
temporary buffer '_sch'. Use skb_copy_bits() instead which does the
right thing in this situation.

Fixes: 133dc203d7 ("netfilter: nft_exthdr: Support SCTP chunks")
Suggested-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Phil Sutter <phil@nwl.cc>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2021-06-09 02:42:52 +02:00
Vitaly Wool
ae3d69bcc4
riscv: fix typo in init.c
Commit 0106235682 introduced a typo in "__initdata" spelling
which led to build breakage for XIP. Fix that.

Fixes: 0106235682 ("riscv: mm: init: Consolidate vars, functions")
Signed-off-by: Vitaly Wool <vitaly.wool@konsulko.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-06-08 17:32:24 -07:00
Guo Ren
efcec32fe8
riscv: Cleanup unused functions
These functions haven't been used, so just remove them. The patch
has been tested with riscv.

Signed-off-by: Guo Ren <guoren@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Acked-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-06-08 17:17:55 -07:00
Dan Williams
54ada34b4d Merge branch 'rafael/acpica/cfmws' into for-5.14/cxl
Pick up the definition of the CXL Fixed Memory Window Structure from
Rafael's ACPICA development branch.
2021-06-08 17:16:11 -07:00
Kefeng Wang
5def4429ae
riscv: mm: Use better bitmap_zalloc()
Use better bitmap_zalloc() to allocate bitmap.

Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-06-08 17:12:30 -07:00
Bixuan Cui
ff76e3d7c3
riscv: fix build error when CONFIG_SMP is disabled
Fix build error when disable CONFIG_SMP:
mm/pgtable-generic.o: In function `.L19':
pgtable-generic.c:(.text+0x42): undefined reference to `flush_pmd_tlb_range'
mm/pgtable-generic.o: In function `pmdp_huge_clear_flush':
pgtable-generic.c:(.text+0x6c): undefined reference to `flush_pmd_tlb_range'
mm/pgtable-generic.o: In function `pmdp_invalidate':
pgtable-generic.c:(.text+0x162): undefined reference to `flush_pmd_tlb_range'

Fixes: e88b333142 ("riscv: mm: add THP support on 64-bit")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Acked-by: Nanyong Sun <sunnanyong@huawei.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
2021-06-08 17:05:03 -07:00
Yang Yingliang
3e5feb11a8 i3c: master: svc: fix doc warning in svc-i3c-master.c
Fix the following make W=1 warning:

  drivers/i3c/master/svc-i3c-master.c:207: warning: expecting prototype for struct svc_i3c_i3c_dev_data. Prototype was for struct svc_i3c_i2c_dev_data instead

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210602085544.4101980-1-yangyingliang@huawei.com
2021-06-09 02:02:45 +02:00
Yang Yingliang
59a61e69c4 i3c: master: svc: drop free_irq of devm_request_irq allocated irq
irq allocated with devm_request_irq() will be freed in devm_irq_release(),
using free_irq() in ->remove() will causes a dangling pointer, and a
subsequent double free. So remove the free_irq() in svc_i3c_master_remove().

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210602084935.3977636-1-yangyingliang@huawei.com
2021-06-09 02:02:22 +02:00
Matthew Hagan
e67f325e9c net: stmmac: explicitly deassert GMAC_AHB_RESET
We are currently assuming that GMAC_AHB_RESET will already be deasserted
by the bootloader. However if this has not been done, probing of the GMAC
will fail. To remedy this we must ensure GMAC_AHB_RESET has been deasserted
prior to probing.

v2 changes:
 - remove NULL condition check for stmmac_ahb_rst in stmmac_main.c
 - unwrap dev_err() message in stmmac_main.c
 - add PTR_ERR() around plat->stmmac_ahb_rst in stmmac_platform.c

v3 changes:
 - add error pointer to dev_err() output
 - add reset_control_assert(stmmac_ahb_rst) in stmmac_dvr_remove
 - revert PTR_ERR() around plat->stmmac_ahb_rst since this is performed
   on the returned value of ret by the calling function

Signed-off-by: Matthew Hagan <mnhagan88@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 16:42:12 -07:00
Shay Agroskin
504fd6a539 net: ena: fix DMA mapping function issues in XDP
This patch fixes several bugs found when (DMA/LLQ) mapping a packet for
transmission. The mapping procedure makes the transmitted packet
accessible by the device.
When using LLQ, this requires copying the packet's header to push header
(which would be passed to LLQ) and creating DMA mapping for the payload
(if the packet doesn't fit the maximum push length).
When not using LLQ, we map the whole packet with DMA.

The following bugs are fixed in the code:
    1. Add support for non-LLQ machines:
       The ena_xdp_tx_map_frame() function assumed that LLQ is
       supported, and never mapped the whole packet using DMA. On some
       instances, which don't support LLQ, this causes loss of traffic.

    2. Wrong DMA buffer length passed to device:
       When using LLQ, the first 'tx_max_header_size' bytes of the
       packet would be copied to push header. The rest of the packet
       would be copied to a DMA'd buffer.

    3. Freeing the XDP buffer twice in case of a mapping error:
       In case a buffer DMA mapping fails, the function uses
       xdp_return_frame_rx_napi() to free the RX buffer and returns from
       the function with an error. XDP frames that fail to xmit get
       freed by the kernel and so there is no need for this call.

Fixes: 548c4940b9 ("net: ena: Implement XDP_TX action")
Signed-off-by: Shay Agroskin <shayagr@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 16:41:02 -07:00
Yang Yingliang
52481e5859 sh_eth: Use devm_platform_get_and_ioremap_resource()
Use devm_platform_get_and_ioremap_resource() to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Reviewed-by: Sergei Shtylyov <sergei.shtylyov@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 16:38:03 -07:00
Yang Yingliang
5b38b97f40 net: nixge: simplify code with devm platform functions
Use devm_platform_get_and_ioremap_resource() and
devm_platform_ioremap_resource_byname to simplify
code.

Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 16:36:57 -07:00
Vladimir Oltean
de274be32c net: dsa: felix: set TX flow control according to the phylink_mac_link_up resolution
Instead of relying on the static initialization done by ocelot_init_port()
which enables flow control unconditionally, set SYS_PAUSE_CFG_PAUSE_ENA
according to the parameters negotiated by the PHY.

Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 16:35:14 -07:00
Vladimir Oltean
1650bdb1c5 net: dsa: felix: re-enable TX flow control in ocelot_port_flush()
Because flow control is set up statically in ocelot_init_port(), and not
in phylink_mac_link_up(), what happens is that after the blamed commit,
the flow control remains disabled after the port flushing procedure.

Fixes: eb4733d7cf ("net: dsa: felix: implement port flushing on .phylink_mac_link_down")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-06-08 16:34:23 -07:00