Commit graph

1,031,458 commits

Author SHA1 Message Date
Zhigang Luo
488b83f4d5 drm/amdgpu: remove sriov vf mmhub system aperture and fb location programming
host driver programmed mmhub system aperture and fb location for vf, no
need to program in guest side.

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:15:01 -04:00
Zhigang Luo
95066fd5d2 drm/amdgpu: remove sriov vf gfxhub fb location programming
host driver programmed the gfxhub fb location for vf, no need to
program in guest side.

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:14:55 -04:00
Zhigang Luo
adbe2e3d34 drm/amdgpu: remove sriov vf checking from getting fb location
host driver programmed fb location registers for vf, no need to
check anymore.

Signed-off-by: Zhigang Luo <zhigang.luo@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Reviewed-By : Shaoyun.liu <shaoyunl@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:14:36 -04:00
Xiaomeng Hou
2b517bd183 drm/amd/pm: fix warning reported by kernel test robot
Kernel test robot throws warning ->

>> drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:483:2:
   warning: variable 'member_type' is used uninitialized whenever switch
   default is taken [-Wsometimes-uninitialized]
       default:
       ^~~~~~~
   drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:487:47:
   note: uninitialized use occurs here
       return yellow_carp_get_smu_metrics_data(smu, member_type, value);
                               ^~~~~~~~~~~
   drivers/gpu/drm/amd/amdgpu/../pm/swsmu/smu13/yellow_carp_ppt.c:465:2:
   note: variable 'member_type' is declared here
       MetricsMember_t member_type;
       ^
   1 warning generated.

Fix this warning by return errno when the clk type is unsupported.

Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Xiaomeng Hou <Xiaomeng.Hou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:14:29 -04:00
Nirmoy Das
6ceba306c0 drm/amdgpu: fix shadow bo skip condition
Create shadow BOs only for no-compute VM context and only for dGPU.
The existing if-condition would create shadow bo for compute context
on dGPU which not what we wanted.

Signed-off-by: Nirmoy Das <nirmoy.das@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:14:18 -04:00
Darren Powell
90a681c5e4 amdgpu/pm: add kernel documentation for smu_get_power_limit
added doc tag "amdgpu_pp_power" with description
 added tags for enums  pp_power_limit_level, pp_power_type
 added tag for function smu_get_power_limit

Test:
* Temporary insertion into Documentation/gpu/amdgpu.rst
------------START------------
Power Limit
-----------
.. kernel-doc:: drivers/gpu/drm/amd/include/kgd_pp_interface.h
   :doc: amdgpu_pp_power

.. kernel-doc:: drivers/gpu/drm/amd/include/kgd_pp_interface.h
   :identifiers: pp_power_limit_level

.. kernel-doc:: drivers/gpu/drm/amd/include/kgd_pp_interface.h
   :identifiers: pp_power_type

.. kernel-doc:: drivers/gpu/drm/amd/pm/swsmu/amdgpu_smu.c
   :identifiers: smu_get_power_limit
-------------END-------------

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:14:11 -04:00
Darren Powell
dc2a8240b2 amdgpu/pm: handle return value for get_power_limit
Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:14:03 -04:00
Darren Powell
4f9cbeb317 amdgpu/pm: modify and add smu_get_power_limit to Powerplay API
modify args of smu_get_power_limit to match Powerplay API .get_power_limit
 add smu_get_power_limit to Powerplay API swsmu_pm_funcs
 remove special handling of smu in amdgpu_hwmon_show_power_cap*

* Test
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 11`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display" ; \
 echo "=== power1 cap ===" ; cat $HWMON_DIR/power1_cap ;           \
 echo "=== power1 cap max ===" ; cat $HWMON_DIR/power1_cap_max ;   \
 echo "=== power1 cap def ===" ; cat $HWMON_DIR/power1_cap_default

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:13:56 -04:00
Darren Powell
04bec52127 amdgpu/pm: modify Powerplay API get_power_limit to use new pp_power enums
updated {amd_pm_funcs}->get_power_limit() signature
 rewrote pp_get_power_limit to use new enums
 pp_get_power_limit now returns -EOPNOTSUPP for unknown power limit
 update calls to {amd_pm_funcs}->get_power_limit()

* Test Notes
* testing hardware was NAVI10 (tests SMU path)
** needs testing on VANGOGH
** needs testing on SMU < 11
** ie, one of
 TOPAZ, FIJI, TONGA, POLARIS10, POLARIS11, POLARIS12, VEGAM, CARRIZO,
 STONEY, VEGA10, VEGA12,VEGA20, RAVEN, BONAIRE, HAWAII

* Test
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 11`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display" ; \
 echo "=== power1 cap ===" ; cat $HWMON_DIR/power1_cap ;           \
 echo "=== power1 cap max ===" ; cat $HWMON_DIR/power1_cap_max ;   \
 echo "=== power1 cap def ===" ; cat $HWMON_DIR/power1_cap_default

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:13:49 -04:00
Darren Powell
a40a020de2 amdgpu/pm: clean up smu_get_power_limit function signature
add two new powerplay enums (limit_level, type)
 add enums to smu_get_power_limit signature
 remove input bitfield stuffing of output variable limit
 update calls to smu_get_power_limit

* Test
 AMDGPU_PCI_ADDR=`lspci -nn | grep "VGA\|Display" | cut -d " " -f 1`
 AMDGPU_HWMON=`ls -la /sys/class/hwmon | grep $AMDGPU_PCI_ADDR | cut -d " " -f 11`
 HWMON_DIR=/sys/class/hwmon/${AMDGPU_HWMON}

 lspci -nn | grep "VGA\|Display" ; \
 echo "=== power1 cap ===" ; cat $HWMON_DIR/power1_cap ;           \
 echo "=== power1 cap max ===" ; cat $HWMON_DIR/power1_cap_max ;   \
 echo "=== power1 cap def ===" ; cat $HWMON_DIR/power1_cap_default

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:13:40 -04:00
Darren Powell
cef85a40be amdgpu/pm: reorder definition of swsmu_pm_funcs for readability
Match the order of definition to the structure's declaration to
help with locating included and missing functions of the API

Signed-off-by: Darren Powell <darren.powell@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-06-08 12:13:25 -04:00
Darrick J. Wong
c3eabd3650 xfs: initial agnumber -> perag conversions for shrink
If we want to use active references to the perag to be able to gate
 shrink removing AGs and hence perags safely, we've got a fair bit of
 work to do actually use perags in all the places we need to.
 
 There's a lot of code that iterates ag numbers and then
 looks up perags from that, often multiple times for the same perag
 in the one operation. If we want to use reference counted perags for
 access control, then we need to convert all these uses to perag
 iterators, not agno iterators.
 
 [Patches 1-4]
 
 The first step of this is consolidating all the perag management -
 init, free, get, put, etc into a common location. THis is spread all
 over the place right now, so move it all into libxfs/xfs_ag.[ch].
 This does expose kernel only bits of the perag to libxfs and hence
 userspace, so the structures and code is rearranged to minimise the
 number of ifdefs that need to be added to the userspace codebase.
 The perag iterator in xfs_icache.c is promoted to a first class API
 and expanded to the needs of the code as required.
 
 [Patches 5-10]
 
 These are the first basic perag iterator conversions and changes to
 pass the perag down the stack from those iterators where
 appropriate. A lot of this is obvious, simple changes, though in
 some places we stop passing the perag down the stack because the
 code enters into an as yet unconverted subsystem that still uses raw
 AGs.
 
 [Patches 11-16]
 
 These replace the agno passed in the btree cursor for per-ag btree
 operations with a perag that is passed to the cursor init function.
 The cursor takes it's own reference to the perag, and the reference
 is dropped when the cursor is deleted. Hence we get reference
 coverage for the entire time the cursor is active, even if the code
 that initialised the cursor drops it's reference before the cursor
 or any of it's children (duplicates) have been deleted.
 
 The first patch adds the perag infrastructure for the cursor, the
 next four patches convert a btree cursor at a time, and the last
 removes the agno from the cursor once it is unused.
 
 [Patches 17-21]
 
 These patches are a demonstration of the simplifications and
 cleanups that come from plumbing the perag through interfaces that
 select and then operate on a specific AG. In this case the inode
 allocation algorithm does up to three walks across all AGs before it
 either allocates an inode or fails. Two of these walks are purely
 just to select the AG, and even then it doesn't guarantee inode
 allocation success so there's a third walk if the selected AG
 allocation fails.
 
 These patches collapse the selection and allocation into a single
 loop, simplifies the error handling because xfs_dir_ialloc() always
 returns ENOSPC if no AG was selected for inode allocation or we fail
 to allocate an inode in any AG, gets rid of xfs_dir_ialloc()
 wrapper, converts inode allocation to run entirely from a single
 perag instance, and then factors xfs_dialloc() into a much, much
 simpler loop which is easy to understand.
 
 Hence we end up with the same inode allocation logic, but it only
 needs two complete iterations at worst, makes AG selection and
 allocation atomic w.r.t. shrink and chops out out over 100 lines of
 code from this hot code path.
 
 [Patch 22]
 
 Converts the unlink path to pass perags through it.
 
 There's more conversion work to be done, but this patchset gets
 through a large chunk of it in one hit. Most of the iterators are
 converted, so once this is solidified we can move on to converting
 these to active references for being able to free perags while the
 fs is still active.
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEmJOoJ8GffZYWSjj/regpR/R1+h0FAmC3HUgUHGRhdmlkQGZy
 b21vcmJpdC5jb20ACgkQregpR/R1+h2yaw/+P0JzpI+6n06Ei00mjgE/Du/WhMLi
 0JQ93Grlj+miuGGT9DgGCiRpoZnefhEk+BH6JqoEw1DQ3T5ilmAzrHLUUHSQC3+S
 dv85sJduheQ6yHuoO+4MzkaSq6JWKe7E9gZwAsVyBul5aSjdmaJaQdPwYMTXSXo0
 5Uqq8ECFkMcaHVNjcBfasgR/fdyWy2Qe4PFTHTHdQpd+DNZ9UXgFKHW2og+1iry/
 zDIvdIppJULA09TvVcZuFjd/1NzHQ/fLj5PAzz8GwagB4nz2x3s78Zevmo5yW/jK
 3/+50vXa8ldhiHDYGTS3QXvS0xJRyqUyD47eyWOOiojZw735jEvAlCgjX6+0X1HC
 k3gCkQLv8l96fRkvUpgnLf/fjrUnlCuNBkm9d1Eq2Tied8dvLDtiEzoC6L05Nqob
 yd/nIUb1zwJFa9tsoheHhn0bblTGX1+zP0lbRJBje0LotpNO9DjGX5JoIK4GR7F8
 y1VojcdgRI14HlxUnbF3p8wmQByN+M2tnp6GSdv9BA65bjqi05Rj/steFdZHBV6x
 wiRs8Yh6BTvMwKgufHhRQHfRahjNHQ/T/vOE+zNbWqemS9wtEUDop+KvPhC36R/k
 o/cmr23cF8ESX2eChk7XM4On3VEYpcvp2zSFgrFqZYl6RWOwEis3Htvce3KuSTPp
 8Xq70te0gr2DVUU=
 =YNzW
 -----END PGP SIGNATURE-----

Merge tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2

xfs: initial agnumber -> perag conversions for shrink

If we want to use active references to the perag to be able to gate
shrink removing AGs and hence perags safely, we've got a fair bit of
work to do actually use perags in all the places we need to.

There's a lot of code that iterates ag numbers and then
looks up perags from that, often multiple times for the same perag
in the one operation. If we want to use reference counted perags for
access control, then we need to convert all these uses to perag
iterators, not agno iterators.

[Patches 1-4]

The first step of this is consolidating all the perag management -
init, free, get, put, etc into a common location. THis is spread all
over the place right now, so move it all into libxfs/xfs_ag.[ch].
This does expose kernel only bits of the perag to libxfs and hence
userspace, so the structures and code is rearranged to minimise the
number of ifdefs that need to be added to the userspace codebase.
The perag iterator in xfs_icache.c is promoted to a first class API
and expanded to the needs of the code as required.

[Patches 5-10]

These are the first basic perag iterator conversions and changes to
pass the perag down the stack from those iterators where
appropriate. A lot of this is obvious, simple changes, though in
some places we stop passing the perag down the stack because the
code enters into an as yet unconverted subsystem that still uses raw
AGs.

[Patches 11-16]

These replace the agno passed in the btree cursor for per-ag btree
operations with a perag that is passed to the cursor init function.
The cursor takes it's own reference to the perag, and the reference
is dropped when the cursor is deleted. Hence we get reference
coverage for the entire time the cursor is active, even if the code
that initialised the cursor drops it's reference before the cursor
or any of it's children (duplicates) have been deleted.

The first patch adds the perag infrastructure for the cursor, the
next four patches convert a btree cursor at a time, and the last
removes the agno from the cursor once it is unused.

[Patches 17-21]

These patches are a demonstration of the simplifications and
cleanups that come from plumbing the perag through interfaces that
select and then operate on a specific AG. In this case the inode
allocation algorithm does up to three walks across all AGs before it
either allocates an inode or fails. Two of these walks are purely
just to select the AG, and even then it doesn't guarantee inode
allocation success so there's a third walk if the selected AG
allocation fails.

These patches collapse the selection and allocation into a single
loop, simplifies the error handling because xfs_dir_ialloc() always
returns ENOSPC if no AG was selected for inode allocation or we fail
to allocate an inode in any AG, gets rid of xfs_dir_ialloc()
wrapper, converts inode allocation to run entirely from a single
perag instance, and then factors xfs_dialloc() into a much, much
simpler loop which is easy to understand.

Hence we end up with the same inode allocation logic, but it only
needs two complete iterations at worst, makes AG selection and
allocation atomic w.r.t. shrink and chops out out over 100 lines of
code from this hot code path.

[Patch 22]

Converts the unlink path to pass perags through it.

There's more conversion work to be done, but this patchset gets
through a large chunk of it in one hit. Most of the iterators are
converted, so once this is solidified we can move on to converting
these to active references for being able to free perags while the
fs is still active.

* tag 'xfs-perag-conv-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs: (23 commits)
  xfs: remove xfs_perag_t
  xfs: use perag through unlink processing
  xfs: clean up and simplify xfs_dialloc()
  xfs: inode allocation can use a single perag instance
  xfs: get rid of xfs_dir_ialloc()
  xfs: collapse AG selection for inode allocation
  xfs: simplify xfs_dialloc_select_ag() return values
  xfs: remove agno from btree cursor
  xfs: use perag for ialloc btree cursors
  xfs: convert allocbt cursors to use perags
  xfs: convert refcount btree cursor to use perags
  xfs: convert rmap btree cursor to using a perag
  xfs: add a perag to the btree cursor
  xfs: pass perags around in fsmap data dev functions
  xfs: push perags through the ag reservation callouts
  xfs: pass perags through to the busy extent code
  xfs: convert secondary superblock walk to use perags
  xfs: convert xfs_iwalk to use perag references
  xfs: convert raw ag walks to use for_each_perag
  xfs: make for_each_perag... a first class citizen
  ...
2021-06-08 09:13:13 -07:00
Darrick J. Wong
ebf2e33723 xfs: buffer cache bulk page allocation
This patchset makes use of the new bulk page allocation interface to
 reduce the overhead of allocating large numbers of pages in a
 loop.
 
 The first two patches are refactoring buffer memory allocation and
 converting the uncached buffer path to use the same page allocation
 path, followed by converting the page allocation path to use bulk
 allocation.
 
 The rest of the patches are then consolidation of the page
 allocation and freeing code to simplify the code and remove a chunk
 of unnecessary abstraction. This is largely based on a series of
 changes made by Christoph Hellwig.
 -----BEGIN PGP SIGNATURE-----
 
 iQJIBAABCgAyFiEEmJOoJ8GffZYWSjj/regpR/R1+h0FAmC+6OwUHGRhdmlkQGZy
 b21vcmJpdC5jb20ACgkQregpR/R1+h21QQ/8C0f7wq1OKwNI2oRubf6J8jtttiRS
 SD2TA03AP2OIOKx4y2G0h0dJeX9tgnbLerIlpfT80nHDoBgKHbZCYSEHQT0DscYo
 fuwQTVR8RCklKspjUlCGR+Gbm6vI8HakK1lAppw168e4c6t8wX1KiSibwaVTQdaZ
 NaXUqTUzGiNq+iiLS6fW3mJ3PKWFJYyrDOSR2jIPbUGIJdejRCGe0xVnu+hIsz+y
 c2gSGCB+j3cYaazhlJTDYPGja3Wq3eR+Ya9i1GcA1tJiJLsu0ZjaVQ69Bl4dud2F
 c3OyhFK0El1VMSEVb3hY8gTpAO02jNWSnB2Zlidt0h4ZJVAxKus0xe2w3eS4uST2
 hcMI3lwjdzRQuoBwOgXQ+CpYVv2wI8HPNLTSR+NYcC2IZaCNieFRWdTYwXrAJBB3
 H09m04GT/7TkkrYHFD1zRtIedP4DZ6MZn/33bufNxEt1NRCFw5AFAEUFfjDA317A
 4nByCmU6XjmmpI/XLixwu0BYCfKVB4UsrgOyzXBy7ZU0+pIser+ynP1V4d9Bb43Y
 xVQ8S0QirT7gqXjx75mD4B4qkXZ5nrz5Z7fSn6YU4TwqsYtZYlsBauLlWmmHp9MT
 CP4PA4j+CQORhfZzWXw2ViXYGoIssc1cw5i4JB6a4u/OaDi19dYkE6SO8P3b9GSm
 khHqWgcTC4VGpmc=
 =JsrV
 -----END PGP SIGNATURE-----

Merge tag 'xfs-buf-bulk-alloc-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs into xfs-5.14-merge2

xfs: buffer cache bulk page allocation

This patchset makes use of the new bulk page allocation interface to
reduce the overhead of allocating large numbers of pages in a
loop.

The first two patches are refactoring buffer memory allocation and
converting the uncached buffer path to use the same page allocation
path, followed by converting the page allocation path to use bulk
allocation.

The rest of the patches are then consolidation of the page
allocation and freeing code to simplify the code and remove a chunk
of unnecessary abstraction. This is largely based on a series of
changes made by Christoph Hellwig.

* tag 'xfs-buf-bulk-alloc-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: merge xfs_buf_allocate_memory
  xfs: cleanup error handling in xfs_buf_get_map
  xfs: get rid of xb_to_gfp()
  xfs: simplify the b_page_count calculation
  xfs: remove ->b_offset handling for page backed buffers
  xfs: move page freeing into _xfs_buf_free_pages()
  xfs: merge _xfs_buf_get_pages()
  xfs: use alloc_pages_bulk_array() for buffers
  xfs: use xfs_buf_alloc_pages for uncached buffers
  xfs: split up xfs_buf_allocate_memory
2021-06-08 09:10:01 -07:00
Sudeep Holla
61832b35b4 firmware: arm_scmi: Avoid multiple initialisations of hdr->protocol_id
Since the hdr->protocol_id is set from the scmi_protocol_instance handle
just before the transfer, there is no need to initialise the same in
scmi_xfer_get_init. Remove the unnecessary initialisations.

Link: https://lore.kernel.org/r/20210608140140.2042257-1-sudeep.holla@arm.com
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-08 16:06:12 +01:00
Maxime Ripard
366b45b974
ASoC: hdmi-codec: Rework to support more controls
We're going to add more controls to support the IEC958 output, so let's
rework the control registration a bit to support more of them.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Acked-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210525132354.297468-4-maxime@cerno.tech
2021-06-08 17:05:47 +02:00
Maxime Ripard
9eafc11f92
ALSA: iec958: Split status creation and fill
In some situations, like a codec probe, we need to provide an IEC status
default but don't have access to the sampling rate and width yet since
no stream has been configured yet.

Each and every driver has its own default, whereas the core iec958 code
also has some buried in the snd_pcm_create_iec958_consumer functions.

Let's split these functions in two to provide a default that doesn't
rely on the sampling rate and width, and another function to fill them
when available.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210525132354.297468-3-maxime@cerno.tech
2021-06-08 17:05:41 +02:00
Maxime Ripard
aa7899537a
ALSA: doc: Clarify IEC958 controls iface
The doc currently mentions that the IEC958 Playback Default should be
exposed on the PCM iface, and the Playback Mask on the mixer iface.

It's a bit confusing to advise to have two related controls on two
separate ifaces, and it looks like the drivers that currently expose
those controls use any combination of the mixer and PCM ifaces.

Let's try to clarify the situation a bit, and encourage to at least have
the controls on the same iface.

Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20210525132354.297468-2-maxime@cerno.tech
2021-06-08 17:05:33 +02:00
Cristian Marussi
e30d91d4ff firmware: arm_scmi: Move reinit_completion from scmi_xfer_get to do_xfer
Re-using timed out xfers in a loop can lead to issue if completion was
not properly reinitialized. Move reinit_completion from scmi_xfer_get to
do_xfer to avoid the issue.

Link: https://lore.kernel.org/r/20210606221232.33768-3-cristian.marussi@arm.com
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
[sudeep.holla: moved reinit_completion instead of adding another one]
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-08 16:04:54 +01:00
Mark Rutland
8a11e84b80
drm/vc4: fix vc4_atomic_commit_tail() logic
In vc4_atomic_commit_tail() we iterate of the set of old CRTCs, and
attempt to wait on any channels which are still in use. When we iterate
over the CRTCs, we have:

* `i` - the index of the CRTC
* `channel` - the channel a CRTC is using

When we check the channel state, we consult:

  old_hvs_state->fifo_state[channel].in_use

... but when we wait for the channel, we erroneously wait on:

  old_hvs_state->fifo_state[i].pending_commit

... rather than:

   old_hvs_state->fifo_state[channel].pending_commit

... and this bogus access has been observed to result in boot-time hangs
on some arm64 configurations, and can be detected using KASAN. FIx this
by using the correct index.

I've tested this on a Raspberry Pi 3 model B v1.2 with KASAN.

Trimmed KASAN splat:

| ==================================================================
| BUG: KASAN: slab-out-of-bounds in vc4_atomic_commit_tail+0x1cc/0x910
| Read of size 8 at addr ffff000007360440 by task kworker/u8:0/7
| CPU: 2 PID: 7 Comm: kworker/u8:0 Not tainted 5.13.0-rc3-00009-g694c523e7267 #3
|
| Hardware name: Raspberry Pi 3 Model B (DT)
| Workqueue: events_unbound deferred_probe_work_func
| Call trace:
|  dump_backtrace+0x0/0x2b4
|  show_stack+0x1c/0x30
|  dump_stack+0xfc/0x168
|  print_address_description.constprop.0+0x2c/0x2c0
|  kasan_report+0x1dc/0x240
|  __asan_load8+0x98/0xd4
|  vc4_atomic_commit_tail+0x1cc/0x910
|  commit_tail+0x100/0x210
| ...
|
| Allocated by task 7:
|  kasan_save_stack+0x2c/0x60
|  __kasan_kmalloc+0x90/0xb4
|  vc4_hvs_channels_duplicate_state+0x60/0x1a0
|  drm_atomic_get_private_obj_state+0x144/0x230
|  vc4_atomic_check+0x40/0x73c
|  drm_atomic_check_only+0x998/0xe60
|  drm_atomic_commit+0x34/0x94
|  drm_client_modeset_commit_atomic+0x2f4/0x3a0
|  drm_client_modeset_commit_locked+0x8c/0x230
|  drm_client_modeset_commit+0x38/0x60
|  drm_fb_helper_set_par+0x104/0x17c
|  fbcon_init+0x43c/0x970
|  visual_init+0x14c/0x1e4
| ...
|
| The buggy address belongs to the object at ffff000007360400
|  which belongs to the cache kmalloc-128 of size 128
| The buggy address is located 64 bytes inside of
|  128-byte region [ffff000007360400, ffff000007360480)
| The buggy address belongs to the page:
| page:(____ptrval____) refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x7360
| flags: 0x3fffc0000000200(slab|node=0|zone=0|lastcpupid=0xffff)
| raw: 03fffc0000000200 dead000000000100 dead000000000122 ffff000004c02300
| raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000
| page dumped because: kasan: bad access detected
|
| Memory state around the buggy address:
|  ffff000007360300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
|  ffff000007360380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
| >ffff000007360400: 00 00 00 00 00 00 00 fc fc fc fc fc fc fc fc fc
|                                            ^
|  ffff000007360480: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
|  ffff000007360500: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
| ==================================================================

Link: https://lore.kernel.org/r/4d0c8318-bad8-2be7-e292-fc8f70c198de@samsung.com
Link: https://lore.kernel.org/linux-arm-kernel/20210607151740.moncryl5zv3ahq4s@gilmour
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Cc: Emma Anholt <emma@anholt.net>
Cc: Maxime Ripard <maxime@cerno.tech>
Cc: Will Deacon <will@kernel.org>
Cc: dri-devel@lists.freedesktop.org
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210608085513.2069-1-mark.rutland@arm.com
2021-06-08 17:02:17 +02:00
Arnd Bergmann
5617c9125b clkdev: remove unused clkdev_alloc() interfaces
The last user of clkdev_alloc() and clkdev_hw_alloc() was
removed last year, so everything now calls clkdev_create()
and clkdev_hw_create() instead.

Removing the unused functions lets the compiler optimize
the remaining ones slightly better.

Fixes: e5006671ac ("clk: versatile: Drop the legacy IM-PD1 clock code")
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08 17:00:09 +02:00
Arnd Bergmann
2f4574dd6d clkdev: remove CONFIG_CLKDEV_LOOKUP
This option is now synonymous with CONFIG_HAVE_CLK, so use
the latter globally. Any out-of-tree platform ports that
still use a private clk_get()/clk_put() implementation should
move to CONFIG_COMMON_CLK.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08 17:00:09 +02:00
Arnd Bergmann
007f84ede6 m68k: coldfire: remove private clk_get/clk_put
Only three SoCs remain that use the custom clk_get/clk_put.
Move these over to clkdev_lookup tables as well. As before,
treat the "sys.0" and "pll.0" clocks as system-wide clocks,
and all the other ones as device specific.

The "name" field in 'struct clock' is now unused, so rename
that as well as a cleanup and to reduce the object code size.
The DEFINE_CLK macro could be changed the same way, but it
is less churn to just leave those in place, that can be
done as a follow-up later if someone is interested.

Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08 17:00:09 +02:00
Arnd Bergmann
63aadb7766 m68k: coldfire: use clkdev_lookup on most coldfire
Coldfire is now the only target that implements the clk_get()/clk_put()
helpers itself rather than using the common implementation.

Most coldfire variants only have two distinct clocks and use the clk
code purely for lookup. Change those over to use clkdev_lookup instead
but leave the custom clk interface for those two clocks.

Also leave the four SoCs that have gated clocks.

Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Tested-by: Greg Ungerer <gerg@linux-m68k.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08 17:00:09 +02:00
Arnd Bergmann
35f752be4f mips: ralink: convert to CONFIG_COMMON_CLK
ralink only has a very trivial clock implementation, with everything
being fixed clocks.

Convert it to CONFIG_COMMON_CLK to reduce the number of platforms
that rely on legacy clocks. Of course, the clocks really should
be read from the device tree instead, but this is a step into that
direction.

This adds about 50KB to the kernel image size, which is an unfortunate
increase, but not as bad as I had feared:

   text	   data	    bss	    dec	    hex	filename
3778560	1582216	  92256	5453032	 5334e8	vmlinux-vocore-before
3822148	1601192	  92304	5515644	 54297c	vmlinux-vocore-after
3870226	1644468	 200192	5714886	 5733c6	vmlinux-rt305x-before
3916727	1668404	 200240	5785371	 58471b	vmlinux-rt305x-after

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08 17:00:09 +02:00
Arnd Bergmann
b408b611eb mips: ar7: convert to CONFIG_COMMON_CLK
Perform a minimal conversion of the ar7 clock implementation to the common
clock framework. While the hardware can control the rates, this is left
unchanged, and all clocks are registered as fixed-rate or fixed-divider
clocks. Similarly, the clkdev lookup information is left unchanged but
moved from the table format into individual allocations.

There is a small increase in code size:

   text	   data	    bss	    dec	    hex	filename
4757116	 596640	  91328	5445084	 5315dc	vmlinux-before
4806159	 602360	  91344	5499863	 53ebd7	vmlinux-after

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08 17:00:09 +02:00
Arnd Bergmann
4410c4236e mips: ar7: convert to clkdev_lookup
ar7 is one of only two platforms that provide the clock interface but
implement a custom version of the clkdev_lookup code.

Change this to use the generic version instead.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-06-08 17:00:08 +02:00
Takashi Iwai
a0309c3448 ASoC: Fixes for v5.13
A collection of fixes and device ID updates that have come up in the
 past few -rcs, none of which stand out particularly.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmC/aSwACgkQJNaLcl1U
 h9DNXAf+O+fzbVOkXxp/r3yUa2VF0Zdit0R8xIcUh0k7vd+MqYECaGaKqX9sAKbn
 nQFNvzcdRjkiFFgmKpy6x2kJ/OXBJbRCvC5FfAAj2cJvzw4eN03wkqaa9JuEZX1e
 uJ+Ny1PELMglHqmWNC9bWnudEJoaYxpssI14u+FjOWJPzIxXSxWSGQknIG4d8/Rh
 BtifoTxWxsYIbKiiNhX6Ui5zdzRl5CeTLuKoKXBQRM0ivRwPuX0Y+VW/tsNiLUBT
 yN/CEEuu+GZevdHRvWEW3FwK8y7W36gueEYe7o+SFQVgyyjESnhCRdhRvo7uvzrx
 e1yVEe4ky0wbyhmBR+69SugYKqd1/A==
 =tHOl
 -----END PGP SIGNATURE-----

Merge tag 'asoc-fix-v5.13-rc4' of https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus

ASoC: Fixes for v5.13

A collection of fixes and device ID updates that have come up in the
past few -rcs, none of which stand out particularly.
2021-06-08 16:59:19 +02:00
Kishon Vijay Abraham I
c90ec93d94 arm64: dts: ti: k3-am642-sk: Disable PCIe
AM642-SK has no PCIe slot. Disable it here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-6-kishon@ti.com
2021-06-08 09:32:38 -05:00
Kishon Vijay Abraham I
4e8aa4e355 arm64: dts: ti: k3-am642-sk: Enable USB Super-Speed HOST port
Enable USB Super-Speed HOST port.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Aswath Govindraju <a-govindraju@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-5-kishon@ti.com
2021-06-08 09:32:38 -05:00
Kishon Vijay Abraham I
354065bed2 arm64: dts: ti: k3-am642-evm: Enable PCIe and SERDES
AM642 EVM has a x4 lane PCIe connector. Enable PCIe in RC mode here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-4-kishon@ti.com
2021-06-08 09:32:38 -05:00
Kishon Vijay Abraham I
4a868bffd8 arm64: dts: ti: k3-am64-main: Add PCIe DT node
AM64 has one PCIe instance which can be configured in either
host mode (RC) or device mode (EP). Add PCIe DT node for host
mode and device mode here.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-3-kishon@ti.com
2021-06-08 09:32:38 -05:00
Kishon Vijay Abraham I
68fefbfed8 arm64: dts: ti: k3-am64-main: Add SERDES DT node
AM64 has one SERDES 10G instance. Add SERDES DT node for it.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603142251.14563-2-kishon@ti.com
2021-06-08 09:32:38 -05:00
Kishon Vijay Abraham I
02b4d91861 arm64: dts: ti: k3-j721e-common-proc-board: Re-name "link" name as "phy"
Commit 66db854b1f ("arm64: dts: ti: k3-j721e-common-proc-board:
Configure the PCIe instances") and
commit 02c35dca2b ("arm64: dts: ti: k3-j721e: Enable Super-Speed
support for USB0") added PHY DT nodes with node name as "link"
However nodes with #phy-cells should be named 'phy' as discussed in [1].
Re-name subnodes of serdes in J721E to 'phy'.

[1] -> http://lore.kernel.org/r/20200909203631.GA3026331@bogus

Fixes: 66db854b1f ("arm64: dts: ti: k3-j721e-common-proc-board: Configure the PCIe instances")
Fixes: 02c35dca2b ("arm64: dts: ti: k3-j721e: Enable Super-Speed support for USB0")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-5-kishon@ti.com
2021-06-08 09:32:31 -05:00
Kishon Vijay Abraham I
f2a7657ad7 arm64: dts: ti: k3-j721e-common-proc-board: Use external clock for SERDES
Use external clock for all the SERDES used by PCIe controller. This will
make the same clock used by the local SERDES as well as the clock
provided to the PCIe connector.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-4-kishon@ti.com
2021-06-08 09:32:31 -05:00
Kishon Vijay Abraham I
2427bfb335 arm64: dts: ti: k3-j721e-main: Add #clock-cells property to serdes DT node
Add #clock-cells property to serdes DT node since the serdes is also now
modeled as a clock provider and include the input clocks "pll0_refclk"
and "pll1_refclk" which are parents to the clocks modeled by serdes.

Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-3-kishon@ti.com
2021-06-08 09:32:31 -05:00
Kishon Vijay Abraham I
5c6d0b55b4 arm64: dts: ti: k3-j721e-main: Fix external refclk input to SERDES
Rename the external refclk inputs to the SERDES from
dummy_cmn_refclk/dummy_cmn_refclk1 to cmn_refclk/cmn_refclk1
respectively. Also move the external refclk DT nodes outside the
cbass_main DT node. Since in j721e common processor board, only the
cmn_refclk1 is connected to 100MHz clock, fix the clock frequency.

Fixes: afd094ebe6 ("arm64: dts: ti: k3-j721e-main: Add WIZ and SERDES PHY nodes")
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Reviewed-by: Aswath Govindraju <a-govindraju@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20210603143427.28735-2-kishon@ti.com
2021-06-08 09:32:31 -05:00
Tom Lendacky
8d651ee9c7 x86/ioremap: Map EFI-reserved memory as encrypted for SEV
Some drivers require memory that is marked as EFI boot services
data. In order for this memory to not be re-used by the kernel
after ExitBootServices(), efi_mem_reserve() is used to preserve it
by inserting a new EFI memory descriptor and marking it with the
EFI_MEMORY_RUNTIME attribute.

Under SEV, memory marked with the EFI_MEMORY_RUNTIME attribute needs to
be mapped encrypted by Linux, otherwise the kernel might crash at boot
like below:

  EFI Variables Facility v0.08 2004-May-17
  general protection fault, probably for non-canonical address 0x3597688770a868b2: 0000 [#1] SMP NOPTI
  CPU: 13 PID: 1 Comm: swapper/0 Not tainted 5.12.4-2-default #1 openSUSE Tumbleweed
  Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
  RIP: 0010:efi_mokvar_entry_next
  [...]
  Call Trace:
   efi_mokvar_sysfs_init
   ? efi_mokvar_table_init
   do_one_initcall
   ? __kmalloc
   kernel_init_freeable
   ? rest_init
   kernel_init
   ret_from_fork

Expand the __ioremap_check_other() function to additionally check for
this other type of boot data reserved at runtime and indicate that it
should be mapped encrypted for an SEV guest.

 [ bp: Massage commit message. ]

Fixes: 58c909022a ("efi: Support for MOK variable config table")
Reported-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Joerg Roedel <jroedel@suse.de>
Cc: <stable@vger.kernel.org> # 5.10+
Link: https://lkml.kernel.org/r/20210608095439.12668-2-joro@8bytes.org
2021-06-08 16:26:55 +02:00
Benjamin Gaignard
45040f6750 media: hantro: IMX8M: add variant for G2/HEVC codec
Add variant to IMX8M to enable G2/HEVC codec.
Define the capabilities for the hardware up to 3840x2160.
G2 doesn't have a postprocessor, uses the same clocks and has it
own interrupt.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 16:13:53 +02:00
Benjamin Gaignard
cb5dd5a0fa media: hantro: Introduce G2/HEVC decoder
Implement all the logic to get G2 hardware decoding HEVC frames.
It supports up level 5.1 HEVC stream.
It doesn't support yet 10 bits formats or the scaling feature.

Add HANTRO HEVC dedicated control to skip some bits at the beginning
of the slice header. That is very specific to this hardware so can't
go into uapi structures. Computing the needed value is complex and requires
information from the stream that only the userland knows so let it
provide the correct value to the driver.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Co-developed-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Co-developed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 16:13:23 +02:00
Cristian Marussi
f1748b1ee1 firmware: arm_scmi: Add delayed response status check
A successfully received delayed response could anyway report a failure at
the protocol layer in the message status field.

Add a check also for this error condition.

Link: https://lore.kernel.org/r/20210608103056.3388-1-cristian.marussi@arm.com
Fixes: 58ecdf03db ("firmware: arm_scmi: Add support for asynchronous commands and delayed response")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-08 15:10:14 +01:00
Benjamin Gaignard
b7782b34a7 media: hantro: handle V4L2_PIX_FMT_HEVC_SLICE control
Make sure that V4L2_PIX_FMT_HEVC_SLICE is correctly handled by the driver.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 16:09:14 +02:00
Benjamin Gaignard
35f51f6091 media: uapi: Add a control for HANTRO driver
The HEVC HANTRO driver needs to know the number of bits to skip at
the beginning of the slice header.
That is a hardware specific requirement so create a dedicated control
for this purpose.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 16:08:59 +02:00
Sudeep Holla
507cd4d2c5 firmware: arm_scmi: Add compatibility checks for shmem node
The shared memory node used for communication between the firmware and
the OS should be compatible with "arm,scmi-shmem". Add the check for the
same while parsing the node before fetching the memory regions.

Link: https://lore.kernel.org/r/20210602073851.1005607-2-sudeep.holla@arm.com
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Cristian Marussi <cristian.marussi@arm.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Jim Quinlan <jim2101024@gmail.com>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Tested-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Cristian Marussi <cristian.marussi@arm.com>
Tested-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-06-08 15:08:53 +01:00
Benjamin Gaignard
31ad15e688 media: hantro: Only use postproc when post processed formats are defined
If the variant doesn't support postprocessed formats make sure it will
be ok.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 16:08:18 +02:00
Benjamin Gaignard
8968cfc282 media: hantro: Define HEVC codec profiles and supported features
Define which HEVC profiles (up to level 5.1) and features
(no scaling, no 10 bits) are supported by the driver.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 16:07:25 +02:00
Benjamin Gaignard
42cb2a8f27 media: hantro: change hantro_codec_ops run prototype to return errors
Change hantro_codec_ops run prototype from 'void' to 'int'.
This allows the driver to cancel the job if an error occurs while configuring
the hardware.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 16:06:16 +02:00
Benjamin Gaignard
d395a78db9 media: hevc: Add decode params control
Add decode params control and the associated structure to group
all the information that are needed to decode a reference frame as
is described in ITU-T Rec. H.265 section "8.3.2 Decoding process
for reference picture set".

Adapt Cedrus driver to these changes.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 16:04:27 +02:00
Benjamin Gaignard
4dd0f63b51 media: hevc: Add fields and flags for hevc PPS
Add fields and flags as they are defined in
7.4.3.3.1 "General picture parameter set RBSP semantics of the
H.265 ITU specification.

Signed-off-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 16:01:15 +02:00
Zhen Lei
f1d9f31592 media: imon: use DEVICE_ATTR_RW() helper macro
Use DEVICE_ATTR_RW() helper macro instead of DEVICE_ATTR(), which is
simpler and more readable.

Due to the names of the read and write functions of the sysfs attribute is
normalized, there is a natural association.

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 15:57:51 +02:00
Alexander Voronov
53a370f621 media: rc: add keymap for Toshiba CT-90405 remote
This is an NEC remote control device shipped with some Toshiba TVs.

Signed-off-by: Alexander Voronov <avv.0@ya.ru>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-06-08 15:56:58 +02:00