When calling the subdev, certain subdev drivers will overwrite the
frame size and adding sizes which are beyond the ISC's capabilities.
Thus we need to ensure the frame size is cropped to the maximum caps.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The driver name constant must defined based on product driver, thus moving
the constant directly where it's required. This will allow each ISC based
product to define it's own name.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Separate the gamma table from the isc base file into the specific sama5d2
product file.
Add a pointer to the gamma table and entries count inside the platform
driver specific struct.
[hverkuil: made isc_sama5d2_gamma_table static]
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
sps_max_sub_layers_minus1 is needed if the driver wishes to determine
whether or not a frame might be used for reference.
Signed-off-by: John Cox <jc@kynesim.co.uk>
Reviewed-by: Benjamin Gaignard <benjamin.gaignard@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Use the new vb2_queue_change_type() function in .vidioc_reqbufs and
.vidioc_create_bufs instead of changing the queue type manually in
vidioc_s_fmt_vbi_cap() and vidioc_s_fmt_sliced_vbi_cap().
This allows for a more consistent behavior, as .vidioc_reqbufs and
.vidioc_create_bufs are when the queue will become "busy".
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Vivid tracks the VBI capture mode in vivid_dev->stream_sliced_vbi_cap
field. We can just look at the buffer type instead, and drop the field.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
On some platforms a video device can capture either video data or
metadata. The driver can implement vidioc functions for both video and
metadata, and use a single vb2_queue for the buffers. However, vb2_queue
requires choosing a single buffer type, which conflicts with the idea of
capturing either video or metadata.
The buffer type of vb2_queue can be changed, but it's not obvious how
this should be done in the drivers. To help this, add a new helper
function vb2_queue_change_type() which ensures the correct checks and
documents how it can be used.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The hookup with qcom_smmu_impl is required to do ACPI boot on SC8180X
based devices like Lenovo Flex 5G laptop and Microsoft Surface Pro X.
Define acpi_platform_list for these platforms and match them using
acpi_match_platform_list() call, and create qcom_smmu_impl accordingly.
(np == NULL) is used to check ACPI boot, because fwnode of SMMU device
is a static allocation and thus helpers like has_acpi_companion() don't
work here.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20210509022607.17534-1-shawn.guo@linaro.org
Signed-off-by: Will Deacon <will@kernel.org>
We discussed if that is really the right approach for quite a while now, but
digging deeper into a bug report on arm turned out that this is actually
horrible broken right now.
The reason for this is that vmf_insert_mixed_prot() always tries to grab
a reference to the underlaying page on architectures without
ARCH_HAS_PTE_SPECIAL and as far as I can see also enabled GUP.
So nuke using VM_MIXEDMAP here and use VM_PFNMAP instead.
Also make sure to reject mappings without VM_SHARED.
v2: reject COW mappings, merge function with only caller
v3: adjust comment as suggested by Thomas
Signed-off-by: Christian König <christian.koenig@amd.com>
Bugs: https://gitlab.freedesktop.org/drm/amd/-/issues/1606#note_936174
Link: https://patchwork.freedesktop.org/patch/msgid/20210607135830.8574-1-christian.koenig@amd.com
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Add driver for TI SN65DSI83 Single-link DSI to Single-link LVDS bridge
and TI SN65DSI84 Single-link DSI to Dual-link or 2x Single-link LVDS
bridge. TI SN65DSI85 is unsupported due to lack of hardware to test on,
but easy to add.
The driver operates the chip via I2C bus. Currently the LVDS clock are
always derived from DSI clock lane, which is the usual mode of operation.
Support for clock from external oscillator is not implemented, but it is
easy to add if ever needed. Only RGB888 pixel format is implemented, the
LVDS666 is not supported, but could be added if needed.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Frieder Schrempf <frieder.schrempf@kontron.de>
Tested-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Loic Poulain <loic.poulain@linaro.org>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: Valentin Raevsky <valentin@compulab.co.il>
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-2-marex@denx.de
Add DT binding document for TI SN65DSI83 and SN65DSI84 DSI to LVDS bridge.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Stephen Boyd <swboyd@chromium.org>
Cc: devicetree@vger.kernel.org
To: dri-devel@lists.freedesktop.org
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210607174258.16300-1-marex@denx.de
Syzbot reports that when you have AP_VLAN interfaces that are up
and close the AP interface they belong to, we get a deadlock. No
surprise - since we dev_close() them with the wiphy mutex held,
which goes back into the netdev notifier in cfg80211 and tries to
acquire the wiphy mutex there.
To fix this, we need to do two things:
1) prevent changing iftype while AP_VLANs are up, we can't
easily fix this case since cfg80211 already calls us with
the wiphy mutex held, but change_interface() is relatively
rare in drivers anyway, so changing iftype isn't used much
(and userspace has to fall back to down/change/up anyway)
2) pull the dev_close() loop over VLANs out of the wiphy mutex
section in the normal stop case
Cc: stable@vger.kernel.org
Reported-by: syzbot+452ea4fbbef700ff0a56@syzkaller.appspotmail.com
Fixes: a05829a722 ("cfg80211: avoid holding the RTNL when calling the driver")
Link: https://lore.kernel.org/r/20210517160322.9b8f356c0222.I392cb0e2fa5a1a94cf2e637555d702c7e512c1ff@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There is a lot of Raspberry Pi specific stuff (neither SoC or board
specific) for the BCM2711 which is currently in the RPi 4 B dts. In order
to avoid copy & paste for every new BCM2711 based Raspberry Pi, move it
into a separate dtsi.
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Link: https://lore.kernel.org/r/1622981777-5023-4-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
The BCM2711 has a slightly different VEC than the one found in the older
SoCs. Now that we support the new variant, add its compatible to the
device tree.
Signed-off-by: Mateusz Kwiatkowski <kfyatek+publicgit@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20210520150344.273900-5-maxime@cerno.tech
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
This reverts commit 278407a53c.
The original change breaks USB config on Raspberry Pi Zero and Pi 4 B,
because it exceeds the total fifo size of 4080. A naive attempt to reduce
g-tx-fifo-size doesn't help on Raspberry Pi Zero. So better go back.
Fixes: 278407a53c ("ARM: dts: bcm283x: increase dwc2's RX FIFO size")
Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
Cc: Pavel Hofman <pavel.hofman@ivitera.com>
Link: https://lore.kernel.org/r/1622293371-5997-1-git-send-email-stefan.wahren@i2se.com
Signed-off-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Since devman_upiu_cmd() is not COMMAND UPIU, and doesn't have CDB, it is
better to use UPIU query trace, which provides more helpful information for
issue troubleshooting.
Link: https://lore.kernel.org/r/20210531104308.391842-5-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
For the query request, we already have query_trace, but in
ufshcd_send_command(), there will add two more redundant traces. Since
lrbp->cmd is NULL in the query request, the two trace events below provide
nothing except the tag and DB. Instead of letting them take up the limited
trace ring buffer, it’s better not to print these traces in case of cmd ==
NULL.
ufshcd_command: send_req: ff3b0000.ufs: tag: 28, DB: 0x0, size: -1, IS: 0, LBA: 18446744073709551615, opcode: 0x0 (0x0), group_id: 0x0
ufshcd_command: dev_complete: ff3b0000.ufs: tag: 28, DB: 0x0, size: -1, IS: 0, LBA: 18446744073709551615, opcode: 0x0 (0x0), group_id: 0x0
Link: https://lore.kernel.org/r/20210531104308.391842-4-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The current UPIU completion event trace still prints the COMMAND UPIU
header, rather than the RSP UPIU header. This makes UPIU command trace
useless in problem shooting in case we receive a trace log from the
customer/field.
There are two important fields in RSP UPIU:
1. The response field, which indicates the UFS defined overall success or
failure of the series of Command, Data and RESPONSE UPIU’s that make up
the execution of a task.
2. The Status field, which contains the command set specific status for a
specific command issued by the initiator device.
Before this commit, the UPIU paired trace events:
ufshcd_upiu: send_req: fe3b0000.ufs: HDR:01 20 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
ufshcd_upiu: complete_rsp: fe3b0000.ufs: HDR:01 20 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
After this commit:
ufshcd_upiu: send_req: fe3b0000.ufs: HDR:01 20 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
ufshcd_upiu: complete_rsp: fe3b0000.ufs: HDR:21 00 00 1c 00 00 00 00 00 00 00 00, CDB:3b e1 00 00 00 00 00 00 30 00 00 00 00 00 00 00
Link: https://lore.kernel.org/r/20210531104308.391842-3-huobean@gmail.com
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
To consistent with trace event print, convert the value of the variable
'lba' from a block layer sector address to a logical block adress.
Link: https://lore.kernel.org/r/20210531104308.391842-2-huobean@gmail.com
Suggested-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by explicitly adding a break statement instead of just
letting the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210604023530.GA180997@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a
fall-through warning by replacing a /* fallthrough */ comment with the new
pseudo-keyword macro fallthrough;
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210604022752.GA168289@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
By reading the UTP Transfer Request List Completion Notification Register,
which is added in UFSHCI Ver 3.0, SW can easily get the compeleted transfer
requests. Thus, SW can get rid of host lock, which is used to synchronize
the tr_doorbell and outstanding_reqs, on transfer requests dispatch and
completion paths. This can further benefit random read/write performance.
Link: https://lore.kernel.org/r/1621845419-14194-4-git-send-email-cang@codeaurora.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Current UFS IRQ handler is completely wrapped by host lock, and because
ufshcd_send_command() is also protected by host lock, when IRQ handler
fires, not only the CPU running the IRQ handler cannot send new requests,
the rest CPUs can neither. Move the host lock wrapping the IRQ handler into
specific branches, i.e., ufshcd_uic_cmd_compl(), ufshcd_check_errors(),
ufshcd_tmc_handler() and ufshcd_transfer_req_compl(). Meanwhile, to further
reduce occpuation of host lock in ufshcd_transfer_req_compl(), host lock is
no longer required to call __ufshcd_transfer_req_compl(). As per test, the
optimization can bring considerable gain to random read/write performance.
Link: https://lore.kernel.org/r/1621845419-14194-3-git-send-email-cang@codeaurora.org
Cc: Stanley Chu <stanley.chu@mediatek.com>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Co-developed-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Asutosh Das <asutoshd@codeaurora.org>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
ufshcd_host_reset_and_restore() anyways completes all pending requests
before starts re-probing, so there is no need to complete the command on
the highest bit in tr_doorbell in advance.
Link: https://lore.kernel.org/r/1621845419-14194-2-git-send-email-cang@codeaurora.org
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Reviewed-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Can Guo <cang@codeaurora.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
get_device(shost->shost_gendev.parent) is called after host state has
switched to SHOST_RUNNING. scsi_host_dev_release() shouldn't release the
parent device if host state is still SHOST_CREATED.
Link: https://lore.kernel.org/r/20210602133029.2864069-5-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
scsi_host_dev_release() only frees dev_name when host state is
SHOST_CREATED. After host state has changed to SHOST_RUNNING,
scsi_host_dev_release() no longer cleans up.
Fix this by doing a put_device(&shost->shost_dev) in the failure path when
host state is SHOST_RUNNING. Move get_device(&shost->shost_gendev) before
device_add(&shost->shost_dev) so that scsi_host_cls_release() can do a put
on this reference.
Link: https://lore.kernel.org/r/20210602133029.2864069-4-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: Hannes Reinecke <hare@suse.de>
Reported-by: John Garry <john.garry@huawei.com>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
When scsi_add_host_with_dma() returns failure, the caller will call
scsi_host_put(shost) to release everything allocated for this host
instance. Consequently we can't also free allocated stuff in
scsi_add_host_with_dma(), otherwise we will end up with a double free.
Strictly speaking, host resource allocations should have been done in
scsi_host_alloc(). However, the allocations may need information which is
not yet provided by the driver when that function is called. So leave the
allocations where they are but rely on host device's release handler to
free resources.
Link: https://lore.kernel.org/r/20210602133029.2864069-3-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
After device is initialized via device_initialize(), or its name is set via
dev_set_name(), the device has to be freed via put_device(). Otherwise
device name will be leaked because it is allocated dynamically in
dev_set_name().
Fix the leak by replacing kfree() with put_device(). Since
scsi_host_dev_release() properly handles IDA and kthread removal, remove
special-casing these from the error handling as well.
Link: https://lore.kernel.org/r/20210602133029.2864069-2-ming.lei@redhat.com
Cc: Bart Van Assche <bvanassche@acm.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Hannes Reinecke <hare@suse.de>
Tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: John Garry <john.garry@huawei.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The "retval" variable needs to be signed for the error handling to work.
Link: https://lore.kernel.org/r/YLjMEAFNxOas1mIp@mwanda
Fixes: 7e26e3ea02 ("scsi: scsi_dh_alua: Check for negative result value")
Reviewed-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Remove all references to the description of __ufshcd_wl_{suspend,resume} as
no such description exist.
Fixes: b294ff3e34 (scsi: ufs: core: Enable power management for wlun)
Link: https://lore.kernel.org/r/20210603122209.635799-1-avri.altman@wdc.com
Signed-off-by: Avri Altman <avri.altman@wdc.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy() avoid using an inline const buffer
argument and instead just statically initialize the destination array
directly.
Link: https://lore.kernel.org/r/20210602180000.3326448-1-keescook@chromium.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
host->max_id defines the maximum target id that the SCSI midlayer will
attempt to manually scan. The default is 8. Update the value to the max
sessions the driver supports.
[mkp: applied by hand]
Link: https://lore.kernel.org/r/20210602104653.17278-1-jhasan@marvell.com
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
This test will require /dev/rtc0, the default RTC device, or one
specified by user to run. Since this default RTC is not guaranteed to
exist on all of the devices, so check its existence first, otherwise
skip this test with the kselftest skip code 4.
Without this patch this test will fail like this on a s390x zVM:
$ selftests: timers: rtcpie
$ /dev/rtc0: No such file or directory
not ok 1 selftests: timers: rtcpie # exit=22
With this patch:
$ selftests: timers: rtcpie
$ Default RTC /dev/rtc0 does not exist. Test Skipped!
not ok 9 selftests: timers: rtcpie # SKIP
Fixed up change log so "With this patch" text doesn't get dropped.
Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Po-Hsu Lin <po-hsu.lin@canonical.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Installed seccomp tests would time out because the "settings" file was
missing. Install both "settings" (needed for proper test execution) and
"config" (needed for informational purposes) with the other test
targets.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
When calling xsk_socket__create_shared(), the logic at line 1097 marks a
boolean flag true within the xsk_umem structure to track setup progress
in order to support multiple calls to the function. However, instead of
marking umem->tx_ring_setup_done, the code incorrectly sets
umem->rx_ring_setup_done. This leads to improper behaviour when
creating and destroying xsk and umem structures.
Multiple calls to this function is documented as supported.
Fixes: ca7a83e248 ("libbpf: Only create rx and tx XDP rings when necessary")
Signed-off-by: Kev Jackson <foamdino@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/YL4aU4f3Aaik7CN0@linux-dev
Some pseudo-filesystems do not have an explicit splice fops since adding
commit 36e2c7421f ("fs: don't allow splice read/write without explicit ops"),
and now will reject attempts to use splice() in those filesystem paths.
Reported-by: kernel test robot <rong.a.chen@intel.com>
Link: https://lore.kernel.org/lkml/202009181443.C2179FB@keescook/
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Cc: Christoph Hellwig <hch@lst.de>
Cc: Shuah Khan <shuah@kernel.org>
Cc: linux-kselftest@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
This silences a static checker warning due to the unusual macro
construction of EXPECT_*() by adding explicit {}s around the enclosing
while loop.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 7f657d5bf5 ("selftests: tls: add selftests for TLS sockets")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Resctrl test suite accepts command line argument "-t" to specify the
unit tests to run in the test list (e.g., -t mbm,mba,cmt,cat) as
documented in the help.
When calling strtok() to parse the option, the incorrect delimiters
argument ":\t" is used. As a result, passing "-t mbm,mba,cmt,cat" throws
an invalid option error.
Fix this by using delimiters argument "," instead of ":\t" for parsing
of unit tests list. At the same time, remove the unnecessary "spaces"
between the unit tests in help documentation to prevent confusion.
Fixes: 790bf585b0 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Fixes: 78941183d1 ("selftests/resctrl: Add Cache QoS Monitoring (CQM) selftest")
Fixes: ecdbb911f2 ("selftests/resctrl: Add MBM test")
Fixes: 034c7678dd ("selftests/resctrl: Add README for resctrl tests")
Cc: stable@vger.kernel.org
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
There is a typo in the returned error code sign from irdma_modify_qp()
when the attr_mask is not supported - Fix it.
Fixes: b48c24c2d7 ("RDMA/irdma: Implement device supported verb APIs")
Link: https://lore.kernel.org/r/20210607221543.254144-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The variable val is being initialized with a value that is never
read, it is being updated later on. The assignment is redundant and
can be removed.
Link: https://lore.kernel.org/r/20210605131347.26293-1-colin.king@canonical.com
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
A single statement is indented one level too deeply, clean up the
code by removing the extraneous tab.
Link: https://lore.kernel.org/r/20210605130400.25987-1-colin.king@canonical.com
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
The shifting of the u8 integer info->map[i] the left will be promoted
to a 32 bit signed int and then sign-extended to a u64. In the event
that the top bit of the u8 is set then all then all the upper 32 bits
of the u64 end up as also being set because of the sign-extension.
Fix this by casting the u8 values to a u64 before the left shift. This
Link: https://lore.kernel.org/r/20210605122059.25105-1-colin.king@canonical.com
Addresses-Coverity: ("Unitentional integer overflow / bad shift operation")
Fixes: 3f49d68425 ("RDMA/irdma: Implement HW Admin Queue OPs")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
IFF_POINTOPOINT interfaces use NUD_NOARP entries for IPv6. It's possible to
fill up the neighbour table with enough entries that it will overflow for
valid connections after that.
This behaviour is more prevalent after commit 58956317c8 ("neighbor:
Improve garbage collection") is applied, as it prevents removal from
entries that are not NUD_FAILED, unless they are more than 5s old.
Fixes: 58956317c8 (neighbor: Improve garbage collection)
Reported-by: Kasper Dupont <kasperd@gjkwv.06.feb.2021.kasperd.net>
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
On Macbook 2013, resuming from suspend-to-idle or standby resulted in the
external monitor no longer being detected, a stacktrace, and errors like
this in dmesg:
pcieport 0000:06:00.0: can't change power state from D3hot to D0 (config space inaccessible)
The reason is that we know how to turn power to the Thunderbolt controller
*off* via the SXIO/SXFP/SXLF methods, but we don't know how to turn power
back on. We have to rely on firmware to turn the power back on.
When going to the "suspend-to-idle" or "standby" system sleep states,
firmware is not involved either on the suspend side or the resume side, so
we can't use SXIO/SXFP/SXLF to turn the power off.
Skip SXIO/SXFP/SXLF when firmware isn't involved in suspend, e.g., when
we're going to the "suspend-to-idle" or "standby" system sleep states.
Fixes: 1df5172c5c ("PCI: Suspend/resume quirks for Apple thunderbolt")
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=212767
Link: https://lore.kernel.org/r/20210520235501.917397-1-Hi-Angel@yandex.ru
Signed-off-by: Konstantin Kharlamov <Hi-Angel@yandex.ru>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Lukas Wunner <lukas@wunner.de>
Cc: stable@vger.kernel.org
Matteo Croce says:
====================
page_pool: recycle buffers
This is a respin of [1]
This patchset shows the plans for allowing page_pool to handle and
maintain DMA map/unmap of the pages it serves to the driver. For this
to work a return hook in the network core is introduced.
The overall purpose is to simplify drivers, by providing a page
allocation API that does recycling, such that each driver doesn't have
to reinvent its own recycling scheme. Using page_pool in a driver
does not require implementing XDP support, but it makes it trivially
easy to do so. Instead of allocating buffers specifically for SKBs
we now allocate a generic buffer and either wrap it on an SKB
(via build_skb) or create an XDP frame.
The recycling code leverages the XDP recycle APIs.
The Marvell mvpp2 and mvneta drivers are used in this patchset to
demonstrate how to use the API, and tested on a MacchiatoBIN
and EspressoBIN boards respectively.
Please let this going in on a future -rc1 so to allow enough time
to have wider tests.
v7 -> v8:
- use page->lru.next instead of page->index for pfmemalloc
- remove conditional include
- rework page_pool_return_skb_page() so to have less conversions
between page and addresses, and call compound_head() only once
- move some code from skb_free_head() to a new helper skb_pp_recycle()
- misc fixes
v6 -> v7:
- refresh patches against net-next
- remove a redundant call to virt_to_head_page()
- update mvneta benchmarks
v5 -> v6:
- preserve pfmemalloc bit when setting signature
- fix typo in mvneta
- rebase on next-next with the new cache
- don't clear the skb->pp_recycle in pskb_expand_head()
v4 -> v5:
- move the signature so it doesn't alias with page->mapping
- use an invalid pointer as magic
- incorporate Matthew Wilcox's changes for pfmemalloc pages
- move the __skb_frag_unref() changes to a preliminary patch
- refactor some cpp directives
- only attempt recycling if skb->head_frag
- clear skb->pp_recycle in pskb_expand_head()
v3 -> v4:
- store a pointer to page_pool instead of xdp_mem_info
- drop a patch which reduces xdp_mem_info size
- do the recycling in the page_pool code instead of xdp_return
- remove some unused headers include
- remove some useless forward declaration
v2 -> v3:
- added missing SOBs
- CCed the MM people
v1 -> v2:
- fix a commit message
- avoid setting pp_recycle multiple times on mvneta
- squash two patches to avoid breaking bisect
====================
Signed-off-by: David S. Miller <davem@davemloft.net>