This operation requests that the IOC update the TimeStamp.
When the I/O Unit is powered on it sets the TimeStamp field value to
0x0000_0000_0000_0000 and increments the current value every millisecond.
A host driver sets the TimeStamp field to the current time by using an
IOCInit request. The TimeStamp field is periodically updated by the host
driver.
Link: https://lore.kernel.org/r/20210520152545.2710479-11-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Detection of firmware fault or any kind of unresponsiveness in the
controller (any admin command which times out) results in resetting the
controller. The primary reset mechanisms used are either soft reset or diag
fault reset. A reset is performed if the host sets the ResetAction field in
the HostDiagnostic register to either 001b (soft reset) or 007b (diag fault
reset). After successfully resetting the controller the driver
reinitializes the controller by going through start of the day
initialization procedure. Pending I/Os during the reset are returned back
to the SCSI midlayer for retry.
Link: https://lore.kernel.org/r/20210520152545.2710479-10-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.co
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement support for handling the following MPI events:
- MPI3_EVENT_SAS_BROADCAST_PRIMITIVE
- MPI3_EVENT_CABLE_MGMT
- MPI3_EVENT_ENERGY_PACK_CHANGE
Link: https://lore.kernel.org/r/20210520152545.2710479-9-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement support for the following PCIe-related MPI events:
- MPI3_EVENT_PCIE_TOPOLOGY_CHANGE_LIST
- MPI3_EVENT_PCIE_ENUMERATION
Link: https://lore.kernel.org/r/20210520152545.2710479-8-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Firmware can report various MPI Events. Enable support for processing the
following events related to device addition/removal to the driver:
- MPI3_EVENT_DEVICE_ADDED
- MPI3_EVENT_DEVICE_INFO_CHANGED
- MPI3_EVENT_DEVICE_STATUS_CHANGE
- MPI3_EVENT_ENCL_DEVICE_STATUS_CHANGE
- MPI3_EVENT_SAS_TOPOLOGY_CHANGE_LIST
- MPI3_EVENT_SAS_DISCOVERY
- MPI3_EVENT_SAS_DEVICE_DISCOVERY_ERROR
Link: https://lore.kernel.org/r/20210520152545.2710479-7-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The watchdog thread is the driver's internal thread which does a few things
such as detecting firmware faults, resetting the controller, performing
timestamp sync, etc.
Link: https://lore.kernel.org/r/20210520152545.2710479-6-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Send Port Enable Request to FW for Device Discovery. As part of port
enable completion driver calls scan_start and scan_finished hooks. SCSI
layer references like sdev, starget, etc. are added but actual device
discovery will be supported once driver adds complete event process
handling.
Link: https://lore.kernel.org/r/20210520152545.2710479-5-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: hare@suse.de
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Create operational request and reply queue pair.
The MPI3 transport interface consists of an Administrative Request Queue,
an Administrative Reply Queue, and Operational Messaging Queues. The
Operational Messaging Queues are the primary communication mechanism
between the host and the I/O Controller (IOC). Request messages, allocated
in host memory, identify I/O operations to be performed by the IOC. These
operations are queued on an Operational Request Queue by the host driver.
Reply descriptors track I/O operations as they complete. The IOC queues
these completions in an Operational Reply Queue.
To fulfil large contiguous memory requirement, driver creates multiple
segments and provide the list of segments. Each segment size should be 4K
which is a hardware requirement. An element array is contiguous or
segmented. A contiguous element array is located in contiguous physical
memory. A contiguous element array must be aligned on an element size
boundary. An element's physical address within the array may be directly
calculated from the base address, the Producer/Consumer index, and the
element size.
Expected phased identifier bit is used to find out valid entry on reply
queue. Driver sets <ephase> bit and IOC inverts the value of this bit on
each pass.
Link: https://lore.kernel.org/r/20210520152545.2710479-4-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Implement basic pci device driver requirements: Device probing, memory
allocation, mapping system registers, allocate irq lines, etc.
Source is managed in mainly three different files:
- mpi3mr_fw.c: Common code which interacts with underlying fw/hw.
- mpi3mr_os.c: Common code which interacts with SCSI midlayer.
- mpi3mr_app.c: Common code which interacts with application/ioctl.
This is currently work in progress.
Link: https://lore.kernel.org/r/20210520152545.2710479-3-kashyap.desai@broadcom.com
Cc: sathya.prakash@broadcom.com
Cc: bvanassche@acm.org
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Tomas Henzl <thenzl@redhat.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Kashyap Desai <kashyap.desai@broadcom.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Fix the following W=1 kernel build warning:
drivers/scsi/ufs/ufshcd.c:9773: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
[mkp: upcase abbreviations]
Link: https://lore.kernel.org/r/20210531163122.451375-1-huobean@gmail.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Bean Huo <beanhuo@micron.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), avoid intentionally writing across
neighboring array fields.
Switch from rsp_ui to resp_buf, since resp_ui isn't SSP_RESP_IU_MAX_SIZE
bytes in length. This avoids future compile-time warnings.
Link: https://lore.kernel.org/r/20210528181337.792268-4-keescook@chromium.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation for FORTIFY_SOURCE performing compile-time and run-time
field bounds checking for memcpy(), avoid intentionally writing across
neighboring array fields.
Remove old-style 1-byte array in favor of a flexible array[1] to avoid
future false-positive cross-field memcpy() warning in:
esas2r_vda.c:
memcpy(vi->cmd.gsv.version_info, esas2r_vdaioctl_versions, ...)
The change in struct size doesn't change other structure sizes (it is
already maxed out to 256 bytes, for example here:
union {
struct atto_ioctl_vda_scsi_cmd scsi;
struct atto_ioctl_vda_flash_cmd flash;
struct atto_ioctl_vda_diag_cmd diag;
struct atto_ioctl_vda_cli_cmd cli;
struct atto_ioctl_vda_smp_cmd smp;
struct atto_ioctl_vda_cfg_cmd cfg;
struct atto_ioctl_vda_mgt_cmd mgt;
struct atto_ioctl_vda_gsv_cmd gsv;
u8 cmd_info[256];
} cmd;
No sizes are calculated using the enclosing structure, so no other
updates are needed.
Link: https://lore.kernel.org/r/20210528181337.792268-3-keescook@chromium.org
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
The BusLogic driver has build errors on ia64 due to a name collision (in
the #included FlashPoint.c file). Rename the struct field in struct
sccb_mgr_info from si_flags to si_mflags (manager flags) to mend the build.
This is the first problem. There are 50+ others after this one:
In file included from ../include/uapi/linux/signal.h:6,
from ../include/linux/signal_types.h:10,
from ../include/linux/sched.h:29,
from ../include/linux/hardirq.h:9,
from ../include/linux/interrupt.h:11,
from ../drivers/scsi/BusLogic.c:27:
../arch/ia64/include/uapi/asm/siginfo.h:15:27: error: expected ':', ',', ';', '}' or '__attribute__' before '.' token
15 | #define si_flags _sifields._sigfault._flags
| ^
../drivers/scsi/FlashPoint.c:43:6: note: in expansion of macro 'si_flags'
43 | u16 si_flags;
| ^~~~~~~~
In file included from ../drivers/scsi/BusLogic.c:51:
../drivers/scsi/FlashPoint.c: In function 'FlashPoint_ProbeHostAdapter':
../drivers/scsi/FlashPoint.c:1076:11: error: 'struct sccb_mgr_info' has no member named '_sifields'
1076 | pCardInfo->si_flags = 0x0000;
| ^~
../drivers/scsi/FlashPoint.c:1079:12: error: 'struct sccb_mgr_info' has no member named '_sifields'
Link: https://lore.kernel.org/r/20210529234857.6870-1-rdunlap@infradead.org
Fixes: 391e2f2560 ("[SCSI] BusLogic: Port driver to 64-bit.")
Cc: "James E.J. Bottomley" <jejb@linux.ibm.com>
Cc: "Martin K. Petersen" <martin.petersen@oracle.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Hannes Reinecke <hare@suse.de>
Cc: Khalid Aziz <khalid.aziz@oracle.com>
Cc: Khalid Aziz <khalid@gonehiking.org>
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
In preparation to enable -Wimplicit-fallthrough for Clang, fix a couple
of warnings by explicitly adding break statements instead of just letting
the code fall through to the next case.
Link: https://github.com/KSPP/linux/issues/115
Link: https://lore.kernel.org/r/20210528200828.GA39349@embeddedor
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Pass in fcport->vha to ql_log() in order to add the PCI address to the log.
Currently NULL is passed in which gives this confusing log entry:
> qla2xxx [0000:00:00.0]-2112: : qla_nvme_unregister_remote_port: unregister remoteport on 0000000009d6a2e9 50000973981648c7
Link: https://lore.kernel.org/r/20210531122444.116655-1-dwagner@suse.de
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
MediaTek ufshci needs to be disabled before HW reset to avoid potential
issues.
Link: https://lore.kernel.org/r/20210528033624.12170-3-alice.chao@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Alice.Chao <alice.chao@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Export ufshcd_hba_stop() to allow vendors to disable HCI in variant ops.
Link: https://lore.kernel.org/r/20210528033624.12170-2-alice.chao@mediatek.com
Reviewed-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Alice.Chao <alice.chao@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
On Qualcomm Technologies, Inc. PMIC PMK8350, the PON peripheral
is split into two peripherals: PON_HLOS and PON_PBS. The
application processor only has write access to PON_HLOS which
limits it to only receiving PON interrupts.
Add support for the PMK8350 PON_HLOS peripheral so that its
KPDPWR_N and RESIN_N interrupts can be used to detect key
presses.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/1620630064-16354-2-git-send-email-skakit@codeaurora.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add power key and resin compatible strings for the PMK8350 PMIC.
These are needed to distinguish key PON_HLOS register differences
between PMK8350 and previous PMIC PON modules.
Signed-off-by: David Collins <collinsd@codeaurora.org>
Signed-off-by: satya priya <skakit@codeaurora.org>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1620630064-16354-3-git-send-email-skakit@codeaurora.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
At the moment, the edt-ft5x06 driver can control a single regulator
("vcc"). However, some FocalTech touch controllers have an additional
IOVCC pin that should be supplied with the digital I/O voltage.
The I/O voltage might be provided by another regulator that should also
be kept on. Otherwise, the touchscreen can randomly stop functioning if
the regulator is turned off because no other components still require it.
Implement (optional) support for also enabling an "iovcc-supply".
The datasheet specifies a delay of ~ 10us before enabling VDD/VCC
after IOVCC is enabled, so make sure to enable IOVCC first.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210510193108.50178-2-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
At the moment, the edt-ft5x06 driver can control a single regulator
("vcc"). However, some FocalTech touch controllers have an additional
IOVCC pin that should be supplied with the digital I/O voltage.
The I/O voltage might be provided by another regulator that should also
be kept on. Otherwise, the touchscreen can randomly stop functioning if
the regulator is turned off because no other components still require it.
Document (optional) support for controlling the regulator for IOVCC
using "iovcc-supply".
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210510193108.50178-1-stephan@gerhold.net
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This single commit is shared between fixes and for-next, as it fixes a
concrete bug while likely conflicting with a more invasive cleanup to
avoid these oddball mappings entirely.
* riscv/riscv-wx-mappings:
riscv: mm: Fix W+X mappings at boot
`memblock_free()` takes a physical address as its first argument.
Fix the wrong usages in `init_resources()`.
Fixes: ffe0e52612 ("RISC-V: Improve init_resources()")
Fixes: 797f0375dd ("RISC-V: Do not allocate memblock while iterating reserved memblocks")
Signed-off-by: Wende Tan <twd2.me@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The errata_cip_453.o should be built only when the Kconfig
CONFIG_ERRATA_SIFIVE_CIP_453 is enabled.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Vincent <vincent.chen@sifive.com>
Fixes: 0e0d499251 ("riscv: enable SiFive errata CIP-453 and CIP-1200 Kconfig only if CONFIG_64BIT=y")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
UAPI Changes:
- Add reworked uAPI for DG1 behind CONFIG_BROKEN (Matt A, Abdiel)
Driver Changes:
- Fix for Gitlab issues #3293 and #3450:
Avoid kernel crash on older L-shape memory machines
- Add Wa_14010733141 (VDBox SFC reset) for Gen11+ (Aditya)
- Fix crash in auto_retire active retire callback due to
misalignment (Stephane)
- Fix overlay active retire callback alignment (Tvrtko)
- Eliminate need to align active retire callbacks (Matt A, Ville,
Daniel)
- Program FF_MODE2 tuning value for all Gen12 platforms (Caz)
- Add Wa_14011060649 for TGL,RKL,DG1 and ADLS (Swathi)
- Create stolen memory region from local memory on DG1 (CQ)
- Place PD in LMEM on dGFX (Matt A)
- Use WC when default state object is allocated in LMEM (Venkata)
- Determine the coherent map type based on object location (Venkata)
- Use lmem physical addresses for fb_mmap() on discrete (Mohammed)
- Bypass aperture on fbdev when LMEM is available (Anusha)
- Return error value when displayable BO not in LMEM for dGFX (Mohammed)
- Do release kernel context if breadcrumb measure fails (Janusz)
- Hide modparams for compiled-out features (Tvrtko)
- Apply Wa_22010271021 for all Gen11 platforms (Caz)
- Fix unlikely ref count race in arming the watchdog timer (Tvrtko)
- Check actual RC6 enable status in PMU (Tvrtko)
- Fix a double free in gen8_preallocate_top_level_pdp (Lv)
- Use trylock in shrinker for GGTT on BSW VT-d and BXT (Maarten)
- Remove erroneous i915_is_ggtt check for
I915_GEM_OBJECT_UNBIND_VM_TRYLOCK (Maarten)
- Convert uAPI headers to real kerneldoc (Matt A)
- Clean up kerneldoc warnings headers (Matt A, Maarten)
- Fail driver if LMEM training failed (Matt R)
- Avoid div-by-zero on Gen2 (Ville)
- Read C0DRB3/C1DRB3 as 16 bits again and add _BW suffix (Ville)
- Remove reference to struct drm_device.pdev (Thomas)
- Increase separation between GuC and execlists code (Chris, Matt B)
- Use might_alloc() (Bernard)
- Split DGFX_FEATURES from GEN12_FEATURES (Lucas)
- Deduplicate Wa_22010271021 programming on (Jose)
- Drop duplicate WaDisable4x2SubspanOptimization:hsw (Tvrtko)
- Selftest improvements (Chris, Hsin-Yi, Tvrtko)
- Shuffle around init_memory_region for stolen (Matt)
- Typo fixes (wengjianfeng)
[airlied: fix conflict with fixes in i915_active.c]
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/YLCbBR22BsQ/dpJB@jlahtine-mobl.ger.corp.intel.com
There is nothing in include/linux/input/cyttsp.h that might be of interes
to the kernel at large, so let's move this information into the driver
code and remove the header.
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20210531052307.1433979-2-dmitry.torokhov@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull HID fixes from Jiri Kosina:
- memory leak fix in usbhid from Anirudh Rayabharam
- additions for a few new recognized generic key IDs from Dmitry
Torokhov
- Asus T101HA and Dell K15A quirks from Hans de Goede
- memory leak fix in amd_sfh from Basavaraj Natikar
- Win8 compatibility and Stylus fixes in multitouch driver from
Ahelenia Ziemiańska
- NULL pointer dereference fix in hid-magicmouse from Johan Hovold
- assorted other small fixes and device ID additions
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (33 commits)
HID: asus: Cleanup Asus T101HA keyboard-dock handling
HID: magicmouse: fix NULL-deref on disconnect
HID: intel-ish-hid: ipc: Add Alder Lake device IDs
HID: i2c-hid: fix format string mismatch
HID: amd_sfh: Fix memory leak in amd_sfh_work
HID: amd_sfh: Use devm_kzalloc() instead of kzalloc()
HID: ft260: improve error handling of ft260_hid_feature_report_get()
HID: magicmouse: fix crash when disconnecting Magic Trackpad 2
HID: gt683r: add missing MODULE_DEVICE_TABLE
HID: pidff: fix error return code in hid_pidff_init()
HID: logitech-hidpp: initialize level variable
HID: multitouch: Disable event reporting on suspend on the Asus T101HA touchpad
HID: core: Remove extraneous empty line before EXPORT_SYMBOL_GPL(hid_check_keys_pressed)
HID: hid-sensor-custom: Process failure of sensor_hub_set_feature()
HID: i2c-hid: Skip ELAN power-on command after reset
HID: usbhid: fix info leak in hid_submit_ctrl
HID: Add BUS_VIRTUAL to hid_connect logging
HID: multitouch: set Stylus suffix for Stylus-application devices, too
HID: multitouch: require Finger field to mark Win8 reports as MT
HID: remove the unnecessary redefinition of a macro
...
Some models of the RTL8822ce utilize a different USB ID. Add this
new one to the Bluetooth driver.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Some MediaTek SoC platforms with UFSHCI version below 3.0 have incorrect
UFSHCI versions showed in register map.
Fix the version by referring to UniPro version which is always correct.
Link: https://lore.kernel.org/r/20210531062642.12642-1-stanley.chu@mediatek.com
Reviewed-by: Alim Akhtar <alim.akhtar@samsung.com>
Signed-off-by: Stanley Chu <stanley.chu@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Do not drop reference count on vn_port->host in qedf_vport_create()
unconditionally. Instead drop the reference count in qedf_vport_destroy().
Link: https://lore.kernel.org/r/20210521143440.84816-1-dwagner@suse.de
Reported-by: Javed Hasan <jhasan@marvell.com>
Signed-off-by: Daniel Wagner <dwagner@suse.de>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Take the situation with gfxoff, the optimization may cause
corrupt CE ram contents. In addition emit_cntxcntl callback
has similar optimization which firmware can handle properly
even for power feature.
Signed-off-by: Jiansong Chen <Jiansong.Chen@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add AMDGPU_INFO_VBIOS_INFO subquery id for detailed vbios info.
Provides a way for the user application to get the VBIOS
information without having to parse the binary.
It is useful for the user to be able to display in a simple way the VBIOS
version in their system if they happen to encounter an issue.
V2:
Use numeric serial.
Parse and expose vbios version string.
V3:
Remove redundant data in drm_amdgpu_info_vbios struct.
V4:
64 bit alignment in drm_amdgpu_info_vbios.
v5: squash together all the reverts, etc. (Alex)
Signed-off-by: Jiawei Gu <Jiawei.Gu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For 16bpc display support.
Reviewed-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Mario Kleiner <mario.kleiner.de@gmail.com>
Fixes gcc '-Wunused-function' warning:
‘update_dsc_caps’ and ‘apply_dsc_policy_for_stream’ are only used
if 'CONFIG_DRM_AMD_DC_DCN' is defined,
however, it's defined even if 'CONFIG_DRM_AMD_DC_DCN' is not defined.
Thus gcc will report following warning
if 'CONFIG_DRM_AMD_DC_DCN' is not defined:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5572:13: warning:
‘apply_dsc_policy_for_stream’ defined but not used [-Wunused-function]
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:5556:13: warning:
‘update_dsc_caps’ defined but not used [-Wunused-function]
Thus move the definition of ‘update_dsc_caps’ and
‘apply_dsc_policy_for_stream’ inside define macro to fix it.
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Local variable 'i' and 'j' will be initialized in the for loop, so
remove the redundant initialization.
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
define a new macro for_each_new_plane_in_state_reverse to replace
for_each_oldnew_plane_in_state_reverse, so that the unused variable
'old_plane_state' can be removed.
Fix gcc warning:
drivers/gpu/drm/amd/amdgpu/../display/amdgpu_dm/amdgpu_dm.c:10066:26: warning:
variable ‘old_plane_state’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Instead of reading the desired 5 bytes of the actual target field,
the code was reading 8. This could result in a corrupted value if the
trailing 3 bytes were non-zero, so instead use an appropriately sized
and zero-initialized bounce buffer, and read only 5 bytes before casting
to u64.
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the function amdgpu_uvd_cs_msg(), every branch in the switch
statement will have a return, so the code below the switch statement
will not be executed.
Eliminate the follow smatch warning:
drivers/gpu/drm/amd/amdgpu/amdgpu_uvd.c:845 amdgpu_uvd_cs_msg() warn:
ignoring unreachable code.
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Jiapeng Chong <jiapeng.chong@linux.alibaba.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This allows to tie the log message to a specific DRM device.
Signed-off-by: Simon Ser <contact@emersion.fr>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Harry Wentland <hwentlan@amd.com>
Cc: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
table_freed will be always true when mapping a memory with size
bigger than 2MB. The problem is page table's entries are always
existed, but existing mapping depends on page talbe's bo, so
using a check of page table's bo existed will resolve the issue.
Signed-off-by: Eric Huang <jinhuieric.huang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
the memset() and snprintf() is not necessary.
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Re-adjust the function return order to avoid empty sdma version in the
sriov environment. (read amdgpu_firmware_info)
Signed-off-by: Kevin Wang <kevin1.wang@amd.com>
Reviewed-by: Stanley.Yang <Stanley.Yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>