Commit graph

1,031,458 commits

Author SHA1 Message Date
Shaokun Zhang
3f4a8567b5 crypto: nx - Fix typo in comment
Fix typo '@workmem' -> '@wmem'.

Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:46 +08:00
Thara Gopinath
abf790a9b5 MAINTAINERS: Add maintainer for Qualcomm crypto drivers
There is no maintainer for Qualcomm crypto drivers and we are seeing more
development in this area. Add myself as the maintainer so that I can help
in reviewing the changes submitted to these drivers.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:46 +08:00
Thara Gopinath
1339a7c3ba crypto: qce: skcipher: Fix incorrect sg count for dma transfers
Use the sg count returned by dma_map_sg to call into
dmaengine_prep_slave_sg rather than using the original sg count. dma_map_sg
can merge consecutive sglist entries, thus making the original sg count
wrong. This is a fix for memory coruption issues observed while testing
encryption/decryption of large messages using libkcapi framework.

Patch has been tested further by running full suite of tcrypt.ko tests
including fuzz tests.

Signed-off-by: Thara Gopinath <thara.gopinath@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:45 +08:00
Stephan Müller
9b7b94683a crypto: DRBG - switch to HMAC SHA512 DRBG as default DRBG
The default DRBG is the one that has the highest priority. The priority
is defined based on the order of the list drbg_cores[] where the highest
priority is given to the last entry by drbg_fill_array.

With this patch the default DRBG is switched from HMAC SHA256 to HMAC
SHA512 to support compliance with SP800-90B and SP800-90C (current
draft).

The user of the crypto API is completely unaffected by the change.

Signed-off-by: Stephan Mueller <smueller@chronox.de>
Acked-by: simo Sorce <simo@redhat.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:45 +08:00
YueHaibing
98f481f22d hwrng: core - Use DEVICE_ATTR_<RW|RO> macro
Use DEVICE_ATTR_RW()/DEVICE_ATTR_RO() helper instead of
plain DEVICE_ATTR, which makes the code a bit shorter and
easier to read.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:45 +08:00
Ard Biesheuvel
aa22cd7f67 crypto: tcrypt - enable tests for xxhash and blake2
Fill some of the recently freed up slots in tcrypt with xxhash64 and
blake2b/blake2s, so we can easily benchmark their kernel implementations
from user space.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:45 +08:00
Lee Jones
01df08b93e crypto: ccp: ccp-dev: Fix a little doc-rot
Fixes the following W=1 kernel build warning(s):

 drivers/crypto/ccp/ccp-dev.c:476: warning: Function parameter or member 'sp' not described in 'ccp_alloc_struct'
 drivers/crypto/ccp/ccp-dev.c:476: warning: Excess function parameter 'dev' description in 'ccp_alloc_struct'
 drivers/crypto/ccp/ccp-dev.c:476: warning: Function parameter or member 'sp' not described in 'ccp_alloc_struct'
 drivers/crypto/ccp/ccp-dev.c:476: warning: Excess function parameter 'dev' description in 'ccp_alloc_struct'

Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: John Allen <john.allen@amd.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Gary R Hook <gary.hook@amd.com>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:45 +08:00
Lee Jones
c215b51351 crypto: nx: nx-aes-gcm: Kernel-doc formatting should not be used for headers
Fixes the following W=1 kernel build warning(s):

 drivers/crypto/nx/nx-aes-gcm.c:26: warning: Function parameter or member 'tfm' not described in 'gcm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-gcm.c:26: warning: Function parameter or member 'in_key' not described in 'gcm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-gcm.c:26: warning: Function parameter or member 'key_len' not described in 'gcm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-gcm.c:26: warning: expecting prototype for Nest Accelerators driver(). Prototype was for gcm_aes_nx_set_key() instead
 drivers/crypto/nx/nx-aes-ecb.c:24: warning: Function parameter or member 'tfm' not described in 'ecb_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ecb.c:24: warning: Function parameter or member 'in_key' not described in 'ecb_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ecb.c:24: warning: Function parameter or member 'key_len' not described in 'ecb_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ecb.c:24: warning: expecting prototype for Nest Accelerators driver(). Prototype was for ecb_aes_nx_set_key() instead
 drivers/crypto/nx/nx-aes-ccm.c:26: warning: Function parameter or member 'tfm' not described in 'ccm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ccm.c:26: warning: Function parameter or member 'in_key' not described in 'ccm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ccm.c:26: warning: Function parameter or member 'key_len' not described in 'ccm_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ccm.c:26: warning: expecting prototype for Nest Accelerators driver(). Prototype was for ccm_aes_nx_set_key() instead
 drivers/crypto/nx/nx-aes-ctr.c:25: warning: Function parameter or member 'tfm' not described in 'ctr_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ctr.c:25: warning: Function parameter or member 'in_key' not described in 'ctr_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ctr.c:25: warning: Function parameter or member 'key_len' not described in 'ctr_aes_nx_set_key'
 drivers/crypto/nx/nx-aes-ctr.c:25: warning: expecting prototype for Nest Accelerators driver(). Prototype was for ctr_aes_nx_set_key() instead
 drivers/crypto/nx/nx-aes-xcbc.c:22: warning: cannot understand function prototype: 'struct xcbc_state '
 drivers/crypto/nx/nx-sha256.c:21: warning: Function parameter or member 'tfm' not described in 'nx_crypto_ctx_sha256_init'
 drivers/crypto/nx/nx-sha256.c:21: warning: expecting prototype for SHA(). Prototype was for nx_crypto_ctx_sha256_init() instead
 drivers/crypto/nx/nx-sha512.c:20: warning: Function parameter or member 'tfm' not described in 'nx_crypto_ctx_sha512_init'
 drivers/crypto/nx/nx-sha512.c:20: warning: expecting prototype for SHA(). Prototype was for nx_crypto_ctx_sha512_init() instead
 drivers/crypto/nx/nx-842-pseries.c:280: warning: Function parameter or member 'wmem' not described in 'nx842_pseries_compress'
 drivers/crypto/nx/nx-842-pseries.c:280: warning: Excess function parameter 'wrkmem' description in 'nx842_pseries_compress'
 drivers/crypto/nx/nx-842-pseries.c:410: warning: Function parameter or member 'wmem' not described in 'nx842_pseries_decompress'
 drivers/crypto/nx/nx-842-pseries.c:410: warning: Excess function parameter 'wrkmem' description in 'nx842_pseries_decompress'
 drivers/crypto/nx/nx-842-pseries.c:523: warning: Function parameter or member 'devdata' not described in 'nx842_OF_set_defaults'
 drivers/crypto/nx/nx-842-pseries.c:548: warning: Function parameter or member 'prop' not described in 'nx842_OF_upd_status'
 drivers/crypto/nx/nx-842-pseries.c:582: warning: Function parameter or member 'devdata' not described in 'nx842_OF_upd_maxsglen'
 drivers/crypto/nx/nx-842-pseries.c:582: warning: Function parameter or member 'prop' not described in 'nx842_OF_upd_maxsglen'
 drivers/crypto/nx/nx-842-pseries.c:630: warning: Function parameter or member 'devdata' not described in 'nx842_OF_upd_maxsyncop'
 drivers/crypto/nx/nx-842-pseries.c:630: warning: Function parameter or member 'prop' not described in 'nx842_OF_upd_maxsyncop'
 drivers/crypto/nx/nx-842-pseries.c:692: warning: Cannot understand  *
 drivers/crypto/nx/nx-842-pseries.c:825: warning: Function parameter or member 'data' not described in 'nx842_OF_notifier'
 drivers/crypto/nx/nx-842-pseries.c:825: warning: Excess function parameter 'update' description in 'nx842_OF_notifier'

Cc: Haren Myneni <haren@us.ibm.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Jennings <rcj@linux.vnet.ibm.com>
Cc: Seth Jennings <sjenning@linux.vnet.ibm.com>
Cc: linux-crypto@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:45 +08:00
Lee Jones
c4d7d31874 crypto: cavium: Fix a bunch of kernel-doc related issues
Fixes the following W=1 kernel build warning(s):

 drivers/crypto/cavium/nitrox/nitrox_main.c:41: warning: cannot understand function prototype: 'const struct pci_device_id nitrox_pci_tbl[] = '
 drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ndev' not described in 'write_to_ucd_unit'
 drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ucode_size' not described in 'write_to_ucd_unit'
 drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'ucode_data' not described in 'write_to_ucd_unit'
 drivers/crypto/cavium/nitrox/nitrox_main.c:73: warning: Function parameter or member 'block_num' not described in 'write_to_ucd_unit'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'index' not described in 'incr_index'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'count' not described in 'incr_index'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: Function parameter or member 'max' not described in 'incr_index'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:46: warning: expecting prototype for Response codes from SE microcode(). Prototype was for incr_index() instead
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:287: warning: Function parameter or member 'cmdq' not described in 'post_se_instr'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: Function parameter or member 'callback' not described in 'nitrox_process_se_request'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: Function parameter or member 'cb_arg' not described in 'nitrox_process_se_request'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:381: warning: expecting prototype for nitrox_se_request(). Prototype was for nitrox_process_se_request() instead
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:535: warning: Function parameter or member 'cmdq' not described in 'process_response_list'
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:535: warning: expecting prototype for process_request_list(). Prototype was for process_response_list() instead
 drivers/crypto/cavium/nitrox/nitrox_reqmgr.c:584: warning: Function parameter or member 'data' not described in 'pkt_slc_resp_tasklet'
 drivers/crypto/cavium/nitrox/nitrox_mbx.c:14: warning: cannot understand function prototype: 'enum mbx_msg_type '
 drivers/crypto/cavium/nitrox/nitrox_mbx.c:24: warning: cannot understand function prototype: 'enum mbx_msg_opcode '
 drivers/crypto/cavium/nitrox/nitrox_skcipher.c:26: warning: cannot understand function prototype: 'const struct nitrox_cipher flexi_cipher_table[] = '
 drivers/crypto/cavium/cpt/cptpf_main.c:411: warning: Function parameter or member 'cpt' not described in 'cpt_unload_microcode'
 drivers/crypto/cavium/cpt/cptpf_main.c:411: warning: expecting prototype for Ensure all cores are disengaged from all groups by(). Prototype was for cpt_unload_microcode() instead
 drivers/crypto/cavium/cpt/cptvf_reqmanager.c:17: warning: Function parameter or member 'q' not described in 'get_free_pending_entry'
 drivers/crypto/cavium/cpt/cptvf_reqmanager.c:17: warning: Function parameter or member 'qlen' not described in 'get_free_pending_entry'

Cc: George Cherian <gcherian@marvell.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: linux-crypto@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:44 +08:00
Shaokun Zhang
cb028f1662 hwrng: core - remove redundant initialization of variable err
'err' will be assigned later and cleanup the redundant initialization.

Cc: PrasannaKumar Muralidharan <prasannatsmkumar@gmail.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Shaokun Zhang <zhangshaokun@hisilicon.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:44 +08:00
Wei Yongjun
5c0ecc2e81 crypto: qce - Fix some error handling path
Fix to return negative error code from the error handling
cases instead of 0.

Fixes: 9363efb418 ("crypto: qce - Add support for AEAD algorithms")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:44 +08:00
Hui Tang
3083654833 crypto: khazad,wp512 - remove leading spaces before tabs
There are a few leading spaces before tabs and remove it by running the
following commard:

	$ find . -name '*.c' | xargs sed -r -i 's/^[ ]+\t/\t/'

At the same time, fix two warning by running checkpatch.pl:
	WARNING: suspect code indent for conditional statements (16, 16)
	WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Hui Tang <tanghui20@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 15:11:44 +08:00
Zhen Lei
155f7d321f crypto: header - Fix spelling errors
Fix some spelling mistakes in comments:
cipherntext ==> ciphertext
syncronise ==> synchronise
feeded ==> fed

Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 14:21:08 +08:00
Juerg Haefliger
11e0ca8f02 hwrng: Kconfig - Remove leading spaces
Remove leading spaces before tabs in Kconfig file(s) by running the
following command:

  $ find drivers/char/hw_random -name 'Kconfig*' | x\
    args sed -r -i 's/^[ ]+\t/\t/'

Signed-off-by: Juerg Haefliger <juergh@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 14:21:08 +08:00
Jack Xu
9afe77cf25 crypto: qat - remove unused macro in FW loader
Remove the unused macro ICP_DH895XCC_PESRAM_BAR_SIZE in the firmware
loader.

This is to fix the following warning when compiling the driver using the
clang compiler with CC=clang W=2:

    drivers/crypto/qat/qat_common/qat_uclo.c:345:9: warning: macro is not used [-Wunused-macros]

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 14:20:40 +08:00
Jack Xu
96b5722920 crypto: qat - check return code of qat_hal_rd_rel_reg()
Check the return code of the function qat_hal_rd_rel_reg() and return it
to the caller.

This is to fix the following warning when compiling the driver with
clang scan-build:

    drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 14:20:40 +08:00
Jack Xu
78b4267a15 crypto: qat - report an error if MMP file size is too large
Change the return status to error if MMP file size is too large so the
driver load fails early if a large MMP firmware is loaded.

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 14:20:40 +08:00
Jack Xu
b9f7c36de9 crypto: qat - check MMP size before writing to the SRAM
Change "sram_visible" to "mmp_sram_size" and compare it with the MMP
size to prevent an overly large MMP file being written to SRAM.

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 14:20:40 +08:00
Jack Xu
fc9818e6c5 crypto: qat - return error when failing to map FW
Save the return value of qat_uclo_map_auth_fw() function so that the
function qat_uclo_wr_mimage() could return the correct value.
This way, the procedure of adf_gen2_ae_fw_load() function could stop
and exit properly by checking the return value of qat_uclo_wr_mimage().

Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2021-05-28 14:20:40 +08:00
Yassine Oudjana
e50f4bda75 dt-bindings: remoteproc: qcom: pas: Add power domains for MSM8996
Add MSM8996 compatible strings to CX and SSC-CX power domains.

This depends on: "dt-bindings: remoteproc: qcom: pas: Convert binding to YAML"
https://lore.kernel.org/linux-arm-msm/20210505082200.32635-1-manivannan.sadhasivam@linaro.org/T/#u

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Link: https://lore.kernel.org/r/lRf8M7F6Qo9s7tlx6vuAWHThg26ls3u6SvQn1PLrAdI@cp4-web-038.plabs.ch
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 22:37:43 -05:00
Manivannan Sadhasivam
cf107e98d0 dt-bindings: remoteproc: qcom: pas: Convert binding to YAML
Convert Qualcomm ADSP Remoteproc devicetree binding to YAML.

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Link: https://lore.kernel.org/r/20210505082200.32635-1-manivannan.sadhasivam@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 22:37:19 -05:00
Christophe JAILLET
34c4da6d5d remoteproc: k3-r5: Fix an error message
'ret' is known to be 0 here.
Reorder the code so that the expected error code is printed.

Acked-by: Suman Anna <s-anna@ti.com>
Fixes: 6dedbd1d54 ("remoteproc: k3-r5: Add a remoteproc driver for R5F subsystem")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/d6e29d903b48957bf59c67229d54b0fc215e31ae.1620333870.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 22:36:55 -05:00
Dave Airlie
aeeb517368 Merge tag 'drm-intel-fixes-2021-05-27' of ssh://git.freedesktop.org/git/drm/drm-intel into drm-fixes
drm/i915 fixes for v5.13-rc4:
- Re-enable LTTPR non-transparent LT mode for DPCD_REV<1.4

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/875yz4bnmj.fsf@intel.com
2021-05-28 13:28:18 +10:00
Arnd Bergmann
3e25e407a1 remoteproc: stm32: fix phys_addr_t format string
A phys_addr_t may be wider than an int or pointer:

drivers/remoteproc/stm32_rproc.c: In function 'stm32_rproc_da_to_pa':
drivers/remoteproc/stm32_rproc.c:583:30: error: format '%x' expects argument of type 'unsigned int', but argument 5 has type 'phys_addr_t' {aka 'long long unsigned int'} [-Werror=format=]
  583 |                 dev_dbg(dev, "da %llx to pa %#x\n", da, *pa);

Print it by reference using the special %pap format string.

Reviewed-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Fixes: 8a471396d2 ("remoteproc: stm32: Move resource table setup to rproc_ops")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20210421140053.3727528-1-arnd@kernel.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 22:27:28 -05:00
Dave Airlie
b26389e854 A fix in meson for a crash at shutdown and one for TTM to prevent
irrelevant swapout
 -----BEGIN PGP SIGNATURE-----
 
 iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCYK+LpgAKCRDj7w1vZxhR
 xQpPAQDGiLT6DMi3bnnPydqCyZZfkSy4lXNflOeoRe34eAcCSgD+KfQR2gaHJoA0
 T4YbzZB21ZbxZFomjo+WNv0WYtImSgY=
 =24lG
 -----END PGP SIGNATURE-----

Merge tag 'drm-misc-fixes-2021-05-27' of ssh://git.freedesktop.org/git/drm/drm-misc into drm-fixes

A fix in meson for a crash at shutdown and one for TTM to prevent
irrelevant swapout

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527120828.3w7f53krzkslc4ii@gilmour
2021-05-28 13:24:42 +10:00
Wilken Gottwalt
3c881e05c8 hwspinlock: add sun6i hardware spinlock support
Adds the sun6i_hwspinlock driver for the hardware spinlock unit found in
most of the sun6i compatible SoCs.

This unit provides at least 32 spinlocks in hardware. The implementation
supports 32, 64, 128 or 256 32bit registers. A lock can be taken by
reading a register and released by writing a 0 to it. This driver
supports all 4 spinlock setups, but for now only the first setup (32
locks) seem to exist in available devices. This spinlock unit is shared
between all ARM cores and the embedded companion core. All of them can
take/release a lock with a single cycle operation. It can be used to
sync access to devices shared by the ARM cores and the companion core.

There are two ways to check if a lock is taken. The first way is to read
a lock. If a 0 is returned, the lock was free and is taken now. If an 1
is returned, the caller has to try again. Which means the lock is taken.
The second way is to read a 32bit wide status register where every bit
represents one of the 32 first locks. According to the datasheets this
status register supports only the 32 first locks. This is the reason the
first way (lock read/write) approach is used to be able to cover all 256
locks in future devices. The driver also reports the amount of supported
locks via debugfs.

Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/bfd2b97307c2321b15c09683f4bd5e1fcc792f13.1615713499.git.wilken.gottwalt@posteo.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 22:19:42 -05:00
Wilken Gottwalt
f9e784dcb6 dt-bindings: hwlock: add sun6i_hwspinlock
Adds documentation on how to use the sun6i_hwspinlock driver for sun6i
compatible series SoCs.

Reviewed-by: Samuel Holland <samuel@sholland.org>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Signed-off-by: Wilken Gottwalt <wilken.gottwalt@posteo.net>
Link: https://lore.kernel.org/r/b7a1f5532e0ae474473858055fd9bbabff9e1449.1615713499.git.wilken.gottwalt@posteo.net
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 22:19:37 -05:00
Suman Anna
ee99ee7c92 remoteproc: k3-r5: Extend support to R5F clusters on AM64x SoCs
The K3 AM64x SoC family has a revised R5F sub-system and contains a
subset of the R5F clusters present on J721E SoCs. The K3 AM64x SoCs
only have two dual-core Arm R5F clusters/subsystems with 2 R5F cores
each present within the MAIN voltage domain (MAIN_R5FSS0 & MAIN_R5FSS1).

The revised IP has the following distinct features:
 1. The R5FSS IP supports a new "Single-CPU" mode instead of the LockStep
    mode on existing SoCs (AM65x, J721E or J7200). This mode is similar
    to LockStep-mode on J7200 SoCs in terms of TCM usage without the
    fault-tolerant safety feature provided by the LockStep mode.

    The Core1 TCMs are combined with the Core0 TCMs effectively doubling
    the amount of TCMs available in Single-CPU mode. The LockStep-mode
    on previous AM65x and J721E SoCs could only use the Core0 TCMs. These
    combined TCMs appear contiguous at the respective Core0 TCM addresses.
    The code though is executed only on a single CPU (on Core0), and as
    such, requires the halt signal to be programmed only for Core0, while
    the resets need to be managed for both the cores.

 2. TCMs are auto-initialized during module power-up, and the behavior
    is programmable through a MMR bit. This feature is the same as on
    the recent J7200 SoCs.

Extend the support to these clusters in the K3 R5F remoteproc driver
using AM64x specific compatibles. New TI-SCI flags and a unique cluster
mode are also needed for the cluster mode detection on these SoCs. The
reset assert and deassert sequence of both the cores in Single-CPU mode
is agnostic of the order, so the same LockStep reset and release sequences
are re-used.

The integration of these clusters is very much similar to existing SoCs
otherwise.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210327143117.1840-3-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 22:15:21 -05:00
Bjorn Andersson
fee613a6fe v5.13-rc1 + 20210327143117.1840-2-s-anna@ti.com
-----BEGIN PGP SIGNATURE-----
 
 iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmCwYBQbHGJqb3JuLmFu
 ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3F0NkQANrKxSxTDFDs1ueQ+ndo
 GmgYUr+/w8gatu4Sl79vz+Hu9PL5vpymPdbaTEUahZbovnLKrcLAyfqY4FgCaYrv
 AE5Ch54QKiaBqfXpYizmhuxCzs99o+3rqAwpBLXW6YvYlRbIUkJhg79n9uI7hq7n
 oeQZE1SI1You8sXzk1mFBvRS1LNzwx1TqAUtnD72iCqX5KCQQTd1DoeiTyxHNW4N
 +p0bRbVAQ5B56apN21/Dmf47yTkg/csjSA+A/b3IAOYrOmxm5KzRFe4Qlro6Z1jr
 ud0HiQ0ri4rguybZHNcPNhqvj9JOr0DCNxRodfIIIgIC5Ji+2Vh821Wg5h/fbaBD
 xaFUuY0vi5KIOLkhQ8Mj80czw6fcMf522qhR+VjIbHIG+6MvokiTL2mbFfD+Tj8l
 QDmffGet4oN/r9aY7iQziVSJ8xeS1hujRL1WF/vtVLWKQSrVmCNLeJ0lIf61PIyF
 B2kspaWDNVKIhRgfxBfPB6iEE6GIwxv0fljaX9y9vWj3NhEHjbEza0A0GHOWaPF2
 zTCg4dPE6/t2X3MUs5xf2Z4RgbvT8GhnqoOVlt90A2eNDPuICtOTbQ22aYnw9heK
 3tLJ16WfOzZAa5AL3smqq9VhvfH1igaJc2w+UVIJqZzQW43Wk27f5dAp28qSAtsM
 xsBT+GmU7i9DBYTxWNoVzPH5
 =HXi6
 -----END PGP SIGNATURE-----

Merge tag '20210327143117.1840-2-s-anna@ti.com' into rproc-next

v5.13-rc1 + 20210327143117.1840-2-s-anna@ti.com
2021-05-27 22:15:00 -05:00
Suman Anna
c16ced60f3 dt-bindings: remoteproc: k3-r5f: Update bindings for AM64x SoCs
The K3 AM64x SoCs have two dual-core Arm R5F clusters/subsystems, with
2 R5F cores each, both in the MAIN voltage domain.

These clusters are a revised IP version compared to those present on
J721E and J7200 SoCs, and supports a new "Single-CPU" mode instead of
LockStep mode. Update the K3 R5F remoteproc bindings with the compatible
info relevant to these R5F clusters/subsystems on K3 AM64x SoCs.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210327143117.1840-2-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 22:10:22 -05:00
Suman Anna
f286743400 remoteproc: Fix various kernel-doc warnings
Fix all the kernel-doc warnings in various remoteproc core files.
Some of them just needed a formatting cleanup change, while others
needed the Return statement to be added, or documenting the missed
structure elements.

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210519180304.23563-3-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 22:07:43 -05:00
Suman Anna
95347e7348 remoteproc: Add kernel-doc comment for is_iomem
Add a kernel-doc comment for the is_iomem function argument in
rproc_da_to_va(). This fixes a warning generated when building
the remoteproc_core with W=1,
  warning: Function parameter or member 'is_iomem' not described in 'rproc_da_to_va'

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Suman Anna <s-anna@ti.com>
Link: https://lore.kernel.org/r/20210519180304.23563-2-s-anna@ti.com
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-27 21:53:58 -05:00
Dario Binacchi
07d5136f9b docs/pinctrl: fix the reference to the u300 platform
With commit ce1380c9f4 ("ARM: remove u300 platform") it is wrong to
use arch/arm/mach-u300/Kconfig file as example. Since the u300 platform
has been replaced by the u8500, let's use its Kconfig as example.

Signed-off-by: Dario Binacchi <dariobin@libero.it>
Link: https://lore.kernel.org/r/20210527201309.13308-1-dariobin@libero.it
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28 02:59:40 +02:00
Phil Elwell
4bc80da533 pinctrl: bcm2835: Accept fewer than expected IRQs
The downstream .dts files only request two GPIO IRQs. Truncate the
array of parent IRQs when irq_of_parse_and_map returns 0.

Signed-off-by: Phil Elwell <phil@raspberrypi.com>
Signed-off-by: Ivan T. Ivanov <iivanov@suse.de>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20210521090158.26932-1-iivanov@suse.de
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28 02:56:13 +02:00
Namhyung Kim
c673b7f59e perf stat: Fix error check for bpf_program__attach
It seems the bpf_program__attach() returns a negative error code instead
of a NULL pointer in case of error.

Fixes: 7fac83aaf2 ("perf stat: Introduce 'bperf' to share hardware PMCs with BPF")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Link: http://lore.kernel.org/lkml/20210527220052.1657578-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
2021-05-27 21:51:21 -03:00
Yang Li
b9045af9fb pinctrl: Fix kernel-doc
Fix function name in pinctrl-single.c kernel-doc comment
to remove a warning found by clang_w1.

drivers/pinctrl/pinctrl-single.c:1523: warning: expecting prototype for
pcs_irq_handle(). Prototype was for pcs_irq_chain_handler() instead.

Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Link: https://lore.kernel.org/r/1621998464-10918-1-git-send-email-yang.lee@linux.alibaba.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28 02:42:10 +02:00
Jakub Kicinski
af9207adb6 mlx5-updates-2021-05-26
Misc update for mlx5 driver,
 
 1) Clean up patches for lag and SF
 
 2) Reserve bit 31 in steering register C1 for IPSec offload usage
 
 3) Move steering tables pool logic into the steering core and
   increase the maximum table size to 2G entries when software steering
   is enabled.
 -----BEGIN PGP SIGNATURE-----
 
 iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAmCv6vAACgkQSD+KveBX
 +j6qnAgAz0eKWKCsFCqlXGIgF1cg3FrGR5W2Zi5euriHhHwNqnZof3AIMkzcXjLL
 wBlPjWk3YLfBaBNPTziz6EJuGl1vZZxuSdc7bqsNnl0srujRtQFu3JyerdgXEXNL
 W2NxjSTiVwu8lq2qlYauQvcE0v+JrB/LMe9tvq1UQ2v9FtBMMhs9hGUSCro2huwj
 XYF0m0ve89+mYlm6/m0SIUpPVdMiIhm4+coO1wibk7+8jn6+ZT6EJbbZvjc9eQg7
 ZKr8f/TpfmvHToG8LPOc6HqHzRiHlp3Yzsft+xm54r082n4F/noGhL+Hqvvj1aTj
 C6Ip5N7VkzT+erMLMrjIbrmEP94cyQ==
 =torZ
 -----END PGP SIGNATURE-----

Merge tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2021-05-26

Misc update for mlx5 driver,

1) Clean up patches for lag and SF

2) Reserve bit 31 in steering register C1 for IPSec offload usage

3) Move steering tables pool logic into the steering core and
  increase the maximum table size to 2G entries when software steering
  is enabled.

* tag 'mlx5-updates-2021-05-26' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: Fix lag port remapping logic
  net/mlx5: Use boolean arithmetic to evaluate roce_lag
  net/mlx5: Remove unnecessary spin lock protection
  net/mlx5: Cap the maximum flow group size to 16M entries
  net/mlx5: DR, Set max table size to 2G entries
  net/mlx5: Move chains ft pool to be used by all firmware steering
  net/mlx5: Move table size calculation to steering cmd layer
  net/mlx5: Add case for FS_FT_NIC_TX FT in MLX5_CAP_FLOWTABLE_TYPE
  net/mlx5: DR, Remove unused field of send_ring struct
  net/mlx5e: RX, Remove unnecessary check in RX CQE compression handling
  net/mlx5e: IPsec/rep_tc: Fix rep_tc_update_skb drops IPsec packet
  net/mlx5e: TC: Reserved bit 31 of REG_C1 for IPsec offload
  net/mlx5e: TC: Use bit counts for register mapping
  net/mlx5: CT: Avoid reusing modify header context for natted entries
  net/mlx5e: CT, Remove newline from ct_dbg call
====================

Link: https://lore.kernel.org/r/20210527185624.694304-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27 17:14:23 -07:00
Niklas Schnelle
ea4aae0597 PCI: Print a debug message on PCI device release
Commit 6279504141 ("PCI: enhance physical slot debug information") added
a debug print on releasing the PCI slot and another message on destroying
it. There is however no debug print on releasing the PCI device structure
itself and even with closely looking at the kernel log during hotplug
testing, I overlooked several missing pci_dev_put() calls for way too long.

Add a debug print in pci_release_dev() making it much easier to spot when
the PCI device structure is not released when it is supposed to be.

Link: https://lore.kernel.org/r/20210311132312.2882425-1-schnelle@linux.ibm.com
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2021-05-27 18:57:52 -05:00
Yang Li
0a470c843d x86/pci: Return true/false (not 1/0) from bool functions
Return boolean values ("true" or "false") instead of 1 or 0 from bool
functions.  This fixes the following warnings from coccicheck:

  ./arch/x86/pci/mmconfig-shared.c:464:9-10: WARNING: return of 0/1 in function 'is_mmconf_reserved' with return type bool
  ./arch/x86/pci/mmconfig-shared.c:493:5-6: WARNING: return of 0/1 in function 'is_mmconf_reserved' with return type bool
  ./arch/x86/pci/mmconfig-shared.c:501:9-10: WARNING: return of 0/1 in function 'is_mmconf_reserved' with return type bool
  ./arch/x86/pci/mmconfig-shared.c:522:5-6: WARNING: return of 0/1 in function 'is_mmconf_reserved' with return type bool

Link: https://lore.kernel.org/r/1615794000-102771-1-git-send-email-yang.lee@linux.alibaba.com
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-05-27 18:51:17 -05:00
Steven Lee
0b97148459 pinctrl: pinctrl-aspeed-g6: Add sgpio pinctrl settings
AST2600 supports 2 SGPIO master interfaces and 2 SGPIO slave interfaces.
Current pinctrl driver only define the first sgpio master and slave
interfaces.
The second SGPIO master and slave interfaces should be added in
pinctrl driver as well.

Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210525055308.31069-4-steven_lee@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28 01:47:53 +02:00
Steven Lee
89be5957e7 dt-bindings: pinctrl: Update enum for adding SGPM2 and SGPS2
AST2600 has 2 SGPIO master interfaces one with 128 pins and another one
has 80 pins. It also supports 2 SGPIO slave interfaces.
In the current bindings, there are only SGPM1 and SGPS1 defined in enum,
SGPM2 and SGPS2 should also be added in the bindings.

Signed-off-by: Steven Lee <steven_lee@aspeedtech.com>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Link: https://lore.kernel.org/r/20210525055308.31069-2-steven_lee@aspeedtech.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2021-05-28 01:44:47 +02:00
Dave Airlie
ac6e9e3d19 Merge tag 'amd-drm-fixes-5.13-2021-05-26' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.13-2021-05-26:

amdgpu:
- MultiGPU fan fix
- VCN powergating fixes

amdkfd:
- Fix SDMA register offset error

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210527031831.4057-1-alexander.deucher@amd.com
2021-05-28 09:18:04 +10:00
Yicong Yang
95ea953961 PCI/AER: Use consistent format when printing PCI device
We use format domain🚌slot.function when printing PCI device.  Use
consistent format in AER messages.

[bhelgaas: also drop "AER recover:" prefix since we already have an "AER:"
prefix from pr_fmt()]
Link: https://lore.kernel.org/r/1617015721-51701-1-git-send-email-yangyicong@hisilicon.com
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Krzysztof Wilczyński <kw@linux.com>
2021-05-27 18:17:25 -05:00
Gustavo A. R. Silva
eefa5311c3 ixgbe: Fix out-bounds warning in ixgbe_host_interface_command()
Replace union with a couple of pointers in order to fix the following
out-of-bounds warning:

  CC [M]  drivers/net/ethernet/intel/ixgbe/ixgbe_common.o
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c: In function ‘ixgbe_host_interface_command’:
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3729:13: warning: array subscript 1 is above array bounds of ‘u32[1]’ {aka ‘unsigned int[1]’} [-Warray-bounds]
 3729 |   bp->u32arr[bi] = IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, bi);
      |   ~~~~~~~~~~^~~~
drivers/net/ethernet/intel/ixgbe/ixgbe_common.c:3682:7: note: while referencing ‘u32arr’
 3682 |   u32 u32arr[1];
      |       ^~~~~~

This helps with the ongoing efforts to globally enable -Warray-bounds.

Link: https://github.com/KSPP/linux/issues/109
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Tested-by: Dave Switzer <david.switzer@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20210527173424.362456-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27 16:10:00 -07:00
Jakub Kicinski
cf5e129749 Merge branch 'add-4-rx-tx-queue-support-for-mikrotik-10-25g-nic'
Gatis Peisenieks says:

====================
add 4 RX/TX queue support for Mikrotik 10/25G NIC

More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance.
This patch set adds support for 4 RX/TX queues available on
Mikrotik 10/25G NIC.

v4:
    - addressed comments from Jakub Kicinski:
      - split up the change in more manageable chunks
      - changed member order in structs for tighter packing
      - fixed style issues
    - reverted to calling napi_alloc_skb only from within poll
      as before
v3:
    - fix kernel-doc complaints on comments as pointed out by
      David Miller
v2:
    - rebase on net-next master as requested by David Miller
====================

Link: https://lore.kernel.org/r/20210527144423.3395719-1-gatis@mikrotik.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27 16:06:49 -07:00
Gatis Peisenieks
057f4af2b1 atl1c: add 4 RX/TX queue support for Mikrotik 10/25G NIC
More RX/TX queues on a network card help spread the CPU load among
cores and achieve higher overall networking performance. The new
Mikrotik 10/25G NIC supports 4 RX and 4 TX queues. TX queues are
treated with equal priority. RX queue balancing is fixed based on
L2/L3/L4 hash.

This adds support for 4 RX/TX queues while maintaining backwards
compatibility with older hardware.

Simultaneous TX + RX performance on AMD Threadripper 3960X
with Mikrotik 10/25G NIC improved from 1.6Mpps to 3.2Mpps per port.

Backwards compatiblitiy was verified with AR8151 and AR8131 based
NICs.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27 16:06:46 -07:00
Gatis Peisenieks
8042824a3c atl1c: prepare for multiple rx queues
Move napi and other per queue members into per rx queue struct.
Allocate max rx queues that any hw supported by the driver might have.
Patch that actually enables multiple rx queues will follow.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27 16:06:46 -07:00
Gatis Peisenieks
20a1b6bdca atl1c: move tx napi into tpd_ring
To get more performance from using multiple tx queues one needs
a per tx queue napi.

Move tx napi from per adapter struct into per tx queue struct.
Patch that actually enables multiple tx queues will follow.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27 16:06:46 -07:00
Gatis Peisenieks
bf3be85dbe atl1c: detect NIC type early
To support NICs that allow for more than one tx queue it is
required to detect NIC type early during probe. This is moves
NIC type detection before netdev_alloc to prepare for that.

Signed-off-by: Gatis Peisenieks <gatis@mikrotik.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27 16:06:46 -07:00
Jakub Kicinski
44991d61aa Merge git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf
Pablo Neira Ayuso says:

====================
Netfilter/IPVS fixes for net

The following patchset contains Netfilter/IPVS fixes for net:

1) Fix incorrect sockopts unregistration from error path,
   from Florian Westphal.

2) A few patches to provide better error reporting when missing kernel
   netfilter options are missing in .config.

3) Fix dormant table flag updates.

4) Memleak in IPVS  when adding service with IP_VS_SVC_F_HASHED flag.

* git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nf:
  ipvs: ignore IP_VS_SVC_F_HASHED flag when adding service
  netfilter: nf_tables: fix table flag updates
  netfilter: nf_tables: extended netlink error reporting for chain type
  netfilter: nf_tables: missing error reporting for not selected expressions
  netfilter: conntrack: unregister ipv4 sockopts on error unwind
====================

Link: https://lore.kernel.org/r/20210527190115.98503-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-05-27 15:54:12 -07:00